717568ad8d
Submitted by: Sreekanth Rupavatharam <rupavath@juniper.net> Obtained from: Juniper Networks, Inc.
18818 lines
579 KiB
C
18818 lines
579 KiB
C
/*-
|
|
* Copyright (c) 2007-2014 QLogic Corporation. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#define BXE_DRIVER_VERSION "1.78.78"
|
|
|
|
#include "bxe.h"
|
|
#include "ecore_sp.h"
|
|
#include "ecore_init.h"
|
|
#include "ecore_init_ops.h"
|
|
|
|
#include "57710_int_offsets.h"
|
|
#include "57711_int_offsets.h"
|
|
#include "57712_int_offsets.h"
|
|
|
|
/*
|
|
* CTLTYPE_U64 and sysctl_handle_64 were added in r217616. Define these
|
|
* explicitly here for older kernels that don't include this changeset.
|
|
*/
|
|
#ifndef CTLTYPE_U64
|
|
#define CTLTYPE_U64 CTLTYPE_QUAD
|
|
#define sysctl_handle_64 sysctl_handle_quad
|
|
#endif
|
|
|
|
/*
|
|
* CSUM_TCP_IPV6 and CSUM_UDP_IPV6 were added in r236170. Define these
|
|
* here as zero(0) for older kernels that don't include this changeset
|
|
* thereby masking the functionality.
|
|
*/
|
|
#ifndef CSUM_TCP_IPV6
|
|
#define CSUM_TCP_IPV6 0
|
|
#define CSUM_UDP_IPV6 0
|
|
#endif
|
|
|
|
/*
|
|
* pci_find_cap was added in r219865. Re-define this at pci_find_extcap
|
|
* for older kernels that don't include this changeset.
|
|
*/
|
|
#if __FreeBSD_version < 900035
|
|
#define pci_find_cap pci_find_extcap
|
|
#endif
|
|
|
|
#define BXE_DEF_SB_ATT_IDX 0x0001
|
|
#define BXE_DEF_SB_IDX 0x0002
|
|
|
|
/*
|
|
* FLR Support - bxe_pf_flr_clnup() is called during nic_load in the per
|
|
* function HW initialization.
|
|
*/
|
|
#define FLR_WAIT_USEC 10000 /* 10 msecs */
|
|
#define FLR_WAIT_INTERVAL 50 /* usecs */
|
|
#define FLR_POLL_CNT (FLR_WAIT_USEC / FLR_WAIT_INTERVAL) /* 200 */
|
|
|
|
struct pbf_pN_buf_regs {
|
|
int pN;
|
|
uint32_t init_crd;
|
|
uint32_t crd;
|
|
uint32_t crd_freed;
|
|
};
|
|
|
|
struct pbf_pN_cmd_regs {
|
|
int pN;
|
|
uint32_t lines_occup;
|
|
uint32_t lines_freed;
|
|
};
|
|
|
|
/*
|
|
* PCI Device ID Table used by bxe_probe().
|
|
*/
|
|
#define BXE_DEVDESC_MAX 64
|
|
static struct bxe_device_type bxe_devs[] = {
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57710,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57710 10GbE"
|
|
},
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57711,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57711 10GbE"
|
|
},
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57711E,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57711E 10GbE"
|
|
},
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57712,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57712 10GbE"
|
|
},
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57712_MF,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57712 MF 10GbE"
|
|
},
|
|
#if 0
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57712_VF,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57712 VF 10GbE"
|
|
},
|
|
#endif
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57800,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57800 10GbE"
|
|
},
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57800_MF,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57800 MF 10GbE"
|
|
},
|
|
#if 0
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57800_VF,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57800 VF 10GbE"
|
|
},
|
|
#endif
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57810,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57810 10GbE"
|
|
},
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57810_MF,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57810 MF 10GbE"
|
|
},
|
|
#if 0
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57810_VF,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57810 VF 10GbE"
|
|
},
|
|
#endif
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57811,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57811 10GbE"
|
|
},
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57811_MF,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57811 MF 10GbE"
|
|
},
|
|
#if 0
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57811_VF,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57811 VF 10GbE"
|
|
},
|
|
#endif
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57840_4_10,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57840 4x10GbE"
|
|
},
|
|
#if 0
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57840_2_20,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57840 2x20GbE"
|
|
},
|
|
#endif
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57840_MF,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57840 MF 10GbE"
|
|
},
|
|
#if 0
|
|
{
|
|
BRCM_VENDORID,
|
|
CHIP_NUM_57840_VF,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
"QLogic NetXtreme II BCM57840 VF 10GbE"
|
|
},
|
|
#endif
|
|
{
|
|
0, 0, 0, 0, NULL
|
|
}
|
|
};
|
|
|
|
MALLOC_DECLARE(M_BXE_ILT);
|
|
MALLOC_DEFINE(M_BXE_ILT, "bxe_ilt", "bxe ILT pointer");
|
|
|
|
/*
|
|
* FreeBSD device entry points.
|
|
*/
|
|
static int bxe_probe(device_t);
|
|
static int bxe_attach(device_t);
|
|
static int bxe_detach(device_t);
|
|
static int bxe_shutdown(device_t);
|
|
|
|
/*
|
|
* FreeBSD KLD module/device interface event handler method.
|
|
*/
|
|
static device_method_t bxe_methods[] = {
|
|
/* Device interface (device_if.h) */
|
|
DEVMETHOD(device_probe, bxe_probe),
|
|
DEVMETHOD(device_attach, bxe_attach),
|
|
DEVMETHOD(device_detach, bxe_detach),
|
|
DEVMETHOD(device_shutdown, bxe_shutdown),
|
|
#if 0
|
|
DEVMETHOD(device_suspend, bxe_suspend),
|
|
DEVMETHOD(device_resume, bxe_resume),
|
|
#endif
|
|
/* Bus interface (bus_if.h) */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
|
|
KOBJMETHOD_END
|
|
};
|
|
|
|
/*
|
|
* FreeBSD KLD Module data declaration
|
|
*/
|
|
static driver_t bxe_driver = {
|
|
"bxe", /* module name */
|
|
bxe_methods, /* event handler */
|
|
sizeof(struct bxe_softc) /* extra data */
|
|
};
|
|
|
|
/*
|
|
* FreeBSD dev class is needed to manage dev instances and
|
|
* to associate with a bus type
|
|
*/
|
|
static devclass_t bxe_devclass;
|
|
|
|
MODULE_DEPEND(bxe, pci, 1, 1, 1);
|
|
MODULE_DEPEND(bxe, ether, 1, 1, 1);
|
|
DRIVER_MODULE(bxe, pci, bxe_driver, bxe_devclass, 0, 0);
|
|
|
|
/* resources needed for unloading a previously loaded device */
|
|
|
|
#define BXE_PREV_WAIT_NEEDED 1
|
|
struct mtx bxe_prev_mtx;
|
|
MTX_SYSINIT(bxe_prev_mtx, &bxe_prev_mtx, "bxe_prev_lock", MTX_DEF);
|
|
struct bxe_prev_list_node {
|
|
LIST_ENTRY(bxe_prev_list_node) node;
|
|
uint8_t bus;
|
|
uint8_t slot;
|
|
uint8_t path;
|
|
uint8_t aer; /* XXX automatic error recovery */
|
|
uint8_t undi;
|
|
};
|
|
static LIST_HEAD(, bxe_prev_list_node) bxe_prev_list = LIST_HEAD_INITIALIZER(bxe_prev_list);
|
|
|
|
static int load_count[2][3] = { {0} }; /* per-path: 0-common, 1-port0, 2-port1 */
|
|
|
|
/* Tunable device values... */
|
|
|
|
SYSCTL_NODE(_hw, OID_AUTO, bxe, CTLFLAG_RD, 0, "bxe driver parameters");
|
|
|
|
/* Debug */
|
|
unsigned long bxe_debug = 0;
|
|
TUNABLE_ULONG("hw.bxe.debug", &bxe_debug);
|
|
SYSCTL_ULONG(_hw_bxe, OID_AUTO, debug, (CTLFLAG_RDTUN),
|
|
&bxe_debug, 0, "Debug logging mode");
|
|
|
|
/* Interrupt Mode: 0 (IRQ), 1 (MSI/IRQ), and 2 (MSI-X/MSI/IRQ) */
|
|
static int bxe_interrupt_mode = INTR_MODE_MSIX;
|
|
TUNABLE_INT("hw.bxe.interrupt_mode", &bxe_interrupt_mode);
|
|
SYSCTL_INT(_hw_bxe, OID_AUTO, interrupt_mode, CTLFLAG_RDTUN,
|
|
&bxe_interrupt_mode, 0, "Interrupt (MSI-X/MSI/INTx) mode");
|
|
|
|
/* Number of Queues: 0 (Auto) or 1 to 16 (fixed queue number) */
|
|
static int bxe_queue_count = 4;
|
|
TUNABLE_INT("hw.bxe.queue_count", &bxe_queue_count);
|
|
SYSCTL_INT(_hw_bxe, OID_AUTO, queue_count, CTLFLAG_RDTUN,
|
|
&bxe_queue_count, 0, "Multi-Queue queue count");
|
|
|
|
/* max number of buffers per queue (default RX_BD_USABLE) */
|
|
static int bxe_max_rx_bufs = 0;
|
|
TUNABLE_INT("hw.bxe.max_rx_bufs", &bxe_max_rx_bufs);
|
|
SYSCTL_INT(_hw_bxe, OID_AUTO, max_rx_bufs, CTLFLAG_RDTUN,
|
|
&bxe_max_rx_bufs, 0, "Maximum Number of Rx Buffers Per Queue");
|
|
|
|
/* Host interrupt coalescing RX tick timer (usecs) */
|
|
static int bxe_hc_rx_ticks = 25;
|
|
TUNABLE_INT("hw.bxe.hc_rx_ticks", &bxe_hc_rx_ticks);
|
|
SYSCTL_INT(_hw_bxe, OID_AUTO, hc_rx_ticks, CTLFLAG_RDTUN,
|
|
