9b63136347
This is an architecture that present a thing message passing interface to the OS. You can query as to how many ports and what kind are attached and enable them and so on. A less grand view is that this is just another way to package SCSI (SPI or FC) and FC-IP into a one-driver interface set. This driver support the following hardware: LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only) LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only) LSI 53c1020: Single Channel, Ultra4 (320M) (Untested) LSI 53c1030: Dual Channel, Ultra4 (320M) Currently it's in fair shape, but expect a lot of changes over the next few weeks as it stabilizes. Credits: The driver is mostly from some folks from Jeff Roberson's company- I've been slowly migrating it to broader support that I it came to me as. The hardware used in developing support came from: FC909: LSI-Logic, Advansys (now Connetix) FC929: LSI-Logic 53c1030: Antares Microsystems (they make a very fine board!) MFC after: 3 weeks
639 lines
16 KiB
C
639 lines
16 KiB
C
/* $FreeBSD$ */
|
|
/*
|
|
* PCI specific probe and attach routines for LSI '909 FC adapters.
|
|
* FreeBSD Version.
|
|
*
|
|
* Copyright (c) 2000, 2001 by Greg Ansley
|
|
* Partially derived from Matt Jacob's ISP driver.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice immediately at the beginning of the file, without modification,
|
|
* this list of conditions, and the following disclaimer.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
/*
|
|
* Additional Copyright (c) 2002 by Matthew Jacob under same license.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/module.h>
|
|
#include <pci/pcireg.h>
|
|
#include <pci/pcivar.h>
|
|
|
|
#include <machine/bus_memio.h>
|
|
#include <machine/bus_pio.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <dev/mpt/mpt.h>
|
|
#include <dev/mpt/mpt_freebsd.h>
|
|
|
|
#ifndef PCI_VENDOR_LSI
|
|
#define PCI_VENDOR_LSI 0x1000
|
|
#endif
|
|
|
|
#ifndef PCI_PRODUCT_LSI_FC909
|
|
#define PCI_PRODUCT_LSI_FC909 0x0620
|
|
#endif
|
|
|
|
#ifndef PCI_PRODUCT_LSI_FC929
|
|
#define PCI_PRODUCT_LSI_FC929 0x0622
|
|
#endif
|
|
|
|
#ifndef PCI_PRODUCT_LSI_1030
|
|
#define PCI_PRODUCT_LSI_1030 0x0030
|
|
#endif
|
|
|
|
|
|
|
|
#define MEM_MAP_REG 0x14
|
|
#define MEM_MAP_SRAM 0x1C
|
|
|
|
static int mpt_probe(device_t);
|
|
static int mpt_attach(device_t);
|
|
static void mpt_free_bus_resources(struct mpt_softc *mpt);
|
|
static int mpt_detach(device_t);
|
|
static int mpt_shutdown(device_t);
|
|
static int mpt_dma_mem_alloc(struct mpt_softc *mpt);
|
|
static void mpt_dma_mem_free(struct mpt_softc *mpt);
|
|
static void mpt_read_config_regs(struct mpt_softc *mpt);
|
|
|
|
static device_method_t mpt_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, mpt_probe),
|
|
DEVMETHOD(device_attach, mpt_attach),
|
|
DEVMETHOD(device_detach, mpt_detach),
|
|
DEVMETHOD(device_shutdown, mpt_shutdown),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t mpt_driver = {
|
|
"mpt", mpt_methods, sizeof (struct mpt_softc)
|
|
};
|
|
static devclass_t mpt_devclass;
|
|
