freebsd-nq/sys/powerpc/include/spr.h
Leandro Lupori 6a32dae2b7 Fix powerpc and powerpcspe builds
This change fixes 32-bit PowerPC builds, that r367390 broke
(shift count >= width of type).
2020-11-05 20:18:00 +00:00

924 lines
46 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* $NetBSD: spr.h,v 1.25 2002/08/14 15:38:40 matt Exp $
* $FreeBSD$
*/
#ifndef _POWERPC_SPR_H_
#define _POWERPC_SPR_H_
#ifndef _LOCORE
#define mtspr(reg, val) \
__asm __volatile("mtspr %0,%1" : : "K"(reg), "r"(val))
#define mfspr(reg) \
( { register_t val; \
__asm __volatile("mfspr %0,%1" : "=r"(val) : "K"(reg)); \
val; } )
#ifndef __powerpc64__
/* The following routines allow manipulation of the full 64-bit width
* of SPRs on 64 bit CPUs in bridge mode */
#define mtspr64(reg,valhi,vallo,scratch) \
__asm __volatile(" \
mfmsr %0; \
insrdi %0,%5,1,0; \
mtmsrd %0; \
isync; \
\
sld %1,%1,%4; \
or %1,%1,%2; \
mtspr %3,%1; \
srd %1,%1,%4; \
\
clrldi %0,%0,1; \
mtmsrd %0; \
isync;" \
: "=r"(scratch), "=r"(valhi) : "r"(vallo), "K"(reg), "r"(32), "r"(1))
#define mfspr64upper(reg,scratch) \
( { register_t val; \
__asm __volatile(" \
mfmsr %0; \
insrdi %0,%4,1,0; \
mtmsrd %0; \
isync; \
\
mfspr %1,%2; \
srd %1,%1,%3; \
\
clrldi %0,%0,1; \
mtmsrd %0; \
isync;" \
: "=r"(scratch), "=r"(val) : "K"(reg), "r"(32), "r"(1)); \
val; } )
#endif
#endif /* _LOCORE */
/*
* Special Purpose Register declarations.
*
* The first column in the comments indicates which PowerPC
* architectures the SPR is valid on - 4 for 4xx series,
* 6 for 6xx/7xx series and 8 for 8xx and 8xxx series.
*/
#define SPR_MQ 0x000 /* .6. 601 MQ register */
#define SPR_XER 0x001 /* 468 Fixed Point Exception Register */
#define SPR_DSCR 0x003 /* .6. Data Stream Control Register (Unprivileged) */
#define SPR_RTCU_R 0x004 /* .6. 601 RTC Upper - Read */
#define SPR_RTCL_R 0x005 /* .6. 601 RTC Lower - Read */
#define SPR_LR 0x008 /* 468 Link Register */
#define SPR_CTR 0x009 /* 468 Count Register */
#define SPR_DSCRP 0x011 /* Data Stream Control Register (Privileged) */
#define SPR_DSISR 0x012 /* .68 DSI exception source */
#define DSISR_DIRECT 0x80000000 /* Direct-store error exception */
#define DSISR_NOTFOUND 0x40000000 /* Translation not found */
#define DSISR_PROTECT 0x08000000 /* Memory access not permitted */
#define DSISR_INVRX 0x04000000 /* Reserve-indexed insn direct-store access */
#define DSISR_STORE 0x02000000 /* Store operation */
#define DSISR_DABR 0x00400000 /* DABR match */
#define DSISR_SEGMENT 0x00200000 /* XXX; not in 6xx PEM */
#define DSISR_EAR 0x00100000 /* eciwx/ecowx && EAR[E] == 0 */
#define DSISR_MC_UE_DEFERRED 0x00008000 /* UE deferred error */
#define DSISR_MC_UE_TABLEWALK 0x00004000 /* UE deferred error during tablewalk */
#define DSISR_MC_DERAT_MULTIHIT 0x00000800 /* D-ERAT multi-hit */
#define DSISR_MC_TLB_MULTIHIT 0x00000400 /* TLB multi-hit */
#define DSISR_MC_TLBIE_ERR 0x00000200 /* TLBIE or TLBIEL programming error */
#define DSISR_MC_SLB_PARITY 0x00000100 /* SLB parity error */
#define DSISR_MC_SLB_MULTIHIT 0x00000080 /* SLB Multi-hit detected (D-side) */
#define DSISR_MC_BAD_REAL_LD 0x00000040 /* Bad real address for load. */
#define DSISR_MC_BAD_ADDR 0x00000020 /* Bad address for load or store tablewalk */
#define SPR_DAR 0x013 /* .68 Data Address Register */
#define SPR_RTCU_W 0x014 /* .6. 601 RTC Upper - Write */
#define SPR_RTCL_W 0x015 /* .6. 601 RTC Lower - Write */
#define SPR_DEC 0x016 /* .68 DECrementer register */
#define SPR_SDR1 0x019 /* .68 Page table base address register */
#define SPR_SRR0 0x01a /* 468 Save/Restore Register 0 */
#define SPR_SRR1 0x01b /* 468 Save/Restore Register 1 */
#define SRR1_ISI_PFAULT 0x40000000 /* ISI page not found */
#define SRR1_ISI_NOEXECUTE 0x10000000 /* Memory marked no-execute */
#define SRR1_ISI_PP 0x08000000 /* PP bits forbid access */
#define SRR1_MCHK_DATA 0x00200000 /* Machine check data in DSISR */
#define SRR1_MCHK_IFETCH_M 0x081c0000 /* Machine check instr fetch mask */
#define SRR1_MCHK_IFETCH_SLBMH 0x000c0000 /* SLB multihit */
#define SPR_CFAR 0x01c /* Come From Address Register */
#define SPR_AMR 0x01d /* Authority Mask Register */
#define SPR_PID 0x030 /* 4.. Process ID */
#define SPR_DECAR 0x036 /* ..8 Decrementer auto reload */
#define SPR_IAMR 0x03d /* Instr. Authority Mask Reg */
#define SPR_EIE 0x050 /* ..8 Exception Interrupt ??? */
#define SPR_EID 0x051 /* ..8 Exception Interrupt ??? */
#define SPR_NRI 0x052 /* ..8 Exception Interrupt ??? */
#define SPR_FSCR 0x099 /* Facility Status and Control Register */
#define FSCR_IC_MASK 0xFF00000000000000ULL /* FSCR[0:7] is Interrupt Cause */
#define FSCR_IC_FP 0x0000000000000000ULL /* FP unavailable */
#define FSCR_IC_VSX 0x0100000000000000ULL /* VSX unavailable */
#define FSCR_IC_DSCR 0x0200000000000000ULL /* Access to the DSCR at SPRs 3 or 17 */
#define FSCR_IC_PM 0x0300000000000000ULL /* Read or write access of a Performance Monitor SPR in group A */
#define FSCR_IC_BHRB 0x0400000000000000ULL /* Execution of a BHRB Instruction */
#define FSCR_IC_HTM 0x0500000000000000ULL /* Access to a Transactional Memory */
/* Reserved 0x0600000000000000ULL */
#define FSCR_IC_EBB 0x0700000000000000ULL /* Access to Event-Based Branch */
#define FSCR_IC_TAR 0x0800000000000000ULL /* Access to Target Address Register */
#define FSCR_IC_STOP 0x0900000000000000ULL /* Access to the 'stop' instruction in privileged non-hypervisor state */
