Adrian Chadd 9a4cf01f45 Add Atheros AR1111 support to the HAL. ... This seems to probe/attach as an AR9485 and thus nothing else besides adding the device id seems to be required. ath0: <Atheros AR1111> mem 0xf4800000-0xf487ffff irq 19 at device 0.0 on pci5 ath0: [HT] enabling HT modes ath0: [HT] enabling short-GI in 20MHz mode ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 RX streams; 1 TX streams ath0: AR9485 mac 576.1 RF5110 phy 1926.8 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 The NIC I have here is a 1 antenna, 2GHz only device. Thankyou to Jim Thompson <jim@netgate.com> for the AR1111 NIC. Tested: * AR1111 (pretending not to be an AR9485, but failing miserably); STA mode with powersave. Relnotes: yes Sponsored by: Netgate		2014-05-05 07:58:05 +00:00
..
altq/altq
dev	Add Atheros AR1111 support to the HAL.	2014-05-05 07:58:05 +00:00
ia64/libuwx
ipfilter/netinet	Implement the final missing sysctls by moving ipf_auth_softc_t from	2014-04-07 19:32:56 +00:00
libfdt
ngatm
octeon-sdk
rdma/krping
v4l
x86emu
xz-embedded	MFV r262756:	2014-03-05 01:33:15 +00:00