360 lines
8.8 KiB
C
360 lines
8.8 KiB
C
/*
|
||
* refclock_trak - clock driver for the TRAK 8810 GPS Station Clock
|
||
*
|
||
* Tomoaki TSURUOKA <tsuruoka@nc.fukuoka-u.ac.jp>
|
||
* original version Dec, 1993
|
||
* revised version Sep, 1994 for ntp3.4e or later
|
||
*/
|
||
|
||
#ifdef HAVE_CONFIG_H
|
||
#include <config.h>
|
||
#endif
|
||
|
||
#if defined(REFCLOCK) && defined(CLOCK_TRAK) && defined(PPS)
|
||
|
||
#include "ntpd.h"
|
||
#include "ntp_io.h"
|
||
#include "ntp_refclock.h"
|
||
#include "ntp_stdlib.h"
|
||
#include "ntp_unixtime.h"
|
||
|
||
#include <stdio.h>
|
||
#include <ctype.h>
|
||
|
||
#ifdef HAVE_SYS_TERMIOS_H
|
||
# include <sys/termios.h>
|
||
#endif
|
||
#ifdef HAVE_SYS_PPSCLOCK_H
|
||
# include <sys/ppsclock.h>
|
||
#endif
|
||
|
||
/*
|
||
* This driver supports the TRAK 8810/8820 GPS Station Clock. The claimed
|
||
* accuracy at the 1-pps output is 200-300 ns relative to the broadcast
|
||
* signal; however, in most cases the actual accuracy is limited by the
|
||
* precision of the timecode and the latencies of the serial interface
|
||
* and operating system.
|
||
*
|
||
* For best accuracy, this radio requires the LDISC_ACTS line
|
||
* discipline, which captures a timestamp at the '*' on-time character
|
||
* of the timecode. Using this discipline the jitter is in the order of
|
||
* 1 ms and systematic error about 0.5 ms. If unavailable, the buffer
|
||
* timestamp is used, which is captured at the \r ending the timecode
|
||
* message. This introduces a systematic error of 23 character times, or
|
||
* about 24 ms at 9600 bps, together with a jitter well over 8 ms on Sun
|
||
* IPC-class machines.
|
||
*
|
||
* Using the memus, the radio should be set for 9600 bps, one stop bit
|
||
* and no parity. It should be set to operate in computer (no echo)
|
||
* mode. The timecode format includes neither the year nor leap-second
|
||
* warning. No provisions are included in this preliminary version of
|
||
* the driver to read and record detailed internal radio status.
|
||
*
|
||
* In operation, this driver sends a RQTS\r request to the radio at
|
||
* initialization in order to put it in continuous time output mode. The
|
||
* radio then sends the following message once each second:
|
||
*
|
||
* *RQTS U,ddd:hh:mm:ss.0,q<cr><lf>
|
||
*
|
||
* on-time = '*' * ddd = day of year
|
||
* hh:mm:ss = hours, minutes, seconds
|
||
* q = quality indicator (phase error), 0-6:
|
||
* 0 > 20 us
|
||
* 6 > 10 us
|
||
* 5 > 1 us
|
||
* 4 > 100 ns
|
||
* 3 > 10 ns
|
||
* 2 < 10 ns
|
||
*
|
||
* The alarm condition is indicated by '0' at Q, which means the radio
|
||
* has a phase error than 20 usec relative to the broadcast time. The
|
||
* absence of year, DST and leap-second warning in this format is also
|
||
* alarming.
|
||
*
|
||
* The continuous time mode is disabled using the RQTX<cr> request,
|
||
* following which the radio sends a RQTX DONE<cr><lf> response. In the
|
||
* normal mode, other control and status requests are effective,
|
||
* including the leap-second status request RQLS<cr>. The radio responds
|
||
* wtih RQLS yy,mm,dd<cr><lf>, where yy,mm,dd are the year, month and
|
||
* day. Presumably, this gives the epoch of the next leap second,
|
||
* RQLS 00,00,00 if none is specified in the GPS message. Specified in
|
||
* this form, the information is generally useless and is ignored by
|
||
* the driver.
|
||
*
|
||
* Fudge Factors
|
||
*
|
||
* There are no special fudge factors other than the generic.