DRIVER_MODULE(mpt, pci, mpt_driver, mpt_devclass, 0, 0);
|
|
MODULE_VERSION(mpt, 1);
|
|
|
|
int
|
|
mpt_intr(void *dummy)
|
|
{
|
|
u_int32_t reply;
|
|
struct mpt_softc *mpt = (struct mpt_softc *)dummy;
|
|
|
|
reply = mpt_pop_reply_queue(mpt);
|
|
while (reply != MPT_REPLY_EMPTY) {
|
|
if (mpt->verbose > 1) {
|
|
if ((reply & MPT_CONTEXT_REPLY) != 0) {
|
|
/* Address reply; IOC has something to say */
|
|
mpt_print_reply(MPT_REPLY_PTOV(mpt, reply));
|
|
} else {
|
|
/* Context reply ; all went well */
|
|
device_printf(mpt->dev,
|
|
"context %u reply OK\n", reply);
|
|
}
|
|
}
|
|
mpt_done(mpt, reply);
|
|
reply = mpt_pop_reply_queue(mpt);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mpt_probe(device_t dev)
|
|
{
|
|
char *desc;
|
|
|
|
if (pci_get_vendor(dev) != PCI_VENDOR_LSI)
|
|
return (ENXIO);
|
|
|
|
switch ((pci_get_device(dev) & ~1)) {
|
|
case PCI_PRODUCT_LSI_FC909:
|
|
desc = "LSILogic FC909 FC Adapter";
|
|
break;
|
|
case PCI_PRODUCT_LSI_FC929:
|
|
desc = "LSILogic FC929 FC Adapter";
|
|
break;
|
|
case PCI_PRODUCT_LSI_1030:
|
|
desc = "LSILogic 1030 Ultra4 Adapter";
|
|
break;
|
|
default:
|
|
return (ENXIO);
|
|
}
|
|
|
|
device_set_desc(dev, desc);
|
|
return (0);
|
|
}
|
|
|
|
#ifdef RELENG_4
|
|
static void
|
|
mpt_set_options(struct mpt_softc *mpt)
|
|
{
|
|
int bitmap;
|
|
|
|
bitmap = 0;
|
|
if (getenv_int("mpt_disable", &bitmap)) {
|
|
if (bitmap & (1 << mpt->unit)) {
|
|
mpt->disabled = 1;
|
|
}
|
|
}
|
|
|
|
bitmap = 0;
|
|
if (getenv_int("mpt_debug", &bitmap)) {
|
|
if (bitmap & (1 << mpt->unit)) {
|
|
mpt->verbose = 2;
|
|
}
|
|
}
|
|
|
|
cmd = pci_read_config(dev, PCIR_COMMAND, 2);
|
|
}
|
|
#else
|
|
static void
|
|
mpt_set_options(struct mpt_softc *mpt)
|
|
{
|
|
int tval;
|
|
|
|
tval = 0;
|
|
if (resource_int_value(device_get_name(mpt->dev),
|
|
device_get_unit(mpt->dev), "disable", &tval) == 0 && tval != 0) {
|
|
mpt->disabled = 1;
|
|
}
|
|
tval = 0;
|
|
if (resource_int_value(device_get_name(mpt->dev),
|
|
device_get_unit(mpt->dev), "debug", &tval) == 0 && tval != 0) {
|
|
mpt->verbose += tval;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
|
|
static int
|
|
mpt_attach(device_t dev)
|
|
{
|
|
int iqd;
|
|
u_int32_t data, cmd;
|
|
struct mpt_softc *mpt;
|
|
|
|
/* Allocate the softc structure */
|
|
mpt = (struct mpt_softc*) device_get_softc(dev);
|
|
if (mpt == NULL) {
|
|
device_printf(dev, "cannot allocate softc\n");
|
|
return (ENOMEM);
|
|
}
|
|
bzero(mpt, sizeof (struct mpt_softc));
|
|
switch ((pci_get_device(dev) & ~1)) {
|
|
case PCI_PRODUCT_LSI_FC909:
|
|
case PCI_PRODUCT_LSI_FC929:
|
|
mpt->is_fc = 1;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
mpt->dev = dev;
|
|
mpt->unit = device_get_unit(dev);
|
|
mpt_set_options(mpt);
|
|
mpt->verbose += (bootverbose != 0)? 1 : 0;
|
|
|
|
/* Make sure memory access decoders are enabled */
|
|
cmd = pci_read_config(dev, PCIR_COMMAND, 2);
|
|
if ((cmd & PCIM_CMD_MEMEN) == 0) {
|
|
device_printf(dev, "Memory accesses disabled");
|
|
goto bad;
|
|
}
|
|
|
|
/*
|
|
* Make sure that SERR, PERR, WRITE INVALIDATE and BUSMASTER are set.
