8e015fd886
I/O clock. Thankfully, the simple executive provies a way to querry the proper clock that works on all models. Move to asking for the SCLK via this interface. This gets the serial console working after we start init and open the console and set the divisor (which turned the output from good to bad). I can login on the console now.
813 lines
20 KiB
C
813 lines
20 KiB
C
/*-
|
|
* Copyright (c) 2003 Marcel Moolenaar
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* uart_dev_oct16550.c
|
|
*
|
|
* Derived from uart_dev_ns8250.c
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*
|
|
*/
|
|
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/conf.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/pcpu.h>
|
|
|
|
#include <dev/uart/uart.h>
|
|
#include <dev/uart/uart_cpu.h>
|
|
#include <dev/uart/uart_bus.h>
|
|
|
|
#include <dev/ic/ns16550.h>
|
|
|
|
#include <mips/cavium/octeon_pcmap_regs.h>
|
|
|
|
#include <contrib/octeon-sdk/cvmx.h>
|
|
|
|
#include "uart_if.h"
|
|
|
|
/*
|
|
* Clear pending interrupts. THRE is cleared by reading IIR. Data
|
|
* that may have been received gets lost here.
|
|
*/
|
|
static void
|
|
oct16550_clrint (struct uart_bas *bas)
|
|
{
|
|
uint8_t iir;
|
|
|
|
iir = uart_getreg(bas, REG_IIR);
|
|
while ((iir & IIR_NOPEND) == 0) {
|
|
iir &= IIR_IMASK;
|
|
if (iir == IIR_RLS)
|
|
(void)uart_getreg(bas, REG_LSR);
|
|
else if (iir == IIR_RXRDY || iir == IIR_RXTOUT)
|
|
(void)uart_getreg(bas, REG_DATA);
|
|
else if (iir == IIR_MLSC)
|
|
(void)uart_getreg(bas, REG_MSR);
|
|
else if (iir == IIR_BUSY)
|
|
(void) uart_getreg(bas, REG_USR);
|
|
uart_barrier(bas);
|
|
iir = uart_getreg(bas, REG_IIR);
|
|
}
|
|
}
|
|
|
|
static int delay_changed = 1;
|
|
|
|
static int
|
|
oct16550_delay (struct uart_bas *bas)
|
|
{
|
|
int divisor;
|
|
u_char lcr;
|
|
static int delay = 0;
|
|
|
|
if (!delay_changed) return delay;
|
|
delay_changed = 0;
|
|
lcr = uart_getreg(bas, REG_LCR);
|
|
uart_setreg(bas, REG_LCR, lcr | LCR_DLAB);
|
|
uart_barrier(bas);
|
|
divisor = uart_getreg(bas, REG_DLL) | (uart_getreg(bas, REG_DLH) << 8);
|
|
uart_barrier(bas);
|
|
uart_setreg(bas, REG_LCR, lcr);
|
|
uart_barrier(bas);
|
|
|
|
if(!bas->rclk)
|
|
return 10; /* return an approx delay value */
|
|
|
|
/* 1/10th the time to transmit 1 character (estimate). */
|
|
if (divisor <= 134)
|
|
return (16000000 * divisor / bas->rclk);
|
|
return (16000 * divisor / (bas->rclk / 1000));
|
|
|
|
}
|
|
|
|
static int
|
|
oct16550_divisor (int rclk, int baudrate)
|
|
{
|
|
int actual_baud, divisor;
|
|
int error;
|
|
|
|
if (baudrate == 0)
|
|
return (0);
|
|
|
|
divisor = (rclk / (baudrate << 3) + 1) >> 1;
|
|
if (divisor == 0 || divisor >= 65536)
|
|
return (0);
|
|
actual_baud = rclk / (divisor << 4);
|
|
|
|
/* 10 times error in percent: */
|
|
error = ((actual_baud - baudrate) * 2000 / baudrate + 1) >> 1;
|
|
|
|
/* 3.0% maximum error tolerance: */
|
|
if (error < -30 || error > 30)
|
|
return (0);
|
|
|
|
return (divisor);
|
|
}
|
|
|
|
static int
|
|
oct16550_drain (struct uart_bas *bas, int what)
|
|
{
|
|
int delay, limit;
|
|
|
|
delay = oct16550_delay(bas);
|
|
|
|
if (what & UART_DRAIN_TRANSMITTER) {
|
|
/*
|
|
* Pick an arbitrary high limit to avoid getting stuck in
|
|
* an infinite loop when the hardware is broken. Make the
|
|
* limit high enough to handle large FIFOs.
