freebsd-nq/sys/dev/usb/controller/uhci.h
Andrew Thompson ab42e8b2df MFp4 //depot/projects/usb @159430
- Move tunable defines into usb_core.h and dependancy towards usb_defs.h
- Leave hardcoded defines in "usb_defs.h".
- Allow overriding all tunable defines.
- Add more customisable typedefs.
- Correct maximum device number.

Submitted by:	Hans Petter Selasky
2009-03-20 19:04:31 +00:00

322 lines
10 KiB
C

/* $FreeBSD$ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (lennart@augustsson.net) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _UHCI_H_
#define _UHCI_H_
#define UHCI_MAX_DEVICES MIN(USB_MAX_DEVICES, 128)
/* PCI config registers */
#define PCI_USBREV 0x60 /* USB protocol revision */
#define PCI_USB_REV_MASK 0xff
#define PCI_USB_REV_PRE_1_0 0x00
#define PCI_USB_REV_1_0 0x10
#define PCI_USB_REV_1_1 0x11
#define PCI_LEGSUP 0xc0 /* Legacy Support register */
#define PCI_LEGSUP_USBPIRQDEN 0x2000 /* USB PIRQ D Enable */
#define PCI_CBIO 0x20 /* configuration base IO */
#define PCI_INTERFACE_UHCI 0x00
/* UHCI registers */
#define UHCI_CMD 0x00
#define UHCI_CMD_RS 0x0001
#define UHCI_CMD_HCRESET 0x0002
#define UHCI_CMD_GRESET 0x0004
#define UHCI_CMD_EGSM 0x0008
#define UHCI_CMD_FGR 0x0010
#define UHCI_CMD_SWDBG 0x0020
#define UHCI_CMD_CF 0x0040
#define UHCI_CMD_MAXP 0x0080
#define UHCI_STS 0x02
#define UHCI_STS_USBINT 0x0001
#define UHCI_STS_USBEI 0x0002
#define UHCI_STS_RD 0x0004
#define UHCI_STS_HSE 0x0008
#define UHCI_STS_HCPE 0x0010
#define UHCI_STS_HCH 0x0020
#define UHCI_STS_ALLINTRS 0x003f
#define UHCI_INTR 0x04
#define UHCI_INTR_TOCRCIE 0x0001
#define UHCI_INTR_RIE 0x0002
#define UHCI_INTR_IOCE 0x0004
#define UHCI_INTR_SPIE 0x0008
#define UHCI_FRNUM 0x06
#define UHCI_FRNUM_MASK 0x03ff
#define UHCI_FLBASEADDR 0x08
#define UHCI_SOF 0x0c
#define UHCI_SOF_MASK 0x7f
#define UHCI_PORTSC1 0x010
#define UHCI_PORTSC2 0x012
#define UHCI_PORTSC_CCS 0x0001
#define UHCI_PORTSC_CSC 0x0002
#define UHCI_PORTSC_PE 0x0004
#define UHCI_PORTSC_POEDC 0x0008
#define UHCI_PORTSC_LS 0x0030
#define UHCI_PORTSC_LS_SHIFT 4
#define UHCI_PORTSC_RD 0x0040
#define UHCI_PORTSC_LSDA 0x0100
#define UHCI_PORTSC_PR 0x0200
#define UHCI_PORTSC_OCI 0x0400
#define UHCI_PORTSC_OCIC 0x0800
#define UHCI_PORTSC_SUSP 0x1000
#define URWMASK(x) ((x) & (UHCI_PORTSC_SUSP | \
UHCI_PORTSC_PR | UHCI_PORTSC_RD | \
UHCI_PORTSC_PE))
#define UHCI_FRAMELIST_COUNT 1024 /* units */
#define UHCI_FRAMELIST_ALIGN 4096 /* bytes */
/* Structures alignment (bytes) */
#define UHCI_TD_ALIGN 16
#define UHCI_QH_ALIGN 16
#if ((USB_PAGE_SIZE < UHCI_TD_ALIGN) || (UHCI_TD_ALIGN == 0) || \
(USB_PAGE_SIZE < UHCI_QH_ALIGN) || (UHCI_QH_ALIGN == 0))
#error "Invalid USB page size!"
#endif
typedef uint32_t uhci_physaddr_t;
#define UHCI_PTR_T 0x00000001
#define UHCI_PTR_TD 0x00000000
#define UHCI_PTR_QH 0x00000002
#define UHCI_PTR_VF 0x00000004
#define UHCI_QH_REMOVE_DELAY 5 /* us - QH remove delay */
/*
* The Queue Heads (QH) and Transfer Descriptors (TD) are accessed by
* both the CPU and the USB-controller which run concurrently. Great
* care must be taken. When the data-structures are linked into the
* USB controller's frame list, the USB-controller "owns" the
* td_status and qh_elink fields, which will not be written by the
* CPU.