|
|
*/
|
|
cmd |=
|
|
PCIM_CMD_SERRESPEN | PCIM_CMD_PERRESPEN |
|
|
PCIM_CMD_BUSMASTEREN | PCIM_CMD_MWRICEN;
|
|
pci_write_config(dev, PCIR_COMMAND, cmd, 2);
|
|
|
|
/*
|
|
* Make sure we've disabled the ROM.
|
|
*/
|
|
data = pci_read_config(dev, PCIR_BIOS, 4);
|
|
data &= ~1;
|
|
pci_write_config(dev, PCIR_BIOS, data, 4);
|
|
|
|
|
|
/* Is this part a dual? */
|
|
if ((pci_get_device(dev) & ~1) == PCI_PRODUCT_LSI_FC929) {
|
|
/* Yes; is the previous device the counterpart? */
|
|
if (mpt->unit) {
|
|
mpt->mpt2 = (struct mpt_softc *)
|
|
devclass_get_softc(mpt_devclass, mpt->unit-1);
|
|
|
|
if ((mpt->mpt2->mpt2 == NULL)
|
|
&& (pci_get_vendor(mpt->mpt2->dev) == PCI_VENDOR_LSI)
|
|
&& ((pci_get_device(mpt->mpt2->dev) & ~1) == PCI_PRODUCT_LSI_FC929) ) {
|
|
/* Yes */
|
|
mpt->mpt2->mpt2 = mpt;
|
|
if (mpt->verbose) {
|
|
device_printf(dev, "Detected dual\n");
|
|
}
|
|
} else {
|
|
/* Nope */
|
|
mpt->mpt2 = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Set up the memory regions */
|
|
/* Allocate kernel virtual memory for the 9x9's Mem0 region */
|
|
mpt->pci_reg_id = MEM_MAP_REG;
|
|
mpt->pci_reg = bus_alloc_resource(dev, SYS_RES_MEMORY,
|
|
&mpt->pci_reg_id, 0, ~0, 0, RF_ACTIVE);
|
|
if (mpt->pci_reg == NULL) {
|
|
device_printf(dev, "unable to map any ports\n");
|
|
goto bad;
|
|
}
|
|
mpt->pci_st = rman_get_bustag(mpt->pci_reg);
|
|
mpt->pci_sh = rman_get_bushandle(mpt->pci_reg);
|
|
/* Get the Physical Address */
|
|
mpt->pci_pa = rman_get_start(mpt->pci_reg);
|
|
|
|
/* Get a handle to the interrupt */
|
|
iqd = 0;
|
|
mpt->pci_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &iqd, 0, ~0,
|
|
1, RF_ACTIVE | RF_SHAREABLE);
|
|
if (mpt->pci_irq == NULL) {
|
|
device_printf(dev, "could not allocate interrupt\n");
|
|
goto bad;
|
|
}
|
|
|
|
/* Register the interrupt handler */
|
|
if (bus_setup_intr(dev, mpt->pci_irq,
|
|
INTR_TYPE_CAM, (void (*)(void *))mpt_intr,
|
|
mpt, &mpt->ih)) {
|
|
device_printf(dev, "could not setup interrupt\n");
|
|
goto bad;
|
|
}
|
|
|
|
/* Disable interrupts at the part */
|
|
mpt_disable_ints(mpt);
|
|
|
|
/* Allocate dma memory */
|
|
if (mpt_dma_mem_alloc(mpt)) {
|
|
device_printf(dev, "Could not allocate DMA memory\n");
|
|
goto bad;
|
|
}
|
|
|
|
/* Initialize character device */
|
|
/* currently closed */
|
|
mpt->open = 0;
|
|
|
|
/* Save the PCI config register values */
|
|
/* Hard resets are known to screw up the BAR for diagnostic
