freebsd-nq/contrib/gcc/f/ffe.texi

@c Copyright (C) 1999 Free Software Foundation, Inc.
@c This is part of the G77 manual.
@c For copying conditions, see the file g77.texi.

@node Front End
@chapter Front End
@cindex GNU Fortran Front End (FFE)
@cindex FFE
@cindex @code{g77}, front end
@cindex front end, @code{g77}

This chapter describes some aspects of the design and implementation
of the @code{g77} front end.

To find about things that are ``To Be Determined'' or ``To Be Done'',
search for the string TBD.
If you want to help by working on one or more of these items,
email @email{gcc@@gcc.gnu.org}.
If you're planning to do more than just research issues and offer comments,
see @uref{http://gcc.gnu.org/contribute.html} for steps you might
need to take first.

@menu
* Overview of Sources::
* Overview of Translation Process::
* Philosophy of Code Generation::
* Two-pass Design::
* Challenges Posed::
* Transforming Statements::
* Transforming Expressions::
* Internal Naming Conventions::
@end menu

@node Overview of Sources
@section Overview of Sources

The current directory layout includes the following:

@table @file
@item @value{srcdir}/gcc/
Non-g77 files in gcc

@item @value{srcdir}/gcc/f/
GNU Fortran front end sources

@item @value{srcdir}/libf2c/
@code{libg2c} configuration and @code{g2c.h} file generation

@item @value{srcdir}/libf2c/libF77/
General support and math portion of @code{libg2c}

@item @value{srcdir}/libf2c/libI77/
I/O portion of @code{libg2c}

@item @value{srcdir}/libf2c/libU77/
Additional interfaces to Unix @code{libc} for @code{libg2c}
@end table

Components of note in @code{g77} are described below.

@file{f/} as a whole contains the source for @code{g77},
while @file{libf2c/} contains a portion of the separate program
@code{f2c}.
Note that the @code{libf2c} code is not part of the program @code{g77},
just distributed with it.

@file{f/} contains text files that document the Fortran compiler, source
files for the GNU Fortran Front End (FFE), and some other stuff.
The @code{g77} compiler code is placed in @file{f/} because it,
along with its contents,
is designed to be a subdirectory of a @code{gcc} source directory,
@file{gcc/},
which is structured so that language-specific front ends can be ``dropped
in'' as subdirectories.
The C++ front end (@code{g++}), is an example of this---it resides in
the @file{cp/} subdirectory.
Note that the C front end (also referred to as @code{gcc})
is an exception to this, as its source files reside
in the @file{gcc/} directory itself.

@file{libf2c/} contains the run-time libraries for the @code{f2c} program,
also used by @code{g77}.
These libraries normally referred to collectively as @code{libf2c}.
When built as part of @code{g77},
@code{libf2c} is installed under the name @code{libg2c} to avoid
conflict with any existing version of @code{libf2c},
and thus is often referred to as @code{libg2c} when the
@code{g77} version is specifically being referred to.

The @code{netlib} version of @code{libf2c/}
contains two distinct libraries,
@code{libF77} and @code{libI77},
each in their own subdirectories.
In @code{g77}, this distinction is not made,
beyond maintaining the subdirectory structure in the source-code tree.

@file{libf2c/} is not part of the program @code{g77},
just distributed with it.
It contains files not present
in the official (@code{netlib}) version of @code{libf2c},
and also contains some minor changes made from @code{libf2c},
to fix some bugs,
and to facilitate automatic configuration, building, and installation of
@code{libf2c} (as @code{libg2c}) for use by @code{g77} users.
See @file{libf2c/README} for more information,
including licensing conditions
governing distribution of programs containing code from @code{libg2c}.

@code{libg2c}, @code{g77}'s version of @code{libf2c},
adds Dave Love's implementation of @code{libU77},
in the @file{libf2c/libU77/} directory.
This library is distributed under the
GNU Library General Public License (LGPL)---see the
file @file{libf2c/libU77/COPYING.LIB}
for more information,
as this license
governs distribution conditions for programs containing code
from this portion of the library.

Files of note in @file{f/} and @file{libf2c/} are described below:

@table @file
@item f/BUGS
Lists some important bugs known to be in g77.
Or use Info (or GNU Emacs Info mode) to read
the ``Actual Bugs'' node of the @code{g77} documentation:

@smallexample
info -f f/g77.info -n "Actual Bugs"
@end smallexample

@item f/ChangeLog
Lists recent changes to @code{g77} internals.

@item libf2c/ChangeLog
Lists recent changes to @code{libg2c} internals.

@item f/NEWS
Contains the per-release changes.
These include the user-visible
changes described in the node ``Changes''
in the @code{g77} documentation, plus internal
changes of import.
Or use:

@smallexample
info -f f/g77.info -n News
@end smallexample

@item f/g77.info*
The @code{g77} documentation, in Info format,
produced by building @code{g77}.

All users of @code{g77} (not just installers) should read this,
using the @code{more} command if neither the @code{info} command,
nor GNU Emacs (with its Info mode), are available, or if users
aren't yet accustomed to using these tools.
All of these files are readable as ``plain text'' files,
though they're easier to navigate using Info readers
such as @code{info} and GNU Emacs Info mode.
@end table

If you want to explore the FFE code, which lives entirely in @file{f/},
here are a few clues.
The file @file{g77spec.c} contains the @code{g77}-specific source code
for the @code{g77} command only---this just forms a variant of the
@code{gcc} command, so,
just as the @code{gcc} command itself does not contain the C front end,
the @code{g77} command does not contain the Fortran front end (FFE).
The FFE code ends up in an executable named @file{f771},
which does the actual compiling,
so it contains the FFE plus the @code{gcc} back end (GBE),
the latter to do most of the optimization, and the code generation.

The file @file{parse.c} is the source file for @code{yyparse()},
which is invoked by the GBE to start the compilation process,
for @file{f771}.

The file @file{top.c} contains the top-level FFE function @code{ffe_file}
and it (along with top.h) define all @samp{ffe_[a-z].*}, @samp{ffe[A-Z].*},
and @samp{FFE_[A-Za-z].*} symbols.

The file @file{fini.c} is a @code{main()} program that is used when building
the FFE to generate C header and source files for recognizing keywords.
The files @file{malloc.c} and @file{malloc.h} comprise a memory manager
that defines all @samp{malloc_[a-z].*}, @samp{malloc[A-Z].*}, and
@samp{MALLOC_[A-Za-z].*} symbols.

All other modules named @var{xyz}
are comprised of all files named @samp{@var{xyz}*.@var{ext}}
and define all @samp{ffe@var{xyz}_[a-z].*}, @samp{ffe@var{xyz}[A-Z].*},
and @samp{FFE@var{XYZ}_[A-Za-z].*} symbols.
If you understand all this, congratulations---it's easier for me to remember
how it works than to type in these regular expressions.
But it does make it easy to find where a symbol is defined.
For example, the symbol @samp{ffexyz_set_something} would be defined
in @file{xyz.h} and implemented there (if it's a macro) or in @file{xyz.c}.

The ``porting'' files of note currently are:

@table @file
@item proj.c
@itemx proj.h
This defines the ``language'' used by all the other source files,
the language being Standard C plus some useful things
like @code{ARRAY_SIZE} and such.

@item target.c
@itemx target.h
These describe the target machine
in terms of what data types are supported,
how they are denoted
(to what C type does an @code{INTEGER*8} map, for example),
how to convert between them,
and so on.
Over time, versions of @code{g77} rely less on this file
and more on run-time configuration based on GBE info
in @file{com.c}.

@item com.c
@itemx com.h
These are the primary interface to the GBE.

