freebsd-nq/share/man/man4/screen.4
Sheldon Hearn 6d249eee27 Remove single-space hard sentence breaks. These degrade the quality
of the typeset output, tend to make diffs harder to read and provide
bad examples for new-comers to mdoc.
2000-03-01 14:50:24 +00:00

177 lines
4.7 KiB
Groff
Raw Blame History

.\"
.\" $FreeBSD$
.\"
.Dd January 8, 1995
.Dt SCREEN 4
.Os FreeBSD
.Sh NAME
.Nm screen
.Nd pc display interface
.Sh DESCRIPTION
Access to the
.Ar virtual consoles
are obtained through the device files
ttyv0 - ttyvb in
.Pa /dev .
Each of these files correspond to a separate
virtual console.
All virtual console devices can be open at once, but only one is
active at a time.
The active virtual console "owns" the keyboard and
display screen.
.Pp
Output to a virtual console that not currently is on the display is
saved in a buffer that holds a "screenfull" (normally 25) lines.
Any output written to
.Pa /dev/console
(the original console device) is echoed to
.Pa /dev/ttyv0.
.Pp
To switch between the virtual consoles one uses the sequence
.Ar ALT+Fn
, which means hold down ALT and press one of the function keys.
The
virtual console with the same number as the function key is then
selected as the current virtual console, and given exclusive use of
the keyboard and display.
This switch sequence can be changed via
the keyboard mapping ioctl call (see keyboard.4)
.Pp
The console allows entering values that are not physically
present on the keyboard via a special keysequence.
To use this facility press and hold down ALT,
then enter a decimal number from 0-255 via the numerical keypad, then
release ALT.
The entered value is then used as the ASCII value for one
character.
This way it is possible to enter any ASCII value.
The console driver also includes a history function.
It is activated by
pressing the scroll-lock key.
This holds the display, and enables the cursor
arrows for scrolling up and down through the last scrolled out lines.
The console understands a subset of the ANSI x3.64 character
sequences.
For compatibility with the old pccons, the PC3 character
sequences is also supported.
.Pp
.Bd -literal
ANSI Seq Function Termcap entry
======= ======= ===================================== ==============
-- E7 Save cursor position sc
-- E8 Restore saved cursor position rc
CUU E[nA move cursor up n lines up/UP (ku)
CUD E[nB move cursor down n lines do/DO (kd)
CUF E[nC move cursor right n characters nd/RI (kr)
CUB E[nD move cursor left n characters --/LE (kl)
HPA E[n` move cursor to character position n ch
HPR E[na move cursor right n characters --
VPA E[nd move cursor to line n cv
VPR E[ne move cursor down n lines --
CPL E[nF move cursor to start of line, -- (@7)
n lines up
CNL E[nE move cursor to start of line, nw
n lines down
CUP E[y;xH Move cursor to x, y cm
HVP E[y;xf Move cursor to x, y --
CBT E[nZ Move cursor back n tab stops bt (kB)
IL E[nL Insert n blank lines al/AL
ICH E[n@ Insert n blank characters ic/IC
DL E[nM Delete n lines dl/DL
DCH E[nP Delete n characters dc/DC
ED E[nJ Erase part or all of display: cd
n=0 from cursor to end of display,
n=1 from begin of display to cursor,
n=2 entire display.
EL E[nK Erase part or all of line: ce
n=0 from cursor to end of line,
n=1 from begin of line to cursor,
n=2 entire line.
ECH E[nX Erase n characters ec
SU E[nS Scroll display n lines up (forward) sf/SF
SD E[nT Scroll display n lines down (reverse) sr/SR
SGR E[nm Set character attributes: --
n= 0 normal attribute (all off)
n= 1 bold (highlight)
n= 4 underscore (if supported by HW)
n= 5 blink (if supported by HW)
n= 7 reverse
n=3X set foreground color (see table)
n=4X set background color (see table)
X=0 black X=1 red
X=2 green X=3 brown
X=4 blue X=5 magenta
X=6 cyan X=7 white
-- E[s Save cursor position sc
-- E[u Restore saved cursor position rc
-- E[=p;dB Set bell pitch (p) and duration (d), --
picth is in units of 840 nS,
duration is units of 0,1 S.
-- E[=tC Set cursor type, 1 selects a blinking --
cursor, 0 a steady cursor.
-- E[=nA Set the border color to color n
(see table) (if supported by HW)
-- E[=nF set normal foreground color to n --
(see table)
-- E[=nG set normal background color to n --
(see table)
-- E[=nH set reverse foreground color to n --
(see table)
-- E[=nI set reverse background color to n --
(see table)
n= 0 black n= 8 grey
n= 1 blue n= 9 light blue
n= 2 green n=10 light green
n= 3 cyan n=11 light cyan
n= 4 red n=12 light red
n= 5 magenta n=13 light magenta
n= 6 brown n=14 yellow
n= 7 white n=15 light white
note: the first E in the sequences stands for ESC (0x1b)
.Ed
.Pp
.Sh AUTHORS
.An S<EFBFBD>ren Schmidt Aq sos@FreeBSD.org