#define FSCR_IC_MSG 0x0A00000000000000ULL /* Access to 'msgsndp' or 'msgclrp' instructions */
#define FSCR_IC_LM 0x0A00000000000000ULL /* Access to load monitored facility */
#define FSCR_IC_SCV 0x0C00000000000000ULL /* Execution of a 'scv' instruction */
#define FSCR_SCV 0x0000000000001000 /* scv instruction available */
#define FSCR_LM 0x0000000000000800 /* Load monitored facilities available */
#define FSCR_MSGP 0x0000000000000400 /* msgsndp and SPRs available */
#define FSCR_TAR 0x0000000000000100 /* TAR register available */
#define FSCR_EBB 0x0000000000000080 /* Event-based branch available */
#define FSCR_DSCR 0x0000000000000004 /* DSCR available in PR state */
#define SPR_UAMOR 0x09d /* User Authority Mask Override Register */
#define SPR_DPDES 0x0b0 /* .6. Directed Privileged Doorbell Exception State Register */
#define SPR_USPRG0 0x100 /* 4.8 User SPR General 0 */
#define SPR_VRSAVE 0x100 /* .6. AltiVec VRSAVE */
#define SPR_SPRG0 0x110 /* 468 SPR General 0 */
#define SPR_SPRG1 0x111 /* 468 SPR General 1 */
#define SPR_SPRG2 0x112 /* 468 SPR General 2 */
#define SPR_SPRG3 0x113 /* 468 SPR General 3 */
#define SPR_SPRG4 0x114 /* 4.8 SPR General 4 */
#define SPR_SPRG5 0x115 /* 4.8 SPR General 5 */
#define SPR_SPRG6 0x116 /* 4.8 SPR General 6 */
#define SPR_SPRG7 0x117 /* 4.8 SPR General 7 */
#define SPR_SCOMC 0x114 /* ... SCOM Address Register (970) */
#define SPR_SCOMD 0x115 /* ... SCOM Data Register (970) */
#define SPR_ASR 0x118 /* ... Address Space Register (PPC64) */
#define SPR_EAR 0x11a /* .68 External Access Register */
#define SPR_PVR 0x11f /* 468 Processor Version Register */
#define MPC601 0x0001
#define MPC603 0x0003
#define MPC604 0x0004
#define MPC602 0x0005
#define MPC603e 0x0006
#define MPC603ev 0x0007
#define MPC750 0x0008
#define MPC750CL 0x7000 /* Nintendo Wii's Broadway */
#define MPC604ev 0x0009
#define MPC7400 0x000c
#define MPC620 0x0014
#define IBM403 0x0020
#define IBM401A1 0x0021
#define IBM401B2 0x0022
#define IBM401C2 0x0023
#define IBM401D2 0x0024
#define IBM401E2 0x0025
#define IBM401F2 0x0026
#define IBM401G2 0x0027
#define IBMRS64II 0x0033
#define IBMRS64III 0x0034
#define IBMPOWER4 0x0035
#define IBMRS64III_2 0x0036
#define IBMRS64IV 0x0037
#define IBMPOWER4PLUS 0x0038
#define IBM970 0x0039
#define IBMPOWER5 0x003a
#define IBMPOWER5PLUS 0x003b
#define IBM970FX 0x003c
#define IBMPOWER6 0x003e
#define IBMPOWER7 0x003f
#define IBMPOWER3 0x0040
#define IBMPOWER3PLUS 0x0041
#define IBM970MP 0x0044
#define IBM970GX 0x0045
#define IBMPOWERPCA2 0x0049
#define IBMPOWER7PLUS 0x004a
#define IBMPOWER8E 0x004b
#define IBMPOWER8NVL 0x004c
#define IBMPOWER8 0x004d
#define IBMPOWER9 0x004e
#define MPC860 0x0050
#define IBMCELLBE 0x0070
#define MPC8240 0x0081
#define PA6T 0x0090
#define IBM405GP 0x4011
#define IBM405L 0x4161
#define IBM750FX 0x7000
#define MPC745X_P(v) ((v & 0xFFF8) == 0x8000)
#define MPC7450 0x8000
#define MPC7455 0x8001
#define MPC7457 0x8002
#define MPC7447A 0x8003
#define MPC7448 0x8004
#define MPC7410 0x800c
#define MPC8245 0x8081
#define FSL_E500v1 0x8020
#define FSL_E500v2 0x8021
#define FSL_E500mc 0x8023
#define FSL_E5500 0x8024
#define FSL_E6500 0x8040
#define FSL_E300C1 0x8083
#define FSL_E300C2 0x8084
#define FSL_E300C3 0x8085
#define FSL_E300C4 0x8086
#define LPCR_PECE_WAKESET (LPCR_PECE_EXT | LPCR_PECE_DECR | LPCR_PECE_ME)
#define SPR_DBSR 0x130 /* ..8 Debug Status Register */
#define DBSR_IDE 0x80000000 /* Imprecise debug event. */
#define DBSR_UDE 0x40000000 /* Unconditional debug event. */
#define DBSR_MRR 0x30000000 /* Most recent Reset (mask). */
#define DBSR_ICMP 0x08000000 /* Instr. complete debug event. */
#define DBSR_BRT 0x04000000 /* Branch taken debug event. */
#define DBSR_IRPT 0x02000000 /* Interrupt taken debug event. */
#define DBSR_TRAP 0x01000000 /* Trap instr. debug event. */
#define DBSR_IAC1 0x00800000 /* Instr. address compare #1. */
#define DBSR_IAC2 0x00400000 /* Instr. address compare #2. */
#define DBSR_IAC3 0x00200000 /* Instr. address compare #3. */
#define DBSR_IAC4 0x00100000 /* Instr. address compare #4. */
#define DBSR_DAC1R 0x00080000 /* Data addr. read compare #1. */
#define DBSR_DAC1W 0x00040000 /* Data addr. write compare #1. */
#define DBSR_DAC2R 0x00020000 /* Data addr. read compare #2. */
#define DBSR_DAC2W 0x00010000 /* Data addr. write compare #2. */
#define DBSR_RET 0x00008000 /* Return debug event. */
#define SPR_EPCR 0x133
#define EPCR_EXTGS 0x80000000
#define EPCR_DTLBGS 0x40000000
#define EPCR_ITLBGS 0x20000000
#define EPCR_DSIGS 0x10000000
#define EPCR_ISIGS 0x08000000
#define EPCR_DUVGS 0x04000000
#define EPCR_ICM 0x02000000
#define EPCR_GICMGS 0x01000000
#define EPCR_DGTMI 0x00800000
#define EPCR_DMIUH 0x00400000
#define EPCR_PMGS 0x00200000
#define SPR_DBCR0 0x134 /* ..8 Debug Control Register 0 */
#define SPR_DBCR1 0x135 /* ..8 Debug Control Register 1 */
#define SPR_IAC1 0x138 /* ..8 Instruction Address Compare 1 */
#define SPR_IAC2 0x139 /* ..8 Instruction Address Compare 2 */
#define SPR_IAC3 0x13a /* ..8 Instruction Address Compare 3 */
#define SPR_IAC4 0x13b /* ..8 Instruction Address Compare 4 */
#define SPR_HSRR0 0x13a
#define SPR_HSRR1 0x13b
#define SPR_DAC1 0x13c /* ..8 Data Address Compare 1 */
#define SPR_DAC2 0x13d /* ..8 Data Address Compare 2 */
#define SPR_DVC1 0x13e /* ..8 Data Value Compare 1 */
#define SPR_DVC2 0x13f /* ..8 Data Value Compare 2 */
#define SPR_LPCR 0x13e /* .6. Logical Partitioning Control */
#define LPCR_LPES 0x008 /* Bit 60 */