@item ste.c
@itemx ste.h
This contains code for implementing recognized executable statements
in the GBE.

@item src.c
@itemx src.h
These contain information on the format(s) of source files
(such as whether they are never to be processed as case-insensitive
with regard to Fortran keywords).
@end table

If you want to debug the @file{f771} executable,
for example if it crashes,
note that the global variables @code{lineno} and @code{input_filename}
are usually set to reflect the current line being read by the lexer
during the first-pass analysis of a program unit and to reflect
the current line being processed during the second-pass compilation
of a program unit.

If an invocation of the function @code{ffestd_exec_end} is on the stack,
the compiler is in the second pass, otherwise it is in the first.

(This information might help you reduce a test case and/or work around
a bug in @code{g77} until a fix is available.)

@node Overview of Translation Process
@section Overview of Translation Process

The order of phases translating source code to the form accepted
by the GBE is:

@enumerate
@item
Stripping punched-card sources (@file{g77stripcard.c})

@item
Lexing (@file{lex.c})

@item
Stand-alone statement identification (@file{sta.c})

@item
INCLUDE handling (@file{sti.c})

@item
Order-dependent statement identification (@file{stq.c})

@item
Parsing (@file{stb.c} and @file{expr.c})

@item
Constructing (@file{stc.c})

@item
Collecting (@file{std.c})

@item
Expanding (@file{ste.c})
@end enumerate

To get a rough idea of how a particularly twisted Fortran statement
gets treated by the passes, consider:

@smallexample
      FORMAT(I2 4H)=(J/
     &   I3)
@end smallexample

The job of @file{lex.c} is to know enough about Fortran syntax rules
to break the statement up into distinct lexemes without requiring
any feedback from subsequent phases:

@smallexample
`FORMAT'
`('
`I24H'
`)'
`='
`('
`J'
`/'
`I3'
`)'
@end smallexample

The job of @file{sta.c} is to figure out the kind of statement,
or, at least, statement form, that sequence of lexemes represent.

The sooner it can do this (in terms of using the smallest number of
lexemes, starting with the first for each statement), the better,
because that leaves diagnostics for problems beyond the recognition
of the statement form to subsequent phases,
which can usually better describe the nature of the problem.

In this case, the @samp{=} at ``level zero''
(not nested within parentheses)
tells @file{sta.c} that this is an @emph{assignment-form},
not @code{FORMAT}, statement.

An assignment-form statement might be a statement-function
definition or an executable assignment statement.

To make that determination,
@file{sta.c} looks at the first two lexemes.

Since the second lexeme is @samp{(},
the first must represent an array for this to be an assignment statement,
else it's a statement function.

Either way, @file{sta.c} hands off the statement to @file{stq.c}
(via @file{sti.c}, which expands INCLUDE files).
@file{stq.c} figures out what a statement that is,
on its own, ambiguous, must actually be based on the context
established by previous statements.

So, @file{stq.c} watches the statement stream for executable statements,
END statements, and so on, so it knows whether @samp{A(B)=C} is
(intended as) a statement-function definition or an assignment statement.

After establishing the context-aware statement info, @file{stq.c}
passes the original sample statement on to @file{stb.c}
(either its statement-function parser or its assignment-statement parser).

@file{stb.c} forms a
statement-specific record containing the pertinent information.
That information includes a source expression and,
for an assignment statement, a destination expression.
Expressions are parsed by @file{expr.c}.

This record is passed to @file{stc.c},
which copes with the implications of the statement
within the context established by previous statements.

For example, if it's the first statement in the file
or after an @code{END} statement,
@file{stc.c} recognizes that, first of all,
a main program unit is now being lexed
(and tells that to @file{std.c}
before telling it about the current statement).

@file{stc.c} attaches whatever information it can,
usually derived from the context established by the preceding statements,
and passes the information to @file{std.c}.

@file{std.c} saves this information away,
since the GBE cannot cope with information
that might be incomplete at this stage.

For example, @samp{I3} might later be determined
to be an argument to an alternate @code{ENTRY} point.

When @file{std.c} is told about the end of an external (top-level)
program unit,
it passes all the information it has saved away
on statements in that program unit
to @file{ste.c}.

@file{ste.c} ``expands'' each statement, in sequence, by
constructing the appropriate GBE information and calling
the appropriate GBE routines.

Details on the transformational phases follow.
Keep in mind that Fortran numbering is used,
so the first character on a line is column 1,
decimal numbering is used, and so on.

@menu
* g77stripcard::
* lex.c::
* sta.c::
* sti.c::
* stq.c::
* stb.c::
* expr.c::
* stc.c::
* std.c::
* ste.c::

* Gotchas (Transforming)::
* TBD (Transforming)::
@end menu

@node g77stripcard
@subsection g77stripcard

The @code{g77stripcard} program handles removing content beyond
column 72 (adjustable via a command-line option),
optionally warning about that content being something other
than trailing whitespace or Fortran commentary.

This program is needed because @code{lex.c} doesn't pay attention
to maximum line lengths at all, to make it easier to maintain,
as well as faster (for sources that don't depend on the maximum
column length vis-a-vis trailing non-blank non-commentary content).

Just how this program will be run---whether automatically for
old source (perhaps as the default for @file{.f} files?)---is not
yet determined.

In the meantime, it might as well be implemented as a typical UNIX pipe.

It should accept a @samp{-fline-length-@var{n}} option,
with the default line length set to 72.

When the text it strips off the end of a line is not blank
(not spaces and tabs),
it should insert an additional comment line
(beginning with @samp{!},
so it works for both fixed-form and free-form files)
containing the text,
following the stripped line.
The inserted comment should have a prefix of some kind,
TBD, that distinguishes the comment as representing stripped text.
Users could use that to @code{sed} out such lines, if they wished---it
seems silly to provide a command-line option to delete information
when it can be so easily filtered out by another program.

(This inserted comment should be designed to ``fit in'' well
with whatever the Fortran community is using these days for
preprocessor, translator, and other such products, like OpenMP.
What that's all about, and how @code{g77} can elegantly fit its
special comment conventions into it all, is TBD as well.
We don't want to reinvent the wheel here, but if there turn out
to be too many conflicting conventions, we might have to invent
one that looks nothing like the others, but which offers their
host products a better infrastructure in which to fit and coexist
peacefully.)

@code{g77stripcard} probably shouldn't do any tab expansion or other
fancy stuff.
People can use @code{expand} or other pre-filtering if they like.
The idea here is to keep each stage quite simple, while providing
excellent performance for ``normal'' code.

(Code with junk beyond column 73 is not really ``normal'',
as it comes from a card-punch heritage,
and will be increasingly hard for tomorrow's Fortran programmers to read.)

@node lex.c
@subsection lex.c

To help make the lexer simple, fast, and easy to maintain,
while also having @code{g77} generally encourage Fortran programmers
to write simple, maintainable, portable code by maximizing the
performance of compiling that kind of code:

@itemize @bullet
@item
There'll be just one lexer, for both fixed-form and free-form source.

@item
It'll care about the form only when handling the first 7 columns of
text, stuff like spaces between strings of alphanumerics, and
how lines are continued.

Some other distinctions will be handled by subsequent phases,
so at least one of them will have to know which form is involved.

For example, @samp{I = 2 . 4} is acceptable in fixed form,
and works in free form as well given the implementation @code{g77}
presently uses.
But the standard requires a diagnostic for it in free form,
so the parser has to be able to recognize that
the lexemes aren't contiguous
(information the lexer @emph{does} have to provide)
and that free-form source is being parsed,
so it can provide the diagnostic.

