freebsd-nq/sys/dev/ixl/i40e_hmc.c
Jack F Vogel 61ae650d55 Update to the Intel Base driver for the Intel XL710 Ethernet Controller Family
- It was decided to change the driver name to if_ixl for FreeBSD
	- This release adds the VF Driver to the tree, it can be built into
	  the kernel or as the if_ixlv module
	- The VF driver is independent for the first time, this will be
	  desireable when full SRIOV capability is added to the OS.
	- Thanks to my new coworker Eric Joyner for his superb work in
	  both the core and vf driver code.

Enjoy everyone!

Submitted by:	jack.vogel@intel.com and eric.joyner@intel.com
MFC after:	3 days (hoping to make 10.1)
2014-08-22 18:59:19 +00:00

377 lines
12 KiB
C
Executable File

/******************************************************************************
Copyright (c) 2013-2014, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the Intel Corporation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
******************************************************************************/
/*$FreeBSD$*/
#include "i40e_osdep.h"
#include "i40e_register.h"
#include "i40e_status.h"
#include "i40e_alloc.h"
#include "i40e_hmc.h"
#ifndef I40E_NO_TYPE_HEADER
#include "i40e_type.h"
#endif
/**
* i40e_add_sd_table_entry - Adds a segment descriptor to the table
* @hw: pointer to our hw struct
* @hmc_info: pointer to the HMC configuration information struct
* @sd_index: segment descriptor index to manipulate
* @type: what type of segment descriptor we're manipulating
* @direct_mode_sz: size to alloc in direct mode
**/
enum i40e_status_code i40e_add_sd_table_entry(struct i40e_hw *hw,
struct i40e_hmc_info *hmc_info,
u32 sd_index,
enum i40e_sd_entry_type type,
u64 direct_mode_sz)
{
enum i40e_status_code ret_code = I40E_SUCCESS;
struct i40e_hmc_sd_entry *sd_entry;
enum i40e_memory_type mem_type;
bool dma_mem_alloc_done = FALSE;
struct i40e_dma_mem mem;
u64 alloc_len;
if (NULL == hmc_info->sd_table.sd_entry) {
ret_code = I40E_ERR_BAD_PTR;
DEBUGOUT("i40e_add_sd_table_entry: bad sd_entry\n");
goto exit;
}
if (sd_index >= hmc_info->sd_table.sd_cnt) {
ret_code = I40E_ERR_INVALID_SD_INDEX;
DEBUGOUT("i40e_add_sd_table_entry: bad sd_index\n");
goto exit;
}
sd_entry = &hmc_info->sd_table.sd_entry[sd_index];
if (!sd_entry->valid) {
if (I40E_SD_TYPE_PAGED == type) {
mem_type = i40e_mem_pd;
alloc_len = I40E_HMC_PAGED_BP_SIZE;
} else {
mem_type = i40e_mem_bp_jumbo;
alloc_len = direct_mode_sz;
}
/* allocate a 4K pd page or 2M backing page */
ret_code = i40e_allocate_dma_mem(hw, &mem, mem_type, alloc_len,
I40E_HMC_PD_BP_BUF_ALIGNMENT);
if (ret_code)
goto exit;
dma_mem_alloc_done = TRUE;
if (I40E_SD_TYPE_PAGED == type) {
ret_code = i40e_allocate_virt_mem(hw,
&sd_entry->u.pd_table.pd_entry_virt_mem,
sizeof(struct i40e_hmc_pd_entry) * 512);
if (ret_code)
goto exit;
sd_entry->u.pd_table.pd_entry =
(struct i40e_hmc_pd_entry *)
sd_entry->u.pd_table.pd_entry_virt_mem.va;
i40e_memcpy(&sd_entry->u.pd_table.pd_page_addr,
&mem, sizeof(struct i40e_dma_mem),
I40E_NONDMA_TO_NONDMA);
} else {
i40e_memcpy(&sd_entry->u.bp.addr,
&mem, sizeof(struct i40e_dma_mem),
I40E_NONDMA_TO_NONDMA);
sd_entry->u.bp.sd_pd_index = sd_index;
}
/* initialize the sd entry */
hmc_info->sd_table.sd_entry[sd_index].entry_type = type;
/* increment the ref count */
I40E_INC_SD_REFCNT(&hmc_info->sd_table);
}
/* Increment backing page reference count */
if (I40E_SD_TYPE_DIRECT == sd_entry->entry_type)
I40E_INC_BP_REFCNT(&sd_entry->u.bp);
exit:
if (I40E_SUCCESS != ret_code)
if (dma_mem_alloc_done)
i40e_free_dma_mem(hw, &mem);
return ret_code;
}
/**
* i40e_add_pd_table_entry - Adds page descriptor to the specified table
* @hw: pointer to our HW structure
* @hmc_info: pointer to the HMC configuration information structure
* @pd_index: which page descriptor index to manipulate
*
* This function:
* 1. Initializes the pd entry
* 2. Adds pd_entry in the pd_table
* 3. Mark the entry valid in i40e_hmc_pd_entry structure
* 4. Initializes the pd_entry's ref count to 1
* assumptions:
* 1. The memory for pd should be pinned down, physically contiguous and
* aligned on 4K boundary and zeroed memory.