#define LPCR_HVICE 0x002 /* Hypervisor Virtualization Interrupt (Arch 3.0) */
#define LPCR_ILE (1ULL << 25) /* Interrupt Little-Endian (ISA 2.07) */
#define LPCR_UPRT (1ULL << 22) /* Use Process Table (ISA 3) */
#define LPCR_HR (1ULL << 20) /* Host Radix mode */
#define LPCR_PECE_DRBL (1ULL << 16) /* Directed Privileged Doorbell */
#define LPCR_PECE_HDRBL (1ULL << 15) /* Directed Hypervisor Doorbell */
#define LPCR_PECE_EXT (1ULL << 14) /* External exceptions */
#define LPCR_PECE_DECR (1ULL << 13) /* Decrementer exceptions */
#define LPCR_PECE_ME (1ULL << 12) /* Machine Check and Hypervisor */
/* Maintenance exceptions */
#define SPR_LPID 0x13f /* .6. Logical Partitioning Control */
#define SPR_HMER 0x150 /* Hypervisor Maintenance Exception Register */
#define SPR_HMEER 0x151 /* Hypervisor Maintenance Exception Enable Register */
#define SPR_AMOR 0x15d /* Authority Mask Override Register */
#define SPR_TIR 0x1be /* .6. Thread Identification Register */
#define SPR_PTCR 0x1d0 /* Partition Table Control Register */
#define SPR_SPEFSCR 0x200 /* ..8 Signal Processing Engine FSCR. */
#define SPEFSCR_SOVH 0x80000000
#define SPEFSCR_OVH 0x40000000
#define SPEFSCR_FGH 0x20000000
#define SPEFSCR_FXH 0x10000000
#define SPEFSCR_FINVH 0x08000000
#define SPEFSCR_FDBZH 0x04000000
#define SPEFSCR_FUNFH 0x02000000
#define SPEFSCR_FOVFH 0x01000000
#define SPEFSCR_FINXS 0x00200000
#define SPEFSCR_FINVS 0x00100000
#define SPEFSCR_FDBZS 0x00080000
#define SPEFSCR_FUNFS 0x00040000
#define SPEFSCR_FOVFS 0x00020000
#define SPEFSCR_SOV 0x00008000
#define SPEFSCR_OV 0x00004000
#define SPEFSCR_FG 0x00002000
#define SPEFSCR_FX 0x00001000
#define SPEFSCR_FINV 0x00000800
#define SPEFSCR_FDBZ 0x00000400
#define SPEFSCR_FUNF 0x00000200
#define SPEFSCR_FOVF 0x00000100
#define SPEFSCR_FINXE 0x00000040
#define SPEFSCR_FINVE 0x00000020
#define SPEFSCR_FDBZE 0x00000010
#define SPEFSCR_FUNFE 0x00000008
#define SPEFSCR_FOVFE 0x00000004
#define SPEFSCR_FRMC_M 0x00000003
#define SPR_IBAT0U 0x210 /* .6. Instruction BAT Reg 0 Upper */
#define SPR_IBAT0L 0x211 /* .6. Instruction BAT Reg 0 Lower */
#define SPR_IBAT1U 0x212 /* .6. Instruction BAT Reg 1 Upper */
#define SPR_IBAT1L 0x213 /* .6. Instruction BAT Reg 1 Lower */
#define SPR_IBAT2U 0x214 /* .6. Instruction BAT Reg 2 Upper */
#define SPR_IBAT2L 0x215 /* .6. Instruction BAT Reg 2 Lower */
#define SPR_IBAT3U 0x216 /* .6. Instruction BAT Reg 3 Upper */
#define SPR_IBAT3L 0x217 /* .6. Instruction BAT Reg 3 Lower */
#define SPR_DBAT0U 0x218 /* .6. Data BAT Reg 0 Upper */
#define SPR_DBAT0L 0x219 /* .6. Data BAT Reg 0 Lower */
#define SPR_DBAT1U 0x21a /* .6. Data BAT Reg 1 Upper */
#define SPR_DBAT1L 0x21b /* .6. Data BAT Reg 1 Lower */
#define SPR_DBAT2U 0x21c /* .6. Data BAT Reg 2 Upper */
#define SPR_DBAT2L 0x21d /* .6. Data BAT Reg 2 Lower */
#define SPR_DBAT3U 0x21e /* .6. Data BAT Reg 3 Upper */
#define SPR_DBAT3L 0x21f /* .6. Data BAT Reg 3 Lower */
#define SPR_IC_CST 0x230 /* ..8 Instruction Cache CSR */
#define IC_CST_IEN 0x80000000 /* I cache is ENabled (RO) */
#define IC_CST_CMD_INVALL 0x0c000000 /* I cache invalidate all */
#define IC_CST_CMD_UNLOCKALL 0x0a000000 /* I cache unlock all */
#define IC_CST_CMD_UNLOCK 0x08000000 /* I cache unlock block */
#define IC_CST_CMD_LOADLOCK 0x06000000 /* I cache load & lock block */
#define IC_CST_CMD_DISABLE 0x04000000 /* I cache disable */
#define IC_CST_CMD_ENABLE 0x02000000 /* I cache enable */
#define IC_CST_CCER1 0x00200000 /* I cache error type 1 (RO) */
#define IC_CST_CCER2 0x00100000 /* I cache error type 2 (RO) */
#define IC_CST_CCER3 0x00080000 /* I cache error type 3 (RO) */
#define SPR_IBAT4U 0x230 /* .6. Instruction BAT Reg 4 Upper */
#define SPR_IC_ADR 0x231 /* ..8 Instruction Cache Address */
#define SPR_IBAT4L 0x231 /* .6. Instruction BAT Reg 4 Lower */
#define SPR_IC_DAT 0x232 /* ..8 Instruction Cache Data */
#define SPR_IBAT5U 0x232 /* .6. Instruction BAT Reg 5 Upper */
#define SPR_IBAT5L 0x233 /* .6. Instruction BAT Reg 5 Lower */
#define SPR_IBAT6U 0x234 /* .6. Instruction BAT Reg 6 Upper */
#define SPR_IBAT6L 0x235 /* .6. Instruction BAT Reg 6 Lower */
#define SPR_IBAT7U 0x236 /* .6. Instruction BAT Reg 7 Upper */
#define SPR_IBAT7L 0x237 /* .6. Instruction BAT Reg 7 Lower */
#define SPR_DC_CST 0x230 /* ..8 Data Cache CSR */
#define DC_CST_DEN 0x80000000 /* D cache ENabled (RO) */
#define DC_CST_DFWT 0x40000000 /* D cache Force Write-Thru (RO) */
#define DC_CST_LES 0x20000000 /* D cache Little Endian Swap (RO) */
#define DC_CST_CMD_FLUSH 0x0e000000 /* D cache invalidate all */
#define DC_CST_CMD_INVALL 0x0c000000 /* D cache invalidate all */
#define DC_CST_CMD_UNLOCKALL 0x0a000000 /* D cache unlock all */
#define DC_CST_CMD_UNLOCK 0x08000000 /* D cache unlock block */
#define DC_CST_CMD_CLRLESWAP 0x07000000 /* D cache clr little-endian swap */
#define DC_CST_CMD_LOADLOCK 0x06000000 /* D cache load & lock block */
#define DC_CST_CMD_SETLESWAP 0x05000000 /* D cache set little-endian swap */
#define DC_CST_CMD_DISABLE 0x04000000 /* D cache disable */
#define DC_CST_CMD_CLRFWT 0x03000000 /* D cache clear forced write-thru */
#define DC_CST_CMD_ENABLE 0x02000000 /* D cache enable */
#define DC_CST_CMD_SETFWT 0x01000000 /* D cache set forced write-thru */
#define DC_CST_CCER1 0x00200000 /* D cache error type 1 (RO) */
#define DC_CST_CCER2 0x00100000 /* D cache error type 2 (RO) */
#define DC_CST_CCER3 0x00080000 /* D cache error type 3 (RO) */