|
|
memory accesses (Mem1). */
|
|
/* Using Mem1 is known to make the chip stop responding to
|
|
configuration space transfers, so we need to save it now */
|
|
mpt_read_config_regs(mpt);
|
|
|
|
/* Initialize the hardware */
|
|
if (mpt->disabled == 0) {
|
|
if (mpt_init(mpt, MPT_DB_INIT_HOST) != 0)
|
|
goto bad;
|
|
|
|
/* Attach to CAM */
|
|
mpt_cam_attach(mpt);
|
|
}
|
|
|
|
/* Done */
|
|
return (0);
|
|
|
|
bad:
|
|
mpt_dma_mem_free(mpt);
|
|
mpt_free_bus_resources(mpt);
|
|
|
|
/*
|
|
* but return zero to preserve unit numbering
|
|
*/
|
|
return (0);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* Free bus resources
|
|
*/
|
|
static void
|
|
mpt_free_bus_resources(struct mpt_softc *mpt)
|
|
{
|
|
if (mpt->ih) {
|
|
bus_teardown_intr(mpt->dev, mpt->pci_irq, mpt->ih);
|
|
mpt->ih = 0;
|
|
}
|
|
|
|
if (mpt->pci_irq) {
|
|
bus_release_resource(mpt->dev, SYS_RES_IRQ, 0, mpt->pci_irq);
|
|
mpt->pci_irq = 0;
|
|
}
|
|
|
|
if (mpt->pci_reg) {
|
|
bus_release_resource(mpt->dev, SYS_RES_MEMORY, mpt->pci_reg_id,
|
|
mpt->pci_reg);
|
|
mpt->pci_reg = 0;
|
|
}
|
|
if (mpt->pci_mem) {
|
|
bus_release_resource(mpt->dev, SYS_RES_MEMORY, mpt->pci_mem_id,
|
|
mpt->pci_mem);
|
|
mpt->pci_mem = 0;
|
|
}
|
|
|
|
}
|
|
|
|
|
|
/******************************************************************************
|
|
* Disconnect ourselves from the system.
|
|
*/
|
|
static int
|
|
mpt_detach(device_t dev)
|
|
{
|
|
struct mpt_softc *mpt;
|
|
mpt = (struct mpt_softc*) device_get_softc(dev);
|
|
|
|
device_printf(mpt->dev,"mpt_detach!\n");
|
|
|
|
if (mpt) {
|
|
mpt_disable_ints(mpt);
|
|
mpt_cam_detach(mpt);
|
|
mpt_reset(mpt);
|
|
mpt_dma_mem_free(mpt);
|
|
mpt_free_bus_resources(mpt);
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
|
|
/******************************************************************************
|
|
* Disable the hardware
|
|
*/
|
|
static int
|
|
mpt_shutdown(device_t dev)
|
|
{
|
|
struct mpt_softc *mpt;
|
|
mpt = (struct mpt_softc*) device_get_softc(dev);
|
|
|
|
if (mpt) {
|
|
mpt_reset(mpt);
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
|
|
struct imush {
|
|
struct mpt_softc *mpt;
|
|
int error;
|
|
u_int32_t phys;
|
|
};
|
|
|
|
static void
|
|
mpt_map_rquest(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
|
{
|
|
struct imush *imushp = (struct imush *) arg;
|
|
imushp->error = error;
|
|
imushp->phys = segs->ds_addr;
|
|
}
|
|
|
|
|
|
static int