&bxe_hc_rx_ticks, 0, "Host Coalescing Rx ticks");
|
|
|
|
/* Host interrupt coalescing TX tick timer (usecs) */
|
|
static int bxe_hc_tx_ticks = 50;
|
|
TUNABLE_INT("hw.bxe.hc_tx_ticks", &bxe_hc_tx_ticks);
|
|
SYSCTL_INT(_hw_bxe, OID_AUTO, hc_tx_ticks, CTLFLAG_RDTUN,
|
|
&bxe_hc_tx_ticks, 0, "Host Coalescing Tx ticks");
|
|
|
|
/* Maximum number of Rx packets to process at a time */
|
|
static int bxe_rx_budget = 0xffffffff;
|
|
TUNABLE_INT("hw.bxe.rx_budget", &bxe_rx_budget);
|
|
SYSCTL_INT(_hw_bxe, OID_AUTO, rx_budget, CTLFLAG_TUN,
|
|
&bxe_rx_budget, 0, "Rx processing budget");
|
|
|
|
/* Maximum LRO aggregation size */
|
|
static int bxe_max_aggregation_size = 0;
|
|
TUNABLE_INT("hw.bxe.max_aggregation_size", &bxe_max_aggregation_size);
|
|
SYSCTL_INT(_hw_bxe, OID_AUTO, max_aggregation_size, CTLFLAG_TUN,
|
|
&bxe_max_aggregation_size, 0, "max aggregation size");
|
|
|
|
/* PCI MRRS: -1 (Auto), 0 (128B), 1 (256B), 2 (512B), 3 (1KB) */
|
|
static int bxe_mrrs = -1;
|
|
TUNABLE_INT("hw.bxe.mrrs", &bxe_mrrs);
|
|
SYSCTL_INT(_hw_bxe, OID_AUTO, mrrs, CTLFLAG_RDTUN,
|
|
&bxe_mrrs, 0, "PCIe maximum read request size");
|
|
|
|
/* AutoGrEEEn: 0 (hardware default), 1 (force on), 2 (force off) */
|
|
static int bxe_autogreeen = 0;
|
|
TUNABLE_INT("hw.bxe.autogreeen", &bxe_autogreeen);
|
|
SYSCTL_INT(_hw_bxe, OID_AUTO, autogreeen, CTLFLAG_RDTUN,
|
|
&bxe_autogreeen, 0, "AutoGrEEEn support");
|
|
|
|
/* 4-tuple RSS support for UDP: 0 (disabled), 1 (enabled) */
|
|
static int bxe_udp_rss = 0;
|
|
TUNABLE_INT("hw.bxe.udp_rss", &bxe_udp_rss);
|
|
SYSCTL_INT(_hw_bxe, OID_AUTO, udp_rss, CTLFLAG_RDTUN,
|
|
&bxe_udp_rss, 0, "UDP RSS support");
|
|
|
|
|
|
#define STAT_NAME_LEN 32 /* no stat names below can be longer than this */
|
|
|
|
#define STATS_OFFSET32(stat_name) \
|
|
(offsetof(struct bxe_eth_stats, stat_name) / 4)
|
|
|
|
#define Q_STATS_OFFSET32(stat_name) \
|
|
(offsetof(struct bxe_eth_q_stats, stat_name) / 4)
|
|
|
|
static const struct {
|
|
uint32_t offset;
|
|
uint32_t size;
|
|
uint32_t flags;
|
|
#define STATS_FLAGS_PORT 1
|
|
#define STATS_FLAGS_FUNC 2 /* MF only cares about function stats */
|
|
#define STATS_FLAGS_BOTH (STATS_FLAGS_FUNC | STATS_FLAGS_PORT)
|
|
char string[STAT_NAME_LEN];
|
|
} bxe_eth_stats_arr[] = {
|
|
{ STATS_OFFSET32(total_bytes_received_hi),
|
|
8, STATS_FLAGS_BOTH, "rx_bytes" },
|
|
{ STATS_OFFSET32(error_bytes_received_hi),
|
|
8, STATS_FLAGS_BOTH, "rx_error_bytes" },
|
|
{ STATS_OFFSET32(total_unicast_packets_received_hi),
|
|
8, STATS_FLAGS_BOTH, "rx_ucast_packets" },
|
|
{ STATS_OFFSET32(total_multicast_packets_received_hi),
|
|
8, STATS_FLAGS_BOTH, "rx_mcast_packets" },
|
|
{ STATS_OFFSET32(total_broadcast_packets_received_hi),
|
|
8, STATS_FLAGS_BOTH, "rx_bcast_packets" },
|
|
{ STATS_OFFSET32(rx_stat_dot3statsfcserrors_hi),
|
|
8, STATS_FLAGS_PORT, "rx_crc_errors" },
|
|
{ STATS_OFFSET32(rx_stat_dot3statsalignmenterrors_hi),
|
|
8, STATS_FLAGS_PORT, "rx_align_errors" },
|
|
{ STATS_OFFSET32(rx_stat_etherstatsundersizepkts_hi),
|
|
8, STATS_FLAGS_PORT, "rx_undersize_packets" },
|
|
{ STATS_OFFSET32(etherstatsoverrsizepkts_hi),
|
|
8, STATS_FLAGS_PORT, "rx_oversize_packets" },
|
|
{ STATS_OFFSET32(rx_stat_etherstatsfragments_hi),
|
|
8, STATS_FLAGS_PORT, "rx_fragments" },
|
|
{ STATS_OFFSET32(rx_stat_etherstatsjabbers_hi),
|
|
8, STATS_FLAGS_PORT, "rx_jabbers" },
|
|
{ STATS_OFFSET32(no_buff_discard_hi),
|
|
8, STATS_FLAGS_BOTH, "rx_discards" },
|
|
{ STATS_OFFSET32(mac_filter_discard),
|
|
4, STATS_FLAGS_PORT, "rx_filtered_packets" },
|
|
{ STATS_OFFSET32(mf_tag_discard),
|
|
4, STATS_FLAGS_PORT, "rx_mf_tag_discard" },
|
|
{ STATS_OFFSET32(pfc_frames_received_hi),
|
|
8, STATS_FLAGS_PORT, "pfc_frames_received" },
|
|
{ STATS_OFFSET32(pfc_frames_sent_hi),
|
|
8, STATS_FLAGS_PORT, "pfc_frames_sent" },
|
|
{ STATS_OFFSET32(brb_drop_hi),
|
|
8, STATS_FLAGS_PORT, "rx_brb_discard" },
|
|
{ STATS_OFFSET32(brb_truncate_hi),
|
|
8, STATS_FLAGS_PORT, "rx_brb_truncate" },
|
|
{ STATS_OFFSET32(pause_frames_received_hi),
|
|
8, STATS_FLAGS_PORT, "rx_pause_frames" },
|
|
{ STATS_OFFSET32(rx_stat_maccontrolframesreceived_hi),
|
|
8, STATS_FLAGS_PORT, "rx_mac_ctrl_frames" },
|
|
{ STATS_OFFSET32(nig_timer_max),
|
|
4, STATS_FLAGS_PORT, "rx_constant_pause_events" },
|
|
{ STATS_OFFSET32(total_bytes_transmitted_hi),
|
|
8, STATS_FLAGS_BOTH, "tx_bytes" },
|
|
{ STATS_OFFSET32(tx_stat_ifhcoutbadoctets_hi),
|
|
8, STATS_FLAGS_PORT, "tx_error_bytes" },
|
|
{ STATS_OFFSET32(total_unicast_packets_transmitted_hi),
|
|
8, STATS_FLAGS_BOTH, "tx_ucast_packets" },
|
|
{ STATS_OFFSET32(total_multicast_packets_transmitted_hi),
|
|
8, STATS_FLAGS_BOTH, "tx_mcast_packets" },
|
|
{ STATS_OFFSET32(total_broadcast_packets_transmitted_hi),
|
|
8, STATS_FLAGS_BOTH, "tx_bcast_packets" },
|
|
{ STATS_OFFSET32(tx_stat_dot3statsinternalmactransmiterrors_hi),
|
|
8, STATS_FLAGS_PORT, "tx_mac_errors" },
|
|
{ STATS_OFFSET32(rx_stat_dot3statscarriersenseerrors_hi),
|
|
8, STATS_FLAGS_PORT, "tx_carrier_errors" },
|
|
{ STATS_OFFSET32(tx_stat_dot3statssinglecollisionframes_hi),
|
|
8, STATS_FLAGS_PORT, "tx_single_collisions" },
|
|
{ STATS_OFFSET32(tx_stat_dot3statsmultiplecollisionframes_hi),
|
|
8, STATS_FLAGS_PORT, "tx_multi_collisions" },
|
|
{ STATS_OFFSET32(tx_stat_dot3statsdeferredtransmissions_hi),
|
|
8, STATS_FLAGS_PORT, "tx_deferred" },
|
|
{ STATS_OFFSET32(tx_stat_dot3statsexcessivecollisions_hi),
|
|
8, STATS_FLAGS_PORT, "tx_excess_collisions" },
|
|
{ STATS_OFFSET32(tx_stat_dot3statslatecollisions_hi),
|
|
8, STATS_FLAGS_PORT, "tx_late_collisions" },
|
|
{ STATS_OFFSET32(tx_stat_etherstatscollisions_hi),
|
|
8, STATS_FLAGS_PORT, "tx_total_collisions" },
|
|
{ STATS_OFFSET32(tx_stat_etherstatspkts64octets_hi),
|
|
8, STATS_FLAGS_PORT, "tx_64_byte_packets" },
|
|
{ STATS_OFFSET32(tx_stat_etherstatspkts65octetsto127octets_hi),
|
|
8, STATS_FLAGS_PORT, "tx_65_to_127_byte_packets" },
|
|
{ STATS_OFFSET32(tx_stat_etherstatspkts128octetsto255octets_hi),
|
|
8, STATS_FLAGS_PORT, "tx_128_to_255_byte_packets" },
|
|
{ STATS_OFFSET32(tx_stat_etherstatspkts256octetsto511octets_hi),
|
|
8, STATS_FLAGS_PORT, "tx_256_to_511_byte_packets" },
|
|
{ STATS_OFFSET32(tx_stat_etherstatspkts512octetsto1023octets_hi),
|
|
8, STATS_FLAGS_PORT, "tx_512_to_1023_byte_packets" },
|
|
{ STATS_OFFSET32(etherstatspkts1024octetsto1522octets_hi),
|
|
8, STATS_FLAGS_PORT, "tx_1024_to_1522_byte_packets" },
|
|
{ STATS_OFFSET32(etherstatspktsover1522octets_hi),
|
|
8, STATS_FLAGS_PORT, "tx_1523_to_9022_byte_packets" },
|
|
{ STATS_OFFSET32(pause_frames_sent_hi),
|
|
8, STATS_FLAGS_PORT, "tx_pause_frames" },
|
|
{ STATS_OFFSET32(total_tpa_aggregations_hi),
|
|
8, STATS_FLAGS_FUNC, "tpa_aggregations" },
|
|
{ STATS_OFFSET32(total_tpa_aggregated_frames_hi),
|
|
8, STATS_FLAGS_FUNC, "tpa_aggregated_frames"},
|
|
{ STATS_OFFSET32(total_tpa_bytes_hi),
|
|
8, STATS_FLAGS_FUNC, "tpa_bytes"},
|
|
#if 0
|
|
{ STATS_OFFSET32(recoverable_error),
|
|
4, STATS_FLAGS_FUNC, "recoverable_errors" },
|
|
{ STATS_OFFSET32(unrecoverable_error),
|
|
4, STATS_FLAGS_FUNC, "unrecoverable_errors" },
|
|
#endif
|
|
{ STATS_OFFSET32(eee_tx_lpi),
|
|
4, STATS_FLAGS_PORT, "eee_tx_lpi"},
|
|
{ STATS_OFFSET32(rx_calls),
|
|
4, STATS_FLAGS_FUNC, "rx_calls"},
|
|
{ STATS_OFFSET32(rx_pkts),
|
|
4, STATS_FLAGS_FUNC, "rx_pkts"},
|
|
{ STATS_OFFSET32(rx_tpa_pkts),
|
|
4, STATS_FLAGS_FUNC, "rx_tpa_pkts"},
|
|
{ STATS_OFFSET32(rx_soft_errors),
|
|
4, STATS_FLAGS_FUNC, "rx_soft_errors"},
|
|
{ STATS_OFFSET32(rx_hw_csum_errors),
|
|
4, STATS_FLAGS_FUNC, "rx_hw_csum_errors"},
|
|
{ STATS_OFFSET32(rx_ofld_frames_csum_ip),
|
|
4, STATS_FLAGS_FUNC, "rx_ofld_frames_csum_ip"},
|
|
{ STATS_OFFSET32(rx_ofld_frames_csum_tcp_udp),
|
|
4, STATS_FLAGS_FUNC, "rx_ofld_frames_csum_tcp_udp"},
|
|
{ STATS_OFFSET32(rx_budget_reached),
|
|
4, STATS_FLAGS_FUNC, "rx_budget_reached"},
|
|
{ STATS_OFFSET32(tx_pkts),
|
|
4, STATS_FLAGS_FUNC, "tx_pkts"},
|
|
{ STATS_OFFSET32(tx_soft_errors),
|
|
4, STATS_FLAGS_FUNC, "tx_soft_errors"},
|
|
{ STATS_OFFSET32(tx_ofld_frames_csum_ip),
|
|
4, STATS_FLAGS_FUNC, "tx_ofld_frames_csum_ip"},
|
|
{ STATS_OFFSET32(tx_ofld_frames_csum_tcp),
|
|
4, STATS_FLAGS_FUNC, "tx_ofld_frames_csum_tcp"},
|
|
{ STATS_OFFSET32(tx_ofld_frames_csum_udp),
|
|
