Marius Strobl 55dae242e6 Add and use a MMC_DECLARE_BRIDGE macro for declaring mmc(4) bridges ... as kernel drivers and their dependency onto mmc(4); this allows for incrementing the mmc(4) module version but also for entire omission of these bridge declarations for mmccam(4) in a single place, i. e. in dev/mmc/bridge.h.		2017-03-07 22:42:44 +00:00
..
bcm283x_dwc_fdt.c	Make BCM283x USB driver compatible with upstream DT	2016-10-12 03:07:49 +00:00
bcm2835_audio.c	[rpi] Fix bcm2835_audio locking and samples starvation	2016-12-27 19:08:08 +00:00
bcm2835_bsc.c	Add compatible strings used in upstream dts files	2016-10-12 03:00:42 +00:00
bcm2835_bscreg.h
bcm2835_bscvar.h	Add a mask to match only the relative base address of BSC controllers.	2015-02-16 19:06:31 +00:00
bcm2835_cpufreq.c	[rpi] rpi3 should use the same cpufreq logic as rpi2, not rpi-b	2017-03-04 17:34:36 +00:00
bcm2835_dma.c	Stop including fdt_common.h from the arm code when it's unneeded.	2016-11-14 11:41:22 +00:00
bcm2835_dma.h	Do not use DMA channels used by GPU.	2016-02-16 12:19:06 +00:00
bcm2835_fb.c	Use the correct OF_getencprop to get the height.	2016-11-16 11:31:53 +00:00
bcm2835_fbd.c	Stop including fdt_common.h from the arm code when it's unneeded.	2016-11-14 11:41:22 +00:00
bcm2835_ft5406.c	Stop including fdt_common.h from the arm code when it's unneeded.	2016-11-14 11:41:22 +00:00
bcm2835_gpio.c	Start to remove the old pre-INTRNG code from the arm platforms. These have	2016-11-08 12:15:57 +00:00
bcm2835_gpio.h
bcm2835_intr.c	Stop including fdt_common.h from the arm code when it's unneeded.	2016-11-14 11:41:22 +00:00
bcm2835_machdep.c	All armv6 platforms have the same implementation of platform_lastaddr.	2016-12-16 10:31:13 +00:00
bcm2835_mbox_prop.h	Force framebuffer virtual viewport to be the same as physical	2016-04-20 22:38:00 +00:00
bcm2835_mbox.c	Add compatibility string from upstream DT	2016-10-12 03:03:55 +00:00
bcm2835_mbox.h	Driver for CPU frequency/voltage control on the Raspberry Pi.	2014-12-20 19:15:10 +00:00
bcm2835_rng.c	Random bit generator (RBG) driver for RPi and RPi2.	2016-07-19 18:07:47 +00:00
bcm2835_sdhci.c	Add and use a MMC_DECLARE_BRIDGE macro for declaring mmc(4) bridges	2017-03-07 22:42:44 +00:00
bcm2835_spi.c	ofw_spi: Parse property for the SPI mode and CS polarity.	2016-12-18 14:54:20 +00:00
bcm2835_spireg.h
bcm2835_spivar.h
bcm2835_systimer.c	Stop including fdt_common.h from the arm code when it's unneeded.	2016-11-14 11:41:22 +00:00
bcm2835_vcbus.h	Make BRCM2837 port conform FreeBSD/ARM64 guidelines	2016-10-14 22:23:03 +00:00
bcm2835_vcio.c	Remove some NULL checks after M_WAITOK allocations from sys/arm/.	2016-08-09 16:02:35 +00:00
bcm2835_wdog.c	Add the missing void to function signatures in much of the arm code.	2016-12-13 13:43:22 +00:00
bcm2835_wdog.h
bcm2836_mp.c	Start to remove the old pre-INTRNG code from the arm platforms. These have	2016-11-08 12:15:57 +00:00
bcm2836_mp.h	RPI2: Add support for PLATFORM_SMP so we can later add it to GENERIC.	2016-09-29 06:54:02 +00:00
bcm2836.c	[rpi3] Fix SMP build for FreeBSD/arm64	2016-11-24 00:39:17 +00:00
files.bcm283x	Start to remove the old pre-INTRNG code from the arm platforms. These have	2016-11-08 12:15:57 +00:00
files.bcm2835	Build the cpufunc_asm_* files based on the cpu type, not which config file	2015-03-29 22:43:39 +00:00
files.bcm2836	Create device options for the two common ARM timers.	2015-11-21 16:23:56 +00:00
std.bcm2835	Add the SOC_BCM2835 and SOC_BCM2836 options for the arm kernel and add the	2015-03-24 18:46:01 +00:00
std.bcm2836	Remake support for SMP kernel on UP cpu:	2017-02-02 06:14:44 +00:00
std.rpi	Remove FREEBSD_BOOT_LOADER that already exists in std.armv6 config file.	2016-03-20 16:48:29 +00:00
vc_vchi_audioserv_defs.h	Add VideoCore audio driver for Rasperry Pi (BCM2835)	2015-02-08 01:12:40 +00:00