e2763dca83
driver on Rockchip boards. It currently supports PIO mode and dma mode needs external dma controller to be used. Submitted by: jmcneill Approved by: stas (mentor)
153 lines
8.0 KiB
C
153 lines
8.0 KiB
C
/*-
|
|
* Copyright (c) 2014 Ruslan Bukin <br@bsdpad.com>
|
|
* All rights reserved.
|
|
*
|
|
* This software was developed by SRI International and the University of
|
|
* Cambridge Computer Laboratory under DARPA/AFRL contract (FA8750-10-C-0237)
|
|
* ("CTSRD"), as part of the DARPA CRASH research programme.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#define SDMMC_CTRL 0x0 /* Control Register */
|
|
#define SDMMC_CTRL_USE_IDMAC (1 << 25) /* Use Internal DMAC */
|
|
#define SDMMC_CTRL_DMA_ENABLE (1 << 5) /* */
|
|
#define SDMMC_CTRL_INT_ENABLE (1 << 4) /* Enable interrupts */
|
|
#define SDMMC_CTRL_DMA_RESET (1 << 2) /* Reset DMA */
|
|
#define SDMMC_CTRL_FIFO_RESET (1 << 1) /* Reset FIFO */
|
|
#define SDMMC_CTRL_RESET (1 << 0) /* Reset SD/MMC controller */
|
|
#define SDMMC_PWREN 0x4 /* Power Enable Register */
|
|
#define SDMMC_PWREN_PE (1 << 0) /* Power On */
|
|
#define SDMMC_CLKDIV 0x8 /* Clock Divider Register */
|
|
#define SDMMC_CLKSRC 0xC /* SD Clock Source Register */
|
|
#define SDMMC_CLKENA 0x10 /* Clock Enable Register */
|
|
#define SDMMC_CLKENA_LP (1 << 16) /* Low-power mode */
|
|
#define SDMMC_CLKENA_CCLK_EN (1 << 0) /* SD/MMC Enable */
|
|
#define SDMMC_TMOUT 0x14 /* Timeout Register */
|
|
#define SDMMC_CTYPE 0x18 /* Card Type Register */
|
|
#define SDMMC_CTYPE_8BIT (1 << 16)
|
|
#define SDMMC_CTYPE_4BIT (1 << 0)
|
|
#define SDMMC_BLKSIZ 0x1C /* Block Size Register */
|
|
#define SDMMC_BYTCNT 0x20 /* Byte Count Register */
|
|
#define SDMMC_INTMASK 0x24 /* Interrupt Mask Register */
|
|
#define SDMMC_INTMASK_SDIO (1 << 16) /* SDIO Interrupt Enable */
|
|
#define SDMMC_INTMASK_EBE (1 << 15) /* End-bit error */
|
|
#define SDMMC_INTMASK_ACD (1 << 14) /* Auto command done */
|
|
#define SDMMC_INTMASK_SBE (1 << 13) /* Start-bit error */
|
|
#define SDMMC_INTMASK_HLE (1 << 12) /* Hardware locked write err */
|
|
#define SDMMC_INTMASK_FRUN (1 << 11) /* FIFO underrun/overrun err */
|
|
#define SDMMC_INTMASK_HTO (1 << 10) /* Data starvation by host timeout */
|
|
#define SDMMC_INTMASK_DRT (1 << 9) /* Data read timeout */
|
|
#define SDMMC_INTMASK_RTO (1 << 8) /* Response timeout */
|
|
#define SDMMC_INTMASK_DCRC (1 << 7) /* Data CRC error */
|
|
#define SDMMC_INTMASK_RCRC (1 << 6) /* Response CRC error */
|
|
