d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3a5aee5adc
freebsd-nq/sys/dev/aic7xxx/aic79xx_osm.c
Justin T. Gibbs b3b25f2cbf ahc_eisa.c: 
ahc_pci.c:
ahd_pci.c:
aic7xxx.c:
aic79xx.c:
aic_osm_lib.c:
aic_osm_lib.h:
	Use common OSM routines from aic_osm_lib for bus dma operations,
	delay routines, accessing CCBs, byte swapping, etc.

aic7xxx_pci.c:
	Provide a better description for the 2915/30LP on attach.

aic7xxx.c:
aic79xx.c:
aic7770.c:
aic79xx_pci.c:
aic7xxx_pci.c:
aic7xxx_93cx6.c:
	Move FBSDID behind an ifdef so that these core files will
	still compile under other OSes.

aic79xx.h:
aic79xx_pci.c:
aic79xx.seq:
	To speed up non-packetized CDB delivery in Rev B, all CDB
	acks are "released" to the output sync as soon as the
	command phase starts.  There is only one problem with this
	approach.  If the target changes phase before all data are
	sent, we have left over acks that can go out on the bus in
	a data phase.  Due to other chip contraints, this only
	happens if the target goes to data-in, but if the acks go
	out before we can test SDONE, we'll think that the transfer
	has completed successfully.  Work around this by taking
	advantage of the 400ns or 800ns dead time between command
	phase and the REQ of the new phase.  If the transfer has
	completed successfully, SCSIEN should fall *long* before we
	see a phase change.  We thus treat any phasemiss that
	occurs before SCSIEN falls as an incomplete transfer.

	aic79xx.h:
		Add the AHD_FAST_CDB_DELIVERY feature.

	aic79xx_pci.c:
		Set AHD_FAST_CDB_DELIVERY for all Rev. B parts.

	aic79xx.seq:
		Test for PHASEMIS in the command phase for
		all AHD_FAST_CDB_DELIVERY controlelrs.

ahd_pci.c:
ahc_pci.c:
aic7xxx.h:
aic79xx.h:
	Move definition of controller BAR offsets to core header files.

aic7xxx.c:
aic79xx.c:
	In the softc free routine, leave removal of a softc from the
	global list of softcs to the OSM (the caller of this routine).
	This allows us to avoid holding the softc list_lock during device
	destruction where we may have to sleep waiting for our recovery
	thread to halt.

ahc_pci.c:
	Use ahc_pci_test_register access to validate I/O mapped in
	addition to the tests already performed for memory mapped
	access.

	Remove unused ahc_power_state_change() function.  The PCI
	layer in both 4.X and 5.X now offer this functionality.

ahd_pci.c:
	Remove reduntant definition of controller BAR offsets.  These
	are also defined in aic79xx.h.

	Remove unused ahd_power_state_change() function.  The PCI
	layer in both 4.X and 5.X now offer this functionality.

aic7xxx.c:
aic79xx.c:
aic79xx.h:
aic7xxx.h:
aic7xxx_osm.c:
aic79xx_osm.c:
	Move timeout handling to the driver cores.  In the case
	of the aic79xx driver, the algorithm has been enhanced
	to try target resets before performing a bus reset.  For
	the aic7xxx driver, the algorithm is unchanged.  Although
	the drivers do not currently sleep during recovery (recovery
	is timeout driven), the cores do expect all processing to
	be performed via a recovery thread.  Our timeout handlers
	are now little stubs that wakeup the recovery thread.

aic79xx.c:
aic79xx.h:
aic79xx_inline.h:
	Change shared_data allocation to use a map_node so
	that the sentinel hscb can use this map node in
	ahd_swap_with_next_hscb.  This routine now swaps
	the hscb_map pointer in additon to the hscb
	contents so that any sync operations occur on
	the correct map.

	physaddr -> busaddr

	Pointed out by: Jason Thorpe <thorpej@wasabisystems.com>

aic79xx.c:
	Make more use of the in/out/w/l/q macros for accessing
	byte registers in the chip.

	Correct some issues in the ahd_flush_qoutfifo() routine.
	    o Run the qoutfifo only once the command channel
	      DMA engine has been halted.  This closes a window
	      where we might have missed some entries.
	    o Change ahd_run_data_fifo() to not loop to completion.
	      If we happen to start on the wrong FIFO and the other
	      FIFO has a snapshot savepointers, we might deadlock.
	      This required our delay between FIFO tests to be
	      moved to the ahd_flush_qoutfifo() routine.
	    o Update/add comments.
	    o Remove spurious test for COMPLETE_DMA list being empty
	      when completing transactions from the GSFIFO with
	      residuals.  The SCB must be put on the COMPLETE_DMA
	      scb list unconditionally.
	    o When halting command channel DMA activity, we must
	      disable the DMA channel in all cases but an update
	      of the QOUTFIFO.  The latter case is required so
	      that the sequencer will update its position in the
	      QOUTFIFO.  Previously, we left the channel enabled
	      for all "push" DMAs.  This left us vulnerable to
	      the sequencer handling an SCB push long after that
	      SCB was already processed manually by this routine.
	    o Correct the polarity of tests involving
	      ahd_scb_active_in_fifo().  This routine returns
	      non-zero for true.

	Return to processing bad status completions through
	the qoutfifo.  This reduces the time that the sequencer
	is kept paused when handling transactions with bad
	status or underruns.

	When waiting for the controller to quiece selections,
	add a delay to our loop.  Otherwise we may fail to wait
	long enough for the sequencer to comply.

	On H2A4 hardware, use the slow slewrate for non-paced
	transfers.  This mirrors what the Adaptec Windows
	drivers do.

	On the Rev B. only slow down the CRC timing for
	older U160 devices that might need the slower timing.
	We define "older" as devices that do not support
	packetized protocol.

	Wait up to 5000 * 5us for the SEEPROM to become unbusy.
	Write ops seem to take much longer than read ops.

aic79xx.seq:
	For controllers with the FAINT_LED bug, turn the diagnostic
	led feature on during selection and reselection.  This covers
	the non-packetized case.  The LED will be disabled for
	non-packetized transfers once we return to the top level idle
	loop.  Add more comments about the busy LED workaround.

	Extend a critical section around the entire
	command channel idle loop process.  Previously
	the portion of this handler that directly manipulated
	the linked list of completed SCBs was not protected.
	This is the likely cause of the recent reports of
	commands being completed twice by the driver.

	Extend critical sections across the test for,
	and the longjump to, longjump routines.  This
	prevents the firmware from trying to jump to
	a longjmp handler that was just cleared by the
	host.

	Improve the locations of several critical section
	begin and end points.  Typically these changes
	remove instructions that did not need to be
	inside a critical section.

	Close the "busfree after selection, but before busfree
	interrupts can be enabled" race to just a single sequencer
	instruction.  We now test the BSY line explicitly before
	clearing the busfree status and enabling the busfree
	interrupt.

	Close a race condition in the processing of HS_MAILBOX
	updates.  We now clear the "updated" status before the
	copy.  This ensures that we don't accidentally clear
	the status incorrectly when the host sneaks in an update
	just after our last copy, but before we clear the status.
	This race has never been observed.