4, STATS_FLAGS_FUNC, "tx_ofld_frames_csum_udp"},
|
|
{ STATS_OFFSET32(tx_ofld_frames_lso),
|
|
4, STATS_FLAGS_FUNC, "tx_ofld_frames_lso"},
|
|
{ STATS_OFFSET32(tx_ofld_frames_lso_hdr_splits),
|
|
4, STATS_FLAGS_FUNC, "tx_ofld_frames_lso_hdr_splits"},
|
|
{ STATS_OFFSET32(tx_encap_failures),
|
|
4, STATS_FLAGS_FUNC, "tx_encap_failures"},
|
|
{ STATS_OFFSET32(tx_hw_queue_full),
|
|
4, STATS_FLAGS_FUNC, "tx_hw_queue_full"},
|
|
{ STATS_OFFSET32(tx_hw_max_queue_depth),
|
|
4, STATS_FLAGS_FUNC, "tx_hw_max_queue_depth"},
|
|
{ STATS_OFFSET32(tx_dma_mapping_failure),
|
|
4, STATS_FLAGS_FUNC, "tx_dma_mapping_failure"},
|
|
{ STATS_OFFSET32(tx_max_drbr_queue_depth),
|
|
4, STATS_FLAGS_FUNC, "tx_max_drbr_queue_depth"},
|
|
{ STATS_OFFSET32(tx_window_violation_std),
|
|
4, STATS_FLAGS_FUNC, "tx_window_violation_std"},
|
|
{ STATS_OFFSET32(tx_window_violation_tso),
|
|
4, STATS_FLAGS_FUNC, "tx_window_violation_tso"},
|
|
#if 0
|
|
{ STATS_OFFSET32(tx_unsupported_tso_request_ipv6),
|
|
4, STATS_FLAGS_FUNC, "tx_unsupported_tso_request_ipv6"},
|
|
{ STATS_OFFSET32(tx_unsupported_tso_request_not_tcp),
|
|
4, STATS_FLAGS_FUNC, "tx_unsupported_tso_request_not_tcp"},
|
|
#endif
|
|
{ STATS_OFFSET32(tx_chain_lost_mbuf),
|
|
4, STATS_FLAGS_FUNC, "tx_chain_lost_mbuf"},
|
|
{ STATS_OFFSET32(tx_frames_deferred),
|
|
4, STATS_FLAGS_FUNC, "tx_frames_deferred"},
|
|
{ STATS_OFFSET32(tx_queue_xoff),
|
|
4, STATS_FLAGS_FUNC, "tx_queue_xoff"},
|
|
{ STATS_OFFSET32(mbuf_defrag_attempts),
|
|
4, STATS_FLAGS_FUNC, "mbuf_defrag_attempts"},
|
|
{ STATS_OFFSET32(mbuf_defrag_failures),
|
|
4, STATS_FLAGS_FUNC, "mbuf_defrag_failures"},
|
|
{ STATS_OFFSET32(mbuf_rx_bd_alloc_failed),
|
|
4, STATS_FLAGS_FUNC, "mbuf_rx_bd_alloc_failed"},
|
|
{ STATS_OFFSET32(mbuf_rx_bd_mapping_failed),
|
|
4, STATS_FLAGS_FUNC, "mbuf_rx_bd_mapping_failed"},
|
|
{ STATS_OFFSET32(mbuf_rx_tpa_alloc_failed),
|
|
4, STATS_FLAGS_FUNC, "mbuf_rx_tpa_alloc_failed"},
|
|
{ STATS_OFFSET32(mbuf_rx_tpa_mapping_failed),
|
|
4, STATS_FLAGS_FUNC, "mbuf_rx_tpa_mapping_failed"},
|
|
{ STATS_OFFSET32(mbuf_rx_sge_alloc_failed),
|
|
4, STATS_FLAGS_FUNC, "mbuf_rx_sge_alloc_failed"},
|
|
{ STATS_OFFSET32(mbuf_rx_sge_mapping_failed),
|
|
4, STATS_FLAGS_FUNC, "mbuf_rx_sge_mapping_failed"},
|
|
{ STATS_OFFSET32(mbuf_alloc_tx),
|
|
4, STATS_FLAGS_FUNC, "mbuf_alloc_tx"},
|
|
{ STATS_OFFSET32(mbuf_alloc_rx),
|
|
4, STATS_FLAGS_FUNC, "mbuf_alloc_rx"},
|
|
{ STATS_OFFSET32(mbuf_alloc_sge),
|
|
4, STATS_FLAGS_FUNC, "mbuf_alloc_sge"},
|
|
{ STATS_OFFSET32(mbuf_alloc_tpa),
|
|
4, STATS_FLAGS_FUNC, "mbuf_alloc_tpa"}
|
|
};
|
|
|
|
static const struct {
|
|
uint32_t offset;
|
|
uint32_t size;
|
|
char string[STAT_NAME_LEN];
|
|
} bxe_eth_q_stats_arr[] = {
|
|
{ Q_STATS_OFFSET32(total_bytes_received_hi),
|
|
8, "rx_bytes" },
|
|
{ Q_STATS_OFFSET32(total_unicast_packets_received_hi),
|
|
8, "rx_ucast_packets" },
|
|
{ Q_STATS_OFFSET32(total_multicast_packets_received_hi),
|
|
8, "rx_mcast_packets" },
|
|
{ Q_STATS_OFFSET32(total_broadcast_packets_received_hi),
|
|
8, "rx_bcast_packets" },
|
|
{ Q_STATS_OFFSET32(no_buff_discard_hi),
|
|
8, "rx_discards" },
|
|
{ Q_STATS_OFFSET32(total_bytes_transmitted_hi),
|
|
8, "tx_bytes" },
|
|
{ Q_STATS_OFFSET32(total_unicast_packets_transmitted_hi),
|
|
8, "tx_ucast_packets" },
|
|
{ Q_STATS_OFFSET32(total_multicast_packets_transmitted_hi),
|
|
8, "tx_mcast_packets" },
|
|
{ Q_STATS_OFFSET32(total_broadcast_packets_transmitted_hi),
|
|
8, "tx_bcast_packets" },
|
|
{ Q_STATS_OFFSET32(total_tpa_aggregations_hi),
|
|
8, "tpa_aggregations" },
|
|
{ Q_STATS_OFFSET32(total_tpa_aggregated_frames_hi),
|
|
8, "tpa_aggregated_frames"},
|
|
{ Q_STATS_OFFSET32(total_tpa_bytes_hi),
|
|
8, "tpa_bytes"},
|
|
{ Q_STATS_OFFSET32(rx_calls),
|
|
4, "rx_calls"},
|
|
{ Q_STATS_OFFSET32(rx_pkts),
|
|
4, "rx_pkts"},
|
|
{ Q_STATS_OFFSET32(rx_tpa_pkts),
|
|
4, "rx_tpa_pkts"},
|
|
{ Q_STATS_OFFSET32(rx_soft_errors),
|
|
4, "rx_soft_errors"},
|
|
{ Q_STATS_OFFSET32(rx_hw_csum_errors),
|
|
4, "rx_hw_csum_errors"},
|
|
{ Q_STATS_OFFSET32(rx_ofld_frames_csum_ip),
|
|
4, "rx_ofld_frames_csum_ip"},
|
|
{ Q_STATS_OFFSET32(rx_ofld_frames_csum_tcp_udp),
|
|
4, "rx_ofld_frames_csum_tcp_udp"},
|
|
{ Q_STATS_OFFSET32(rx_budget_reached),
|
|
4, "rx_budget_reached"},
|
|
{ Q_STATS_OFFSET32(tx_pkts),
|
|
4, "tx_pkts"},
|
|
{ Q_STATS_OFFSET32(tx_soft_errors),
|
|
4, "tx_soft_errors"},
|
|
{ Q_STATS_OFFSET32(tx_ofld_frames_csum_ip),
|
|
4, "tx_ofld_frames_csum_ip"},
|
|
{ Q_STATS_OFFSET32(tx_ofld_frames_csum_tcp),
|
|
4, "tx_ofld_frames_csum_tcp"},
|
|
{ Q_STATS_OFFSET32(tx_ofld_frames_csum_udp),
|
|
4, "tx_ofld_frames_csum_udp"},
|
|
{ Q_STATS_OFFSET32(tx_ofld_frames_lso),
|
|
4, "tx_ofld_frames_lso"},
|
|
{ Q_STATS_OFFSET32(tx_ofld_frames_lso_hdr_splits),
|
|
4, "tx_ofld_frames_lso_hdr_splits"},
|
|
{ Q_STATS_OFFSET32(tx_encap_failures),
|
|
4, "tx_encap_failures"},
|
|
{ Q_STATS_OFFSET32(tx_hw_queue_full),
|
|
4, "tx_hw_queue_full"},
|
|
{ Q_STATS_OFFSET32(tx_hw_max_queue_depth),
|
|
4, "tx_hw_max_queue_depth"},
|
|
{ Q_STATS_OFFSET32(tx_dma_mapping_failure),
|
|
4, "tx_dma_mapping_failure"},
|
|
{ Q_STATS_OFFSET32(tx_max_drbr_queue_depth),
|
|
4, "tx_max_drbr_queue_depth"},
|
|
{ Q_STATS_OFFSET32(tx_window_violation_std),
|
|
4, "tx_window_violation_std"},
|
|
{ Q_STATS_OFFSET32(tx_window_violation_tso),
|
|
4, "tx_window_violation_tso"},
|
|
#if 0
|
|
{ Q_STATS_OFFSET32(tx_unsupported_tso_request_ipv6),
|
|
4, "tx_unsupported_tso_request_ipv6"},
|
|
{ Q_STATS_OFFSET32(tx_unsupported_tso_request_not_tcp),
|
|
4, "tx_unsupported_tso_request_not_tcp"},
|
|
#endif
|
|
{ Q_STATS_OFFSET32(tx_chain_lost_mbuf),
|
|
4, "tx_chain_lost_mbuf"},
|
|
{ Q_STATS_OFFSET32(tx_frames_deferred),
|
|
4, "tx_frames_deferred"},
|
|
{ Q_STATS_OFFSET32(tx_queue_xoff),
|
|
4, "tx_queue_xoff"},
|
|
{ Q_STATS_OFFSET32(mbuf_defrag_attempts),
|
|
4, "mbuf_defrag_attempts"},
|
|
{ Q_STATS_OFFSET32(mbuf_defrag_failures),
|
|
4, "mbuf_defrag_failures"},
|
|
{ Q_STATS_OFFSET32(mbuf_rx_bd_alloc_failed),
|
|
4, "mbuf_rx_bd_alloc_failed"},
|
|
{ Q_STATS_OFFSET32(mbuf_rx_bd_mapping_failed),
|
|
4, "mbuf_rx_bd_mapping_failed"},
|
|
{ Q_STATS_OFFSET32(mbuf_rx_tpa_alloc_failed),
|
|
4, "mbuf_rx_tpa_alloc_failed"},
|
|
{ Q_STATS_OFFSET32(mbuf_rx_tpa_mapping_failed),
|
|
4, "mbuf_rx_tpa_mapping_failed"},
|
|
{ Q_STATS_OFFSET32(mbuf_rx_sge_alloc_failed),
|
|
4, "mbuf_rx_sge_alloc_failed"},
|
|
{ Q_STATS_OFFSET32(mbuf_rx_sge_mapping_failed),
|
|
4, "mbuf_rx_sge_mapping_failed"},
|
|
{ Q_STATS_OFFSET32(mbuf_alloc_tx),
|
|
4, "mbuf_alloc_tx"},
|
|
{ Q_STATS_OFFSET32(mbuf_alloc_rx),
|
|
4, "mbuf_alloc_rx"},
|
|
{ Q_STATS_OFFSET32(mbuf_alloc_sge),
|
|
4, "mbuf_alloc_sge"},
|
|
{ Q_STATS_OFFSET32(mbuf_alloc_tpa),
|
|
4, "mbuf_alloc_tpa"}
|
|
};
|
|
|
|
#define BXE_NUM_ETH_STATS ARRAY_SIZE(bxe_eth_stats_arr)
|
|
#define BXE_NUM_ETH_Q_STATS ARRAY_SIZE(bxe_eth_q_stats_arr)
|
|
|
|
|
|
static void bxe_cmng_fns_init(struct bxe_softc *sc,
|
|
uint8_t read_cfg,
|
|
uint8_t cmng_type);
|
|
static int bxe_get_cmng_fns_mode(struct bxe_softc *sc);
|
|
static void storm_memset_cmng(struct bxe_softc *sc,
|
|
struct cmng_init *cmng,
|
|
uint8_t port);
|
|
static void bxe_set_reset_global(struct bxe_softc *sc);
|
|
static void bxe_set_reset_in_progress(struct bxe_softc *sc);
|
|
static uint8_t bxe_reset_is_done(struct bxe_softc *sc,
|
|
int engine);
|
|
static uint8_t bxe_clear_pf_load(struct bxe_softc *sc);
|
|
static uint8_t bxe_chk_parity_attn(struct bxe_softc *sc,
|
|
uint8_t *global,
|
|
uint8_t print);
|
|
static void bxe_int_disable(struct bxe_softc *sc);
|
|
static int bxe_release_leader_lock(struct bxe_softc *sc);
|
|
static void bxe_pf_disable(struct bxe_softc *sc);
|
|
static void bxe_free_fp_buffers(struct bxe_softc *sc);
|
|
static inline void bxe_update_rx_prod(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp,
|
|
uint16_t rx_bd_prod,
|
|
uint16_t rx_cq_prod,
|
|
uint16_t rx_sge_prod);
|
|
static void bxe_link_report_locked(struct bxe_softc *sc);
|
|
static void bxe_link_report(struct bxe_softc *sc);
|
|
static void bxe_link_status_update(struct bxe_softc *sc);
|
|
static void bxe_periodic_callout_func(void *xsc);
|
|
static void bxe_periodic_start(struct bxe_softc *sc);
|
|
static void bxe_periodic_stop(struct bxe_softc *sc);
|
|
