d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3d96cd7873
freebsd-nq/sys/dev/mpr/mprvar.h
Kenneth D. Merry 6d4ffcb4ac Changes to make mps(4) and mpr(4) handle reinit with reallocation. 
When the mps(4) and mpr(4) drivers need to reinitialize the
firmware, they sometimes need to reallocate all of the memory
allocated by the driver.  The reallocation happens whenever the IOC
Facts change.  That should only happen after a firmware upgrade.

If the reinitialization happens as a result of a timed out command
sent to the card, the command that timed out and triggered the
reinit may have been freed if iocfacts_allocate() reallocated all
memory.  If the caller attempts to access the command after that,
the kernel will panic because the caller will be dereferencing
freed memory.

The solution is to set a flag in the softc when we reallocate,
and avoid dereferencing the command strucure if we've reallocated.

The changes are largely the same in both drivers, since mpr(4) is a
derivative of mps(4).

 o In iocfacts_allocate(), if the IOC Facts have changed and we
   need to reallocate, set the REALLOCATED flag in the softc.

 o Change wait_command() to take a struct mps_command ** instead of
   a struct mps_command *.  This allows us to NULL out the caller's
   command pointer if we have to reinit the controller and the data
   structures get reallocated.  (The REALLOCATED flag will be set
   in the softc if that has happened.)

 o In every place that calls wait_command(), make sure we handle
   the case where the command is NULL after the call.

 o The mpr(4) driver has mpr_request_polled() which can also
   reinitialize the card.  Also check for reallocation there.

Reviewed by:	scottl, slm
MFC after:	1 week
Sponsored by:	Spectra Logic
2017-08-10 14:59:17 +00:00

891 lines
27 KiB
C
Raw Blame History

/*-
* Copyright (c) 2009 Yahoo! Inc.
* Copyright (c) 2011-2015 LSI Corp.
* Copyright (c) 2013-2016 Avago Technologies
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
*
* $FreeBSD$
*/
#ifndef _MPRVAR_H
#define _MPRVAR_H
#define MPR_DRIVER_VERSION "15.03.00.00-fbsd"
#define MPR_DB_MAX_WAIT 2500
#define MPR_REQ_FRAMES 1024
#define MPR_EVT_REPLY_FRAMES 32
#define MPR_REPLY_FRAMES MPR_REQ_FRAMES
#define MPR_CHAIN_FRAMES 2048
#define MPR_MAXIO_PAGES (-1)
#define MPR_SENSE_LEN SSD_FULL_SIZE
#define MPR_MSI_COUNT 1
#define MPR_SGE64_SIZE 12
#define MPR_SGE32_SIZE 8
#define MPR_SGC_SIZE 8
#define MPR_DEFAULT_CHAIN_SEG_SIZE 8
#define MPR_MAX_CHAIN_ELEMENT_SIZE 16
/*
* PCIe NVMe Specific defines
*/
//SLM-for now just use the same value as a SAS disk
#define NVME_QDEPTH MPR_REQ_FRAMES
#define PRP_ENTRY_SIZE 8
#define NVME_CMD_PRP1_OFFSET 24 /* PRP1 offset in NVMe cmd */
#define NVME_CMD_PRP2_OFFSET 32 /* PRP2 offset in NVMe cmd */
#define NVME_ERROR_RESPONSE_SIZE 16 /* Max NVME Error Response */
#define HOST_PAGE_SIZE_4K 12
#define MPR_FUNCTRACE(sc) \
mpr_dprint((sc), MPR_TRACE, "%s\n", __func__)
#define CAN_SLEEP 1
#define NO_SLEEP 0
#define MPR_PERIODIC_DELAY 1 /* 1 second heartbeat/watchdog check */
#define MPR_ATA_ID_TIMEOUT 5 /* 5 second timeout for SATA ID cmd */
#define MPR_MISSING_CHECK_DELAY 10 /* 10 seconds between missing check */
#define IFAULT_IOP_OVER_TEMP_THRESHOLD_EXCEEDED 0x2810
#define MPR_SCSI_RI_INVALID_FRAME (0x00000002)
#define MPR_STRING_LENGTH 64