	Don't re-enable SCSIEN if we lose the race to disable SCSIEN
	in our interrupt handler's workaround for the RevA data-valid
	too early issue.

aic79xx_inline.h:
	Add comments indicating that the order in which bytes are
	read or written in ahd_inw and ahd_outw is important.  This
	allows us to use these inlines when accessing registers with
	side-effects.

aic79xx_pci.c:
	The 29320 and the 29320B are 7902 not 7901 based products.
	Correct the driver banner.

aic7xxx.h:
	Enable the use of the auto-access pause feature
	on the aic7870 and aic7880.  It was disabled due
	to an oversight.

aic7xxx.reg:
	Move TARG_IMMEDIATE_SCB to alias LAST_MSG to
	avoid leaving garbage in MWI_RESIDUAL.  This
	prevents spurious overflows whn operating target
	mode on controllers that require the MWI_RESIDUAL
	work-around.

aic7xxx.seq:
	AHC_TMODE_WIDEODD_BUG is a bug, not a softc flag.
	Reference the correct softc field when testing
	for its presence.

	Set the NOT_IDENTIFIED and NO_CDB_SENT bits
	in SEQ_FLAGS to indicate that the nexus is
	invalid in await busfree.

aic7xxx_93cx6.c:
	Add support for the C56/C66 versions of the EWEN and EWDS
	commands.

aic7xxx.c:
aic7xxx_pci.c:
	Move test for the validity of left over BIOS data
	to ahc_test_register_access().  This guarantees that
	any left over CHIPRST value is not clobbered by our
	register access test and lost to the test that was
	in ahc_reset.
2003-12-17 00:02:10 +00:00

