freebsd-nq/sys/i386/bios/apm.c
Warner Losh d708737568 APM was calling the suspend process from a timeout. This meant that
other timeouts could not happen while suspending, including timeouts
for things like msleep.  This caused the system to hang on suspend
when the cbb was enabled, since its suspend path powered down the
socket which used a timeout to wait for it to be done.

APM now creates a thread when it is enabled, and deletes the thread
when it is disabled.  This thread takes the place of the timeout by
doing its polling every ~.9s.  When the thread is disabled, it will
wakeup early, otherwise it times out and polls the varius things the
old timeout polled (APM events, suspend delays, etc).

This makes my Sony VAIO 505TS suspend/resume correctly when APM is
enabled (ACPI is black listed on my 505TS).

This will likely fix other problems with the suspend path where
drivers would sleep with msleep and/or do other timeouts.  Maybe
there's some special case code that would use DELAY while suspending
and msleep otherwise that can be revisited and removed.

This was also tested by glebius@, who pointed out that in the patch I
sent him, I'd forgotten apm_saver.c

MFC After: 3 weeks
2006-05-25 23:06:38 +00:00

1565 lines
35 KiB
C

/*-
* APM (Advanced Power Management) BIOS Device Driver
*
* Copyright (c) 1994 UKAI, Fumitoshi.
* Copyright (c) 1994-1995 by HOSOKAWA, Tatsumi <hosokawa@jp.FreeBSD.org>
* Copyright (c) 1996 Nate Williams <nate@FreeBSD.org>
* Copyright (c) 1997 Poul-Henning Kamp <phk@FreeBSD.org>
*
* This software may be used, modified, copied, and distributed, in
* both source and binary form provided that the above copyright and
* these terms are retained. Under no circumstances is the author
* responsible for the proper functioning of this software, nor does
* the author assume any responsibility for damages incurred with its
* use.
*
* Sep, 1994 Implemented on FreeBSD 1.1.5.1R (Toshiba AVS001WD)
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/condvar.h>
#include <sys/eventhandler.h>
#include <sys/fcntl.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/lock.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <sys/poll.h>
#include <sys/power.h>
#include <sys/reboot.h>
#include <sys/selinfo.h>
#include <sys/signalvar.h>
#include <sys/sysctl.h>
#include <sys/syslog.h>
#include <sys/time.h>
#include <sys/uio.h>
#include <machine/apm_bios.h>
#include <machine/clock.h>
#include <machine/endian.h>
#include <machine/pc/bios.h>
#include <machine/cpufunc.h>
#include <machine/segments.h>
#include <machine/stdarg.h>
#include <machine/vm86.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <vm/vm_param.h>
#include <i386/bios/apm.h>
/* Used by the apm_saver screen saver module */
int apm_display(int newstate);
struct apm_softc apm_softc;
static void apm_resume(void);
static int apm_bioscall(void);
static int apm_check_function_supported(u_int version, u_int func);
static int apm_pm_func(u_long, void*, ...);
static u_long apm_version;
int apm_evindex;
#define SCFLAG_ONORMAL 0x0000001
#define SCFLAG_OCTL 0x0000002
#define SCFLAG_OPEN (SCFLAG_ONORMAL|SCFLAG_OCTL)
#define APMDEV(dev) (minor(dev)&0x0f)
#define APMDEV_NORMAL 0
#define APMDEV_CTL 8
#ifdef PC98
extern int bios32_apm98(struct bios_regs *, u_int, u_short);
/* PC98's SMM definition */
#define APM_NECSMM_PORT 0x6b8e
#define APM_NECSMM_PORTSZ 1
#define APM_NECSMM_EN 0x10
static __inline void apm_enable_smm(struct apm_softc *);
static __inline void apm_disable_smm(struct apm_softc *);
int apm_necsmm_addr;
u_int32_t apm_necsmm_mask;
#endif
static struct apmhook *hook[NAPM_HOOK]; /* XXX */
#define is_enabled(foo) ((foo) ? "enabled" : "disabled")
/* Map version number to integer (keeps ordering of version numbers) */
#define INTVERSION(major, minor) ((major)*100 + (minor))
static d_open_t apmopen;
static d_close_t apmclose;
static d_write_t apmwrite;
static d_ioctl_t apmioctl;
static d_poll_t apmpoll;
static struct cdevsw apm_cdevsw = {
.d_version = D_VERSION,
.d_flags = D_NEEDGIANT,
.d_open = apmopen,
.d_close = apmclose,
.d_write = apmwrite,
.d_ioctl = apmioctl,
.d_poll = apmpoll,
.d_name = "apm",
};
static int apm_suspend_delay = 1;
static int apm_standby_delay = 1;
static int apm_swab_batt_minutes = 0;
static int apm_debug = 0;
#define APM_DPRINT(args...) do { \
if (apm_debug) { \
printf(args); \
} \
} while (0)
SYSCTL_INT(_machdep, OID_AUTO, apm_suspend_delay, CTLFLAG_RW, &apm_suspend_delay, 1, "");
SYSCTL_INT(_machdep, OID_AUTO, apm_standby_delay, CTLFLAG_RW, &apm_standby_delay, 1, "");
SYSCTL_INT(_debug, OID_AUTO, apm_debug, CTLFLAG_RW, &apm_debug, 0, "");
TUNABLE_INT("machdep.apm_swab_batt_minutes", &apm_swab_batt_minutes);
SYSCTL_INT(_machdep, OID_AUTO, apm_swab_batt_minutes, CTLFLAG_RW,
&apm_swab_batt_minutes, 0, "Byte swap battery time value.");
#ifdef PC98
static __inline void
apm_enable_smm(sc)
struct apm_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
if (apm_necsmm_addr != 0)
bus_space_write_1(iot, ioh, 0,
(bus_space_read_1(iot, ioh, 0) | ~apm_necsmm_mask));
}
static __inline void
apm_disable_smm(sc)
struct apm_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
if (apm_necsmm_addr != 0)
bus_space_write_1(iot, ioh, 0,
(bus_space_read_1(iot, ioh, 0) & apm_necsmm_mask));
}
#endif
/*
* return 0 if the function successfull,
* return 1 if the function unsuccessfull,
* return -1 if the function unsupported.