#define DEFAULT_SPINUP_WAIT 3 /* seconds to wait for spinup */
#include <sys/endian.h>
/*
* host mapping related macro definitions
*/
#define MPR_MAPTABLE_BAD_IDX 0xFFFFFFFF
#define MPR_DPM_BAD_IDX 0xFFFF
#define MPR_ENCTABLE_BAD_IDX 0xFF
#define MPR_MAX_MISSING_COUNT 0x0F
#define MPR_DEV_RESERVED 0x20000000
#define MPR_MAP_IN_USE 0x10000000
#define MPR_MAP_BAD_ID 0xFFFFFFFF
typedef uint8_t u8;
typedef uint16_t u16;
typedef uint32_t u32;
typedef uint64_t u64;
/**
* struct dev_mapping_table - device mapping information
* @physical_id: SAS address for drives or WWID for RAID volumes
* @device_info: bitfield provides detailed info about the device
* @phy_bits: bitfields indicating controller phys
* @dpm_entry_num: index of this device in device persistent map table
* @dev_handle: device handle for the device pointed by this entry
* @id: target id
* @missing_count: number of times the device not detected by driver
* @hide_flag: Hide this physical disk/not (foreign configuration)
* @init_complete: Whether the start of the day checks completed or not
* @TLR_bits: Turn TLR support on or off
*/
struct dev_mapping_table {
u64 physical_id;
u32 device_info;
u32 phy_bits;
u16 dpm_entry_num;
u16 dev_handle;
u16 reserved1;
u16 id;
u8 missing_count;
u8 init_complete;
u8 TLR_bits;
u8 reserved2;
};
/**
* struct enc_mapping_table - mapping information about an enclosure
* @enclosure_id: Logical ID of this enclosure
* @start_index: index to the entry in dev_mapping_table
* @phy_bits: bitfields indicating controller phys
* @dpm_entry_num: index of this enclosure in device persistent map table
* @enc_handle: device handle for the enclosure pointed by this entry
* @num_slots: number of slots in the enclosure
* @start_slot: Starting slot id
* @missing_count: number of times the device not detected by driver
* @removal_flag: used to mark the device for removal
* @skip_search: used as a flag to include/exclude enclosure for search
* @init_complete: Whether the start of the day checks completed or not
*/
struct enc_mapping_table {
u64 enclosure_id;
u32 start_index;
u32 phy_bits;
u16 dpm_entry_num;
u16 enc_handle;
u16 num_slots;
u16 start_slot;
u8 missing_count;
u8 removal_flag;
u8 skip_search;
u8 init_complete;
};
/**
* struct map_removal_table - entries to be removed from mapping table
* @dpm_entry_num: index of this device in device persistent map table
* @dev_handle: device handle for the device pointed by this entry
*/
struct map_removal_table{
u16 dpm_entry_num;
u16 dev_handle;
};
typedef struct mpr_fw_diagnostic_buffer {
size_t size;
uint8_t extended_type;
uint8_t buffer_type;
uint8_t force_release;
uint32_t product_specific[23];
uint8_t immediate;
uint8_t enabled;
uint8_t valid_data;
uint8_t owned_by_firmware;
uint32_t unique_id;
} mpr_fw_diagnostic_buffer_t;
struct mpr_softc;
struct mpr_command;
struct mprsas_softc;
union ccb;
struct mprsas_target;
struct mpr_column_map;
MALLOC_DECLARE(M_MPR);
typedef void mpr_evt_callback_t(struct mpr_softc *, uintptr_t,
MPI2_EVENT_NOTIFICATION_REPLY *reply);
typedef void mpr_command_callback_t(struct mpr_softc *, struct mpr_command *cm);
struct mpr_chain {
TAILQ_ENTRY(mpr_chain) chain_link;
void *chain;
uint64_t chain_busaddr;
};
struct mpr_prp_page {
TAILQ_ENTRY(mpr_prp_page) prp_page_link;
uint64_t *prp_page;
uint64_t prp_page_busaddr;
};
/*
* This needs to be at least 2 to support SMP passthrough.
