freebsd-nq/sys/arm/amlogic/aml8726/aml8726_fb.c
2015-04-04 23:03:11 +00:00

472 lines
12 KiB
C

/*-
* Copyright 2013-2014 John Wehle <john@feith.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Amlogic aml8726 frame buffer driver.
*
* The current implementation has limited flexibility.
* For example only progressive scan is supported when
* using HDMI and the resolution / frame rate is not
* negotiated.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/conf.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/resource.h>
#include <sys/rman.h>
#include <sys/fbio.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <machine/bus.h>
#include <machine/cpu.h>
#include <machine/fdt.h>
#include <dev/fdt/fdt_common.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/fb/fbreg.h>
#include <dev/vt/vt.h>
#include <arm/amlogic/aml8726/aml8726_fb.h>
#include "fb_if.h"
enum aml8726_fb_output {
aml8726_unknown_fb_output,
aml8726_cvbs_fb_output,
aml8726_hdmi_fb_output,
aml8726_lcd_fb_output
};
struct aml8726_fb_clk {
uint32_t freq;
uint32_t video_pre;
uint32_t video_post;
uint32_t video_x;
uint32_t hdmi_tx;
uint32_t encp;
uint32_t enci;
uint32_t enct;
uint32_t encl;
uint32_t vdac0;
uint32_t vdac1;
};
struct aml8726_fb_softc {
device_t dev;
struct resource *res[4];
struct mtx mtx;
void *ih_cookie;
struct fb_info info;
enum aml8726_fb_output output;
struct aml8726_fb_clk clk;
};
static struct resource_spec aml8726_fb_spec[] = {
{ SYS_RES_MEMORY, 0, RF_ACTIVE }, /* CANVAS */
{ SYS_RES_MEMORY, 1, RF_ACTIVE }, /* VIU */
{ SYS_RES_MEMORY, 2, RF_ACTIVE }, /* VPP */
{ SYS_RES_IRQ, 1, RF_ACTIVE }, /* INT_VIU_VSYNC */
{ -1, 0 }
};
#define AML_FB_LOCK(sc) mtx_lock(&(sc)->mtx)
#define AML_FB_UNLOCK(sc) mtx_unlock(&(sc)->mtx)
#define AML_FB_LOCK_INIT(sc) \
mtx_init(&(sc)->mtx, device_get_nameunit((sc)->dev), \
"fb", MTX_DEF)
#define AML_FB_LOCK_DESTROY(sc) mtx_destroy(&(sc)->mtx);
#define CAV_WRITE_4(sc, reg, val) bus_write_4((sc)->res[0], reg, (val))
#define CAV_READ_4(sc, reg) bus_read_4((sc)->res[0], reg)
#define CAV_BARRIER(sc, reg) bus_barrier((sc)->res[0], reg, 4, \
(BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE))
#define VIU_WRITE_4(sc, reg, val) bus_write_4((sc)->res[1], reg, (val))
#define VIU_READ_4(sc, reg) bus_read_4((sc)->res[1], reg)
#define VPP_WRITE_4(sc, reg, val) bus_write_4((sc)->res[2], reg, (val))
#define VPP_READ_4(sc, reg) bus_read_4((sc)->res[2], reg)
#define CLK_WRITE_4(sc, reg, val) bus_write_4((sc)->res[X], reg, (val))
#define CLK_READ_4(sc, reg) bus_read_4((sc)->res[X], reg)
#define AML_FB_CLK_FREQ_SD 1080
#define AML_FB_CLK_FREQ_HD 1488
static void
aml8726_fb_cfg_output(struct aml8726_fb_softc *sc)
{
/* XXX */
}
static void
aml8726_fb_cfg_video(struct aml8726_fb_softc *sc)
{
uint32_t value;
/*
* basic initialization
*
* The fifo depth is in units of 8 so programming 32
* sets the depth to 256.