The @code{g77} lexer doesn't try to gather @samp{2 . 4} into a single lexeme.
Otherwise, it'd have to know a whole lot more about how to parse Fortran,
or subsequent phases (mainly parsing) would have two paths through
lots of critical code---one to handle the lexeme @samp{2}, @samp{.},
and @samp{4} in sequence, another to handle the lexeme @samp{2.4}.

@item
It won't worry about line lengths
(beyond the first 7 columns for fixed-form source).

That is, once it starts parsing the ``statement'' part of a line
(column 7 for fixed-form, column 1 for free-form),
it'll keep going until it finds a newline,
rather than ignoring everything past a particular column
(72 or 132).

The implication here is that there shouldn't @emph{be}
anything past that last column, other than whitespace or
commentary, because users using typical editors
(or viewing output as typically printed)
won't necessarily know just where the last column is.

Code that has ``garbage'' beyond the last column
(almost certainly only fixed-form code with a punched-card legacy,
such as code using columns 73-80 for ``sequence numbers'')
will have to be run through @code{g77stripcard} first.

Also, keeping track of the maximum column position while also watching out
for the end of a line @emph{and} while reading from a file
just makes things slower.
Since a file must be read, and watching for the end of the line
is necessary (unless the typical input file was preprocessed to
include the necessary number of trailing spaces),
dropping the tracking of the maximum column position
is the only way to reduce the complexity of the pertinent code
while maintaining high performance.

@item
ASCII encoding is assumed for the input file.

Code written in other character sets will have to be converted first.

@item
Tabs (ASCII code 9)
will be converted to spaces via the straightforward
approach.

Specifically, a tab is converted to between one and eight spaces
as necessary to reach column @var{n},
where dividing @samp{(@var{n} - 1)} by eight
results in a remainder of zero.

That saves having to pass most source files through @code{expand}.

@item
Linefeeds (ASCII code 10)
mark the ends of lines.

@item
A carriage return (ASCII code 13)
is accept if it immediately precedes a linefeed,
in which case it is ignored.

Otherwise, it is rejected (with a diagnostic).

@item
Any other characters other than the above
that are not part of the GNU Fortran Character Set
(@pxref{Character Set})
are rejected with a diagnostic.

This includes backspaces, form feeds, and the like.

(It might make sense to allow a form feed in column 1
as long as that's the only character on a line.
It certainly wouldn't seem to cost much in terms of performance.)

@item
The end of the input stream (EOF)
ends the current line.

@item
The distinction between uppercase and lowercase letters
will be preserved.

It will be up to subsequent phases to decide to fold case.

Current plans are to permit any casing for Fortran (reserved) keywords
while preserving casing for user-defined names.
(This might not be made the default for @file{.f} files, though.)

Preserving case seems necessary to provide more direct access
to facilities outside of @code{g77}, such as to C or Pascal code.

Names of intrinsics will probably be matchable in any case,

(How @samp{external SiN; r = sin(x)} would be handled is TBD.
I think old @code{g77} might already handle that pretty elegantly,
but whether we can cope with allowing the same fragment to reference
a @emph{different} procedure, even with the same interface,
via @samp{s = SiN(r)}, needs to be determined.
If it can't, we need to make sure that when code introduces
a user-defined name, any intrinsic matching that name
using a case-insensitive comparison
is ``turned off''.)

@item
Backslashes in @code{CHARACTER} and Hollerith constants
are not allowed.

This avoids the confusion introduced by some Fortran compiler vendors
providing C-like interpretation of backslashes,
while others provide straight-through interpretation.

Some kind of lexical construct (TBD) will be provided to allow
flagging of a @code{CHARACTER}
(but probably not a Hollerith)
constant that permits backslashes.
It'll necessarily be a prefix, such as:

@smallexample
PRINT *, C'This line has a backspace \b here.'
PRINT *, F'This line has a straight backslash \ here.'
@end smallexample

Further, command-line options might be provided to specify that
one prefix or the other is to be assumed as the default
for @code{CHARACTER} constants.

However, it seems more helpful for @code{g77} to provide a program
that converts prefix all constants
(or just those containing backslashes)
with the desired designation,
so printouts of code can be read
without knowing the compile-time options used when compiling it.

If such a program is provided
(let's name it @code{g77slash} for now),
then a command-line option to @code{g77} should not be provided.
(Though, given that it'll be easy to implement, it might be hard
to resist user requests for it ``to compile faster than if we
have to invoke another filter''.)

This program would take a command-line option to specify the
default interpretation of slashes,
affecting which prefix it uses for constants.

@code{g77slash} probably should automatically convert Hollerith
constants that contain slashes
to the appropriate @code{CHARACTER} constants.
Then @code{g77} wouldn't have to define a prefix syntax for Hollerith
constants specifying whether they want C-style or straight-through
backslashes.

@item
To allow for form-neutral INCLUDE files without requiring them
to be preprocessed,
the fixed-form lexer should offer an extension (if possible)
allowing a trailing @samp{&} to be ignored, especially if after
column 72, as it would be using the traditional Unix Fortran source
model (which ignores @emph{everything} after column 72).
@end itemize

The above implements nearly exactly what is specified by
@ref{Character Set},
and
@ref{Lines},
except it also provides automatic conversion of tabs
and ignoring of newline-related carriage returns,
as well as accommodating form-neutral INCLUDE files.

It also implements the ``pure visual'' model,
by which is meant that a user viewing his code
in a typical text editor
(assuming it's not preprocessed via @code{g77stripcard} or similar)
doesn't need any special knowledge
of whether spaces on the screen are really tabs,
whether lines end immediately after the last visible non-space character
or after a number of spaces and tabs that follow it,
or whether the last line in the file is ended by a newline.

Most editors don't make these distinctions,
the ANSI FORTRAN 77 standard doesn't require them to,
and it permits a standard-conforming compiler
to define a method for transforming source code to
``standard form'' however it wants.

So, GNU Fortran defines it such that users have the best chance
of having the code be interpreted the way it looks on the screen
of the typical editor.

(Fancy editors should @emph{never} be required to correctly read code
written in classic two-dimensional-plaintext form.
By correct reading I mean ability to read it, book-like, without
mistaking text ignored by the compiler for program code and vice versa,
and without having to count beyond the first several columns.
The vague meaning of ASCII TAB, among other things, complicates
this somewhat, but as long as ``everyone'', including the editor,
other tools, and printer, agrees about the every-eighth-column convention,
the GNU Fortran ``pure visual'' model meets these requirements.
Any language or user-visible source form
requiring special tagging of tabs,
the ends of lines after spaces/tabs,
and so on, fails to meet this fairly straightforward specification.
Fortunately, Fortran @emph{itself} does not mandate such a failure,
though most vendor-supplied defaults for their Fortran compilers @emph{do}
fail to meet this specification for readability.)

Further, this model provides a clean interface
to whatever preprocessors or code-generators are used
to produce input to this phase of @code{g77}.
Mainly, they need not worry about long lines.

@node sta.c
@subsection sta.c

@node sti.c
@subsection sti.c

@node stq.c
@subsection stq.c

@node stb.c
@subsection stb.c

@node expr.c
@subsection expr.c

@node stc.c
@subsection stc.c

@node std.c
@subsection std.c

@node ste.c
@subsection ste.c

@node Gotchas (Transforming)
@subsection Gotchas (Transforming)

This section is not about transforming ``gotchas'' into something else.
It is about the weirder aspects of transforming Fortran,
however that's defined,
into a more modern, canonical form.

@subsubsection Multi-character Lexemes

Each lexeme carries with it a pointer to where it appears in the source.

