321 lines
12 KiB
C
321 lines
12 KiB
C
/*-
|
|
* Copyright (c) 1991 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* William Jolitz.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from: @(#)wdreg.h 7.1 (Berkeley) 5/9/91
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* modified for PC9801 by F.Ukai
|
|
* Kyoto University Microcomputer Club (KMC)
|
|
*/
|
|
|
|
/*
|
|
* Disk Controller register definitions.
|
|
*/
|
|
#ifdef PC98
|
|
#define wd_data 0x0 /* data register (R/W - 16 bits) */
|
|
#define wd_error 0x2 /* error register (R) */
|
|
#define wd_precomp wd_error /* write precompensation (W) */
|
|
#define wd_features wd_error /* features register (W) */
|
|
#define wd_seccnt 0x4 /* sector count (R/W) */
|
|
#define wd_sector 0x6 /* first sector number (R/W) */
|
|
#define wd_cyl_lo 0x8 /* cylinder address, low byte (R/W) */
|
|
#define wd_cyl_hi 0xa /* cylinder address, high byte (R/W)*/
|
|
#define wd_sdh 0xc /* sector size/drive/head (R/W)*/
|
|
#define wd_command 0xe /* command register (W) */
|
|
#define wd_status wd_command /* immediate status (R) */
|
|
|
|
#define wd_altsts_nec 0x10c /*alternate fixed disk status(via 1015) (R)*/
|
|
#define wd_ctlr_nec 0x10c /*fixed disk controller control(via 1015) (W)*/
|
|
#define wd_altsts_epson 0x3 /*alternate fixed disk status(via 1015) (R)*/
|
|
#define wd_ctlr_epson 0x3 /*fixed disk controller control(via 1015) (W)*/
|
|
#define wd_altsts wd_altsts_nec
|
|
|
|
#define WDCTL_4BIT 0x8 /* use four head bits (wd1003) */
|
|
#define WDCTL_RST 0x4 /* reset the controller */
|
|
#define WDCTL_IDS 0x2 /* disable controller interrupts */
|
|
#define wd_digin 0x10e /* disk controller input(via 1015) (R)*/
|
|
#else /* IBM-PC */
|
|
#define wd_data 0x0 /* data register (R/W - 16 bits) */
|
|
#define wd_error 0x1 /* error register (R) */
|
|
#define wd_precomp wd_error /* write precompensation (W) */
|
|
#define wd_features wd_error /* features register (W) */
|
|
#define wd_seccnt 0x2 /* sector count (R/W) */
|
|
#define wd_sector 0x3 /* first sector number (R/W) */
|
|
#define wd_cyl_lo 0x4 /* cylinder address, low byte (R/W) */
|
|
#define wd_cyl_hi 0x5 /* cylinder address, high byte (R/W)*/
|
|
#define wd_sdh 0x6 /* sector size/drive/head (R/W)*/
|
|
#define wd_command 0x7 /* command register (W) */
|
|
#define wd_status wd_command /* immediate status (R) */
|
|
|
|
#define wd_altsts 0x206 /*alternate fixed disk status(via 1015) (R)*/
|
|
#define wd_ctlr 0x206 /*fixed disk controller control(via 1015) (W)*/
|
|
#define WDCTL_4BIT 0x8 /* use four head bits (wd1003) */
|
|
#define WDCTL_RST 0x4 /* reset the controller */
|
|
#define WDCTL_IDS 0x2 /* disable controller interrupts */
|
|
#define wd_digin 0x207 /* disk controller input(via 1015) (R)*/
|
|
#endif /* PC98 */
|
|
|
|
/*
|
|
* Status Bits.