|
|
mpt_dma_mem_alloc(struct mpt_softc *mpt)
|
|
{
|
|
int i, error;
|
|
u_char *vptr;
|
|
u_int32_t pptr, end;
|
|
struct imush im;
|
|
device_t dev = mpt->dev;
|
|
|
|
/* Check if we alreay have allocated the reply memory */
|
|
if (mpt->reply_phys != NULL)
|
|
return 0;
|
|
|
|
/*
|
|
* Create a dma tag for this device
|
|
*
|
|
* Align at page boundaries, limit to 32-bit addressing
|
|
* (The chip supports 64-bit addressing, but this driver doesn't)
|
|
*/
|
|
if (bus_dma_tag_create(NULL, PAGE_SIZE, 0, BUS_SPACE_MAXADDR_32BIT,
|
|
BUS_SPACE_MAXADDR, NULL, NULL, BUS_SPACE_MAXSIZE_32BIT,
|
|
BUS_SPACE_MAXSIZE_32BIT, BUS_SPACE_UNRESTRICTED, 0,
|
|
&mpt->parent_dmat) != 0) {
|
|
device_printf(dev, "cannot create parent dma tag\n");
|
|
return (1);
|
|
}
|
|
|
|
/* Create a child tag for reply buffers */
|
|
if (bus_dma_tag_create(mpt->parent_dmat, PAGE_SIZE,
|
|
0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
|
|
NULL, NULL, PAGE_SIZE, 1, BUS_SPACE_MAXSIZE_32BIT, 0,
|
|
&mpt->reply_dmat) != 0) {
|
|
device_printf(dev, "cannot create a dma tag for replies\n");
|
|
return (1);
|
|
}
|
|
|
|
/* Allocate some DMA accessable memory for replies */
|
|
if (bus_dmamem_alloc(mpt->reply_dmat, (void **)&mpt->reply,
|
|
BUS_DMA_NOWAIT, &mpt->reply_dmap) != 0) {
|
|
device_printf(dev, "cannot allocate %d bytes of reply memory\n",
|
|
PAGE_SIZE);
|
|
return (1);
|
|
}
|
|
|
|
im.mpt = mpt;
|
|
im.error = 0;
|
|
|
|
/* Load and lock it into "bus space" */
|
|
bus_dmamap_load(mpt->reply_dmat, mpt->reply_dmap, mpt->reply,
|
|
PAGE_SIZE, mpt_map_rquest, &im, 0);
|
|
|
|
if (im.error) {
|
|
device_printf(dev,
|
|
"error %d loading dma map for DMA reply queue\n", im.error);
|
|
return (1);
|
|
}
|
|
mpt->reply_phys = im.phys;
|
|
|
|
/* Create a child tag for data buffers */
|
|
if (bus_dma_tag_create(mpt->parent_dmat, PAGE_SIZE,
|
|
0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
|
|
NULL, NULL, MAXBSIZE, MPT_SGL_MAX, BUS_SPACE_MAXSIZE_32BIT, 0,
|
|
&mpt->buffer_dmat) != 0) {
|
|
device_printf(dev,
|
|
"cannot create a dma tag for data buffers\n");
|
|
return (1);
|
|
}
|
|
|
|
/* Create a child tag for request buffers */
|
|
if (bus_dma_tag_create(mpt->parent_dmat, PAGE_SIZE,
|
|
0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
|
|
NULL, NULL, MPT_REQ_MEM_SIZE, 1, BUS_SPACE_MAXSIZE_32BIT, 0,
|
|
&mpt->request_dmat) != 0) {
|
|
device_printf(dev, "cannot create a dma tag for requests\n");
