d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
531147aa3e
freebsd-nq/sys/dev/stge/if_stge.c
Andre Oppermann 78ba57b9e1 Move ethernet VLAN tags from mtags to its own mbuf packet header field 
m_pkthdr.ether_vlan.  The presence of the M_VLANTAG flag on the mbuf
signifies the presence and validity of its content.

Drivers that support hardware VLAN tag stripping fill in the received
VLAN tag (containing both vlan and priority information) into the
ether_vtag mbuf packet header field:

	m->m_pkthdr.ether_vtag = vlan_id;	/* ntohs()? */
	m->m_flags |= M_VLANTAG;

to mark the packet m with the specified VLAN tag.

On output the driver should check the mbuf for the M_VLANTAG flag to
see if a VLAN tag is present and valid:

	if (m->m_flags & M_VLANTAG) {
		... = m->m_pkthdr.ether_vtag;	/* htons()? */
		... pass tag to hardware ...
	}

VLAN tags are stored in host byte order.  Byte swapping may be necessary.

(Note: This driver conversion was mechanic and did not add or remove any
byte swapping in the drivers.)

Remove zone_mtag_vlan UMA zone and MTAG_VLAN definition.  No more tag
memory allocation have to be done.

Reviewed by:	thompsa, yar
Sponsored by:	TCP/IP Optimization Fundraise 2005
2006-09-17 13:33:30 +00:00

2699 lines
66 KiB
C
Raw Blame History

/* $NetBSD: if_stge.c,v 1.32 2005/12/11 12:22:49 christos Exp $ */
/*-
* Copyright (c) 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Device driver for the Sundance Tech. TC9021 10/100/1000
* Ethernet controller.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#ifdef HAVE_KERNEL_OPTION_HEADERS
#include "opt_device_polling.h"
#endif
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/endian.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/sysctl.h>
#include <sys/taskqueue.h>
#include <net/bpf.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <net/if_vlan_var.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/stge/if_stgereg.h>
#define STGE_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP)
MODULE_DEPEND(stge, pci, 1, 1, 1);
MODULE_DEPEND(stge, ether, 1, 1, 1);
MODULE_DEPEND(stge, miibus, 1, 1, 1);
/* "device miibus" required. See GENERIC if you get errors here. */
#include "miibus_if.h"
/*
* Devices supported by this driver.
*/
static struct stge_product {
uint16_t stge_vendorid;
uint16_t stge_deviceid;
const char *stge_name;
} stge_products[] = {
{ VENDOR_SUNDANCETI, DEVICEID_SUNDANCETI_ST1023,
"Sundance ST-1023 Gigabit Ethernet" },
{ VENDOR_SUNDANCETI, DEVICEID_SUNDANCETI_ST2021,
"Sundance ST-2021 Gigabit Ethernet" },
{ VENDOR_TAMARACK, DEVICEID_TAMARACK_TC9021,
"Tamarack TC9021 Gigabit Ethernet" },
{ VENDOR_TAMARACK, DEVICEID_TAMARACK_TC9021_ALT,
"Tamarack TC9021 Gigabit Ethernet" },
/*
* The Sundance sample boards use the Sundance vendor ID,
* but the Tamarack product ID.
*/
{ VENDOR_SUNDANCETI, DEVICEID_TAMARACK_TC9021,
"Sundance TC9021 Gigabit Ethernet" },
{ VENDOR_SUNDANCETI, DEVICEID_TAMARACK_TC9021_ALT,
"Sundance TC9021 Gigabit Ethernet" },
{ VENDOR_DLINK, DEVICEID_DLINK_DL4000,
"D-Link DL-4000 Gigabit Ethernet" },
{ VENDOR_ANTARES, DEVICEID_ANTARES_TC9021,
"Antares Gigabit Ethernet" }
};
static int stge_probe(device_t);
static int stge_attach(device_t);
static int stge_detach(device_t);
static void stge_shutdown(device_t);
static int stge_suspend(device_t);
static int stge_resume(device_t);
static int stge_encap(struct stge_softc *, struct mbuf **);
static void stge_start(struct ifnet *);
static void stge_start_locked(struct ifnet *);
static void stge_watchdog(struct ifnet *);
static int stge_ioctl(struct ifnet *, u_long, caddr_t);
static void stge_init(void *);
static void stge_init_locked(struct stge_softc *);
static void stge_vlan_setup(struct stge_softc *);
static void stge_stop(struct stge_softc *);
static void stge_start_tx(struct stge_softc *);
static void stge_start_rx(struct stge_softc *);
static void stge_stop_tx(struct stge_softc *);
static void stge_stop_rx(struct stge_softc *);
static void stge_reset(struct stge_softc *, uint32_t);
static int stge_eeprom_wait(struct stge_softc *);
static void stge_read_eeprom(struct stge_softc *, int, uint16_t *);
static void stge_tick(void *);
static void stge_stats_update(struct stge_softc *);
static void stge_set_filter(struct stge_softc *);
static void stge_set_multi(struct stge_softc *);
static void stge_link_task(void *, int);
static void stge_intr(void *);
static __inline int stge_tx_error(struct stge_softc *);
static void stge_txeof(struct stge_softc *);
static void stge_rxeof(struct stge_softc *);
static __inline void stge_discard_rxbuf(struct stge_softc *, int);
static int stge_newbuf(struct stge_softc *, int);
#ifndef __NO_STRICT_ALIGNMENT
static __inline struct mbuf *stge_fixup_rx(struct stge_softc *, struct mbuf *);
#endif
static void stge_mii_sync(struct stge_softc *);
static void stge_mii_send(struct stge_softc *, uint32_t, int);
static int stge_mii_readreg(struct stge_softc *, struct stge_mii_frame *);
static int stge_mii_writereg(struct stge_softc *, struct stge_mii_frame *);
static int stge_miibus_readreg(device_t, int, int);
static int stge_miibus_writereg(device_t, int, int, int);
static void stge_miibus_statchg(device_t);
static int stge_mediachange(struct ifnet *);
static void stge_mediastatus(struct ifnet *, struct ifmediareq *);
static void stge_dmamap_cb(void *, bus_dma_segment_t *, int, int);
static int stge_dma_alloc(struct stge_softc *);
static void stge_dma_free(struct stge_softc *);
static void stge_dma_wait(struct stge_softc *);
static void stge_init_tx_ring(struct stge_softc *);
static int stge_init_rx_ring(struct stge_softc *);
#ifdef DEVICE_POLLING
static void stge_poll(struct ifnet *, enum poll_cmd, int);
#endif
static int sysctl_int_range(SYSCTL_HANDLER_ARGS, int, int);
static int sysctl_hw_stge_rxint_nframe(SYSCTL_HANDLER_ARGS);
static int sysctl_hw_stge_rxint_dmawait(SYSCTL_HANDLER_ARGS);
static device_method_t stge_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, stge_probe),
DEVMETHOD(device_attach, stge_attach),
DEVMETHOD(device_detach, stge_detach),
DEVMETHOD(device_shutdown, stge_shutdown),
DEVMETHOD(device_suspend, stge_suspend),
DEVMETHOD(device_resume, stge_resume),
/* MII interface */
DEVMETHOD(miibus_readreg, stge_miibus_readreg),
DEVMETHOD(miibus_writereg, stge_miibus_writereg),
DEVMETHOD(miibus_statchg, stge_miibus_statchg),
{ 0, 0 }
};
static driver_t stge_driver = {
"stge",
stge_methods,
sizeof(struct stge_softc)
};
static devclass_t stge_devclass;
DRIVER_MODULE(stge, pci, stge_driver, stge_devclass, 0, 0);
DRIVER_MODULE(miibus, stge, miibus_driver, miibus_devclass, 0, 0);
static struct resource_spec stge_res_spec_io[] = {
{ SYS_RES_IOPORT, PCIR_BAR(0), RF_ACTIVE },
{ SYS_RES_IRQ, 0, RF_ACTIVE | RF_SHAREABLE },
{ -1, 0, 0 }
};
static struct resource_spec stge_res_spec_mem[] = {
{ SYS_RES_MEMORY, PCIR_BAR(1), RF_ACTIVE },
{ SYS_RES_IRQ, 0, RF_ACTIVE | RF_SHAREABLE },
{ -1, 0, 0 }
};
#define MII_SET(x) \
CSR_WRITE_1(sc, STGE_PhyCtrl, CSR_READ_1(sc, STGE_PhyCtrl) | (x))
#define MII_CLR(x) \
CSR_WRITE_1(sc, STGE_PhyCtrl, CSR_READ_1(sc, STGE_PhyCtrl) & ~(x))
/*
* Sync the PHYs by setting data bit and strobing the clock 32 times.
*/
static void
stge_mii_sync(struct stge_softc *sc)
{
int i;
MII_SET(PC_MgmtDir | PC_MgmtData);
for (i = 0; i < 32; i++) {
MII_SET(PC_MgmtClk);
DELAY(1);
MII_CLR(PC_MgmtClk);
DELAY(1);
}
}
/*
* Clock a series of bits through the MII.
*/
static void
stge_mii_send(struct stge_softc *sc, uint32_t bits, int cnt)
{
int i;
MII_CLR(PC_MgmtClk);
for (i = (0x1 << (cnt - 1)); i; i >>= 1) {
if (bits & i)
MII_SET(PC_MgmtData);
else
MII_CLR(PC_MgmtData);
DELAY(1);
MII_CLR(PC_MgmtClk);
DELAY(1);
MII_SET(PC_MgmtClk);
}
}
/*
* Read an PHY register through the MII.
*/
static int
stge_mii_readreg(struct stge_softc *sc, struct stge_mii_frame *frame)
{
int i, ack;
/*
* Set up frame for RX.
*/
frame->mii_stdelim = STGE_MII_STARTDELIM;
frame->mii_opcode = STGE_MII_READOP;
frame->mii_turnaround = 0;
frame->mii_data = 0;
CSR_WRITE_1(sc, STGE_PhyCtrl, 0 | sc->sc_PhyCtrl);
/*
* Turn on data xmit.
*/
MII_SET(PC_MgmtDir);
stge_mii_sync(sc);
/*
* Send command/address info.
*/
stge_mii_send(sc, frame->mii_stdelim, 2);
stge_mii_send(sc, frame->mii_opcode, 2);
stge_mii_send(sc, frame->mii_phyaddr, 5);
stge_mii_send(sc, frame->mii_regaddr, 5);
/* Turn off xmit. */
MII_CLR(PC_MgmtDir);
/* Idle bit */
MII_CLR((PC_MgmtClk | PC_MgmtData));
DELAY(1);
MII_SET(PC_MgmtClk);
DELAY(1);
/* Check for ack */
MII_CLR(PC_MgmtClk);
DELAY(1);
ack = CSR_READ_1(sc, STGE_PhyCtrl) & PC_MgmtData;
MII_SET(PC_MgmtClk);
DELAY(1);
/*
* Now try reading data bits. If the ack failed, we still
* need to clock through 16 cycles to keep the PHY(s) in sync.
