freebsd with flexible iflib nic queues
4d494753eb
- Rename rt2560_read_eeprom to rt2560_read_config, we already have rt2560_eeprom_read - If hardware gives us wrong encryption done index, shout out loudly and terminate the processing loop - Process encryption done if RX done bit is set in interrupt status register (according to Ralink Linux driver) - Turn VALID/BUSY bits in TX descriptor only after TX descriptor is fully setup - Fix BBP read: RT2560_BBPCSR can't be written until its RT2560_BBP_BUSY bit is off (according to Ralink Linux driver) - Skip invalid (0 of 0xffff) BBP register/value entries stored in EEPROM - Fix channel TX power location in EEPROM, if channel TX power is above 31 set it to 24 (TX power only has 5bits in RF register, "24" is according to Ralink Linux driver) - Configure BBP according to the BBP register/value stored in EEPROM, restore BBP17 (RX sensitivity tuning) to default value after this. - Set TX/RX antenna after BBP is initialized; these two operation will try to set BBP registers - Reconfigure ACK TX time registers according to 802.11g standard (TX @36Mb, other side's ACK should be sent @24Mb). - 2560 parts have two TX ring: one for management/control packets, one for data packets. Add private OACTIVE flag for each of them. Turn on IFF_DRV_OACTIVE if one of private OACTIVE is on; turn off IFF_DRV_OACTIVE iff all of them are off. - Rework watchdog to mimic old if_watchdog action. Process TX done/encryption done in watchdog function (according to Ralink Linux driver) Obtained from: DragonFly Approved by: sam (mentor) Tested by: sam Related to PR: kern/117655 # Forcing long slot time setting is not included in this commit, comment and # related code is in place, so if problem pops up, quick tests could be done. |
||
---|---|---|
bin | ||
cddl | ||
compat/opensolaris | ||
contrib | ||
crypto | ||
etc | ||
games | ||
gnu | ||
include | ||
kerberos5 | ||
lib | ||
libexec | ||
release | ||
rescue | ||
sbin | ||
secure | ||
share | ||
sys | ||
tools | ||
usr.bin | ||
usr.sbin | ||
COPYRIGHT | ||
LOCKS | ||
MAINTAINERS | ||
Makefile | ||
Makefile.inc1 | ||
ObsoleteFiles.inc | ||
README | ||
UPDATING |
This is the top level of the FreeBSD source directory. This file was last revised on: $FreeBSD$ For copyright information, please see the file COPYRIGHT in this directory (additional copyright information also exists for some sources in this tree - please see the specific source directories for more information). The Makefile in this directory supports a number of targets for building components (or all) of the FreeBSD source tree, the most commonly used one being ``world'', which rebuilds and installs everything in the FreeBSD system from the source tree except the kernel, the kernel-modules and the contents of /etc. The ``world'' target should only be used in cases where the source tree has not changed from the currently running version. See: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html for more information, including setting make(1) variables. The ``buildkernel'' and ``installkernel'' targets build and install the kernel and the modules (see below). Please see the top of the Makefile in this directory for more information on the standard build targets and compile-time flags. Building a kernel is a somewhat more involved process, documentation for which can be found at: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html And in the config(8) man page. Note: If you want to build and install the kernel with the ``buildkernel'' and ``installkernel'' targets, you might need to build world before. More information is available in the handbook. The sample kernel configuration files reside in the sys/<arch>/conf sub-directory (assuming that you've installed the kernel sources), the file named GENERIC being the one used to build your initial installation kernel. The file NOTES contains entries and documentation for all possible devices, not just those commonly used. It is the successor of the ancient LINT file, but in contrast to LINT, it is not buildable as a kernel but a pure reference and documentation file. Source Roadmap: --------------- bin System/user commands. contrib Packages contributed by 3rd parties. crypto Cryptography stuff (see crypto/README). etc Template files for /etc. games Amusements. gnu Various commands and libraries under the GNU Public License. Please see gnu/COPYING* for more information. include System include files. kerberos5 Kerberos5 (Heimdal) package. lib System libraries. libexec System daemons. release Release building Makefile & associated tools. rescue Build system for statically linked /rescue utilities. sbin System commands. secure Cryptographic libraries and commands. share Shared resources. sys Kernel sources. tools Utilities for regression testing and miscellaneous tasks. usr.bin User commands. usr.sbin System administration commands. For information on synchronizing your source tree with one or more of the FreeBSD Project's development branches, please see: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/synching.html