*/
#define MPR_IOVEC_COUNT 2
struct mpr_command {
TAILQ_ENTRY(mpr_command) cm_link;
TAILQ_ENTRY(mpr_command) cm_recovery;
struct mpr_softc *cm_sc;
union ccb *cm_ccb;
void *cm_data;
u_int cm_length;
u_int cm_out_len;
struct uio cm_uio;
struct iovec cm_iovec[MPR_IOVEC_COUNT];
u_int cm_max_segs;
u_int cm_sglsize;
void *cm_sge;
uint8_t *cm_req;
uint8_t *cm_reply;
uint32_t cm_reply_data;
mpr_command_callback_t *cm_complete;
void *cm_complete_data;
struct mprsas_target *cm_targ;
MPI2_REQUEST_DESCRIPTOR_UNION cm_desc;
u_int cm_lun;
u_int cm_flags;
#define MPR_CM_FLAGS_POLLED (1 << 0)
#define MPR_CM_FLAGS_COMPLETE (1 << 1)
#define MPR_CM_FLAGS_SGE_SIMPLE (1 << 2)
#define MPR_CM_FLAGS_DATAOUT (1 << 3)
#define MPR_CM_FLAGS_DATAIN (1 << 4)
#define MPR_CM_FLAGS_WAKEUP (1 << 5)
#define MPR_CM_FLAGS_USE_UIO (1 << 6)
#define MPR_CM_FLAGS_SMP_PASS (1 << 7)
#define MPR_CM_FLAGS_CHAIN_FAILED (1 << 8)
#define MPR_CM_FLAGS_ERROR_MASK MPR_CM_FLAGS_CHAIN_FAILED
#define MPR_CM_FLAGS_USE_CCB (1 << 9)
#define MPR_CM_FLAGS_SATA_ID_TIMEOUT (1 << 10)
u_int cm_state;
#define MPR_CM_STATE_FREE 0
#define MPR_CM_STATE_BUSY 1
#define MPR_CM_STATE_TIMEDOUT 2
bus_dmamap_t cm_dmamap;
struct scsi_sense_data *cm_sense;
uint64_t *nvme_error_response;
TAILQ_HEAD(, mpr_chain) cm_chain_list;
TAILQ_HEAD(, mpr_prp_page) cm_prp_page_list;
uint32_t cm_req_busaddr;
bus_addr_t cm_sense_busaddr;
struct callout cm_callout;
};
struct mpr_column_map {
uint16_t dev_handle;
uint8_t phys_disk_num;
};
struct mpr_event_handle {
TAILQ_ENTRY(mpr_event_handle) eh_list;
mpr_evt_callback_t *callback;
void *data;
uint8_t mask[16];
};
struct mpr_softc {
device_t mpr_dev;
struct cdev *mpr_cdev;
u_int mpr_flags;
#define MPR_FLAGS_INTX (1 << 0)
#define MPR_FLAGS_MSI (1 << 1)
#define MPR_FLAGS_BUSY (1 << 2)
#define MPR_FLAGS_SHUTDOWN (1 << 3)
#define MPR_FLAGS_DIAGRESET (1 << 4)
#define MPR_FLAGS_ATTACH_DONE (1 << 5)
#define MPR_FLAGS_GEN35_IOC (1 << 6)
#define MPR_FLAGS_REALLOCATED (1 << 7)
u_int mpr_debug;
u_int disable_msix;
u_int disable_msi;
int msi_msgs;
u_int atomic_desc_capable;
int tm_cmds_active;
int io_cmds_active;
int io_cmds_highwater;
int chain_free;
int max_chains;
int max_io_pages;
u_int maxio;
int chain_free_lowwater;
uint32_t chain_frame_size;
uint16_t chain_seg_size;
int prp_buffer_size;
int prp_pages_free;
int prp_pages_free_lowwater;
u_int enable_ssu;
int spinup_wait_time;
int use_phynum;
uint64_t chain_alloc_fail;
uint64_t prp_page_alloc_fail;
struct sysctl_ctx_list sysctl_ctx;
struct sysctl_oid *sysctl_tree;
char fw_version[16];
struct mpr_command *commands;
struct mpr_chain *chains;
struct mpr_prp_page *prps;
struct callout periodic;
struct callout device_check_callout;
struct mprsas_softc *sassc;
char tmp_string[MPR_STRING_LENGTH];
TAILQ_HEAD(, mpr_command) req_list;
TAILQ_HEAD(, mpr_command) high_priority_req_list;
TAILQ_HEAD(, mpr_chain) chain_list;
TAILQ_HEAD(, mpr_prp_page) prp_page_list;
TAILQ_HEAD(, mpr_command) tm_list;
int replypostindex;
int replyfreeindex;
struct resource *mpr_regs_resource;
bus_space_handle_t mpr_bhandle;
bus_space_tag_t mpr_btag;
int mpr_regs_rid;
bus_dma_tag_t mpr_parent_dmat;
bus_dma_tag_t buffer_dmat;
MPI2_IOC_FACTS_REPLY *facts;
int num_reqs;