|
|
*/
|
|
limit = 10*10*10*1024;
|
|
while ((uart_getreg(bas, REG_LSR) & LSR_TEMT) == 0 && --limit)
|
|
DELAY(delay);
|
|
if (limit == 0) {
|
|
/* printf("oct16550: transmitter appears stuck... "); */
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
if (what & UART_DRAIN_RECEIVER) {
|
|
/*
|
|
* Pick an arbitrary high limit to avoid getting stuck in
|
|
* an infinite loop when the hardware is broken. Make the
|
|
* limit high enough to handle large FIFOs and integrated
|
|
* UARTs. The HP rx2600 for example has 3 UARTs on the
|
|
* management board that tend to get a lot of data send
|
|
* to it when the UART is first activated.
|
|
*/
|
|
limit=10*4096;
|
|
while ((uart_getreg(bas, REG_LSR) & LSR_RXRDY) && --limit) {
|
|
(void)uart_getreg(bas, REG_DATA);
|
|
uart_barrier(bas);
|
|
DELAY(delay << 2);
|
|
}
|
|
if (limit == 0) {
|
|
/* printf("oct16550: receiver appears broken... "); */
|
|
return (EIO);
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* We can only flush UARTs with FIFOs. UARTs without FIFOs should be
|
|
* drained. WARNING: this function clobbers the FIFO setting!
|
|
*/
|
|
static void
|
|
oct16550_flush (struct uart_bas *bas, int what)
|
|
{
|
|
uint8_t fcr;
|
|
|
|
fcr = FCR_ENABLE;
|
|
if (what & UART_FLUSH_TRANSMITTER)
|
|
fcr |= FCR_XMT_RST;
|
|
if (what & UART_FLUSH_RECEIVER)
|
|
fcr |= FCR_RCV_RST;
|
|
uart_setreg(bas, REG_FCR, fcr);
|
|
uart_barrier(bas);
|
|
}
|
|
|
|
static int
|
|
oct16550_param (struct uart_bas *bas, int baudrate, int databits, int stopbits,
|
|
int parity)
|
|
{
|
|
int divisor;
|
|
uint8_t lcr;
|
|
|
|
lcr = 0;
|
|
if (databits >= 8)
|
|
lcr |= LCR_8BITS;
|
|
else if (databits == 7)
|
|
lcr |= LCR_7BITS;
|
|
else if (databits == 6)
|
|
lcr |= LCR_6BITS;
|
|
else
|
|
lcr |= LCR_5BITS;
|
|
if (stopbits > 1)
|
|
lcr |= LCR_STOPB;
|
|
lcr |= parity << 3;
|
|
|
|
/* Set baudrate. */
|
|
if (baudrate > 0) {
|
|
divisor = oct16550_divisor(bas->rclk, baudrate);
|
|
if (divisor == 0)
|
|
return (EINVAL);
|
|
uart_setreg(bas, REG_LCR, lcr | LCR_DLAB);
|
|
uart_barrier(bas);
|
|
uart_setreg(bas, REG_DLL, divisor & 0xff);
|
|
uart_setreg(bas, REG_DLH, (divisor >> 8) & 0xff);
|
|
uart_barrier(bas);
|
|
delay_changed = 1;
|
|
}
|
|
|
|
/* Set LCR and clear DLAB. */
|
|
uart_setreg(bas, REG_LCR, lcr);
|
|
uart_barrier(bas);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Low-level UART interface.