1707 lines
42 KiB
C
Raw Blame History

/*
* Bus independent FreeBSD shim for the aic79xx based Adaptec SCSI controllers
*
* Copyright (c) 1994-2002 Justin T. Gibbs.
* Copyright (c) 2001-2002 Adaptec Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU Public License ("GPL").
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: //depot/aic7xxx/freebsd/dev/aic7xxx/aic79xx_osm.c#35 $
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <dev/aic7xxx/aic79xx_osm.h>
#include <dev/aic7xxx/aic79xx_inline.h>
#include <sys/kthread.h>
#include "opt_ddb.h"
#ifdef DDB
#include <ddb/ddb.h>
#endif
#ifndef AHD_TMODE_ENABLE
#define AHD_TMODE_ENABLE 0
#endif
#include <dev/aic7xxx/aic_osm_lib.c>
#define ccb_scb_ptr spriv_ptr0
#if UNUSED
static void ahd_dump_targcmd(struct target_cmd *cmd);
#endif
static int ahd_modevent(module_t mod, int type, void *data);
static void ahd_action(struct cam_sim *sim, union ccb *ccb);
static void ahd_set_tran_settings(struct ahd_softc *ahd,
int our_id, char channel,
struct ccb_trans_settings *cts);
static void ahd_get_tran_settings(struct ahd_softc *ahd,
int our_id, char channel,
struct ccb_trans_settings *cts);
static void ahd_async(void *callback_arg, uint32_t code,
struct cam_path *path, void *arg);
static void ahd_execute_scb(void *arg, bus_dma_segment_t *dm_segs,
int nsegments, int error);
static void ahd_poll(struct cam_sim *sim);
static void ahd_setup_data(struct ahd_softc *ahd, struct cam_sim *sim,
struct ccb_scsiio *csio, struct scb *scb);
static void ahd_abort_ccb(struct ahd_softc *ahd, struct cam_sim *sim,
union ccb *ccb);
static int ahd_create_path(struct ahd_softc *ahd,
char channel, u_int target, u_int lun,
struct cam_path **path);
static int
ahd_create_path(struct ahd_softc *ahd, char channel, u_int target,
u_int lun, struct cam_path **path)
{
path_id_t path_id;
path_id = cam_sim_path(ahd->platform_data->sim);
return (xpt_create_path(path, /*periph*/NULL,
path_id, target, lun));
}
int
ahd_map_int(struct ahd_softc *ahd)
{
int error;
/* Hook up our interrupt handler */
error = bus_setup_intr(ahd->dev_softc, ahd->platform_data->irq,
INTR_TYPE_CAM, ahd_platform_intr, ahd,
&ahd->platform_data->ih);
if (error != 0)
device_printf(ahd->dev_softc, "bus_setup_intr() failed: %d\n",
error);
return (error);
}
/*
* Attach all the sub-devices we can find
*/
int
ahd_attach(struct ahd_softc *ahd)
{
char ahd_info[256];
struct ccb_setasync csa;
struct cam_devq *devq;
struct cam_sim *sim;
struct cam_path *path;
long s;
int count;
count = 0;
devq = NULL;
sim = NULL;
/*
* Create a thread to perform all recovery.
*/
if (ahd_spawn_recovery_thread(ahd) != 0)
goto fail;
ahd_controller_info(ahd, ahd_info);
printf("%s\n", ahd_info);
ahd_lock(ahd, &s);
/*
* Create the device queue for our SIM(s).
*/
devq = cam_simq_alloc(AHD_MAX_QUEUE);
if (devq == NULL)
goto fail;
/*
* Construct our SIM entry
*/
sim = cam_sim_alloc(ahd_action, ahd_poll, "ahd", ahd,
device_get_unit(ahd->dev_softc),
1, /*XXX*/256, devq);
if (sim == NULL) {
cam_simq_free(devq);
goto fail;
}
if (xpt_bus_register(sim, /*bus_id*/0) != CAM_SUCCESS) {
cam_sim_free(sim, /*free_devq*/TRUE);
sim = NULL;
goto fail;
}
if (xpt_create_path(&path, /*periph*/NULL,
cam_sim_path(sim), CAM_TARGET_WILDCARD,
CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister(cam_sim_path(sim));
cam_sim_free(sim, /*free_devq*/TRUE);
sim = NULL;
goto fail;
}
xpt_setup_ccb(&csa.ccb_h, path, /*priority*/5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_LOST_DEVICE;
csa.callback = ahd_async;
csa.callback_arg = sim;
xpt_action((union ccb *)&csa);
count++;
fail:
ahd->platform_data->sim = sim;
ahd->platform_data->path = path;
if (count != 0) {
/* We have to wait until after any system dumps... */
ahd->platform_data->eh =
EVENTHANDLER_REGISTER(shutdown_final, ahd_shutdown,
ahd, SHUTDOWN_PRI_DEFAULT);
ahd_intr_enable(ahd, TRUE);
}
ahd_unlock(ahd, &s);
return (count);
}
/*
* Catch an interrupt from the adapter
*/
void
ahd_platform_intr(void *arg)
{
struct ahd_softc *ahd;
ahd = (struct ahd_softc *)arg;
ahd_intr(ahd);
}
/*
* We have an scb which has been processed by the
* adaptor, now we look to see how the operation
* went.
*/
void
ahd_done(struct ahd_softc *ahd, struct scb *scb)
{
union ccb *ccb;
CAM_DEBUG(scb->io_ctx->ccb_h.path, CAM_DEBUG_TRACE,
("ahd_done - scb %d\n", SCB_GET_TAG(scb)));
ccb = scb->io_ctx;
LIST_REMOVE(scb, pending_links);
if ((scb->flags & SCB_TIMEDOUT) != 0)
LIST_REMOVE(scb, timedout_links);
untimeout(ahd_platform_timeout, (caddr_t)scb, ccb->ccb_h.timeout_ch);
if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
bus_dmasync_op_t op;
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
op = BUS_DMASYNC_POSTREAD;
else
op = BUS_DMASYNC_POSTWRITE;
bus_dmamap_sync(ahd->buffer_dmat, scb->dmamap, op);
bus_dmamap_unload(ahd->buffer_dmat, scb->dmamap);
}
#ifdef AHD_TARGET_MODE
if (ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
struct cam_path *ccb_path;
/*
* If we have finally disconnected, clean up our
* pending device state.
* XXX - There may be error states that cause where
* we will remain connected.
*/
ccb_path = ccb->ccb_h.path;
if (ahd->pending_device != NULL
&& xpt_path_comp(ahd->pending_device->path, ccb_path) == 0) {
if ((ccb->ccb_h.flags & CAM_SEND_STATUS) != 0) {
ahd->pending_device = NULL;
} else {
xpt_print_path(ccb->ccb_h.path);
printf("Still disconnected\n");
ahd_freeze_ccb(ccb);
}
}
if (aic_get_transaction_status(scb) == CAM_REQ_INPROG)
ccb->ccb_h.status |= CAM_REQ_CMP;
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
ahd_free_scb(ahd, scb);
xpt_done(ccb);
return;
}
#endif
/*
* If the recovery SCB completes, we have to be
* out of our timeout.
*/
if ((scb->flags & SCB_RECOVERY_SCB) != 0) {
struct scb *list_scb;
/*
* We were able to complete the command successfully,
* so reinstate the timeouts for all other pending
* commands.
*/
LIST_FOREACH(list_scb, &ahd->pending_scbs, pending_links) {
union ccb *ccb;
uint64_t time;
ccb = list_scb->io_ctx;
if (ccb->ccb_h.timeout == CAM_TIME_INFINITY)
continue;
time = ccb->ccb_h.timeout;
time *= hz;
time /= 1000;
ccb->ccb_h.timeout_ch =
timeout(ahd_platform_timeout, list_scb, time);
}
if (aic_get_transaction_status(scb) == CAM_BDR_SENT
|| aic_get_transaction_status(scb) == CAM_REQ_ABORTED)
aic_set_transaction_status(scb, CAM_CMD_TIMEOUT);
ahd_print_path(ahd, scb);
printf("no longer in timeout, status = %x\n",
ccb->ccb_h.status);
}
/* Don't clobber any existing error state */
if (aic_get_transaction_status(scb) == CAM_REQ_INPROG) {