*/
value = (32 << AML_VIU_OSD_FIFO_CTRL_DEPTH_SHIFT);
value |= AML_VIU_OSD_FIFO_CTRL_BURST_LEN_64;
value |= (4 << AML_VIU_OSD_FIFO_CTRL_HOLD_LINES_SHIFT);
VIU_WRITE_4(sc, AML_VIU_OSD1_FIFO_CTRL_REG, value);
VIU_WRITE_4(sc, AML_VIU_OSD2_FIFO_CTRL_REG, value);
value = VPP_READ_4(sc, AML_VPP_MISC_REG);
value &= ~AML_VPP_MISC_PREBLEND_EN;
value |= AML_VPP_MISC_POSTBLEND_EN;
value &= ~(AML_VPP_MISC_OSD1_POSTBLEND | AML_VPP_MISC_OSD2_POSTBLEND
| AML_VPP_MISC_VD1_POSTBLEND | AML_VPP_MISC_VD2_POSTBLEND);
VPP_WRITE_4(sc, AML_VPP_MISC_REG, value);
value = AML_VIU_OSD_CTRL_OSD_EN;
value |= (0xff << AML_VIU_OSD_CTRL_GLOBAL_ALPHA_SHIFT);
VIU_WRITE_4(sc, AML_VIU_OSD1_CTRL_REG, value);
VIU_WRITE_4(sc, AML_VIU_OSD2_CTRL_REG, value);
/* color mode for OSD1 block 0 */
value = (AML_CAV_OSD1_INDEX << AML_VIU_OSD_BLK_CFG_W0_INDEX_SHIFT)
| AML_VIU_OSD_BLK_CFG_W0_LITTLE_ENDIAN
| AML_VIU_OSD_BLK_CFG_W0_BLKMODE_24
| AML_VIU_OSD_BLK_CFG_W0_RGB_EN
| AML_VIU_OSD_BLK_CFG_W0_CMATRIX_RGB;
VIU_WRITE_4(sc, AML_VIU_OSD1_BLK0_CFG_W0_REG, value);
/* geometry / scaling for OSD1 block 0 */
value = ((sc->info.fb_width - 1) << AML_VIU_OSD_BLK_CFG_W1_X_END_SHIFT)
& AML_VIU_OSD_BLK_CFG_W1_X_END_MASK;
value |= (0 << AML_VIU_OSD_BLK_CFG_W1_X_START_SHIFT)
& AML_VIU_OSD_BLK_CFG_W1_X_START_MASK;
VIU_WRITE_4(sc, AML_VIU_OSD1_BLK0_CFG_W1_REG, value);
value = ((sc->info.fb_height - 1) << AML_VIU_OSD_BLK_CFG_W2_Y_END_SHIFT)
& AML_VIU_OSD_BLK_CFG_W2_Y_END_MASK;
value |= (0 << AML_VIU_OSD_BLK_CFG_W2_Y_START_SHIFT)
& AML_VIU_OSD_BLK_CFG_W2_Y_START_MASK;
VIU_WRITE_4(sc, AML_VIU_OSD1_BLK0_CFG_W2_REG, value);
value = ((sc->info.fb_width - 1) << AML_VIU_OSD_BLK_CFG_W3_H_END_SHIFT)
& AML_VIU_OSD_BLK_CFG_W3_H_END_MASK;
value |= (0 << AML_VIU_OSD_BLK_CFG_W3_H_START_SHIFT)
& AML_VIU_OSD_BLK_CFG_W3_H_START_MASK;
VIU_WRITE_4(sc, AML_VIU_OSD1_BLK0_CFG_W3_REG, value);
value = ((sc->info.fb_height - 1) << AML_VIU_OSD_BLK_CFG_W4_V_END_SHIFT)
& AML_VIU_OSD_BLK_CFG_W4_V_END_MASK;
value |= (0 << AML_VIU_OSD_BLK_CFG_W4_V_START_SHIFT)
& AML_VIU_OSD_BLK_CFG_W4_V_START_MASK;
VIU_WRITE_4(sc, AML_VIU_OSD1_BLK0_CFG_W4_REG, value);
/* Enable the OSD block now that it's fully configured */
value = VIU_READ_4(sc, AML_VIU_OSD1_CTRL_REG);
value &= ~AML_VIU_OSD_CTRL_OSD_BLK_EN_MASK;
value |= 1 << AML_VIU_OSD_CTRL_OSD_BLK_EN_SHIFT;
VIU_WRITE_4(sc, AML_VIU_OSD1_CTRL_REG, value);
/* enable video processing of OSD1 */
value = VPP_READ_4(sc, AML_VPP_MISC_REG);
value |= AML_VPP_MISC_OSD1_POSTBLEND;
VPP_WRITE_4(sc, AML_VPP_MISC_REG, value);
}
static void
aml8726_fb_cfg_canvas(struct aml8726_fb_softc *sc)
{
uint32_t value;
uint32_t width;
/*
* The frame buffer address and width are programmed in units of 8
* (meaning they need to be aligned and the actual values divided
* by 8 prior to programming the hardware).