*/
if (ack) {
for(i = 0; i < 16; i++) {
MII_CLR(PC_MgmtClk);
DELAY(1);
MII_SET(PC_MgmtClk);
DELAY(1);
}
goto fail;
}
for (i = 0x8000; i; i >>= 1) {
MII_CLR(PC_MgmtClk);
DELAY(1);
if (!ack) {
if (CSR_READ_1(sc, STGE_PhyCtrl) & PC_MgmtData)
frame->mii_data |= i;
DELAY(1);
}
MII_SET(PC_MgmtClk);
DELAY(1);
}
fail:
MII_CLR(PC_MgmtClk);
DELAY(1);
MII_SET(PC_MgmtClk);
DELAY(1);
if (ack)
return(1);
return(0);
}
/*
* Write to a PHY register through the MII.
*/
static int
stge_mii_writereg(struct stge_softc *sc, struct stge_mii_frame *frame)
{
/*
* Set up frame for TX.
*/
frame->mii_stdelim = STGE_MII_STARTDELIM;
frame->mii_opcode = STGE_MII_WRITEOP;
frame->mii_turnaround = STGE_MII_TURNAROUND;
/*
* Turn on data output.
*/
MII_SET(PC_MgmtDir);
stge_mii_sync(sc);
stge_mii_send(sc, frame->mii_stdelim, 2);
stge_mii_send(sc, frame->mii_opcode, 2);
stge_mii_send(sc, frame->mii_phyaddr, 5);
stge_mii_send(sc, frame->mii_regaddr, 5);
stge_mii_send(sc, frame->mii_turnaround, 2);
stge_mii_send(sc, frame->mii_data, 16);
/* Idle bit. */
MII_SET(PC_MgmtClk);
DELAY(1);
MII_CLR(PC_MgmtClk);
DELAY(1);
/*
* Turn off xmit.
*/
MII_CLR(PC_MgmtDir);
return(0);
}
/*
* sc_miibus_readreg: [mii interface function]
*
* Read a PHY register on the MII of the TC9021.
*/
static int
stge_miibus_readreg(device_t dev, int phy, int reg)
{
struct stge_softc *sc;
struct stge_mii_frame frame;
int error;
sc = device_get_softc(dev);
if (reg == STGE_PhyCtrl) {
/* XXX allow ip1000phy read STGE_PhyCtrl register. */
STGE_MII_LOCK(sc);
error = CSR_READ_1(sc, STGE_PhyCtrl);
STGE_MII_UNLOCK(sc);
return (error);
}
bzero(&frame, sizeof(frame));
frame.mii_phyaddr = phy;
frame.mii_regaddr = reg;
STGE_MII_LOCK(sc);
error = stge_mii_readreg(sc, &frame);
STGE_MII_UNLOCK(sc);
if (error != 0) {
/* Don't show errors for PHY probe request */
if (reg != 1)
device_printf(sc->sc_dev, "phy read fail\n");
return (0);
}
return (frame.mii_data);
}
/*
* stge_miibus_writereg: [mii interface function]
*
* Write a PHY register on the MII of the TC9021.
*/
static int
stge_miibus_writereg(device_t dev, int phy, int reg, int val)
{
struct stge_softc *sc;
struct stge_mii_frame frame;
int error;
sc = device_get_softc(dev);
bzero(&frame, sizeof(frame));
frame.mii_phyaddr = phy;
frame.mii_regaddr = reg;
frame.mii_data = val;
STGE_MII_LOCK(sc);
error = stge_mii_writereg(sc, &frame);
STGE_MII_UNLOCK(sc);
if (error != 0)
device_printf(sc->sc_dev, "phy write fail\n");
return (0);
}
/*
* stge_miibus_statchg: [mii interface function]
*
* Callback from MII layer when media changes.
*/
static void
stge_miibus_statchg(device_t dev)
{
struct stge_softc *sc;
struct mii_data *mii;
sc = device_get_softc(dev);
mii = device_get_softc(sc->sc_miibus);
STGE_MII_LOCK(sc);
if (IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE) {
STGE_MII_UNLOCK(sc);
return;
}
sc->sc_MACCtrl = 0;
if (((mii->mii_media_active & IFM_GMASK) & IFM_FDX) != 0)
sc->sc_MACCtrl |= MC_DuplexSelect;
if (((mii->mii_media_active & IFM_GMASK) & IFM_FLAG0) != 0)
sc->sc_MACCtrl |= MC_RxFlowControlEnable;
if (((mii->mii_media_active & IFM_GMASK) & IFM_FLAG1) != 0)
sc->sc_MACCtrl |= MC_TxFlowControlEnable;
/*
* We can't access STGE_MACCtrl register in this context due to
* the races between MII layer and driver which accesses this
* register to program MAC. In order to solve the race, we defer
* STGE_MACCtrl programming until we know we are out of MII.
*/
taskqueue_enqueue(taskqueue_swi, &sc->sc_link_task);
STGE_MII_UNLOCK(sc);
}
/*
* stge_mediastatus: [ifmedia interface function]
*
* Get the current interface media status.
*/
static void
stge_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr)
{
struct stge_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
mii = device_get_softc(sc->sc_miibus);
mii_pollstat(mii);
ifmr->ifm_status = mii->mii_media_status;
ifmr->ifm_active = mii->mii_media_active;
}
/*
* stge_mediachange: [ifmedia interface function]
*
* Set hardware to newly-selected media.
*/
static int
stge_mediachange(struct ifnet *ifp)
{
struct stge_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
mii = device_get_softc(sc->sc_miibus);
mii_mediachg(mii);
return (0);
}
static int
stge_eeprom_wait(struct stge_softc *sc)
{
int i;
for (i = 0; i < STGE_TIMEOUT; i++) {
DELAY(1000);
if ((CSR_READ_2(sc, STGE_EepromCtrl) & EC_EepromBusy) == 0)
return (0);
}
return (1);
}
/*
* stge_read_eeprom:
*
* Read data from the serial EEPROM.
*/
static void
stge_read_eeprom(struct stge_softc *sc, int offset, uint16_t *data)
{
if (stge_eeprom_wait(sc))
device_printf(sc->sc_dev, "EEPROM failed to come ready\n");
CSR_WRITE_2(sc, STGE_EepromCtrl,
EC_EepromAddress(offset) | EC_EepromOpcode(EC_OP_RR));
if (stge_eeprom_wait(sc))
device_printf(sc->sc_dev, "EEPROM read timed out\n");
*data = CSR_READ_2(sc, STGE_EepromData);
}
static int
stge_probe(device_t dev)
{
struct stge_product *sp;
int i;
uint16_t vendor, devid;
vendor = pci_get_vendor(dev);
devid = pci_get_device(dev);
sp = stge_products;
for (i = 0; i < sizeof(stge_products)/sizeof(stge_products[0]);
i++, sp++) {
if (vendor == sp->stge_vendorid &&
devid == sp->stge_deviceid) {
device_set_desc(dev, sp->stge_name);
return (BUS_PROBE_DEFAULT);
}
}
return (ENXIO);
}
static int
stge_attach(device_t dev)
{
struct stge_softc *sc;
struct ifnet *ifp;
uint8_t enaddr[ETHER_ADDR_LEN];
int error, i;
uint16_t cmd;
uint32_t val;
error = 0;
sc = device_get_softc(dev);
sc->sc_dev = dev;
mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
MTX_DEF);
mtx_init(&sc->sc_mii_mtx, "stge_mii_mutex", NULL, MTX_DEF);
callout_init_mtx(&sc->sc_tick_ch, &sc->sc_mtx, 0);
TASK_INIT(&sc->sc_link_task, 0, stge_link_task, sc);
/*
* Map the device.
*/
pci_enable_busmaster(dev);
cmd = pci_read_config(dev, PCIR_COMMAND, 2);
val = pci_read_config(dev, PCIR_BAR(1), 4);
if ((val & 0x01) != 0)
sc->sc_spec = stge_res_spec_mem;
else {
val = pci_read_config(dev, PCIR_BAR(0), 4);
if ((val & 0x01) == 0) {
device_printf(sc->sc_dev, "couldn't locate IO BAR\n");
error = ENXIO;
goto fail;
}
sc->sc_spec = stge_res_spec_io;
}
error = bus_alloc_resources(dev, sc->sc_spec, sc->sc_res);
if (error != 0) {
device_printf(dev, "couldn't allocate %s resources\n",
sc->sc_spec == stge_res_spec_mem ? "memory" : "I/O");
goto fail;
}
sc->sc_rev = pci_get_revid(dev);
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO,
"rxint_nframe", CTLTYPE_INT|CTLFLAG_RW, &sc->sc_rxint_nframe, 0,
sysctl_hw_stge_rxint_nframe, "I", "stge rx interrupt nframe");
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO,
"rxint_dmawait", CTLTYPE_INT|CTLFLAG_RW, &sc->sc_rxint_dmawait, 0,
sysctl_hw_stge_rxint_dmawait, "I", "stge rx interrupt dmawait");
/* Pull in device tunables. */
sc->sc_rxint_nframe = STGE_RXINT_NFRAME_DEFAULT;
error = resource_int_value(device_get_name(dev), device_get_unit(dev),
"rxint_nframe", &sc->sc_rxint_nframe);
if (error == 0) {
if (sc->sc_rxint_nframe < STGE_RXINT_NFRAME_MIN ||
sc->sc_rxint_nframe > STGE_RXINT_NFRAME_MAX) {
device_printf(dev, "rxint_nframe value out of range; "
"using default: %d\n", STGE_RXINT_NFRAME_DEFAULT);
sc->sc_rxint_nframe = STGE_RXINT_NFRAME_DEFAULT;
}
}
sc->sc_rxint_dmawait = STGE_RXINT_DMAWAIT_DEFAULT;
error = resource_int_value(device_get_name(dev), device_get_unit(dev),
"rxint_dmawait", &sc->sc_rxint_dmawait);
if (error == 0) {
if (sc->sc_rxint_dmawait < STGE_RXINT_DMAWAIT_MIN ||
sc->sc_rxint_dmawait > STGE_RXINT_DMAWAIT_MAX) {
device_printf(dev, "rxint_dmawait value out of range; "
"using default: %d\n", STGE_RXINT_DMAWAIT_DEFAULT);
sc->sc_rxint_dmawait = STGE_RXINT_DMAWAIT_DEFAULT;
}
}
if ((error = stge_dma_alloc(sc) != 0))
goto fail;
/*
* Determine if we're copper or fiber. It affects how we
* reset the card.