*/
static int
apm_bioscall(void)
{
struct apm_softc *sc = &apm_softc;
int errno = 0;
u_int apm_func = sc->bios.r.eax & 0xff;
if (!apm_check_function_supported(sc->intversion, apm_func)) {
APM_DPRINT("apm_bioscall: function 0x%x is not supported in v%d.%d\n",
apm_func, sc->majorversion, sc->minorversion);
return (-1);
}
sc->bios_busy = 1;
#ifdef PC98
set_bios_selectors(&sc->bios.seg, BIOSCODE_FLAG | BIOSDATA_FLAG);
if (bios32_apm98(&sc->bios.r, sc->bios.entry,
GSEL(GBIOSCODE32_SEL, SEL_KPL)) != 0)
return 1;
#else
if (sc->connectmode == APM_PROT32CONNECT) {
set_bios_selectors(&sc->bios.seg,
BIOSCODE_FLAG | BIOSDATA_FLAG);
errno = bios32(&sc->bios.r,
sc->bios.entry, GSEL(GBIOSCODE32_SEL, SEL_KPL));
} else {
errno = bios16(&sc->bios, NULL);
}
#endif
sc->bios_busy = 0;
return (errno);
}
/* check whether APM function is supported (1) or not (0). */
static int
apm_check_function_supported(u_int version, u_int func)
{
/* except driver version */
if (func == APM_DRVVERSION) {
return (1);
}
#ifdef PC98
if (func == APM_GETPWSTATUS) {
return (1);
}
#endif
switch (version) {
case INTVERSION(1, 0):
if (func > APM_GETPMEVENT) {
return (0); /* not supported */
}
break;
case INTVERSION(1, 1):
if (func > APM_ENGAGEDISENGAGEPM &&
func < APM_OEMFUNC) {
return (0); /* not supported */
}
break;
case INTVERSION(1, 2):
break;
}
return (1); /* supported */
}
/* enable/disable power management */
static int
apm_enable_disable_pm(int enable)
{
struct apm_softc *sc = &apm_softc;
sc->bios.r.eax = (APM_BIOS << 8) | APM_ENABLEDISABLEPM;
if (sc->intversion >= INTVERSION(1, 1))
sc->bios.r.ebx = PMDV_ALLDEV;
else
sc->bios.r.ebx = 0xffff; /* APM version 1.0 only */
sc->bios.r.ecx = enable;
sc->bios.r.edx = 0;
return (apm_bioscall());
}
/* register driver version (APM 1.1 or later) */
static int
apm_driver_version(int version)
{
struct apm_softc *sc = &apm_softc;
sc->bios.r.eax = (APM_BIOS << 8) | APM_DRVVERSION;
sc->bios.r.ebx = 0x0;
sc->bios.r.ecx = version;
sc->bios.r.edx = 0;
if (apm_bioscall() == 0 && sc->bios.r.eax == version)
return (0);
/* Some old BIOSes don't return the connection version in %ax. */
if (sc->bios.r.eax == ((APM_BIOS << 8) | APM_DRVVERSION))
return (0);
return (1);
}
/* engage/disengage power management (APM 1.1 or later) */
static int
apm_engage_disengage_pm(int engage)
{
struct apm_softc *sc = &apm_softc;
sc->bios.r.eax = (APM_BIOS << 8) | APM_ENGAGEDISENGAGEPM;
sc->bios.r.ebx = PMDV_ALLDEV;
sc->bios.r.ecx = engage;
sc->bios.r.edx = 0;
return (apm_bioscall());
}
/* get PM event */
static u_int
apm_getevent(void)
{
struct apm_softc *sc = &apm_softc;
sc->bios.r.eax = (APM_BIOS << 8) | APM_GETPMEVENT;
sc->bios.r.ebx = 0;
sc->bios.r.ecx = 0;
sc->bios.r.edx = 0;
if (apm_bioscall())
return (PMEV_NOEVENT);
return (sc->bios.r.ebx & 0xffff);
}
/* suspend entire system */
static int
apm_suspend_system(int state)
{
struct apm_softc *sc = &apm_softc;
sc->bios.r.eax = (APM_BIOS << 8) | APM_SETPWSTATE;
sc->bios.r.ebx = PMDV_ALLDEV;
sc->bios.r.ecx = state;
sc->bios.r.edx = 0;
#ifdef PC98
apm_disable_smm(sc);
#endif
if (apm_bioscall()) {
printf("Entire system suspend failure: errcode = %d\n",
0xff & (sc->bios.r.eax >> 8));
return 1;
}
#ifdef PC98
apm_enable_smm(sc);
#endif
return 0;
}
/* Display control */
/*
* Experimental implementation: My laptop machine can't handle this function
* If your laptop can control the display via APM, please inform me.
* HOSOKAWA, Tatsumi <hosokawa@jp.FreeBSD.org>
*/
int
apm_display(int newstate)
{
struct apm_softc *sc = &apm_softc;
sc->bios.r.eax = (APM_BIOS << 8) | APM_SETPWSTATE;
sc->bios.r.ebx = PMDV_DISP0;
sc->bios.r.ecx = newstate ? PMST_APMENABLED:PMST_SUSPEND;
sc->bios.r.edx = 0;
if (apm_bioscall() == 0) {
return 0;
}
/* If failed, then try to blank all display devices instead. */
sc->bios.r.eax = (APM_BIOS << 8) | APM_SETPWSTATE;
sc->bios.r.ebx = PMDV_DISPALL; /* all display devices */
sc->bios.r.ecx = newstate ? PMST_APMENABLED:PMST_SUSPEND;
sc->bios.r.edx = 0;
if (apm_bioscall() == 0) {
return 0;
}
printf("Display off failure: errcode = %d\n",
0xff & (sc->bios.r.eax >> 8));
return 1;
}
/*
* Turn off the entire system.
