freebsd-nq/share/man/man4/man4.i386
Bill Paul 3ebb090530 This commit adds driver support for the SysKonnect SK-984x series
gigabit ethernet adapters. This includes two single port cards
(single mode and multimode fiber) and two dual port cards (also single
mode and multimode fiber). SysKonnect is currently the only
vendor with a dual port gigabit ethernet NIC.

The ports on dual port adapters are treated as separate network
interfaces. Thus, if you have an SK-9844 dual port SX card, you
should have both sk0 and sk1 interfaces attached. Dual port cards
are implemented using two XMAC II chips connected to a single
SysKonnect GEnesis controller. Hence, dual port cards are really
one PCI device, as opposed to two separate PCI devices connected
through a PCI to PCI bridge. Note that SysKonnect's drivers use
the two ports for failover purposes rather that as two separate
interfaces, plus they don't support jumbo frames. This applies to
their Linux driver too. :)

Support is provided for hardware multicast filtering, BPF and
jumbo frames. The SysKonnect cards support TCP checksum offload
however this feature is not currently enabled (hopefully it will
be once we get checksum offload support).

There are still a few things that need to be implemeted, like
the ability to communicate with the on-board LM80 voltage/temperature
monitor, but I wanted to get the driver under CVS control and into
-current so people could bang on it.