ccb->ccb_h.status |= CAM_REQ_CMP;
} else if ((scb->flags & SCB_SENSE) != 0) {
/*
* We performed autosense retrieval.
*
* Zero any sense not transferred by the
* device. The SCSI spec mandates that any
* untransfered data should be assumed to be
* zero. Complete the 'bounce' of sense information
* through buffers accessible via bus-space by
* copying it into the clients csio.
*/
memset(&ccb->csio.sense_data, 0, sizeof(ccb->csio.sense_data));
memcpy(&ccb->csio.sense_data,
ahd_get_sense_buf(ahd, scb),
/* XXX What size do we want to use??? */
sizeof(ccb->csio.sense_data)
- ccb->csio.sense_resid);
scb->io_ctx->ccb_h.status |= CAM_AUTOSNS_VALID;
} else if ((scb->flags & SCB_PKT_SENSE) != 0) {
struct scsi_status_iu_header *siu;
u_int sense_len;
int i;
/*
* Copy only the sense data into the provided buffer.
*/
siu = (struct scsi_status_iu_header *)scb->sense_data;
sense_len = MIN(scsi_4btoul(siu->sense_length),
sizeof(ccb->csio.sense_data));
memset(&ccb->csio.sense_data, 0, sizeof(ccb->csio.sense_data));
memcpy(&ccb->csio.sense_data,
ahd_get_sense_buf(ahd, scb) + SIU_SENSE_OFFSET(siu),
sense_len);
printf("Copied %d bytes of sense data offset %d:", sense_len,
SIU_SENSE_OFFSET(siu));
for (i = 0; i < sense_len; i++)
printf(" 0x%x", ((uint8_t *)&ccb->csio.sense_data)[i]);
printf("\n");
scb->io_ctx->ccb_h.status |= CAM_AUTOSNS_VALID;
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
ahd_free_scb(ahd, scb);
xpt_done(ccb);
}
static void
ahd_action(struct cam_sim *sim, union ccb *ccb)
{
struct ahd_softc *ahd;
#ifdef AHD_TARGET_MODE
struct ahd_tmode_lstate *lstate;
#endif
u_int target_id;
u_int our_id;
long s;
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("ahd_action\n"));
ahd = (struct ahd_softc *)cam_sim_softc(sim);
target_id = ccb->ccb_h.target_id;
our_id = SIM_SCSI_ID(ahd, sim);
switch (ccb->ccb_h.func_code) {
/* Common cases first */
#ifdef AHD_TARGET_MODE
case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */
case XPT_CONT_TARGET_IO:/* Continue Host Target I/O Connection*/
{
struct ahd_tmode_tstate *tstate;
cam_status status;
status = ahd_find_tmode_devs(ahd, sim, ccb, &tstate,
&lstate, TRUE);
if (status != CAM_REQ_CMP) {
if (ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
/* Response from the black hole device */
tstate = NULL;
lstate = ahd->black_hole;
} else {
ccb->ccb_h.status = status;
xpt_done(ccb);
break;
}
}
if (ccb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) {
ahd_lock(ahd, &s);
SLIST_INSERT_HEAD(&lstate->accept_tios, &ccb->ccb_h,
sim_links.sle);
ccb->ccb_h.status = CAM_REQ_INPROG;
if ((ahd->flags & AHD_TQINFIFO_BLOCKED) != 0)
ahd_run_tqinfifo(ahd, /*paused*/FALSE);
ahd_unlock(ahd, &s);
break;
}
/*
* The target_id represents the target we attempt to
* select. In target mode, this is the initiator of
* the original command.
*/
our_id = target_id;
target_id = ccb->csio.init_id;
/* FALLTHROUGH */
}
#endif
case XPT_SCSI_IO: /* Execute the requested I/O operation */
case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */
{
struct scb *scb;
struct hardware_scb *hscb;
struct ahd_initiator_tinfo *tinfo;
struct ahd_tmode_tstate *tstate;
u_int col_idx;
if ((ahd->flags & AHD_INITIATORROLE) == 0
&& (ccb->ccb_h.func_code == XPT_SCSI_IO
|| ccb->ccb_h.func_code == XPT_RESET_DEV)) {
ccb->ccb_h.status = CAM_PROVIDE_FAIL;
xpt_done(ccb);
return;
}
/*
* get an scb to use.
*/
ahd_lock(ahd, &s);
tinfo = ahd_fetch_transinfo(ahd, 'A', our_id,
target_id, &tstate);
if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) == 0
|| (tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0
|| ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
col_idx = AHD_NEVER_COL_IDX;
} else {
col_idx = AHD_BUILD_COL_IDX(target_id,
ccb->ccb_h.target_lun);
}
if ((scb = ahd_get_scb(ahd, col_idx)) == NULL) {
xpt_freeze_simq(sim, /*count*/1);
ahd->flags |= AHD_RESOURCE_SHORTAGE;
ahd_unlock(ahd, &s);
ccb->ccb_h.status = CAM_REQUEUE_REQ;
xpt_done(ccb);
return;
}
ahd_unlock(ahd, &s);
hscb = scb->hscb;
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_SUBTRACE,
("start scb(%p)\n", scb));
scb->io_ctx = ccb;
/*
* So we can find the SCB when an abort is requested
*/
ccb->ccb_h.ccb_scb_ptr = scb;
/*
* Put all the arguments for the xfer in the scb
*/
hscb->control = 0;
hscb->scsiid = BUILD_SCSIID(ahd, sim, target_id, our_id);
hscb->lun = ccb->ccb_h.target_lun;
if (ccb->ccb_h.func_code == XPT_RESET_DEV) {
hscb->cdb_len = 0;
scb->flags |= SCB_DEVICE_RESET;
hscb->control |= MK_MESSAGE;
hscb->task_management = SIU_TASKMGMT_LUN_RESET;
ahd_execute_scb(scb, NULL, 0, 0);
} else {
#ifdef AHD_TARGET_MODE
if (ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
struct target_data *tdata;
tdata = &hscb->shared_data.tdata;
if (ahd->pending_device == lstate)
scb->flags |= SCB_TARGET_IMMEDIATE;
hscb->control |= TARGET_SCB;
tdata->target_phases = 0;
if ((ccb->ccb_h.flags & CAM_SEND_STATUS) != 0) {
tdata->target_phases |= SPHASE_PENDING;
tdata->scsi_status =
ccb->csio.scsi_status;
}
if (ccb->ccb_h.flags & CAM_DIS_DISCONNECT)
tdata->target_phases |= NO_DISCONNECT;
tdata->initiator_tag =
ahd_htole16(ccb->csio.tag_id);
}
#endif
hscb->task_management = 0;
if (ccb->ccb_h.flags & CAM_TAG_ACTION_VALID)
hscb->control |= ccb->csio.tag_action;
ahd_setup_data(ahd, sim, &ccb->csio, scb);
}
break;
}
#ifdef AHD_TARGET_MODE
case XPT_NOTIFY_ACK:
case XPT_IMMED_NOTIFY:
{
struct ahd_tmode_tstate *tstate;
struct ahd_tmode_lstate *lstate;
cam_status status;
status = ahd_find_tmode_devs(ahd, sim, ccb, &tstate,
&lstate, TRUE);
if (status != CAM_REQ_CMP) {
ccb->ccb_h.status = status;
xpt_done(ccb);
break;
}
SLIST_INSERT_HEAD(&lstate->immed_notifies, &ccb->ccb_h,
sim_links.sle);
ccb->ccb_h.status = CAM_REQ_INPROG;
ahd_send_lstate_events(ahd, lstate);
break;
}
case XPT_EN_LUN: /* Enable LUN as a target */
ahd_handle_en_lun(ahd, sim, ccb);
xpt_done(ccb);
break;
#endif
case XPT_ABORT: /* Abort the specified CCB */
{
ahd_abort_ccb(ahd, sim, ccb);
break;
}
case XPT_SET_TRAN_SETTINGS:
{
ahd_lock(ahd, &s);
ahd_set_tran_settings(ahd, SIM_SCSI_ID(ahd, sim),
SIM_CHANNEL(ahd, sim), &ccb->cts);
ahd_unlock(ahd, &s);
xpt_done(ccb);
break;
}
case XPT_GET_TRAN_SETTINGS:
/* Get default/user set transfer settings for the target */
{
ahd_lock(ahd, &s);
ahd_get_tran_settings(ahd, SIM_SCSI_ID(ahd, sim),
SIM_CHANNEL(ahd, sim), &ccb->cts);
ahd_unlock(ahd, &s);
xpt_done(ccb);
break;
}
case XPT_CALC_GEOMETRY:
{
aic_calc_geometry(&ccb->ccg, ahd->flags & AHD_EXTENDED_TRANS_A);
xpt_done(ccb);
break;
}