To provide the ability for diagnostics to point to column numbers,
in addition to line numbers and names,
lexemes that represent more than one (significant) character
in the source code need, generally,
to provide pointers to where each @emph{character} appears in the source.

This provides the ability to properly identify the precise location
of the problem in code like

@smallexample
SUBROUTINE X
END
BLOCK DATA X
END
@end smallexample

which, in fixed-form source, would result in single lexemes
consisting of the strings @samp{SUBROUTINEX} and @samp{BLOCKDATAX}.
(The problem is that @samp{X} is defined twice,
so a pointer to the @samp{X} in the second definition,
as well as a follow-up pointer to the corresponding pointer in the first,
would be preferable to pointing to the beginnings of the statements.)

This need also arises when parsing (and diagnosing) @code{FORMAT}
statements.

Further, it arises when diagnosing
@code{FMT=} specifiers that contain constants
(or partial constants, or even propagated constants!)
in I/O statements, as in:

@smallexample
PRINT '(I2, 3HAB)', J
@end smallexample

(A pointer to the beginning of the prematurely-terminated Hollerith
constant, and/or to the close parenthese, is preferable to a pointer
to the open-parenthese or the apostrophe that precedes it.)

Multi-character lexemes, which would seem to naturally include
at least digit strings, alphanumeric strings, @code{CHARACTER}
constants, and Hollerith constants, therefore need to provide
location information on each character.
(Maybe Hollerith constants don't, but it's unnecessary to except them.)

The question then arises, what about @emph{other} multi-character lexemes,
such as @samp{**} and @samp{//},
and Fortran 90's @samp{(/}, @samp{/)}, @samp{::}, and so on?

Turns out there's a need to identify the location of the second character
of these two-character lexemes.
For example, in @samp{I(/J) = K}, the slash needs to be diagnosed
as the problem, not the open parenthese.
Similarly, it is preferable to diagnose the second slash in
@samp{I = J // K} rather than the first, given the implicit typing
rules, which would result in the compiler disallowing the attempted
concatenation of two integers.
(Though, since that's more of a semantic issue,
it's not @emph{that} much preferable.)

Even sequences that could be parsed as digit strings could use location info,
for example, to diagnose the @samp{9} in the octal constant @samp{O'129'}.
(This probably will be parsed as a character string,
to be consistent with the parsing of @samp{Z'129A'}.)

To avoid the hassle of recording the location of the second character,
while also preserving the general rule that each significant character
is distinctly pointed to by the lexeme that contains it,
it's best to simply not have any fixed-size lexemes
larger than one character.

This new design is expected to make checking for two
@samp{*} lexemes in a row much easier than the old design,
so this is not much of a sacrifice.
It probably makes the lexer much easier to implement
than it makes the parser harder.

@subsubsection Space-padding Lexemes

Certain lexemes need to be padded with virtual spaces when the
end of the line (or file) is encountered.

This is necessary in fixed form, to handle lines that don't
extend to column 72, assuming that's the line length in effect.

@subsubsection Bizarre Free-form Hollerith Constants

Last I checked, the Fortran 90 standard actually required the compiler
to silently accept something like

@smallexample
FORMAT ( 1 2   Htwelve chars )
@end smallexample

as a valid @code{FORMAT} statement specifying a twelve-character
Hollerith constant.

The implication here is that, since the new lexer is a zero-feedback one,
it won't know that the special case of a @code{FORMAT} statement being parsed
requires apparently distinct lexemes @samp{1} and @samp{2} to be treated as
a single lexeme.

(This is a horrible misfeature of the Fortran 90 language.
It's one of many such misfeatures that almost make me want
to not support them, and forge ahead with designing a new
``GNU Fortran'' language that has the features,
but not the misfeatures, of Fortran 90,
and provide utility programs to do the conversion automatically.)

So, the lexer must gather distinct chunks of decimal strings into
a single lexeme in contexts where a single decimal lexeme might
start a Hollerith constant.

(Which probably means it might as well do that all the time
for all multi-character lexemes, even in free-form mode,
leaving it to subsequent phases to pull them apart as they see fit.)

Compare the treatment of this to how

@smallexample
CHARACTER * 4 5 HEY
@end smallexample

and

@smallexample
CHARACTER * 12 HEY
@end smallexample

must be treated---the former must be diagnosed, due to the separation
between lexemes, the latter must be accepted as a proper declaration.

@subsubsection Hollerith Constants

Recognizing a Hollerith constant---specifically,
that an @samp{H} or @samp{h} after a digit string begins
such a constant---requires some knowledge of context.

Hollerith constants (such as @samp{2HAB}) can appear after:

@itemize @bullet
@item
@samp{(}

@item
@samp{,}

@item
@samp{=}

@item
@samp{+}, @samp{-}, @samp{/}

@item
@samp{*}, except as noted below
@end itemize

Hollerith constants don't appear after:

@itemize @bullet
@item
@samp{CHARACTER*},
which can be treated generally as
any @samp{*} that is the second lexeme of a statement
@end itemize

@subsubsection Confusing Function Keyword

While

@smallexample
REAL FUNCTION FOO ()
@end smallexample

must be a @code{FUNCTION} statement and

@smallexample
REAL FUNCTION FOO (5)
@end smallexample

must be a type-definition statement,

@smallexample
REAL FUNCTION FOO (@var{names})
@end smallexample

where @var{names} is a comma-separated list of names,
can be one or the other.

The only way to disambiguate that statement
(short of mandating free-form source or a short maximum
length for name for external procedures)
is based on the context of the statement.

In particular, the statement is known to be within an
already-started program unit
(but not at the outer level of the @code{CONTAINS} block),
it is a type-declaration statement.

Otherwise, the statement is a @code{FUNCTION} statement,
in that it begins a function program unit
(external, or, within @code{CONTAINS}, nested).

@subsubsection Weird READ

The statement

@smallexample
READ (N)
@end smallexample

is equivalent to either

@smallexample
READ (UNIT=(N))
@end smallexample

or

@smallexample
READ (FMT=(N))
@end smallexample

depending on which would be valid in context.

Specifically, if @samp{N} is type @code{INTEGER},
@samp{READ (FMT=(N))} would not be valid,
because parentheses may not be used around @samp{N},
whereas they may around it in @samp{READ (UNIT=(N))}.

Further, if @samp{N} is type @code{CHARACTER},
the opposite is true---@samp{READ (UNIT=(N))} is not valid,
but @samp{READ (FMT=(N))} is.

Strictly speaking, if anything follows

@smallexample
READ (N)
@end smallexample

in the statement, whether the first lexeme after the close
parenthese is a comma could be used to disambiguate the two cases,
without looking at the type of @samp{N},
because the comma is required for the @samp{READ (FMT=(N))}
interpretation and disallowed for the @samp{READ (UNIT=(N))}
interpretation.

However, in practice, many Fortran compilers allow
the comma for the @samp{READ (UNIT=(N))}
interpretation anyway
(in that they generally allow a leading comma before
an I/O list in an I/O statement),
and much code takes advantage of this allowance.

(This is quite a reasonable allowance, since the
juxtaposition of a comma-separated list immediately
after an I/O control-specification list, which is also comma-separated,
without an intervening comma,
looks sufficiently ``wrong'' to programmers
that they can't resist the itch to insert the comma.
@samp{READ (I, J), K, L} simply looks cleaner than
@samp{READ (I, J) K, L}.)

So, type-based disambiguation is needed unless strict adherence
to the standard is always assumed, and we're not going to assume that.

@node TBD (Transforming)
@subsection TBD (Transforming)

Continue researching gotchas, designing the transformational process,
and implementing it.

Specific issues to resolve:

@itemize @bullet
@item
Just where should (if it was implemented) @code{USE} processing take place?