* 2. It should be 4K in size.
**/
enum i40e_status_code i40e_add_pd_table_entry(struct i40e_hw *hw,
struct i40e_hmc_info *hmc_info,
u32 pd_index)
{
enum i40e_status_code ret_code = I40E_SUCCESS;
struct i40e_hmc_pd_table *pd_table;
struct i40e_hmc_pd_entry *pd_entry;
struct i40e_dma_mem mem;
u32 sd_idx, rel_pd_idx;
u64 *pd_addr;
u64 page_desc;
if (pd_index / I40E_HMC_PD_CNT_IN_SD >= hmc_info->sd_table.sd_cnt) {
ret_code = I40E_ERR_INVALID_PAGE_DESC_INDEX;
DEBUGOUT("i40e_add_pd_table_entry: bad pd_index\n");
goto exit;
}
/* find corresponding sd */
sd_idx = (pd_index / I40E_HMC_PD_CNT_IN_SD);
if (I40E_SD_TYPE_PAGED !=
hmc_info->sd_table.sd_entry[sd_idx].entry_type)
goto exit;
rel_pd_idx = (pd_index % I40E_HMC_PD_CNT_IN_SD);
pd_table = &hmc_info->sd_table.sd_entry[sd_idx].u.pd_table;
pd_entry = &pd_table->pd_entry[rel_pd_idx];
if (!pd_entry->valid) {
/* allocate a 4K backing page */
ret_code = i40e_allocate_dma_mem(hw, &mem, i40e_mem_bp,
I40E_HMC_PAGED_BP_SIZE,
I40E_HMC_PD_BP_BUF_ALIGNMENT);
if (ret_code)
goto exit;
i40e_memcpy(&pd_entry->bp.addr, &mem,
sizeof(struct i40e_dma_mem), I40E_NONDMA_TO_NONDMA);
pd_entry->bp.sd_pd_index = pd_index;
pd_entry->bp.entry_type = I40E_SD_TYPE_PAGED;
/* Set page address and valid bit */
page_desc = mem.pa | 0x1;
pd_addr = (u64 *)pd_table->pd_page_addr.va;
pd_addr += rel_pd_idx;
/* Add the backing page physical address in the pd entry */
i40e_memcpy(pd_addr, &page_desc, sizeof(u64),
I40E_NONDMA_TO_DMA);
pd_entry->sd_index = sd_idx;
pd_entry->valid = TRUE;
I40E_INC_PD_REFCNT(pd_table);
}
I40E_INC_BP_REFCNT(&pd_entry->bp);
exit:
return ret_code;
}
/**
* i40e_remove_pd_bp - remove a backing page from a page descriptor
* @hw: pointer to our HW structure
* @hmc_info: pointer to the HMC configuration information structure
* @idx: the page index
* @is_pf: distinguishes a VF from a PF
*
* This function:
* 1. Marks the entry in pd tabe (for paged address mode) or in sd table
* (for direct address mode) invalid.
* 2. Write to register PMPDINV to invalidate the backing page in FV cache
* 3. Decrement the ref count for the pd _entry
* assumptions:
* 1. Caller can deallocate the memory used by backing storage after this
* function returns.