*/
if (CSR_READ_4(sc, STGE_AsicCtrl) & AC_PhyMedia)
sc->sc_usefiber = 1;
else
sc->sc_usefiber = 0;
/* Load LED configuration from EEPROM. */
stge_read_eeprom(sc, STGE_EEPROM_LEDMode, &sc->sc_led);
/*
* Reset the chip to a known state.
*/
STGE_LOCK(sc);
stge_reset(sc, STGE_RESET_FULL);
STGE_UNLOCK(sc);
/*
* Reading the station address from the EEPROM doesn't seem
* to work, at least on my sample boards. Instead, since
* the reset sequence does AutoInit, read it from the station
* address registers. For Sundance 1023 you can only read it
* from EEPROM.
*/
if (pci_get_device(dev) != DEVICEID_SUNDANCETI_ST1023) {
uint16_t v;
v = CSR_READ_2(sc, STGE_StationAddress0);
enaddr[0] = v & 0xff;
enaddr[1] = v >> 8;
v = CSR_READ_2(sc, STGE_StationAddress1);
enaddr[2] = v & 0xff;
enaddr[3] = v >> 8;
v = CSR_READ_2(sc, STGE_StationAddress2);
enaddr[4] = v & 0xff;
enaddr[5] = v >> 8;
sc->sc_stge1023 = 0;
} else {
uint16_t myaddr[ETHER_ADDR_LEN / 2];
for (i = 0; i <ETHER_ADDR_LEN / 2; i++) {
stge_read_eeprom(sc, STGE_EEPROM_StationAddress0 + i,
&myaddr[i]);
myaddr[i] = le16toh(myaddr[i]);
}
bcopy(myaddr, enaddr, sizeof(enaddr));
sc->sc_stge1023 = 1;
}
ifp = sc->sc_ifp = if_alloc(IFT_ETHER);
if (ifp == NULL) {
device_printf(sc->sc_dev, "failed to if_alloc()\n");
error = ENXIO;
goto fail;
}
ifp->if_softc = sc;
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = stge_ioctl;
ifp->if_start = stge_start;
ifp->if_watchdog = stge_watchdog;
ifp->if_init = stge_init;
ifp->if_mtu = ETHERMTU;
ifp->if_snd.ifq_drv_maxlen = STGE_TX_RING_CNT - 1;
IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen);
IFQ_SET_READY(&ifp->if_snd);
/* Revision B3 and earlier chips have checksum bug. */
if (sc->sc_rev >= 0x0c) {
ifp->if_hwassist = STGE_CSUM_FEATURES;
ifp->if_capabilities = IFCAP_HWCSUM;
} else {
ifp->if_hwassist = 0;
ifp->if_capabilities = 0;
}
ifp->if_capenable = ifp->if_capabilities;
/*
* Read some important bits from the PhyCtrl register.
*/
sc->sc_PhyCtrl = CSR_READ_1(sc, STGE_PhyCtrl) &
(PC_PhyDuplexPolarity | PC_PhyLnkPolarity);
/* Set up MII bus. */
if ((error = mii_phy_probe(sc->sc_dev, &sc->sc_miibus, stge_mediachange,
stge_mediastatus)) != 0) {
device_printf(sc->sc_dev, "no PHY found!\n");
goto fail;
}
ether_ifattach(ifp, enaddr);
/* VLAN capability setup */
ifp->if_capabilities |= IFCAP_VLAN_MTU | IFCAP_VLAN_HWTAGGING;
if (sc->sc_rev >= 0x0c)
ifp->if_capabilities |= IFCAP_VLAN_HWCSUM;
ifp->if_capenable = ifp->if_capabilities;
#ifdef DEVICE_POLLING
ifp->if_capabilities |= IFCAP_POLLING;
#endif
/*
* Tell the upper layer(s) we support long frames.
* Must appear after the call to ether_ifattach() because
* ether_ifattach() sets ifi_hdrlen to the default value.
*/
ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
/*
* The manual recommends disabling early transmit, so we
* do. It's disabled anyway, if using IP checksumming,
* since the entire packet must be in the FIFO in order
* for the chip to perform the checksum.
*/
sc->sc_txthresh = 0x0fff;
/*
* Disable MWI if the PCI layer tells us to.
*/
sc->sc_DMACtrl = 0;
if ((cmd & PCIM_CMD_MWRICEN) == 0)
sc->sc_DMACtrl |= DMAC_MWIDisable;
/*
* Hookup IRQ
*/
error = bus_setup_intr(dev, sc->sc_res[1], INTR_TYPE_NET | INTR_MPSAFE,
stge_intr, sc, &sc->sc_ih);
if (error != 0) {
ether_ifdetach(ifp);
device_printf(sc->sc_dev, "couldn't set up IRQ\n");
sc->sc_ifp = NULL;
goto fail;
}
fail:
if (error != 0)
stge_detach(dev);
return (error);
}
static int
stge_detach(device_t dev)
{
struct stge_softc *sc;
struct ifnet *ifp;
sc = device_get_softc(dev);
ifp = sc->sc_ifp;
#ifdef DEVICE_POLLING
if (ifp && ifp->if_capenable & IFCAP_POLLING)
ether_poll_deregister(ifp);
#endif
if (device_is_attached(dev)) {
STGE_LOCK(sc);
/* XXX */
sc->sc_detach = 1;
stge_stop(sc);
STGE_UNLOCK(sc);
callout_drain(&sc->sc_tick_ch);
taskqueue_drain(taskqueue_swi, &sc->sc_link_task);
ether_ifdetach(ifp);
}
if (sc->sc_miibus != NULL) {
device_delete_child(dev, sc->sc_miibus);
sc->sc_miibus = NULL;
}
bus_generic_detach(dev);
stge_dma_free(sc);
if (ifp != NULL) {
if_free(ifp);
sc->sc_ifp = NULL;
}
if (sc->sc_ih) {
bus_teardown_intr(dev, sc->sc_res[1], sc->sc_ih);
sc->sc_ih = NULL;
}
bus_release_resources(dev, sc->sc_spec, sc->sc_res);
mtx_destroy(&sc->sc_mii_mtx);
mtx_destroy(&sc->sc_mtx);
return (0);
}
struct stge_dmamap_arg {
bus_addr_t stge_busaddr;
};
static void
stge_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
struct stge_dmamap_arg *ctx;
if (error != 0)
return;
ctx = (struct stge_dmamap_arg *)arg;
ctx->stge_busaddr = segs[0].ds_addr;
}
static int
stge_dma_alloc(struct stge_softc *sc)
{
struct stge_dmamap_arg ctx;
struct stge_txdesc *txd;
struct stge_rxdesc *rxd;
int error, i;
/* create parent tag. */
error = bus_dma_tag_create(NULL, /* parent */
1, 0, /* algnmnt, boundary */
STGE_DMA_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
BUS_SPACE_MAXSIZE_32BIT, /* maxsize */
0, /* nsegments */
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->sc_cdata.stge_parent_tag);
if (error != 0) {
device_printf(sc->sc_dev, "failed to create parent DMA tag\n");
goto fail;
}
/* create tag for Tx ring. */
error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */
STGE_RING_ALIGN, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
STGE_TX_RING_SZ, /* maxsize */
1, /* nsegments */
STGE_TX_RING_SZ, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->sc_cdata.stge_tx_ring_tag);
if (error != 0) {
device_printf(sc->sc_dev,
"failed to allocate Tx ring DMA tag\n");
goto fail;
}
/* create tag for Rx ring. */
error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */
STGE_RING_ALIGN, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
STGE_RX_RING_SZ, /* maxsize */
1, /* nsegments */
STGE_RX_RING_SZ, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->sc_cdata.stge_rx_ring_tag);
if (error != 0) {
device_printf(sc->sc_dev,
"failed to allocate Rx ring DMA tag\n");
goto fail;
}
/* create tag for Tx buffers. */
error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */
1, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
MCLBYTES * STGE_MAXTXSEGS, /* maxsize */
STGE_MAXTXSEGS, /* nsegments */
MCLBYTES, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->sc_cdata.stge_tx_tag);
if (error != 0) {
device_printf(sc->sc_dev, "failed to allocate Tx DMA tag\n");
goto fail;
}
/* create tag for Rx buffers. */
error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */
1, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
MCLBYTES, /* maxsize */
1, /* nsegments */
MCLBYTES, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->sc_cdata.stge_rx_tag);
if (error != 0) {
device_printf(sc->sc_dev, "failed to allocate Rx DMA tag\n");
goto fail;
}
/* allocate DMA'able memory and load the DMA map for Tx ring. */
error = bus_dmamem_alloc(sc->sc_cdata.stge_tx_ring_tag,
(void **)&sc->sc_rdata.stge_tx_ring, BUS_DMA_NOWAIT | BUS_DMA_ZERO,
&sc->sc_cdata.stge_tx_ring_map);
if (error != 0) {
device_printf(sc->sc_dev,
"failed to allocate DMA'able memory for Tx ring\n");
goto fail;
}
ctx.stge_busaddr = 0;
error = bus_dmamap_load(sc->sc_cdata.stge_tx_ring_tag,
sc->sc_cdata.stge_tx_ring_map, sc->sc_rdata.stge_tx_ring,
STGE_TX_RING_SZ, stge_dmamap_cb, &ctx, BUS_DMA_NOWAIT);
if (error != 0 || ctx.stge_busaddr == 0) {
device_printf(sc->sc_dev,
"failed to load DMA'able memory for Tx ring\n");
goto fail;
}
sc->sc_rdata.stge_tx_ring_paddr = ctx.stge_busaddr;
/* allocate DMA'able memory and load the DMA map for Rx ring. */
