freebsd-nq/sys/dev/ofw/ofw_bus_if.m
Luiz Otavio O Souza 628a40b5c4 Fix the gpio-specifier decoding by respecting the GPIO controller's
#gpio-cells property.

Add a new ofw_bus method (OFW_BUS_MAP_GPIOS()) that allows the GPIO
controller to implement its own mapping to deal with gpio-specifiers,
allowing the decoding of gpio-specifiers to be controller specific.

The default ofw_bus_map_gpios() decodes the linux standard (#gpio-cells =
<2>) and the FreeBSD standard (#gpio-cells = <3>).

It pass the gpio-specifier flag field to the children as an ivar variable so
they can act upon.
2014-04-27 12:11:00 +00:00

202 lines
6.1 KiB
Objective-C

#-
# Copyright (c) 2001, 2003 by Thomas Moestl <tmm@FreeBSD.org>
# Copyright (c) 2004, 2005 by Marius Strobl <marius@FreeBSD.org>
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# $FreeBSD$
# Interface for retrieving the package handle and a subset, namely
# 'compatible', 'device_type', 'model' and 'name', of the standard
# properties of a device on an Open Firmware assisted bus for use
# in device drivers. The rest of the standard properties, 'address',
# 'interrupts', 'reg' and 'status', are not covered by this interface
# as they are expected to be only of interest in the respective bus
# driver.
#include <sys/bus.h>
#include <dev/ofw/openfirm.h>
INTERFACE ofw_bus;
HEADER {
struct ofw_bus_devinfo {
phandle_t obd_node;
char *obd_compat;
char *obd_model;
char *obd_name;
char *obd_type;
char *obd_status;
};
};
CODE {
static ofw_bus_get_devinfo_t ofw_bus_default_get_devinfo;
static ofw_bus_get_compat_t ofw_bus_default_get_compat;
static ofw_bus_get_model_t ofw_bus_default_get_model;
static ofw_bus_get_name_t ofw_bus_default_get_name;
static ofw_bus_get_node_t ofw_bus_default_get_node;
static ofw_bus_get_type_t ofw_bus_default_get_type;
static ofw_bus_map_intr_t ofw_bus_default_map_intr;
static ofw_bus_map_gpios_t ofw_bus_default_map_gpios;
static const struct ofw_bus_devinfo *
ofw_bus_default_get_devinfo(device_t bus, device_t dev)
{
return (NULL);
}
static const char *
ofw_bus_default_get_compat(device_t bus, device_t dev)
{
return (NULL);
}
static const char *
ofw_bus_default_get_model(device_t bus, device_t dev)
{
return (NULL);
}
static const char *
ofw_bus_default_get_name(device_t bus, device_t dev)
{
return (NULL);
}
static phandle_t
ofw_bus_default_get_node(device_t bus, device_t dev)
{
return (-1);
}
static const char *
ofw_bus_default_get_type(device_t bus, device_t dev)
{
return (NULL);
}
int
ofw_bus_default_map_intr(device_t bus, device_t dev, phandle_t iparent,
int icells, pcell_t *interrupt)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (device_get_parent(bus) != NULL)
return OFW_BUS_MAP_INTR(device_get_parent(bus), dev,
iparent, icells, interrupt);
/* If that fails, then assume a one-domain system */
return (interrupt[0]);
}
int
ofw_bus_default_map_gpios(device_t bus, phandle_t dev,
phandle_t gparent, int gcells, pcell_t *gpios, uint32_t *pin,
uint32_t *flags)
{
/* Propagate up the bus hierarchy until someone handles it. */
if (device_get_parent(bus) != NULL)
return OFW_BUS_MAP_GPIOS(device_get_parent(bus), dev,
gparent, gcells, gpios, pin, flags);
/* If that fails, then assume the FreeBSD defaults. */
*pin = gpios[0];
if (gcells == 2 || gcells == 3)
*flags = gpios[gcells - 1];
return (0);
}
};
# Get the ofw_bus_devinfo struct for the device dev on the bus. Used for bus
# drivers which use the generic methods in ofw_bus_subr.c to implement the
# reset of this interface. The default method will return NULL, which means
# there is no such struct associated with the device.
METHOD const struct ofw_bus_devinfo * get_devinfo {
device_t bus;
device_t dev;
} DEFAULT ofw_bus_default_get_devinfo;
# Get the alternate firmware name for the device dev on the bus. The default
# method will return NULL, which means the device doesn't have such a property.
METHOD const char * get_compat {
device_t bus;
device_t dev;
} DEFAULT ofw_bus_default_get_compat;
# Get the firmware model name for the device dev on the bus. The default method
# will return NULL, which means the device doesn't have such a property.
METHOD const char * get_model {
device_t bus;
device_t dev;
} DEFAULT ofw_bus_default_get_model;
# Get the firmware name for the device dev on the bus. The default method will
# return NULL, which means the device doesn't have such a property.
METHOD const char * get_name {
device_t bus;
device_t dev;
} DEFAULT ofw_bus_default_get_name;
# Get the firmware node for the device dev on the bus. The default method will
# return -1, which signals that there is no such node.
METHOD phandle_t get_node {
device_t bus;
device_t dev;
} DEFAULT ofw_bus_default_get_node;
# Get the firmware device type for the device dev on the bus. The default
# method will return NULL, which means the device doesn't have such a property.
METHOD const char * get_type {
device_t bus;
device_t dev;
} DEFAULT ofw_bus_default_get_type;
# Map an (interrupt parent, IRQ) pair to a unique system-wide interrupt number.
# If the interrupt encoding includes a sense field, the interrupt sense will
# also be configured.
METHOD int map_intr {
device_t bus;
device_t dev;
phandle_t iparent;
int icells;
pcell_t *interrupt;
} DEFAULT ofw_bus_default_map_intr;
# Map the GPIO controller specific gpio-specifier to GPIO pin and flags.
METHOD int map_gpios {
device_t bus;
phandle_t dev;
phandle_t gparent;
int gcells;
pcell_t *gpios;
uint32_t *pin;
uint32_t *flags;
} DEFAULT ofw_bus_default_map_gpios;