Adrian Chadd 353d29772b Change the default CABQ time to be 70% of the beacon interval, ...

rather than the whole beacon interval.

The reference driver and Linux ath9k both choose 80% of the
beacon interval and they do it in the driver rather than
the HAL (Ath reference) or ath9k_hw (ath9k.)

This quietens stuck beacon conditions on my AR9220/AR9280
based NICs when a lot of burst broadcast/multicast traffic
is going on. It doesn't seem to annoy the earlier MACs as
much as the AR9280 and later one.

Obtained from:	Linux ath9k, Atheros

2011-09-28 03:05:04 +00:00

..

ah_regdomain

These two are ath_hal regulatory domain updates from the Atheros

2011-07-20 12:46:58 +00:00

ar5210

Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.

2011-09-08 01:23:05 +00:00

ar5211

Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.

2011-09-08 01:23:05 +00:00

ar5212

Change the default CABQ time to be 70% of the beacon interval,

2011-09-28 03:05:04 +00:00

ar5312

Re-introduce a global ath_hal_debug again for now, whilst I figure out what

2011-06-23 06:55:29 +00:00

ar5416

Change the default CABQ time to be 70% of the beacon interval,

2011-09-28 03:05:04 +00:00

ar9001

Break out the PLL setup into (mostly) per-chip methods, rather than

2011-07-21 08:35:10 +00:00

ar9002

Undo this for now. It's "right", but it means everything will rely on

2011-08-03 23:57:38 +00:00

ah_debug.h

Add a new flag - HAL_DEBUG_UNMASKABLE - which always logs a debug message

2011-05-11 13:22:41 +00:00

ah_decode.h

Add some more OS_MARK probes to the RX DMA setup/teardown code path.

2011-04-07 13:14:51 +00:00

ah_desc.h

Add some more phyerr bits.

2011-07-31 03:33:02 +00:00

ah_devid.h

Merlin -> Kiwi

2011-05-26 09:16:09 +00:00

ah_diagcodes.h

Reserve a new diagnostic code for the channel survey code I'll add soon.

2011-03-19 14:37:13 +00:00

ah_eeprom_9287.c

Prepare for embedded use of the AR9285/AR9287.

2011-07-30 13:37:38 +00:00

ah_eeprom_9287.h

Make sure the extended regdomain word is initialised.

2011-06-28 00:01:55 +00:00

ah_eeprom_v1.c

Fix the eeprom set API method to return HAL_STATUS.

2011-05-14 15:12:02 +00:00

ah_eeprom_v1.h

Replace Id keyword with FreeBSD keyword and set the svn props correctly.

2010-03-03 17:32:32 +00:00

ah_eeprom_v3.c

Fix the eeprom set API method to return HAL_STATUS.

2011-05-14 15:12:02 +00:00

ah_eeprom_v3.h

Replace Id keyword with FreeBSD keyword and set the svn props correctly.

2010-03-03 17:32:32 +00:00

ah_eeprom_v4k.c

Remove the EEPROM minor >= 19 check for txgaintype; that's only needed for

2011-08-03 06:51:14 +00:00

ah_eeprom_v4k.h

Bring over a pdadc calibration fix from ath9k - unused power detector

2011-04-22 10:57:46 +00:00

ah_eeprom_v14.c

Introduce the FRAC_5G EEPROM parameter.

2011-07-30 13:45:12 +00:00

ah_eeprom_v14.h

Introduce the FRAC_5G EEPROM parameter.

2011-07-30 13:45:12 +00:00

ah_eeprom.h

Introduce the FRAC_5G EEPROM parameter.

2011-07-30 13:45:12 +00:00

ah_internal.h

Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.

2011-09-08 01:23:05 +00:00

ah_regdomain.c

Bitten again by the optional HALDEBUG compilation.

2011-08-08 18:05:22 +00:00

ah_regdomain.h

Migrate the regulatory database definitions into separate header files

2011-03-10 03:13:56 +00:00

ah_soc.h

Replace Id keyword with FreeBSD keyword and set the svn props correctly.

2010-03-03 17:32:32 +00:00

ah.c

Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.

2011-09-08 01:23:05 +00:00

ah.h

Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.

2011-09-08 01:23:05 +00:00