error = bus_dmamem_alloc(sc->sc_cdata.stge_rx_ring_tag,
(void **)&sc->sc_rdata.stge_rx_ring, BUS_DMA_NOWAIT | BUS_DMA_ZERO,
&sc->sc_cdata.stge_rx_ring_map);
if (error != 0) {
device_printf(sc->sc_dev,
"failed to allocate DMA'able memory for Rx ring\n");
goto fail;
}
ctx.stge_busaddr = 0;
error = bus_dmamap_load(sc->sc_cdata.stge_rx_ring_tag,
sc->sc_cdata.stge_rx_ring_map, sc->sc_rdata.stge_rx_ring,
STGE_RX_RING_SZ, stge_dmamap_cb, &ctx, BUS_DMA_NOWAIT);
if (error != 0 || ctx.stge_busaddr == 0) {
device_printf(sc->sc_dev,
"failed to load DMA'able memory for Rx ring\n");
goto fail;
}
sc->sc_rdata.stge_rx_ring_paddr = ctx.stge_busaddr;
/* create DMA maps for Tx buffers. */
for (i = 0; i < STGE_TX_RING_CNT; i++) {
txd = &sc->sc_cdata.stge_txdesc[i];
txd->tx_m = NULL;
txd->tx_dmamap = 0;
error = bus_dmamap_create(sc->sc_cdata.stge_tx_tag, 0,
&txd->tx_dmamap);
if (error != 0) {
device_printf(sc->sc_dev,
"failed to create Tx dmamap\n");
goto fail;
}
}
/* create DMA maps for Rx buffers. */
if ((error = bus_dmamap_create(sc->sc_cdata.stge_rx_tag, 0,
&sc->sc_cdata.stge_rx_sparemap)) != 0) {
device_printf(sc->sc_dev, "failed to create spare Rx dmamap\n");
goto fail;
}
for (i = 0; i < STGE_RX_RING_CNT; i++) {
rxd = &sc->sc_cdata.stge_rxdesc[i];
rxd->rx_m = NULL;
rxd->rx_dmamap = 0;
error = bus_dmamap_create(sc->sc_cdata.stge_rx_tag, 0,
&rxd->rx_dmamap);
if (error != 0) {
device_printf(sc->sc_dev,
"failed to create Rx dmamap\n");
goto fail;
}
}
fail:
return (error);
}
static void
stge_dma_free(struct stge_softc *sc)
{
struct stge_txdesc *txd;
struct stge_rxdesc *rxd;
int i;
/* Tx ring */
if (sc->sc_cdata.stge_tx_ring_tag) {
if (sc->sc_cdata.stge_tx_ring_map)
bus_dmamap_unload(sc->sc_cdata.stge_tx_ring_tag,
sc->sc_cdata.stge_tx_ring_map);
if (sc->sc_cdata.stge_tx_ring_map &&
sc->sc_rdata.stge_tx_ring)
bus_dmamem_free(sc->sc_cdata.stge_tx_ring_tag,
sc->sc_rdata.stge_tx_ring,
sc->sc_cdata.stge_tx_ring_map);
sc->sc_rdata.stge_tx_ring = NULL;
sc->sc_cdata.stge_tx_ring_map = 0;
bus_dma_tag_destroy(sc->sc_cdata.stge_tx_ring_tag);
sc->sc_cdata.stge_tx_ring_tag = NULL;
}
/* Rx ring */
if (sc->sc_cdata.stge_rx_ring_tag) {
if (sc->sc_cdata.stge_rx_ring_map)
bus_dmamap_unload(sc->sc_cdata.stge_rx_ring_tag,
sc->sc_cdata.stge_rx_ring_map);
if (sc->sc_cdata.stge_rx_ring_map &&
sc->sc_rdata.stge_rx_ring)
bus_dmamem_free(sc->sc_cdata.stge_rx_ring_tag,
sc->sc_rdata.stge_rx_ring,
sc->sc_cdata.stge_rx_ring_map);
sc->sc_rdata.stge_rx_ring = NULL;
sc->sc_cdata.stge_rx_ring_map = 0;
bus_dma_tag_destroy(sc->sc_cdata.stge_rx_ring_tag);
sc->sc_cdata.stge_rx_ring_tag = NULL;
}
/* Tx buffers */
if (sc->sc_cdata.stge_tx_tag) {
for (i = 0; i < STGE_TX_RING_CNT; i++) {
txd = &sc->sc_cdata.stge_txdesc[i];
if (txd->tx_dmamap) {
bus_dmamap_destroy(sc->sc_cdata.stge_tx_tag,
txd->tx_dmamap);
txd->tx_dmamap = 0;
}
}
bus_dma_tag_destroy(sc->sc_cdata.stge_tx_tag);
sc->sc_cdata.stge_tx_tag = NULL;
}
/* Rx buffers */
if (sc->sc_cdata.stge_rx_tag) {
for (i = 0; i < STGE_RX_RING_CNT; i++) {
rxd = &sc->sc_cdata.stge_rxdesc[i];
if (rxd->rx_dmamap) {
bus_dmamap_destroy(sc->sc_cdata.stge_rx_tag,
rxd->rx_dmamap);
rxd->rx_dmamap = 0;
}
}
if (sc->sc_cdata.stge_rx_sparemap) {
bus_dmamap_destroy(sc->sc_cdata.stge_rx_tag,
sc->sc_cdata.stge_rx_sparemap);
sc->sc_cdata.stge_rx_sparemap = 0;
}
bus_dma_tag_destroy(sc->sc_cdata.stge_rx_tag);
sc->sc_cdata.stge_rx_tag = NULL;
}
if (sc->sc_cdata.stge_parent_tag) {
bus_dma_tag_destroy(sc->sc_cdata.stge_parent_tag);
sc->sc_cdata.stge_parent_tag = NULL;
}
}
/*
* stge_shutdown:
*
* Make sure the interface is stopped at reboot time.
*/
static void
stge_shutdown(device_t dev)
{
struct stge_softc *sc;
sc = device_get_softc(dev);
STGE_LOCK(sc);
stge_stop(sc);
STGE_UNLOCK(sc);
}
static int
stge_suspend(device_t dev)
{
struct stge_softc *sc;
sc = device_get_softc(dev);
STGE_LOCK(sc);
stge_stop(sc);
sc->sc_suspended = 1;
STGE_UNLOCK(sc);
return (0);
}
static int
stge_resume(device_t dev)
{
struct stge_softc *sc;
struct ifnet *ifp;
sc = device_get_softc(dev);
STGE_LOCK(sc);
ifp = sc->sc_ifp;
if (ifp->if_flags & IFF_UP)
stge_init_locked(sc);
sc->sc_suspended = 0;
STGE_UNLOCK(sc);
return (0);
}
static void
stge_dma_wait(struct stge_softc *sc)
{
int i;
for (i = 0; i < STGE_TIMEOUT; i++) {
DELAY(2);
if ((CSR_READ_4(sc, STGE_DMACtrl) & DMAC_TxDMAInProg) == 0)
break;
}
if (i == STGE_TIMEOUT)
device_printf(sc->sc_dev, "DMA wait timed out\n");
}
static int
stge_encap(struct stge_softc *sc, struct mbuf **m_head)
{
struct stge_txdesc *txd;
struct stge_tfd *tfd;
struct mbuf *m;
bus_dma_segment_t txsegs[STGE_MAXTXSEGS];
int error, i, nsegs, si;
uint64_t csum_flags, tfc;
STGE_LOCK_ASSERT(sc);
if ((txd = STAILQ_FIRST(&sc->sc_cdata.stge_txfreeq)) == NULL)
return (ENOBUFS);
error = bus_dmamap_load_mbuf_sg(sc->sc_cdata.stge_tx_tag,
txd->tx_dmamap, *m_head, txsegs, &nsegs, 0);
if (error == EFBIG) {
m = m_defrag(*m_head, M_DONTWAIT);
if (m == NULL) {
m_freem(*m_head);
*m_head = NULL;
return (ENOMEM);
}
*m_head = m;
error = bus_dmamap_load_mbuf_sg(sc->sc_cdata.stge_tx_tag,
txd->tx_dmamap, *m_head, txsegs, &nsegs, 0);
if (error != 0) {
m_freem(*m_head);
*m_head = NULL;
return (error);
}
} else if (error != 0)
return (error);
if (nsegs == 0) {
m_freem(*m_head);
*m_head = NULL;
return (EIO);
}
m = *m_head;
csum_flags = 0;
if ((m->m_pkthdr.csum_flags & STGE_CSUM_FEATURES) != 0) {
if (m->m_pkthdr.csum_flags & CSUM_IP)
csum_flags |= TFD_IPChecksumEnable;
if (m->m_pkthdr.csum_flags & CSUM_TCP)
csum_flags |= TFD_TCPChecksumEnable;
else if (m->m_pkthdr.csum_flags & CSUM_UDP)
csum_flags |= TFD_UDPChecksumEnable;
}
si = sc->sc_cdata.stge_tx_prod;
tfd = &sc->sc_rdata.stge_tx_ring[si];
for (i = 0; i < nsegs; i++)
tfd->tfd_frags[i].frag_word0 =
htole64(FRAG_ADDR(txsegs[i].ds_addr) |
FRAG_LEN(txsegs[i].ds_len));
sc->sc_cdata.stge_tx_cnt++;
tfc = TFD_FrameId(si) | TFD_WordAlign(TFD_WordAlign_disable) |
TFD_FragCount(nsegs) | csum_flags;
if (sc->sc_cdata.stge_tx_cnt >= STGE_TX_HIWAT)
tfc |= TFD_TxDMAIndicate;
/* Update producer index. */
sc->sc_cdata.stge_tx_prod = (si + 1) % STGE_TX_RING_CNT;
/* Check if we have a VLAN tag to insert. */
if (m->m_flags & M_VLANTAG)
tfc |= (TFD_VLANTagInsert | TFD_VID(m->m_pkthdr.ether_vtag));
tfd->tfd_control = htole64(tfc);
/* Update Tx Queue. */
STAILQ_REMOVE_HEAD(&sc->sc_cdata.stge_txfreeq, tx_q);
STAILQ_INSERT_TAIL(&sc->sc_cdata.stge_txbusyq, txd, tx_q);
txd->tx_m = m;
/* Sync descriptors. */
bus_dmamap_sync(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap,
BUS_DMASYNC_PREWRITE);
bus_dmamap_sync(sc->sc_cdata.stge_tx_ring_tag,
sc->sc_cdata.stge_tx_ring_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
return (0);
}
/*
* stge_start: [ifnet interface function]
*
* Start packet transmission on the interface.
*/
static void
stge_start(struct ifnet *ifp)
{
struct stge_softc *sc;
sc = ifp->if_softc;
STGE_LOCK(sc);
stge_start_locked(ifp);
STGE_UNLOCK(sc);
}
static void
stge_start_locked(struct ifnet *ifp)
{
struct stge_softc *sc;
struct mbuf *m_head;
int enq;
sc = ifp->if_softc;
STGE_LOCK_ASSERT(sc);
if ((ifp->if_drv_flags & (IFF_DRV_RUNNING|IFF_DRV_OACTIVE)) !=
IFF_DRV_RUNNING)
return;
for (enq = 0; !IFQ_DRV_IS_EMPTY(&ifp->if_snd); ) {
if (sc->sc_cdata.stge_tx_cnt >= STGE_TX_HIWAT) {
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
break;
}
IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
if (m_head == NULL)
break;
/*
* Pack the data into the transmit ring. If we
* don't have room, set the OACTIVE flag and wait
* for the NIC to drain the ring.