*/
static void
apm_power_off(void *junk, int howto)
{
struct apm_softc *sc = &apm_softc;
/* Not halting powering off, or not active */
if (!(howto & RB_POWEROFF) || !apm_softc.active)
return;
sc->bios.r.eax = (APM_BIOS << 8) | APM_SETPWSTATE;
sc->bios.r.ebx = PMDV_ALLDEV;
sc->bios.r.ecx = PMST_OFF;
sc->bios.r.edx = 0;
(void) apm_bioscall();
}
/* APM Battery low handler */
static void
apm_battery_low(void)
{
printf("\007\007 * * * BATTERY IS LOW * * * \007\007");
}
/* APM hook manager */
static struct apmhook *
apm_add_hook(struct apmhook **list, struct apmhook *ah)
{
int s;
struct apmhook *p, *prev;
APM_DPRINT("Add hook \"%s\"\n", ah->ah_name);
s = splhigh();
if (ah == NULL)
panic("illegal apm_hook!");
prev = NULL;
for (p = *list; p != NULL; prev = p, p = p->ah_next)
if (p->ah_order > ah->ah_order)
break;
if (prev == NULL) {
ah->ah_next = *list;
*list = ah;
} else {
ah->ah_next = prev->ah_next;
prev->ah_next = ah;
}
splx(s);
return ah;
}
static void
apm_del_hook(struct apmhook **list, struct apmhook *ah)
{
int s;
struct apmhook *p, *prev;
s = splhigh();
prev = NULL;
for (p = *list; p != NULL; prev = p, p = p->ah_next)
if (p == ah)
goto deleteit;
panic("Tried to delete unregistered apm_hook.");
goto nosuchnode;
deleteit:
if (prev != NULL)
prev->ah_next = p->ah_next;
else
*list = p->ah_next;
nosuchnode:
splx(s);
}
/* APM driver calls some functions automatically */
static void
apm_execute_hook(struct apmhook *list)
{
struct apmhook *p;
for (p = list; p != NULL; p = p->ah_next) {
APM_DPRINT("Execute APM hook \"%s.\"\n", p->ah_name);
if ((*(p->ah_fun))(p->ah_arg))
printf("Warning: APM hook \"%s\" failed", p->ah_name);
}
}
/* establish an apm hook */
struct apmhook *
apm_hook_establish(int apmh, struct apmhook *ah)
{
if (apmh < 0 || apmh >= NAPM_HOOK)
return NULL;
return apm_add_hook(&hook[apmh], ah);
}
/* disestablish an apm hook */
void
apm_hook_disestablish(int apmh, struct apmhook *ah)
{
if (apmh < 0 || apmh >= NAPM_HOOK)
return;
apm_del_hook(&hook[apmh], ah);
}
static int apm_record_event(struct apm_softc *, u_int);
static void apm_processevent(void);
static u_int apm_op_inprog = 0;
static void
apm_do_suspend(void)
{
struct apm_softc *sc = &apm_softc;
int error;
if (sc == NULL || sc->initialized == 0)
return;
apm_op_inprog = 0;
sc->suspends = sc->suspend_countdown = 0;
error = DEVICE_SUSPEND(root_bus);
if (error)
return;
apm_execute_hook(hook[APM_HOOK_SUSPEND]);
if (apm_suspend_system(PMST_SUSPEND) == 0) {
sc->suspending = 1;
apm_processevent();
} else {
/* Failure, 'resume' the system again */
apm_execute_hook(hook[APM_HOOK_RESUME]);
DEVICE_RESUME(root_bus);
}
return;
}
static void
apm_do_standby(void)
{
struct apm_softc *sc = &apm_softc;
if (sc == NULL || sc->initialized == 0)
return;
apm_op_inprog = 0;
sc->standbys = sc->standby_countdown = 0;
/*
* As far as standby, we don't need to execute
* all of suspend hooks.
*/
if (apm_suspend_system(PMST_STANDBY) == 0)
apm_processevent();
return;
}
static void
apm_lastreq_notify(void)
{
struct apm_softc *sc = &apm_softc;
sc->bios.r.eax = (APM_BIOS << 8) | APM_SETPWSTATE;
sc->bios.r.ebx = PMDV_ALLDEV;
sc->bios.r.ecx = PMST_LASTREQNOTIFY;
sc->bios.r.edx = 0;
apm_bioscall();
}
static int
apm_lastreq_rejected(void)
{
struct apm_softc *sc = &apm_softc;
if (apm_op_inprog == 0) {
return 1; /* no operation in progress */
}
sc->bios.r.eax = (APM_BIOS << 8) | APM_SETPWSTATE;
sc->bios.r.ebx = PMDV_ALLDEV;
sc->bios.r.ecx = PMST_LASTREQREJECT;
sc->bios.r.edx = 0;
if (apm_bioscall()) {
APM_DPRINT("apm_lastreq_rejected: failed\n");
return 1;
}
apm_op_inprog = 0;
return 0;
}
/*
* Public interface to the suspend/resume:
*
* Execute suspend and resume hook before and after sleep, respectively.
