Adrian Chadd 2a2441c9fa Add my initial cut at driver-layer ALQ support. ...

I'm using this to debug EDMA TX and RX descriptors and it's really helpful
to have a non-printf() way to decode frames.

I won't link this into the build until I've tidied it up a little more.

This will eventually be behind ATH_DEBUG_ALQ.

2012-11-08 18:07:29 +00:00

..

ath_dfs/null

Disable strong signal diversity when enabling radar pulse detection

2012-09-02 05:01:10 +00:00

ath_hal

Add new HAL configuration features for the updated AR9300 HAL.

2012-11-07 06:23:23 +00:00

ath_rate

I've had some feedback that CCK rates are more reliable than MCS 0

2012-10-31 06:35:50 +00:00

ah_osdep.c

Fix the HAL debugging to only use one bit to mark a message as unmaskable.

2012-07-01 02:34:32 +00:00

ah_osdep.h

Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.

2012-08-05 10:12:27 +00:00

if_ath_ahb.c

I give up - introduce a TX lock to serialise TX operations.

2012-10-31 06:27:58 +00:00

if_ath_alq.c

Add my initial cut at driver-layer ALQ support.

2012-11-08 18:07:29 +00:00

if_ath_alq.h

Add my initial cut at driver-layer ALQ support.

2012-11-08 18:07:29 +00:00

if_ath_beacon.c

Extend the beacon code slightly to support AP mode beaconing for the

2012-08-11 23:26:19 +00:00

if_ath_beacon.h

Extend the beacon code slightly to support AP mode beaconing for the

2012-08-11 23:26:19 +00:00

if_ath_debug.c

TX EDMA debugging fixes:

2012-11-05 07:08:45 +00:00

if_ath_debug.h

Add a debug method to dump the EDMA TX status descriptor contents out.

2012-11-03 04:53:44 +00:00

if_ath_keycache.c

Add a 'vap' to ath_keyset().

2011-11-08 19:25:52 +00:00

if_ath_keycache.h

Add a 'vap' to ath_keyset().

2011-11-08 19:25:52 +00:00

if_ath_led.c

Bring over the initial 802.11n bluetooth coexistence support code.

2012-06-26 22:16:53 +00:00

if_ath_led.h

Refactor out the software LED config code into a common function, called

2011-12-26 05:46:22 +00:00

if_ath_misc.h

I give up - introduce a TX lock to serialise TX operations.

2012-10-31 06:27:58 +00:00

if_ath_pci.c

I give up - introduce a TX lock to serialise TX operations.

2012-10-31 06:27:58 +00:00

if_ath_rx_edma.c

Convert this to a debug printf; it's working fine now.

2012-11-08 17:32:55 +00:00

if_ath_rx_edma.h

Begin abstracting out the RX path in preparation for RX EDMA support.

2012-07-03 06:59:12 +00:00

if_ath_rx.c

Break the RX processing up into smaller chunks of 128 frames each.

2012-10-14 20:31:38 +00:00

if_ath_rx.h

Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code.

2012-07-10 00:02:19 +00:00

if_ath_sysctl.c

Migrate the ath(4) KTR logging to use an ATH_KTR() macro.

2012-09-24 20:35:56 +00:00

if_ath_sysctl.h

Break out most of the HAL related tweaks into a per-HAL instance,

2011-06-23 02:38:36 +00:00

if_ath_tdma.c

Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.

2012-05-20 02:49:42 +00:00

if_ath_tdma.h

Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.

2012-05-20 02:49:42 +00:00

if_ath_tsf.h

Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].

2012-05-20 02:05:10 +00:00

if_ath_tx_edma.c

Oops, fix bogus spacing.

2012-11-08 17:46:27 +00:00

if_ath_tx_edma.h

Begin separating out the TX DMA setup in preparation for TX EDMA support.

2012-07-23 03:52:18 +00:00

if_ath_tx_ht.c

For AR9380 NICs - the non-enterprise versions don't support RTS protection

2012-11-03 22:13:42 +00:00

if_ath_tx_ht.h

Introduce TX aggregation and software TX queue management

2011-11-08 22:43:13 +00:00

if_ath_tx.c

Convert the aggregate descriptor path over to use the same API as

2012-11-06 06:19:11 +00:00

if_ath_tx.h

Begin fleshing out some software queue awareness for TIM handling with

2012-10-28 21:13:12 +00:00

if_ath.c

Don't compile in my (not yet committed) ath_alq code unless ATH_DEBUG_ALQ

2012-11-07 16:34:09 +00:00

if_athdfs.h

Change the ath_dfs_process_phy_err() method to take an mbuf rather than

2012-06-24 08:09:06 +00:00

if_athioctl.h

Implement my first cut at filtered frames in aggregation sessions.

2012-09-18 10:14:17 +00:00

if_athrate.h

Create an ioctl API for fetching the current rate control information.

2012-07-20 01:27:20 +00:00

if_athvar.h

Add a new HAL call to extract out the HAL enterprise bits from the

2012-11-03 22:12:35 +00:00