*
*/
struct uhci_td {
/*
* Data used by the UHCI controller.
* volatile is used in order to mantain struct members ordering.
*/
volatile uint32_t td_next;
volatile uint32_t td_status;
#define UHCI_TD_GET_ACTLEN(s) (((s) + 1) & 0x3ff)
#define UHCI_TD_ZERO_ACTLEN(t) ((t) | 0x3ff)
#define UHCI_TD_BITSTUFF 0x00020000
#define UHCI_TD_CRCTO 0x00040000
#define UHCI_TD_NAK 0x00080000
#define UHCI_TD_BABBLE 0x00100000
#define UHCI_TD_DBUFFER 0x00200000
#define UHCI_TD_STALLED 0x00400000
#define UHCI_TD_ACTIVE 0x00800000
#define UHCI_TD_IOC 0x01000000
#define UHCI_TD_IOS 0x02000000
#define UHCI_TD_LS 0x04000000
#define UHCI_TD_GET_ERRCNT(s) (((s) >> 27) & 3)
#define UHCI_TD_SET_ERRCNT(n) ((n) << 27)
#define UHCI_TD_SPD 0x20000000
volatile uint32_t td_token;
#define UHCI_TD_PID 0x000000ff
#define UHCI_TD_PID_IN 0x00000069
#define UHCI_TD_PID_OUT 0x000000e1
#define UHCI_TD_PID_SETUP 0x0000002d
#define UHCI_TD_GET_PID(s) ((s) & 0xff)
#define UHCI_TD_SET_DEVADDR(a) ((a) << 8)
#define UHCI_TD_GET_DEVADDR(s) (((s) >> 8) & 0x7f)
#define UHCI_TD_SET_ENDPT(e) (((e) & 0xf) << 15)
#define UHCI_TD_GET_ENDPT(s) (((s) >> 15) & 0xf)
#define UHCI_TD_SET_DT(t) ((t) << 19)
#define UHCI_TD_GET_DT(s) (((s) >> 19) & 1)
#define UHCI_TD_SET_MAXLEN(l) (((l)-1) << 21)
#define UHCI_TD_GET_MAXLEN(s) ((((s) >> 21) + 1) & 0x7ff)
#define UHCI_TD_MAXLEN_MASK 0xffe00000
volatile uint32_t td_buffer;
/*
* Extra information needed:
*/
struct uhci_td *next;
struct uhci_td *prev;
struct uhci_td *obj_next;
struct usb2_page_cache *page_cache;
struct usb2_page_cache *fix_pc;
uint32_t td_self;
uint16_t len;
} __aligned(UHCI_TD_ALIGN);
typedef struct uhci_td uhci_td_t;
#define UHCI_TD_ERROR (UHCI_TD_BITSTUFF | UHCI_TD_CRCTO | \
UHCI_TD_BABBLE | UHCI_TD_DBUFFER | UHCI_TD_STALLED)
#define UHCI_TD_SETUP(len, endp, dev) (UHCI_TD_SET_MAXLEN(len) | \
UHCI_TD_SET_ENDPT(endp) | \
UHCI_TD_SET_DEVADDR(dev) | \
UHCI_TD_PID_SETUP)
#define UHCI_TD_OUT(len, endp, dev, dt) (UHCI_TD_SET_MAXLEN(len) | \
UHCI_TD_SET_ENDPT(endp) | \
UHCI_TD_SET_DEVADDR(dev) | \
UHCI_TD_PID_OUT | UHCI_TD_SET_DT(dt))
#define UHCI_TD_IN(len, endp, dev, dt) (UHCI_TD_SET_MAXLEN(len) | \
UHCI_TD_SET_ENDPT(endp) | \
UHCI_TD_SET_DEVADDR(dev) | \
UHCI_TD_PID_IN | UHCI_TD_SET_DT(dt))
struct uhci_qh {
/*
* Data used by the UHCI controller.