static int bxe_alloc_rx_bd_mbuf(struct bxe_fastpath *fp,
|
|
uint16_t prev_index,
|
|
uint16_t index);
|
|
static int bxe_alloc_rx_tpa_mbuf(struct bxe_fastpath *fp,
|
|
int queue);
|
|
static int bxe_alloc_rx_sge_mbuf(struct bxe_fastpath *fp,
|
|
uint16_t index);
|
|
static uint8_t bxe_txeof(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp);
|
|
static void bxe_task_fp(struct bxe_fastpath *fp);
|
|
static __noinline void bxe_dump_mbuf(struct bxe_softc *sc,
|
|
struct mbuf *m,
|
|
uint8_t contents);
|
|
static int bxe_alloc_mem(struct bxe_softc *sc);
|
|
static void bxe_free_mem(struct bxe_softc *sc);
|
|
static int bxe_alloc_fw_stats_mem(struct bxe_softc *sc);
|
|
static void bxe_free_fw_stats_mem(struct bxe_softc *sc);
|
|
static int bxe_interrupt_attach(struct bxe_softc *sc);
|
|
static void bxe_interrupt_detach(struct bxe_softc *sc);
|
|
static void bxe_set_rx_mode(struct bxe_softc *sc);
|
|
static int bxe_init_locked(struct bxe_softc *sc);
|
|
static int bxe_stop_locked(struct bxe_softc *sc);
|
|
static __noinline int bxe_nic_load(struct bxe_softc *sc,
|
|
int load_mode);
|
|
static __noinline int bxe_nic_unload(struct bxe_softc *sc,
|
|
uint32_t unload_mode,
|
|
uint8_t keep_link);
|
|
|
|
static void bxe_handle_sp_tq(void *context, int pending);
|
|
static void bxe_handle_rx_mode_tq(void *context, int pending);
|
|
static void bxe_handle_fp_tq(void *context, int pending);
|
|
|
|
|
|
/* calculate crc32 on a buffer (NOTE: crc32_length MUST be aligned to 8) */
|
|
uint32_t
|
|
calc_crc32(uint8_t *crc32_packet,
|
|
uint32_t crc32_length,
|
|
uint32_t crc32_seed,
|
|
uint8_t complement)
|
|
{
|
|
uint32_t byte = 0;
|
|
uint32_t bit = 0;
|
|
uint8_t msb = 0;
|
|
uint32_t temp = 0;
|
|
uint32_t shft = 0;
|
|
uint8_t current_byte = 0;
|
|
uint32_t crc32_result = crc32_seed;
|
|
const uint32_t CRC32_POLY = 0x1edc6f41;
|
|
|
|
if ((crc32_packet == NULL) ||
|
|
(crc32_length == 0) ||
|
|
((crc32_length % 8) != 0))
|
|
{
|
|
return (crc32_result);
|
|
}
|
|
|
|
for (byte = 0; byte < crc32_length; byte = byte + 1)
|
|
{
|
|
current_byte = crc32_packet[byte];
|
|
for (bit = 0; bit < 8; bit = bit + 1)
|
|
{
|
|
/* msb = crc32_result[31]; */
|
|
msb = (uint8_t)(crc32_result >> 31);
|
|
|
|
crc32_result = crc32_result << 1;
|
|
|
|
/* it (msb != current_byte[bit]) */
|
|
if (msb != (0x1 & (current_byte >> bit)))
|
|
{
|
|
crc32_result = crc32_result ^ CRC32_POLY;
|
|
/* crc32_result[0] = 1 */
|
|
crc32_result |= 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Last step is to:
|
|
* 1. "mirror" every bit
|
|
* 2. swap the 4 bytes
|
|
* 3. complement each bit
|
|
*/
|
|
|
|
/* Mirror */
|
|
temp = crc32_result;
|
|
shft = sizeof(crc32_result) * 8 - 1;
|
|
|
|
for (crc32_result >>= 1; crc32_result; crc32_result >>= 1)
|
|
{
|
|
temp <<= 1;
|
|
temp |= crc32_result & 1;
|
|
shft-- ;
|
|
}
|
|
|
|
/* temp[31-bit] = crc32_result[bit] */
|
|
temp <<= shft;
|
|
|
|
/* Swap */
|
|
/* crc32_result = {temp[7:0], temp[15:8], temp[23:16], temp[31:24]} */
|
|
{
|
|
uint32_t t0, t1, t2, t3;
|
|
t0 = (0x000000ff & (temp >> 24));
|
|
t1 = (0x0000ff00 & (temp >> 8));
|
|
t2 = (0x00ff0000 & (temp << 8));
|
|
t3 = (0xff000000 & (temp << 24));
|
|
crc32_result = t0 | t1 | t2 | t3;
|
|
}
|
|
|
|
/* Complement */
|
|
if (complement)
|
|
{
|
|
crc32_result = ~crc32_result;
|
|
}
|
|
|
|
return (crc32_result);
|
|
}
|
|
|
|
int
|
|
bxe_test_bit(int nr,
|
|
volatile unsigned long *addr)
|
|
{
|
|
return ((atomic_load_acq_long(addr) & (1 << nr)) != 0);
|
|
}
|
|
|
|
void
|
|
bxe_set_bit(unsigned int nr,
|
|
volatile unsigned long *addr)
|
|
{
|
|
atomic_set_acq_long(addr, (1 << nr));
|
|
}
|
|
|
|
void
|
|
bxe_clear_bit(int nr,
|
|
volatile unsigned long *addr)
|
|
{
|
|
atomic_clear_acq_long(addr, (1 << nr));
|
|
}
|
|
|
|
int
|
|
bxe_test_and_set_bit(int nr,
|
|
volatile unsigned long *addr)
|
|
{
|
|
unsigned long x;
|
|
nr = (1 << nr);
|
|
do {
|
|
x = *addr;
|
|
} while (atomic_cmpset_acq_long(addr, x, x | nr) == 0);
|
|
// if (x & nr) bit_was_set; else bit_was_not_set;
|
|
return (x & nr);
|
|
}
|
|
|
|
int
|
|
bxe_test_and_clear_bit(int nr,
|
|
volatile unsigned long *addr)
|
|
{
|
|
unsigned long x;
|
|
nr = (1 << nr);
|
|
do {
|
|
x = *addr;
|
|
} while (atomic_cmpset_acq_long(addr, x, x & ~nr) == 0);
|
|
// if (x & nr) bit_was_set; else bit_was_not_set;
|
|
return (x & nr);
|
|
}
|
|
|
|
int
|
|
bxe_cmpxchg(volatile int *addr,
|
|
int old,
|
|
int new)
|
|
{
|
|
int x;
|
|
do {
|
|
x = *addr;
|
|
} while (atomic_cmpset_acq_int(addr, old, new) == 0);
|
|
return (x);
|
|
}
|
|
|
|
/*
|
|
* Get DMA memory from the OS.
|
|
*
|
|
* Validates that the OS has provided DMA buffers in response to a
|
|
* bus_dmamap_load call and saves the physical address of those buffers.
|
|
* When the callback is used the OS will return 0 for the mapping function
|
|
* (bus_dmamap_load) so we use the value of map_arg->maxsegs to pass any
|
|
* failures back to the caller.
|
|
*
|
|
* Returns:
|
|
* Nothing.
|
|
*/
|
|
static void
|
|
bxe_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
|
{
|
|
struct bxe_dma *dma = arg;
|
|
|
|
if (error) {
|
|
dma->paddr = 0;
|
|
dma->nseg = 0;
|
|
BLOGE(dma->sc, "Failed DMA alloc '%s' (%d)!\n", dma->msg, error);
|
|
} else {
|
|
dma->paddr = segs->ds_addr;
|
|
dma->nseg = nseg;
|
|
#if 0
|
|
BLOGD(dma->sc, DBG_LOAD,
|
|
"DMA alloc '%s': vaddr=%p paddr=%p nseg=%d size=%lu\n",
|
|
dma->msg, dma->vaddr, (void *)dma->paddr,
|
|
dma->nseg, dma->size);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Allocate a block of memory and map it for DMA. No partial completions
|
|
* allowed and release any resources acquired if we can't acquire all
|
|
* resources.
|
|
*
|
|
* Returns:
|
|
* 0 = Success, !0 = Failure
|
|
*/
|
|
int
|
|
bxe_dma_alloc(struct bxe_softc *sc,
|
|
bus_size_t size,
|
|
struct bxe_dma *dma,
|
|
const char *msg)
|
|
{
|
|
int rc;
|
|
|
|
if (dma->size > 0) {
|
|
BLOGE(sc, "dma block '%s' already has size %lu\n", msg,
|
|
(unsigned long)dma->size);
|
|
return (1);
|
|
}
|
|
|
|
memset(dma, 0, sizeof(*dma)); /* sanity */
|
|
dma->sc = sc;
|
|
dma->size = size;
|
|
snprintf(dma->msg, sizeof(dma->msg), "%s", msg);
|
|
|
|
rc = bus_dma_tag_create(sc->parent_dma_tag, /* parent tag */
|
|
BCM_PAGE_SIZE, /* alignment */
|
|
0, /* boundary limit */
|
|
BUS_SPACE_MAXADDR, /* restricted low */
|
|
BUS_SPACE_MAXADDR, /* restricted hi */
|
|
NULL, /* addr filter() */
|
|
NULL, /* addr filter() arg */
|
|
size, /* max map size */
|
|
1, /* num discontinuous */
|
|
size, /* max seg size */
|
|
BUS_DMA_ALLOCNOW, /* flags */
|
|
NULL, /* lock() */
|
|
NULL, /* lock() arg */
|
|
&dma->tag); /* returned dma tag */
|
|
if (rc != 0) {
|
|
BLOGE(sc, "Failed to create dma tag for '%s' (%d)\n", msg, rc);
|
|
memset(dma, 0, sizeof(*dma));
|
|
return (1);
|
|
}
|
|
|
|
rc = bus_dmamem_alloc(dma->tag,
|
|
(void **)&dma->vaddr,
|
|
(BUS_DMA_NOWAIT | BUS_DMA_ZERO),
|
|
&dma->map);
|
|
if (rc != 0) {
|
|
BLOGE(sc, "Failed to alloc dma mem for '%s' (%d)\n", msg, rc);
|
|
bus_dma_tag_destroy(dma->tag);
|
|
memset(dma, 0, sizeof(*dma));
|
|
return (1);
|
|
}
|
|
|
|
rc = bus_dmamap_load(dma->tag,
|
|
dma->map,
|
|
dma->vaddr,
|
|
size,
|
|
bxe_dma_map_addr, /* BLOGD in here */
|
|
dma,
|
|
BUS_DMA_NOWAIT);
|
|
if (rc != 0) {
|
|
BLOGE(sc, "Failed to load dma map for '%s' (%d)\n", msg, rc);
|
|
bus_dmamem_free(dma->tag, dma->vaddr, dma->map);
|
|
bus_dma_tag_destroy(dma->tag);
|
|
memset(dma, 0, sizeof(*dma));
|
|
return (1);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
bxe_dma_free(struct bxe_softc *sc,
|
|
struct bxe_dma *dma)
|
|
{
|
|
if (dma->size > 0) {
|
|
#if 0
|
|
BLOGD(sc, DBG_LOAD,
|
|
"DMA free '%s': vaddr=%p paddr=%p nseg=%d size=%lu\n",
|
|
dma->msg, dma->vaddr, (void *)dma->paddr,
|
|
dma->nseg, dma->size);
|
|
#endif
|
|
|
|
DBASSERT(sc, (dma->tag != NULL), ("dma tag is NULL"));
|
|
|
|
bus_dmamap_sync(dma->tag, dma->map,
|
|
(BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE));
|
|
bus_dmamap_unload(dma->tag, dma->map);
|
|
bus_dmamem_free(dma->tag, dma->vaddr, dma->map);
|
|
bus_dma_tag_destroy(dma->tag);
|
|
}
|
|
|
|
memset(dma, 0, sizeof(*dma));
|
|
}
|
|
|
|
/*
|
|
* These indirect read and write routines are only during init.
|
|
* The locking is handled by the MCP.