|
|
*/
|
|
static int oct16550_probe(struct uart_bas *bas);
|
|
static void oct16550_init(struct uart_bas *bas, int, int, int, int);
|
|
static void oct16550_term(struct uart_bas *bas);
|
|
static void oct16550_putc(struct uart_bas *bas, int);
|
|
static int oct16550_rxready(struct uart_bas *bas);
|
|
static int oct16550_getc(struct uart_bas *bas, struct mtx *);
|
|
|
|
struct uart_ops uart_oct16550_ops = {
|
|
.probe = oct16550_probe,
|
|
.init = oct16550_init,
|
|
.term = oct16550_term,
|
|
.putc = oct16550_putc,
|
|
.rxready = oct16550_rxready,
|
|
.getc = oct16550_getc,
|
|
};
|
|
|
|
static int
|
|
oct16550_probe (struct uart_bas *bas)
|
|
{
|
|
u_char val;
|
|
|
|
/* Check known 0 bits that don't depend on DLAB. */
|
|
val = uart_getreg(bas, REG_IIR);
|
|
if (val & 0x30)
|
|
return (ENXIO);
|
|
val = uart_getreg(bas, REG_MCR);
|
|
if (val & 0xc0)
|
|
return (ENXIO);
|
|
val = uart_getreg(bas, REG_USR);
|
|
if (val & 0xe0)
|
|
return (ENXIO);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
oct16550_init (struct uart_bas *bas, int baudrate, int databits, int stopbits,
|
|
int parity)
|
|
{
|
|
u_char ier;
|
|
|
|
oct16550_param(bas, baudrate, databits, stopbits, parity);
|
|
|
|
/* Disable all interrupt sources. */
|
|
ier = uart_getreg(bas, REG_IER) & 0x0;
|
|
uart_setreg(bas, REG_IER, ier);
|
|
uart_barrier(bas);
|
|
|
|
/* Disable the FIFO (if present). */
|
|
// uart_setreg(bas, REG_FCR, 0);
|
|
uart_barrier(bas);
|
|
|
|
/* Set RTS & DTR. */
|
|
uart_setreg(bas, REG_MCR, MCR_RTS | MCR_DTR);
|
|
uart_barrier(bas);
|
|
|
|
oct16550_clrint(bas);
|
|
}
|
|
|
|
static void
|
|
oct16550_term (struct uart_bas *bas)
|
|
{
|
|
|
|
/* Clear RTS & DTR. */
|
|
uart_setreg(bas, REG_MCR, 0);
|
|
uart_barrier(bas);
|
|
}
|
|
|
|
static inline void oct16550_wait_txhr_empty (struct uart_bas *bas, int limit, int delay)
|
|
{
|
|
while (((uart_getreg(bas, REG_LSR) & LSR_THRE) == 0) &&
|
|
((uart_getreg(bas, REG_USR) & USR_TXFIFO_NOTFULL) == 0))
|
|
DELAY(delay);
|
|
}
|
|
|
|
static void
|
|
oct16550_putc (struct uart_bas *bas, int c)
|
|
{
|
|
int delay;
|
|
|
|
/* 1/10th the time to transmit 1 character (estimate). */
|
|
delay = oct16550_delay(bas);
|
|
oct16550_wait_txhr_empty(bas, 100, delay);
|
|
uart_setreg(bas, REG_DATA, c);
|
|
uart_barrier(bas);
|
|
oct16550_wait_txhr_empty(bas, 100, delay);
|
|
}
|
|
|
|
static int
|
|
oct16550_rxready (struct uart_bas *bas)
|
|
{
|
|
|
|
return ((uart_getreg(bas, REG_LSR) & LSR_RXRDY) != 0 ? 1 : 0);
|
|
}
|
|
|
|
static int
|
|
oct16550_getc (struct uart_bas *bas, struct mtx *hwmtx)
|
|
{
|
|
int c, delay;
|
|
|
|
uart_lock(hwmtx);
|
|
|
|
/* 1/10th the time to transmit 1 character (estimate). */
|
|
delay = oct16550_delay(bas);
|
|
|
|
while ((uart_getreg(bas, REG_LSR) & LSR_RXRDY) == 0) {
|
|
uart_unlock(hwmtx);
|
|
DELAY(delay);
|
|
uart_lock(hwmtx);
|
|
}
|
|
|
|
c = uart_getreg(bas, REG_DATA);
|
|
|
|
uart_unlock(hwmtx);
|
|
|
|
return (c);
|
|
}
|
|
|
|
/*
|
|
* High-level UART interface.
