Adrian Chadd 2f760a0455 Add a new 900MHz GSM regulatory SKU for the Xagyl Communications XC900M. ... The XC900M acts as a Ubiquiti XR9 (and I _think_ SR9) by default; it uses the same 900MHz<->2.4GHz downconverter mapping. However it has an alternative frequency mapping which squeezes in a couple more half/quarter rate channels. Since the default HAL doesn't support fractional tuning (sub-1MHz) in 2.4GHz mode on the AR5413/AR5414, they implement it using a jumper. Datasheet: http://www.xagyl.com/download/XC900M_Datasheet.pdf Thankyou to Xagyl Communications for the XC900M NICs and Edgar Martinez for organising the donation. Tested: * XC900M <-> XC900M * Ubiquiti XR9 <-> XC900M TODO: * Test against SR9 and GZ901 if possible (the IEEE channel<->frequency mapping may not match up, thanks to the slightly different channels involved)		2012-12-07 06:34:46 +00:00
..
_ieee80211.h	Add a check for dynamic OFDM/CCK channel types.	2012-07-01 04:25:49 +00:00
ieee80211_acl.c
ieee80211_action.c	Added Self-protected action category (including MPM).	2012-05-01 15:35:10 +00:00
ieee80211_action.h
ieee80211_adhoc.c	Migrate the power-save functions to be overridable VAP methods.	2012-10-02 17:45:19 +00:00
ieee80211_adhoc.h
ieee80211_ageq.c
ieee80211_ageq.h
ieee80211_alq.c	Re-commit this - store the alq payload in network order.	2012-03-21 03:19:50 +00:00
ieee80211_alq.h	.. revert out a local change that I hadn't yet completely finished fleshing	2012-03-18 21:54:59 +00:00
ieee80211_amrr.c
ieee80211_amrr.h
ieee80211_crypto_ccmp.c
ieee80211_crypto_none.c
ieee80211_crypto_tkip.c
ieee80211_crypto_wep.c
ieee80211_crypto.c
ieee80211_crypto.h
ieee80211_ddb.c	Implemented so that Mesh forwarding information lifetime is dynamic.	2012-05-01 15:47:30 +00:00
ieee80211_dfs.c	Add a DFS debugging mode which is useful when doing automated DFS	2012-01-31 00:03:49 +00:00
ieee80211_dfs.h	Add a DFS debugging mode which is useful when doing automated DFS	2012-01-31 00:03:49 +00:00
ieee80211_freebsd.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-05 08:04:20 +00:00
ieee80211_freebsd.h	Add a primitive to check if a lock is not owned.	2012-11-26 00:06:55 +00:00
ieee80211_hostap.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-05 08:04:20 +00:00
ieee80211_hostap.h	Migrate the power-save functions to be overridable VAP methods.	2012-10-02 17:45:19 +00:00
ieee80211_ht.c	Add some further BAR TX debugging; it was useful when figuring out	2012-10-28 04:18:49 +00:00
ieee80211_ht.h	Migrate the net80211 TX aggregation state to be from per-AC to per-TID.	2012-04-15 20:29:39 +00:00
ieee80211_hwmp.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-05 08:04:20 +00:00
ieee80211_input.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-05 08:04:20 +00:00
ieee80211_input.h
ieee80211_ioctl.c	Add the ability to kick an existing mesh node without waiting for it	2012-01-11 17:10:27 +00:00
ieee80211_ioctl.h	PREQ discovery update.	2012-05-01 16:16:20 +00:00
ieee80211_mesh.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-05 08:04:20 +00:00
ieee80211_mesh.h	PREQ discovery update.	2012-05-01 16:16:20 +00:00
ieee80211_monitor.c
ieee80211_monitor.h
ieee80211_node.c	Fix a crash bug introduced in the iterate node work recently done.	2012-09-16 22:45:00 +00:00
ieee80211_node.h	Don't call the node iteration function inside the node table / node	2012-08-15 20:01:28 +00:00
ieee80211_output.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-05 08:04:20 +00:00
ieee80211_phy.c
ieee80211_phy.h
ieee80211_power.c	Migrate the power-save functions to be overridable VAP methods.	2012-10-02 17:45:19 +00:00
ieee80211_power.h	Migrate the power-save functions to be overridable VAP methods.	2012-10-02 17:45:19 +00:00
ieee80211_proto.c	Create a new task to handle 802.11n channel width changes.	2012-03-25 03:11:57 +00:00
ieee80211_proto.h
ieee80211_radiotap.c	Extend the radiotap code to be aware of the size of any extra vendor	2012-06-18 02:08:04 +00:00
ieee80211_radiotap.h	Add a radiotap vendor header definition.	2012-02-24 05:33:11 +00:00
ieee80211_ratectl_none.c
ieee80211_ratectl.c
ieee80211_ratectl.h
ieee80211_regdomain.c	Add basic HT channel setup to ieee80211_init_channels(), this will be	2012-04-03 17:48:42 +00:00
ieee80211_regdomain.h	Add a new 900MHz GSM regulatory SKU for the Xagyl Communications XC900M.	2012-12-07 06:34:46 +00:00
ieee80211_rssadapt.c
ieee80211_rssadapt.h
ieee80211_scan_sta.c
ieee80211_scan.c	Migrate the power-save functions to be overridable VAP methods.	2012-10-02 17:45:19 +00:00
ieee80211_scan.h
ieee80211_sta.c	Migrate the power-save functions to be overridable VAP methods.	2012-10-02 17:45:19 +00:00
ieee80211_sta.h
ieee80211_superg.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-05 08:04:20 +00:00
ieee80211_superg.h
ieee80211_tdma.c	Fix the situation where net80211 is built with IEEE80211_SUPPORT_TDMA but a module	2012-01-15 19:45:23 +00:00
ieee80211_tdma.h
ieee80211_var.h	Migrate the power-save functions to be overridable VAP methods.	2012-10-02 17:45:19 +00:00
ieee80211_wds.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-05 08:04:20 +00:00
ieee80211_wds.h
ieee80211_xauth.c
ieee80211.c	Fix up some initial issues with creation and deletion of hotplugged	2012-10-26 16:56:55 +00:00
ieee80211.h	Fix an incorrect comment.	2012-08-08 17:16:06 +00:00