int num_replies;
int fqdepth; /* Free queue */
int pqdepth; /* Post queue */
uint8_t event_mask[16];
TAILQ_HEAD(, mpr_event_handle) event_list;
struct mpr_event_handle *mpr_log_eh;
struct mtx mpr_mtx;
struct intr_config_hook mpr_ich;
struct resource *mpr_irq[MPR_MSI_COUNT];
void *mpr_intrhand[MPR_MSI_COUNT];
int mpr_irq_rid[MPR_MSI_COUNT];
uint8_t *req_frames;
bus_addr_t req_busaddr;
bus_dma_tag_t req_dmat;
bus_dmamap_t req_map;
uint8_t *reply_frames;
bus_addr_t reply_busaddr;
bus_dma_tag_t reply_dmat;
bus_dmamap_t reply_map;
struct scsi_sense_data *sense_frames;
bus_addr_t sense_busaddr;
bus_dma_tag_t sense_dmat;
bus_dmamap_t sense_map;
uint8_t *chain_frames;
bus_addr_t chain_busaddr;
bus_dma_tag_t chain_dmat;
bus_dmamap_t chain_map;
uint8_t *prp_pages;
bus_addr_t prp_page_busaddr;
bus_dma_tag_t prp_page_dmat;
bus_dmamap_t prp_page_map;
MPI2_REPLY_DESCRIPTORS_UNION *post_queue;
bus_addr_t post_busaddr;
uint32_t *free_queue;
bus_addr_t free_busaddr;
bus_dma_tag_t queues_dmat;
bus_dmamap_t queues_map;
uint8_t *fw_diag_buffer;
bus_addr_t fw_diag_busaddr;
bus_dma_tag_t fw_diag_dmat;
bus_dmamap_t fw_diag_map;
uint8_t ir_firmware;
/* static config pages */
Mpi2IOCPage8_t ioc_pg8;
Mpi2IOUnitPage8_t iounit_pg8;
/* host mapping support */
struct dev_mapping_table *mapping_table;
struct enc_mapping_table *enclosure_table;
struct map_removal_table *removal_table;
uint8_t *dpm_entry_used;
uint8_t *dpm_flush_entry;
Mpi2DriverMappingPage0_t *dpm_pg0;
uint16_t max_devices;
uint16_t max_enclosures;
uint16_t max_expanders;
uint8_t max_volumes;
uint8_t num_enc_table_entries;
uint8_t num_rsvd_entries;
uint16_t max_dpm_entries;
uint8_t is_dpm_enable;
uint8_t track_mapping_events;
uint32_t pending_map_events;
/* FW diag Buffer List */
mpr_fw_diagnostic_buffer_t
fw_diag_buffer_list[MPI2_DIAG_BUF_TYPE_COUNT];
/* Event Recording IOCTL support */
uint32_t events_to_record[4];
mpr_event_entry_t recorded_events[MPR_EVENT_QUEUE_SIZE];
uint8_t event_index;
uint32_t event_number;
/* EEDP and TLR support */
uint8_t eedp_enabled;
uint8_t control_TLR;
/* Shutdown Event Handler */
eventhandler_tag shutdown_eh;
/* To track topo events during reset */
#define MPR_DIAG_RESET_TIMEOUT 300000
uint8_t wait_for_port_enable;
uint8_t port_enable_complete;
uint8_t msleep_fake_chan;
/* StartStopUnit command handling at shutdown */
uint32_t SSU_refcount;
uint8_t SSU_started;
char exclude_ids[80];
struct timeval lastfail;
};
struct mpr_config_params {
MPI2_CONFIG_EXT_PAGE_HEADER_UNION hdr;
u_int action;
u_int page_address; /* Attributes, not a phys address */
u_int status;
void *buffer;
u_int length;
int timeout;
void (*callback)(struct mpr_softc *, struct mpr_config_params *);
void *cbdata;
};
struct scsi_read_capacity_eedp
{
uint8_t addr[8];
uint8_t length[4];
uint8_t protect;
};
static __inline uint32_t
mpr_regread(struct mpr_softc *sc, uint32_t offset)
{
return (bus_space_read_4(sc->mpr_btag, sc->mpr_bhandle, offset));
}
static __inline void
mpr_regwrite(struct mpr_softc *sc, uint32_t offset, uint32_t val)
{
bus_space_write_4(sc->mpr_btag, sc->mpr_bhandle, offset, val);
}
/* free_queue must have Little Endian address
* TODO- cm_reply_data is unwanted. We can remove it.