#define SPR_DBAT4U 0x238 /* .6. Data BAT Reg 4 Upper */
#define SPR_DC_ADR 0x231 /* ..8 Data Cache Address */
#define SPR_DBAT4L 0x239 /* .6. Data BAT Reg 4 Lower */
#define SPR_DC_DAT 0x232 /* ..8 Data Cache Data */
#define SPR_DBAT5U 0x23a /* .6. Data BAT Reg 5 Upper */
#define SPR_DBAT5L 0x23b /* .6. Data BAT Reg 5 Lower */
#define SPR_DBAT6U 0x23c /* .6. Data BAT Reg 6 Upper */
#define SPR_DBAT6L 0x23d /* .6. Data BAT Reg 6 Lower */
#define SPR_DBAT7U 0x23e /* .6. Data BAT Reg 7 Upper */
#define SPR_DBAT7L 0x23f /* .6. Data BAT Reg 7 Lower */
#define SPR_SPRG8 0x25c /* ..8 SPR General 8 */
#define SPR_MI_CTR 0x310 /* ..8 IMMU control */
#define Mx_CTR_GPM 0x80000000 /* Group Protection Mode */
#define Mx_CTR_PPM 0x40000000 /* Page Protection Mode */
#define Mx_CTR_CIDEF 0x20000000 /* Cache-Inhibit DEFault */
#define MD_CTR_WTDEF 0x20000000 /* Write-Through DEFault */
#define Mx_CTR_RSV4 0x08000000 /* Reserve 4 TLB entries */
#define MD_CTR_TWAM 0x04000000 /* TableWalk Assist Mode */
#define Mx_CTR_PPCS 0x02000000 /* Priv/user state compare mode */
#define Mx_CTR_TLB_INDX 0x000001f0 /* TLB index mask */
#define Mx_CTR_TLB_INDX_BITPOS 8 /* TLB index shift */
#define SPR_MI_AP 0x312 /* ..8 IMMU access protection */
#define Mx_GP_SUPER(n) (0 << (2*(15-(n)))) /* access is supervisor */
#define Mx_GP_PAGE (1 << (2*(15-(n)))) /* access is page protect */
#define Mx_GP_SWAPPED (2 << (2*(15-(n)))) /* access is swapped */
#define Mx_GP_USER (3 << (2*(15-(n)))) /* access is user */
#define SPR_MI_EPN 0x313 /* ..8 IMMU effective number */
#define Mx_EPN_EPN 0xfffff000 /* Effective Page Number mask */
#define Mx_EPN_EV 0x00000020 /* Entry Valid */
#define Mx_EPN_ASID 0x0000000f /* Address Space ID */
#define SPR_MI_TWC 0x315 /* ..8 IMMU tablewalk control */
#define MD_TWC_L2TB 0xfffff000 /* Level-2 Tablewalk Base */
#define Mx_TWC_APG 0x000001e0 /* Access Protection Group */
#define Mx_TWC_G 0x00000010 /* Guarded memory */
#define Mx_TWC_PS 0x0000000c /* Page Size (L1) */
#define MD_TWC_WT 0x00000002 /* Write-Through */
#define Mx_TWC_V 0x00000001 /* Entry Valid */
#define SPR_MI_RPN 0x316 /* ..8 IMMU real (phys) page number */
#define Mx_RPN_RPN 0xfffff000 /* Real Page Number */
#define Mx_RPN_PP 0x00000ff0 /* Page Protection */
#define Mx_RPN_SPS 0x00000008 /* Small Page Size */
#define Mx_RPN_SH 0x00000004 /* SHared page */
#define Mx_RPN_CI 0x00000002 /* Cache Inhibit */
#define Mx_RPN_V 0x00000001 /* Valid */
#define SPR_MD_CTR 0x318 /* ..8 DMMU control */
#define SPR_M_CASID 0x319 /* ..8 CASID */
#define M_CASID 0x0000000f /* Current AS Id */
#define SPR_MD_AP 0x31a /* ..8 DMMU access protection */
#define SPR_MD_EPN 0x31b /* ..8 DMMU effective number */
#define SPR_MMCRA 0x312 /* ... Monitor Mode Control Register A */
#define SPR_PMC1 0x313 /* ... PMC 1 */
#define SPR_PMC2 0x314 /* ... PMC 2 */
#define SPR_PMC3 0x315 /* ... PMC 3 */
#define SPR_PMC4 0x316 /* ... PMC 4 */
#define SPR_PMC5 0x317 /* ... PMC 5 */
#define SPR_PMC6 0x318 /* ... PMC 6 */
#define SPR_PMC7 0x319 /* ... PMC 7 */
#define SPR_PMC8 0x31a /* ... PMC 8 */
#define SPR_MMCR0 0x31b /* ... Monitor Mode Control Register 0 */
#define SPR_MMCR0_FC 0x80000000 /* Freeze counters */
#define SPR_MMCR0_FCS 0x40000000 /* Freeze counters in supervisor mode */
#define SPR_MMCR0_FCP 0x20000000 /* Freeze counters in user mode */
#define SPR_MMCR0_FCM1 0x10000000 /* Freeze counters when mark=1 */
#define SPR_MMCR0_FCM0 0x08000000 /* Freeze counters when mark=0 */
#define SPR_MMCR0_PMXE 0x04000000 /* Enable PM interrupt */
#define SPR_MMCR0_PMAE 0x04000000 /* PM Alert Enable */
#define SPR_MMCR0_FCECE 0x02000000 /* Freeze counters after event */
#define SPR_MMCR0_TBSEL_15 0x01800000 /* Count bit 15 of TBL */
#define SPR_MMCR0_TBSEL_19 0x01000000 /* Count bit 19 of TBL */
#define SPR_MMCR0_TBSEL_23 0x00800000 /* Count bit 23 of TBL */
#define SPR_MMCR0_TBSEL_31 0x00000000 /* Count bit 31 of TBL */
#define SPR_MMCR0_TBEE 0x00400000 /* Time-base event enable */
#define SPR_MMCR0_THRESHOLD(x) ((x) << 16) /* Threshold value */
#define SPR_MMCR0_PMC1CE 0x00008000 /* PMC1 condition enable */
#define SPR_MMCR0_PMCNCE 0x00004000 /* PMCn condition enable */
#define SPR_MMCR0_TRIGGER 0x00002000 /* Trigger */
#define SPR_MMCR0_PMAO 0x00000080 /* PM Alert Occurred */
#define SPR_MMCR0_FCPC 0x00001000 /* Freeze Counters in Problem State Cond. */
#define SPR_MMCR0_FC56 0x00000010 /* Freeze Counters 5-6 */
#define SPR_MMCR0_PMC1SEL(x) ((x) << 8) /* PMC1 selector (970) */
#define SPR_MMCR0_PMC2SEL(x) ((x) << 1) /* PMC2 selector (970) */
#define SPR_MMCR0_74XX_PMC1SEL(x) (((x) & 0x3f) << 6) /* PMC1 selector */
#define SPR_MMCR0_74XX_PMC2SEL(x) (((x) & 0x3f) << 0) /* PMC2 selector */
#define SPR_MMCR1 0x31e /* ... Monitor Mode Control Register 1 */
#define SPR_MMCR1_PMC3SEL(x) (((x) & 0x1f) << 27) /* PMC 3 selector */
#define SPR_MMCR1_PMC4SEL(x) (((x) & 0x1f) << 22) /* PMC 4 selector */
#define SPR_MMCR1_PMC5SEL(x) (((x) & 0x1f) << 17) /* PMC 5 selector */
#define SPR_MMCR1_PMC6SEL(x) (((x) & 0x1f) << 12) /* PMC 6 selector */
#define SPR_MMCR1_74XX_PMC6SEL(x) (((x) & 0x3f) << 11) /* PMC 6 selector */
#define SPR_MMCR1_PMC7SEL(x) (((x) & 0x1f) << 7) /* PMC 7 selector */
#define SPR_MMCR1_PMC8SEL(x) (((x) & 0x1f) << 2) /* PMC 8 selector */
#define SPR_MMCR1_P8_PMCSEL_ALL 0xffffffff
#define SPR_MMCR1_P8_PMCNSEL_MASK(n) (0xffUL << ((3-(n))*8))