|
|
*/
|
|
|
|
void
|
|
bxe_reg_wr_ind(struct bxe_softc *sc,
|
|
uint32_t addr,
|
|
uint32_t val)
|
|
{
|
|
pci_write_config(sc->dev, PCICFG_GRC_ADDRESS, addr, 4);
|
|
pci_write_config(sc->dev, PCICFG_GRC_DATA, val, 4);
|
|
pci_write_config(sc->dev, PCICFG_GRC_ADDRESS, 0, 4);
|
|
}
|
|
|
|
uint32_t
|
|
bxe_reg_rd_ind(struct bxe_softc *sc,
|
|
uint32_t addr)
|
|
{
|
|
uint32_t val;
|
|
|
|
pci_write_config(sc->dev, PCICFG_GRC_ADDRESS, addr, 4);
|
|
val = pci_read_config(sc->dev, PCICFG_GRC_DATA, 4);
|
|
pci_write_config(sc->dev, PCICFG_GRC_ADDRESS, 0, 4);
|
|
|
|
return (val);
|
|
}
|
|
|
|
#if 0
|
|
void bxe_dp_dmae(struct bxe_softc *sc, struct dmae_command *dmae, int msglvl)
|
|
{
|
|
uint32_t src_type = dmae->opcode & DMAE_COMMAND_SRC;
|
|
|
|
switch (dmae->opcode & DMAE_COMMAND_DST) {
|
|
case DMAE_CMD_DST_PCI:
|
|
if (src_type == DMAE_CMD_SRC_PCI)
|
|
DP(msglvl, "DMAE: opcode 0x%08x\n"
|
|
"src [%x:%08x], len [%d*4], dst [%x:%08x]\n"
|
|
"comp_addr [%x:%08x], comp_val 0x%08x\n",
|
|
dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
|
|
dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo,
|
|
dmae->comp_addr_hi, dmae->comp_addr_lo,
|
|
dmae->comp_val);
|
|
else
|
|
DP(msglvl, "DMAE: opcode 0x%08x\n"
|
|
"src [%08x], len [%d*4], dst [%x:%08x]\n"
|
|
"comp_addr [%x:%08x], comp_val 0x%08x\n",
|
|
dmae->opcode, dmae->src_addr_lo >> 2,
|
|
dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo,
|
|
dmae->comp_addr_hi, dmae->comp_addr_lo,
|
|
dmae->comp_val);
|
|
break;
|
|
case DMAE_CMD_DST_GRC:
|
|
if (src_type == DMAE_CMD_SRC_PCI)
|
|
DP(msglvl, "DMAE: opcode 0x%08x\n"
|
|
"src [%x:%08x], len [%d*4], dst_addr [%08x]\n"
|
|
"comp_addr [%x:%08x], comp_val 0x%08x\n",
|
|
dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
|
|
dmae->len, dmae->dst_addr_lo >> 2,
|
|
dmae->comp_addr_hi, dmae->comp_addr_lo,
|
|
dmae->comp_val);
|
|
else
|
|
DP(msglvl, "DMAE: opcode 0x%08x\n"
|
|
"src [%08x], len [%d*4], dst [%08x]\n"
|
|
"comp_addr [%x:%08x], comp_val 0x%08x\n",
|
|
dmae->opcode, dmae->src_addr_lo >> 2,
|
|
dmae->len, dmae->dst_addr_lo >> 2,
|
|
dmae->comp_addr_hi, dmae->comp_addr_lo,
|
|
dmae->comp_val);
|
|
break;
|
|
default:
|
|
if (src_type == DMAE_CMD_SRC_PCI)
|
|
DP(msglvl, "DMAE: opcode 0x%08x\n"
|
|
"src_addr [%x:%08x] len [%d * 4] dst_addr [none]\n"
|
|
"comp_addr [%x:%08x] comp_val 0x%08x\n",
|
|
dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
|
|
dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo,
|
|
dmae->comp_val);
|
|
else
|
|
DP(msglvl, "DMAE: opcode 0x%08x\n"
|
|
"src_addr [%08x] len [%d * 4] dst_addr [none]\n"
|
|
"comp_addr [%x:%08x] comp_val 0x%08x\n",
|
|
dmae->opcode, dmae->src_addr_lo >> 2,
|
|
dmae->len, dmae->comp_addr_hi, dmae->comp_addr_lo,
|
|
dmae->comp_val);
|
|
break;
|
|
}
|
|
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
bxe_acquire_hw_lock(struct bxe_softc *sc,
|
|
uint32_t resource)
|
|
{
|
|
uint32_t lock_status;
|
|
uint32_t resource_bit = (1 << resource);
|
|
int func = SC_FUNC(sc);
|
|
uint32_t hw_lock_control_reg;
|
|
int cnt;
|
|
|
|
/* validate the resource is within range */
|
|
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
|
|
BLOGE(sc, "resource 0x%x > HW_LOCK_MAX_RESOURCE_VALUE\n", resource);
|
|
return (-1);
|
|
}
|
|
|
|
if (func <= 5) {
|
|
hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + (func * 8));
|
|
} else {
|
|
hw_lock_control_reg =
|
|
(MISC_REG_DRIVER_CONTROL_7 + ((func - 6) * 8));
|
|
}
|
|
|
|
/* validate the resource is not already taken */
|
|
lock_status = REG_RD(sc, hw_lock_control_reg);
|
|
if (lock_status & resource_bit) {
|
|
BLOGE(sc, "resource in use (status 0x%x bit 0x%x)\n",
|
|
lock_status, resource_bit);
|
|
return (-1);
|
|
}
|
|
|
|
/* try every 5ms for 5 seconds */
|
|
for (cnt = 0; cnt < 1000; cnt++) {
|
|
REG_WR(sc, (hw_lock_control_reg + 4), resource_bit);
|
|
lock_status = REG_RD(sc, hw_lock_control_reg);
|
|
if (lock_status & resource_bit) {
|
|
return (0);
|
|
}
|
|
DELAY(5000);
|
|
}
|
|
|
|
BLOGE(sc, "Resource lock timeout!\n");
|
|
return (-1);
|
|
}
|
|
|
|
static int
|
|
bxe_release_hw_lock(struct bxe_softc *sc,
|
|
uint32_t resource)
|
|
{
|
|
uint32_t lock_status;
|
|
uint32_t resource_bit = (1 << resource);
|
|
int func = SC_FUNC(sc);
|
|
uint32_t hw_lock_control_reg;
|
|
|
|
/* validate the resource is within range */
|
|
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
|
|
BLOGE(sc, "resource 0x%x > HW_LOCK_MAX_RESOURCE_VALUE\n", resource);
|
|
return (-1);
|
|
}
|
|
|
|
if (func <= 5) {
|
|
hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + (func * 8));
|
|
} else {
|
|
hw_lock_control_reg =
|
|
(MISC_REG_DRIVER_CONTROL_7 + ((func - 6) * 8));
|
|
}
|
|
|
|
/* validate the resource is currently taken */
|
|
lock_status = REG_RD(sc, hw_lock_control_reg);
|
|
if (!(lock_status & resource_bit)) {
|
|
BLOGE(sc, "resource not in use (status 0x%x bit 0x%x)\n",
|
|
lock_status, resource_bit);
|
|
return (-1);
|
|
}
|
|
|
|
REG_WR(sc, hw_lock_control_reg, resource_bit);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Per pf misc lock must be acquired before the per port mcp lock. Otherwise,
|
|
* had we done things the other way around, if two pfs from the same port
|
|
* would attempt to access nvram at the same time, we could run into a
|
|
* scenario such as:
|
|
* pf A takes the port lock.
|
|
* pf B succeeds in taking the same lock since they are from the same port.
|
|
* pf A takes the per pf misc lock. Performs eeprom access.
|
|
* pf A finishes. Unlocks the per pf misc lock.
|
|
* Pf B takes the lock and proceeds to perform it's own access.
|
|
* pf A unlocks the per port lock, while pf B is still working (!).
|
|
* mcp takes the per port lock and corrupts pf B's access (and/or has it's own
|
|
* access corrupted by pf B).*
|
|
*/
|
|
static int
|
|
bxe_acquire_nvram_lock(struct bxe_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int count, i;
|
|
uint32_t val = 0;
|
|
|
|
/* acquire HW lock: protect against other PFs in PF Direct Assignment */
|
|
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_NVRAM);
|
|
|
|
/* adjust timeout for emulation/FPGA */
|
|
count = NVRAM_TIMEOUT_COUNT;
|
|
if (CHIP_REV_IS_SLOW(sc)) {
|
|
count *= 100;
|
|
}
|
|
|
|
/* request access to nvram interface */
|
|
REG_WR(sc, MCP_REG_MCPR_NVM_SW_ARB,
|
|
(MCPR_NVM_SW_ARB_ARB_REQ_SET1 << port));
|
|
|
|
for (i = 0; i < count*10; i++) {
|
|
val = REG_RD(sc, MCP_REG_MCPR_NVM_SW_ARB);
|
|
if (val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port)) {
|
|
break;
|
|
}
|
|
|
|
DELAY(5);
|
|
}
|
|
|
|
if (!(val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port))) {
|
|
BLOGE(sc, "Cannot get access to nvram interface\n");
|
|
return (-1);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bxe_release_nvram_lock(struct bxe_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int count, i;
|
|
uint32_t val = 0;
|
|
|
|
/* adjust timeout for emulation/FPGA */
|
|
count = NVRAM_TIMEOUT_COUNT;
|
|
if (CHIP_REV_IS_SLOW(sc)) {
|
|
count *= 100;
|
|
}
|
|
|
|
/* relinquish nvram interface */
|
|
REG_WR(sc, MCP_REG_MCPR_NVM_SW_ARB,
|
|
(MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << port));
|
|
|
|
for (i = 0; i < count*10; i++) {
|
|
val = REG_RD(sc, MCP_REG_MCPR_NVM_SW_ARB);
|
|
if (!(val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port))) {
|
|
break;
|
|
}
|
|
|
|
DELAY(5);
|
|
}
|
|
|
|
if (val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port)) {
|
|
BLOGE(sc, "Cannot free access to nvram interface\n");
|
|
return (-1);
|
|
}
|
|
|
|
/* release HW lock: protect against other PFs in PF Direct Assignment */
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_NVRAM);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bxe_enable_nvram_access(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
|
|
val = REG_RD(sc, MCP_REG_MCPR_NVM_ACCESS_ENABLE);
|
|
|
|
/* enable both bits, even on read */
|
|
REG_WR(sc, MCP_REG_MCPR_NVM_ACCESS_ENABLE,
|
|
(val | MCPR_NVM_ACCESS_ENABLE_EN | MCPR_NVM_ACCESS_ENABLE_WR_EN));
|
|
}
|
|
|
|
static void
|
|
bxe_disable_nvram_access(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
|
|
val = REG_RD(sc, MCP_REG_MCPR_NVM_ACCESS_ENABLE);
|
|
|
|
/* disable both bits, even after read */
|
|
REG_WR(sc, MCP_REG_MCPR_NVM_ACCESS_ENABLE,
|
|
(val & ~(MCPR_NVM_ACCESS_ENABLE_EN |
|
|
MCPR_NVM_ACCESS_ENABLE_WR_EN)));
|
|
}
|
|
|
|
static int
|
|
bxe_nvram_read_dword(struct bxe_softc *sc,
|
|
uint32_t offset,
|
|
uint32_t *ret_val,
|
|
uint32_t cmd_flags)
|
|
{
|
|
int count, i, rc;
|
|
uint32_t val;
|
|
|
|
/* build the command word */
|
|
cmd_flags |= MCPR_NVM_COMMAND_DOIT;
|
|
|
|
/* need to clear DONE bit separately */
|
|
REG_WR(sc, MCP_REG_MCPR_NVM_COMMAND, MCPR_NVM_COMMAND_DONE);
|
|
|
|
/* address of the NVRAM to read from */
|
|
REG_WR(sc, MCP_REG_MCPR_NVM_ADDR,
|
|
(offset & MCPR_NVM_ADDR_NVM_ADDR_VALUE));
|
|
|
|
/* issue a read command */
|
|
REG_WR(sc, MCP_REG_MCPR_NVM_COMMAND, cmd_flags);
|
|
|
|
/* adjust timeout for emulation/FPGA */
|
|
count = NVRAM_TIMEOUT_COUNT;
|
|
if (CHIP_REV_IS_SLOW(sc)) {
|
|
count *= 100;
|
|
}
|
|
|
|
/* wait for completion */
|
|
*ret_val = 0;
|
|
rc = -1;
|
|
for (i = 0; i < count; i++) {
|
|
DELAY(5);
|
|
val = REG_RD(sc, MCP_REG_MCPR_NVM_COMMAND);
|
|
|
|
if (val & MCPR_NVM_COMMAND_DONE) {
|
|
val = REG_RD(sc, MCP_REG_MCPR_NVM_READ);
|
|
/* we read nvram data in cpu order
|
|
* but ethtool sees it as an array of bytes
|
|
* converting to big-endian will do the work
|
|
*/
|
|
*ret_val = htobe32(val);
|
|
rc = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (rc == -1) {