* */
static __inline void
mpr_free_reply(struct mpr_softc *sc, uint32_t busaddr)
{
if (++sc->replyfreeindex >= sc->fqdepth)
sc->replyfreeindex = 0;
sc->free_queue[sc->replyfreeindex] = htole32(busaddr);
mpr_regwrite(sc, MPI2_REPLY_FREE_HOST_INDEX_OFFSET, sc->replyfreeindex);
}
static __inline struct mpr_chain *
mpr_alloc_chain(struct mpr_softc *sc)
{
struct mpr_chain *chain;
if ((chain = TAILQ_FIRST(&sc->chain_list)) != NULL) {
TAILQ_REMOVE(&sc->chain_list, chain, chain_link);
sc->chain_free--;
if (sc->chain_free < sc->chain_free_lowwater)
sc->chain_free_lowwater = sc->chain_free;
} else
sc->chain_alloc_fail++;
return (chain);
}
static __inline void
mpr_free_chain(struct mpr_softc *sc, struct mpr_chain *chain)
{
#if 0
bzero(chain->chain, 128);
#endif
sc->chain_free++;
TAILQ_INSERT_TAIL(&sc->chain_list, chain, chain_link);
}
static __inline struct mpr_prp_page *
mpr_alloc_prp_page(struct mpr_softc *sc)
{
struct mpr_prp_page *prp_page;
if ((prp_page = TAILQ_FIRST(&sc->prp_page_list)) != NULL) {
TAILQ_REMOVE(&sc->prp_page_list, prp_page, prp_page_link);
sc->prp_pages_free--;
if (sc->prp_pages_free < sc->prp_pages_free_lowwater)
sc->prp_pages_free_lowwater = sc->prp_pages_free;
} else
sc->prp_page_alloc_fail++;
return (prp_page);
}
static __inline void
mpr_free_prp_page(struct mpr_softc *sc, struct mpr_prp_page *prp_page)
{
sc->prp_pages_free++;
TAILQ_INSERT_TAIL(&sc->prp_page_list, prp_page, prp_page_link);
}
static __inline void
mpr_free_command(struct mpr_softc *sc, struct mpr_command *cm)
{
struct mpr_chain *chain, *chain_temp;
struct mpr_prp_page *prp_page, *prp_page_temp;
if (cm->cm_reply != NULL)
mpr_free_reply(sc, cm->cm_reply_data);
cm->cm_reply = NULL;
cm->cm_flags = 0;
cm->cm_complete = NULL;
cm->cm_complete_data = NULL;
cm->cm_ccb = NULL;
cm->cm_targ = NULL;
cm->cm_max_segs = 0;
cm->cm_lun = 0;
cm->cm_state = MPR_CM_STATE_FREE;
cm->cm_data = NULL;
cm->cm_length = 0;
cm->cm_out_len = 0;
cm->cm_sglsize = 0;
cm->cm_sge = NULL;
TAILQ_FOREACH_SAFE(chain, &cm->cm_chain_list, chain_link, chain_temp) {
TAILQ_REMOVE(&cm->cm_chain_list, chain, chain_link);
mpr_free_chain(sc, chain);
}
TAILQ_FOREACH_SAFE(prp_page, &cm->cm_prp_page_list, prp_page_link,
prp_page_temp) {
TAILQ_REMOVE(&cm->cm_prp_page_list, prp_page, prp_page_link);
mpr_free_prp_page(sc, prp_page);
}
TAILQ_INSERT_TAIL(&sc->req_list, cm, cm_link);
}
static __inline struct mpr_command *
mpr_alloc_command(struct mpr_softc *sc)
{
struct mpr_command *cm;
cm = TAILQ_FIRST(&sc->req_list);
if (cm == NULL)
return (NULL);
TAILQ_REMOVE(&sc->req_list, cm, cm_link);
KASSERT(cm->cm_state == MPR_CM_STATE_FREE, ("mpr: Allocating busy "
"command\n"));
cm->cm_state = MPR_CM_STATE_BUSY;
return (cm);
}
static __inline void
mpr_free_high_priority_command(struct mpr_softc *sc, struct mpr_command *cm)
{
struct mpr_chain *chain, *chain_temp;
if (cm->cm_reply != NULL)
mpr_free_reply(sc, cm->cm_reply_data);
cm->cm_reply = NULL;
cm->cm_flags = 0;
cm->cm_complete = NULL;
cm->cm_complete_data = NULL;
cm->cm_ccb = NULL;
cm->cm_targ = NULL;
cm->cm_lun = 0;
cm->cm_state = MPR_CM_STATE_FREE;
TAILQ_FOREACH_SAFE(chain, &cm->cm_chain_list, chain_link, chain_temp) {
TAILQ_REMOVE(&cm->cm_chain_list, chain, chain_link);
mpr_free_chain(sc, chain);
}
TAILQ_INSERT_TAIL(&sc->high_priority_req_list, cm, cm_link);
}
static __inline struct mpr_command *
mpr_alloc_high_priority_command(struct mpr_softc *sc)
{
struct mpr_command *cm;
cm = TAILQ_FIRST(&sc->high_priority_req_list);