#define SPR_MMCR1_P8_PMCNSEL(n, v) ((unsigned long)(v) << ((3-(n))*8))
#define SPR_MMCR2 0x311
#define SPR_MMCR2_CNBIT(n, bit) ((bit) << (((5 - (n)) * 9) + 10))
#define SPR_MMCR2_FCNS(n) SPR_MMCR2_CNBIT(n, 0x100ULL)
#define SPR_MMCR2_FCNP0(n) SPR_MMCR2_CNBIT(n, 0x080ULL)
#define SPR_MMCR2_FCNP1(n) SPR_MMCR2_CNBIT(n, 0x040ULL)
#define SPR_MMCR2_FCNM1(n) SPR_MMCR2_CNBIT(n, 0x020ULL)
#define SPR_MMCR2_FCNM0(n) SPR_MMCR2_CNBIT(n, 0x010ULL)
#define SPR_MMCR2_FCNWAIT(n) SPR_MMCR2_CNBIT(n, 0x008ULL)
#define SPR_MMCR2_FCNH(n) SPR_MMCR2_CNBIT(n, 0x004ULL)
/* Freeze Counter N in Hypervisor/Supervisor/Problem states */
#define SPR_MMCR2_FCNHSP(n) \
(SPR_MMCR2_FCNS(n) | SPR_MMCR2_FCNP0(n) | \
SPR_MMCR2_FCNP1(n) | SPR_MMCR2_FCNH(n))
#define SPR_M_TWB 0x31c /* ..8 MMU tablewalk base */
#define M_TWB_L1TB 0xfffff000 /* level-1 translation base */
#define M_TWB_L1INDX 0x00000ffc /* level-1 index */
#define SPR_MD_TWC 0x31d /* ..8 DMMU tablewalk control */
#define SPR_MD_RPN 0x31e /* ..8 DMMU real (phys) page number */
#define SPR_MD_TW 0x31f /* ..8 MMU tablewalk scratch */
#define SPR_BESCRS 0x320 /* .6. Branch Event Status and Control Set Register */
#define SPR_BESCRSU 0x321 /* .6. Branch Event Status and Control Set Register (upper 32-bit) */
#define SPR_BESCRR 0x322 /* .6. Branch Event Status and Control Reset Register */
#define SPR_BESCRRU 0x323 /* .6. Branch Event Status and Control Register (upper 32-bit) */
#define SPR_EBBHR 0x324 /* .6. Event-based Branch Handler Register */
#define SPR_EBBRR 0x325 /* .6. Event-based Branch Return Register */
#define SPR_BESCR 0x326 /* .6. Branch Event Status and Control Register */
#define SPR_LMRR 0x32d /* .6. Load Monitored Region Register */
#define SPR_LMSER 0x32e /* .6. Load Monitored Section Enable Register */
#define SPR_TAR 0x32f /* .6. Branch Target Address Register */
#define SPR_MI_CAM 0x330 /* ..8 IMMU CAM entry read */
#define SPR_MI_RAM0 0x331 /* ..8 IMMU RAM entry read reg 0 */
#define SPR_MI_RAM1 0x332 /* ..8 IMMU RAM entry read reg 1 */
#define SPR_MD_CAM 0x338 /* ..8 IMMU CAM entry read */
#define SPR_MD_RAM0 0x339 /* ..8 IMMU RAM entry read reg 0 */
#define SPR_MD_RAM1 0x33a /* ..8 IMMU RAM entry read reg 1 */
#define SPR_PSSCR 0x357 /* Processor Stop Status and Control Register (ISA 3.0) */
#define PSSCR_PLS_S 60
#define PSSCR_PLS_M (0xf << PSSCR_PLS_S)
#define PSSCR_SD (1 << 22)
#define PSSCR_ESL (1 << 21)
#define PSSCR_EC (1 << 20)
#define PSSCR_PSLL_S 16
#define PSSCR_PSLL_M (0xf << PSSCR_PSLL_S)
#define PSSCR_TR_S 8
#define PSSCR_TR_M (0x3 << PSSCR_TR_S)
#define PSSCR_MTL_S 4
#define PSSCR_MTL_M (0xf << PSSCR_MTL_S)
#define PSSCR_RL_S 0
#define PSSCR_RL_M (0xf << PSSCR_RL_S)
#define SPR_PMCR 0x374 /* Processor Management Control Register */
#define SPR_UMMCR2 0x3a0 /* .6. User Monitor Mode Control Register 2 */
#define SPR_UMMCR0 0x3a8 /* .6. User Monitor Mode Control Register 0 */
#define SPR_USIA 0x3ab /* .6. User Sampled Instruction Address */
#define SPR_UMMCR1 0x3ac /* .6. User Monitor Mode Control Register 1 */
#define SPR_MMCR2_74XX 0x3b0 /* .6. Monitor Mode Control Register 2 */
#define SPR_MMCR2_74XX_THRESHMULT_32 0x80000000 /* Multiply MMCR0 threshold by 32 */
#define SPR_MMCR2_74XX_THRESHMULT_2 0x00000000 /* Multiply MMCR0 threshold by 2 */
#define SPR_PMC5_74XX 0x3b1 /* .6. Performance Counter Register 5 */
#define SPR_PMC6_74XX 0x3b2 /* .6. Performance Counter Register 6 */
#define SPR_MMCR0_74XX 0x3b8 /* .6. Monitor Mode Control Register 0 */
#define SPR_PMC1_74XX 0x3b9 /* .6. Performance Counter Register 1 */
#define SPR_PMC2_74XX 0x3ba /* .6. Performance Counter Register 2 */
#define SPR_SIA 0x3bb /* .6. Sampled Instruction Address */
#define SPR_MMCR1_74XX 0x3bc /* .6. Monitor Mode Control Register 2 */
#define SPR_PMC3_74XX 0x3bd /* .6. Performance Counter Register 3 */
#define SPR_PMC4_74XX 0x3be /* .6. Performance Counter Register 4 */
#define SPR_DMISS 0x3d0 /* .68 Data TLB Miss Address Register */
#define SPR_DCMP 0x3d1 /* .68 Data TLB Compare Register */
#define SPR_HASH1 0x3d2 /* .68 Primary Hash Address Register */
#define SPR_HASH2 0x3d3 /* .68 Secondary Hash Address Register */
#define SPR_IMISS 0x3d4 /* .68 Instruction TLB Miss Address Register */
#define SPR_TLBMISS 0x3d4 /* .6. TLB Miss Address Register */
#define SPR_DEAR 0x03d /* ..8 Data Exception Address Register */
#define SPR_ICMP 0x3d5 /* .68 Instruction TLB Compare Register */
#define SPR_PTEHI 0x3d5 /* .6. Instruction TLB Compare Register */
#define SPR_RPA 0x3d6 /* .68 Required Physical Address Register */
#define SPR_PTELO 0x3d6 /* .6. Required Physical Address Register */
#define SPR_TSR 0x150 /* ..8 Timer Status Register */
#define SPR_TCR 0x154 /* ..8 Timer Control Register */
#define TSR_ENW 0x80000000 /* Enable Next Watchdog */
#define TSR_WIS 0x40000000 /* Watchdog Interrupt Status */
#define TSR_WRS_MASK 0x30000000 /* Watchdog Reset Status */
#define TSR_WRS_NONE 0x00000000 /* No watchdog reset has occurred */
#define TSR_WRS_CORE 0x10000000 /* Core reset was forced by the watchdog */
#define TSR_WRS_CHIP 0x20000000 /* Chip reset was forced by the watchdog */
#define TSR_WRS_SYSTEM 0x30000000 /* System reset was forced by the watchdog */
#define TSR_PIS 0x08000000 /* PIT Interrupt Status */
#define TSR_DIS 0x08000000 /* Decrementer Interrupt Status */
#define TSR_FIS 0x04000000 /* FIT Interrupt Status */
#define TCR_WP_MASK 0xc0000000 /* Watchdog Period mask */
#define TCR_WP_2_17 0x00000000 /* 2**17 clocks */