|
|
return (1);
|
|
}
|
|
|
|
/* Allocate some DMA accessable memory for requests */
|
|
if (bus_dmamem_alloc(mpt->request_dmat, (void **)&mpt->request,
|
|
BUS_DMA_NOWAIT, &mpt->request_dmap) != 0) {
|
|
device_printf(dev,
|
|
"cannot allocate %d bytes of request memory\n",
|
|
MPT_REQ_MEM_SIZE);
|
|
return (1);
|
|
}
|
|
|
|
im.mpt = mpt;
|
|
im.error = 0;
|
|
|
|
/* Load and lock it into "bus space" */
|
|
bus_dmamap_load(mpt->request_dmat, mpt->request_dmap, mpt->request,
|
|
MPT_REQ_MEM_SIZE, mpt_map_rquest, &im, 0);
|
|
|
|
if (im.error) {
|
|
device_printf(dev,
|
|
"error %d loading dma map for DMA request queue\n",
|
|
im.error);
|
|
return (1);
|
|
}
|
|
mpt->request_phys = im.phys;
|
|
|
|
i = 0;
|
|
pptr = mpt->request_phys;
|
|
vptr = mpt->request;
|
|
end = pptr + MPT_REQ_MEM_SIZE;
|
|
while(pptr < end) {
|
|
request_t *req = &mpt->requests[i];
|
|
req->index = i++;
|
|
|
|
/* Store location of Request Data */
|
|
req->req_pbuf = pptr;
|
|
req->req_vbuf = vptr;
|
|
|
|
pptr += MPT_REQUEST_AREA;
|
|
vptr += MPT_REQUEST_AREA;
|
|
|
|
req->sense_pbuf = (pptr - MPT_SENSE_SIZE);
|
|
req->sense_vbuf = (vptr - MPT_SENSE_SIZE);
|
|
|
|
error = bus_dmamap_create(mpt->buffer_dmat, 0, &req->dmap);
|
|
if (error) {
|
|
device_printf(dev,
|
|
"error %d creating per-cmd DMA maps\n", error);
|
|
return (1);
|
|
}
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
|
|
|
|
/* Deallocate memory that was allocated by mpt_dma_mem_alloc
|
|
*/
|
|
static void
|
|
mpt_dma_mem_free(struct mpt_softc *mpt)
|
|
{
|
|
int i;
|
|
|
|
/* Make sure we aren't double destroying */
|
|
if (mpt->reply_dmat == 0) {
|
|
if (mpt->verbose)
|
|
device_printf(mpt->dev,"Already released dma memory\n");
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < MPT_MAX_REQUESTS; i++) {
|
|
bus_dmamap_destroy(mpt->buffer_dmat, mpt->requests[i].dmap);
|
|
}
|
|
bus_dmamap_unload(mpt->request_dmat, mpt->request_dmap);
|
|
bus_dmamem_free(mpt->request_dmat, mpt->request, mpt->request_dmap);
|
|
bus_dma_tag_destroy(mpt->request_dmat);
|
|
bus_dma_tag_destroy(mpt->buffer_dmat);
|
|
bus_dmamap_unload(mpt->reply_dmat, mpt->reply_dmap);
|
|
bus_dmamem_free(mpt->reply_dmat, mpt->reply, mpt->reply_dmap);
|
|
bus_dma_tag_destroy(mpt->reply_dmat);
|
|
bus_dma_tag_destroy(mpt->parent_dmat);
|
|
mpt->reply_dmat = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Reads modifiable (via PCI transactions) config registers */