This gets into the whole issue of how @code{g77} should handle the concept
of modules.
I think GNAT already takes on this issue, but don't know more than that.
Jim Giles has written extensively on @code{comp.lang.fortran}
about his opinions on module handling, as have others.
Jim's views should be taken into account.

Actually, Richard M. Stallman (RMS) also has written up
some guidelines for implementing such things,
but I'm not sure where I read them.
Perhaps the old @email{gcc2@@cygnus.com} list.

If someone could dig references to these up and get them to me,
that would be much appreciated!
Even though modules are not on the short-term list for implementation,
it'd be helpful to know @emph{now} how to avoid making them harder to
implement them @emph{later}.

@item
Should the @code{g77} command become just a script that invokes
all the various preprocessing that might be needed,
thus making it seem slower than necessary for legacy code
that people are unwilling to convert,
or should we provide a separate script for that,
thus encouraging people to convert their code once and for all?

At least, a separate script to behave as old @code{g77} did,
perhaps named @code{g77old}, might ease the transition,
as might a corresponding one that converts source codes
named @code{g77oldnew}.

These scripts would take all the pertinent options @code{g77} used
to take and run the appropriate filters,
passing the results to @code{g77} or just making new sources out of them
(in a subdirectory, leaving the user to do the dirty deed of
moving or copying them over the old sources).

@item
Do other Fortran compilers provide a prefix syntax
to govern the treatment of backslashes in @code{CHARACTER}
(or Hollerith) constants?

Knowing what other compilers provide would help.

@item
Is it okay to drop support for the @samp{-fintrin-case-initcap},
@samp{-fmatch-case-initcap}, @samp{-fsymbol-case-initcap},
and @samp{-fcase-initcap} options?

I've asked @email{info-gnu-fortran@@gnu.org} for input on this.
Not having to support these makes it easier to write the new front end,
and might also avoid complicated its design.

The consensus to date (1999-11-17) has been to drop this support.
Can't recall anybody saying they're using it, in fact.
@end itemize

@node Philosophy of Code Generation
@section Philosophy of Code Generation

Don't poke the bear.

The @code{g77} front end generates code
via the @code{gcc} back end.

@cindex GNU Back End (GBE)
@cindex GBE
@cindex @code{gcc}, back end
@cindex back end, gcc
@cindex code generator
The @code{gcc} back end (GBE) is a large, complex
labyrinth of intricate code
written in a combination of the C language
and specialized languages internal to @code{gcc}.

While the @emph{code} that implements the GBE
is written in a combination of languages,
the GBE itself is,
to the front end for a language like Fortran,
best viewed as a @emph{compiler}
that compiles its own, unique, language.

The GBE's ``source'', then, is written in this language,
which consists primarily of
a combination of calls to GBE functions
and @dfn{tree} nodes
(which are, themselves, created
by calling GBE functions).

So, the @code{g77} generates code by, in effect,
translating the Fortran code it reads
into a form ``written'' in the ``language''
of the @code{gcc} back end.

@cindex GBEL
@cindex GNU Back End Language (GBEL)
This language will heretofore be referred to as @dfn{GBEL},
for GNU Back End Language.

GBEL is an evolving language,
not fully specified in any published form
as of this writing.
It offers many facilities,
but its ``core'' facilities
are those that corresponding most directly
to those needed to support @code{gcc}
(compiling code written in GNU C).

The @code{g77} Fortran Front End (FFE)
is designed and implemented
to navigate the currents and eddies
of ongoing GBEL and @code{gcc} development
while also delivering on the potential
of an integrated FFE
(as compared to using a converter like @code{f2c}
and feeding the output into @code{gcc}).

Goals of the FFE's code-generation strategy include:

@itemize @bullet
@item
High likelihood of generation of correct code,
or, failing that, producing a fatal diagnostic or crashing.

@item
Generation of highly optimized code,
as directed by the user
via GBE-specific (versus @code{g77}-specific) constructs,
such as command-line options.

@item
Fast overall (FFE plus GBE) compilation.

@item
Preservation of source-level debugging information.
@end itemize

The strategies historically, and currently, used by the FFE
to achieve these goals include:

@itemize @bullet
@item
Use of GBEL constructs that most faithfully encapsulate
the semantics of Fortran.

@item
Avoidance of GBEL constructs that are so rarely used,
or limited to use in specialized situations not related to Fortran,
that their reliability and performance has not yet been established
as sufficient for use by the FFE.

@item
Flexible design, to readily accommodate changes to specific
code-generation strategies, perhaps governed by command-line options.
@end itemize

@cindex Bear-poking
@cindex Poking the bear
``Don't poke the bear'' somewhat summarizes the above strategies.
The GBE is the bear.
The FFE is designed and implemented to avoid poking it
in ways that are likely to just annoy it.
The FFE usually either tackles it head-on,
or avoids treating it in ways dissimilar to how
the @code{gcc} front end treats it.

For example, the FFE uses the native array facility in the back end
instead of the lower-level pointer-arithmetic facility
used by @code{gcc} when compiling @code{f2c} output).
Theoretically, this presents more opportunities for optimization,
faster compile times,
and the production of more faithful debugging information.
These benefits were not, however, immediately realized,
mainly because @code{gcc} itself makes little or no use
of the native array facility.

Complex arithmetic is a case study of the evolution of this strategy.
When originally implemented,
the GBEL had just evolved its own native complex-arithmetic facility,
so the FFE took advantage of that.

When porting @code{g77} to 64-bit systems,
it was discovered that the GBE didn't really
implement its native complex-arithmetic facility properly.

The short-term solution was to rewrite the FFE
to instead use the lower-level facilities
that'd be used by @code{gcc}-compiled code
(assuming that code, itself, didn't use the native complex type
provided, as an extension, by @code{gcc}),
since these were known to work,
and, in any case, if shown to not work,
would likely be rapidly fixed
(since they'd likely not work for vanilla C code in similar circumstances).

However, the rewrite accommodated the original, native approach as well
by offering a command-line option to select it over the emulated approach.
This allowed users, and especially GBE maintainers, to try out
fixes to complex-arithmetic support in the GBE
while @code{g77} continued to default to compiling more code correctly,
albeit producing (typically) slower executables.

As of April 1999, it appeared that the last few bugs
in the GBE's support of its native complex-arithmetic facility
were worked out.
The FFE was changed back to default to using that native facility,
leaving emulation as an option.

Later during the release cycle
(which was called EGCS 1.2, but soon became GCC 2.95),
bugs in the native facility were found.
Reactions among various people included
``the last thing we should do is change the default back'',
``we must change the default back'',
and ``let's figure out whether we can narrow down the bugs to
few enough cases to allow the now-months-long-tested default
to remain the same''.
The latter viewpoint won that particular time.
The bugs exposed other concerns regarding ABI compliance
when the ABI specified treatment of complex data as different
from treatment of what Fortran and GNU C consider the equivalent
aggregation (structure) of real (or float) pairs.

Other Fortran constructs---arrays, character strings,
complex division, @code{COMMON} and @code{EQUIVALENCE} aggregates,
and so on---involve issues similar to those pertaining to complex arithmetic.

So, it is possible that the history
of how the FFE handled complex arithmetic
will be repeated, probably in modified form
(and hopefully over shorter timeframes),
for some of these other facilities.

@node Two-pass Design
@section Two-pass Design

The FFE does not tell the GBE anything about a program unit
until after the last statement in that unit has been parsed.
(A program unit is a Fortran concept that corresponds, in the C world,
mostly closely to functions definitions in ISO C.
That is, a program unit in Fortran is like a top-level function in C.
Nested functions, found among the extensions offered by GNU C,
correspond roughly to Fortran's statement functions.)