*
*/
void
apm_suspend(int state)
{
struct apm_softc *sc = &apm_softc;
if (sc == NULL || sc->initialized == 0)
return;
switch (state) {
case PMST_SUSPEND:
if (sc->suspends)
return;
sc->suspends++;
sc->suspend_countdown = apm_suspend_delay;
break;
case PMST_STANDBY:
if (sc->standbys)
return;
sc->standbys++;
sc->standby_countdown = apm_standby_delay;
break;
default:
printf("apm_suspend: Unknown Suspend state 0x%x\n", state);
return;
}
apm_op_inprog++;
apm_lastreq_notify();
}
static void
apm_resume(void)
{
struct apm_softc *sc = &apm_softc;
if (sc == NULL || sc->initialized == 0 || sc->suspending == 0)
return;
sc->suspending = 0;
apm_execute_hook(hook[APM_HOOK_RESUME]);
DEVICE_RESUME(root_bus);
return;
}
/* get power status per battery */
static int
apm_get_pwstatus(apm_pwstatus_t app)
{
struct apm_softc *sc = &apm_softc;
if (app->ap_device != PMDV_ALLDEV &&
(app->ap_device < PMDV_BATT0 || app->ap_device > PMDV_BATT_ALL))
return 1;
sc->bios.r.eax = (APM_BIOS << 8) | APM_GETPWSTATUS;
sc->bios.r.ebx = app->ap_device;
sc->bios.r.ecx = 0;
sc->bios.r.edx = 0xffff; /* default to unknown battery time */
if (apm_bioscall())
return 1;
app->ap_acline = (sc->bios.r.ebx >> 8) & 0xff;
app->ap_batt_stat = sc->bios.r.ebx & 0xff;
app->ap_batt_flag = (sc->bios.r.ecx >> 8) & 0xff;
app->ap_batt_life = sc->bios.r.ecx & 0xff;
sc->bios.r.edx &= 0xffff;
if (apm_swab_batt_minutes)
sc->bios.r.edx = __bswap16(sc->bios.r.edx) | 0x8000;
if (sc->bios.r.edx == 0xffff) /* Time is unknown */
app->ap_batt_time = -1;
else if (sc->bios.r.edx & 0x8000) /* Time is in minutes */
app->ap_batt_time = (sc->bios.r.edx & 0x7fff) * 60;
else /* Time is in seconds */
app->ap_batt_time = sc->bios.r.edx;
return 0;
}
/* get APM information */
static int
apm_get_info(apm_info_t aip)
{
struct apm_softc *sc = &apm_softc;
struct apm_pwstatus aps;
bzero(&aps, sizeof(aps));
aps.ap_device = PMDV_ALLDEV;
if (apm_get_pwstatus(&aps))
return 1;
aip->ai_infoversion = 1;
aip->ai_acline = aps.ap_acline;
aip->ai_batt_stat = aps.ap_batt_stat;
aip->ai_batt_life = aps.ap_batt_life;
aip->ai_batt_time = aps.ap_batt_time;
aip->ai_major = (u_int)sc->majorversion;
aip->ai_minor = (u_int)sc->minorversion;
aip->ai_status = (u_int)sc->active;
sc->bios.r.eax = (APM_BIOS << 8) | APM_GETCAPABILITIES;
sc->bios.r.ebx = 0;
sc->bios.r.ecx = 0;
sc->bios.r.edx = 0;
if (apm_bioscall()) {
aip->ai_batteries = 0xffffffff; /* Unknown */
aip->ai_capabilities = 0xff00; /* Unknown, with no bits set */
} else {
aip->ai_batteries = sc->bios.r.ebx & 0xff;
aip->ai_capabilities = sc->bios.r.ecx & 0xff;
}
bzero(aip->ai_spare, sizeof aip->ai_spare);
return 0;
}
/* inform APM BIOS that CPU is idle */
void
apm_cpu_idle(void)
{
struct apm_softc *sc = &apm_softc;
if (sc->active) {
sc->bios.r.eax = (APM_BIOS <<8) | APM_CPUIDLE;
sc->bios.r.edx = sc->bios.r.ecx = sc->bios.r.ebx = 0;
(void) apm_bioscall();
}
/*
* Some APM implementation halts CPU in BIOS, whenever
* "CPU-idle" function are invoked, but swtch() of
* FreeBSD halts CPU, therefore, CPU is halted twice
* in the sched loop. It makes the interrupt latency
* terribly long and be able to cause a serious problem
* in interrupt processing. We prevent it by removing
* "hlt" operation from swtch() and managed it under
* APM driver.
*/
if (!sc->active || sc->always_halt_cpu)
halt(); /* wait for interrupt */
}
/* inform APM BIOS that CPU is busy */
void
apm_cpu_busy(void)
{
struct apm_softc *sc = &apm_softc;
/*
* The APM specification says this is only necessary if your BIOS
* slows down the processor in the idle task, otherwise it's not
* necessary.
*/
if (sc->slow_idle_cpu && sc->active) {
sc->bios.r.eax = (APM_BIOS <<8) | APM_CPUBUSY;
sc->bios.r.edx = sc->bios.r.ecx = sc->bios.r.ebx = 0;
apm_bioscall();
}
}
/*
* APM thread loop.
*
* This routine wakes up from time to time to deal with delaying the
* suspend of the system, or other events.