case XPT_RESET_BUS: /* Reset the specified SCSI bus */
{
int found;
ahd_lock(ahd, &s);
found = ahd_reset_channel(ahd, SIM_CHANNEL(ahd, sim),
/*initiate reset*/TRUE);
ahd_unlock(ahd, &s);
if (bootverbose) {
xpt_print_path(SIM_PATH(ahd, sim));
printf("SCSI bus reset delivered. "
"%d SCBs aborted.\n", found);
}
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_TERM_IO: /* Terminate the I/O process */
/* XXX Implement */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi = &ccb->cpi;
cpi->version_num = 1; /* XXX??? */
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE;
if ((ahd->features & AHD_WIDE) != 0)
cpi->hba_inquiry |= PI_WIDE_16;
if ((ahd->features & AHD_TARGETMODE) != 0) {
cpi->target_sprt = PIT_PROCESSOR
| PIT_DISCONNECT
| PIT_TERM_IO;
} else {
cpi->target_sprt = 0;
}
cpi->hba_misc = 0;
cpi->hba_eng_cnt = 0;
cpi->max_target = (ahd->features & AHD_WIDE) ? 15 : 7;
cpi->max_lun = AHD_NUM_LUNS - 1;
cpi->initiator_id = ahd->our_id;
if ((ahd->flags & AHD_RESET_BUS_A) == 0) {
cpi->hba_misc |= PIM_NOBUSRESET;
}
cpi->bus_id = cam_sim_bus(sim);
cpi->base_transfer_speed = 3300;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "Adaptec", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
#ifdef AHD_NEW_TRAN_SETTINGS
cpi->protocol = PROTO_SCSI;
cpi->protocol_version = SCSI_REV_2;
cpi->transport = XPORT_SPI;
cpi->transport_version = 2;
cpi->xport_specific.spi.ppr_options = SID_SPI_CLOCK_ST;
cpi->transport_version = 4;
cpi->xport_specific.spi.ppr_options = SID_SPI_CLOCK_DT_ST;
#endif
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
default:
ccb->ccb_h.status = CAM_PROVIDE_FAIL;
xpt_done(ccb);
break;
}
}
static void
ahd_set_tran_settings(struct ahd_softc *ahd, int our_id, char channel,
struct ccb_trans_settings *cts)
{
#ifdef AHD_NEW_TRAN_SETTINGS
struct ahd_devinfo devinfo;
struct ccb_trans_settings_scsi *scsi;
struct ccb_trans_settings_spi *spi;
struct ahd_initiator_tinfo *tinfo;
struct ahd_tmode_tstate *tstate;
uint16_t *discenable;
uint16_t *tagenable;
u_int update_type;
scsi = &cts->proto_specific.scsi;
spi = &cts->xport_specific.spi;
ahd_compile_devinfo(&devinfo, SIM_SCSI_ID(ahd, sim),
cts->ccb_h.target_id,
cts->ccb_h.target_lun,
SIM_CHANNEL(ahd, sim),
ROLE_UNKNOWN);
tinfo = ahd_fetch_transinfo(ahd, devinfo.channel,
devinfo.our_scsiid,
devinfo.target, &tstate);
update_type = 0;
if (cts->type == CTS_TYPE_CURRENT_SETTINGS) {
update_type |= AHD_TRANS_GOAL;
discenable = &tstate->discenable;
tagenable = &tstate->tagenable;
tinfo->curr.protocol_version = cts->protocol_version;
tinfo->curr.transport_version = cts->transport_version;
tinfo->goal.protocol_version = cts->protocol_version;
tinfo->goal.transport_version = cts->transport_version;
} else if (cts->type == CTS_TYPE_USER_SETTINGS) {
update_type |= AHD_TRANS_USER;
discenable = &ahd->user_discenable;
tagenable = &ahd->user_tagenable;
tinfo->user.protocol_version = cts->protocol_version;
tinfo->user.transport_version = cts->transport_version;
} else {
cts->ccb_h.status = CAM_REQ_INVALID;
return;
}
if ((spi->valid & CTS_SPI_VALID_DISC) != 0) {
if ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0)
*discenable |= devinfo.target_mask;
else
*discenable &= ~devinfo.target_mask;
}
if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) {
if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0)
*tagenable |= devinfo.target_mask;
else
*tagenable &= ~devinfo.target_mask;
}
if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) {
ahd_validate_width(ahd, /*tinfo limit*/NULL,
&spi->bus_width, ROLE_UNKNOWN);
ahd_set_width(ahd, &devinfo, spi->bus_width,
update_type, /*paused*/FALSE);
}
if ((spi->valid & CTS_SPI_VALID_PPR_OPTIONS) == 0) {
if (update_type == AHD_TRANS_USER)
spi->ppr_options = tinfo->user.ppr_options;
else
spi->ppr_options = tinfo->goal.ppr_options;
}
if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) == 0) {
if (update_type == AHD_TRANS_USER)
spi->sync_offset = tinfo->user.offset;
else
spi->sync_offset = tinfo->goal.offset;
}
if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) == 0) {
if (update_type == AHD_TRANS_USER)
spi->sync_period = tinfo->user.period;
else
spi->sync_period = tinfo->goal.period;
}
if (((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0)
|| ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0)) {
u_int maxsync;
maxsync = AHD_SYNCRATE_MAX;
if (spi->bus_width != MSG_EXT_WDTR_BUS_16_BIT)
spi->ppr_options &= ~MSG_EXT_PPR_DT_REQ;
if ((*discenable & devinfo.target_mask) == 0)
spi->ppr_options &= ~MSG_EXT_PPR_IU_REQ;
ahd_find_syncrate(ahd, &spi->sync_period,
&spi->ppr_options, maxsync);
ahd_validate_offset(ahd, /*tinfo limit*/NULL,
spi->sync_period, &spi->sync_offset,
spi->bus_width, ROLE_UNKNOWN);
/* We use a period of 0 to represent async */
if (spi->sync_offset == 0) {
spi->sync_period = 0;
spi->ppr_options = 0;
}
ahd_set_syncrate(ahd, &devinfo, spi->sync_period,
spi->sync_offset, spi->ppr_options,
update_type, /*paused*/FALSE);
}
cts->ccb_h.status = CAM_REQ_CMP;
#else
struct ahd_devinfo devinfo;
struct ahd_initiator_tinfo *tinfo;
struct ahd_tmode_tstate *tstate;
uint16_t *discenable;
uint16_t *tagenable;
u_int update_type;
ahd_compile_devinfo(&devinfo, SIM_SCSI_ID(ahd, sim),
cts->ccb_h.target_id,
cts->ccb_h.target_lun,
SIM_CHANNEL(ahd, sim),
ROLE_UNKNOWN);
tinfo = ahd_fetch_transinfo(ahd, devinfo.channel,
devinfo.our_scsiid,
devinfo.target, &tstate);
update_type = 0;
if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0) {
update_type |= AHD_TRANS_GOAL;
discenable = &tstate->discenable;
tagenable = &tstate->tagenable;
} else if ((cts->flags & CCB_TRANS_USER_SETTINGS) != 0) {
update_type |= AHD_TRANS_USER;
discenable = &ahd->user_discenable;
tagenable = &ahd->user_tagenable;
} else {
cts->ccb_h.status = CAM_REQ_INVALID;
return;
}
if ((cts->valid & CCB_TRANS_DISC_VALID) != 0) {
if ((cts->flags & CCB_TRANS_DISC_ENB) != 0)
*discenable |= devinfo.target_mask;
else
*discenable &= ~devinfo.target_mask;
}
if ((cts->valid & CCB_TRANS_TQ_VALID) != 0) {
if ((cts->flags & CCB_TRANS_TAG_ENB) != 0)
*tagenable |= devinfo.target_mask;
else
*tagenable &= ~devinfo.target_mask;
}
if ((cts->valid & CCB_TRANS_BUS_WIDTH_VALID) != 0) {
ahd_validate_width(ahd, /*tinfo limit*/NULL,
&cts->bus_width, ROLE_UNKNOWN);
ahd_set_width(ahd, &devinfo, cts->bus_width,
update_type, /*paused*/FALSE);
}
if ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) == 0) {
if (update_type == AHD_TRANS_USER)
cts->sync_offset = tinfo->user.offset;
else
cts->sync_offset = tinfo->goal.offset;