|
|
*/
|
|
struct oct16550_softc {
|
|
struct uart_softc base;
|
|
uint8_t fcr;
|
|
uint8_t ier;
|
|
uint8_t mcr;
|
|
};
|
|
|
|
static int oct16550_bus_attach(struct uart_softc *);
|
|
static int oct16550_bus_detach(struct uart_softc *);
|
|
static int oct16550_bus_flush(struct uart_softc *, int);
|
|
static int oct16550_bus_getsig(struct uart_softc *);
|
|
static int oct16550_bus_ioctl(struct uart_softc *, int, intptr_t);
|
|
static int oct16550_bus_ipend(struct uart_softc *);
|
|
static int oct16550_bus_param(struct uart_softc *, int, int, int, int);
|
|
static int oct16550_bus_probe(struct uart_softc *);
|
|
static int oct16550_bus_receive(struct uart_softc *);
|
|
static int oct16550_bus_setsig(struct uart_softc *, int);
|
|
static int oct16550_bus_transmit(struct uart_softc *);
|
|
|
|
static kobj_method_t oct16550_methods[] = {
|
|
KOBJMETHOD(uart_attach, oct16550_bus_attach),
|
|
KOBJMETHOD(uart_detach, oct16550_bus_detach),
|
|
KOBJMETHOD(uart_flush, oct16550_bus_flush),
|
|
KOBJMETHOD(uart_getsig, oct16550_bus_getsig),
|
|
KOBJMETHOD(uart_ioctl, oct16550_bus_ioctl),
|
|
KOBJMETHOD(uart_ipend, oct16550_bus_ipend),
|
|
KOBJMETHOD(uart_param, oct16550_bus_param),
|
|
KOBJMETHOD(uart_probe, oct16550_bus_probe),
|
|
KOBJMETHOD(uart_receive, oct16550_bus_receive),
|
|
KOBJMETHOD(uart_setsig, oct16550_bus_setsig),
|
|
KOBJMETHOD(uart_transmit, oct16550_bus_transmit),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
struct uart_class uart_oct16550_class = {
|
|
"oct16550 class",
|
|
oct16550_methods,
|
|
sizeof(struct oct16550_softc),
|
|
.uc_ops = &uart_oct16550_ops,
|
|
.uc_range = 8 << 3,
|
|
.uc_rclk = 0
|
|
};
|
|
|
|
#define SIGCHG(c, i, s, d) \
|
|
if (c) { \
|
|
i |= (i & s) ? s : s | d; \
|
|
} else { \
|
|
i = (i & s) ? (i & ~s) | d : i; \
|
|
}
|
|
|
|
static int
|
|
oct16550_bus_attach (struct uart_softc *sc)
|
|
{
|
|
struct oct16550_softc *oct16550 = (struct oct16550_softc*)sc;
|
|
struct uart_bas *bas;
|
|
int unit;
|
|
|
|
unit = device_get_unit(sc->sc_dev);
|
|
bas = &sc->sc_bas;
|
|
|
|
oct16550_drain(bas, UART_DRAIN_TRANSMITTER);
|
|
oct16550->mcr = uart_getreg(bas, REG_MCR);
|
|
oct16550->fcr = FCR_ENABLE | FCR_RX_HIGH;
|
|
uart_setreg(bas, REG_FCR, oct16550->fcr);
|
|
uart_barrier(bas);
|
|
oct16550_bus_flush(sc, UART_FLUSH_RECEIVER|UART_FLUSH_TRANSMITTER);
|
|
|
|
if (oct16550->mcr & MCR_DTR)
|
|
sc->sc_hwsig |= SER_DTR;
|
|
if (oct16550->mcr & MCR_RTS)
|
|
sc->sc_hwsig |= SER_RTS;
|
|
oct16550_bus_getsig(sc);
|
|
|
|
oct16550_clrint(bas);
|
|
oct16550->ier = uart_getreg(bas, REG_IER) & 0xf0;
|
|
oct16550->ier |= IER_EMSC | IER_ERLS | IER_ERXRDY;
|
|
uart_setreg(bas, REG_IER, oct16550->ier);
|
|
uart_barrier(bas);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
oct16550_bus_detach (struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas;
|
|
u_char ier;
|
|
|
|
bas = &sc->sc_bas;