|
|
*/
|
|
#define WDCS_BUSY 0x80 /* Controller busy bit. */
|
|
#define WDCS_READY 0x40 /* Selected drive is ready */
|
|
#define WDCS_WRTFLT 0x20 /* Write fault */
|
|
#define WDCS_SEEKCMPLT 0x10 /* Seek complete */
|
|
#define WDCS_DRQ 0x08 /* Data request bit. */
|
|
#define WDCS_ECCCOR 0x04 /* ECC correction made in data */
|
|
#define WDCS_INDEX 0x02 /* Index pulse from selected drive */
|
|
#define WDCS_ERR 0x01 /* Error detect bit. */
|
|
|
|
#define WDCS_BITS "\020\010busy\007rdy\006wrtflt\005seekdone\004drq\003ecc_cor\002index\001err"
|
|
#define WDERR_ABORT 0x04
|
|
|
|
#define WDERR_BITS "\020\010badblk\007uncorr\006id_crc\005no_id\003abort\002tr000\001no_dam"
|
|
|
|
/*
|
|
* Commands for Disk Controller.
|
|
*/
|
|
#define WDCC_RESTORE 0x10 /* disk restore code -- resets cntlr */
|
|
|
|
#define WDCC_READ 0x20 /* disk read code */
|
|
#define WDCC_WRITE 0x30 /* disk write code */
|
|
#define WDCC__LONG 0x02 /* modifier -- access ecc bytes */
|
|
#define WDCC__NORETRY 0x01 /* modifier -- no retrys */
|
|
|
|
#define WDCC_FORMAT 0x50 /* disk format code */
|
|
#define WDCC_DIAGNOSE 0x90 /* controller diagnostic */
|
|
#define WDCC_IDC 0x91 /* initialize drive command */
|
|
#define WDCC_READ_MULTI 0xC4 /* read multiple */
|
|
#define WDCC_WRITE_MULTI 0xC5 /* write multiple */
|
|
#define WDCC_SET_MULTI 0xC6 /* set multiple count */
|
|
#define WDCC_READ_DMA 0xC8 /* read using DMA */
|
|
#define WDCC_WRITE_DMA 0xCA /* write using DMA */
|
|
|
|
|
|
#define WDCC_EXTDCMD 0xE0 /* send extended command */
|
|
#define WDCC_READP 0xEC /* read parameters from controller */
|
|
#define WDCC_FEATURES 0xEF /* features control */
|
|
|
|
#define WDCC_DEFECT 0xF0 /* read defect list */
|
|
|
|
#define WDFEA_NORCACHE 0x55 /* read cache disable */
|
|
#define WDFEA_RCACHE 0xAA /* read cache enable */
|
|
#define WDFEA_NOWCACHE 0x82 /* write cache disable */
|
|
#define WDFEA_WCACHE 0x02 /* write cache enable */
|
|
#define WDFEA_SETXFER 0x03 /* set transfer mode */
|
|
|
|
#define WD_STEP 0 /* winchester- default 35us step */
|
|
|
|
#define WDSD_IBM 0xa0 /* forced to 512 byte sector, ecc */
|
|
#define WDSD_LBA 0x40 /* use Logical Block Adressing */
|
|
|
|
#ifdef _KERNEL
|
|
/*
|
|
* read parameters command returns this:
|
|
*/
|
|
struct wdparams {
|
|
/*
|
|
* XXX partly based on DRAFT X3T13/1153D rev 14.
|
|
* by the time you read this it will have changed.