|
||
*/
|
||
|
||
/*
|
||
* Interface definitions
|
||
*/
|
||
#define DEVICE "/dev/trak%d" /* device name and unit */
|
||
#define SPEED232 B9600 /* uart speed (9600 baud) */
|
||
#define PRECISION (-20) /* precision assumed (about 1 us) */
|
||
#define REFID "GPS\0" /* reference ID */
|
||
#define DESCRIPTION "TRACK 8810/8820 Station Clock" /* WRU */
|
||
|
||
#define LENTRAK 24 /* timecode length */
|
||
#define C_CTO "RQTS\r" /* start continuous time output */
|
||
|
||
/*
|
||
* Unit control structure
|
||
*/
|
||
struct trakunit {
|
||
int polled; /* poll message flag */
|
||
l_fp tstamp; /* timestamp of last poll */
|
||
};
|
||
|
||
/*
|
||
* Function prototypes
|
||
*/
|
||
static int trak_start P((int, struct peer *));
|
||
static void trak_shutdown P((int, struct peer *));
|
||
static void trak_receive P((struct recvbuf *));
|
||
static void trak_poll P((int, struct peer *));
|
||
|
||
/*
|
||
* Transfer vector
|
||
*/
|
||
struct refclock refclock_trak = {
|
||
trak_start, /* start up driver */
|
||
trak_shutdown, /* shut down driver */
|
||
trak_poll, /* transmit poll message */
|
||
noentry, /* not used (old trak_control) */
|
||
noentry, /* initialize driver (not used) */
|
||
noentry, /* not used (old trak_buginfo) */
|
||
NOFLAGS /* not used */
|
||
};
|
||
|
||
|
||
/*
|
||
* trak_start - open the devices and initialize data for processing
|
||
*/
|
||
static int
|
||
trak_start(
|
||
int unit,
|
||
struct peer *peer
|
||
)
|
||
{
|
||
register struct trakunit *up;
|
||
struct refclockproc *pp;
|
||
int fd;
|
||
char device[20];
|
||
|
||
/*
|
||
* Open serial port. The LDISC_ACTS line discipline inserts a
|
||
* timestamp following the "*" on-time character of the
|
||
* timecode.
|
||
*/
|
||
(void)sprintf(device, DEVICE, unit);
|
||
if (
|
||
#ifdef PPS
|
||
!(fd = refclock_open(device, SPEED232, LDISC_CLK))
|
||
#else
|
||
!(fd = refclock_open(device, SPEED232, 0))
|
||
#endif /* PPS */
|
||
)
|
||
return (0);
|
||
|
||
/*
|
||
* Allocate and initialize unit structure
|
||
*/
|
||
if (!(up = (struct trakunit *)
|
||
emalloc(sizeof(struct trakunit)))) {
|
||
(void) close(fd);
|
||
return (0);
|
||
}
|
||
memset((char *)up, 0, sizeof(struct trakunit));
|
||
pp = peer->procptr;
|
||
pp->io.clock_recv = trak_receive;
|
||
pp->io.srcclock = (caddr_t)peer;
|
||
pp->io.datalen = 0;
|
||
pp->io.fd = fd;
|
||
if (!io_addclock(&pp->io)) {
|
||
(void) close(fd);
|
||
free(up);
|
||
return (0);
|
||
}
|
||
pp->unitptr = (caddr_t)up;
|
||
|
||
/*
|
||
* Initialize miscellaneous variables
|
||
*/
|
||
peer->precision = PRECISION;
|
||
pp->clockdesc = DESCRIPTION;
|
||
memcpy((char *)&pp->refid, REFID, 4);
|
||
up->polled = 0;
|
||
|
||
/*
|
||
* Start continuous time output. If something breaks, fold the
|
||
* tent and go home.
|
||
*/
|
||
if (write(pp->io.fd, C_CTO, sizeof(C_CTO)) != sizeof(C_CTO)) {
|
||
refclock_report(peer, CEVNT_FAULT);
|
||
(void) close(fd);
|
||
free(up);
|
||
return (0);
|
||
}
|
||
return (1);
|
||
}
|
||
|
||
|
||
/*
|
||
* trak_shutdown - shut down the clock
|
||
*/
|
||
static void
|
||
trak_shutdown(
|
||
int unit,
|
||
struct peer *peer
|
||
)
|
||
{
|
||
register struct trakunit *up;
|
||
struct refclockproc *pp;
|
||
|
||
pp = peer->procptr;
|
||
up = (struct trakunit *)pp->unitptr;
|
||
io_closeclock(&pp->io);
|
||
free(up);
|
||
}
|
||
|
||
|
||
/*
|
||
* trak_receive - receive data from the serial interface
|
||
*/
|
||
static void
|
||
trak_receive(
|
||
struct recvbuf *rbufp
|
||
)
|
||
{
|
||
register struct trakunit *up;
|
||
struct refclockproc *pp;
|
||
struct peer *peer;
|
||
l_fp trtmp;
|
||
char *dpt, *dpend;
|
||
char qchar;
|
||
#ifdef PPS
|
||
struct ppsclockev ppsev;
|
||
int request;
|
||
#ifdef HAVE_CIOGETEV
|
||
request = CIOGETEV;
|
||
#endif
|
||
#ifdef HAVE_TIOCGPPSEV
|
||
request = TIOCGPPSEV;
|
||
#endif
|
||
#endif /* PPS */
|
||
|
||
/*
|
||
* Initialize pointers and read the timecode and timestamp. We
|
||
* then chuck out everything, including runts, except one
|
||
* message each poll interval.