A big thanks for SysKonnect for making all their programming info
for these cards (and for their FDDI and token ring cards) available
without NDA (see www.syskonnect.com).
1999-07-09 04:30:09 +00:00
..
adv.4 Add in the adv(4) and adw(4) man pages for the AdvanSys narrow and wide 1998-10-16 21:12:07 +00:00
adw.4 Add in the adv(4) and adw(4) man pages for the AdvanSys narrow and wide 1998-10-16 21:12:07 +00:00
aha.4 Update the aha(4) and ahb(4) man pages for CAM. 1998-10-16 04:41:38 +00:00
ahb.4 Update the aha(4) and ahb(4) man pages for CAM. 1998-10-16 04:41:38 +00:00
ahc.4 The 2930U2 and 3950U2 are supported by the Adaptec driver. 1999-05-08 21:43:28 +00:00
aic.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
al.4 Fix a couple of small grammatical errors. 1999-05-21 14:59:48 +00:00
alpm.4 Add alpm.4, Aladdin Power Management SMBus support for the SMBus framework. 1999-02-13 17:48:41 +00:00
apm.4 Fix spelling nits. 1998-12-18 03:08:57 +00:00
ar.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
asc.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
atkbd.4 List avaiable function keys. 1999-07-06 13:13:47 +00:00
atkbdc.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
ax.4 Fix a couple of small grammatical errors. 1999-05-21 14:59:48 +00:00
bktr.4 Add few declaration for the iicbus/smbus system. 1998-11-04 22:13:35 +00:00
bt.4 Update the bt(4) man page for CAM. 1998-10-16 21:33:34 +00:00
cs.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
cx.4 Show the real revision date and not the date that this 1997-06-23 04:03:49 +00:00
cy.4 Updated the BUGS section. BREAK is now implemented. 1999-06-14 15:10:35 +00:00
de.4 .Sh AUTHOR -> .Sh AUTHORS according to mdoc specs. 1998-03-12 07:31:21 +00:00
dgb.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
dpt.4 Add the dpt(4) man page. 1998-10-16 22:00:55 +00:00
ed.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
el.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
en.4 Sort cross references. 1998-08-31 16:41:09 +00:00
ep.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
ex.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
fdc.4 Pre 3.0 branch cleanup casualty #6: ft 1998-12-27 13:40:57 +00:00
fe.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
fxp.4 Add Pro/100+ (i82559) to the list of supported products. 1999-06-25 16:48:56 +00:00
gsc.4 Spelling fixes. 1998-06-08 06:12:02 +00:00
ie.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
io.4 Use the .Fx macro for FreeBSD references for releases prior to 2.0. 1997-03-21 20:14:15 +00:00
joy.4 Fix confusing sentence, the PR noticed the sentence, I rewrote the sentence. 1999-05-06 20:51:31 +00:00
keyboard.4 Fix .Ar usage. Add .Xrefs as appropriate. 1998-06-29 07:04:08 +00:00
labpc.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
le.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
lnc.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
Makefile This commit adds driver support for the SysKonnect SK-984x series 1999-07-09 04:30:09 +00:00
matcd.4 .Sh AUTHOR -> .Sh AUTHORS according to mdoc specs. 1998-03-12 07:31:21 +00:00
mcd.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
mem.4 Document the new generic memory range management ioctls. 1999-04-07 04:03:51 +00:00
meteor.4 Make "\n" appear in cample C code. 1999-05-04 21:03:22 +00:00
mouse.4 .Sh AUTHOR -> .Sh AUTHORS according to mdoc specs. 1998-03-12 07:31:21 +00:00
mse.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
mtio.4 document new features 1999-02-05 07:59:07 +00:00
mx.4 Fix support for the PNIC II. Earlier I had assumed that the PNIC II was 1999-05-28 18:43:25 +00:00
ncr.4 Correct sd', st' -> da', sa'; add xref to scsi(4); remove xref 1999-05-05 04:01:40 +00:00
npx.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
ohci.4 Added man page usb uhci ohci 1999-02-21 16:56:33 +00:00
pcf.4 `vector xxxintr' should cause a syntax error. 1998-10-29 09:42:05 +00:00
pcm.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
pcvt.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
perfmon.4 .Sh AUTHOR -> .Sh AUTHORS according to mdoc specs. 1998-03-12 07:31:21 +00:00
pn.4 Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA 1999-05-05 07:37:11 +00:00
pnp.4 Refer to kget(8) instead of dset(8). 1999-05-14 05:16:18 +00:00
ppc.4 Remove imm.4, merged with vpo.4 1999-01-23 14:01:55 +00:00
psm.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
rdp.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
rl.4 Fix recurring typo: fine -> file 1999-03-25 00:52:44 +00:00
sb.4 Removed all `vector xxxintr' specifications. Interrupt handlers are now 1998-10-22 14:12:55 +00:00
scd.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
screen.4 s/cF/nF/ in a couple of places. 1999-05-16 23:51:10 +00:00
si.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
sio.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
sk.4 This commit adds driver support for the SysKonnect SK-984x series 1999-07-09 04:30:09 +00:00
spkr.4 Typo 1999-04-25 17:08:50 +00:00
splash.4 Mention the new splash_pcx decoder. 1999-04-12 18:56:51 +00:00
sr.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
syscons.4 Reflect recent changes in syscons and vga. 1999-07-05 10:03:05 +00:00
sysmouse.4 .Sh AUTHOR -> .Sh AUTHORS according to mdoc specs. 1998-03-12 07:31:21 +00:00
ti.4 Add driver support for gigabit ethernet adapters based on the Alteon 1999-04-06 17:08:31 +00:00
tl.4 Add two additional cards to the supported adapters list: the Racore 8165 1999-01-29 16:25:20 +00:00
tw.4 .Sh AUTHOR -> .Sh AUTHORS according to mdoc specs. 1998-03-12 07:31:21 +00:00
tx.4 Add $Id$ 1999-05-02 05:43:43 +00:00
uhci.4 Added man page usb uhci ohci 1999-02-21 16:56:33 +00:00
ukbd.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
umass.4 Add the USB Mass Storage manual page 1999-05-09 19:35:51 +00:00
ums.4 Clarified info on X release 3.3.1. 1999-06-18 16:53:33 +00:00
usb.4 Added man page usb uhci ohci 1999-02-21 16:56:33 +00:00
vga.4 Reflect recent changes in syscons and vga. 1999-07-05 10:03:05 +00:00
vr.4 Fix recurring typo: fine -> file 1999-03-25 00:52:44 +00:00
vx.4 .Sh AUTHOR -> .Sh AUTHORS according to mdoc specs. 1998-03-12 07:31:21 +00:00
wb.4 Fix recurring typo: fine -> file 1999-03-25 00:52:44 +00:00
wd.4 There are six bit fields in the flags now, not four. 1999-05-27 02:41:06 +00:00
wfd.4 Fix a couple of typos related to wfd. 1999-05-29 13:08:12 +00:00
wi.4 - Fix up some comments in if_wi.c (no code changes) 1999-05-22 16:12:54 +00:00
wl.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
wt.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
xl.4 1) line 76: "fine" should be "file" 1999-03-15 02:49:13 +00:00
ze.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00
zp.4 Remove bio/cam/net/tty labels. 1999-05-20 09:56:18 +00:00