freebsd-nq/sys/dev/sound/pci/es137x.h
2010-03-08 18:51:28 +00:00

202 lines
8.3 KiB
C

/*-
* Copyright (c) 1998 Joachim Kuebart <joachim.kuebart@gmx.net>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/* This supports the ENSONIQ AudioPCI board based on the ES1370. */
#ifndef _ES1370_REG_H
#define _ES1370_REG_H
#define ES1370_REG_CONTROL 0x00
#define ES1370_REG_STATUS 0x04
#define ES1370_REG_UART_DATA 0x08
#define ES1370_REG_UART_STATUS 0x09
#define ES1370_REG_UART_CONTROL 0x09
#define ES1370_REG_UART_TEST 0x0a
#define ES1370_REG_MEMPAGE 0x0c
#define ES1370_REG_CODEC 0x10
#define CODEC_INDEX_SHIFT 8
#define ES1370_REG_SERIAL_CONTROL 0x20
#define ES1370_REG_DAC1_SCOUNT 0x24
#define ES1370_REG_DAC2_SCOUNT 0x28
#define ES1370_REG_ADC_SCOUNT 0x2c
#define ES1370_REG_DAC1_FRAMEADR 0xc30
#define ES1370_REG_DAC1_FRAMECNT 0xc34
#define ES1370_REG_DAC2_FRAMEADR 0xc38
#define ES1370_REG_DAC2_FRAMECNT 0xc3c
#define ES1370_REG_ADC_FRAMEADR 0xd30
#define ES1370_REG_ADC_FRAMECNT 0xd34
#define DAC2_SRTODIV(x) (((1411200 + (x) / 2) / (x) - 2) & 0x1fff)
#define DAC2_DIVTOSR(x) (1411200 / ((x) + 2))
#define CTRL_ADC_STOP 0x80000000 /* 1 = ADC stopped */
#define CTRL_XCTL1 0x40000000 /* SERR pin if enabled */
#define CTRL_OPEN 0x20000000 /* no function, can be read and
* written */
#define CTRL_PCLKDIV 0x1fff0000 /* ADC/DAC2 clock divider */
#define CTRL_SH_PCLKDIV 16
#define CTRL_MSFMTSEL 0x00008000 /* MPEG serial data fmt: 0 = Sony, 1
* = I2S */
#define CTRL_M_SBB 0x00004000 /* DAC2 clock: 0 = PCLKDIV, 1 = MPEG */
#define CTRL_WTSRSEL 0x00003000 /* DAC1 clock freq: 0=5512, 1=11025,
* 2=22050, 3=44100 */
#define CTRL_SH_WTSRSEL 12
#define CTRL_DAC_SYNC 0x00000800 /* 1 = DAC2 runs off DAC1 clock */
#define CTRL_CCB_INTRM 0x00000400 /* 1 = CCB "voice" ints enabled */
#define CTRL_M_CB 0x00000200 /* recording source: 0 = ADC, 1 =
* MPEG */
#define CTRL_XCTL0 0x00000100 /* 0 = Line in, 1 = Line out */
#define CTRL_BREQ 0x00000080 /* 1 = test mode (internal mem test) */
#define CTRL_DAC1_EN 0x00000040 /* enable DAC1 */
#define CTRL_DAC2_EN 0x00000020 /* enable DAC2 */
#define CTRL_ADC_EN 0x00000010 /* enable ADC */
#define CTRL_UART_EN 0x00000008 /* enable MIDI uart */
#define CTRL_JYSTK_EN 0x00000004 /* enable Joystick port (presumably
* at address 0x200) */
#define CTRL_CDC_EN 0x00000002 /* enable serial (CODEC) interface */
#define CTRL_SERR_DIS 0x00000001 /* 1 = disable PCI SERR signal */
#define SCTRL_P2ENDINC 0x00380000 /* */
#define SCTRL_SH_P2ENDINC 19
#define SCTRL_P2STINC 0x00070000 /* */
#define SCTRL_SH_P2STINC 16
#define SCTRL_R1LOOPSEL 0x00008000 /* 0 = loop mode */
#define SCTRL_P2LOOPSEL 0x00004000 /* 0 = loop mode */
#define SCTRL_P1LOOPSEL 0x00002000 /* 0 = loop mode */
#define SCTRL_P2PAUSE 0x00001000 /* 1 = pause mode */
#define SCTRL_P1PAUSE 0x00000800 /* 1 = pause mode */
#define SCTRL_R1INTEN 0x00000400 /* enable interrupt */
#define SCTRL_P2INTEN 0x00000200 /* enable interrupt */
#define SCTRL_P1INTEN 0x00000100 /* enable interrupt */
#define SCTRL_P1SCTRLD 0x00000080 /* reload sample count register for
* DAC1 */
#define SCTRL_P2DACSEN 0x00000040 /* 1 = DAC2 play back last sample
* when disabled */
#define SCTRL_R1SEB 0x00000020 /* 1 = 16bit */
#define SCTRL_R1SMB 0x00000010 /* 1 = stereo */
#define SCTRL_R1FMT 0x00000030 /* format mask */
#define SCTRL_SH_R1FMT 4
#define SCTRL_P2SEB 0x00000008 /* 1 = 16bit */
#define SCTRL_P2SMB 0x00000004 /* 1 = stereo */
#define SCTRL_P2FMT 0x0000000c /* format mask */