}
if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) == 0) {
if (update_type == AHD_TRANS_USER)
cts->sync_period = tinfo->user.period;
else
cts->sync_period = tinfo->goal.period;
}
if (((cts->valid & CCB_TRANS_SYNC_RATE_VALID) != 0)
|| ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) != 0)
|| ((cts->valid & CCB_TRANS_TQ_VALID) != 0)
|| ((cts->valid & CCB_TRANS_DISC_VALID) != 0)) {
u_int ppr_options;
u_int maxsync;
maxsync = AHD_SYNCRATE_MAX;
ppr_options = 0;
if (cts->sync_period <= AHD_SYNCRATE_DT
&& cts->bus_width == MSG_EXT_WDTR_BUS_16_BIT) {
ppr_options = tinfo->user.ppr_options
| MSG_EXT_PPR_DT_REQ;
}
if ((*tagenable & devinfo.target_mask) == 0
|| (*discenable & devinfo.target_mask) == 0)
ppr_options &= ~MSG_EXT_PPR_IU_REQ;
ahd_find_syncrate(ahd, &cts->sync_period,
&ppr_options, maxsync);
ahd_validate_offset(ahd, /*tinfo limit*/NULL,
cts->sync_period, &cts->sync_offset,
MSG_EXT_WDTR_BUS_8_BIT,
ROLE_UNKNOWN);
/* We use a period of 0 to represent async */
if (cts->sync_offset == 0) {
cts->sync_period = 0;
ppr_options = 0;
}
if (ppr_options != 0
&& tinfo->user.transport_version >= 3) {
tinfo->goal.transport_version =
tinfo->user.transport_version;
tinfo->curr.transport_version =
tinfo->user.transport_version;
}
ahd_set_syncrate(ahd, &devinfo, cts->sync_period,
cts->sync_offset, ppr_options,
update_type, /*paused*/FALSE);
}
cts->ccb_h.status = CAM_REQ_CMP;
#endif
}
static void
ahd_get_tran_settings(struct ahd_softc *ahd, int our_id, char channel,
struct ccb_trans_settings *cts)
{
#ifdef AHD_NEW_TRAN_SETTINGS
struct ahd_devinfo devinfo;
struct ccb_trans_settings_scsi *scsi;
struct ccb_trans_settings_spi *spi;
struct ahd_initiator_tinfo *targ_info;
struct ahd_tmode_tstate *tstate;
struct ahd_transinfo *tinfo;
scsi = &cts->proto_specific.scsi;
spi = &cts->xport_specific.spi;
ahd_compile_devinfo(&devinfo, our_id,
cts->ccb_h.target_id,
cts->ccb_h.target_lun,
channel, ROLE_UNKNOWN);
targ_info = ahd_fetch_transinfo(ahd, devinfo.channel,
devinfo.our_scsiid,
devinfo.target, &tstate);
if (cts->type == CTS_TYPE_CURRENT_SETTINGS)
tinfo = &targ_info->curr;
else
tinfo = &targ_info->user;
scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB;
if (cts->type == CTS_TYPE_USER_SETTINGS) {
if ((ahd->user_discenable & devinfo.target_mask) != 0)
spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
if ((ahd->user_tagenable & devinfo.target_mask) != 0)
scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
} else {
if ((tstate->discenable & devinfo.target_mask) != 0)
spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
if ((tstate->tagenable & devinfo.target_mask) != 0)
scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
}
cts->protocol_version = tinfo->protocol_version;
cts->transport_version = tinfo->transport_version;
spi->sync_period = tinfo->period;
spi->sync_offset = tinfo->offset;
spi->bus_width = tinfo->width;
spi->ppr_options = tinfo->ppr_options;
cts->protocol = PROTO_SCSI;
cts->transport = XPORT_SPI;
spi->valid = CTS_SPI_VALID_SYNC_RATE
| CTS_SPI_VALID_SYNC_OFFSET
| CTS_SPI_VALID_BUS_WIDTH
| CTS_SPI_VALID_PPR_OPTIONS;
if (cts->ccb_h.target_lun != CAM_LUN_WILDCARD) {
scsi->valid = CTS_SCSI_VALID_TQ;
spi->valid |= CTS_SPI_VALID_DISC;
} else {
scsi->valid = 0;
}
cts->ccb_h.status = CAM_REQ_CMP;
#else
struct ahd_devinfo devinfo;
struct ahd_initiator_tinfo *targ_info;
struct ahd_tmode_tstate *tstate;
struct ahd_transinfo *tinfo;
ahd_compile_devinfo(&devinfo, our_id,
cts->ccb_h.target_id,
cts->ccb_h.target_lun,
channel, ROLE_UNKNOWN);
targ_info = ahd_fetch_transinfo(ahd, devinfo.channel,
devinfo.our_scsiid,
devinfo.target, &tstate);
if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0)
tinfo = &targ_info->curr;
else
tinfo = &targ_info->user;
cts->flags &= ~(CCB_TRANS_DISC_ENB|CCB_TRANS_TAG_ENB);
if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) == 0) {
if ((ahd->user_discenable & devinfo.target_mask) != 0)
cts->flags |= CCB_TRANS_DISC_ENB;
if ((ahd->user_tagenable & devinfo.target_mask) != 0)
cts->flags |= CCB_TRANS_TAG_ENB;
} else {
if ((tstate->discenable & devinfo.target_mask) != 0)
cts->flags |= CCB_TRANS_DISC_ENB;
if ((tstate->tagenable & devinfo.target_mask) != 0)
cts->flags |= CCB_TRANS_TAG_ENB;
}
cts->sync_period = tinfo->period;
cts->sync_offset = tinfo->offset;
cts->bus_width = tinfo->width;
cts->valid = CCB_TRANS_SYNC_RATE_VALID
| CCB_TRANS_SYNC_OFFSET_VALID
| CCB_TRANS_BUS_WIDTH_VALID;
if (cts->ccb_h.target_lun != CAM_LUN_WILDCARD)
cts->valid |= CCB_TRANS_DISC_VALID|CCB_TRANS_TQ_VALID;
cts->ccb_h.status = CAM_REQ_CMP;
#endif
}
static void
ahd_async(void *callback_arg, uint32_t code, struct cam_path *path, void *arg)
{
struct ahd_softc *ahd;
struct cam_sim *sim;
sim = (struct cam_sim *)callback_arg;
ahd = (struct ahd_softc *)cam_sim_softc(sim);
switch (code) {
case AC_LOST_DEVICE:
{
struct ahd_devinfo devinfo;
long s;
ahd_compile_devinfo(&devinfo, SIM_SCSI_ID(ahd, sim),
xpt_path_target_id(path),
xpt_path_lun_id(path),
SIM_CHANNEL(ahd, sim),
ROLE_UNKNOWN);
/*
* Revert to async/narrow transfers
* for the next device.
*/
ahd_lock(ahd, &s);
ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
AHD_TRANS_GOAL|AHD_TRANS_CUR, /*paused*/FALSE);
ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0,
/*ppr_options*/0, AHD_TRANS_GOAL|AHD_TRANS_CUR,
/*paused*/FALSE);
ahd_unlock(ahd, &s);
break;
}
default:
break;
}
}
static void
ahd_execute_scb(void *arg, bus_dma_segment_t *dm_segs, int nsegments,
int error)
{
struct scb *scb;
union ccb *ccb;
struct ahd_softc *ahd;
struct ahd_initiator_tinfo *tinfo;
struct ahd_tmode_tstate *tstate;
u_int mask;
u_long s;
scb = (struct scb *)arg;
ccb = scb->io_ctx;
ahd = scb->ahd_softc;
if (error != 0) {
if (error == EFBIG)
aic_set_transaction_status(scb, CAM_REQ_TOO_BIG);
else
aic_set_transaction_status(scb, CAM_REQ_CMP_ERR);
if (nsegments != 0)
bus_dmamap_unload(ahd->buffer_dmat, scb->dmamap);
ahd_lock(ahd, &s);
ahd_free_scb(ahd, scb);
ahd_unlock(ahd, &s);
xpt_done(ccb);
return;
}
scb->sg_count = 0;
if (nsegments != 0) {
void *sg;
bus_dmasync_op_t op;
u_int i;
/* Copy the segments into our SG list */
for (i = nsegments, sg = scb->sg_list; i > 0; i--) {
sg = ahd_sg_setup(ahd, scb, sg, dm_segs->ds_addr,
dm_segs->ds_len,
/*last*/i == 1);
dm_segs++;
}
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
op = BUS_DMASYNC_PREREAD;
else
op = BUS_DMASYNC_PREWRITE;
bus_dmamap_sync(ahd->buffer_dmat, scb->dmamap, op);
if (ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
struct target_data *tdata;