|
|
BLOGE(sc, "nvram read timeout expired\n");
|
|
}
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static int
|
|
bxe_nvram_read(struct bxe_softc *sc,
|
|
uint32_t offset,
|
|
uint8_t *ret_buf,
|
|
int buf_size)
|
|
{
|
|
uint32_t cmd_flags;
|
|
uint32_t val;
|
|
int rc;
|
|
|
|
if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) {
|
|
BLOGE(sc, "Invalid parameter, offset 0x%x buf_size 0x%x\n",
|
|
offset, buf_size);
|
|
return (-1);
|
|
}
|
|
|
|
if ((offset + buf_size) > sc->devinfo.flash_size) {
|
|
BLOGE(sc, "Invalid parameter, "
|
|
"offset 0x%x + buf_size 0x%x > flash_size 0x%x\n",
|
|
offset, buf_size, sc->devinfo.flash_size);
|
|
return (-1);
|
|
}
|
|
|
|
/* request access to nvram interface */
|
|
rc = bxe_acquire_nvram_lock(sc);
|
|
if (rc) {
|
|
return (rc);
|
|
}
|
|
|
|
/* enable access to nvram interface */
|
|
bxe_enable_nvram_access(sc);
|
|
|
|
/* read the first word(s) */
|
|
cmd_flags = MCPR_NVM_COMMAND_FIRST;
|
|
while ((buf_size > sizeof(uint32_t)) && (rc == 0)) {
|
|
rc = bxe_nvram_read_dword(sc, offset, &val, cmd_flags);
|
|
memcpy(ret_buf, &val, 4);
|
|
|
|
/* advance to the next dword */
|
|
offset += sizeof(uint32_t);
|
|
ret_buf += sizeof(uint32_t);
|
|
buf_size -= sizeof(uint32_t);
|
|
cmd_flags = 0;
|
|
}
|
|
|
|
if (rc == 0) {
|
|
cmd_flags |= MCPR_NVM_COMMAND_LAST;
|
|
rc = bxe_nvram_read_dword(sc, offset, &val, cmd_flags);
|
|
memcpy(ret_buf, &val, 4);
|
|
}
|
|
|
|
/* disable access to nvram interface */
|
|
bxe_disable_nvram_access(sc);
|
|
bxe_release_nvram_lock(sc);
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static int
|
|
bxe_nvram_write_dword(struct bxe_softc *sc,
|
|
uint32_t offset,
|
|
uint32_t val,
|
|
uint32_t cmd_flags)
|
|
{
|
|
int count, i, rc;
|
|
|
|
/* build the command word */
|
|
cmd_flags |= (MCPR_NVM_COMMAND_DOIT | MCPR_NVM_COMMAND_WR);
|
|
|
|
/* need to clear DONE bit separately */
|
|
REG_WR(sc, MCP_REG_MCPR_NVM_COMMAND, MCPR_NVM_COMMAND_DONE);
|
|
|
|
/* write the data */
|
|
REG_WR(sc, MCP_REG_MCPR_NVM_WRITE, val);
|
|
|
|
/* address of the NVRAM to write to */
|
|
REG_WR(sc, MCP_REG_MCPR_NVM_ADDR,
|
|
(offset & MCPR_NVM_ADDR_NVM_ADDR_VALUE));
|
|
|
|
/* issue the write command */
|
|
REG_WR(sc, MCP_REG_MCPR_NVM_COMMAND, cmd_flags);
|
|
|
|
/* adjust timeout for emulation/FPGA */
|
|
count = NVRAM_TIMEOUT_COUNT;
|
|
if (CHIP_REV_IS_SLOW(sc)) {
|
|
count *= 100;
|
|
}
|
|
|
|
/* wait for completion */
|
|
rc = -1;
|
|
for (i = 0; i < count; i++) {
|
|
DELAY(5);
|
|
val = REG_RD(sc, MCP_REG_MCPR_NVM_COMMAND);
|
|
if (val & MCPR_NVM_COMMAND_DONE) {
|
|
rc = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (rc == -1) {
|
|
BLOGE(sc, "nvram write timeout expired\n");
|
|
}
|
|
|
|
return (rc);
|
|
}
|
|
|
|
#define BYTE_OFFSET(offset) (8 * (offset & 0x03))
|
|
|
|
static int
|
|
bxe_nvram_write1(struct bxe_softc *sc,
|
|
uint32_t offset,
|
|
uint8_t *data_buf,
|
|
int buf_size)
|
|
{
|
|
uint32_t cmd_flags;
|
|
uint32_t align_offset;
|
|
uint32_t val;
|
|
int rc;
|
|
|
|
if ((offset + buf_size) > sc->devinfo.flash_size) {
|
|
BLOGE(sc, "Invalid parameter, "
|
|
"offset 0x%x + buf_size 0x%x > flash_size 0x%x\n",
|
|
offset, buf_size, sc->devinfo.flash_size);
|
|
return (-1);
|
|
}
|
|
|
|
/* request access to nvram interface */
|
|
rc = bxe_acquire_nvram_lock(sc);
|
|
if (rc) {
|
|
return (rc);
|
|
}
|
|
|
|
/* enable access to nvram interface */
|
|
bxe_enable_nvram_access(sc);
|
|
|
|
cmd_flags = (MCPR_NVM_COMMAND_FIRST | MCPR_NVM_COMMAND_LAST);
|
|
align_offset = (offset & ~0x03);
|
|
rc = bxe_nvram_read_dword(sc, align_offset, &val, cmd_flags);
|
|
|
|
if (rc == 0) {
|
|
val &= ~(0xff << BYTE_OFFSET(offset));
|
|
val |= (*data_buf << BYTE_OFFSET(offset));
|
|
|
|
/* nvram data is returned as an array of bytes
|
|
* convert it back to cpu order
|
|
*/
|
|
val = be32toh(val);
|
|
|
|
rc = bxe_nvram_write_dword(sc, align_offset, val, cmd_flags);
|
|
}
|
|
|
|
/* disable access to nvram interface */
|
|
bxe_disable_nvram_access(sc);
|
|
bxe_release_nvram_lock(sc);
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static int
|
|
bxe_nvram_write(struct bxe_softc *sc,
|
|
uint32_t offset,
|
|
uint8_t *data_buf,
|
|
int buf_size)
|
|
{
|
|
uint32_t cmd_flags;
|
|
uint32_t val;
|
|
uint32_t written_so_far;
|
|
int rc;
|
|
|
|
if (buf_size == 1) {
|
|
return (bxe_nvram_write1(sc, offset, data_buf, buf_size));
|
|
}
|
|
|
|
if ((offset & 0x03) || (buf_size & 0x03) /* || (buf_size == 0) */) {
|
|
BLOGE(sc, "Invalid parameter, offset 0x%x buf_size 0x%x\n",
|
|
offset, buf_size);
|
|
return (-1);
|
|
}
|
|
|
|
if (buf_size == 0) {
|
|
return (0); /* nothing to do */
|
|
}
|
|
|
|
if ((offset + buf_size) > sc->devinfo.flash_size) {
|
|
BLOGE(sc, "Invalid parameter, "
|
|
"offset 0x%x + buf_size 0x%x > flash_size 0x%x\n",
|
|
offset, buf_size, sc->devinfo.flash_size);
|
|
return (-1);
|
|
}
|
|
|
|
/* request access to nvram interface */
|
|
rc = bxe_acquire_nvram_lock(sc);
|
|
if (rc) {
|
|
return (rc);
|
|
}
|
|
|
|
/* enable access to nvram interface */
|
|
bxe_enable_nvram_access(sc);
|
|
|
|
written_so_far = 0;
|
|
cmd_flags = MCPR_NVM_COMMAND_FIRST;
|
|
while ((written_so_far < buf_size) && (rc == 0)) {
|
|
if (written_so_far == (buf_size - sizeof(uint32_t))) {
|
|
cmd_flags |= MCPR_NVM_COMMAND_LAST;
|
|
} else if (((offset + 4) % NVRAM_PAGE_SIZE) == 0) {
|
|
cmd_flags |= MCPR_NVM_COMMAND_LAST;
|
|
} else if ((offset % NVRAM_PAGE_SIZE) == 0) {
|
|
cmd_flags |= MCPR_NVM_COMMAND_FIRST;
|
|
}
|
|
|
|
memcpy(&val, data_buf, 4);
|
|
|
|
rc = bxe_nvram_write_dword(sc, offset, val, cmd_flags);
|
|
|
|
/* advance to the next dword */
|
|
offset += sizeof(uint32_t);
|
|
data_buf += sizeof(uint32_t);
|
|
written_so_far += sizeof(uint32_t);
|
|
cmd_flags = 0;
|
|
}
|
|
|
|
/* disable access to nvram interface */
|
|
bxe_disable_nvram_access(sc);
|
|
bxe_release_nvram_lock(sc);
|
|
|
|
return (rc);
|
|
}
|
|
|
|
/* copy command into DMAE command memory and set DMAE command Go */
|
|
void
|
|
bxe_post_dmae(struct bxe_softc *sc,
|
|
struct dmae_command *dmae,
|
|
int idx)
|
|
{
|
|
uint32_t cmd_offset;
|
|
int i;
|
|
|
|
cmd_offset = (DMAE_REG_CMD_MEM + (sizeof(struct dmae_command) * idx));
|
|
for (i = 0; i < ((sizeof(struct dmae_command) / 4)); i++) {
|
|
REG_WR(sc, (cmd_offset + (i * 4)), *(((uint32_t *)dmae) + i));
|
|
}
|
|
|
|
REG_WR(sc, dmae_reg_go_c[idx], 1);
|
|
}
|
|
|
|
uint32_t
|
|
bxe_dmae_opcode_add_comp(uint32_t opcode,
|
|
uint8_t comp_type)
|
|
{
|
|
return (opcode | ((comp_type << DMAE_COMMAND_C_DST_SHIFT) |
|
|
DMAE_COMMAND_C_TYPE_ENABLE));
|
|
}
|
|
|
|
uint32_t
|
|
bxe_dmae_opcode_clr_src_reset(uint32_t opcode)
|
|
{
|
|
return (opcode & ~DMAE_COMMAND_SRC_RESET);
|
|
}
|
|
|
|
uint32_t
|
|
bxe_dmae_opcode(struct bxe_softc *sc,
|
|
uint8_t src_type,
|
|
uint8_t dst_type,
|
|
uint8_t with_comp,
|
|
uint8_t comp_type)
|
|
{
|
|
uint32_t opcode = 0;
|
|
|
|
opcode |= ((src_type << DMAE_COMMAND_SRC_SHIFT) |
|
|
(dst_type << DMAE_COMMAND_DST_SHIFT));
|
|
|
|
opcode |= (DMAE_COMMAND_SRC_RESET | DMAE_COMMAND_DST_RESET);
|
|
|
|
opcode |= (SC_PORT(sc) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0);
|
|
|
|
opcode |= ((SC_VN(sc) << DMAE_COMMAND_E1HVN_SHIFT) |
|
|
(SC_VN(sc) << DMAE_COMMAND_DST_VN_SHIFT));
|
|
|
|
opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT);
|
|
|
|
#ifdef __BIG_ENDIAN
|
|
opcode |= DMAE_CMD_ENDIANITY_B_DW_SWAP;
|
|
#else
|
|
opcode |= DMAE_CMD_ENDIANITY_DW_SWAP;
|
|
#endif
|
|
|
|
if (with_comp) {
|
|
opcode = bxe_dmae_opcode_add_comp(opcode, comp_type);
|
|
}
|
|
|
|
return (opcode);
|
|
}
|
|
|
|
static void
|
|
bxe_prep_dmae_with_comp(struct bxe_softc *sc,
|
|
struct dmae_command *dmae,
|
|
uint8_t src_type,
|
|
uint8_t dst_type)
|
|
{
|
|
memset(dmae, 0, sizeof(struct dmae_command));
|
|
|
|
/* set the opcode */
|
|
dmae->opcode = bxe_dmae_opcode(sc, src_type, dst_type,
|
|
TRUE, DMAE_COMP_PCI);
|
|
|
|
/* fill in the completion parameters */
|
|
dmae->comp_addr_lo = U64_LO(BXE_SP_MAPPING(sc, wb_comp));
|
|
dmae->comp_addr_hi = U64_HI(BXE_SP_MAPPING(sc, wb_comp));
|
|
dmae->comp_val = DMAE_COMP_VAL;
|
|
}
|
|
|
|
/* issue a DMAE command over the init channel and wait for completion */
|
|
static int
|
|
bxe_issue_dmae_with_comp(struct bxe_softc *sc,
|
|
struct dmae_command *dmae)
|
|
{
|
|
uint32_t *wb_comp = BXE_SP(sc, wb_comp);
|
|
int timeout = CHIP_REV_IS_SLOW(sc) ? 400000 : 4000;
|
|
|
|
BXE_DMAE_LOCK(sc);
|
|
|
|
/* reset completion */
|
|
*wb_comp = 0;
|
|
|
|
/* post the command on the channel used for initializations */
|
|
bxe_post_dmae(sc, dmae, INIT_DMAE_C(sc));
|
|
|
|
/* wait for completion */
|
|
DELAY(5);
|
|
|
|
while ((*wb_comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) {
|
|
if (!timeout ||
|
|
(sc->recovery_state != BXE_RECOVERY_DONE &&
|
|
sc->recovery_state != BXE_RECOVERY_NIC_LOADING)) {
|
|
BLOGE(sc, "DMAE timeout!\n");
|
|
BXE_DMAE_UNLOCK(sc);
|
|
return (DMAE_TIMEOUT);
|
|
}
|
|
|
|
timeout--;
|
|
DELAY(50);
|
|
}
|
|
|
|
if (*wb_comp & DMAE_PCI_ERR_FLAG) {
|
|
BLOGE(sc, "DMAE PCI error!\n");
|
|
BXE_DMAE_UNLOCK(sc);
|
|
return (DMAE_PCI_ERROR);
|
|
}
|
|
|
|
BXE_DMAE_UNLOCK(sc);
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
bxe_read_dmae(struct bxe_softc *sc,
|
|
uint32_t src_addr,
|
|
uint32_t len32)
|
|
{
|
|
struct dmae_command dmae;
|
|
uint32_t *data;
|
|
int i, rc;
|
|
|
|
DBASSERT(sc, (len32 <= 4), ("DMAE read length is %d", len32));
|
|
|
|
if (!sc->dmae_ready) {
|
|
data = BXE_SP(sc, wb_data[0]);
|
|
|
|
for (i = 0; i < len32; i++) {
|
|
data[i] = (CHIP_IS_E1(sc)) ?