#define SCTRL_SH_P2FMT 2
#define SCTRL_P1SEB 0x00000002 /* 1 = 16bit */
#define SCTRL_P1SMB 0x00000001 /* 1 = stereo */
#define SCTRL_P1FMT 0x00000003 /* format mask */
#define SCTRL_SH_P1FMT 0
#define STAT_INTR 0x80000000 /* wired or of all interrupt bits */
#define STAT_CSTAT 0x00000400 /* 1 = codec busy or codec write in
* progress */
#define STAT_CBUSY 0x00000200 /* 1 = codec busy */
#define STAT_CWRIP 0x00000100 /* 1 = codec write in progress */
#define STAT_VC 0x00000060 /* CCB int source, 0=DAC1, 1=DAC2,
* 2=ADC, 3=undef */
#define STAT_SH_VC 5
#define STAT_MCCB 0x00000010 /* CCB int pending */
#define STAT_UART 0x00000008 /* UART int pending */
#define STAT_DAC1 0x00000004 /* DAC1 int pending */
#define STAT_DAC2 0x00000002 /* DAC2 int pending */
#define STAT_ADC 0x00000001 /* ADC int pending */
#define CODEC_OMIX1 0x10
#define CODEC_OMIX2 0x11
#define CODEC_LIMIX1 0x12
#define CODEC_RIMIX1 0x13
#define CODEC_LIMIX2 0x14
#define CODEC_RIMIX2 0x15
#define CODEC_RES_PD 0x16
#define CODEC_CSEL 0x17
#define CODEC_ADSEL 0x18
#define CODEC_MGAIN 0x19
/* ES1371 specific */
#define CODEC_ID_SESHIFT 10
#define CODEC_ID_SEMASK 0x1f
#define CODEC_PIRD 0x00800000 /* 0 = write AC97 register */
#define CODEC_PIADD_MASK 0x007f0000
#define CODEC_PIADD_SHIFT 16
#define CODEC_PIDAT_MASK 0x0000ffff
#define CODEC_PIDAT_SHIFT 0
#define CODEC_PORD 0x00800000 /* 0 = write AC97 register */
#define CODEC_POADD_MASK 0x007f0000
#define CODEC_POADD_SHIFT 16
#define CODEC_PODAT_MASK 0x0000ffff
#define CODEC_PODAT_SHIFT 0
#define CODEC_RDY 0x80000000 /* AC97 read data valid */
#define CODEC_WIP 0x40000000 /* AC97 write in progress */
#define ES1370_REG_CONTROL 0x00
#define ES1370_REG_SERIAL_CONTROL 0x20
#define ES1371_REG_CODEC 0x14
#define ES1371_REG_LEGACY 0x18 /* W/R: Legacy control/status register */
#define ES1371_REG_SMPRATE 0x10 /* W/R: Codec rate converter interface register */
#define ES1371_SYNC_RES (1<<14) /* Warm AC97 reset */
#define ES1371_DIS_R1 (1<<19) /* record channel accumulator update disable */
#define ES1371_DIS_P2 (1<<20) /* playback channel 2 accumulator update disable */
#define ES1371_DIS_P1 (1<<21) /* playback channel 1 accumulator update disable */
#define ES1371_DIS_SRC (1<<22) /* sample rate converter disable */
#define ES1371_SRC_RAM_BUSY (1<<23) /* R/O: sample rate memory is busy */
#define ES1371_SRC_RAM_WE (1<<24) /* R/W: read/write control for sample rate converter */
#define ES1371_SRC_RAM_ADDRO(o) (((o)&0x7f)<<25) /* address of the sample rate converter */
#define ES1371_SRC_RAM_DATAO(o) (((o)&0xffff)<<0) /* current value of the sample rate converter */
#define ES1371_SRC_RAM_DATAI(i) (((i)>>0)&0xffff) /* current value of the sample rate converter */
/*
* S/PDIF specific
*/
/* Use ES1370_REG_CONTROL */
#define RECEN_B 0x08000000 /* Used to control mixing of analog with digital data */
#define SPDIFEN_B 0x04000000 /* Reset to switch digital output mux to "THRU" mode */
/* Use ES1370_REG_STATUS */
#define ENABLE_SPDIF 0x00040000 /* Used to enable the S/PDIF circuitry */
#define TEST_SPDIF 0x00020000 /* Used to put the S/PDIF module in "test mode" */
/*
* Sample rate converter addresses
*/
#define ES_SMPREG_DAC1 0x70
#define ES_SMPREG_DAC2 0x74
#define ES_SMPREG_ADC 0x78
#define ES_SMPREG_TRUNC_N 0x00
#define ES_SMPREG_INT_REGS 0x01
#define ES_SMPREG_VFREQ_FRAC 0x03
#define ES_SMPREG_VOL_ADC 0x6c
#define ES_SMPREG_VOL_DAC1 0x7c
#define ES_SMPREG_VOL_DAC2 0x7e
#endif