61 lines
2.5 KiB
Plaintext
61 lines
2.5 KiB
Plaintext
*---------------------------------------------------------------------------
|
|
*
|
|
* Custom cable to trace an ISDN S0 bus with two passive (!) ISDN boards
|
|
* ---------------------------------------------------------------------
|
|
*
|
|
* $Id: cable.txt,v 1.3 1999/02/14 09:44:58 hm Exp $
|
|
*
|
|
* last edit-date: [Thu Jan 22 19:57:50 1998]
|
|
*
|
|
* -hm documentation of analyze mode
|
|
*
|
|
*---------------------------------------------------------------------------*/
|
|
|
|
The cable consists of a RJ-45 plug with both tx and rx connected and
|
|
two jacks; the tx cables from the plug are wired to one jack and the
|
|
rx cables from the plug are wired to the other jack.
|
|
|
|
The computer must be equipped with two (!) supported passive cards and
|
|
the cable from one card is plugged into one of the jacks while the cable
|
|
to from the other card is plugged into the other jack.
|
|
|
|
Now one card monitors the tx part of the S0 bus and the other card
|
|
monitors the rx part.
|
|
|
|
Which card functions as the rx side and which as the tx side can be
|
|
specified as options to the isdntrace utility (-R and -T) which has
|
|
to be run in analyzer mode (-a) to support this configuration.
|
|
|
|
|
|
1
|
|
2
|
|
3
|
|
+--------------4 receiving-side board
|
|
S0-bus +--|--------------5 in computer (jack for
|
|
to analyze | | 6 cable to passive controller)
|
|
8 | | 7
|
|
7 | | 8
|
|
transmit - 6------------|--|--+
|
|
receive - 5------------+ | |
|
|
receive + 4---------------+ |
|
|
transmit + 3------------+ |
|
|
2 | | 1
|
|
1 | | 2
|
|
plug into | | 3
|
|
S0 bus +-----|-----------4 transmitting-side board
|
|
+-----------5 in computer (jack for
|
|
6 cable to passive controller)
|
|
7
|
|
8
|
|
|
|
|
|
|
|
RJ-45 plug RJ-45 jack
|
|
view from the front view from the front
|
|
cable goes out to the rear
|
|
|
|
/--------- / ----------
|
|
| 87654321 | | 12345678 |
|
|
|__ __|/ |/_ /_|
|
|
|____|/ |/___|
|