So, while parsing the code in a program unit,
the FFE saves up all the information
on statements, expressions, names, and so on,
until it has seen the last statement.

At that point, the FFE revisits the saved information
(in what amounts to a second @dfn{pass} over the program unit)
to perform the actual translation of the program unit into GBEL,
ultimating in the generation of assembly code for it.

Some lookahead is performed during this second pass,
so the FFE could be viewed as a ``two-plus-pass'' design.

@menu
* Two-pass Code::
* Why Two Passes::
@end menu

@node Two-pass Code
@subsection Two-pass Code

Most of the code that turns the first pass (parsing)
into a second pass for code generation
is in @file{@value{path-g77}/std.c}.

It has external functions,
called mainly by siblings in @file{@value{path-g77}/stc.c},
that record the information on statements and expressions
in the order they are seen in the source code.
These functions save that information.

It also has an external function that revisits that information,
calling the siblings in @file{@value{path-g77}/ste.c},
which handles the actual code generation
(by generating GBEL code,
that is, by calling GBE routines
to represent and specify expressions, statements, and so on).

@node Why Two Passes
@subsection Why Two Passes

The need for two passes was not immediately evident
during the design and implementation of the code in the FFE
that was to produce GBEL.
Only after a few kludges,
to handle things like incorrectly-guessed @code{ASSIGN} label nature,
had been implemented,
did enough evidence pile up to make it clear
that @file{std.c} had to be introduced to intercept,
save, then revisit as part of a second pass,
the digested contents of a program unit.

Other such missteps have occurred during the evolution of the FFE,
because of the different goals of the FFE and the GBE.

Because the GBE's original, and still primary, goal
was to directly support the GNU C language,
the GBEL, and the GBE itself,
requires more complexity
on the part of most front ends
than it requires of @code{gcc}'s.

For example,
the GBEL offers an interface that permits the @code{gcc} front end
to implement most, or all, of the language features it supports,
without the front end having to
make use of non-user-defined variables.
(It's almost certainly the case that all of K&R C,
and probably ANSI C as well,
is handled by the @code{gcc} front end
without declaring such variables.)

The FFE, on the other hand, must resort to a variety of ``tricks''
to achieve its goals.

Consider the following C code:

@smallexample
int
foo (int a, int b)
@{
  int c = 0;

  if ((c = bar (c)) == 0)
    goto done;

  quux (c << 1);

done:
  return c;
@}
@end smallexample

Note what kinds of objects are declared, or defined, before their use,
and before any actual code generation involving them
would normally take place:

@itemize @bullet
@item
Return type of function

@item
Entry point(s) of function

@item
Dummy arguments

@item
Variables

@item
Initial values for variables
@end itemize

Whereas, the following items can, and do,
suddenly appear ``out of the blue'' in C:

@itemize @bullet
@item
Label references

@item
Function references
@end itemize

Not surprisingly, the GBE faithfully permits the latter set of items
to be ``discovered'' partway through GBEL ``programs'',
just as they are permitted to in C.

Yet, the GBE has tended, at least in the past,
to be reticent to fully support similar ``late'' discovery
of items in the former set.

This makes Fortran a poor fit for the ``safe'' subset of GBEL.
Consider:

@smallexample
      FUNCTION X (A, ARRAY, ID1)
      CHARACTER*(*) A
      DOUBLE PRECISION X, Y, Z, TMP, EE, PI
      REAL ARRAY(ID1*ID2)
      COMMON ID2
      EXTERNAL FRED

      ASSIGN 100 TO J
      CALL FOO (I)
      IF (I .EQ. 0) PRINT *, A(0)
      GOTO 200

      ENTRY Y (Z)
      ASSIGN 101 TO J
200   PRINT *, A(1)
      READ *, TMP
      GOTO J
100   X = TMP * EE
      RETURN
101   Y = TMP * PI
      CALL FRED
      DATA EE, PI /2.71D0, 3.14D0/
      END
@end smallexample

Here are some observations about the above code,
which, while somewhat contrived,
conforms to the FORTRAN 77 and Fortran 90 standards:

@itemize @bullet
@item
The return type of function @samp{X} is not known
until the @samp{DOUBLE PRECISION} line has been parsed.

@item
Whether @samp{A} is a function or a variable
is not known until the @samp{PRINT *, A(0)} statement
has been parsed.

@item
The bounds of the array of argument @samp{ARRAY}
depend on a computation involving
the subsequent argument @samp{ID1}
and the blank-common member @samp{ID2}.

@item
Whether @samp{Y} and @samp{Z} are local variables,
additional function entry points,
or dummy arguments to additional entry points
is not known
until the @code{ENTRY} statement is parsed.

@item
Similarly, whether @samp{TMP} is a local variable is not known
until the @samp{READ *, TMP} statement is parsed.

@item
The initial values for @samp{EE} and @samp{PI}
are not known until after the @code{DATA} statement is parsed.

@item
Whether @samp{FRED} is a function returning type @code{REAL}
or a subroutine
(which can be thought of as returning type @code{void}
@emph{or}, to support alternate returns in a simple way,
type @code{int})
is not known
until the @samp{CALL FRED} statement is parsed.

@item
Whether @samp{100} is a @code{FORMAT} label
or the label of an executable statement
is not known
until the @samp{X =} statement is parsed.
(These two types of labels get @emph{very} different treatment,
especially when @code{ASSIGN}'ed.)

@item
That @samp{J} is a local variable is not known
until the first @code{ASSIGN} statement is parsed.
(This happens @emph{after} executable code has been seen.)
@end itemize

Very few of these ``discoveries''
can be accommodated by the GBE as it has evolved over the years.
The GBEL doesn't support several of them,
and those it might appear to support
don't always work properly,
especially in combination with other GBEL and GBE features,
as implemented in the GBE.

(Had the GBE and its GBEL originally evolved to support @code{g77},
the shoe would be on the other foot, so to speak---most, if not all,
of the above would be directly supported by the GBEL,
and a few C constructs would probably not, as they are in reality,
be supported.
Both this mythical, and today's real, GBE caters to its GBEL
by, sometimes, scrambling around, cleaning up after itself---after
discovering that assumptions it made earlier during code generation
are incorrect.
That's not a great design, since it indicates significant code
paths that might be rarely tested but used in some key production
environments.)

So, the FFE handles these discrepancies---between the order in which
it discovers facts about the code it is compiling,
and the order in which the GBEL and GBE support such discoveries---by
performing what amounts to two
passes over each program unit.

(A few ambiguities can remain at that point,
such as whether, given @samp{EXTERNAL BAZ}
and no other reference to @samp{BAZ} in the program unit,
it is a subroutine, a function, or a block-data---which, in C-speak,
governs its declared return type.
Fortunately, these distinctions are easily finessed
for the procedure, library, and object-file interfaces
supported by @code{g77}.)

@node Challenges Posed
@section Challenges Posed

Consider the following Fortran code, which uses various extensions
(including some to Fortran 90):

@smallexample
SUBROUTINE X(A)
CHARACTER*(*) A
COMPLEX CFUNC
INTEGER*2 CLOCKS(200)
INTEGER IFUNC

CALL SYSTEM_CLOCK (CLOCKS (IFUNC (CFUNC ('('//A//')'))))
@end smallexample

The above poses the following challenges to any Fortran compiler
that uses run-time interfaces, and a run-time library, roughly similar
to those used by @code{g77}:

@itemize @bullet
@item
Assuming the library routine that supports @code{SYSTEM_CLOCK}
expects to set an @code{INTEGER*4} variable via its @code{COUNT} argument,
the compiler must make available to it a temporary variable of that type.