|
|
ier = uart_getreg(bas, REG_IER) & 0xf0;
|
|
uart_setreg(bas, REG_IER, ier);
|
|
uart_barrier(bas);
|
|
oct16550_clrint(bas);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
oct16550_bus_flush (struct uart_softc *sc, int what)
|
|
{
|
|
struct oct16550_softc *oct16550 = (struct oct16550_softc*)sc;
|
|
struct uart_bas *bas;
|
|
int error;
|
|
|
|
bas = &sc->sc_bas;
|
|
uart_lock(sc->sc_hwmtx);
|
|
if (sc->sc_rxfifosz > 1) {
|
|
oct16550_flush(bas, what);
|
|
uart_setreg(bas, REG_FCR, oct16550->fcr);
|
|
uart_barrier(bas);
|
|
error = 0;
|
|
} else
|
|
error = oct16550_drain(bas, what);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
oct16550_bus_getsig (struct uart_softc *sc)
|
|
{
|
|
uint32_t new, old, sig;
|
|
uint8_t msr;
|
|
|
|
do {
|
|
old = sc->sc_hwsig;
|
|
sig = old;
|
|
uart_lock(sc->sc_hwmtx);
|
|
msr = uart_getreg(&sc->sc_bas, REG_MSR);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
SIGCHG(msr & MSR_DSR, sig, SER_DSR, SER_DDSR);
|
|
SIGCHG(msr & MSR_CTS, sig, SER_CTS, SER_DCTS);
|
|
SIGCHG(msr & MSR_DCD, sig, SER_DCD, SER_DDCD);
|
|
SIGCHG(msr & MSR_RI, sig, SER_RI, SER_DRI);
|
|
new = sig & ~SER_MASK_DELTA;
|
|
} while (!atomic_cmpset_32(&sc->sc_hwsig, old, new));
|
|
return (sig);
|
|
}
|
|
|
|
static int
|
|
oct16550_bus_ioctl (struct uart_softc *sc, int request, intptr_t data)
|
|
{
|
|
struct uart_bas *bas;
|
|
int baudrate, divisor, error;
|
|
uint8_t efr, lcr;
|
|
|
|
bas = &sc->sc_bas;
|
|
error = 0;
|
|
uart_lock(sc->sc_hwmtx);
|
|
switch (request) {
|
|
case UART_IOCTL_BREAK:
|
|
lcr = uart_getreg(bas, REG_LCR);
|
|
if (data)
|
|
lcr |= LCR_SBREAK;
|
|
else
|
|
lcr &= ~LCR_SBREAK;
|
|
uart_setreg(bas, REG_LCR, lcr);
|
|
uart_barrier(bas);
|
|
break;
|
|
case UART_IOCTL_IFLOW:
|
|
lcr = uart_getreg(bas, REG_LCR);
|
|
uart_barrier(bas);
|
|
uart_setreg(bas, REG_LCR, 0xbf);
|
|
uart_barrier(bas);
|
|
efr = uart_getreg(bas, REG_EFR);
|
|
if (data)
|
|
efr |= EFR_RTS;
|
|
else
|
|
efr &= ~EFR_RTS;
|
|
uart_setreg(bas, REG_EFR, efr);
|
|
uart_barrier(bas);
|
|
uart_setreg(bas, REG_LCR, lcr);
|
|
uart_barrier(bas);
|
|
break;
|
|
case UART_IOCTL_OFLOW:
|
|
lcr = uart_getreg(bas, REG_LCR);
|
|
uart_barrier(bas);
|
|
uart_setreg(bas, REG_LCR, 0xbf);
|
|
uart_barrier(bas);
|
|
efr = uart_getreg(bas, REG_EFR);
|
|
if (data)
|
|
efr |= EFR_CTS;
|
|
else
|
|
efr &= ~EFR_CTS;
|
|
uart_setreg(bas, REG_EFR, efr);
|
|
uart_barrier(bas);
|
|
uart_setreg(bas, REG_LCR, lcr);
|
|
uart_barrier(bas);
|
|
break;
|
|
case UART_IOCTL_BAUD:
|
|
lcr = uart_getreg(bas, REG_LCR);
|
|
uart_setreg(bas, REG_LCR, lcr | LCR_DLAB);
|
|
uart_barrier(bas);
|
|
divisor = uart_getreg(bas, REG_DLL) |
|
|
(uart_getreg(bas, REG_DLH) << 8);
|
|
uart_barrier(bas);
|
|
uart_setreg(bas, REG_LCR, lcr);
|
|
uart_barrier(bas);
|
|
baudrate = (divisor > 0) ? bas->rclk / divisor / 16 : 0;
|
|
delay_changed = 1;
|
|