|
||
*/
|
||
peer = (struct peer *)rbufp->recv_srcclock;
|
||
pp = peer->procptr;
|
||
up = (struct trakunit *)pp->unitptr;
|
||
pp->lencode = refclock_gtlin(rbufp, pp->a_lastcode, BMAX,
|
||
&pp->lastrec);
|
||
|
||
/*
|
||
* We get a buffer and timestamp following the '*' on-time
|
||
* character. If a valid timestamp, we use that in place of the
|
||
* buffer timestamp and edit out the timestamp for prettyprint
|
||
* billboards.
|
||
*/
|
||
dpt = pp->a_lastcode;
|
||
dpend = dpt + pp->lencode;
|
||
if (*dpt == '*' && buftvtots(dpt + 1, &trtmp)) {
|
||
if (trtmp.l_i == pp->lastrec.l_i || trtmp.l_i ==
|
||
pp->lastrec.l_i + 1) {
|
||
pp->lastrec = trtmp;
|
||
dpt += 9;
|
||
while (dpt < dpend) {
|
||
*(dpt - 8) = *dpt;
|
||
++dpt;
|
||
}
|
||
}
|
||
}
|
||
if (up->polled == 0) return;
|
||
up->polled = 0;
|
||
#ifndef PPS
|
||
get_systime(&up->tstamp);
|
||
#endif
|
||
record_clock_stats(&peer->srcadr, pp->a_lastcode);
|
||
#ifdef DEBUG
|
||
if (debug)
|
||
printf("trak: timecode %d %s\n", pp->lencode,
|
||
pp->a_lastcode);
|
||
#endif
|
||
|
||
/*
|
||
* We get down to business, check the timecode format and decode
|
||
* its contents. If the timecode has invalid length or is not in
|
||
* proper format, we declare bad format and exit.
|
||
*/
|
||
if (pp->lencode < LENTRAK) {
|
||
refclock_report(peer, CEVNT_BADREPLY);
|
||
return;
|
||
}
|
||
|
||
/*
|
||
* Timecode format: "*RQTS U,ddd:hh:mm:ss.0,q"
|
||
*/
|
||
if (sscanf(pp->a_lastcode, "*RQTS U,%3d:%2d:%2d:%2d.0,%c",
|
||
&pp->day, &pp->hour, &pp->minute, &pp->second, &qchar) != 5) {
|
||
refclock_report(peer, CEVNT_BADREPLY);
|
||
return;
|
||
}
|
||
|
||
/*
|
||
* Decode quality and leap characters. If unsynchronized, set
|
||
* the leap bits accordingly and exit.
|
||
*/
|
||
if (qchar == '0') {
|
||
pp->leap = LEAP_NOTINSYNC;
|
||
return;
|
||
}
|
||
#ifdef PPS
|
||
if(ioctl(fdpps,request,(caddr_t) &ppsev) >=0) {
|
||
ppsev.tv.tv_sec += (u_int32) JAN_1970;
|
||
TVTOTS(&ppsev.tv,&up->tstamp);
|
||
}
|
||
#endif /* PPS */
|
||
/* record the last ppsclock event time stamp */
|
||
pp->lastrec = up->tstamp;
|
||
if (!refclock_process(pp)) {
|
||
refclock_report(peer, CEVNT_BADTIME);
|
||
return;
|
||
}
|
||
pp->lastref = pp->lastrec;
|
||
refclock_receive(peer);
|
||
}
|
||
|
||
|
||
/*
|
||
* trak_poll - called by the transmit procedure
|
||
*/
|
||
static void
|
||
trak_poll(
|
||
int unit,
|
||
struct peer *peer
|
||
)
|
||
{
|
||
register struct trakunit *up;
|
||
struct refclockproc *pp;
|
||
|
||
/*
|
||
* We don't really do anything here, except arm the receiving
|
||
* side to capture a sample and check for timeouts.
|
||
*/
|
||
pp = peer->procptr;
|
||
up = (struct trakunit *)pp->unitptr;
|
||
if (up->polled)
|
||
refclock_report(peer, CEVNT_TIMEOUT);
|
||
pp->polls++;
|
||
up->polled = 1;
|
||
}
|
||
|
||
#else
|
||
int refclock_trak_bs;
|
||
#endif /* REFCLOCK */
|