d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
49b2d728a8
freebsd-nq/sys/dev/mii
History
John Baldwin 38cc658ff6 Add support for the BCM5906[M] adapters. These adapters only support 
10/100 operation and place the mailbox registers at a different offset.
They also do not have an EEPROM, so the MAC address must be read from
NVRAM instead.

MFC after:	1 month
PR:		kern/118975
Submitted by:	benjsc, Thomas Nyström  thn at saeab dot se
Submitted by:	sephe (original patch for DragonflyBSD)
2008-04-29 19:47:13 +00:00
..
acphy.c Set MIIF_HAVE_FIBER and add IFM_100_FX media when the AC_MCTL_FX_SEL 2007-01-12 22:59:38 +00:00
acphyreg.h - Correct the AC_MCTL_BYP_PCS constant. 2007-01-12 22:58:04 +00:00
amphy.c Fix a typo in a comment. 2008-01-27 01:11:57 +00:00
amphyreg.h
bmtphy.c Add a helper function mii_phy_dev_probe(), which wraps around the 2006-12-02 15:32:34 +00:00
bmtphyreg.h
brgphy.c Add support for the BCM5906[M] adapters. These adapters only support 2008-04-29 19:47:13 +00:00
brgphyreg.h Add support for the BCM5906[M] adapters. These adapters only support 2008-04-29 19:47:13 +00:00
ciphy.c Recognize Cicada CS8244 phy chip (among others, can be found on MPC8572DS 2008-04-26 18:07:24 +00:00
ciphyreg.h Add support Vitesse VSC8601 PHY that is found on nVidia network 2007-06-06 06:55:49 +00:00
e1000phy.c Reset autonegotation timer if media option is not IFM_AUTO. 2007-11-16 10:39:18 +00:00
e1000phyreg.h Add 88E1116/88E1116R PHY support code that takes the PHY out of 2007-10-29 05:50:22 +00:00
exphy.c - Take advantage of mii_phy_dev_probe(). 2007-01-12 23:17:43 +00:00
gentbi.c - Remove MIIF_NOISOLATE; there's generally no reason to let gentbi(4) 2007-10-29 21:11:55 +00:00
icsphy.c Add icsphy(4), Integrated Circuit Systems PHY driver, ported from 2007-06-11 02:04:50 +00:00
icsphyreg.h Add icsphy(4), Integrated Circuit Systems PHY driver, ported from 2007-06-11 02:04:50 +00:00
inphy.c Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table 2007-01-12 22:27:46 +00:00
inphyreg.h
ip1000phy.c Add support for IC Plus IP1001 PHY. 2008-04-05 00:52:07 +00:00
ip1000phyreg.h Add support for IC Plus IP1001 PHY. 2008-04-05 00:52:07 +00:00
lxtphy.c Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table 2007-01-12 22:27:46 +00:00
lxtphyreg.h
mii_physubr.c Remove mii_media_from_bmcr(); all previous users have been converted to 2007-01-13 00:14:45 +00:00
mii.c Define the miibus ivars as a structure, instead of as a vector of 2007-05-01 18:21:24 +00:00
mii.h
miibus_if.m
miidevs Add support for the BCM5906[M] adapters. These adapters only support 2008-04-29 19:47:13 +00:00
miivar.h Remove mii_media_from_bmcr(); all previous users have been converted to 2007-01-13 00:14:45 +00:00
mlphy.c Some style changes to a couple of PHY drivers: 2006-12-02 19:36:25 +00:00
nsgphy.c Add a helper function mii_phy_dev_probe(), which wraps around the 2006-12-02 15:32:34 +00:00
nsgphyreg.h
nsphy.c - Fix a typo in a comment. 2008-01-27 01:30:02 +00:00
nsphyreg.h
nsphyter.c Add a driver for the National Semiconductor DP83815, DP83843 and 2008-01-27 01:10:41 +00:00
nsphyterreg.h Add a driver for the National Semiconductor DP83815, DP83843 and 2008-01-27 01:10:41 +00:00
pnaphy.c Add a helper function mii_phy_dev_probe(), which wraps around the 2006-12-02 15:32:34 +00:00
qsphy.c Add a helper function mii_phy_dev_probe(), which wraps around the 2006-12-02 15:32:34 +00:00
qsphyreg.h
rgephy.c Add detection of isolation state. 2008-03-05 01:15:10 +00:00
rgephyreg.h Add support for RealTek RTL8211B(L) PHY. It's based on the patch 2007-10-29 02:17:07 +00:00
rlphy.c IEEE 802.3 Annex 28B.3 explicitly specifies the following relative 2007-11-16 10:25:36 +00:00
rlswitch.c MFp4: add basic driver for RTL8305SC switch in PHY emulation 2007-01-05 01:46:26 +00:00
ruephy.c - Take advantage of mii_phy_dev_probe() and mii_phy_setmedia(). 2007-01-13 00:06:41 +00:00
ruephyreg.h
tdkphy.c IEEE 802.3 Annex 28B.3 explicitly specifies the following relative 2007-11-16 10:25:36 +00:00
tdkphyreg.h
tlphy.c Some style changes to a couple of PHY drivers: 2006-12-02 19:36:25 +00:00
tlphyreg.h
ukphy_subr.c IEEE 802.3 Annex 28B.3 explicitly specifies the following relative 2007-11-16 10:25:36 +00:00
ukphy.c - Don't set MIIF_NOISOLATE so ukphy(4) can be used in configurations with 2007-01-20 00:52:29 +00:00
xmphy.c Some style changes to a couple of PHY drivers: 2006-12-02 19:36:25 +00:00
xmphyreg.h