if (cm == NULL)
return (NULL);
TAILQ_REMOVE(&sc->high_priority_req_list, cm, cm_link);
KASSERT(cm->cm_state == MPR_CM_STATE_FREE, ("mpr: Allocating busy "
"command\n"));
cm->cm_state = MPR_CM_STATE_BUSY;
return (cm);
}
static __inline void
mpr_lock(struct mpr_softc *sc)
{
mtx_lock(&sc->mpr_mtx);
}
static __inline void
mpr_unlock(struct mpr_softc *sc)
{
mtx_unlock(&sc->mpr_mtx);
}
#define MPR_INFO (1 << 0) /* Basic info */
#define MPR_FAULT (1 << 1) /* Hardware faults */
#define MPR_EVENT (1 << 2) /* Event data from the controller */
#define MPR_LOG (1 << 3) /* Log data from the controller */
#define MPR_RECOVERY (1 << 4) /* Command error recovery tracing */
#define MPR_ERROR (1 << 5) /* Parameter errors, programming bugs */
#define MPR_INIT (1 << 6) /* Things related to system init */
#define MPR_XINFO (1 << 7) /* More detailed/noisy info */
#define MPR_USER (1 << 8) /* Trace user-generated commands */
#define MPR_MAPPING (1 << 9) /* Trace device mappings */
#define MPR_TRACE (1 << 10) /* Function-by-function trace */
#define MPR_SSU_DISABLE_SSD_DISABLE_HDD 0
#define MPR_SSU_ENABLE_SSD_DISABLE_HDD 1
#define MPR_SSU_DISABLE_SSD_ENABLE_HDD 2
#define MPR_SSU_ENABLE_SSD_ENABLE_HDD 3
#define mpr_printf(sc, args...) \
device_printf((sc)->mpr_dev, ##args)
#define mpr_print_field(sc, msg, args...) \
printf("\t" msg, ##args)
#define mpr_vprintf(sc, args...) \
do { \
if (bootverbose) \
mpr_printf(sc, ##args); \
} while (0)
#define mpr_dprint(sc, level, msg, args...) \
do { \
if ((sc)->mpr_debug & (level)) \
device_printf((sc)->mpr_dev, msg, ##args); \
} while (0)
#define MPR_PRINTFIELD_START(sc, tag...) \
mpr_printf((sc), ##tag); \
mpr_print_field((sc), ":\n")
#define MPR_PRINTFIELD_END(sc, tag) \
mpr_printf((sc), tag "\n")
#define MPR_PRINTFIELD(sc, facts, attr, fmt) \
mpr_print_field((sc), #attr ": " #fmt "\n", (facts)->attr)
static __inline void
mpr_from_u64(uint64_t data, U64 *mpr)
{
(mpr)->High = htole32((uint32_t)((data) >> 32));
(mpr)->Low = htole32((uint32_t)((data) & 0xffffffff));
}
static __inline uint64_t
mpr_to_u64(U64 *data)
{
return (((uint64_t)le32toh(data->High) << 32) | le32toh(data->Low));
}
static __inline void
mpr_mask_intr(struct mpr_softc *sc)
{
uint32_t mask;
mask = mpr_regread(sc, MPI2_HOST_INTERRUPT_MASK_OFFSET);
mask |= MPI2_HIM_REPLY_INT_MASK;
mpr_regwrite(sc, MPI2_HOST_INTERRUPT_MASK_OFFSET, mask);
}
static __inline void
mpr_unmask_intr(struct mpr_softc *sc)
{
uint32_t mask;
mask = mpr_regread(sc, MPI2_HOST_INTERRUPT_MASK_OFFSET);
mask &= ~MPI2_HIM_REPLY_INT_MASK;
mpr_regwrite(sc, MPI2_HOST_INTERRUPT_MASK_OFFSET, mask);
}
int mpr_pci_setup_interrupts(struct mpr_softc *sc);
int mpr_pci_restore(struct mpr_softc *sc);
void mpr_get_tunables(struct mpr_softc *sc);
int mpr_attach(struct mpr_softc *sc);
int mpr_free(struct mpr_softc *sc);
void mpr_intr(void *);
void mpr_intr_msi(void *);
void mpr_intr_locked(void *);
int mpr_register_events(struct mpr_softc *, uint8_t *, mpr_evt_callback_t *,
void *, struct mpr_event_handle **);
int mpr_restart(struct mpr_softc *);
int mpr_update_events(struct mpr_softc *, struct mpr_event_handle *, uint8_t *);
int mpr_deregister_events(struct mpr_softc *, struct mpr_event_handle *);
void mpr_build_nvme_prp(struct mpr_softc *sc, struct mpr_command *cm,
Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request, void *data,
uint32_t data_in_sz, uint32_t data_out_sz);
int mpr_push_sge(struct mpr_command *, MPI2_SGE_SIMPLE64 *, size_t, int);