@item
Further, after the @code{SYSTEM_CLOCK} library routine returns,
the compiler must ensure that the temporary variable it wrote
is copied into the appropriate element of the @samp{CLOCKS} array.
(This assumes the compiler doesn't just reject the code,
which it should if it is compiling under some kind of a ``strict'' option.)

@item
To determine the correct index into the @samp{CLOCKS} array,
(putting aside the fact that the index, in this particular case,
need not be computed until after
the @code{SYSTEM_CLOCK} library routine returns),
the compiler must ensure that the @code{IFUNC} function is called.

That requires evaluating its argument,
which requires, for @code{g77}
(assuming @code{-ff2c} is in force),
reserving a temporary variable of type @code{COMPLEX}
for use as a repository for the return value
being computed by @samp{CFUNC}.

@item
Before invoking @samp{CFUNC},
is argument must be evaluated,
which requires allocating, at run time,
a temporary large enough to hold the result of the concatenation,
as well as actually performing the concatenation.

@item
The large temporary needed during invocation of @code{CFUNC}
should, ideally, be deallocated
(or, at least, left to the GBE to dispose of, as it sees fit)
as soon as @code{CFUNC} returns,
which means before @code{IFUNC} is called
(as it might need a lot of dynamically allocated memory).
@end itemize

@code{g77} currently doesn't support all of the above,
but, so that it might someday, it has evolved to handle
at least some of the above requirements.

Meeting the above requirements is made more challenging
by conforming to the requirements of the GBEL/GBE combination.

@node Transforming Statements
@section Transforming Statements

Most Fortran statements are given their own block,
and, for temporary variables they might need, their own scope.
(A block is what distinguishes @samp{@{ foo (); @}}
from just @samp{foo ();} in C.
A scope is included with every such block,
providing a distinct name space for local variables.)

Label definitions for the statement precede this block,
so @samp{10 PRINT *, I} is handled more like
@samp{fl10: @{ @dots{} @}} than @samp{@{ fl10: @dots{} @}}
(where @samp{fl10} is just a notation meaning ``Fortran Label 10''
for the purposes of this document).

@menu
* Statements Needing Temporaries::
* Transforming DO WHILE::
* Transforming Iterative DO::
* Transforming Block IF::
* Transforming SELECT CASE::
@end menu

@node Statements Needing Temporaries
@subsection Statements Needing Temporaries

Any temporaries needed during, but not beyond,
execution of a Fortran statement,
are made local to the scope of that statement's block.

This allows the GBE to share storage for these temporaries
among the various statements without the FFE
having to manage that itself.

(The GBE could, of course, decide to optimize 
management of these temporaries.
For example, it could, theoretically,
schedule some of the computations involving these temporaries
to occur in parallel.
More practically, it might leave the storage for some temporaries
``live'' beyond their scopes, to reduce the number of
manipulations of the stack pointer at run time.)

Temporaries needed across distinct statement boundaries usually
are associated with Fortran blocks (such as @code{DO}/@code{END DO}).
(Also, there might be temporaries not associated with blocks at all---these
would be in the scope of the entire program unit.)

Each Fortran block @emph{should} get its own block/scope in the GBE.
This is best, because it allows temporaries to be more naturally handled.
However, it might pose problems when handling labels
(in particular, when they're the targets of @code{GOTO}s outside the Fortran
block), and generally just hassling with replicating
parts of the @code{gcc} front end
(because the FFE needs to support
an arbitrary number of nested back-end blocks
if each Fortran block gets one).

So, there might still be a need for top-level temporaries, whose
``owning'' scope is that of the containing procedure.

Also, there seems to be problems declaring new variables after
generating code (within a block) in the back end, leading to, e.g.,
@samp{label not defined before binding contour} or similar messages,
when compiling with @samp{-fstack-check} or
when compiling for certain targets.

Because of that, and because sometimes these temporaries are not
discovered until in the middle of of generating code for an expression
statement (as in the case of the optimization for @samp{X**I}),
it seems best to always
pre-scan all the expressions that'll be expanded for a block
before generating any of the code for that block.

This pre-scan then handles discovering and declaring, to the back end,
the temporaries needed for that block.

It's also important to treat distinct items in an I/O list as distinct
statements deserving their own blocks.
That's because there's a requirement
that each I/O item be fully processed before the next one,
which matters in cases like @samp{READ (*,*), I, A(I)}---the
element of @samp{A} read in the second item
@emph{must} be determined from the value
of @samp{I} read in the first item.

@node Transforming DO WHILE
@subsection Transforming DO WHILE

@samp{DO WHILE(expr)} @emph{must} be implemented
so that temporaries needed to evaluate @samp{expr}
are generated just for the test, each time.

Consider how @samp{DO WHILE (A//B .NE. 'END'); @dots{}; END DO} is transformed:

@smallexample
for (;;)
  @{
    int temp0;

    @{
      char temp1[large];

      libg77_catenate (temp1, a, b);
      temp0 = libg77_ne (temp1, 'END');
    @}

    if (! temp0)
      break;

    @dots{}
  @}
@end smallexample

In this case, it seems like a time/space tradeoff
between allocating and deallocating @samp{temp1} for each iteration
and allocating it just once for the entire loop.

However, if @samp{temp1} is allocated just once for the entire loop,
it could be the wrong size for subsequent iterations of that loop
in cases like @samp{DO WHILE (A(I:J)//B .NE. 'END')},
because the body of the loop might modify @samp{I} or @samp{J}.

So, the above implementation is used,
though a more optimal one can be used
in specific circumstances.

@node Transforming Iterative DO
@subsection Transforming Iterative DO

An iterative @code{DO} loop
(one that specifies an iteration variable)
is required by the Fortran standards
to be implemented as though an iteration count
is computed before entering the loop body,
and that iteration count used to determine
the number of times the loop body is to be performed
(assuming the loop isn't cut short via @code{GOTO} or @code{EXIT}).

The FFE handles this by allocating a temporary variable
to contain the computed number of iterations.
Since this variable must be in a scope that includes the entire loop,
a GBEL block is created for that loop,
and the variable declared as belonging to the scope of that block.

@node Transforming Block IF
@subsection Transforming Block IF

Consider:

@smallexample
SUBROUTINE X(A,B,C)
CHARACTER*(*) A, B, C
LOGICAL LFUNC

IF (LFUNC (A//B)) THEN
  CALL SUBR1
ELSE IF (LFUNC (A//C)) THEN
  CALL SUBR2
ELSE
  CALL SUBR3
END
@end smallexample

The arguments to the two calls to @samp{LFUNC}
require dynamic allocation (at run time),
but are not required during execution of the @code{CALL} statements.

So, the scopes of those temporaries must be within blocks inside
the block corresponding to the Fortran @code{IF} block.

This cannot be represented ``naturally''
in vanilla C, nor in GBEL.
The @code{if}, @code{elseif}, @code{else},
and @code{endif} constructs
provided by both languages must,
for a given @code{if} block,
share the same C/GBE block.

Therefore, any temporaries needed during evaluation of @samp{expr}
while executing @samp{ELSE IF(expr)}
must either have been predeclared
at the top of the corresponding @code{IF} block,
or declared within a new block for that @code{ELSE IF}---a block that,
since it cannot contain the @code{else} or @code{else if} itself
(due to the above requirement),
actually implements the rest of the @code{IF} block's
@code{ELSE IF} and @code{ELSE} statements
within an inner block.

The FFE takes the latter approach.