|
|
* Offsets in words
|
|
* (as that's how they are usually presented in tables
|
|
* e.g. QUANTUM Product manuals)
|
|
*/
|
|
/* drive info */
|
|
short wdp_config; /*0 general configuration bits */
|
|
u_short wdp_cylinders; /*1 number of cylinders */
|
|
short wdp_reserved2; /*2*/
|
|
u_short wdp_heads; /*3 number of heads */
|
|
short wdp_unfbytespertrk; /*4 number of unformatted bytes/track */
|
|
short wdp_unfbytes; /*5 number of unformatted bytes/sec */
|
|
u_short wdp_sectors; /*6 number of sectors per track */
|
|
short wdp_vendorunique[3]; /*7,8,9*/
|
|
/* controller info */
|
|
char wdp_serial[20]; /*10-19 serial number */
|
|
short wdp_buffertype; /*20 buffer type */
|
|
#define WDTYPE_SINGLEPORTSECTOR 1 /* single port, single sector buffer */
|
|
#define WDTYPE_DUALPORTMULTI 2 /* dual port, multiple sector buffer */
|
|
#define WDTYPE_DUALPORTMULTICACHE 3 /* above plus track cache */
|
|
short wdp_buffersize; /*21 buffer size, in 512-byte units */
|
|
short wdp_necc; /*22 ecc bytes appended */
|
|
char wdp_rev[8]; /*23-26 firmware revision */
|
|
char wdp_model[40]; /*27-46 model name */
|
|
char wdp_nsecperint; /*47L sectors per interrupt */
|
|
char wdp_vendorunique1; /*47H*/
|
|
short wdp_usedmovsd; /*48 can use double word read/write? */
|
|
char wdp_vendorunique2; /*49L*/
|
|
char wdp_capability; /*49H various capability bits */
|
|
short wdp_cap_validate; /*50 validation for above */
|
|
char wdp_vendorunique3; /*51L*/
|
|
char wdp_opiomode; /*51H PIO modes 0-2 */
|
|
char wdp_vendorunique4; /*52*/
|
|
char wdp_odmamode; /*52 old DMA modes, not in ATA-3 */
|
|
short wdp_atavalid; /*53 validation for newer fields */
|
|
short wdp_currcyls; /*54 */
|
|
short wdp_currheads; /*55 */
|
|
short wdp_currsectors; /*56 */
|
|
short wdp_currsize0; /*57 CHS size*/
|
|
short wdp_currsize1; /*58 CHS size*/
|
|
char wdp_currmultsect; /*59L */
|
|
char wdp_multsectvalid; /*59H */
|
|
int wdp_lbasize; /*60,61*/
|
|
short wdp_dmasword; /*62 obsolete in ATA-3 */
|
|
short wdp_dmamword; /*63 multiword DMA modes */
|
|
short wdp_eidepiomodes; /*64 advanced PIO modes */
|
|
short wdp_eidedmamin; /*65 fastest possible DMA timing */
|
|
short wdp_eidedmanorm; /*66 recommended DMA timing */
|
|
short wdp_eidepioblind; /*67 fastest possible blind PIO */
|
|
short wdp_eidepioacked; /*68 fastest possible IORDY PIO */
|
|
short wdp_reserved69; /*69*/
|
|
short wdp_reserved70; /*70*/
|
|
short wdp_reserved71; /*71*/
|
|
short wdp_reserved72; /*72*/
|
|
short wdp_reserved73; /*73*/
|
|
short wdp_reserved74; /*74*/
|
|
short wdp_queuelen; /*75*/
|
|
short wdp_reserved76; /*76*/
|
|
short wdp_reserved77; /*77*/
|
|
short wdp_reserved78; /*78*/
|
|
short wdp_reserved79; /*79*/
|
|
short wdp_versmaj; /*80*/
|
|
short wdp_versmin; /*81*/
|
|
short wdp_featsupp1; /*82*/
|
|
short wdp_featsupp2; /*83*/
|
|
short wdp_featsupp3; /*84*/
|
|
short wdp_featenab1; /*85*/
|
|
short wdp_featenab2; /*86*/
|
|
short wdp_featenab3; /*87*/
|
|
short wdp_udmamode; /*88 UltraDMA modes */
|
|
short wdp_erasetime; /*89*/
|
|
short wdp_enherasetime; /*90*/
|
|
short wdp_apmlevel; /*91*/
|
|
short wdp_reserved92[34]; /*92*/
|
|
short wdp_rmvcap; /*93*/
|
|
short wdp_securelevel; /*94*/
|
|
};
|
|
|
|
/*
|
|
* IDE DMA support.
|
|
* This is based on what is needed for the IDE DMA function of the Intel
|
|
* Triton chipset; hopefully it's general enough to be used for other
|
|
* chipsets as well.
