160 lines
5.6 KiB
HTML
160 lines
5.6 KiB
HTML
<HTML>
|
|
<HEAD>
|
|
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
|
|
<META NAME="GENERATOR" CONTENT="Mozilla/4.01 [en] (Win95; I) [Netscape]">
|
|
<TITLE>TrueTime GPS/GOES/OMEGA Receivers
|
|
</TITLE>
|
|
</HEAD>
|
|
<BODY>
|
|
|
|
<H3>
|
|
TrueTime GPS/GOES/OMEGA Receivers</H3>
|
|
|
|
<HR>
|
|
<H4>
|
|
Synopsis</H4>
|
|
Address: 127.127.5.<I>u</I>
|
|
<BR>Reference ID: <TT>GPS, OMEGA, GOES</TT>
|
|
<BR>Driver ID: <TT>TRUETIME</TT>
|
|
<BR>Serial Port: <TT>/dev/true<I>u</I></TT>; 9600 baud, 8-bits, no parity
|
|
<BR>Features: <TT>tty_clk</TT>
|
|
<H4>
|
|
Description</H4>
|
|
This driver supports several models models of Kinemetrics/TrueTime timing
|
|
receivers, including 468-DC MK III GOES Synchronized Clock, GPS- DC MK
|
|
III and GPS/TM-TMD GPS Synchronized Clock, XL-DC (a 151-602-210, reported
|
|
by the driver as a GPS/TM-TMD), GPS-800 TCU (an 805-957 with the RS232
|
|
Talker/Listener module), OM-DC OMEGA Synchronized Clock, and very likely
|
|
others in the same model family that use the same timecode formats.
|
|
|
|
<P>Most of this code is originally from refclock_wwvb.c with thanks. It
|
|
has been so mangled that wwvb is not a recognizable ancestor.
|
|
<PRE>Timcode format: ADDD:HH:MM:SSQCL
|
|
|
|
A - control A (this is stripped before we see it)
|
|
Q - Quality indication (see below)
|
|
C - Carriage return
|
|
L - Line feed
|
|
|
|
Quality codes indicate possible error of
|
|
|
|
468-DC GOES Receiver:
|
|
GPS-TM/TMD Receiver:
|
|
? +/- 500 milliseconds # +/- 50 milliseconds
|
|
* +/- 5 milliseconds . +/- 1 millisecond
|
|
space less than 1 millisecond
|
|
|
|
OM-DC OMEGA Receiver:
|
|
|
|
> +/- 5 seconds
|
|
|
|
? +/- 500 milliseconds # +/- 50 milliseconds
|
|
* +/- 5 milliseconds . +/- 1 millisecond
|
|
|
|
A-H less than 1 millisecond. Character indicates which
|
|
station
|
|
is being received as follows: A = Norway, B = Liberia,
|
|
C = Hawaii, D = North Dakota, E = La Reunion, F =
|
|
Argentina,
|
|
G = Australia, H = Japan.</PRE>
|
|
The carriage return start bit begins on 0 seconds and extends to 1 bit
|
|
time.
|
|
|
|
<P>Notes on 468-DC and OMEGA receiver:
|
|
|
|
<P>Send the clock a <TT>R</TT> or <TT>C</TT> and once per second a timestamp
|
|
will appear. Send a <TT>R</TT> to get the satellite position once (GOES
|
|
only).
|
|
|
|
<P>Notes on the 468-DC receiver:
|
|
|
|
<P>Since the old east/west satellite locations are only historical, you
|
|
can't set your clock propagation delay settings correctly and still use
|
|
automatic mode. The manual says to use a compromise when setting the switches.
|
|
This results in significant errors. The solution; use fudge time1 and time2
|
|
to incorporate corrections. If your clock is set for 50 and it should be
|
|
58 for using the west and 46 for using the east, use the line
|
|
|
|
<P><TT>fudge 127.127.5.0 time1 +0.008 time2 -0.004</TT>
|
|
|
|
<P>This corrects the 4 milliseconds advance and 8 milliseconds retard needed.
|
|
The software will ask the clock which satellite it sees.
|
|
|
|
<P>The PCL720 from PC Labs has an Intel 8253 look-alike, as well as a bunch
|
|
of TTL input and output pins, all brought out to the back panel. If you
|
|
wire a PPS signal (such as the TTL PPS coming out of a GOES or other Kinemetrics/Truetime
|
|
clock) to the 8253's GATE0, and then also wire the 8253's OUT0 to the PCL720's
|
|
INPUT3.BIT0, then we can read CTR0 to get the number of microseconds since
|
|
the last PPS upward edge, mediated by reading OUT0 to find out if the counter
|
|
has wrapped around (this happens if more than 65535us (65ms) elapses between
|
|
the PPS event and our being called.)
|
|
<H4>
|
|
Monitor Data</H4>
|
|
When enabled by the <TT>flag4</TT> fudge flag, every received timecode
|
|
is written as-is to the <TT>clockstats</TT> file.
|
|
<H4>
|
|
Fudge Factors</H4>
|
|
|
|
<DL>
|
|
<DT>
|
|
<TT>time1 <I>time</I></TT></DT>
|
|
|
|
<DD>
|
|
Specifies the time offset calibration factor, in seconds and fraction,
|
|
to be used for the West satellite, with default 0.0.</DD>
|
|
|
|
<DT>
|
|
<TT>time2 <I>time</I></TT></DT>
|
|
|
|
<DD>
|
|
. Specifies the time offset calibration factor, in seconds and fraction,
|
|
to be used for the East satellite, with default 0.0.</DD>
|
|
|
|
<DT>
|
|
<TT>stratum <I>number</I></TT></DT>
|
|
|
|
<DD>
|
|
Specifies the driver stratum, in decimal from 0 to 15, with default 0.</DD>
|
|
|
|
<DT>
|
|
<TT>refid <I>string</I></TT></DT>
|
|
|
|
<DD>
|
|
Specifies the driver reference identifier, an ASCII string from one to
|
|
four characters, with default <TT>TRUE</TT>.</DD>
|
|
|
|
<DT>
|
|
<TT>flag1 0 | 1</TT></DT>
|
|
|
|
<DD>
|
|
Silence the clock side of ntpd, just reading the clock without trying to
|
|
write to it.</DD>
|
|
|
|
<DT>
|
|
<TT>flag2 0 | 1</TT></DT>
|
|
|
|
<DD>
|
|
Generate a debug file /tmp/true%d.</DD>
|
|
|
|
<DT>
|
|
<TT>flag3 0 | 1</TT></DT>
|
|
|
|
<DD>
|
|
Not used by this driver.</DD>
|
|
|
|
<DT>
|
|
<TT>flag4 0 | 1</TT></DT>
|
|
|
|
<DD>
|
|
Not used by this driver.</DD>
|
|
</DL>
|
|
Additional Information
|
|
|
|
<P><A HREF="refclock.htm">Reference Clock Drivers</A>
|
|
<HR>
|
|
<ADDRESS>
|
|
David L. Mills (mills@udel.edu)</ADDRESS>
|
|
|
|
</BODY>
|
|
</HTML>
|