@node Transforming SELECT CASE
@subsection Transforming SELECT CASE

@code{SELECT CASE} poses a few interesting problems for code generation,
if efficiency and frugal stack management are important.

Consider @samp{SELECT CASE (I('PREFIX'//A))},
where @samp{A} is @code{CHARACTER*(*)}.
In a case like this---basically,
in any case where largish temporaries are needed
to evaluate the expression---those temporaries should
not be ``live'' during execution of any of the @code{CASE} blocks.

So, evaluation of the expression is best done within its own block,
which in turn is within the @code{SELECT CASE} block itself
(which contains the code for the CASE blocks as well,
though each within their own block).

Otherwise, we'd have the rough equivalent of this pseudo-code:

@smallexample
@{
  char temp[large];

  libg77_catenate (temp, 'prefix', a);

  switch (i (temp))
    @{
    case 0:
      @dots{}
    @}
@}
@end smallexample

And that would leave temp[large] in scope during the CASE blocks
(although a clever back end *could* see that it isn't referenced
in them, and thus free that temp before executing the blocks).

So this approach is used instead:

@smallexample
@{
  int temp0;

  @{
    char temp1[large];

    libg77_catenate (temp1, 'prefix', a);
    temp0 = i (temp1);
  @}

  switch (temp0)
    @{
    case 0:
      @dots{}
    @}
@}
@end smallexample

Note how @samp{temp1} goes out of scope before starting the switch,
thus making it easy for a back end to free it.

The problem @emph{that} solution has, however,
is with @samp{SELECT CASE('prefix'//A)}
(which is currently not supported).

Unless the GBEL is extended to support arbitrarily long character strings
in its @code{case} facility,
the FFE has to implement @code{SELECT CASE} on @code{CHARACTER}
(probably excepting @code{CHARACTER*1})
using a cascade of
@code{if}, @code{elseif}, @code{else}, and @code{endif} constructs
in GBEL.

To prevent the (potentially large) temporary,
needed to hold the selected expression itself (@samp{'prefix'//A}),
from being in scope during execution of the @code{CASE} blocks,
two approaches are available:

@itemize @bullet
@item
Pre-evaluate all the @code{CASE} tests,
producing an integer ordinal that is used,
a la @samp{temp0} in the earlier example,
as if @samp{SELECT CASE(temp0)} had been written.

Each corresponding @code{CASE} is replaced with @samp{CASE(@var{i})},
where @var{i} is the ordinal for that case,
determined while, or before,
generating the cascade of @code{if}-related constructs
to cope with @code{CHARACTER} selection.

@item
Make @samp{temp0} above just
large enough to hold the longest @code{CASE} string
that'll actually be compared against the expression
(in this case, @samp{'prefix'//A}).

Since that length must be constant
(because @code{CASE} expressions are all constant),
it won't be so large,
and, further, @samp{temp1} need not be dynamically allocated,
since normal @code{CHARACTER} assignment can be used
into the fixed-length @samp{temp0}.
@end itemize

Both of these solutions require @code{SELECT CASE} implementation
to be changed so all the corresponding @code{CASE} statements
are seen during the actual code generation for @code{SELECT CASE}.

@node Transforming Expressions
@section Transforming Expressions

The interactions between statements, expressions, and subexpressions
at program run time can be viewed as:

@smallexample
@var{action}(@var{expr})
@end smallexample

Here, @var{action} is the series of steps
performed to effect the statement,
and @var{expr} is the expression
whose value is used by @var{action}.

Expanding the above shows a typical order of events at run time:

@smallexample
Evaluate @var{expr}
Perform @var{action}, using result of evaluation of @var{expr}
Clean up after evaluating @var{expr}
@end smallexample

So, if evaluating @var{expr} requires allocating memory,
that memory can be freed before performing @var{action}
only if it is not needed to hold the result of evaluating @var{expr}.
Otherwise, it must be freed no sooner than
after @var{action} has been performed.

The above are recursive definitions,
in the sense that they apply to subexpressions of @var{expr}.

That is, evaluating @var{expr} involves
evaluating all of its subexpressions,
performing the @var{action} that computes the
result value of @var{expr},
then cleaning up after evaluating those subexpressions.

The recursive nature of this evaluation is implemented
via recursive-descent transformation of the top-level statements,
their expressions, @emph{their} subexpressions, and so on.

However, that recursive-descent transformation is,
due to the nature of the GBEL,
focused primarily on generating a @emph{single} stream of code
to be executed at run time.

Yet, from the above, it's clear that multiple streams of code
must effectively be simultaneously generated
during the recursive-descent analysis of statements.

The primary stream implements the primary @var{action} items,
while at least two other streams implement
the evaluation and clean-up items.

Requirements imposed by expressions include:

@itemize @bullet
@item
Whether the caller needs to have a temporary ready
to hold the value of the expression.

@item
Other stuff???
@end itemize

@node Internal Naming Conventions
@section Internal Naming Conventions

Names exported by FFE modules have the following (regular-expression) forms.
Note that all names beginning @code{ffe@var{mod}} or @code{FFE@var{mod}},
where @var{mod} is lowercase or uppercase alphanumerics, respectively,
are exported by the module @code{ffe@var{mod}},
with the source code doing the exporting in @file{@var{mod}.h}.
(Usually, the source code for the implementation is in @file{@var{mod}.c}.)

Identifiers that don't fit the following forms
are not considered exported,
even if they are according to the C language.
(For example, they might be made available to other modules
solely for use within expansions of exported macros,
not for use within any source code in those other modules.)

@table @code
@item ffe@var{mod}
The single typedef exported by the module.

@item FFE@var{umod}_[A-Z][A-Z0-9_]*
(Where @var{umod} is the uppercase for of @var{mod}.)

A @code{#define} or @code{enum} constant of the type @code{ffe@var{mod}}.

@item ffe@var{mod}[A-Z][A-Z][a-z0-9]*
A typedef exported by the module.

The portion of the identifier after @code{ffe@var{mod}} is
referred to as @code{ctype}, a capitalized (mixed-case) form
of @code{type}.

@item FFE@var{umod}_@var{type}[A-Z][A-Z0-9_]*[A-Z0-9]?
(Where @var{umod} is the uppercase for of @var{mod}.)

A @code{#define} or @code{enum} constant of the type
@code{ffe@var{mod}@var{type}},
where @var{type} is the lowercase form of @var{ctype}
in an exported typedef.

@item ffe@var{mod}_@var{value}
A function that does or returns something,
as described by @var{value} (see below).

@item ffe@var{mod}_@var{value}_@var{input}
A function that does or returns something based
primarily on the thing described by @var{input} (see below).
@end table

Below are names used for @var{value} and @var{input},
along with their definitions.

@table @code
@item col
A column number within a line (first column is number 1).

@item file
An encapsulation of a file's name.

@item find
Looks up an instance of some type that matches specified criteria,
and returns that, even if it has to create a new instance or
crash trying to find it (as appropriate).

@item initialize
Initializes, usually a module.  No type.

@item int
A generic integer of type @code{int}.

@item is
A generic integer that contains a true (nonzero) or false (zero) value.

@item len
A generic integer that contains the length of something.

@item line
A line number within a source file,
or a global line number.

@item lookup
Looks up an instance of some type that matches specified criteria,
and returns that, or returns nil.

@item name
A @code{text} that points to a name of something.

@item new
Makes a new instance of the indicated type.
Might return an existing one if appropriate---if so,
similar to @code{find} without crashing.

@item pt
Pointer to a particular character (line, column pairs)
in the input file (source code being compiled).

@item run
Performs some herculean task.  No type.

@item terminate
Terminates, usually a module.  No type.

@item text
A @code{char *} that points to generic text.
@end table