*/
static void
apm_event_thread(void *arg)
{
struct apm_softc *sc = &apm_softc;
sc->running = 1;
while (sc->active) {
if (apm_op_inprog)
apm_lastreq_notify();
if (sc->standbys && sc->standby_countdown-- <= 0)
apm_do_standby();
if (sc->suspends && sc->suspend_countdown-- <= 0)
apm_do_suspend();
if (!sc->bios_busy)
apm_processevent();
mtx_lock(&sc->mtx);
cv_timedwait(&sc->cv, &sc->mtx, 10 * hz / 9);
mtx_unlock(&sc->mtx);
}
sc->running = 0;
kthread_exit(0);
}
/* enable APM BIOS */
static void
apm_event_enable(void)
{
struct apm_softc *sc = &apm_softc;
APM_DPRINT("called apm_event_enable()\n");
if (sc == NULL || sc->initialized == 0)
return;
/* Start the thread */
sc->active = 1;
if (kthread_create(apm_event_thread, sc, &sc->event_thread, 0, 0,
"apm worker"))
panic("Cannot create apm worker thread");
return;
}
/* disable APM BIOS */
static void
apm_event_disable(void)
{
struct apm_softc *sc = &apm_softc;
APM_DPRINT("called apm_event_disable()\n");
if (sc == NULL || sc->initialized == 0)
return;
mtx_lock(&sc->mtx);
sc->active = 0;
while (sc->running) {
cv_broadcast(&sc->cv);
msleep(sc->event_thread, &sc->mtx, PWAIT, "apmdie", 0);
}
mtx_unlock(&sc->mtx);
sc->event_thread = NULL;
return;
}
/* halt CPU in scheduling loop */
static void
apm_halt_cpu(void)
{
struct apm_softc *sc = &apm_softc;
if (sc == NULL || sc->initialized == 0)
return;
sc->always_halt_cpu = 1;
return;
}
/* don't halt CPU in scheduling loop */
static void
apm_not_halt_cpu(void)
{
struct apm_softc *sc = &apm_softc;
if (sc == NULL || sc->initialized == 0)
return;
sc->always_halt_cpu = 0;
return;
}
/* device driver definitions */
/*
* Module event
*/
static int
apm_modevent(struct module *mod, int event, void *junk)
{
switch (event) {
case MOD_LOAD:
if (!cold)
return (EPERM);
break;
case MOD_UNLOAD:
if (!cold && power_pm_get_type() == POWER_PM_TYPE_APM)
return (EBUSY);
break;
default:
break;
}
return (0);
}
/*
* Create "connection point"
*/
static void
apm_identify(driver_t *driver, device_t parent)
{
device_t child;
if (!cold) {
printf("Don't load this driver from userland!!\n");
return;
}
if (resource_disabled("apm", 0))
return;
child = BUS_ADD_CHILD(parent, 0, "apm", 0);
if (child == NULL)
panic("apm_identify");
}
/*
* probe for APM BIOS
*/
static int
apm_probe(device_t dev)
{
#define APM_KERNBASE KERNBASE
struct vm86frame vmf;
struct apm_softc *sc = &apm_softc;
#ifdef PC98
int rid;
#endif
device_set_desc(dev, "APM BIOS");
if (device_get_unit(dev) > 0) {
printf("apm: Only one APM driver supported.\n");
return ENXIO;
}
if (power_pm_get_type() != POWER_PM_TYPE_NONE &&
power_pm_get_type() != POWER_PM_TYPE_APM) {
printf("apm: Other PM system enabled.\n");
return ENXIO;
}
bzero(&vmf, sizeof(struct vm86frame)); /* safety */
bzero(&apm_softc, sizeof(apm_softc));
vmf.vmf_ah = APM_BIOS;
vmf.vmf_al = APM_INSTCHECK;
vmf.vmf_bx = 0;
if (vm86_intcall(APM_INT, &vmf))
return ENXIO; /* APM not found */
if (vmf.vmf_bx != 0x504d) {
printf("apm: incorrect signature (0x%x)\n", vmf.vmf_bx);
return ENXIO;
}
if ((vmf.vmf_cx & (APM_32BIT_SUPPORT | APM_16BIT_SUPPORT)) == 0) {
printf("apm: protected mode connections are not supported\n");
return ENXIO;
}
apm_version = vmf.vmf_ax;
sc->slow_idle_cpu = ((vmf.vmf_cx & APM_CPUIDLE_SLOW) != 0);
sc->disabled = ((vmf.vmf_cx & APM_DISABLED) != 0);
sc->disengaged = ((vmf.vmf_cx & APM_DISENGAGED) != 0);
vmf.vmf_ah = APM_BIOS;
vmf.vmf_al = APM_DISCONNECT;
vmf.vmf_bx = 0;
vm86_intcall(APM_INT, &vmf); /* disconnect, just in case */
#ifdef PC98
/* PC98 have bogos APM 32bit BIOS */
if ((vmf.vmf_cx & APM_32BIT_SUPPORT) == 0)
return ENXIO;
rid = 0;
bus_set_resource(dev, SYS_RES_IOPORT, rid,
APM_NECSMM_PORT, APM_NECSMM_PORTSZ);
sc->sc_res = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
APM_NECSMM_PORT, ~0, APM_NECSMM_PORTSZ, RF_ACTIVE);
if (sc->sc_res == NULL) {
printf("apm: cannot open NEC smm device\n");
return ENXIO;
}
bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_res);
vmf.vmf_ah = APM_BIOS;
vmf.vmf_al = APM_PROT32CONNECT;
vmf.vmf_bx = 0;
if (vm86_intcall(APM_INT, &vmf)) {
printf("apm: 32-bit connection error.\n");
return (ENXIO);
}
sc->bios.seg.code32.base = (vmf.vmf_ax << 4) + APM_KERNBASE;
sc->bios.seg.code32.limit = 0xffff;
sc->bios.seg.code16.base = (vmf.vmf_cx << 4) + APM_KERNBASE;
sc->bios.seg.code16.limit = 0xffff;
sc->bios.seg.data.base = (vmf.vmf_dx << 4) + APM_KERNBASE;
sc->bios.seg.data.limit = 0xffff;
sc->bios.entry = vmf.vmf_ebx;
sc->connectmode = APM_PROT32CONNECT;
#else
if ((vmf.vmf_cx & APM_32BIT_SUPPORT) != 0) {
vmf.vmf_ah = APM_BIOS;
vmf.vmf_al = APM_PROT32CONNECT;
vmf.vmf_bx = 0;
if (vm86_intcall(APM_INT, &vmf)) {
printf("apm: 32-bit connection error.\n");
return (ENXIO);
}
sc->bios.seg.code32.base = (vmf.vmf_ax << 4) + APM_KERNBASE;
sc->bios.seg.code32.limit = 0xffff;
sc->bios.seg.code16.base = (vmf.vmf_cx << 4) + APM_KERNBASE;
sc->bios.seg.code16.limit = 0xffff;
sc->bios.seg.data.base = (vmf.vmf_dx << 4) + APM_KERNBASE;
sc->bios.seg.data.limit = 0xffff;
sc->bios.entry = vmf.vmf_ebx;
sc->connectmode = APM_PROT32CONNECT;
} else {
/* use 16-bit connection */
vmf.vmf_ah = APM_BIOS;
vmf.vmf_al = APM_PROT16CONNECT;
vmf.vmf_bx = 0;
if (vm86_intcall(APM_INT, &vmf)) {
printf("apm: 16-bit connection error.\n");
return (ENXIO);
}
sc->bios.seg.code16.base = (vmf.vmf_ax << 4) + APM_KERNBASE;
sc->bios.seg.code16.limit = 0xffff;
sc->bios.seg.data.base = (vmf.vmf_cx << 4) + APM_KERNBASE;
sc->bios.seg.data.limit = 0xffff;
sc->bios.entry = vmf.vmf_bx;
sc->connectmode = APM_PROT16CONNECT;
}
#endif
return(0);
}
/*
* return 0 if the user will notice and handle the event,
* return 1 if the kernel driver should do so.