#define TCR_WP_2_21 0x40000000 /* 2**21 clocks */
#define TCR_WP_2_25 0x80000000 /* 2**25 clocks */
#define TCR_WP_2_29 0xc0000000 /* 2**29 clocks */
#define TCR_WRC_MASK 0x30000000 /* Watchdog Reset Control mask */
#define TCR_WRC_NONE 0x00000000 /* No watchdog reset */
#define TCR_WRC_CORE 0x10000000 /* Core reset */
#define TCR_WRC_CHIP 0x20000000 /* Chip reset */
#define TCR_WRC_SYSTEM 0x30000000 /* System reset */
#define TCR_WIE 0x08000000 /* Watchdog Interrupt Enable */
#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
#define TCR_DIE 0x04000000 /* Pecrementer Interrupt Enable */
#define TCR_FP_MASK 0x03000000 /* FIT Period */
#define TCR_FP_2_9 0x00000000 /* 2**9 clocks */
#define TCR_FP_2_13 0x01000000 /* 2**13 clocks */
#define TCR_FP_2_17 0x02000000 /* 2**17 clocks */
#define TCR_FP_2_21 0x03000000 /* 2**21 clocks */
#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */
#define TCR_ARE 0x00400000 /* Auto Reload Enable */
#define SPR_HID0 0x3f0 /* ..8 Hardware Implementation Register 0 */
#define SPR_HID1 0x3f1 /* ..8 Hardware Implementation Register 1 */
#define SPR_HID2 0x3f3 /* ..8 Hardware Implementation Register 2 */
#define SPR_HID4 0x3f4 /* ..8 Hardware Implementation Register 4 */
#define SPR_HID5 0x3f6 /* ..8 Hardware Implementation Register 5 */
#define SPR_HID6 0x3f9 /* ..8 Hardware Implementation Register 6 */
#define SPR_CELL_TSRL 0x380 /* ... Cell BE Thread Status Register */
#define SPR_CELL_TSCR 0x399 /* ... Cell BE Thread Switch Register */
#if defined(AIM)
#define SPR_PIR 0x3ff /* .6. Processor Identification Register */
#elif defined(BOOKE)
#define SPR_PIR 0x11e /* ..8 Processor Identification Register */
#endif
#define DBCR0_EDM 0x80000000 /* External Debug Mode */
#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */
#define DBCR0_RST_MASK 0x30000000 /* ReSeT */
#define DBCR0_RST_NONE 0x00000000 /* No action */
#define DBCR0_RST_CORE 0x10000000 /* Core reset */
#define DBCR0_RST_CHIP 0x20000000 /* Chip reset */
#define DBCR0_RST_SYSTEM 0x30000000 /* System reset */
#define DBCR0_IC 0x08000000 /* Instruction Completion debug event */
#define DBCR0_BT 0x04000000 /* Branch Taken debug event */
#define DBCR0_EDE 0x02000000 /* Exception Debug Event */
#define DBCR0_TDE 0x01000000 /* Trap Debug Event */
#define DBCR0_IA1 0x00800000 /* IAC (Instruction Address Compare) 1 debug event */
#define DBCR0_IA2 0x00400000 /* IAC 2 debug event */
#define DBCR0_IA12 0x00200000 /* Instruction Address Range Compare 1-2 */
#define DBCR0_IA12X 0x00100000 /* IA12 eXclusive */
#define DBCR0_IA3 0x00080000 /* IAC 3 debug event */
#define DBCR0_IA4 0x00040000 /* IAC 4 debug event */
#define DBCR0_IA34 0x00020000 /* Instruction Address Range Compare 3-4 */
#define DBCR0_IA34X 0x00010000 /* IA34 eXclusive */
#define DBCR0_IA12T 0x00008000 /* Instruction Address Range Compare 1-2 range Toggle */
#define DBCR0_IA34T 0x00004000 /* Instruction Address Range Compare 3-4 range Toggle */
#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */
#define SPR_IABR 0x3f2 /* ..8 Instruction Address Breakpoint Register 0 */
#define SPR_DABR 0x3f5 /* .6. Data Address Breakpoint Register */
#define SPR_MSSCR0 0x3f6 /* .6. Memory SubSystem Control Register */
#define MSSCR0_SHDEN 0x80000000 /* 0: Shared-state enable */
#define MSSCR0_SHDPEN3 0x40000000 /* 1: ~SHD[01] signal enable in MEI mode */
#define MSSCR0_L1INTVEN 0x38000000 /* 2-4: L1 data cache ~HIT intervention enable */
#define MSSCR0_L2INTVEN 0x07000000 /* 5-7: L2 data cache ~HIT intervention enable*/
#define MSSCR0_DL1HWF 0x00800000 /* 8: L1 data cache hardware flush */
#define MSSCR0_MBO 0x00400000 /* 9: must be one */
#define MSSCR0_EMODE 0x00200000 /* 10: MPX bus mode (read-only) */
#define MSSCR0_ABD 0x00100000 /* 11: address bus driven (read-only) */
#define MSSCR0_MBZ 0x000fffff /* 12-31: must be zero */
#define MSSCR0_L2PFE 0x00000003 /* 30-31: L2 prefetch enable */
#define SPR_MSSSR0 0x3f7 /* .6. Memory Subsystem Status Register (MPC745x) */
#define MSSSR0_L2TAG 0x00040000 /* 13: L2 tag parity error */
#define MSSSR0_L2DAT 0x00020000 /* 14: L2 data parity error */
#define MSSSR0_L3TAG 0x00010000 /* 15: L3 tag parity error */
#define MSSSR0_L3DAT 0x00008000 /* 16: L3 data parity error */
#define MSSSR0_APE 0x00004000 /* 17: Address parity error */
#define MSSSR0_DPE 0x00002000 /* 18: Data parity error */
#define MSSSR0_TEA 0x00001000 /* 19: Bus transfer error acknowledge */
#define SPR_LDSTCR 0x3f8 /* .6. Load/Store Control Register */
#define SPR_L2PM 0x3f8 /* .6. L2 Private Memory Control Register */
#define SPR_L2CR 0x3f9 /* .6. L2 Control Register */
#define L2CR_L2E 0x80000000 /* 0: L2 enable */
#define L2CR_L2PE 0x40000000 /* 1: L2 data parity enable */
#define L2CR_L2SIZ 0x30000000 /* 2-3: L2 size */
#define L2SIZ_2M 0x00000000
#define L2SIZ_256K 0x10000000
#define L2SIZ_512K 0x20000000
#define L2SIZ_1M 0x30000000
#define L2CR_L2CLK 0x0e000000 /* 4-6: L2 clock ratio */
#define L2CLK_DIS 0x00000000 /* disable L2 clock */
#define L2CLK_10 0x02000000 /* core clock / 1 */
#define L2CLK_15 0x04000000 /* / 1.5 */
#define L2CLK_20 0x08000000 /* / 2 */
#define L2CLK_25 0x0a000000 /* / 2.5 */
#define L2CLK_30 0x0c000000 /* / 3 */
#define L2CR_L2RAM 0x01800000 /* 7-8: L2 RAM type */
#define L2RAM_FLOWTHRU_BURST 0x00000000
#define L2RAM_PIPELINE_BURST 0x01000000
#define L2RAM_PIPELINE_LATE 0x01800000
#define L2CR_L2DO 0x00400000 /* 9: L2 data-only.