*/
if (stge_encap(sc, &m_head)) {
if (m_head == NULL)
break;
IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
break;
}
enq++;
/*
* If there's a BPF listener, bounce a copy of this frame
* to him.
*/
BPF_MTAP(ifp, m_head);
}
if (enq > 0) {
/* Transmit */
CSR_WRITE_4(sc, STGE_DMACtrl, DMAC_TxDMAPollNow);
/* Set a timeout in case the chip goes out to lunch. */
ifp->if_timer = 5;
}
}
/*
* stge_watchdog: [ifnet interface function]
*
* Watchdog timer handler.
*/
static void
stge_watchdog(struct ifnet *ifp)
{
struct stge_softc *sc;
sc = ifp->if_softc;
STGE_LOCK(sc);
if_printf(sc->sc_ifp, "device timeout\n");
ifp->if_oerrors++;
stge_init_locked(sc);
STGE_UNLOCK(sc);
}
/*
* stge_ioctl: [ifnet interface function]
*
* Handle control requests from the operator.
*/
static int
stge_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
struct stge_softc *sc;
struct ifreq *ifr;
struct mii_data *mii;
int error, mask;
sc = ifp->if_softc;
ifr = (struct ifreq *)data;
error = 0;
switch (cmd) {
case SIOCSIFMTU:
if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > STGE_JUMBO_MTU)
error = EINVAL;
else if (ifp->if_mtu != ifr->ifr_mtu) {
ifp->if_mtu = ifr->ifr_mtu;
STGE_LOCK(sc);
stge_init_locked(sc);
STGE_UNLOCK(sc);
}
break;
case SIOCSIFFLAGS:
STGE_LOCK(sc);
if ((ifp->if_flags & IFF_UP) != 0) {
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
if (((ifp->if_flags ^ sc->sc_if_flags)
& IFF_PROMISC) != 0)
stge_set_filter(sc);
} else {
if (sc->sc_detach == 0)
stge_init_locked(sc);
}
} else {
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
stge_stop(sc);
}
sc->sc_if_flags = ifp->if_flags;
STGE_UNLOCK(sc);
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
STGE_LOCK(sc);
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
stge_set_multi(sc);
STGE_UNLOCK(sc);
break;
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
mii = device_get_softc(sc->sc_miibus);
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, cmd);
break;
case SIOCSIFCAP:
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
#ifdef DEVICE_POLLING
if ((mask & IFCAP_POLLING) != 0) {
if ((ifr->ifr_reqcap & IFCAP_POLLING) != 0) {
error = ether_poll_register(stge_poll, ifp);
if (error != 0)
break;
STGE_LOCK(sc);
CSR_WRITE_2(sc, STGE_IntEnable, 0);
ifp->if_capenable |= IFCAP_POLLING;
STGE_UNLOCK(sc);
} else {
error = ether_poll_deregister(ifp);
if (error != 0)
break;
STGE_LOCK(sc);
CSR_WRITE_2(sc, STGE_IntEnable,
sc->sc_IntEnable);
ifp->if_capenable &= ~IFCAP_POLLING;
STGE_UNLOCK(sc);
}
}
#endif
if ((mask & IFCAP_HWCSUM) != 0) {
ifp->if_capenable ^= IFCAP_HWCSUM;
if ((IFCAP_HWCSUM & ifp->if_capenable) != 0 &&
(IFCAP_HWCSUM & ifp->if_capabilities) != 0)
ifp->if_hwassist = STGE_CSUM_FEATURES;
else
ifp->if_hwassist = 0;
}
if ((mask & IFCAP_VLAN_HWTAGGING) != 0) {
ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
STGE_LOCK(sc);
stge_vlan_setup(sc);
STGE_UNLOCK(sc);
}
}
VLAN_CAPABILITIES(ifp);
break;
default:
error = ether_ioctl(ifp, cmd, data);
break;
}
return (error);
}
static void
stge_link_task(void *arg, int pending)
{
struct stge_softc *sc;
uint32_t v, ac;
int i;
sc = (struct stge_softc *)arg;
STGE_LOCK(sc);
/*
* Update STGE_MACCtrl register depending on link status.
* (duplex, flow control etc)
*/
v = ac = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
v &= ~(MC_DuplexSelect|MC_RxFlowControlEnable|MC_TxFlowControlEnable);
v |= sc->sc_MACCtrl;
CSR_WRITE_4(sc, STGE_MACCtrl, v);
if (((ac ^ sc->sc_MACCtrl) & MC_DuplexSelect) != 0) {
/* Duplex setting changed, reset Tx/Rx functions. */
ac = CSR_READ_4(sc, STGE_AsicCtrl);
ac |= AC_TxReset | AC_RxReset;
CSR_WRITE_4(sc, STGE_AsicCtrl, ac);
for (i = 0; i < STGE_TIMEOUT; i++) {
DELAY(100);
if ((CSR_READ_4(sc, STGE_AsicCtrl) & AC_ResetBusy) == 0)
break;
}
if (i == STGE_TIMEOUT)
device_printf(sc->sc_dev, "reset failed to complete\n");
}
STGE_UNLOCK(sc);
}
static __inline int
stge_tx_error(struct stge_softc *sc)
{
uint32_t txstat;
int error;
for (error = 0;;) {
txstat = CSR_READ_4(sc, STGE_TxStatus);
if ((txstat & TS_TxComplete) == 0)
break;
/* Tx underrun */
if ((txstat & TS_TxUnderrun) != 0) {
/*
* XXX
* There should be a more better way to recover
* from Tx underrun instead of a full reset.
*/
if (sc->sc_nerr++ < STGE_MAXERR)
device_printf(sc->sc_dev, "Tx underrun, "
"resetting...\n");
if (sc->sc_nerr == STGE_MAXERR)
device_printf(sc->sc_dev, "too many errors; "
"not reporting any more\n");
error = -1;
break;
}
/* Maximum/Late collisions, Re-enable Tx MAC. */
if ((txstat & (TS_MaxCollisions|TS_LateCollision)) != 0)
CSR_WRITE_4(sc, STGE_MACCtrl,
(CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK) |
MC_TxEnable);
}
return (error);
}
/*
* stge_intr:
*
* Interrupt service routine.
*/
static void
stge_intr(void *arg)
{
struct stge_softc *sc;
struct ifnet *ifp;
int reinit;
uint16_t status;
sc = (struct stge_softc *)arg;
ifp = sc->sc_ifp;
STGE_LOCK(sc);
#ifdef DEVICE_POLLING
if ((ifp->if_capenable & IFCAP_POLLING) != 0)
goto done_locked;
#endif
status = CSR_READ_2(sc, STGE_IntStatus);
if (sc->sc_suspended || (status & IS_InterruptStatus) == 0)
goto done_locked;
/* Disable interrupts. */
for (reinit = 0;;) {
status = CSR_READ_2(sc, STGE_IntStatusAck);
status &= sc->sc_IntEnable;
if (status == 0)
break;
/* Host interface errors. */
if ((status & IS_HostError) != 0) {
device_printf(sc->sc_dev,
"Host interface error, resetting...\n");
reinit = 1;
goto force_init;
}
/* Receive interrupts. */
if ((status & IS_RxDMAComplete) != 0) {
stge_rxeof(sc);
if ((status & IS_RFDListEnd) != 0)
CSR_WRITE_4(sc, STGE_DMACtrl,
DMAC_RxDMAPollNow);
}
/* Transmit interrupts. */
if ((status & (IS_TxDMAComplete | IS_TxComplete)) != 0)
stge_txeof(sc);
/* Transmission errors.*/
if ((status & IS_TxComplete) != 0) {
if ((reinit = stge_tx_error(sc)) != 0)
break;
}
}
force_init:
if (reinit != 0)
stge_init_locked(sc);
/* Re-enable interrupts. */
CSR_WRITE_2(sc, STGE_IntEnable, sc->sc_IntEnable);
/* Try to get more packets going. */
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
stge_start_locked(ifp);
done_locked:
STGE_UNLOCK(sc);
}
/*
* stge_txeof:
*
* Helper; handle transmit interrupts.
*/
static void
stge_txeof(struct stge_softc *sc)
{
struct ifnet *ifp;
struct stge_txdesc *txd;
uint64_t control;
int cons;
STGE_LOCK_ASSERT(sc);
ifp = sc->sc_ifp;
txd = STAILQ_FIRST(&sc->sc_cdata.stge_txbusyq);
if (txd == NULL)
return;
bus_dmamap_sync(sc->sc_cdata.stge_tx_ring_tag,
sc->sc_cdata.stge_tx_ring_map, BUS_DMASYNC_POSTREAD);
/*
* Go through our Tx list and free mbufs for those
* frames which have been transmitted.
*/
for (cons = sc->sc_cdata.stge_tx_cons;;
cons = (cons + 1) % STGE_TX_RING_CNT) {
if (sc->sc_cdata.stge_tx_cnt <= 0)
break;
control = le64toh(sc->sc_rdata.stge_tx_ring[cons].tfd_control);
if ((control & TFD_TFDDone) == 0)
break;
sc->sc_cdata.stge_tx_cnt--;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
bus_dmamap_sync(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap);
/* Output counter is updated with statistics register */
m_freem(txd->tx_m);
txd->tx_m = NULL;
STAILQ_REMOVE_HEAD(&sc->sc_cdata.stge_txbusyq, tx_q);
STAILQ_INSERT_TAIL(&sc->sc_cdata.stge_txfreeq, txd, tx_q);
txd = STAILQ_FIRST(&sc->sc_cdata.stge_txbusyq);
}
sc->sc_cdata.stge_tx_cons = cons;
if (sc->sc_cdata.stge_tx_cnt == 0)
ifp->if_timer = 0;
bus_dmamap_sync(sc->sc_cdata.stge_tx_ring_tag,
sc->sc_cdata.stge_tx_ring_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
}
static __inline void
stge_discard_rxbuf(struct stge_softc *sc, int idx)
{
struct stge_rfd *rfd;
rfd = &sc->sc_rdata.stge_rx_ring[idx];
rfd->rfd_status = 0;
}
#ifndef __NO_STRICT_ALIGNMENT
/*
* It seems that TC9021's DMA engine has alignment restrictions in
* DMA scatter operations. The first DMA segment has no address
* alignment restrictins but the rest should be aligned on 4(?) bytes
* boundary. Otherwise it would corrupt random memory. Since we don't
* know which one is used for the first segment in advance we simply
* don't align at all.
* To avoid copying over an entire frame to align, we allocate a new
* mbuf and copy ethernet header to the new mbuf. The new mbuf is
* prepended into the existing mbuf chain.
