freebsd-nq/sys/mips/cavium/octeon_ds1337.c
Juli Mallett cea2b8b915 Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive
library:
o) Increase inline unit / large function growth limits for MIPS to accommodate
   the needs of the Simple Executive, which uses a shocking amount of inlining.
o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and
   the Octeon SoC.
o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific
   board numbers, specifically to support the MR320.
o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd,
   which improperly uses an evaluation board's board number and breaks board
   detection at runtime.  This board is sold by Portwell as the CAM-0100.
o) Add support for the RTC available on some Octeon boards.
o) Add support for the Octeon PCI bus.  Note that rman_[sg]et_virtual for IO
   ports can not work unless building for n64.
o) Clean up the CompactFlash driver to use Simple Executive macros and
   structures where possible (it would be advisable to use the Simple Executive
   API to set the PIO mode, too, but that is not done presently.)  Also use
   structures from FreeBSD's ATA layer rather than structures copied from
   Linux.
o) Print available Octeon SoC features on boot.
o) Add support for the Octeon timecounter.
o) Use the Simple Executive's routines rather than local copies for doing reads
   and writes to 64-bit addresses and use its macros for various device
   addresses rather than using local copies.
o) Rename octeon_board_real to octeon_is_simulation to reduce differences with
   Cavium-provided code originally written for Linux.  Also make it use the
   same simplified test that the Simple Executive and Linux both use rather
   than our complex one.
o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus
   to use normal interrupt allocation and setup routines.
o) Use the Simple Executive's bootmem facility to allocate physical memory for
   the kernel, rather than assuming we know which addresses we can steal.
   NB: This may reduce the amount of RAM the kernel reports you as having if
       you are leaving large temporary allocations made by U-Boot allocated
       when starting FreeBSD.
o) Add a port of the Cavium-provided Ethernet driver for Linux.  This changes
   Ethernet interface naming from rgmxN to octeN.  The new driver has vast
   improvements over the old one, both in performance and functionality, but
   does still have some features which have not been ported entirely and there
   may be unimplemented code that can be hit in everyday use.  I will make
   every effort to correct those as they are reported.
o) Support loading the kernel on non-contiguous cores.
o) Add very conservative support for harvesting randomness from the Octeon
   random number device.
o) Turn SMP on by default.
o) Clean up the style of the Octeon kernel configurations a little and make
   them compile with -march=octeon.
o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple
   Executive.
o) Modify the Simple Executive to build on FreeBSD and to build without
   executive-config.h or cvmx-config.h.  In the future we may want to
   revert part of these changes and supply executive-config.h and
   cvmx-config.h and access to the options contained in those files via
   kernel configuration files.
o) Modify the Simple Executive USB routines to support getting and setting
   of the USB PID.
2010-07-20 19:25:11 +00:00

214 lines
5.9 KiB
C

/***********************license start***************
* Copyright (c) 2003-2008 Cavium Networks (support@cavium.com). All rights
* reserved.
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
*
* * Neither the name of Cavium Networks nor the names of
* its contributors may be used to endorse or promote products
* derived from this software without specific prior written
* permission.
*
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
* AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS
* OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH
* RESPECT TO THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY
* REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT
* DEFECTS, AND CAVIUM SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES
* OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR
* PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET
* POSSESSION OR CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT
* OF USE OR PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
*
*
* For any questions regarding licensing please contact marketing@caviumnetworks.com
*
***********************license end**************************************/
/**
* @file
*
* Interface to the EBH-30xx specific devices
*
* <hr>$Revision: 41586 $<hr>
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/timespec.h>
#include <sys/clock.h>
#include <sys/libkern.h>
#include <contrib/octeon-sdk/cvmx.h>
#include <contrib/octeon-sdk/cvmx-cn3010-evb-hs5.h>
#include <contrib/octeon-sdk/cvmx-twsi.h>
#define CT_CHECK(_expr, _msg) \
do { \
if (_expr) { \
cvmx_dprintf("Warning: RTC has invalid %s field\n", (_msg)); \
rc = -1; \
} \
} while(0);
static int validate_ct_struct(struct clocktime *ct)
{
int rc = 0;
if (!ct)
return -1;
CT_CHECK(ct->sec < 0 || ct->sec > 60, "second"); /* + Leap sec */
CT_CHECK(ct->min < 0 || ct->min > 59, "minute");
CT_CHECK(ct->hour < 0 || ct->hour > 23, "hour");
CT_CHECK(ct->day < 1 || ct->day > 31, "day");
CT_CHECK(ct->dow < 0 || ct->dow > 6, "day of week");
CT_CHECK(ct->mon < 0 || ct->mon > 11, "month");
CT_CHECK(ct->year < 0 || ct->year > 200,"year");
return rc;
}
/*
* Board-specifc RTC read
* Time is expressed in seconds from epoch (Jan 1 1970 at 00:00:00 UTC)
* and converted internally to calendar format.