if (baudrate > 0)
|
|
*(int*)data = baudrate;
|
|
else
|
|
error = ENXIO;
|
|
break;
|
|
default:
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
uart_unlock(sc->sc_hwmtx);
|
|
return (error);
|
|
}
|
|
|
|
|
|
static int
|
|
oct16550_bus_ipend(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas;
|
|
int ipend = 0;
|
|
uint8_t iir, lsr;
|
|
|
|
bas = &sc->sc_bas;
|
|
uart_lock(sc->sc_hwmtx);
|
|
|
|
iir = uart_getreg(bas, REG_IIR) & IIR_IMASK;
|
|
if (iir != IIR_NOPEND) {
|
|
|
|
if (iir == IIR_RLS) {
|
|
lsr = uart_getreg(bas, REG_LSR);
|
|
if (lsr & LSR_OE)
|
|
ipend |= SER_INT_OVERRUN;
|
|
if (lsr & LSR_BI)
|
|
ipend |= SER_INT_BREAK;
|
|
if (lsr & LSR_RXRDY)
|
|
ipend |= SER_INT_RXREADY;
|
|
|
|
} else if (iir == IIR_RXRDY) {
|
|
ipend |= SER_INT_RXREADY;
|
|
|
|
} else if (iir == IIR_RXTOUT) {
|
|
ipend |= SER_INT_RXREADY;
|
|
|
|
} else if (iir == IIR_TXRDY) {
|
|
ipend |= SER_INT_TXIDLE;
|
|
|
|
} else if (iir == IIR_MLSC) {
|
|
ipend |= SER_INT_SIGCHG;
|
|
|
|
} else if (iir == IIR_BUSY) {
|
|
(void) uart_getreg(bas, REG_USR);
|
|
}
|
|
}
|
|
uart_unlock(sc->sc_hwmtx);
|
|
|
|
return (ipend);
|
|
}
|
|
|
|
static int
|
|
oct16550_bus_param (struct uart_softc *sc, int baudrate, int databits,
|
|
int stopbits, int parity)
|
|
{
|
|
struct uart_bas *bas;
|
|
int error;
|
|
|
|
bas = &sc->sc_bas;
|
|
uart_lock(sc->sc_hwmtx);
|
|
error = oct16550_param(bas, baudrate, databits, stopbits, parity);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
oct16550_bus_probe (struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas;
|
|
int error;
|
|
|
|
bas = &sc->sc_bas;
|
|
bas->rclk = uart_oct16550_class.uc_rclk = cvmx_clock_get_rate(CVMX_CLOCK_SCLK);
|
|
|
|
error = oct16550_probe(bas);
|
|
if (error) {
|
|
return (error);
|
|
}
|
|
|
|
uart_setreg(bas, REG_MCR, (MCR_DTR | MCR_RTS));
|
|
|
|
/*
|
|
* Enable FIFOs. And check that the UART has them. If not, we're
|
|
* done. Since this is the first time we enable the FIFOs, we reset
|
|
* them.
|
|
*/
|
|
oct16550_drain(bas, UART_DRAIN_TRANSMITTER);
|
|
#define ENABLE_OCTEON_FIFO 1
|
|
#ifdef ENABLE_OCTEON_FIFO
|
|
uart_setreg(bas, REG_FCR, FCR_ENABLE | FCR_XMT_RST | FCR_RCV_RST);
|
|
#endif
|
|
uart_barrier(bas);
|
|
|
|
oct16550_flush(bas, UART_FLUSH_RECEIVER|UART_FLUSH_TRANSMITTER);
|
|
|
|
if (device_get_unit(sc->sc_dev)) {
|
|
device_set_desc(sc->sc_dev, "Octeon-16550 channel 1");
|
|
} else {
|
|
device_set_desc(sc->sc_dev, "Octeon-16550 channel 0");
|
|
}
|
|
#ifdef ENABLE_OCTEON_FIFO
|
|
sc->sc_rxfifosz = 64;
|
|
sc->sc_txfifosz = 64;
|
|
#else
|
|
sc->sc_rxfifosz = 1;
|
|
sc->sc_txfifosz = 1;
|
|
#endif
|
|
|
|
|
|
#if 0
|
|
/*
|
|
* XXX there are some issues related to hardware flow control and
|
|
* it's likely that uart(4) is the cause. This basicly needs more
|
|
* investigation, but we avoid using for hardware flow control
|
|
* until then.