*/
static __inline struct mbuf *
stge_fixup_rx(struct stge_softc *sc, struct mbuf *m)
{
struct mbuf *n;
n = NULL;
if (m->m_len <= (MCLBYTES - ETHER_HDR_LEN)) {
bcopy(m->m_data, m->m_data + ETHER_HDR_LEN, m->m_len);
m->m_data += ETHER_HDR_LEN;
n = m;
} else {
MGETHDR(n, M_DONTWAIT, MT_DATA);
if (n != NULL) {
bcopy(m->m_data, n->m_data, ETHER_HDR_LEN);
m->m_data += ETHER_HDR_LEN;
m->m_len -= ETHER_HDR_LEN;
n->m_len = ETHER_HDR_LEN;
M_MOVE_PKTHDR(n, m);
n->m_next = m;
} else
m_freem(m);
}
return (n);
}
#endif
/*
* stge_rxeof:
*
* Helper; handle receive interrupts.
*/
static void
stge_rxeof(struct stge_softc *sc)
{
struct ifnet *ifp;
struct stge_rxdesc *rxd;
struct mbuf *mp, *m;
uint64_t status64;
uint32_t status;
int cons, prog;
STGE_LOCK_ASSERT(sc);
ifp = sc->sc_ifp;
bus_dmamap_sync(sc->sc_cdata.stge_rx_ring_tag,
sc->sc_cdata.stge_rx_ring_map, BUS_DMASYNC_POSTREAD);
prog = 0;
for (cons = sc->sc_cdata.stge_rx_cons; prog < STGE_RX_RING_CNT;
prog++, cons = (cons + 1) % STGE_RX_RING_CNT) {
status64 = le64toh(sc->sc_rdata.stge_rx_ring[cons].rfd_status);
status = RFD_RxStatus(status64);
if ((status & RFD_RFDDone) == 0)
break;
#ifdef DEVICE_POLLING
if (ifp->if_capenable & IFCAP_POLLING) {
if (sc->sc_cdata.stge_rxcycles <= 0)
break;
sc->sc_cdata.stge_rxcycles--;
}
#endif
prog++;
rxd = &sc->sc_cdata.stge_rxdesc[cons];
mp = rxd->rx_m;
/*
* If the packet had an error, drop it. Note we count
* the error later in the periodic stats update.
*/
if ((status & RFD_FrameEnd) != 0 && (status &
(RFD_RxFIFOOverrun | RFD_RxRuntFrame |
RFD_RxAlignmentError | RFD_RxFCSError |
RFD_RxLengthError)) != 0) {
stge_discard_rxbuf(sc, cons);
if (sc->sc_cdata.stge_rxhead != NULL) {
m_freem(sc->sc_cdata.stge_rxhead);
STGE_RXCHAIN_RESET(sc);
}
continue;
}
/*
* Add a new receive buffer to the ring.
*/
if (stge_newbuf(sc, cons) != 0) {
ifp->if_iqdrops++;
stge_discard_rxbuf(sc, cons);
if (sc->sc_cdata.stge_rxhead != NULL) {
m_freem(sc->sc_cdata.stge_rxhead);
STGE_RXCHAIN_RESET(sc);
}
continue;
}
if ((status & RFD_FrameEnd) != 0)
mp->m_len = RFD_RxDMAFrameLen(status) -
sc->sc_cdata.stge_rxlen;
sc->sc_cdata.stge_rxlen += mp->m_len;
/* Chain mbufs. */
if (sc->sc_cdata.stge_rxhead == NULL) {
sc->sc_cdata.stge_rxhead = mp;
sc->sc_cdata.stge_rxtail = mp;
} else {
mp->m_flags &= ~M_PKTHDR;
sc->sc_cdata.stge_rxtail->m_next = mp;
sc->sc_cdata.stge_rxtail = mp;
}
if ((status & RFD_FrameEnd) != 0) {
m = sc->sc_cdata.stge_rxhead;
m->m_pkthdr.rcvif = ifp;
m->m_pkthdr.len = sc->sc_cdata.stge_rxlen;
if (m->m_pkthdr.len > sc->sc_if_framesize) {
m_freem(m);
STGE_RXCHAIN_RESET(sc);
continue;
}
/*
* Set the incoming checksum information for
* the packet.
*/
if ((ifp->if_capenable & IFCAP_RXCSUM) != 0) {
if ((status & RFD_IPDetected) != 0) {
m->m_pkthdr.csum_flags |=
CSUM_IP_CHECKED;
if ((status & RFD_IPError) == 0)
m->m_pkthdr.csum_flags |=
CSUM_IP_VALID;
}
if (((status & RFD_TCPDetected) != 0 &&
(status & RFD_TCPError) == 0) ||
((status & RFD_UDPDetected) != 0 &&
(status & RFD_UDPError) == 0)) {
m->m_pkthdr.csum_flags |=
(CSUM_DATA_VALID | CSUM_PSEUDO_HDR);
m->m_pkthdr.csum_data = 0xffff;
}
}
#ifndef __NO_STRICT_ALIGNMENT
if (sc->sc_if_framesize > (MCLBYTES - ETHER_ALIGN)) {
if ((m = stge_fixup_rx(sc, m)) == NULL) {
STGE_RXCHAIN_RESET(sc);
continue;
}
}
#endif
/* Check for VLAN tagged packets. */
if ((status & RFD_VLANDetected) != 0 &&
(ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0) {
m->m_pkthdr.ether_vtag = RFD_TCI(status64);
m->m_flags |= M_VLANTAG;
}
STGE_UNLOCK(sc);
/* Pass it on. */
(*ifp->if_input)(ifp, m);
STGE_LOCK(sc);
STGE_RXCHAIN_RESET(sc);
}
}
if (prog > 0) {
/* Update the consumer index. */
sc->sc_cdata.stge_rx_cons = cons;
bus_dmamap_sync(sc->sc_cdata.stge_rx_ring_tag,
sc->sc_cdata.stge_rx_ring_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
}
}
#ifdef DEVICE_POLLING
static void
stge_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
{
struct stge_softc *sc;
uint16_t status;
sc = ifp->if_softc;
STGE_LOCK(sc);
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
STGE_UNLOCK(sc);
return;
}
sc->sc_cdata.stge_rxcycles = count;
stge_rxeof(sc);
stge_txeof(sc);
if (cmd == POLL_AND_CHECK_STATUS) {
status = CSR_READ_2(sc, STGE_IntStatus);
status &= sc->sc_IntEnable;
if (status != 0) {
if ((status & IS_HostError) != 0) {
device_printf(sc->sc_dev,
"Host interface error, resetting...\n");
stge_init_locked(sc);
}
if ((status & IS_TxComplete) != 0) {
if (stge_tx_error(sc) != 0)
stge_init_locked(sc);
}
}
}
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
stge_start_locked(ifp);
STGE_UNLOCK(sc);
}
#endif /* DEVICE_POLLING */
/*
* stge_tick:
*
* One second timer, used to tick the MII.
*/
static void
stge_tick(void *arg)
{
struct stge_softc *sc;
struct mii_data *mii;
sc = (struct stge_softc *)arg;
STGE_LOCK_ASSERT(sc);
mii = device_get_softc(sc->sc_miibus);
mii_tick(mii);
/* Update statistics counters. */
stge_stats_update(sc);
/*
* Relcaim any pending Tx descriptors to release mbufs in a
* timely manner as we don't generate Tx completion interrupts
* for every frame. This limits the delay to a maximum of one
* second.
*/
if (sc->sc_cdata.stge_tx_cnt != 0)
stge_txeof(sc);
callout_reset(&sc->sc_tick_ch, hz, stge_tick, sc);
}
/*
* stge_stats_update:
*
* Read the TC9021 statistics counters.
*/
static void
stge_stats_update(struct stge_softc *sc)
{
struct ifnet *ifp;
STGE_LOCK_ASSERT(sc);
ifp = sc->sc_ifp;
CSR_READ_4(sc,STGE_OctetRcvOk);
ifp->if_ipackets += CSR_READ_4(sc, STGE_FramesRcvdOk);
ifp->if_ierrors += CSR_READ_2(sc, STGE_FramesLostRxErrors);
CSR_READ_4(sc, STGE_OctetXmtdOk);
ifp->if_opackets += CSR_READ_4(sc, STGE_FramesXmtdOk);
ifp->if_collisions +=
CSR_READ_4(sc, STGE_LateCollisions) +
CSR_READ_4(sc, STGE_MultiColFrames) +
CSR_READ_4(sc, STGE_SingleColFrames);
ifp->if_oerrors +=
CSR_READ_2(sc, STGE_FramesAbortXSColls) +
CSR_READ_2(sc, STGE_FramesWEXDeferal);
}
/*
* stge_reset:
*
* Perform a soft reset on the TC9021.
*/
static void
stge_reset(struct stge_softc *sc, uint32_t how)
{
uint32_t ac;
uint8_t v;
int i, dv;
STGE_LOCK_ASSERT(sc);
dv = 5000;
ac = CSR_READ_4(sc, STGE_AsicCtrl);
switch (how) {
case STGE_RESET_TX:
ac |= AC_TxReset | AC_FIFO;
dv = 100;
break;
case STGE_RESET_RX:
ac |= AC_RxReset | AC_FIFO;
dv = 100;
break;
case STGE_RESET_FULL:
default:
/*
* Only assert RstOut if we're fiber. We need GMII clocks
* to be present in order for the reset to complete on fiber
* cards.
*/
ac |= AC_GlobalReset | AC_RxReset | AC_TxReset |
AC_DMA | AC_FIFO | AC_Network | AC_Host | AC_AutoInit |
(sc->sc_usefiber ? AC_RstOut : 0);
break;
}
CSR_WRITE_4(sc, STGE_AsicCtrl, ac);
/* Account for reset problem at 10Mbps. */
DELAY(dv);
for (i = 0; i < STGE_TIMEOUT; i++) {
if ((CSR_READ_4(sc, STGE_AsicCtrl) & AC_ResetBusy) == 0)
break;
DELAY(dv);
}
if (i == STGE_TIMEOUT)
device_printf(sc->sc_dev, "reset failed to complete\n");
/* Set LED, from Linux IPG driver. */
ac = CSR_READ_4(sc, STGE_AsicCtrl);
ac &= ~(AC_LEDMode | AC_LEDSpeed | AC_LEDModeBit1);
if ((sc->sc_led & 0x01) != 0)
ac |= AC_LEDMode;
if ((sc->sc_led & 0x03) != 0)
ac |= AC_LEDModeBit1;
if ((sc->sc_led & 0x08) != 0)
ac |= AC_LEDSpeed;
CSR_WRITE_4(sc, STGE_AsicCtrl, ac);
/* Set PHY, from Linux IPG driver */
v = CSR_READ_1(sc, STGE_PhySet);
v &= ~(PS_MemLenb9b | PS_MemLen | PS_NonCompdet);
v |= ((sc->sc_led & 0x70) >> 4);
CSR_WRITE_1(sc, STGE_PhySet, v);
}
/*
* stge_init: [ ifnet interface function ]
*
* Initialize the interface.