*/
static int
apm_record_event(struct apm_softc *sc, u_int event_type)
{
struct apm_event_info *evp;
if ((sc->sc_flags & SCFLAG_OPEN) == 0)
return 1; /* no user waiting */
if (sc->event_count == APM_NEVENTS)
return 1; /* overflow */
if (sc->event_filter[event_type] == 0)
return 1; /* not registered */
evp = &sc->event_list[sc->event_ptr];
sc->event_count++;
sc->event_ptr++;
sc->event_ptr %= APM_NEVENTS;
evp->type = event_type;
evp->index = ++apm_evindex;
selwakeuppri(&sc->sc_rsel, PZERO);
return (sc->sc_flags & SCFLAG_OCTL) ? 0 : 1; /* user may handle */
}
/* Power profile */
static void
apm_power_profile(struct apm_softc *sc)
{
int state;
struct apm_info info;
static int apm_acline = 0;
if (apm_get_info(&info))
return;
if (apm_acline != info.ai_acline) {
apm_acline = info.ai_acline;
state = apm_acline ? POWER_PROFILE_PERFORMANCE : POWER_PROFILE_ECONOMY;
power_profile_set_state(state);
}
}
/* Process APM event */
static void
apm_processevent(void)
{
int apm_event;
struct apm_softc *sc = &apm_softc;
#define OPMEV_DEBUGMESSAGE(symbol) case symbol: \
APM_DPRINT("Received APM Event: " #symbol "\n");
do {
apm_event = apm_getevent();
switch (apm_event) {
OPMEV_DEBUGMESSAGE(PMEV_STANDBYREQ);
if (apm_op_inprog == 0) {
apm_op_inprog++;
if (apm_record_event(sc, apm_event)) {
apm_suspend(PMST_STANDBY);
}
}
break;
OPMEV_DEBUGMESSAGE(PMEV_USERSTANDBYREQ);
if (apm_op_inprog == 0) {
apm_op_inprog++;
if (apm_record_event(sc, apm_event)) {
apm_suspend(PMST_STANDBY);
}
}
break;
OPMEV_DEBUGMESSAGE(PMEV_SUSPENDREQ);
apm_lastreq_notify();
if (apm_op_inprog == 0) {
apm_op_inprog++;
if (apm_record_event(sc, apm_event)) {
apm_do_suspend();
}
}
return; /* XXX skip the rest */
OPMEV_DEBUGMESSAGE(PMEV_USERSUSPENDREQ);
apm_lastreq_notify();
if (apm_op_inprog == 0) {
apm_op_inprog++;
if (apm_record_event(sc, apm_event)) {
apm_do_suspend();
}
}
return; /* XXX skip the rest */
OPMEV_DEBUGMESSAGE(PMEV_CRITSUSPEND);
apm_do_suspend();
break;
OPMEV_DEBUGMESSAGE(PMEV_NORMRESUME);
apm_record_event(sc, apm_event);
apm_resume();
break;
OPMEV_DEBUGMESSAGE(PMEV_CRITRESUME);
apm_record_event(sc, apm_event);
apm_resume();
break;
OPMEV_DEBUGMESSAGE(PMEV_STANDBYRESUME);
apm_record_event(sc, apm_event);
break;
OPMEV_DEBUGMESSAGE(PMEV_BATTERYLOW);
if (apm_record_event(sc, apm_event)) {
apm_battery_low();
apm_suspend(PMST_SUSPEND);
}
break;
OPMEV_DEBUGMESSAGE(PMEV_POWERSTATECHANGE);
apm_record_event(sc, apm_event);
apm_power_profile(sc);
break;
OPMEV_DEBUGMESSAGE(PMEV_UPDATETIME);
apm_record_event(sc, apm_event);
inittodr(0); /* adjust time to RTC */
break;
OPMEV_DEBUGMESSAGE(PMEV_CAPABILITIESCHANGE);
apm_record_event(sc, apm_event);
apm_power_profile(sc);
break;
case PMEV_NOEVENT:
break;
default:
printf("Unknown Original APM Event 0x%x\n", apm_event);
break;
}
} while (apm_event != PMEV_NOEVENT);
#ifdef PC98
apm_disable_smm(sc);
#endif
}
/*
* Attach APM:
*
* Initialize APM driver
*/
static int
apm_attach(device_t dev)
{
struct apm_softc *sc = &apm_softc;
int drv_version;
#ifdef PC98
int rid;
#endif
mtx_init(&sc->mtx, device_get_nameunit(dev), "apm", MTX_DEF);
cv_init(&sc->cv, "cbb cv");
if (device_get_flags(dev) & 0x20)
statclock_disable = 1;
sc->initialized = 0;
/* Must be externally enabled */
sc->active = 0;
/* Always call HLT in idle loop */
sc->always_halt_cpu = 1;
getenv_int("debug.apm_debug", &apm_debug);
/* print bootstrap messages */
APM_DPRINT("apm: APM BIOS version %04lx\n", apm_version);
APM_DPRINT("apm: Code16 0x%08x, Data 0x%08x\n",
sc->bios.seg.code16.base, sc->bios.seg.data.base);
APM_DPRINT("apm: Code entry 0x%08x, Idling CPU %s, Management %s\n",
sc->bios.entry, is_enabled(sc->slow_idle_cpu),
is_enabled(!sc->disabled));
APM_DPRINT("apm: CS_limit=0x%x, DS_limit=0x%x\n",
sc->bios.seg.code16.limit, sc->bios.seg.data.limit);
#ifdef PC98
rid = 0;
sc->sc_res = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
APM_NECSMM_PORT, ~0, APM_NECSMM_PORTSZ, RF_ACTIVE);
if (sc->sc_res == NULL)
panic("%s: counldn't map I/O ports", device_get_name(dev));
sc->sc_iot = rman_get_bustag(sc->sc_res);
sc->sc_ioh = rman_get_bushandle(sc->sc_res);
if (apm_version==0x112 || apm_version==0x111 || apm_version==0x110)
apm_necsmm_addr = APM_NECSMM_PORT;
else
apm_necsmm_addr = 0;
apm_necsmm_mask = ~APM_NECSMM_EN;
#endif /* PC98 */
/*
* In one test, apm bios version was 1.02; an attempt to register
* a 1.04 driver resulted in a 1.00 connection! Registering a
* 1.02 driver resulted in a 1.02 connection.