*/
width = (uint32_t)sc->info.fb_stride / 8;
/* lower bits of the width */
value = (width << AML_CAV_LUT_DATAL_WIDTH_SHIFT) &
AML_CAV_LUT_DATAL_WIDTH_MASK;
/* physical address */
value |= (uint32_t)sc->info.fb_pbase / 8;
CAV_WRITE_4(sc, AML_CAV_LUT_DATAL_REG, value);
/* upper bits of the width */
value = ((width >> AML_CAV_LUT_DATAL_WIDTH_WIDTH) <<
AML_CAV_LUT_DATAH_WIDTH_SHIFT) & AML_CAV_LUT_DATAH_WIDTH_MASK;
/* height */
value |= ((uint32_t)sc->info.fb_height <<
AML_CAV_LUT_DATAH_HEIGHT_SHIFT) & AML_CAV_LUT_DATAH_HEIGHT_MASK;
/* mode */
value |= AML_CAV_LUT_DATAH_BLKMODE_LINEAR;
CAV_WRITE_4(sc, AML_CAV_LUT_DATAH_REG, value);
CAV_WRITE_4(sc, AML_CAV_LUT_ADDR_REG, (AML_CAV_LUT_ADDR_WR_EN |
(AML_CAV_OSD1_INDEX << AML_CAV_LUT_ADDR_INDEX_SHIFT)));
CAV_BARRIER(sc, AML_CAV_LUT_ADDR_REG);
}
static void
aml8726_fb_intr(void *arg)
{
struct aml8726_fb_softc *sc = (struct aml8726_fb_softc *)arg;
AML_FB_LOCK(sc);
AML_FB_UNLOCK(sc);
}
static int
aml8726_fb_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (!ofw_bus_is_compatible(dev, "amlogic,aml8726-fb"))
return (ENXIO);
device_set_desc(dev, "Amlogic aml8726 FB");
return (BUS_PROBE_DEFAULT);
}
static int
aml8726_fb_attach(device_t dev)
{
struct aml8726_fb_softc *sc = device_get_softc(dev);
int error;
device_t child;
pcell_t prop;
phandle_t node;
sc->dev = dev;
sc->info.fb_name = device_get_nameunit(sc->dev);
node = ofw_bus_get_node(dev);
if (OF_getencprop(node, "width", &prop, sizeof(prop)) <= 0) {
device_printf(dev, "missing width attribute in FDT\n");
return (ENXIO);
}
if ((prop % 8) != 0) {
device_printf(dev,
"width attribute in FDT must be a multiple of 8\n");
return (ENXIO);
}
sc->info.fb_width = prop;
if (OF_getencprop(node, "height", &prop, sizeof(prop)) <= 0) {
device_printf(dev, "missing height attribute in FDT\n");
return (ENXIO);
}
sc->info.fb_height = prop;
if (OF_getencprop(node, "depth", &prop, sizeof(prop)) <= 0) {
device_printf(dev, "missing depth attribute in FDT\n");
return (ENXIO);
}
if (prop != 24) {
device_printf(dev,
"depth attribute in FDT is an unsupported value\n");
return (ENXIO);
}
sc->info.fb_depth = prop;
sc->info.fb_bpp = prop;
if (OF_getencprop(node, "linebytes", &prop, sizeof(prop)) <= 0) {
device_printf(dev, "missing linebytes attribute in FDT\n");
return (ENXIO);
}
if ((prop % 8) != 0) {
device_printf(dev,
"linebytes attribute in FDT must be a multiple of 8\n");
return (ENXIO);
}
if (prop < (sc->info.fb_width * 3)) {
device_printf(dev,