*/
static void
stge_init(void *xsc)
{
struct stge_softc *sc;
sc = (struct stge_softc *)xsc;
STGE_LOCK(sc);
stge_init_locked(sc);
STGE_UNLOCK(sc);
}
static void
stge_init_locked(struct stge_softc *sc)
{
struct ifnet *ifp;
struct mii_data *mii;
uint16_t eaddr[3];
uint32_t v;
int error;
STGE_LOCK_ASSERT(sc);
ifp = sc->sc_ifp;
mii = device_get_softc(sc->sc_miibus);
/*
* Cancel any pending I/O.
*/
stge_stop(sc);
/* Init descriptors. */
error = stge_init_rx_ring(sc);
if (error != 0) {
device_printf(sc->sc_dev,
"initialization failed: no memory for rx buffers\n");
stge_stop(sc);
goto out;
}
stge_init_tx_ring(sc);
/* Set the station address. */
bcopy(IF_LLADDR(ifp), eaddr, ETHER_ADDR_LEN);
CSR_WRITE_2(sc, STGE_StationAddress0, htole16(eaddr[0]));
CSR_WRITE_2(sc, STGE_StationAddress1, htole16(eaddr[1]));
CSR_WRITE_2(sc, STGE_StationAddress2, htole16(eaddr[2]));
/*
* Set the statistics masks. Disable all the RMON stats,
* and disable selected stats in the non-RMON stats registers.
*/
CSR_WRITE_4(sc, STGE_RMONStatisticsMask, 0xffffffff);
CSR_WRITE_4(sc, STGE_StatisticsMask,
(1U << 1) | (1U << 2) | (1U << 3) | (1U << 4) | (1U << 5) |
(1U << 6) | (1U << 7) | (1U << 8) | (1U << 9) | (1U << 10) |
(1U << 13) | (1U << 14) | (1U << 15) | (1U << 19) | (1U << 20) |
(1U << 21));
/* Set up the receive filter. */
stge_set_filter(sc);
/* Program multicast filter. */
stge_set_multi(sc);
/*
* Give the transmit and receive ring to the chip.
*/
CSR_WRITE_4(sc, STGE_TFDListPtrHi,
STGE_ADDR_HI(STGE_TX_RING_ADDR(sc, 0)));
CSR_WRITE_4(sc, STGE_TFDListPtrLo,
STGE_ADDR_LO(STGE_TX_RING_ADDR(sc, 0)));
CSR_WRITE_4(sc, STGE_RFDListPtrHi,
STGE_ADDR_HI(STGE_RX_RING_ADDR(sc, 0)));
CSR_WRITE_4(sc, STGE_RFDListPtrLo,
STGE_ADDR_LO(STGE_RX_RING_ADDR(sc, 0)));
/*
* Initialize the Tx auto-poll period. It's OK to make this number
* large (255 is the max, but we use 127) -- we explicitly kick the
* transmit engine when there's actually a packet.
*/
CSR_WRITE_1(sc, STGE_TxDMAPollPeriod, 127);
/* ..and the Rx auto-poll period. */
CSR_WRITE_1(sc, STGE_RxDMAPollPeriod, 1);
/* Initialize the Tx start threshold. */
CSR_WRITE_2(sc, STGE_TxStartThresh, sc->sc_txthresh);
/* Rx DMA thresholds, from Linux */
CSR_WRITE_1(sc, STGE_RxDMABurstThresh, 0x30);
CSR_WRITE_1(sc, STGE_RxDMAUrgentThresh, 0x30);
/* Rx early threhold, from Linux */
CSR_WRITE_2(sc, STGE_RxEarlyThresh, 0x7ff);
/* Tx DMA thresholds, from Linux */
CSR_WRITE_1(sc, STGE_TxDMABurstThresh, 0x30);
CSR_WRITE_1(sc, STGE_TxDMAUrgentThresh, 0x04);
/*
* Initialize the Rx DMA interrupt control register. We
* request an interrupt after every incoming packet, but
* defer it for sc_rxint_dmawait us. When the number of
* interrupts pending reaches STGE_RXINT_NFRAME, we stop
* deferring the interrupt, and signal it immediately.
*/
CSR_WRITE_4(sc, STGE_RxDMAIntCtrl,
RDIC_RxFrameCount(sc->sc_rxint_nframe) |
RDIC_RxDMAWaitTime(STGE_RXINT_USECS2TICK(sc->sc_rxint_dmawait)));
/*
* Initialize the interrupt mask.
*/
sc->sc_IntEnable = IS_HostError | IS_TxComplete |
IS_TxDMAComplete | IS_RxDMAComplete | IS_RFDListEnd;
#ifdef DEVICE_POLLING
/* Disable interrupts if we are polling. */
if ((ifp->if_capenable & IFCAP_POLLING) != 0)
CSR_WRITE_2(sc, STGE_IntEnable, 0);
else
#endif
CSR_WRITE_2(sc, STGE_IntEnable, sc->sc_IntEnable);
/*
* Configure the DMA engine.
* XXX Should auto-tune TxBurstLimit.
*/
CSR_WRITE_4(sc, STGE_DMACtrl, sc->sc_DMACtrl | DMAC_TxBurstLimit(3));
/*
* Send a PAUSE frame when we reach 29,696 bytes in the Rx
* FIFO, and send an un-PAUSE frame when we reach 3056 bytes
* in the Rx FIFO.
*/
CSR_WRITE_2(sc, STGE_FlowOnTresh, 29696 / 16);
CSR_WRITE_2(sc, STGE_FlowOffThresh, 3056 / 16);
/*
* Set the maximum frame size.
*/
sc->sc_if_framesize = ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
CSR_WRITE_2(sc, STGE_MaxFrameSize, sc->sc_if_framesize);
/*
* Initialize MacCtrl -- do it before setting the media,
* as setting the media will actually program the register.
*
* Note: We have to poke the IFS value before poking
* anything else.
*/
/* Tx/Rx MAC should be disabled before programming IFS.*/
CSR_WRITE_4(sc, STGE_MACCtrl, MC_IFSSelect(MC_IFS96bit));
stge_vlan_setup(sc);
if (sc->sc_rev >= 6) { /* >= B.2 */
/* Multi-frag frame bug work-around. */
CSR_WRITE_2(sc, STGE_DebugCtrl,
CSR_READ_2(sc, STGE_DebugCtrl) | 0x0200);
/* Tx Poll Now bug work-around. */
CSR_WRITE_2(sc, STGE_DebugCtrl,
CSR_READ_2(sc, STGE_DebugCtrl) | 0x0010);
/* Tx Poll Now bug work-around. */
CSR_WRITE_2(sc, STGE_DebugCtrl,
CSR_READ_2(sc, STGE_DebugCtrl) | 0x0020);
}
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
v |= MC_StatisticsEnable | MC_TxEnable | MC_RxEnable;
CSR_WRITE_4(sc, STGE_MACCtrl, v);
/*
* It seems that transmitting frames without checking the state of
* Rx/Tx MAC wedge the hardware.
*/
stge_start_tx(sc);
stge_start_rx(sc);
/*
* Set the current media.
*/
mii_mediachg(mii);
/*
* Start the one second MII clock.
*/
callout_reset(&sc->sc_tick_ch, hz, stge_tick, sc);
/*
* ...all done!
*/
ifp->if_drv_flags |= IFF_DRV_RUNNING;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
out:
if (error != 0)
device_printf(sc->sc_dev, "interface not running\n");
}
static void
stge_vlan_setup(struct stge_softc *sc)
{
struct ifnet *ifp;
uint32_t v;
ifp = sc->sc_ifp;
/*
* The NIC always copy a VLAN tag regardless of STGE_MACCtrl
* MC_AutoVLANuntagging bit.
* MC_AutoVLANtagging bit selects which VLAN source to use
* between STGE_VLANTag and TFC. However TFC TFD_VLANTagInsert
* bit has priority over MC_AutoVLANtagging bit. So we always
* use TFC instead of STGE_VLANTag register.
*/
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0)
v |= MC_AutoVLANuntagging;
else
v &= ~MC_AutoVLANuntagging;
CSR_WRITE_4(sc, STGE_MACCtrl, v);
}
/*
* Stop transmission on the interface.
*/
static void
stge_stop(struct stge_softc *sc)
{
struct ifnet *ifp;
struct stge_txdesc *txd;
struct stge_rxdesc *rxd;
uint32_t v;
int i;
STGE_LOCK_ASSERT(sc);
/*
* Stop the one second clock.
*/
callout_stop(&sc->sc_tick_ch);
/*
* Reset the chip to a known state.
*/
stge_reset(sc, STGE_RESET_FULL);
/*
* Disable interrupts.
*/
CSR_WRITE_2(sc, STGE_IntEnable, 0);
/*
* Stop receiver, transmitter, and stats update.
*/
stge_stop_rx(sc);
stge_stop_tx(sc);
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
v |= MC_StatisticsDisable;
CSR_WRITE_4(sc, STGE_MACCtrl, v);
/*
* Stop the transmit and receive DMA.
*/
stge_dma_wait(sc);
CSR_WRITE_4(sc, STGE_TFDListPtrHi, 0);
CSR_WRITE_4(sc, STGE_TFDListPtrLo, 0);
CSR_WRITE_4(sc, STGE_RFDListPtrHi, 0);
CSR_WRITE_4(sc, STGE_RFDListPtrLo, 0);
/*
* Free RX and TX mbufs still in the queues.
*/
for (i = 0; i < STGE_RX_RING_CNT; i++) {
rxd = &sc->sc_cdata.stge_rxdesc[i];
if (rxd->rx_m != NULL) {
bus_dmamap_sync(sc->sc_cdata.stge_rx_tag,
rxd->rx_dmamap, BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->sc_cdata.stge_rx_tag,
rxd->rx_dmamap);
m_freem(rxd->rx_m);
rxd->rx_m = NULL;
}
}
for (i = 0; i < STGE_TX_RING_CNT; i++) {
txd = &sc->sc_cdata.stge_txdesc[i];
if (txd->tx_m != NULL) {
bus_dmamap_sync(sc->sc_cdata.stge_tx_tag,
txd->tx_dmamap, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_cdata.stge_tx_tag,
txd->tx_dmamap);
m_freem(txd->tx_m);
txd->tx_m = NULL;
}
}
/*
* Mark the interface down and cancel the watchdog timer.