*/
drv_version = apm_version > 0x102 ? 0x102 : apm_version;
for (; drv_version > 0x100; drv_version--)
if (apm_driver_version(drv_version) == 0)
break;
sc->minorversion = ((drv_version & 0x00f0) >> 4) * 10 +
((drv_version & 0x000f) >> 0);
sc->majorversion = ((drv_version & 0xf000) >> 12) * 10 +
((apm_version & 0x0f00) >> 8);
sc->intversion = INTVERSION(sc->majorversion, sc->minorversion);
if (sc->intversion >= INTVERSION(1, 1))
APM_DPRINT("apm: Engaged control %s\n", is_enabled(!sc->disengaged));
device_printf(dev, "found APM BIOS v%ld.%ld, connected at v%d.%d\n",
((apm_version & 0xf000) >> 12) * 10 + ((apm_version & 0x0f00) >> 8),
((apm_version & 0x00f0) >> 4) * 10 + ((apm_version & 0x000f) >> 0),
sc->majorversion, sc->minorversion);
APM_DPRINT("apm: Slow Idling CPU %s\n", is_enabled(sc->slow_idle_cpu));
/* enable power management */
if (sc->disabled) {
if (apm_enable_disable_pm(1)) {
APM_DPRINT("apm: *Warning* enable function failed! [%x]\n",
(sc->bios.r.eax >> 8) & 0xff);
}
}
/* engage power managment (APM 1.1 or later) */
if (sc->intversion >= INTVERSION(1, 1) && sc->disengaged) {
if (apm_engage_disengage_pm(1)) {
APM_DPRINT("apm: *Warning* engage function failed err=[%x]",
(sc->bios.r.eax >> 8) & 0xff);
APM_DPRINT(" (Docked or using external power?).\n");
}
}
/* Power the system off using APM */
EVENTHANDLER_REGISTER(shutdown_final, apm_power_off, NULL,
SHUTDOWN_PRI_LAST);
/* Register APM again to pass the correct argument of pm_func. */
power_pm_register(POWER_PM_TYPE_APM, apm_pm_func, sc);
sc->initialized = 1;
sc->suspending = 0;
sc->running = 0;
make_dev(&apm_cdevsw, 0, 0, 5, 0664, "apm");
make_dev(&apm_cdevsw, 8, 0, 5, 0660, "apmctl");
return 0;
}
static int
apmopen(struct cdev *dev, int flag, int fmt, struct thread *td)
{
struct apm_softc *sc = &apm_softc;
int ctl = APMDEV(dev);
if (sc == NULL || sc->initialized == 0)
return (ENXIO);
switch (ctl) {
case APMDEV_CTL:
if (!(flag & FWRITE))
return EINVAL;
if (sc->sc_flags & SCFLAG_OCTL)
return EBUSY;
sc->sc_flags |= SCFLAG_OCTL;
bzero(sc->event_filter, sizeof sc->event_filter);
break;
case APMDEV_NORMAL:
sc->sc_flags |= SCFLAG_ONORMAL;
break;
default:
return ENXIO;
break;
}
return 0;
}
static int
apmclose(struct cdev *dev, int flag, int fmt, struct thread *td)
{
struct apm_softc *sc = &apm_softc;
int ctl = APMDEV(dev);
switch (ctl) {
case APMDEV_CTL:
apm_lastreq_rejected();
sc->sc_flags &= ~SCFLAG_OCTL;
bzero(sc->event_filter, sizeof sc->event_filter);
break;
case APMDEV_NORMAL:
sc->sc_flags &= ~SCFLAG_ONORMAL;
break;
}
if ((sc->sc_flags & SCFLAG_OPEN) == 0) {
sc->event_count = 0;
sc->event_ptr = 0;
}
return 0;
}
static int
apmioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
{
struct apm_softc *sc = &apm_softc;
struct apm_bios_arg *args;
int error = 0;
int ret;
int newstate;
if (sc == NULL || sc->initialized == 0)
return (ENXIO);
APM_DPRINT("APM ioctl: cmd = 0x%lx\n", cmd);
switch (cmd) {
case APMIO_SUSPEND:
if (!(flag & FWRITE))
return (EPERM);
if (sc->active)
apm_suspend(PMST_SUSPEND);
else
error = EINVAL;
break;
case APMIO_STANDBY:
if (!(flag & FWRITE))
return (EPERM);
if (sc->active)
apm_suspend(PMST_STANDBY);
else
error = EINVAL;
break;
case APMIO_GETINFO_OLD:
{
struct apm_info info;
apm_info_old_t aiop;
if (apm_get_info(&info))
error = ENXIO;
aiop = (apm_info_old_t)addr;
aiop->ai_major = info.ai_major;
aiop->ai_minor = info.ai_minor;
aiop->ai_acline = info.ai_acline;
aiop->ai_batt_stat = info.ai_batt_stat;
aiop->ai_batt_life = info.ai_batt_life;
aiop->ai_status = info.ai_status;
}
break;
case APMIO_GETINFO:
if (apm_get_info((apm_info_t)addr))
error = ENXIO;
break;
case APMIO_GETPWSTATUS:
if (apm_get_pwstatus((apm_pwstatus_t)addr))
error = ENXIO;
break;
case APMIO_ENABLE:
if (!(flag & FWRITE))
return (EPERM);
apm_event_enable();
