freebsd-nq/sys/dev/gpio/gpiopps.c
Mark Johnston 519b64e27f Revert "Define PNP info after defining driver modules"
This reverts commit aa37baf3d7.

The reverted commit was motivated by a problem observed on stable/12,
but it turns out that a better solution was committed in r348309 but not
MFCed.  So, revert this change since it is unnecessary and not really
correct: it assumes that the order in which module metadata records is
defined determines their order in the output linker set.  While this
seems to hold in my testing, it is not guaranteed.

Reported by:	cem
Discussed with:	imp
MFC after:	3 days
2021-01-23 10:59:41 -05:00

296 lines
8.0 KiB
C

/*-
* Copyright (c) 2016 Ian Lepore <ian@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/gpio.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/timepps.h>
#include <dev/gpio/gpiobusvar.h>
#include "opt_platform.h"
#ifdef FDT
#include <dev/ofw/ofw_bus.h>
static struct ofw_compat_data compat_data[] = {
{"pps-gpio", 1},
{NULL, 0}
};
SIMPLEBUS_PNP_INFO(compat_data);
#endif /* FDT */
static devclass_t pps_devclass;
struct pps_softc {
device_t dev;
gpio_pin_t gpin;
void *ihandler;
struct resource *ires;
int irid;
struct cdev *pps_cdev;
struct pps_state pps_state;
struct mtx pps_mtx;
bool falling_edge;
};
#define PPS_CDEV_NAME "gpiopps"
static int
gpiopps_open(struct cdev *dev, int flags, int fmt, struct thread *td)
{
struct pps_softc *sc = dev->si_drv1;
/* We can't be unloaded while open, so mark ourselves BUSY. */
mtx_lock(&sc->pps_mtx);
if (device_get_state(sc->dev) < DS_BUSY) {
device_busy(sc->dev);
}
mtx_unlock(&sc->pps_mtx);
return 0;
}
static int
gpiopps_close(struct cdev *dev, int flags, int fmt, struct thread *td)
{
struct pps_softc *sc = dev->si_drv1;
/*
* Un-busy on last close. We rely on the vfs counting stuff to only call
* this routine on last-close, so we don't need any open-count logic.
*/
mtx_lock(&sc->pps_mtx);
device_unbusy(sc->dev);
mtx_unlock(&sc->pps_mtx);
return 0;
}
static int
gpiopps_ioctl(struct cdev *dev, u_long cmd, caddr_t data, int flags, struct thread *td)
{
struct pps_softc *sc = dev->si_drv1;
int err;
/* Let the kernel do the heavy lifting for ioctl. */
mtx_lock(&sc->pps_mtx);
err = pps_ioctl(cmd, data, &sc->pps_state);
mtx_unlock(&sc->pps_mtx);
return err;
}
static struct cdevsw pps_cdevsw = {
.d_version = D_VERSION,
.d_open = gpiopps_open,
.d_close = gpiopps_close,
.d_ioctl = gpiopps_ioctl,
.d_name = PPS_CDEV_NAME,
};
static int
gpiopps_ifltr(void *arg)
{
struct pps_softc *sc = arg;
/*
* There is no locking here by design... The kernel cleverly captures
* the current time into an area of the pps_state structure which is
* written only by the pps_capture() routine and read only by the
* pps_event() routine. We don't need lock-based management of access
* to the capture area because we have time-based access management: we
* can't be reading and writing concurently because we can't be running
* both the threaded and filter handlers concurrently (because a new
* hardware interrupt can't happen until the threaded handler for the
* current interrupt exits, after which the system does the EOI that
* enables a new hardware interrupt).
*/
pps_capture(&sc->pps_state);
return (FILTER_SCHEDULE_THREAD);
}
static void
gpiopps_ithrd(void *arg)
{
struct pps_softc *sc = arg;
/*
* Go create a pps event from the data captured in the filter handler.
*
* Note that we DO need locking here, unlike the case with the filter
* handler. The pps_event() routine updates the non-capture part of the