|
|
static void
|
|
mpt_read_config_regs(struct mpt_softc *mpt)
|
|
{
|
|
mpt->pci_cfg.Command = pci_read_config(mpt->dev, PCIR_COMMAND, 2);
|
|
mpt->pci_cfg.LatencyTimer_LineSize =
|
|
pci_read_config(mpt->dev, PCIR_CACHELNSZ, 2);
|
|
mpt->pci_cfg.IO_BAR = pci_read_config(mpt->dev, PCIR_MAPS, 4);
|
|
mpt->pci_cfg.Mem0_BAR[0] = pci_read_config(mpt->dev, PCIR_MAPS+0x4, 4);
|
|
mpt->pci_cfg.Mem0_BAR[1] = pci_read_config(mpt->dev, PCIR_MAPS+0x8, 4);
|
|
mpt->pci_cfg.Mem1_BAR[0] = pci_read_config(mpt->dev, PCIR_MAPS+0xC, 4);
|
|
mpt->pci_cfg.Mem1_BAR[1] = pci_read_config(mpt->dev, PCIR_MAPS+0x10, 4);
|
|
mpt->pci_cfg.ROM_BAR = pci_read_config(mpt->dev, PCIR_BIOS, 4);
|
|
mpt->pci_cfg.IntLine = pci_read_config(mpt->dev, PCIR_INTLINE, 1);
|
|
mpt->pci_cfg.PMCSR = pci_read_config(mpt->dev, 0x44, 4);
|
|
}
|
|
|
|
/* Sets modifiable config registers */
|
|
void
|
|
mpt_set_config_regs(struct mpt_softc *mpt)
|
|
{
|
|
u_int32_t val;
|
|
|
|
#define MPT_CHECK(reg, offset, size) \
|
|
val = pci_read_config(mpt->dev, offset, size); \
|
|
if (mpt->pci_cfg.reg != val) { \
|
|
device_printf(mpt->dev, \
|
|
"Restoring " #reg " to 0x%X from 0x%X\n", \
|
|
mpt->pci_cfg.reg, val); \
|
|
}
|
|
|
|
if (mpt->verbose) {
|
|
MPT_CHECK(Command, PCIR_COMMAND, 2);
|
|
MPT_CHECK(LatencyTimer_LineSize, PCIR_CACHELNSZ, 2);
|
|
MPT_CHECK(IO_BAR, PCIR_MAPS, 4);
|
|
MPT_CHECK(Mem0_BAR[0], PCIR_MAPS+0x4, 4);
|
|
MPT_CHECK(Mem0_BAR[1], PCIR_MAPS+0x8, 4);
|
|
MPT_CHECK(Mem1_BAR[0], PCIR_MAPS+0xC, 4);
|
|
MPT_CHECK(Mem1_BAR[1], PCIR_MAPS+0x10, 4);
|
|
MPT_CHECK(ROM_BAR, PCIR_BIOS, 4);
|
|
MPT_CHECK(IntLine, PCIR_INTLINE, 1);
|
|
MPT_CHECK(PMCSR, 0x44, 4);
|
|
}
|
|
#undef MPT_CHECK
|
|
|
|
pci_write_config(mpt->dev, PCIR_COMMAND, mpt->pci_cfg.Command, 2);
|
|
pci_write_config(mpt->dev, PCIR_CACHELNSZ,
|
|
mpt->pci_cfg.LatencyTimer_LineSize, 2);
|
|
pci_write_config(mpt->dev, PCIR_MAPS, mpt->pci_cfg.IO_BAR, 4);
|
|
pci_write_config(mpt->dev, PCIR_MAPS+0x4, mpt->pci_cfg.Mem0_BAR[0], 4);
|
|
pci_write_config(mpt->dev, PCIR_MAPS+0x8, mpt->pci_cfg.Mem0_BAR[1], 4);
|
|
pci_write_config(mpt->dev, PCIR_MAPS+0xC, mpt->pci_cfg.Mem1_BAR[0], 4);
|
|
pci_write_config(mpt->dev, PCIR_MAPS+0x10, mpt->pci_cfg.Mem1_BAR[1], 4);
|
|
pci_write_config(mpt->dev, PCIR_BIOS, mpt->pci_cfg.ROM_BAR, 4);
|
|
pci_write_config(mpt->dev, PCIR_INTLINE, mpt->pci_cfg.IntLine, 1);
|
|
pci_write_config(mpt->dev, 0x44, mpt->pci_cfg.PMCSR, 4);
|
|
}
|