tdata = &scb->hscb->shared_data.tdata;
tdata->target_phases |= DPHASE_PENDING;
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT)
tdata->data_phase = P_DATAOUT;
else
tdata->data_phase = P_DATAIN;
}
}
ahd_lock(ahd, &s);
/*
* Last time we need to check if this SCB needs to
* be aborted.
*/
if (aic_get_transaction_status(scb) != CAM_REQ_INPROG) {
if (nsegments != 0)
bus_dmamap_unload(ahd->buffer_dmat,
scb->dmamap);
ahd_free_scb(ahd, scb);
ahd_unlock(ahd, &s);
xpt_done(ccb);
return;
}
tinfo = ahd_fetch_transinfo(ahd, SCSIID_CHANNEL(ahd, scb->hscb->scsiid),
SCSIID_OUR_ID(scb->hscb->scsiid),
SCSIID_TARGET(ahd, scb->hscb->scsiid),
&tstate);
mask = SCB_GET_TARGET_MASK(ahd, scb);
if ((tstate->discenable & mask) != 0
&& (ccb->ccb_h.flags & CAM_DIS_DISCONNECT) == 0)
scb->hscb->control |= DISCENB;
if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
scb->flags |= SCB_PACKETIZED;
if (scb->hscb->task_management != 0)
scb->hscb->control &= ~MK_MESSAGE;
}
if ((ccb->ccb_h.flags & CAM_NEGOTIATE) != 0
&& (tinfo->goal.width != 0
|| tinfo->goal.period != 0
|| tinfo->goal.ppr_options != 0)) {
scb->flags |= SCB_NEGOTIATE;
scb->hscb->control |= MK_MESSAGE;
} else if ((tstate->auto_negotiate & mask) != 0) {
scb->flags |= SCB_AUTO_NEGOTIATE;
scb->hscb->control |= MK_MESSAGE;
}
LIST_INSERT_HEAD(&ahd->pending_scbs, scb, pending_links);
ccb->ccb_h.status |= CAM_SIM_QUEUED;
if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) {
uint64_t time;
if (ccb->ccb_h.timeout == CAM_TIME_DEFAULT)
ccb->ccb_h.timeout = 5 * 1000;
time = ccb->ccb_h.timeout;
time *= hz;
time /= 1000;
ccb->ccb_h.timeout_ch =
timeout(ahd_platform_timeout, (caddr_t)scb, time);
}
if ((scb->flags & SCB_TARGET_IMMEDIATE) != 0) {
/* Define a mapping from our tag to the SCB. */
ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = scb;
ahd_pause(ahd);
ahd_set_scbptr(ahd, SCB_GET_TAG(scb));
ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG);
ahd_unpause(ahd);
} else {
ahd_queue_scb(ahd, scb);
}
ahd_unlock(ahd, &s);
}
static void
ahd_poll(struct cam_sim *sim)
{
ahd_intr(cam_sim_softc(sim));
}
static void
ahd_setup_data(struct ahd_softc *ahd, struct cam_sim *sim,
struct ccb_scsiio *csio, struct scb *scb)
{
struct hardware_scb *hscb;
struct ccb_hdr *ccb_h;
hscb = scb->hscb;
ccb_h = &csio->ccb_h;
csio->resid = 0;
csio->sense_resid = 0;
if (ccb_h->func_code == XPT_SCSI_IO) {
hscb->cdb_len = csio->cdb_len;
if ((ccb_h->flags & CAM_CDB_POINTER) != 0) {
if (hscb->cdb_len > MAX_CDB_LEN
&& (ccb_h->flags & CAM_CDB_PHYS) == 0) {
u_long s;
/*
* Should CAM start to support CDB sizes
* greater than 16 bytes, we could use
* the sense buffer to store the CDB.
*/
aic_set_transaction_status(scb,
CAM_REQ_INVALID);
ahd_lock(ahd, &s);
ahd_free_scb(ahd, scb);
ahd_unlock(ahd, &s);
xpt_done((union ccb *)csio);
return;
}
if ((ccb_h->flags & CAM_CDB_PHYS) != 0) {
hscb->shared_data.idata.cdb_from_host.cdbptr =
aic_htole64((uintptr_t)csio->cdb_io.cdb_ptr);
hscb->shared_data.idata.cdb_from_host.cdblen =
csio->cdb_len;
hscb->cdb_len |= SCB_CDB_LEN_PTR;
} else {
memcpy(hscb->shared_data.idata.cdb,
csio->cdb_io.cdb_ptr,
hscb->cdb_len);
}
} else {
if (hscb->cdb_len > MAX_CDB_LEN) {
u_long s;
aic_set_transaction_status(scb,
CAM_REQ_INVALID);
ahd_lock(ahd, &s);
ahd_free_scb(ahd, scb);
ahd_unlock(ahd, &s);
xpt_done((union ccb *)csio);
return;
}
memcpy(hscb->shared_data.idata.cdb,
csio->cdb_io.cdb_bytes, hscb->cdb_len);
}
}
/* Only use S/G if there is a transfer */
if ((ccb_h->flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
if ((ccb_h->flags & CAM_SCATTER_VALID) == 0) {
/* We've been given a pointer to a single buffer */
if ((ccb_h->flags & CAM_DATA_PHYS) == 0) {
int s;
int error;
s = splsoftvm();
error = bus_dmamap_load(ahd->buffer_dmat,
scb->dmamap,
csio->data_ptr,
csio->dxfer_len,
ahd_execute_scb,
scb, /*flags*/0);
if (error == EINPROGRESS) {
/*
* So as to maintain ordering,
* freeze the controller queue
* until our mapping is
* returned.
*/
xpt_freeze_simq(sim,
/*count*/1);
scb->io_ctx->ccb_h.status |=
CAM_RELEASE_SIMQ;
}
splx(s);
} else {
struct bus_dma_segment seg;
/* Pointer to physical buffer */
if (csio->dxfer_len > AHD_MAXTRANSFER_SIZE)
panic("ahd_setup_data - Transfer size "
"larger than can device max");
seg.ds_addr =
(bus_addr_t)(vm_offset_t)csio->data_ptr;
seg.ds_len = csio->dxfer_len;
ahd_execute_scb(scb, &seg, 1, 0);
}
} else {
struct bus_dma_segment *segs;
if ((ccb_h->flags & CAM_DATA_PHYS) != 0)
panic("ahd_setup_data - Physical segment "
"pointers unsupported");
if ((ccb_h->flags & CAM_SG_LIST_PHYS) == 0)
panic("ahd_setup_data - Virtual segment "
"addresses unsupported");
/* Just use the segments provided */
segs = (struct bus_dma_segment *)csio->data_ptr;
ahd_execute_scb(scb, segs, csio->sglist_cnt, 0);
}
} else {
ahd_execute_scb(scb, NULL, 0, 0);
}
}
static void
ahd_abort_ccb(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb)
{
union ccb *abort_ccb;
abort_ccb = ccb->cab.abort_ccb;
switch (abort_ccb->ccb_h.func_code) {
#ifdef AHD_TARGET_MODE
case XPT_ACCEPT_TARGET_IO:
case XPT_IMMED_NOTIFY:
case XPT_CONT_TARGET_IO:
{
struct ahd_tmode_tstate *tstate;
struct ahd_tmode_lstate *lstate;
struct ccb_hdr_slist *list;
cam_status status;
status = ahd_find_tmode_devs(ahd, sim, abort_ccb, &tstate,
&lstate, TRUE);
if (status != CAM_REQ_CMP) {
ccb->ccb_h.status = status;
break;
}
if (abort_ccb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO)
list = &lstate->accept_tios;
else if (abort_ccb->ccb_h.func_code == XPT_IMMED_NOTIFY)
list = &lstate->immed_notifies;
else
list = NULL;
if (list != NULL) {
struct ccb_hdr *curelm;
int found;
curelm = SLIST_FIRST(list);
found = 0;
if (curelm == &abort_ccb->ccb_h) {
found = 1;
SLIST_REMOVE_HEAD(list, sim_links.sle);
} else {
while(curelm != NULL) {
struct ccb_hdr *nextelm;
nextelm =
SLIST_NEXT(curelm, sim_links.sle);
if (nextelm == &abort_ccb->ccb_h) {
found = 1;
SLIST_NEXT(curelm,
sim_links.sle) =
SLIST_NEXT(nextelm,
sim_links.sle);
break;
}
curelm = nextelm;
}
}
if (found) {
abort_ccb->ccb_h.status = CAM_REQ_ABORTED;
xpt_done(abort_ccb);
ccb->ccb_h.status = CAM_REQ_CMP;
} else {
xpt_print_path(abort_ccb->ccb_h.path);
printf("Not found\n");
ccb->ccb_h.status = CAM_PATH_INVALID;
}
break;
}
/* FALLTHROUGH */
}
#endif
case XPT_SCSI_IO:
/* XXX Fully implement the hard ones */
ccb->ccb_h.status = CAM_UA_ABORT;
break;
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
}
xpt_done(ccb);
}
void
ahd_send_async(struct ahd_softc *ahd, char channel, u_int target,