#define SDMMC_INTMASK_RXDR (1 << 5) /* Receive FIFO data request */
|
|
#define SDMMC_INTMASK_TXDR (1 << 4) /* Transmit FIFO data request */
|
|
#define SDMMC_INTMASK_DTO (1 << 3) /* Data transfer over */
|
|
#define SDMMC_INTMASK_CMD_DONE (1 << 2) /* Command done */
|
|
#define SDMMC_INTMASK_RE (1 << 1) /* Response error */
|
|
#define SDMMC_INTMASK_CD (1 << 0) /* Card Detected */
|
|
#define SDMMC_CMDARG 0x28 /* Command Argument Register */
|
|
#define SDMMC_CMD 0x2C /* Command Register */
|
|
#define SDMMC_CMD_START (1 << 31)
|
|
#define SDMMC_CMD_USE_HOLD_REG (1 << 29)
|
|
#define SDMMC_CMD_UPD_CLK_ONLY (1 << 21) /* Update clk only */
|
|
#define SDMMC_CMD_SEND_INIT (1 << 15) /* Send initialization */
|
|
#define SDMMC_CMD_STOP_ABORT (1 << 14) /* stop current data transfer */
|
|
#define SDMMC_CMD_WAIT_PRVDATA (1 << 13) /* Wait for prev data transfer completion */
|
|
#define SDMMC_CMD_SEND_ASTOP (1 << 12) /* Send stop command at end of data tx/rx */
|
|
#define SDMMC_CMD_MODE_STREAM (1 << 11) /* Stream data transfer */
|
|
#define SDMMC_CMD_DATA_WRITE (1 << 10) /* Write to card */
|
|
#define SDMMC_CMD_DATA_EXP (1 << 9) /* Data transfer expected */
|
|
#define SDMMC_CMD_RESP_CRC (1 << 8) /* Check Response CRC */
|
|
#define SDMMC_CMD_RESP_LONG (1 << 7) /* Long response expected */
|
|
#define SDMMC_CMD_RESP_EXP (1 << 6) /* Response expected */
|
|
#define SDMMC_RESP0 0x30 /* Response Register 0 */
|
|
#define SDMMC_RESP1 0x34 /* Response Register 1 */
|
|
#define SDMMC_RESP2 0x38 /* Response Register 2 */
|
|
#define SDMMC_RESP3 0x3C /* Response Register 3 */
|
|
#define SDMMC_MINTSTS 0x40 /* Masked Interrupt Status Register */
|
|
#define SDMMC_RINTSTS 0x44 /* Raw Interrupt Status Register */
|
|
#define SDMMC_STATUS 0x48 /* Status Register */
|
|
#define SDMMC_STATUS_DATA_BUSY (1 << 9) /* card_data[0] */
|
|
#define SDMMC_STATUS_FIFO_FULL (1 << 3) /* FIFO full */
|
|
#define SDMMC_STATUS_FIFO_EMPTY (1 << 2) /* FIFO empty */
|
|
#define SDMMC_FIFOTH 0x4C /* FIFO Threshold Watermark Register */
|
|
#define SDMMC_FIFOTH_MSIZE_S 28 /* Burst size of multiple transaction */
|
|
#define SDMMC_FIFOTH_RXWMARK_S 16 /* FIFO threshold watermark level */
|
|
#define SDMMC_FIFOTH_TXWMARK_S 0 /* FIFO threshold watermark level */
|
|
#define SDMMC_CDETECT 0x50 /* Card Detect Register */
|
|
#define SDMMC_WRTPRT 0x54 /* Write Protect Register */
|
|
#define SDMMC_TCBCNT 0x5C /* Transferred CIU Card Byte Count */
|
|
#define SDMMC_TBBCNT 0x60 /* Transferred Host to BIU-FIFO Byte Count */
|
|