int mpr_push_ieee_sge(struct mpr_command *, void *, int);
int mpr_add_dmaseg(struct mpr_command *, vm_paddr_t, size_t, u_int, int);
int mpr_attach_sas(struct mpr_softc *sc);
int mpr_detach_sas(struct mpr_softc *sc);
int mpr_read_config_page(struct mpr_softc *, struct mpr_config_params *);
int mpr_write_config_page(struct mpr_softc *, struct mpr_config_params *);
void mpr_memaddr_cb(void *, bus_dma_segment_t *, int , int );
void mpr_init_sge(struct mpr_command *cm, void *req, void *sge);
int mpr_attach_user(struct mpr_softc *);
void mpr_detach_user(struct mpr_softc *);
void mprsas_record_event(struct mpr_softc *sc,
MPI2_EVENT_NOTIFICATION_REPLY *event_reply);
int mpr_map_command(struct mpr_softc *sc, struct mpr_command *cm);
int mpr_wait_command(struct mpr_softc *sc, struct mpr_command **cm, int timeout,
int sleep_flag);
int mpr_request_polled(struct mpr_softc *sc, struct mpr_command **cm);
int mpr_config_get_bios_pg3(struct mpr_softc *sc, Mpi2ConfigReply_t
*mpi_reply, Mpi2BiosPage3_t *config_page);
int mpr_config_get_raid_volume_pg0(struct mpr_softc *sc, Mpi2ConfigReply_t
*mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 page_address);
int mpr_config_get_ioc_pg8(struct mpr_softc *sc, Mpi2ConfigReply_t *,
Mpi2IOCPage8_t *);
int mpr_config_get_iounit_pg8(struct mpr_softc *sc,
Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page);
int mpr_config_get_sas_device_pg0(struct mpr_softc *, Mpi2ConfigReply_t *,
Mpi2SasDevicePage0_t *, u32 , u16 );
int mpr_config_get_pcie_device_pg0(struct mpr_softc *sc, Mpi2ConfigReply_t
*mpi_reply, Mpi26PCIeDevicePage0_t *config_page, u32 form, u16 handle);
int mpr_config_get_pcie_device_pg2(struct mpr_softc *sc, Mpi2ConfigReply_t
*mpi_reply, Mpi26PCIeDevicePage2_t *config_page, u32 form, u16 handle);
int mpr_config_get_dpm_pg0(struct mpr_softc *, Mpi2ConfigReply_t *,
Mpi2DriverMappingPage0_t *, u16 );
int mpr_config_get_raid_volume_pg1(struct mpr_softc *sc,
Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form,
u16 handle);
int mpr_config_get_volume_wwid(struct mpr_softc *sc, u16 volume_handle,
u64 *wwid);
int mpr_config_get_raid_pd_pg0(struct mpr_softc *sc,
Mpi2ConfigReply_t *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page,
u32 page_address);
void mprsas_ir_shutdown(struct mpr_softc *sc);
int mpr_reinit(struct mpr_softc *sc);
void mprsas_handle_reinit(struct mpr_softc *sc);
void mpr_base_static_config_pages(struct mpr_softc *sc);
int mpr_mapping_initialize(struct mpr_softc *);
void mpr_mapping_topology_change_event(struct mpr_softc *,
Mpi2EventDataSasTopologyChangeList_t *);
void mpr_mapping_pcie_topology_change_event(struct mpr_softc *sc,
Mpi26EventDataPCIeTopologyChangeList_t *event_data);
void mpr_mapping_free_memory(struct mpr_softc *sc);
int mpr_config_set_dpm_pg0(struct mpr_softc *, Mpi2ConfigReply_t *,
Mpi2DriverMappingPage0_t *, u16 );
void mpr_mapping_exit(struct mpr_softc *);
void mpr_mapping_check_devices(void *);
int mpr_mapping_allocate_memory(struct mpr_softc *sc);
unsigned int mpr_mapping_get_tid(struct mpr_softc *, uint64_t , u16);
unsigned int mpr_mapping_get_tid_from_handle(struct mpr_softc *sc,
u16 handle);
unsigned int mpr_mapping_get_raid_tid(struct mpr_softc *sc, u64 wwid,
u16 volHandle);
unsigned int mpr_mapping_get_raid_tid_from_handle(struct mpr_softc *sc,
u16 volHandle);
void mpr_mapping_enclosure_dev_status_change_event(struct mpr_softc *,
Mpi2EventDataSasEnclDevStatusChange_t *event_data);