Setting this bit disables instruction
caching. */
#define L2CR_L2I 0x00200000 /* 10: L2 global invalidate. */
#define L2CR_L2IO_7450 0x00010000 /* 11: L2 instruction-only (MPC745x). */
#define L2CR_L2CTL 0x00100000 /* 11: L2 RAM control (ZZ enable).
Enables automatic operation of the
L2ZZ (low-power mode) signal. */
#define L2CR_L2WT 0x00080000 /* 12: L2 write-through. */
#define L2CR_L2TS 0x00040000 /* 13: L2 test support. */
#define L2CR_L2OH 0x00030000 /* 14-15: L2 output hold. */
#define L2CR_L2DO_7450 0x00010000 /* 15: L2 data-only (MPC745x). */
#define L2CR_L2SL 0x00008000 /* 16: L2 DLL slow. */
#define L2CR_L2DF 0x00004000 /* 17: L2 differential clock. */
#define L2CR_L2BYP 0x00002000 /* 18: L2 DLL bypass. */
#define L2CR_L2FA 0x00001000 /* 19: L2 flush assist (for software flush). */
#define L2CR_L2HWF 0x00000800 /* 20: L2 hardware flush. */
#define L2CR_L2IO 0x00000400 /* 21: L2 instruction-only. */
#define L2CR_L2CLKSTP 0x00000200 /* 22: L2 clock stop. */
#define L2CR_L2DRO 0x00000100 /* 23: L2DLL rollover checkstop enable. */
#define L2CR_L2IP 0x00000001 /* 31: L2 global invalidate in */
/* progress (read only). */
#define SPR_L3CR 0x3fa /* .6. L3 Control Register */
#define L3CR_L3E 0x80000000 /* 0: L3 enable */
#define L3CR_L3PE 0x40000000 /* 1: L3 data parity enable */
#define L3CR_L3APE 0x20000000
#define L3CR_L3SIZ 0x10000000 /* 3: L3 size (0=1MB, 1=2MB) */
#define L3CR_L3CLKEN 0x08000000 /* 4: Enables L3_CLK[0:1] */
#define L3CR_L3CLK 0x03800000
#define L3CR_L3IO 0x00400000
#define L3CR_L3CLKEXT 0x00200000
#define L3CR_L3CKSPEXT 0x00100000
#define L3CR_L3OH1 0x00080000
#define L3CR_L3SPO 0x00040000
#define L3CR_L3CKSP 0x00030000
#define L3CR_L3PSP 0x0000e000
#define L3CR_L3REP 0x00001000
#define L3CR_L3HWF 0x00000800
#define L3CR_L3I 0x00000400 /* 21: L3 global invalidate */
#define L3CR_L3RT 0x00000300
#define L3CR_L3NIRCA 0x00000080
#define L3CR_L3DO 0x00000040
#define L3CR_PMEN 0x00000004
#define L3CR_PMSIZ 0x00000003
#define SPR_THRM1 0x3fc /* .6. Thermal Management Register */
#define SPR_THRM2 0x3fd /* .6. Thermal Management Register */
#define SPR_THRM_TIN 0x80000000 /* Thermal interrupt bit (RO) */
#define SPR_THRM_TIV 0x40000000 /* Thermal interrupt valid (RO) */
#define SPR_THRM_THRESHOLD(x) ((x) << 23) /* Thermal sensor threshold */
#define SPR_THRM_TID 0x00000004 /* Thermal interrupt direction */
#define SPR_THRM_TIE 0x00000002 /* Thermal interrupt enable */
#define SPR_THRM_VALID 0x00000001 /* Valid bit */
#define SPR_THRM3 0x3fe /* .6. Thermal Management Register */
#define SPR_THRM_TIMER(x) ((x) << 1) /* Sampling interval timer */
#define SPR_THRM_ENABLE 0x00000001 /* TAU Enable */
#define SPR_FPECR 0x3fe /* .6. Floating-Point Exception Cause Register */
/* Time Base Register declarations */
#define TBR_TBL 0x10c /* 468 Time Base Lower - read */
#define TBR_TBU 0x10d /* 468 Time Base Upper - read */
#define TBR_TBWL 0x11c /* 468 Time Base Lower - supervisor, write */
#define TBR_TBWU 0x11d /* 468 Time Base Upper - supervisor, write */
/* Performance counter declarations */
#define PMC_OVERFLOW 0x80000000 /* Counter has overflowed */
/* The first five countable [non-]events are common to many PMC's */
#define PMCN_NONE 0 /* Count nothing */
#define PMCN_CYCLES 1 /* Processor cycles */
#define PMCN_ICOMP 2 /* Instructions completed */
#define PMCN_TBLTRANS 3 /* TBL bit transitions */
#define PCMN_IDISPATCH 4 /* Instructions dispatched */
/* Similar things for the 970 PMC direct counters */
#define PMC970N_NONE 0x8 /* Count nothing */
#define PMC970N_CYCLES 0xf /* Processor cycles */
#define PMC970N_ICOMP 0x9 /* Instructions completed */
#if defined(BOOKE)
#define SPR_MCARU 0x239 /* ..8 Machine Check Address register upper bits */
#define SPR_MCSR 0x23c /* ..8 Machine Check Syndrome register */
#define MCSR_MCP 0x80000000 /* Machine check input signal to core */
#define MCSR_L2MMU_MHIT 0x08000000 /* L2 MMU simultaneous hit */
#define MCSR_NMI 0x00100000 /* Non-maskable interrupt */
#define MCSR_MAV 0x00080000 /* MCAR address valid */
#define MCSR_MEA 0x00040000 /* MCAR effective address */
#define MCSR_IF 0x00010000 /* Instruction fetch error report */
#define MCSR_LD 0x00008000 /* Load instruction error report */
#define MCSR_ST 0x00004000 /* Store instruction error report */
#define MCSR_LDG 0x00002000 /* Guarded load instruction error report */
#define MCSR_TLBSYNC 0x00000002 /* Simultaneous TLBSYNC detected */
#define SPR_MCAR 0x23d /* ..8 Machine Check Address register */
#define SPR_ESR 0x003e /* ..8 Exception Syndrome Register */
#define ESR_PIL 0x08000000 /* Program interrupt - illegal */
#define ESR_PPR 0x04000000 /* Program interrupt - privileged */
#define ESR_PTR 0x02000000 /* Program interrupt - trap */
#define ESR_ST 0x00800000 /* Store operation */
#define ESR_DLK 0x00200000 /* Data storage, D cache locking */
#define ESR_ILK 0x00100000 /* Data storage, I cache locking */
#define ESR_BO 0x00020000 /* Data/instruction storage, byte ordering */
#define ESR_SPE 0x00000080 /* SPE exception bit */