|
|
*/
|
|
/* 16650s or higher have automatic flow control. */
|
|
if (sc->sc_rxfifosz > 16) {
|
|
sc->sc_hwiflow = 1;
|
|
sc->sc_hwoflow = 1;
|
|
}
|
|
#endif
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
oct16550_bus_receive (struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas;
|
|
int xc;
|
|
uint8_t lsr;
|
|
|
|
bas = &sc->sc_bas;
|
|
uart_lock(sc->sc_hwmtx);
|
|
lsr = uart_getreg(bas, REG_LSR);
|
|
|
|
while (lsr & LSR_RXRDY) {
|
|
if (uart_rx_full(sc)) {
|
|
sc->sc_rxbuf[sc->sc_rxput] = UART_STAT_OVERRUN;
|
|
break;
|
|
}
|
|
xc = uart_getreg(bas, REG_DATA);
|
|
if (lsr & LSR_FE)
|
|
xc |= UART_STAT_FRAMERR;
|
|
if (lsr & LSR_PE)
|
|
xc |= UART_STAT_PARERR;
|
|
uart_rx_put(sc, xc);
|
|
lsr = uart_getreg(bas, REG_LSR);
|
|
}
|
|
/* Discard everything left in the Rx FIFO. */
|
|
/*
|
|
* First do a dummy read/discard anyway, in case the UART was lying to us.
|
|
* This problem was seen on board, when IIR said RBR, but LSR said no RXRDY
|
|
* Results in a stuck ipend loop.
|
|
*/
|
|
(void)uart_getreg(bas, REG_DATA);
|
|
while (lsr & LSR_RXRDY) {
|
|
(void)uart_getreg(bas, REG_DATA);
|
|
uart_barrier(bas);
|
|
lsr = uart_getreg(bas, REG_LSR);
|
|
}
|
|
uart_unlock(sc->sc_hwmtx);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
oct16550_bus_setsig (struct uart_softc *sc, int sig)
|
|
{
|
|
struct oct16550_softc *oct16550 = (struct oct16550_softc*)sc;
|
|
struct uart_bas *bas;
|
|
uint32_t new, old;
|
|
|
|
bas = &sc->sc_bas;
|
|
do {
|
|
old = sc->sc_hwsig;
|
|
new = old;
|
|
if (sig & SER_DDTR) {
|
|
SIGCHG(sig & SER_DTR, new, SER_DTR,
|
|
SER_DDTR);
|
|
}
|
|
if (sig & SER_DRTS) {
|
|
SIGCHG(sig & SER_RTS, new, SER_RTS,
|
|
SER_DRTS);
|
|
}
|
|
} while (!atomic_cmpset_32(&sc->sc_hwsig, old, new));
|
|
uart_lock(sc->sc_hwmtx);
|
|
oct16550->mcr &= ~(MCR_DTR|MCR_RTS);
|
|
if (new & SER_DTR)
|
|
oct16550->mcr |= MCR_DTR;
|
|
if (new & SER_RTS)
|
|
oct16550->mcr |= MCR_RTS;
|
|
uart_setreg(bas, REG_MCR, oct16550->mcr);
|
|
uart_barrier(bas);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
oct16550_bus_transmit (struct uart_softc *sc)
|
|
{
|
|
struct oct16550_softc *oct16550 = (struct oct16550_softc*)sc;
|
|
struct uart_bas *bas;
|
|
int i;
|
|
|
|
bas = &sc->sc_bas;
|
|
uart_lock(sc->sc_hwmtx);
|
|
#ifdef NO_UART_INTERRUPTS
|
|
for (i = 0; i < sc->sc_txdatasz; i++) {
|
|
oct16550_putc(bas, sc->sc_txbuf[i]);
|
|
}
|
|
#else
|
|
|
|
oct16550_wait_txhr_empty(bas, 100, oct16550_delay(bas));
|
|
uart_setreg(bas, REG_IER, oct16550->ier | IER_ETXRDY);
|
|
uart_barrier(bas);
|
|
|
|
for (i = 0; i < sc->sc_txdatasz; i++) {
|
|
uart_setreg(bas, REG_DATA, sc->sc_txbuf[i]);
|
|
uart_barrier(bas);
|
|
}
|
|
sc->sc_txbusy = 1;
|
|
#endif
|
|
uart_unlock(sc->sc_hwmtx);
|
|
return (0);
|
|
}
|