**/
enum i40e_status_code i40e_remove_pd_bp(struct i40e_hw *hw,
struct i40e_hmc_info *hmc_info,
u32 idx)
{
enum i40e_status_code ret_code = I40E_SUCCESS;
struct i40e_hmc_pd_entry *pd_entry;
struct i40e_hmc_pd_table *pd_table;
struct i40e_hmc_sd_entry *sd_entry;
u32 sd_idx, rel_pd_idx;
u64 *pd_addr;
/* calculate index */
sd_idx = idx / I40E_HMC_PD_CNT_IN_SD;
rel_pd_idx = idx % I40E_HMC_PD_CNT_IN_SD;
if (sd_idx >= hmc_info->sd_table.sd_cnt) {
ret_code = I40E_ERR_INVALID_PAGE_DESC_INDEX;
DEBUGOUT("i40e_remove_pd_bp: bad idx\n");
goto exit;
}
sd_entry = &hmc_info->sd_table.sd_entry[sd_idx];
if (I40E_SD_TYPE_PAGED != sd_entry->entry_type) {
ret_code = I40E_ERR_INVALID_SD_TYPE;
DEBUGOUT("i40e_remove_pd_bp: wrong sd_entry type\n");
goto exit;
}
/* get the entry and decrease its ref counter */
pd_table = &hmc_info->sd_table.sd_entry[sd_idx].u.pd_table;
pd_entry = &pd_table->pd_entry[rel_pd_idx];
I40E_DEC_BP_REFCNT(&pd_entry->bp);
if (pd_entry->bp.ref_cnt)
goto exit;
/* mark the entry invalid */
pd_entry->valid = FALSE;
I40E_DEC_PD_REFCNT(pd_table);
pd_addr = (u64 *)pd_table->pd_page_addr.va;
pd_addr += rel_pd_idx;
i40e_memset(pd_addr, 0, sizeof(u64), I40E_DMA_MEM);
I40E_INVALIDATE_PF_HMC_PD(hw, sd_idx, idx);
/* free memory here */
ret_code = i40e_free_dma_mem(hw, &(pd_entry->bp.addr));
if (I40E_SUCCESS != ret_code)
goto exit;
if (!pd_table->ref_cnt)
i40e_free_virt_mem(hw, &pd_table->pd_entry_virt_mem);
exit:
return ret_code;
}
/**
* i40e_prep_remove_sd_bp - Prepares to remove a backing page from a sd entry
* @hmc_info: pointer to the HMC configuration information structure
* @idx: the page index
**/
enum i40e_status_code i40e_prep_remove_sd_bp(struct i40e_hmc_info *hmc_info,
u32 idx)
{
enum i40e_status_code ret_code = I40E_SUCCESS;
struct i40e_hmc_sd_entry *sd_entry;
/* get the entry and decrease its ref counter */
sd_entry = &hmc_info->sd_table.sd_entry[idx];
I40E_DEC_BP_REFCNT(&sd_entry->u.bp);
if (sd_entry->u.bp.ref_cnt) {
ret_code = I40E_ERR_NOT_READY;
goto exit;
}
I40E_DEC_SD_REFCNT(&hmc_info->sd_table);
/* mark the entry invalid */
sd_entry->valid = FALSE;
exit:
return ret_code;
}
/**
* i40e_remove_sd_bp_new - Removes a backing page from a segment descriptor
* @hw: pointer to our hw struct
* @hmc_info: pointer to the HMC configuration information structure
* @idx: the page index
* @is_pf: used to distinguish between VF and PF
**/
enum i40e_status_code i40e_remove_sd_bp_new(struct i40e_hw *hw,
struct i40e_hmc_info *hmc_info,
u32 idx, bool is_pf)
{
struct i40e_hmc_sd_entry *sd_entry;
enum i40e_status_code ret_code = I40E_SUCCESS;
/* get the entry and decrease its ref counter */
sd_entry = &hmc_info->sd_table.sd_entry[idx];
if (is_pf) {
I40E_CLEAR_PF_SD_ENTRY(hw, idx, I40E_SD_TYPE_DIRECT);
} else {
ret_code = I40E_NOT_SUPPORTED;
goto exit;
}
ret_code = i40e_free_dma_mem(hw, &(sd_entry->u.bp.addr));
if (I40E_SUCCESS != ret_code)
goto exit;
exit:
return ret_code;
}
/**
* i40e_prep_remove_pd_page - Prepares to remove a PD page from sd entry.
* @hmc_info: pointer to the HMC configuration information structure
* @idx: segment descriptor index to find the relevant page descriptor
**/
enum i40e_status_code i40e_prep_remove_pd_page(struct i40e_hmc_info *hmc_info,
u32 idx)
{
enum i40e_status_code ret_code = I40E_SUCCESS;
struct i40e_hmc_sd_entry *sd_entry;
sd_entry = &hmc_info->sd_table.sd_entry[idx];
if (sd_entry->u.pd_table.ref_cnt) {
ret_code = I40E_ERR_NOT_READY;
goto exit;
}
/* mark the entry invalid */
sd_entry->valid = FALSE;
I40E_DEC_SD_REFCNT(&hmc_info->sd_table);
exit:
return ret_code;
}
/**
* i40e_remove_pd_page_new - Removes a PD page from sd entry.
* @hw: pointer to our hw struct
* @hmc_info: pointer to the HMC configuration information structure
* @idx: segment descriptor index to find the relevant page descriptor
* @is_pf: used to distinguish between VF and PF
**/
enum i40e_status_code i40e_remove_pd_page_new(struct i40e_hw *hw,
struct i40e_hmc_info *hmc_info,
u32 idx, bool is_pf)
{
enum i40e_status_code ret_code = I40E_SUCCESS;
struct i40e_hmc_sd_entry *sd_entry;
sd_entry = &hmc_info->sd_table.sd_entry[idx];
if (is_pf) {
I40E_CLEAR_PF_SD_ENTRY(hw, idx, I40E_SD_TYPE_PAGED);
} else {
ret_code = I40E_NOT_SUPPORTED;
goto exit;
}
/* free memory here */
ret_code = i40e_free_dma_mem(hw, &(sd_entry->u.pd_table.pd_page_addr));
if (I40E_SUCCESS != ret_code)
goto exit;
exit:
return ret_code;
}