*/
volatile uint32_t qh_h_next;
volatile uint32_t qh_e_next;
/*
* Extra information needed:
*/
struct uhci_qh *h_next;
struct uhci_qh *h_prev;
struct uhci_qh *obj_next;
struct uhci_td *e_next;
struct usb2_page_cache *page_cache;
uint32_t qh_self;
uint16_t intr_pos;
} __aligned(UHCI_QH_ALIGN);
typedef struct uhci_qh uhci_qh_t;
/* Maximum number of isochronous TD's and QH's interrupt */
#define UHCI_VFRAMELIST_COUNT 128
#define UHCI_IFRAMELIST_COUNT (2 * UHCI_VFRAMELIST_COUNT)
#if (((UHCI_VFRAMELIST_COUNT & (UHCI_VFRAMELIST_COUNT-1)) != 0) || \
(UHCI_VFRAMELIST_COUNT > UHCI_FRAMELIST_COUNT))
#error "UHCI_VFRAMELIST_COUNT is not power of two"
#error "or UHCI_VFRAMELIST_COUNT > UHCI_FRAMELIST_COUNT"
#endif
#if (UHCI_VFRAMELIST_COUNT < USB_MAX_FS_ISOC_FRAMES_PER_XFER)
#error "maximum number of full-speed isochronous frames is higher than supported!"
#endif
struct uhci_config_desc {
struct usb2_config_descriptor confd;
struct usb2_interface_descriptor ifcd;
struct usb2_endpoint_descriptor endpd;
} __packed;
union uhci_hub_desc {
struct usb2_status stat;
struct usb2_port_status ps;
struct usb2_device_descriptor devd;
uint8_t temp[128];
};
struct uhci_hw_softc {
struct usb2_page_cache pframes_pc;
struct usb2_page_cache isoc_start_pc[UHCI_VFRAMELIST_COUNT];
struct usb2_page_cache intr_start_pc[UHCI_IFRAMELIST_COUNT];
struct usb2_page_cache ls_ctl_start_pc;
struct usb2_page_cache fs_ctl_start_pc;
struct usb2_page_cache bulk_start_pc;
struct usb2_page_cache last_qh_pc;
struct usb2_page_cache last_td_pc;
struct usb2_page pframes_pg;
struct usb2_page isoc_start_pg[UHCI_VFRAMELIST_COUNT];
struct usb2_page intr_start_pg[UHCI_IFRAMELIST_COUNT];
struct usb2_page ls_ctl_start_pg;
struct usb2_page fs_ctl_start_pg;
struct usb2_page bulk_start_pg;
struct usb2_page last_qh_pg;
struct usb2_page last_td_pg;
};
typedef struct uhci_softc {
struct uhci_hw_softc sc_hw;
struct usb2_bus sc_bus; /* base device */
union uhci_hub_desc sc_hub_desc;
struct usb2_sw_transfer sc_root_ctrl;
struct usb2_sw_transfer sc_root_intr;
struct usb2_device *sc_devices[UHCI_MAX_DEVICES];
struct uhci_td *sc_isoc_p_last[UHCI_VFRAMELIST_COUNT]; /* pointer to last TD
* for isochronous */
struct uhci_qh *sc_intr_p_last[UHCI_IFRAMELIST_COUNT]; /* pointer to last QH
* for interrupt */
struct uhci_qh *sc_ls_ctl_p_last; /* pointer to last QH for low
* speed control */
struct uhci_qh *sc_fs_ctl_p_last; /* pointer to last QH for full
* speed control */
struct uhci_qh *sc_bulk_p_last; /* pointer to last QH for bulk */
struct uhci_qh *sc_reclaim_qh_p;
struct uhci_qh *sc_last_qh_p;
struct uhci_td *sc_last_td_p;
struct resource *sc_io_res;
struct resource *sc_irq_res;
void *sc_intr_hdl;
device_t sc_dev;
bus_size_t sc_io_size;
bus_space_tag_t sc_io_tag;
bus_space_handle_t sc_io_hdl;
uint32_t sc_loops; /* number of QHs that wants looping */
uint16_t sc_intr_stat[UHCI_IFRAMELIST_COUNT];
uint16_t sc_saved_frnum;
uint8_t sc_addr; /* device address */
uint8_t sc_conf; /* device configuration */
uint8_t sc_isreset; /* bits set if a root hub is reset */
uint8_t sc_isresumed; /* bits set if a port was resumed */
uint8_t sc_saved_sof;
uint8_t sc_hub_idata[1];
char sc_vendor[16]; /* vendor string for root hub */
} uhci_softc_t;
usb2_bus_mem_cb_t uhci_iterate_hw_softc;
usb2_error_t uhci_init(uhci_softc_t *sc);
void uhci_suspend(uhci_softc_t *sc);
void uhci_resume(uhci_softc_t *sc);
void uhci_reset(uhci_softc_t *sc);
void uhci_interrupt(uhci_softc_t *sc);
#endif /* _UHCI_H_ */