u_int lun, ac_code code, void *opt_arg)
{
struct ccb_trans_settings cts;
struct cam_path *path;
void *arg;
int error;
arg = NULL;
error = ahd_create_path(ahd, channel, target, lun, &path);
if (error != CAM_REQ_CMP)
return;
switch (code) {
case AC_TRANSFER_NEG:
{
#ifdef AHD_NEW_TRAN_SETTINGS
struct ccb_trans_settings_scsi *scsi;
cts.type = CTS_TYPE_CURRENT_SETTINGS;
scsi = &cts.proto_specific.scsi;
#else
cts.flags = CCB_TRANS_CURRENT_SETTINGS;
#endif
cts.ccb_h.path = path;
cts.ccb_h.target_id = target;
cts.ccb_h.target_lun = lun;
ahd_get_tran_settings(ahd, ahd->our_id, channel, &cts);
arg = &cts;
#ifdef AHD_NEW_TRAN_SETTINGS
scsi->valid &= ~CTS_SCSI_VALID_TQ;
scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
#else
cts.valid &= ~CCB_TRANS_TQ_VALID;
cts.flags &= ~CCB_TRANS_TAG_ENB;
#endif
if (opt_arg == NULL)
break;
if (*((ahd_queue_alg *)opt_arg) == AHD_QUEUE_TAGGED)
#ifdef AHD_NEW_TRAN_SETTINGS
scsi->flags |= ~CTS_SCSI_FLAGS_TAG_ENB;
scsi->valid |= CTS_SCSI_VALID_TQ;
#else
cts.flags |= CCB_TRANS_TAG_ENB;
cts.valid |= CCB_TRANS_TQ_VALID;
#endif
break;
}
case AC_SENT_BDR:
case AC_BUS_RESET:
break;
default:
panic("ahd_send_async: Unexpected async event");
}
xpt_async(code, path, arg);
xpt_free_path(path);
}
void
ahd_platform_set_tags(struct ahd_softc *ahd,
struct ahd_devinfo *devinfo, int enable)
{
}
int
ahd_platform_alloc(struct ahd_softc *ahd, void *platform_arg)
{
ahd->platform_data = malloc(sizeof(struct ahd_platform_data), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (ahd->platform_data == NULL)
return (ENOMEM);
return (0);
}
void
ahd_platform_free(struct ahd_softc *ahd)
{
struct ahd_platform_data *pdata;
pdata = ahd->platform_data;
if (pdata != NULL) {
if (pdata->regs[0] != NULL)
bus_release_resource(ahd->dev_softc,
pdata->regs_res_type[0],
pdata->regs_res_id[0],
pdata->regs[0]);
if (pdata->regs[1] != NULL)
bus_release_resource(ahd->dev_softc,
pdata->regs_res_type[1],
pdata->regs_res_id[1],
pdata->regs[1]);
if (pdata->irq != NULL)
bus_release_resource(ahd->dev_softc,
pdata->irq_res_type,
0, pdata->irq);
if (pdata->sim != NULL) {
xpt_async(AC_LOST_DEVICE, pdata->path, NULL);
xpt_free_path(pdata->path);
xpt_bus_deregister(cam_sim_path(pdata->sim));
cam_sim_free(pdata->sim, /*free_devq*/TRUE);
}
if (pdata->eh != NULL)
EVENTHANDLER_DEREGISTER(shutdown_final, pdata->eh);
free(ahd->platform_data, M_DEVBUF);
}
}
int
ahd_softc_comp(struct ahd_softc *lahd, struct ahd_softc *rahd)
{
/* We don't sort softcs under FreeBSD so report equal always */
return (0);
}
int
ahd_detach(device_t dev)
{
struct ahd_softc *ahd;
u_long l;
u_long s;
ahd_list_lock(&l);
device_printf(dev, "detaching device\n");
ahd = device_get_softc(dev);
ahd = ahd_find_softc(ahd);
if (ahd == NULL) {
device_printf(dev, "aic7xxx already detached\n");
ahd_list_unlock(&l);
return (ENOENT);
}
TAILQ_REMOVE(&ahd_tailq, ahd, links);
ahd_list_unlock(&l);
ahd_lock(ahd, &s);
ahd_intr_enable(ahd, FALSE);
bus_teardown_intr(dev, ahd->platform_data->irq, ahd->platform_data->ih);
ahd_unlock(ahd, &s);
ahd_free(ahd);
return (0);
}
#if UNUSED
static void
ahd_dump_targcmd(struct target_cmd *cmd)
{
uint8_t *byte;
uint8_t *last_byte;
int i;
byte = &cmd->initiator_channel;
/* Debugging info for received commands */
last_byte = &cmd[1].initiator_channel;
i = 0;
while (byte < last_byte) {
if (i == 0)
printf("\t");
printf("%#x", *byte++);
i++;
if (i == 8) {
printf("\n");
i = 0;
} else {
printf(", ");
}
}
}
#endif
static int
ahd_modevent(module_t mod, int type, void *data)
{
/* XXX Deal with busy status on unload. */
return 0;
}
static moduledata_t ahd_mod = {
"ahd",
ahd_modevent,
NULL
};
/********************************** DDB Hooks *********************************/
#ifdef DDB
static struct ahd_softc *ahd_ddb_softc;
static int ahd_ddb_paused;
static int ahd_ddb_paused_on_entry;
DB_COMMAND(ahd_set_unit, ahd_ddb_set_unit)
{
struct ahd_softc *list_ahd;
ahd_ddb_softc = NULL;
TAILQ_FOREACH(list_ahd, &ahd_tailq, links) {
if (list_ahd->unit == addr)
ahd_ddb_softc = list_ahd;
}
if (ahd_ddb_softc == NULL)
db_error("No matching softc found!\n");
}
DB_COMMAND(ahd_pause, ahd_ddb_pause)
{
if (ahd_ddb_softc == NULL) {
db_error("Must set unit with ahd_set_unit first!\n");
return;
}
if (ahd_ddb_paused == 0) {
ahd_ddb_paused++;
if (ahd_is_paused(ahd_ddb_softc)) {
ahd_ddb_paused_on_entry++;
return;
}
ahd_pause(ahd_ddb_softc);
}
}
DB_COMMAND(ahd_unpause, ahd_ddb_unpause)
{
if (ahd_ddb_softc == NULL) {
db_error("Must set unit with ahd_set_unit first!\n");
return;
}
if (ahd_ddb_paused != 0) {
ahd_ddb_paused = 0;
if (ahd_ddb_paused_on_entry)
return;
ahd_unpause(ahd_ddb_softc);
} else if (ahd_ddb_paused_on_entry != 0) {
/* Two unpauses to clear a paused on entry. */
ahd_ddb_paused_on_entry = 0;
ahd_unpause(ahd_ddb_softc);
}
}
DB_COMMAND(ahd_in, ahd_ddb_in)
{
int c;
int size;
if (ahd_ddb_softc == NULL) {
db_error("Must set unit with ahd_set_unit first!\n");
return;
}
if (have_addr == 0)
return;
size = 1;
while ((c = *modif++) != '\0') {
switch (c) {
case 'b':
size = 1;
break;
case 'w':
size = 2;
break;
case 'l':
size = 4;
break;
}
}
if (count <= 0)
count = 1;
while (--count >= 0) {
db_printf("%04lx (M)%x: \t", (u_long)addr,
ahd_inb(ahd_ddb_softc, MODE_PTR));
switch (size) {
case 1:
db_printf("%02x\n", ahd_inb(ahd_ddb_softc, addr));
break;
case 2:
db_printf("%04x\n", ahd_inw(ahd_ddb_softc, addr));
break;
case 4:
db_printf("%08x\n", ahd_inl(ahd_ddb_softc, addr));
break;
}
}
}
DB_SET(ahd_out, ahd_ddb_out, db_cmd_set, CS_MORE, NULL)
{
db_expr_t old_value;
db_expr_t new_value;
int size;
if (ahd_ddb_softc == NULL) {
db_error("Must set unit with ahd_set_unit first!\n");
return;
}
switch (modif[0]) {
case '\0':
case 'b':
size = 1;
break;
case 'h':
size = 2;
break;
case 'l':
size = 4;
break;
default:
db_error("Unknown size\n");
return;
}
while (db_expression(&new_value)) {
switch (size) {
default:
case 1:
old_value = ahd_inb(ahd_ddb_softc, addr);
ahd_outb(ahd_ddb_softc, addr, new_value);
break;
case 2:
old_value = ahd_inw(ahd_ddb_softc, addr);
ahd_outw(ahd_ddb_softc, addr, new_value);
break;
case 4:
old_value = ahd_inl(ahd_ddb_softc, addr);
ahd_outl(ahd_ddb_softc, addr, new_value);
break;
}
db_printf("%04lx (M)%x: \t0x%lx\t=\t0x%lx",
(u_long)addr, ahd_inb(ahd_ddb_softc, MODE_PTR),
(u_long)old_value, (u_long)new_value);
addr += size;
}
db_skip_to_eol();
}
#endif
DECLARE_MODULE(ahd, ahd_mod, SI_SUB_DRIVERS, SI_ORDER_MIDDLE);
MODULE_DEPEND(ahd, cam, 1, 1, 1);
MODULE_VERSION(ahd, 1);
Reference in New Issue View Git Blame Copy Permalink