|
|
*
|
|
* To use this:
|
|
* For each drive which you might want to do DMA on, call wdd_candma()
|
|
* to get a cookie. If it returns a null pointer, then the drive
|
|
* can't do DMA. Then call wdd_dmainit() to initialize the controller
|
|
* and drive. wdd_dmainit should leave PIO modes operational, though
|
|
* perhaps with suboptimal performance.
|
|
*
|
|
* Check the transfer by calling wdd_dmaverify(). The cookie is what
|
|
* you got before; vaddr is the virtual address of the buffer to be
|
|
* written; len is the length of the buffer; and direction is either
|
|
* B_READ or B_WRITE. This function verifies that the DMA hardware is
|
|
* capable of handling the request you've made.
|
|
*
|
|
* Setup the transfer by calling wdd_dmaprep(). This takes the same
|
|
* paramaters as wdd_dmaverify().
|
|
*
|
|
* Send a read/write DMA command to the drive.
|
|
*
|
|
* Call wdd_dmastart().
|
|
*
|
|
* Wait for an interrupt. Multi-sector transfers will only interrupt
|
|
* at the end of the transfer.
|
|
*
|
|
* Call wdd_dmadone(). It will return the status as defined by the
|
|
* WDDS_* constants below.
|
|
*/
|
|
struct wddma {
|
|
void *(*wdd_candma) /* returns a cookie if PCI */
|
|
(int iobase_wd, int ctlr, int unit);
|
|
int (*wdd_dmaverify) /* verify that request is DMA-able */
|
|
(void *cookie, char *vaddr, u_long len, int direction);
|
|
int (*wdd_dmaprep) /* prepare DMA hardware */
|
|
(void *cookie, char *vaddr, u_long len, int direction);
|
|
void (*wdd_dmastart) /* begin DMA transfer */
|
|
(void *cookie);
|
|
int (*wdd_dmadone) /* DMA transfer completed */
|
|
(void *cookie);
|
|
int (*wdd_dmastatus) /* return status of DMA */
|
|
(void *cookie);
|
|
int (*wdd_dmainit) /* initialize controller and drive */
|
|
(void *cookie,
|
|
struct wdparams *wp,
|
|
int(wdcmd)(int mode, void *wdinfo),
|
|
void *wdinfo);
|
|
int (*wdd_iobase) /* returns iobase address */
|
|
(void *cookie);
|
|
int (*wdd_altiobase) /* returns altiobase address */
|
|
(void *cookie);
|
|
};
|
|
|
|
/* logical status bits returned by wdd_dmastatus */
|
|
#define WDDS_ACTIVE 0x0001
|
|
#define WDDS_ERROR 0x0002
|
|
#define WDDS_INTERRUPT 0x0004
|
|
|
|
#define WDDS_BITS "\20\4interrupt\2error\1active"
|
|
|
|
/* defines for ATA timing modes */
|
|
#define WDDMA_GRPMASK 0xf8
|
|
#define WDDMA_MODEMASK 0x07
|
|
/* flow-controlled PIO modes */
|
|
#define WDDMA_PIO 0x10
|
|
#define WDDMA_PIO3 0x10
|
|
#define WDDMA_PIO4 0x11
|
|
/* multi-word DMA timing modes */
|
|
#define WDDMA_MDMA 0x20
|
|
#define WDDMA_MDMA0 0x20
|
|
#define WDDMA_MDMA1 0x21
|
|
#define WDDMA_MDMA2 0x22
|
|
|
|
/* Ultra DMA timing modes */
|
|
#define WDDMA_UDMA 0x40
|
|
#define WDDMA_UDMA0 0x40
|
|
#define WDDMA_UDMA1 0x41
|
|
#define WDDMA_UDMA2 0x42
|
|
|
|
#define Q_CMD640B 0x00000001 /* CMD640B quirk: serialize IDE channels */
|
|
void wdc_pci(int quirks);
|
|
|
|
extern struct wddma wddma[];
|
|
|
|
void wdintr(void *unit);
|
|
|
|
#endif /* _KERNEL */
|