* pps_state structure, and the ioctl() code could be accessing that
* data right now in a non-interrupt context, so we need an interlock.
*/
mtx_lock(&sc->pps_mtx);
pps_event(&sc->pps_state, PPS_CAPTUREASSERT);
mtx_unlock(&sc->pps_mtx);
}
static int
gpiopps_detach(device_t dev)
{
struct pps_softc *sc = device_get_softc(dev);
if (sc->pps_cdev != NULL)
destroy_dev(sc->pps_cdev);
if (sc->ihandler != NULL)
bus_teardown_intr(dev, sc->ires, sc->ihandler);
if (sc->ires != NULL)
bus_release_resource(dev, SYS_RES_IRQ, sc->irid, sc->ires);
if (sc->gpin != NULL)
gpiobus_release_pin(GPIO_GET_BUS(sc->gpin->dev), sc->gpin->pin);
return (0);
}
#ifdef FDT
static int
gpiopps_fdt_attach(device_t dev)
{
struct pps_softc *sc;
struct make_dev_args devargs;
phandle_t node;
uint32_t edge, pincaps;
int err;
sc = device_get_softc(dev);
sc->dev = dev;
mtx_init(&sc->pps_mtx, device_get_nameunit(dev), NULL, MTX_DEF);
/* Initialize the pps_state struct. */
sc->pps_state.ppscap = PPS_CAPTUREASSERT | PPS_CAPTURECLEAR;
sc->pps_state.driver_abi = PPS_ABI_VERSION;
sc->pps_state.driver_mtx = &sc->pps_mtx;
pps_init_abi(&sc->pps_state);
/* Check which edge we're configured to capture (default is rising). */
if (ofw_bus_has_prop(dev, "assert-falling-edge"))
edge = GPIO_INTR_EDGE_FALLING;
else
edge = GPIO_INTR_EDGE_RISING;
/*
* Look up the configured gpio pin and ensure it can be configured for
* the interrupt mode we need.
*/
node = ofw_bus_get_node(dev);
if ((err = gpio_pin_get_by_ofw_idx(dev, node, 0, &sc->gpin)) != 0) {
device_printf(dev, "Cannot obtain gpio pin\n");
return (err);
}
device_printf(dev, "PPS input on %s pin %u\n",
device_get_nameunit(sc->gpin->dev), sc->gpin->pin);
if ((err = gpio_pin_getcaps(sc->gpin, &pincaps)) != 0) {
device_printf(dev, "Cannot query capabilities of gpio pin\n");
gpiopps_detach(dev);
return (err);
}
if ((pincaps & edge) == 0) {
device_printf(dev, "Pin cannot be configured for the requested signal edge\n");
gpiopps_detach(dev);
return (ENOTSUP);
}
/*
* Transform our 'gpios' property into an interrupt resource and set up
* the interrupt.
*/
if ((sc->ires = gpio_alloc_intr_resource(dev, &sc->irid, RF_ACTIVE,
sc->gpin, edge)) == NULL) {
device_printf(dev, "Cannot allocate an IRQ for the GPIO\n");
gpiopps_detach(dev);
return (err);
}
err = bus_setup_intr(dev, sc->ires, INTR_TYPE_CLK | INTR_MPSAFE,
gpiopps_ifltr, gpiopps_ithrd, sc, &sc->ihandler);
if (err != 0) {
device_printf(dev, "Unable to setup pps irq handler\n");
gpiopps_detach(dev);
return (err);
}
/* Create the RFC 2783 pps-api cdev. */
make_dev_args_init(&devargs);
devargs.mda_devsw = &pps_cdevsw;
devargs.mda_uid = UID_ROOT;
devargs.mda_gid = GID_WHEEL;
devargs.mda_mode = 0660;
devargs.mda_si_drv1 = sc;
err = make_dev_s(&devargs, &sc->pps_cdev, PPS_CDEV_NAME "%d",
device_get_unit(dev));
if (err != 0) {
device_printf(dev, "Unable to create pps cdev\n");
gpiopps_detach(dev);
return (err);
}
return (0);
}
static int
gpiopps_fdt_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (ofw_bus_search_compatible(dev, compat_data)->ocd_data != 0) {
device_set_desc(dev, "GPIO PPS");
return (BUS_PROBE_DEFAULT);
}
return (ENXIO);
}
static device_method_t pps_fdt_methods[] = {
DEVMETHOD(device_probe, gpiopps_fdt_probe),
DEVMETHOD(device_attach, gpiopps_fdt_attach),
DEVMETHOD(device_detach, gpiopps_detach),
DEVMETHOD_END
};
static driver_t pps_fdt_driver = {
"gpiopps",
pps_fdt_methods,
sizeof(struct pps_softc),
};
DRIVER_MODULE(gpiopps, simplebus, pps_fdt_driver, pps_devclass, 0, 0);
#endif /* FDT */