#define SDMMC_DEBNCE 0x64 /* Debounce Count Register */
|
|
#define SDMMC_USRID 0x68 /* User ID Register */
|
|
#define SDMMC_VERID 0x6C /* Version ID Register */
|
|
#define SDMMC_HCON 0x70 /* Hardware Configuration Register */
|
|
#define SDMMC_UHS_REG 0x74 /* UHS-1 Register */
|
|
#define SDMMC_UHS_REG_DDR (1 << 16) /* DDR mode */
|
|
#define SDMMC_RST_N 0x78 /* Hardware Reset Register */
|
|
#define SDMMC_BMOD 0x80 /* Bus Mode Register */
|
|
#define SDMMC_BMOD_DE (1 << 7) /* IDMAC Enable */
|
|
#define SDMMC_BMOD_FB (1 << 1) /* AHB Master Fixed Burst */
|
|
#define SDMMC_BMOD_SWR (1 << 0) /* Reset DMA */
|
|
#define SDMMC_PLDMND 0x84 /* Poll Demand Register */
|
|
#define SDMMC_DBADDR 0x88 /* Descriptor List Base Address */
|
|
#define SDMMC_IDSTS 0x8C /* Internal DMAC Status Register */
|
|
#define SDMMC_IDINTEN 0x90 /* Internal DMAC Interrupt Enable */
|
|
#define SDMMC_IDINTEN_AI (1 << 9) /* Abnormal Interrupt Summary */
|
|
#define SDMMC_IDINTEN_NI (1 << 8) /* Normal Interrupt Summary */
|
|
#define SDMMC_IDINTEN_CES (1 << 5) /* Card Error Summary */
|
|
#define SDMMC_IDINTEN_DU (1 << 4) /* Descriptor Unavailable */
|
|
#define SDMMC_IDINTEN_FBE (1 << 2) /* Fatal Bus Error */
|
|
#define SDMMC_IDINTEN_RI (1 << 1) /* Receive Interrupt */
|
|
#define SDMMC_IDINTEN_TI (1 << 0) /* Transmit Interrupt */
|
|
#define SDMMC_IDINTEN_MASK (SDMMC_IDINTEN_AI | SDMMC_IDINTEN_NI | SDMMC_IDINTEN_CES | \
|
|
SDMMC_IDINTEN_DU | SDMMC_IDINTEN_FBE | SDMMC_IDINTEN_RI | \
|
|
SDMMC_IDINTEN_TI)
|
|
#define SDMMC_DSCADDR 0x94 /* Current Host Descriptor Address */
|
|
#define SDMMC_BUFADDR 0x98 /* Current Buffer Descriptor Address */
|
|
#define SDMMC_CARDTHRCTL 0x100 /* Card Threshold Control Register */
|
|
#define SDMMC_BACK_END_POWER_R 0x104 /* Back End Power Register */
|
|
#define SDMMC_DATA 0x200 /* Data FIFO Access */
|
|
|
|
/* eMMC */
|
|
#define EMMCP_MPSBEGIN0 0x1200 /* */
|
|
#define EMMCP_SEND0 0x1204 /* */
|
|
#define EMMCP_CTRL0 0x120C /* */
|
|
#define MPSCTRL_SECURE_READ_BIT (1 << 7)
|
|
#define MPSCTRL_SECURE_WRITE_BIT (1 << 6)
|
|
#define MPSCTRL_NON_SECURE_READ_BIT (1 << 5)
|
|
#define MPSCTRL_NON_SECURE_WRITE_BIT (1 << 4)
|
|
#define MPSCTRL_USE_FUSE_KEY (1 << 3)
|
|
#define MPSCTRL_ECB_MODE (1 << 2)
|
|
#define MPSCTRL_ENCRYPTION (1 << 1)
|
|
#define MPSCTRL_VALID (1 << 0)
|
|
|
|
/* Platform-specific defines */
|
|
#define SDMMC_CLKSEL 0x9C
|
|
#define SDMMC_CLKSEL_SAMPLE_SHIFT 0
|
|
#define SDMMC_CLKSEL_DRIVE_SHIFT 16
|
|
#define SDMMC_CLKSEL_DIVIDER_SHIFT 24
|