break;
case APMIO_DISABLE:
if (!(flag & FWRITE))
return (EPERM);
apm_event_disable();
break;
case APMIO_HALTCPU:
if (!(flag & FWRITE))
return (EPERM);
apm_halt_cpu();
break;
case APMIO_NOTHALTCPU:
if (!(flag & FWRITE))
return (EPERM);
apm_not_halt_cpu();
break;
case APMIO_DISPLAY:
if (!(flag & FWRITE))
return (EPERM);
newstate = *(int *)addr;
if (apm_display(newstate))
error = ENXIO;
break;
case APMIO_BIOS:
if (!(flag & FWRITE))
return (EPERM);
/* XXX compatibility with the old interface */
args = (struct apm_bios_arg *)addr;
sc->bios.r.eax = args->eax;
sc->bios.r.ebx = args->ebx;
sc->bios.r.ecx = args->ecx;
sc->bios.r.edx = args->edx;
sc->bios.r.esi = args->esi;
sc->bios.r.edi = args->edi;
if ((ret = apm_bioscall())) {
/*
* Return code 1 means bios call was unsuccessful.
* Error code is stored in %ah.
* Return code -1 means bios call was unsupported
* in the APM BIOS version.
*/
if (ret == -1) {
error = EINVAL;
}
} else {
/*
* Return code 0 means bios call was successful.
* We need only %al and can discard %ah.
*/
sc->bios.r.eax &= 0xff;
}
args->eax = sc->bios.r.eax;
args->ebx = sc->bios.r.ebx;
args->ecx = sc->bios.r.ecx;
args->edx = sc->bios.r.edx;
args->esi = sc->bios.r.esi;
args->edi = sc->bios.r.edi;
break;
default:
error = EINVAL;
break;
}
/* for /dev/apmctl */
if (APMDEV(dev) == APMDEV_CTL) {
struct apm_event_info *evp;
int i;
error = 0;
switch (cmd) {
case APMIO_NEXTEVENT:
if (!sc->event_count) {
error = EAGAIN;
} else {
evp = (struct apm_event_info *)addr;
i = sc->event_ptr + APM_NEVENTS - sc->event_count;
i %= APM_NEVENTS;
*evp = sc->event_list[i];
sc->event_count--;
}
break;
case APMIO_REJECTLASTREQ:
if (apm_lastreq_rejected()) {
error = EINVAL;
}
break;
default:
error = EINVAL;
break;
}
}
return error;
}
static int
apmwrite(struct cdev *dev, struct uio *uio, int ioflag)
{
struct apm_softc *sc = &apm_softc;
u_int event_type;
int error;
u_char enabled;
if (APMDEV(dev) != APMDEV_CTL)
return(ENODEV);
if (uio->uio_resid != sizeof(u_int))
return(E2BIG);
if ((error = uiomove((caddr_t)&event_type, sizeof(u_int), uio)))
return(error);
if (event_type < 0 || event_type >= APM_NPMEV)
return(EINVAL);
if (sc->event_filter[event_type] == 0) {
enabled = 1;
} else {
enabled = 0;
}
sc->event_filter[event_type] = enabled;
APM_DPRINT("apmwrite: event 0x%x %s\n", event_type, is_enabled(enabled));
return uio->uio_resid;
}
static int
apmpoll(struct cdev *dev, int events, struct thread *td)
{
struct apm_softc *sc = &apm_softc;
int revents = 0;
if (events & (POLLIN | POLLRDNORM)) {
if (sc->event_count) {
revents |= events & (POLLIN | POLLRDNORM);
} else {
selrecord(td, &sc->sc_rsel);
}
}
return (revents);
}
static device_method_t apm_methods[] = {
/* Device interface */
DEVMETHOD(device_identify, apm_identify),
DEVMETHOD(device_probe, apm_probe),
DEVMETHOD(device_attach, apm_attach),
{ 0, 0 }
};
static driver_t apm_driver = {
"apm",
apm_methods,
1, /* no softc (XXX) */
};
static devclass_t apm_devclass;
DRIVER_MODULE(apm, legacy, apm_driver, apm_devclass, apm_modevent, 0);
MODULE_VERSION(apm, 1);
static int
apm_pm_func(u_long cmd, void *arg, ...)
{
int state, apm_state;
int error;
va_list ap;
error = 0;
switch (cmd) {
case POWER_CMD_SUSPEND:
va_start(ap, arg);
state = va_arg(ap, int);
va_end(ap);
switch (state) {
case POWER_SLEEP_STATE_STANDBY:
apm_state = PMST_STANDBY;
break;
case POWER_SLEEP_STATE_SUSPEND:
case POWER_SLEEP_STATE_HIBERNATE:
apm_state = PMST_SUSPEND;
break;
default:
error = EINVAL;
goto out;
}
apm_suspend(apm_state);
break;
default:
error = EINVAL;
goto out;
}
out:
return (error);
}
static void
apm_pm_register(void *arg)
{
if (!resource_disabled("apm", 0))
power_pm_register(POWER_PM_TYPE_APM, apm_pm_func, NULL);
}
SYSINIT(power, SI_SUB_KLD, SI_ORDER_ANY, apm_pm_register, 0);