*/
uint32_t cvmx_rtc_ds1337_read(void)
{
int i, retry;
uint8_t reg[8];
uint8_t sec;
struct clocktime ct;
struct timespec ts;
memset(&reg, 0, sizeof(reg));
memset(&ct, 0, sizeof(ct));
for(retry=0; retry<2; retry++)
{
/* Lockless read: detects the infrequent roll-over and retries */
reg[0] = cvmx_twsi_read8(CVMX_RTC_DS1337_ADDR, 0x0);
for(i=1; i<7; i++)
reg[i] = cvmx_twsi_read8_cur_addr(CVMX_RTC_DS1337_ADDR);
sec = cvmx_twsi_read8(CVMX_RTC_DS1337_ADDR, 0x0);
if ((sec & 0xf) == (reg[0] & 0xf))
break; /* Time did not roll-over, value is correct */
}
ct.sec = bcd2bin(reg[0] & 0x7f);
ct.min = bcd2bin(reg[1] & 0x7f);
ct.hour = bcd2bin(reg[2] & 0x3f);
if ((reg[2] & 0x40) && (reg[2] & 0x20)) /* AM/PM format and is PM time */
{
ct.hour = (ct.hour + 12) % 24;
}
ct.dow = (reg[3] & 0x7) - 1; /* Day of week field is 0..6 */
ct.day = bcd2bin(reg[4] & 0x3f);
ct.mon = bcd2bin(reg[5] & 0x1f) - 1; /* Month field is 0..11 */
ct.year = ((reg[5] & 0x80) ? 100 : 0) + bcd2bin(reg[6]);
if (validate_ct_struct(&ct))
cvmx_dprintf("Warning: RTC calendar is not configured properly\n");
if (clock_ct_to_ts(&ct, &ts) != 0) {
cvmx_dprintf("Warning: RTC calendar is not configured properly\n");
return 0;
}
return ts.tv_sec;
}
/*
* Board-specific RTC write
* Time returned is in seconds from epoch (Jan 1 1970 at 00:00:00 UTC)
*/
int cvmx_rtc_ds1337_write(uint32_t time)
{
struct clocktime ct;
struct timespec ts;
int i, rc, retry;
uint8_t reg[8];
uint8_t sec;
ts.tv_sec = time;
ts.tv_nsec = 0;
clock_ts_to_ct(&ts, &ct);
if (validate_ct_struct(&ct))
{
cvmx_dprintf("Error: RTC was passed wrong calendar values, write failed\n");
goto ct_invalid;
}
reg[0] = bin2bcd(ct.sec);
reg[1] = bin2bcd(ct.min);
reg[2] = bin2bcd(ct.hour); /* Force 0..23 format even if using AM/PM */
reg[3] = bin2bcd(ct.dow + 1);
reg[4] = bin2bcd(ct.day);
reg[5] = bin2bcd(ct.mon + 1);
if (ct.year >= 100) /* Set century bit*/
{
reg[5] |= 0x80;
}
reg[6] = bin2bcd(ct.year % 100);
/* Lockless write: detects the infrequent roll-over and retries */
for(retry=0; retry<2; retry++)
{
rc = 0;
for(i=0; i<7; i++)
{
rc |= cvmx_twsi_write8(CVMX_RTC_DS1337_ADDR, i, reg[i]);
}
sec = cvmx_twsi_read8(CVMX_RTC_DS1337_ADDR, 0x0);
if ((sec & 0xf) == (reg[0] & 0xf))
break; /* Time did not roll-over, value is correct */
}
return (rc ? -1 : 0);
ct_invalid:
return -1;
}
#ifdef CVMX_RTC_DEBUG
void cvmx_rtc_ds1337_dump_state(void)
{
int i = 0;
printf("RTC:\n");
printf("%d : %02X ", i, cvmx_twsi_read8(CVMX_RTC_DS1337_ADDR, 0x0));
for(i=1; i<16; i++) {
printf("%02X ", cvmx_twsi_read8_cur_addr(CVMX_RTC_DS1337_ADDR));
}
printf("\n");
}
#endif /* CVMX_RTC_DEBUG */