#define SPR_CSRR0 0x03a /* ..8 58 Critical SRR0 */
#define SPR_CSRR1 0x03b /* ..8 59 Critical SRR1 */
#define SPR_MCSRR0 0x23a /* ..8 570 Machine check SRR0 */
#define SPR_MCSRR1 0x23b /* ..8 571 Machine check SRR1 */
#define SPR_DSRR0 0x23e /* ..8 574 Debug SRR0<E.ED> */
#define SPR_DSRR1 0x23f /* ..8 575 Debug SRR1<E.ED> */
#define SPR_MMUCSR0 0x3f4 /* ..8 1012 MMU Control and Status Register 0 */
#define MMUCSR0_L2TLB0_FI 0x04 /* TLB0 flash invalidate */
#define MMUCSR0_L2TLB1_FI 0x02 /* TLB1 flash invalidate */
#define SPR_SVR 0x3ff /* ..8 1023 System Version Register */
#define SVR_MPC8533 0x8034
#define SVR_MPC8533E 0x803c
#define SVR_MPC8541 0x8072
#define SVR_MPC8541E 0x807a
#define SVR_MPC8548 0x8031
#define SVR_MPC8548E 0x8039
#define SVR_MPC8555 0x8071
#define SVR_MPC8555E 0x8079
#define SVR_MPC8572 0x80e0
#define SVR_MPC8572E 0x80e8
#define SVR_P1011 0x80e5
#define SVR_P1011E 0x80ed
#define SVR_P1013 0x80e7
#define SVR_P1013E 0x80ef
#define SVR_P1020 0x80e4
#define SVR_P1020E 0x80ec
#define SVR_P1022 0x80e6
#define SVR_P1022E 0x80ee
#define SVR_P2010 0x80e3
#define SVR_P2010E 0x80eb
#define SVR_P2020 0x80e2
#define SVR_P2020E 0x80ea
#define SVR_P2041 0x8210
#define SVR_P2041E 0x8218
#define SVR_P3041 0x8211
#define SVR_P3041E 0x8219
#define SVR_P4040 0x8200
#define SVR_P4040E 0x8208
#define SVR_P4080 0x8201
#define SVR_P4080E 0x8209
#define SVR_P5010 0x8221
#define SVR_P5010E 0x8229
#define SVR_P5020 0x8220
#define SVR_P5020E 0x8228
#define SVR_P5021 0x8205
#define SVR_P5021E 0x820d
#define SVR_P5040 0x8204
#define SVR_P5040E 0x820c
#define SVR_VER(svr) (((svr) >> 16) & 0xffff)
#define SPR_PID0 0x030 /* ..8 Process ID Register 0 */
#define SPR_PID1 0x279 /* ..8 Process ID Register 1 */
#define SPR_PID2 0x27a /* ..8 Process ID Register 2 */
#define SPR_TLB0CFG 0x2B0 /* ..8 TLB 0 Config Register */
#define SPR_TLB1CFG 0x2B1 /* ..8 TLB 1 Config Register */
#define TLBCFG_ASSOC_MASK 0xff000000 /* Associativity of TLB */
#define TLBCFG_ASSOC_SHIFT 24
#define TLBCFG_NENTRY_MASK 0x00000fff /* Number of entries in TLB */
#define SPR_IVPR 0x03f /* ..8 Interrupt Vector Prefix Register */
#define SPR_IVOR0 0x190 /* ..8 Critical input */
#define SPR_IVOR1 0x191 /* ..8 Machine check */
#define SPR_IVOR2 0x192
#define SPR_IVOR3 0x193
#define SPR_IVOR4 0x194
#define SPR_IVOR5 0x195
#define SPR_IVOR6 0x196
#define SPR_IVOR7 0x197
#define SPR_IVOR8 0x198
#define SPR_IVOR9 0x199
#define SPR_IVOR10 0x19a
#define SPR_IVOR11 0x19b
#define SPR_IVOR12 0x19c
#define SPR_IVOR13 0x19d
#define SPR_IVOR14 0x19e
#define SPR_IVOR15 0x19f
#define SPR_IVOR32 0x210
#define SPR_IVOR33 0x211
#define SPR_IVOR34 0x212
#define SPR_IVOR35 0x213
#define SPR_MAS0 0x270 /* ..8 MMU Assist Register 0 Book-E/e500 */
#define SPR_MAS1 0x271 /* ..8 MMU Assist Register 1 Book-E/e500 */
#define SPR_MAS2 0x272 /* ..8 MMU Assist Register 2 Book-E/e500 */
#define SPR_MAS3 0x273 /* ..8 MMU Assist Register 3 Book-E/e500 */
#define SPR_MAS4 0x274 /* ..8 MMU Assist Register 4 Book-E/e500 */
#define SPR_MAS5 0x275 /* ..8 MMU Assist Register 5 Book-E */
#define SPR_MAS6 0x276 /* ..8 MMU Assist Register 6 Book-E/e500 */
#define SPR_MAS7 0x3B0 /* ..8 MMU Assist Register 7 Book-E/e500 */
#define SPR_MAS8 0x155 /* ..8 MMU Assist Register 8 Book-E/e500 */
#define SPR_L1CFG0 0x203 /* ..8 L1 cache configuration register 0 */
#define SPR_L1CFG1 0x204 /* ..8 L1 cache configuration register 1 */
#define SPR_CCR1 0x378
#define CCR1_L2COBE 0x00000040
#define DCR_L2DCDCRAI 0x0000 /* L2 D-Cache DCR Address Pointer */
#define DCR_L2DCDCRDI 0x0001 /* L2 D-Cache DCR Data Indirect */
#define DCR_L2CR0 0x00 /* L2 Cache Configuration Register 0 */
#define L2CR0_AS 0x30000000
#define SPR_L1CSR0 0x3F2 /* ..8 L1 Cache Control and Status Register 0 */
#define L1CSR0_DCPE 0x00010000 /* Data Cache Parity Enable */
#define L1CSR0_DCLFR 0x00000100 /* Data Cache Lock Bits Flash Reset */
#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */
#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */
#define SPR_L1CSR1 0x3F3 /* ..8 L1 Cache Control and Status Register 1 */
#define L1CSR1_ICPE 0x00010000 /* Instruction Cache Parity Enable */
#define L1CSR1_ICUL 0x00000400 /* Instr Cache Unable to Lock */
#define L1CSR1_ICLFR 0x00000100 /* Instruction Cache Lock Bits Flash Reset */
#define L1CSR1_ICFI 0x00000002 /* Instruction Cache Flash Invalidate */
#define L1CSR1_ICE 0x00000001 /* Instruction Cache Enable */
#define SPR_L2CFG0 0x207 /* ..8 L2 Configuration Register 0 */
#define SPR_L2CSR0 0x3F9 /* ..8 L2 Cache Control and Status Register 0 */
#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */
#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity Enable */
#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */
#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flags Clear */
#define SPR_BUCSR 0x3F5 /* ..8 Branch Unit Control and Status Register */
#define BUCSR_BPEN 0x00000001 /* Branch Prediction Enable */
#define BUCSR_BBFI 0x00000200 /* Branch Buffer Flash Invalidate */
#endif /* BOOKE */
#endif /* !_POWERPC_SPR_H_ */