freebsd-nq/sys/powerpc/include
Justin Hibbits 5ccc0779d4 Add an isync to after mtsrin, required by the MPC750 errata
MPC750 User Manual Errata (rev 1) adds a note to C.4.2.2 noting that mtsr,
mtsrin, and mtmsr all require a isync after the instruction and before data
address translation uses any of the segment registers.  This should make FreeBSD
run correctly on the G3 again.

Reported by:	Mark Millard
MFC after:	1 week
2016-11-25 19:36:27 +00:00
..
_align.h
_bus.h
_inttypes.h
_limits.h
_stdint.h
_types.h Follow up to r287014 2015-08-22 07:27:06 +00:00
altivec.h
asm.h Provide support for ELFv2 userland if using a newer compiler (recent clang 2015-12-03 00:10:57 +00:00
atomic.h On PowerPC 64bit, the linux-compat mb() definition is implemented with 2015-11-24 09:13:21 +00:00
bat.h
bus_dma.h Revert r303890 for now here as camdd fails to build on powerpc* 2016-08-11 15:06:12 +00:00
bus.h Increase booke bus max address to 36-bits. 2016-03-18 01:30:58 +00:00
clock.h
counter.h Replace a number of conflations of mp_ncpus and mp_maxid with either 2016-07-06 14:09:49 +00:00
cpu.h Add the SPE feature mask for e500v1 and e500v2 2016-10-29 01:24:30 +00:00
cpufunc.h Add an isync to after mtsrin, required by the MPC750 errata 2016-11-25 19:36:27 +00:00
db_machdep.h
dbdma.h
dump.h
efi.h Fix building on i386 and arm. But 'public domain' headers on the files 2016-10-13 06:56:23 +00:00
elf.h
endian.h
exec.h
float.h Rationalize BSD license on sys/*/include/float.h 2015-08-05 17:05:35 +00:00
floatingpoint.h
fpu.h
frame.h The AIM DAR (data access fault address register) and Book-E DEAR registers 2015-03-04 21:06:57 +00:00
gdb_machdep.h
hid.h Set EN_MAS7_UPDATE HID0 bit for e500 core. 2016-08-07 19:09:56 +00:00
ieee.h
ieeefp.h
in_cksum.h Rationalize BSD license on sys/*/include/in_cksum.h 2015-08-05 19:05:12 +00:00
intr_machdep.h Add support for the Freescale dTSEC DPAA-based ethernet controller. 2016-02-29 03:38:00 +00:00
kdb.h
limits.h
machdep.h Remove booke_enable_l3_cache declaration and remaining definition. 2016-07-17 19:24:28 +00:00
md_var.h Provide support for userland binaries using the new ELFv2 ABI. This is a 2015-11-23 17:07:51 +00:00
memdev.h
metadata.h
mmuvar.h
ofw_machdep.h Implement OF_decode_addr() for arm. Move most of powerpc's implementation 2015-12-21 18:07:32 +00:00
openpicreg.h
openpicvar.h
param.h Create a new MACHINE_ARCH for Freescale PowerPC e500v2 2016-10-22 01:57:15 +00:00
pcb.h Use setjmp() instead of the identical-except-for-having-a-wrong-prototype 2016-01-10 16:42:14 +00:00
pcpu.h Fix the build post-r309017 for MPC85XX/MPC85XXSPE 2016-11-24 20:31:46 +00:00
pio.h
platform.h Extend idle support for newer Book-E cores. 2016-01-01 02:47:40 +00:00
platformvar.h
pmap.h Fix buildworld for powerpc. 2016-11-20 06:10:12 +00:00
pmc_mdep.h Implement hwpmc(4) for Freescale e500 core. 2015-04-18 21:39:17 +00:00
proc.h
profile.h Provide support for userland binaries using the new ELFv2 ABI. This is a 2015-11-23 17:07:51 +00:00
psl.h
pte.h Fix a panic bug that cropped up in the PTE rewrite. 2016-02-16 02:13:55 +00:00
ptrace.h
reg.h Restore the ABI of 'struct fpreg' on powerpc. 2016-02-01 23:12:04 +00:00
reloc.h
resource.h
rtas.h
runq.h
sc_machdep.h
setjmp.h Use setjmp() instead of the identical-except-for-having-a-wrong-prototype 2016-01-10 16:42:14 +00:00
sigframe.h
signal.h
slb.h Deallocate any leftover page table entries in the LPAR at boot. This 2015-03-13 00:08:58 +00:00
smp.h
spr.h Add P1022 and compatible SVR IDs 2016-11-02 03:07:01 +00:00
sr.h
stack.h
stdarg.h
sysarch.h
tlb.h Fix SMP booting for PowerPC Book-E 2016-04-19 01:48:18 +00:00
trap.h Create a new MACHINE_ARCH for Freescale PowerPC e500v2 2016-10-22 01:57:15 +00:00
ucontext.h POSIX states that #include <signal.h> shall make both mcontext_t and 2016-02-12 07:38:19 +00:00
varargs.h
vdso.h
vm.h
vmparam.h Restructure device mappings for Book-E. 2016-04-10 15:48:09 +00:00