*/
ifp = sc->sc_ifp;
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
ifp->if_timer = 0;
}
static void
stge_start_tx(struct stge_softc *sc)
{
uint32_t v;
int i;
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((v & MC_TxEnabled) != 0)
return;
v |= MC_TxEnable;
CSR_WRITE_4(sc, STGE_MACCtrl, v);
CSR_WRITE_1(sc, STGE_TxDMAPollPeriod, 127);
for (i = STGE_TIMEOUT; i > 0; i--) {
DELAY(10);
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((v & MC_TxEnabled) != 0)
break;
}
if (i == 0)
device_printf(sc->sc_dev, "Starting Tx MAC timed out\n");
}
static void
stge_start_rx(struct stge_softc *sc)
{
uint32_t v;
int i;
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((v & MC_RxEnabled) != 0)
return;
v |= MC_RxEnable;
CSR_WRITE_4(sc, STGE_MACCtrl, v);
CSR_WRITE_1(sc, STGE_RxDMAPollPeriod, 1);
for (i = STGE_TIMEOUT; i > 0; i--) {
DELAY(10);
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((v & MC_RxEnabled) != 0)
break;
}
if (i == 0)
device_printf(sc->sc_dev, "Starting Rx MAC timed out\n");
}
static void
stge_stop_tx(struct stge_softc *sc)
{
uint32_t v;
int i;
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((v & MC_TxEnabled) == 0)
return;
v |= MC_TxDisable;
CSR_WRITE_4(sc, STGE_MACCtrl, v);
for (i = STGE_TIMEOUT; i > 0; i--) {
DELAY(10);
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((v & MC_TxEnabled) == 0)
break;
}
if (i == 0)
device_printf(sc->sc_dev, "Stopping Tx MAC timed out\n");
}
static void
stge_stop_rx(struct stge_softc *sc)
{
uint32_t v;
int i;
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((v & MC_RxEnabled) == 0)
return;
v |= MC_RxDisable;
CSR_WRITE_4(sc, STGE_MACCtrl, v);
for (i = STGE_TIMEOUT; i > 0; i--) {
DELAY(10);
v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
if ((v & MC_RxEnabled) == 0)
break;
}
if (i == 0)
device_printf(sc->sc_dev, "Stopping Rx MAC timed out\n");
}
static void
stge_init_tx_ring(struct stge_softc *sc)
{
struct stge_ring_data *rd;
struct stge_txdesc *txd;
bus_addr_t addr;
int i;
STAILQ_INIT(&sc->sc_cdata.stge_txfreeq);
STAILQ_INIT(&sc->sc_cdata.stge_txbusyq);
sc->sc_cdata.stge_tx_prod = 0;
sc->sc_cdata.stge_tx_cons = 0;
sc->sc_cdata.stge_tx_cnt = 0;
rd = &sc->sc_rdata;
bzero(rd->stge_tx_ring, STGE_TX_RING_SZ);
for (i = 0; i < STGE_TX_RING_CNT; i++) {
if (i == (STGE_TX_RING_CNT - 1))
addr = STGE_TX_RING_ADDR(sc, 0);
else
addr = STGE_TX_RING_ADDR(sc, i + 1);
rd->stge_tx_ring[i].tfd_next = htole64(addr);
rd->stge_tx_ring[i].tfd_control = htole64(TFD_TFDDone);
txd = &sc->sc_cdata.stge_txdesc[i];
STAILQ_INSERT_TAIL(&sc->sc_cdata.stge_txfreeq, txd, tx_q);
}
bus_dmamap_sync(sc->sc_cdata.stge_tx_ring_tag,
sc->sc_cdata.stge_tx_ring_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
}
static int
stge_init_rx_ring(struct stge_softc *sc)
{
struct stge_ring_data *rd;
bus_addr_t addr;
int i;
sc->sc_cdata.stge_rx_cons = 0;
STGE_RXCHAIN_RESET(sc);
rd = &sc->sc_rdata;
bzero(rd->stge_rx_ring, STGE_RX_RING_SZ);
for (i = 0; i < STGE_RX_RING_CNT; i++) {
if (stge_newbuf(sc, i) != 0)
return (ENOBUFS);
if (i == (STGE_RX_RING_CNT - 1))
addr = STGE_RX_RING_ADDR(sc, 0);
else
addr = STGE_RX_RING_ADDR(sc, i + 1);
rd->stge_rx_ring[i].rfd_next = htole64(addr);
rd->stge_rx_ring[i].rfd_status = 0;
}
bus_dmamap_sync(sc->sc_cdata.stge_rx_ring_tag,
sc->sc_cdata.stge_rx_ring_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
return (0);
}
/*
* stge_newbuf:
*
* Add a receive buffer to the indicated descriptor.
*/
static int
stge_newbuf(struct stge_softc *sc, int idx)
{
struct stge_rxdesc *rxd;
struct stge_rfd *rfd;
struct mbuf *m;
bus_dma_segment_t segs[1];
bus_dmamap_t map;
int nsegs;
m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
if (m == NULL)
return (ENOBUFS);
m->m_len = m->m_pkthdr.len = MCLBYTES;
/*
* The hardware requires 4bytes aligned DMA address when JUMBO
* frame is used.
*/
if (sc->sc_if_framesize <= (MCLBYTES - ETHER_ALIGN))
m_adj(m, ETHER_ALIGN);
if (bus_dmamap_load_mbuf_sg(sc->sc_cdata.stge_rx_tag,
sc->sc_cdata.stge_rx_sparemap, m, segs, &nsegs, 0) != 0) {
m_freem(m);
return (ENOBUFS);
}
KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs));
rxd = &sc->sc_cdata.stge_rxdesc[idx];
if (rxd->rx_m != NULL) {
bus_dmamap_sync(sc->sc_cdata.stge_rx_tag, rxd->rx_dmamap,
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->sc_cdata.stge_rx_tag, rxd->rx_dmamap);
}
map = rxd->rx_dmamap;
rxd->rx_dmamap = sc->sc_cdata.stge_rx_sparemap;
sc->sc_cdata.stge_rx_sparemap = map;
bus_dmamap_sync(sc->sc_cdata.stge_rx_tag, rxd->rx_dmamap,
BUS_DMASYNC_PREREAD);
rxd->rx_m = m;
rfd = &sc->sc_rdata.stge_rx_ring[idx];
rfd->rfd_frag.frag_word0 =
htole64(FRAG_ADDR(segs[0].ds_addr) | FRAG_LEN(segs[0].ds_len));
rfd->rfd_status = 0;
return (0);
}
/*
* stge_set_filter:
*
* Set up the receive filter.
*/
static void
stge_set_filter(struct stge_softc *sc)
{
struct ifnet *ifp;
uint16_t mode;
STGE_LOCK_ASSERT(sc);
ifp = sc->sc_ifp;
mode = CSR_READ_2(sc, STGE_ReceiveMode);
mode |= RM_ReceiveUnicast;
if ((ifp->if_flags & IFF_BROADCAST) != 0)
mode |= RM_ReceiveBroadcast;
else
mode &= ~RM_ReceiveBroadcast;
if ((ifp->if_flags & IFF_PROMISC) != 0)
mode |= RM_ReceiveAllFrames;
else
mode &= ~RM_ReceiveAllFrames;
CSR_WRITE_2(sc, STGE_ReceiveMode, mode);
}
static void
stge_set_multi(struct stge_softc *sc)
{
struct ifnet *ifp;
struct ifmultiaddr *ifma;
uint32_t crc;
uint32_t mchash[2];
uint16_t mode;
int count;
STGE_LOCK_ASSERT(sc);
ifp = sc->sc_ifp;
mode = CSR_READ_2(sc, STGE_ReceiveMode);
if ((ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI)) != 0) {
if ((ifp->if_flags & IFF_PROMISC) != 0)
mode |= RM_ReceiveAllFrames;
else if ((ifp->if_flags & IFF_ALLMULTI) != 0)
mode |= RM_ReceiveMulticast;
CSR_WRITE_2(sc, STGE_ReceiveMode, mode);
return;
}
/* clear existing filters. */
CSR_WRITE_4(sc, STGE_HashTable0, 0);
CSR_WRITE_4(sc, STGE_HashTable1, 0);
/*
* Set up the multicast address filter by passing all multicast
* addresses through a CRC generator, and then using the low-order
* 6 bits as an index into the 64 bit multicast hash table. The
* high order bits select the register, while the rest of the bits
* select the bit within the register.
*/
bzero(mchash, sizeof(mchash));
count = 0;
IF_ADDR_LOCK(sc->sc_ifp);
TAILQ_FOREACH(ifma, &sc->sc_ifp->if_multiaddrs, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
crc = ether_crc32_be(LLADDR((struct sockaddr_dl *)
ifma->ifma_addr), ETHER_ADDR_LEN);
/* Just want the 6 least significant bits. */
crc &= 0x3f;
/* Set the corresponding bit in the hash table. */
mchash[crc >> 5] |= 1 << (crc & 0x1f);
count++;
}
IF_ADDR_UNLOCK(ifp);
mode &= ~(RM_ReceiveMulticast | RM_ReceiveAllFrames);
if (count > 0)
mode |= RM_ReceiveMulticastHash;
else
mode &= ~RM_ReceiveMulticastHash;
CSR_WRITE_4(sc, STGE_HashTable0, mchash[0]);
CSR_WRITE_4(sc, STGE_HashTable1, mchash[1]);
CSR_WRITE_2(sc, STGE_ReceiveMode, mode);
}
static int
sysctl_int_range(SYSCTL_HANDLER_ARGS, int low, int high)
{
int error, value;
if (!arg1)
return (EINVAL);
value = *(int *)arg1;
error = sysctl_handle_int(oidp, &value, 0, req);
if (error || !req->newptr)
return (error);
if (value < low || value > high)
return (EINVAL);
*(int *)arg1 = value;
return (0);
}
static int
sysctl_hw_stge_rxint_nframe(SYSCTL_HANDLER_ARGS)
{
return (sysctl_int_range(oidp, arg1, arg2, req,
STGE_RXINT_NFRAME_MIN, STGE_RXINT_NFRAME_MAX));
}
static int
sysctl_hw_stge_rxint_dmawait(SYSCTL_HANDLER_ARGS)
{
return (sysctl_int_range(oidp, arg1, arg2, req,
STGE_RXINT_DMAWAIT_MIN, STGE_RXINT_DMAWAIT_MAX));
}
Reference in New Issue View Git Blame Copy Permalink