"linebytes attribute in FDT is too small\n");
return (ENXIO);
}
sc->info.fb_stride = prop;
if (OF_getencprop(node, "address", &prop, sizeof(prop)) <= 0) {
device_printf(dev, "missing address attribute in FDT\n");
return (ENXIO);
}
if ((prop % 8) != 0) {
device_printf(dev,
"address attribute in FDT must be a multiple of 8\n");
return (ENXIO);
}
sc->info.fb_pbase = prop;
sc->info.fb_size = sc->info.fb_height * sc->info.fb_stride;
sc->info.fb_vbase = (intptr_t)pmap_mapdev(sc->info.fb_pbase,
sc->info.fb_size);
if (bus_alloc_resources(dev, aml8726_fb_spec, sc->res)) {
device_printf(dev, "could not allocate resources for device\n");
pmap_unmapdev(sc->info.fb_vbase, sc->info.fb_size);
return (ENXIO);
}
aml8726_fb_cfg_output(sc);
aml8726_fb_cfg_video(sc);
aml8726_fb_cfg_canvas(sc);
AML_FB_LOCK_INIT(sc);
error = bus_setup_intr(dev, sc->res[3], INTR_TYPE_MISC | INTR_MPSAFE,
NULL, aml8726_fb_intr, sc, &sc->ih_cookie);
if (error) {
device_printf(dev, "could not setup interrupt handler\n");
goto fail;
}
child = device_add_child(dev, "fbd", device_get_unit(dev));
if (!child) {
device_printf(dev, "could not add fbd\n");
error = ENXIO;
goto fail;
}
error = device_probe_and_attach(child);
if (error) {
device_printf(dev, "could not attach fbd\n");
goto fail;
}
return (0);
fail:
if (sc->ih_cookie)
bus_teardown_intr(dev, sc->res[3], sc->ih_cookie);
AML_FB_LOCK_DESTROY(sc);
bus_release_resources(dev, aml8726_fb_spec, sc->res);
pmap_unmapdev(sc->info.fb_vbase, sc->info.fb_size);
return (error);
}
static int
aml8726_fb_detach(device_t dev)
{
struct aml8726_fb_softc *sc = device_get_softc(dev);
bus_generic_detach(dev);
bus_teardown_intr(dev, sc->res[3], sc->ih_cookie);
AML_FB_LOCK_DESTROY(sc);
bus_release_resources(dev, aml8726_fb_spec, sc->res);
pmap_unmapdev(sc->info.fb_vbase, sc->info.fb_size);
return (0);
}
static struct fb_info *
aml8726_fb_getinfo(device_t dev)
{
struct aml8726_fb_softc *sc = device_get_softc(dev);
return (&sc->info);
}
static device_method_t aml8726_fb_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, aml8726_fb_probe),
DEVMETHOD(device_attach, aml8726_fb_attach),
DEVMETHOD(device_detach, aml8726_fb_detach),
/* FB interface */
DEVMETHOD(fb_getinfo, aml8726_fb_getinfo),
DEVMETHOD_END
};
static driver_t aml8726_fb_driver = {
"fb",
aml8726_fb_methods,
sizeof(struct aml8726_fb_softc),
};
static devclass_t aml8726_fb_devclass;
DRIVER_MODULE(fb, simplebus, aml8726_fb_driver, aml8726_fb_devclass, 0, 0);