void mpr_mapping_ir_config_change_event(struct mpr_softc *sc,
Mpi2EventDataIrConfigChangeList_t *event_data);
void mprsas_evt_handler(struct mpr_softc *sc, uintptr_t data,
MPI2_EVENT_NOTIFICATION_REPLY *event);
void mprsas_prepare_remove(struct mprsas_softc *sassc, uint16_t handle);
void mprsas_prepare_volume_remove(struct mprsas_softc *sassc, uint16_t handle);
int mprsas_startup(struct mpr_softc *sc);
struct mprsas_target * mprsas_find_target_by_handle(struct mprsas_softc *, int,
uint16_t);
void mprsas_realloc_targets(struct mpr_softc *sc, int maxtargets);
struct mpr_command * mprsas_alloc_tm(struct mpr_softc *sc);
void mprsas_free_tm(struct mpr_softc *sc, struct mpr_command *tm);
void mprsas_release_simq_reinit(struct mprsas_softc *sassc);
int mprsas_send_reset(struct mpr_softc *sc, struct mpr_command *tm,
uint8_t type);
SYSCTL_DECL(_hw_mpr);
/* Compatibility shims for different OS versions */
#if __FreeBSD_version >= 800001
#define mpr_kproc_create(func, farg, proc_ptr, flags, stackpgs, fmtstr, arg) \
kproc_create(func, farg, proc_ptr, flags, stackpgs, fmtstr, arg)
#define mpr_kproc_exit(arg) kproc_exit(arg)
#else
#define mpr_kproc_create(func, farg, proc_ptr, flags, stackpgs, fmtstr, arg) \
kthread_create(func, farg, proc_ptr, flags, stackpgs, fmtstr, arg)
#define mpr_kproc_exit(arg) kthread_exit(arg)
#endif
#if defined(CAM_PRIORITY_XPT)
#define MPR_PRIORITY_XPT CAM_PRIORITY_XPT
#else
#define MPR_PRIORITY_XPT 5
#endif
#if __FreeBSD_version < 800107
// Prior to FreeBSD-8.0 scp3_flags was not defined.
#define spc3_flags reserved
#define SPC3_SID_PROTECT 0x01
#define SPC3_SID_3PC 0x08
#define SPC3_SID_TPGS_MASK 0x30
#define SPC3_SID_TPGS_IMPLICIT 0x10
#define SPC3_SID_TPGS_EXPLICIT 0x20
#define SPC3_SID_ACC 0x40
#define SPC3_SID_SCCS 0x80
#define CAM_PRIORITY_NORMAL CAM_PRIORITY_NONE
#endif
/* Definitions for SCSI unmap translation to NVMe DSM command */
/* UNMAP block descriptor structure */
struct unmap_blk_desc {
uint64_t slba;
uint32_t nlb;
uint32_t resv;
};
/* UNMAP command's data */
struct unmap_parm_list {
uint16_t unmap_data_len;
uint16_t unmap_blk_desc_data_len;
uint32_t resv;
struct unmap_blk_desc desc[0];
};
/* SCSI ADDITIONAL SENSE Codes */
#define FIXED_SENSE_DATA 0x70
#define SCSI_ASC_NO_SENSE 0x00
#define SCSI_ASC_PERIPHERAL_DEV_WRITE_FAULT 0x03
#define SCSI_ASC_LUN_NOT_READY 0x04
#define SCSI_ASC_WARNING 0x0B
#define SCSI_ASC_LOG_BLOCK_GUARD_CHECK_FAILED 0x10
#define SCSI_ASC_LOG_BLOCK_APPTAG_CHECK_FAILED 0x10
#define SCSI_ASC_LOG_BLOCK_REFTAG_CHECK_FAILED 0x10
#define SCSI_ASC_UNRECOVERED_READ_ERROR 0x11
#define SCSI_ASC_MISCOMPARE_DURING_VERIFY 0x1D
#define SCSI_ASC_ACCESS_DENIED_INVALID_LUN_ID 0x20
#define SCSI_ASC_ILLEGAL_COMMAND 0x20
#define SCSI_ASC_ILLEGAL_BLOCK 0x21
#define SCSI_ASC_INVALID_CDB 0x24
#define SCSI_ASC_INVALID_LUN 0x25
#define SCSI_ASC_INVALID_PARAMETER 0x26
#define SCSI_ASC_FORMAT_COMMAND_FAILED 0x31
#define SCSI_ASC_INTERNAL_TARGET_FAILURE 0x44
/* SCSI ADDITIONAL SENSE Code Qualifiers */
#define SCSI_ASCQ_CAUSE_NOT_REPORTABLE 0x00
#define SCSI_ASCQ_FORMAT_COMMAND_FAILED 0x01
#define SCSI_ASCQ_LOG_BLOCK_GUARD_CHECK_FAILED 0x01
#define SCSI_ASCQ_LOG_BLOCK_APPTAG_CHECK_FAILED 0x02
#define SCSI_ASCQ_LOG_BLOCK_REFTAG_CHECK_FAILED 0x03
#define SCSI_ASCQ_FORMAT_IN_PROGRESS 0x04
#define SCSI_ASCQ_POWER_LOSS_EXPECTED 0x08
#define SCSI_ASCQ_INVALID_LUN_ID 0x09
#endif
Reference in New Issue View Git Blame Copy Permalink