|
|
bxe_reg_rd_ind(sc, (src_addr + (i * 4))) :
|
|
REG_RD(sc, (src_addr + (i * 4)));
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/* set opcode and fixed command fields */
|
|
bxe_prep_dmae_with_comp(sc, &dmae, DMAE_SRC_GRC, DMAE_DST_PCI);
|
|
|
|
/* fill in addresses and len */
|
|
dmae.src_addr_lo = (src_addr >> 2); /* GRC addr has dword resolution */
|
|
dmae.src_addr_hi = 0;
|
|
dmae.dst_addr_lo = U64_LO(BXE_SP_MAPPING(sc, wb_data));
|
|
dmae.dst_addr_hi = U64_HI(BXE_SP_MAPPING(sc, wb_data));
|
|
dmae.len = len32;
|
|
|
|
/* issue the command and wait for completion */
|
|
if ((rc = bxe_issue_dmae_with_comp(sc, &dmae)) != 0) {
|
|
bxe_panic(sc, ("DMAE failed (%d)\n", rc));
|
|
};
|
|
}
|
|
|
|
void
|
|
bxe_write_dmae(struct bxe_softc *sc,
|
|
bus_addr_t dma_addr,
|
|
uint32_t dst_addr,
|
|
uint32_t len32)
|
|
{
|
|
struct dmae_command dmae;
|
|
int rc;
|
|
|
|
if (!sc->dmae_ready) {
|
|
DBASSERT(sc, (len32 <= 4), ("DMAE not ready and length is %d", len32));
|
|
|
|
if (CHIP_IS_E1(sc)) {
|
|
ecore_init_ind_wr(sc, dst_addr, BXE_SP(sc, wb_data[0]), len32);
|
|
} else {
|
|
ecore_init_str_wr(sc, dst_addr, BXE_SP(sc, wb_data[0]), len32);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/* set opcode and fixed command fields */
|
|
bxe_prep_dmae_with_comp(sc, &dmae, DMAE_SRC_PCI, DMAE_DST_GRC);
|
|
|
|
/* fill in addresses and len */
|
|
dmae.src_addr_lo = U64_LO(dma_addr);
|
|
dmae.src_addr_hi = U64_HI(dma_addr);
|
|
dmae.dst_addr_lo = (dst_addr >> 2); /* GRC addr has dword resolution */
|
|
dmae.dst_addr_hi = 0;
|
|
dmae.len = len32;
|
|
|
|
/* issue the command and wait for completion */
|
|
if ((rc = bxe_issue_dmae_with_comp(sc, &dmae)) != 0) {
|
|
bxe_panic(sc, ("DMAE failed (%d)\n", rc));
|
|
}
|
|
}
|
|
|
|
void
|
|
bxe_write_dmae_phys_len(struct bxe_softc *sc,
|
|
bus_addr_t phys_addr,
|
|
uint32_t addr,
|
|
uint32_t len)
|
|
{
|
|
int dmae_wr_max = DMAE_LEN32_WR_MAX(sc);
|
|
int offset = 0;
|
|
|
|
while (len > dmae_wr_max) {
|
|
bxe_write_dmae(sc,
|
|
(phys_addr + offset), /* src DMA address */
|
|
(addr + offset), /* dst GRC address */
|
|
dmae_wr_max);
|
|
offset += (dmae_wr_max * 4);
|
|
len -= dmae_wr_max;
|
|
}
|
|
|
|
bxe_write_dmae(sc,
|
|
(phys_addr + offset), /* src DMA address */
|
|
(addr + offset), /* dst GRC address */
|
|
len);
|
|
}
|
|
|
|
void
|
|
bxe_set_ctx_validation(struct bxe_softc *sc,
|
|
struct eth_context *cxt,
|
|
uint32_t cid)
|
|
{
|
|
/* ustorm cxt validation */
|
|
cxt->ustorm_ag_context.cdu_usage =
|
|
CDU_RSRVD_VALUE_TYPE_A(HW_CID(sc, cid),
|
|
CDU_REGION_NUMBER_UCM_AG, ETH_CONNECTION_TYPE);
|
|
/* xcontext validation */
|
|
cxt->xstorm_ag_context.cdu_reserved =
|
|
CDU_RSRVD_VALUE_TYPE_A(HW_CID(sc, cid),
|
|
CDU_REGION_NUMBER_XCM_AG, ETH_CONNECTION_TYPE);
|
|
}
|
|
|
|
static void
|
|
bxe_storm_memset_hc_timeout(struct bxe_softc *sc,
|
|
uint8_t port,
|
|
uint8_t fw_sb_id,
|
|
uint8_t sb_index,
|
|
uint8_t ticks)
|
|
{
|
|
uint32_t addr =
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_STATUS_BLOCK_DATA_TIMEOUT_OFFSET(fw_sb_id, sb_index));
|
|
|
|
REG_WR8(sc, addr, ticks);
|
|
|
|
BLOGD(sc, DBG_LOAD,
|
|
"port %d fw_sb_id %d sb_index %d ticks %d\n",
|
|
port, fw_sb_id, sb_index, ticks);
|
|
}
|
|
|
|
static void
|
|
bxe_storm_memset_hc_disable(struct bxe_softc *sc,
|
|
uint8_t port,
|
|
uint16_t fw_sb_id,
|
|
uint8_t sb_index,
|
|
uint8_t disable)
|
|
{
|
|
uint32_t enable_flag =
|
|
(disable) ? 0 : (1 << HC_INDEX_DATA_HC_ENABLED_SHIFT);
|
|
uint32_t addr =
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_STATUS_BLOCK_DATA_FLAGS_OFFSET(fw_sb_id, sb_index));
|
|
uint8_t flags;
|
|
|
|
/* clear and set */
|
|
flags = REG_RD8(sc, addr);
|
|
flags &= ~HC_INDEX_DATA_HC_ENABLED;
|
|
flags |= enable_flag;
|
|
REG_WR8(sc, addr, flags);
|
|
|
|
BLOGD(sc, DBG_LOAD,
|
|
"port %d fw_sb_id %d sb_index %d disable %d\n",
|
|
port, fw_sb_id, sb_index, disable);
|
|
}
|
|
|
|
void
|
|
bxe_update_coalesce_sb_index(struct bxe_softc *sc,
|
|
uint8_t fw_sb_id,
|
|
uint8_t sb_index,
|
|
uint8_t disable,
|
|
uint16_t usec)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint8_t ticks = (usec / 4); /* XXX ??? */
|
|
|
|
bxe_storm_memset_hc_timeout(sc, port, fw_sb_id, sb_index, ticks);
|
|
|
|
disable = (disable) ? 1 : ((usec) ? 0 : 1);
|
|
bxe_storm_memset_hc_disable(sc, port, fw_sb_id, sb_index, disable);
|
|
}
|
|
|
|
void
|
|
elink_cb_udelay(struct bxe_softc *sc,
|
|
uint32_t usecs)
|
|
{
|
|
DELAY(usecs);
|
|
}
|
|
|
|
uint32_t
|
|
elink_cb_reg_read(struct bxe_softc *sc,
|
|
uint32_t reg_addr)
|
|
{
|
|
return (REG_RD(sc, reg_addr));
|
|
}
|
|
|
|
void
|
|
elink_cb_reg_write(struct bxe_softc *sc,
|
|
uint32_t reg_addr,
|
|
uint32_t val)
|
|
{
|
|
REG_WR(sc, reg_addr, val);
|
|
}
|
|
|
|
void
|
|
elink_cb_reg_wb_write(struct bxe_softc *sc,
|
|
uint32_t offset,
|
|
uint32_t *wb_write,
|
|
uint16_t len)
|
|
{
|
|
REG_WR_DMAE(sc, offset, wb_write, len);
|
|
}
|
|
|
|
void
|
|
elink_cb_reg_wb_read(struct bxe_softc *sc,
|
|
uint32_t offset,
|
|
uint32_t *wb_write,
|
|
uint16_t len)
|
|
{
|
|
REG_RD_DMAE(sc, offset, wb_write, len);
|
|
}
|
|
|
|
uint8_t
|
|
elink_cb_path_id(struct bxe_softc *sc)
|
|
{
|
|
return (SC_PATH(sc));
|
|
}
|
|
|
|
void
|
|
elink_cb_event_log(struct bxe_softc *sc,
|
|
const elink_log_id_t elink_log_id,
|
|
...)
|
|
{
|
|
/* XXX */
|
|
#if 0
|
|
//va_list ap;
|
|
va_start(ap, elink_log_id);
|
|
_XXX_(sc, lm_log_id, ap);
|
|
va_end(ap);
|
|
#endif
|
|
BLOGI(sc, "ELINK EVENT LOG (%d)\n", elink_log_id);
|
|
}
|
|
|
|
static int
|
|
bxe_set_spio(struct bxe_softc *sc,
|
|
int spio,
|
|
uint32_t mode)
|
|
{
|
|
uint32_t spio_reg;
|
|
|
|
/* Only 2 SPIOs are configurable */
|
|
if ((spio != MISC_SPIO_SPIO4) && (spio != MISC_SPIO_SPIO5)) {
|
|
BLOGE(sc, "Invalid SPIO 0x%x\n", spio);
|
|
return (-1);
|
|
}
|
|
|
|
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_SPIO);
|
|
|
|
/* read SPIO and mask except the float bits */
|
|
spio_reg = (REG_RD(sc, MISC_REG_SPIO) & MISC_SPIO_FLOAT);
|
|
|
|
switch (mode) {
|
|
case MISC_SPIO_OUTPUT_LOW:
|
|
BLOGD(sc, DBG_LOAD, "Set SPIO 0x%x -> output low\n", spio);
|
|
/* clear FLOAT and set CLR */
|
|
spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
|
|
spio_reg |= (spio << MISC_SPIO_CLR_POS);
|
|
break;
|
|
|
|
case MISC_SPIO_OUTPUT_HIGH:
|
|
BLOGD(sc, DBG_LOAD, "Set SPIO 0x%x -> output high\n", spio);
|
|
/* clear FLOAT and set SET */
|
|
spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
|
|
spio_reg |= (spio << MISC_SPIO_SET_POS);
|
|
break;
|
|
|
|
case MISC_SPIO_INPUT_HI_Z:
|
|
BLOGD(sc, DBG_LOAD, "Set SPIO 0x%x -> input\n", spio);
|
|
/* set FLOAT */
|
|
spio_reg |= (spio << MISC_SPIO_FLOAT_POS);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
REG_WR(sc, MISC_REG_SPIO, spio_reg);
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_SPIO);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bxe_gpio_read(struct bxe_softc *sc,
|
|
int gpio_num,
|
|
uint8_t port)
|
|
{
|
|
/* The GPIO should be swapped if swap register is set and active */
|
|
int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
|
|
REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
|
|
int gpio_shift = (gpio_num +
|
|
(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0));
|
|
uint32_t gpio_mask = (1 << gpio_shift);
|
|
uint32_t gpio_reg;
|
|
|
|
if (gpio_num > MISC_REGISTERS_GPIO_3) {
|
|
BLOGE(sc, "Invalid GPIO %d\n", gpio_num);
|
|
return (-1);
|
|
}
|
|
|
|
/* read GPIO value */
|
|
gpio_reg = REG_RD(sc, MISC_REG_GPIO);
|
|
|
|
/* get the requested pin value */
|
|
return ((gpio_reg & gpio_mask) == gpio_mask) ? 1 : 0;
|
|
}
|
|
|
|
static int
|
|
bxe_gpio_write(struct bxe_softc *sc,
|
|
int gpio_num,
|
|
uint32_t mode,
|
|
uint8_t port)
|
|
{
|
|
/* The GPIO should be swapped if swap register is set and active */
|
|
int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
|
|
REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
|
|
int gpio_shift = (gpio_num +
|
|
(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0));
|
|
uint32_t gpio_mask = (1 << gpio_shift);
|
|
uint32_t gpio_reg;
|
|
|
|
if (gpio_num > MISC_REGISTERS_GPIO_3) {
|
|
BLOGE(sc, "Invalid GPIO %d\n", gpio_num);
|
|
return (-1);
|
|
}
|
|
|
|
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
/* read GPIO and mask except the float bits */
|
|
gpio_reg = (REG_RD(sc, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
|
|
|
|
switch (mode) {
|
|
case MISC_REGISTERS_GPIO_OUTPUT_LOW:
|
|
BLOGD(sc, DBG_PHY,
|
|
"Set GPIO %d (shift %d) -> output low\n",
|
|
gpio_num, gpio_shift);
|
|
/* clear FLOAT and set CLR */
|
|
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
|
|
BLOGD(sc, DBG_PHY,
|
|
"Set GPIO %d (shift %d) -> output high\n",
|
|
gpio_num, gpio_shift);
|
|
/* clear FLOAT and set SET */
|
|
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_INPUT_HI_Z:
|
|
BLOGD(sc, DBG_PHY,
|
|
"Set GPIO %d (shift %d) -> input\n",
|
|
gpio_num, gpio_shift);
|
|
/* set FLOAT */
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
REG_WR(sc, MISC_REG_GPIO, gpio_reg);
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bxe_gpio_mult_write(struct bxe_softc *sc,
|
|
uint8_t pins,
|
|
uint32_t mode)
|
|
{
|
|
uint32_t gpio_reg;
|
|
|
|
/* any port swapping should be handled by caller */
|
|
|
|
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
/* read GPIO and mask except the float bits */
|
|
gpio_reg = REG_RD(sc, MISC_REG_GPIO);
|
|
gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_CLR_POS);
|
|
gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_SET_POS);
|
|
|
|
switch (mode) {
|
|
case MISC_REGISTERS_GPIO_OUTPUT_LOW:
|
|
BLOGD(sc, DBG_PHY, "Set GPIO 0x%x -> output low\n", pins);
|
|
/* set CLR */
|
|
gpio_reg |= (pins << MISC_REGISTERS_GPIO_CLR_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
|
|
BLOGD(sc, DBG_PHY, "Set GPIO 0x%x -> output high\n", pins);
|
|
/* set SET */
|
|
gpio_reg |= (pins << MISC_REGISTERS_GPIO_SET_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_INPUT_HI_Z:
|
|
BLOGD(sc, DBG_PHY, "Set GPIO 0x%x -> input\n", pins);
|
|
/* set FLOAT */
|
|
gpio_reg |= (pins << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
break;
|
|
|
|
default:
|
|
BLOGE(sc, "Invalid GPIO mode assignment %d\n", mode);
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
return (-1);
|
|
}
|
|
|
|
REG_WR(sc, MISC_REG_GPIO, gpio_reg);
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bxe_gpio_int_write(struct bxe_softc *sc,
|
|
int gpio_num,
|
|
uint32_t mode,
|
|
uint8_t port)
|
|
{
|
|
/* The GPIO should be swapped if swap register is set and active */
|
|
int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
|
|
REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
|
|
int gpio_shift = (gpio_num +
|
|
(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0));
|
|
uint32_t gpio_mask = (1 << gpio_shift);
|
|
uint32_t gpio_reg;
|
|
|
|
if (gpio_num > MISC_REGISTERS_GPIO_3) {
|
|
BLOGE(sc, "Invalid GPIO %d\n", gpio_num);
|
|
return (-1);
|
|
}
|
|
|
|
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
/* read GPIO int */
|
|
gpio_reg = REG_RD(sc, MISC_REG_GPIO_INT);
|
|
|
|
switch (mode) {
|
|
case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR:
|
|
BLOGD(sc, DBG_PHY,
|
|
"Clear GPIO INT %d (shift %d) -> output low\n",
|
|
gpio_num, gpio_shift);
|
|
/* clear SET and set CLR */
|
|
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_INT_OUTPUT_SET:
|
|
BLOGD(sc, DBG_PHY,
|
|
"Set GPIO INT %d (shift %d) -> output high\n",
|
|
gpio_num, gpio_shift);
|
|
/* clear CLR and set SET */
|
|
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
REG_WR(sc, MISC_REG_GPIO_INT, gpio_reg);
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
return (0);
|
|
}
|
|
|
|
uint32_t
|
|
elink_cb_gpio_read(struct bxe_softc *sc,
|
|
uint16_t gpio_num,
|
|
uint8_t port)
|
|
{
|
|
return (bxe_gpio_read(sc, gpio_num, port));
|
|
}
|
|
|
|
uint8_t
|
|
elink_cb_gpio_write(struct bxe_softc *sc,
|
|
uint16_t gpio_num,
|
|
uint8_t mode, /* 0=low 1=high */
|
|
uint8_t port)
|
|
{
|
|
return (bxe_gpio_write(sc, gpio_num, mode, port));
|
|
}
|
|
|
|
uint8_t
|
|
elink_cb_gpio_mult_write(struct bxe_softc *sc,
|
|
uint8_t pins,
|
|
uint8_t mode) /* 0=low 1=high */
|
|
{
|
|
return (bxe_gpio_mult_write(sc, pins, mode));
|
|
}
|
|
|
|
uint8_t
|
|
elink_cb_gpio_int_write(struct bxe_softc *sc,
|
|
uint16_t gpio_num,
|
|
uint8_t mode, /* 0=low 1=high */
|
|
uint8_t port)
|
|
{
|
|
return (bxe_gpio_int_write(sc, gpio_num, mode, port));
|
|
}
|
|
|
|
void
|
|
elink_cb_notify_link_changed(struct bxe_softc *sc)
|
|
{
|
|
REG_WR(sc, (MISC_REG_AEU_GENERAL_ATTN_12 +
|
|
(SC_FUNC(sc) * sizeof(uint32_t))), 1);
|
|
}
|
|
|
|
/* send the MCP a request, block until there is a reply */
|
|
uint32_t
|
|
elink_cb_fw_command(struct bxe_softc *sc,
|
|
uint32_t command,
|
|
uint32_t param)
|
|
{
|
|
int mb_idx = SC_FW_MB_IDX(sc);
|
|
uint32_t seq;
|
|
uint32_t rc = 0;
|
|
uint32_t cnt = 1;
|
|
uint8_t delay = CHIP_REV_IS_SLOW(sc) ? 100 : 10;
|
|
|
|
BXE_FWMB_LOCK(sc);
|
|
|
|
seq = ++sc->fw_seq;
|
|
SHMEM_WR(sc, func_mb[mb_idx].drv_mb_param, param);
|
|
SHMEM_WR(sc, func_mb[mb_idx].drv_mb_header, (command | seq));
|
|
|
|
BLOGD(sc, DBG_PHY,
|
|
"wrote command 0x%08x to FW MB param 0x%08x\n",
|
|
(command | seq), param);
|
|
|
|
/* Let the FW do it's magic. GIve it up to 5 seconds... */
|
|
do {
|
|
DELAY(delay * 1000);
|
|
rc = SHMEM_RD(sc, func_mb[mb_idx].fw_mb_header);
|
|
} while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500));
|
|
|
|
BLOGD(sc, DBG_PHY,
|
|
"[after %d ms] read 0x%x seq 0x%x from FW MB\n",
|
|
cnt*delay, rc, seq);
|
|
|
|
/* is this a reply to our command? */
|
|
if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) {
|
|
rc &= FW_MSG_CODE_MASK;
|
|
} else {
|
|
/* Ruh-roh! */
|
|
BLOGE(sc, "FW failed to respond!\n");
|
|
// XXX bxe_fw_dump(sc);
|
|
rc = 0;
|
|
}
|
|
|
|
BXE_FWMB_UNLOCK(sc);
|
|
return (rc);
|
|
}
|
|
|
|
static uint32_t
|
|
bxe_fw_command(struct bxe_softc *sc,
|
|
uint32_t command,
|
|
uint32_t param)
|
|
{
|
|
return (elink_cb_fw_command(sc, command, param));
|
|
}
|
|
|
|
static void
|
|
__storm_memset_dma_mapping(struct bxe_softc *sc,
|
|
uint32_t addr,
|
|
bus_addr_t mapping)
|
|
{
|
|
REG_WR(sc, addr, U64_LO(mapping));
|
|
REG_WR(sc, (addr + 4), U64_HI(mapping));
|
|
}
|
|
|
|
static void
|
|
storm_memset_spq_addr(struct bxe_softc *sc,
|
|
bus_addr_t mapping,
|
|
uint16_t abs_fid)
|
|
{
|
|
uint32_t addr = (XSEM_REG_FAST_MEMORY +
|
|
XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid));
|
|
__storm_memset_dma_mapping(sc, addr, mapping);
|
|
}
|
|
|
|
static void
|
|
storm_memset_vf_to_pf(struct bxe_softc *sc,
|
|
uint16_t abs_fid,
|
|
uint16_t pf_id)
|
|
{
|
|
REG_WR8(sc, (BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid)), pf_id);
|
|
REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid)), pf_id);
|
|
REG_WR8(sc, (BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid)), pf_id);
|
|
REG_WR8(sc, (BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid)), pf_id);
|
|
}
|
|
|
|
static void
|
|
storm_memset_func_en(struct bxe_softc *sc,
|
|
uint16_t abs_fid,
|
|
uint8_t enable)
|
|
{
|
|
REG_WR8(sc, (BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid)), enable);
|
|
REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid)), enable);
|
|
REG_WR8(sc, (BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid)), enable);
|
|
REG_WR8(sc, (BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid)), enable);
|
|
}
|
|
|
|
static void
|
|
storm_memset_eq_data(struct bxe_softc *sc,
|
|
struct event_ring_data *eq_data,
|
|
uint16_t pfid)
|
|
{
|
|
uint32_t addr;
|
|
size_t size;
|
|
|
|
addr = (BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_DATA_OFFSET(pfid));
|
|
size = sizeof(struct event_ring_data);
|
|
ecore_storm_memset_struct(sc, addr, size, (uint32_t *)eq_data);
|
|
}
|
|
|
|
static void
|
|
storm_memset_eq_prod(struct bxe_softc *sc,
|
|
uint16_t eq_prod,
|
|
uint16_t pfid)
|
|
{
|
|
uint32_t addr = (BAR_CSTRORM_INTMEM +
|
|
CSTORM_EVENT_RING_PROD_OFFSET(pfid));
|
|
REG_WR16(sc, addr, eq_prod);
|
|
}
|
|
|
|
/*
|
|
* Post a slowpath command.
|
|
*
|
|
* A slowpath command is used to propogate a configuration change through
|
|
* the controller in a controlled manner, allowing each STORM processor and
|
|
* other H/W blocks to phase in the change. The commands sent on the
|
|
* slowpath are referred to as ramrods. Depending on the ramrod used the
|
|
* completion of the ramrod will occur in different ways. Here's a
|
|
* breakdown of ramrods and how they complete:
|
|
*
|
|
* RAMROD_CMD_ID_ETH_PORT_SETUP
|
|
* Used to setup the leading connection on a port. Completes on the
|
|
* Receive Completion Queue (RCQ) of that port (typically fp[0]).
|
|
*
|
|
* RAMROD_CMD_ID_ETH_CLIENT_SETUP
|
|
* Used to setup an additional connection on a port. Completes on the
|
|
* RCQ of the multi-queue/RSS connection being initialized.
|
|
*
|
|
* RAMROD_CMD_ID_ETH_STAT_QUERY
|
|
* Used to force the storm processors to update the statistics database
|
|
* in host memory. This ramrod is send on the leading connection CID and
|
|
* completes as an index increment of the CSTORM on the default status
|
|
* block.
|
|
*
|
|
* RAMROD_CMD_ID_ETH_UPDATE
|
|
* Used to update the state of the leading connection, usually to udpate
|
|
* the RSS indirection table. Completes on the RCQ of the leading
|
|
* connection. (Not currently used under FreeBSD until OS support becomes
|
|
* available.)
|
|
*
|
|
* RAMROD_CMD_ID_ETH_HALT
|
|
* Used when tearing down a connection prior to driver unload. Completes
|
|
* on the RCQ of the multi-queue/RSS connection being torn down. Don't
|
|
* use this on the leading connection.
|
|
*
|
|
* RAMROD_CMD_ID_ETH_SET_MAC
|
|
* Sets the Unicast/Broadcast/Multicast used by the port. Completes on
|
|
* the RCQ of the leading connection.
|
|
*
|
|
* RAMROD_CMD_ID_ETH_CFC_DEL
|
|
* Used when tearing down a conneciton prior to driver unload. Completes
|
|
* on the RCQ of the leading connection (since the current connection
|
|
* has been completely removed from controller memory).
|
|
*
|
|
* RAMROD_CMD_ID_ETH_PORT_DEL
|
|
* Used to tear down the leading connection prior to driver unload,
|
|
* typically fp[0]. Completes as an index increment of the CSTORM on the
|
|
* default status block.
|
|
*
|
|
* RAMROD_CMD_ID_ETH_FORWARD_SETUP
|
|
* Used for connection offload. Completes on the RCQ of the multi-queue
|
|
* RSS connection that is being offloaded. (Not currently used under
|
|
* FreeBSD.)
|
|
*
|
|
* There can only be one command pending per function.
|
|
*
|
|
* Returns:
|
|
* 0 = Success, !0 = Failure.
|
|
*/
|
|
|
|
/* must be called under the spq lock */
|
|
static inline
|
|
struct eth_spe *bxe_sp_get_next(struct bxe_softc *sc)
|
|
{
|
|
struct eth_spe *next_spe = sc->spq_prod_bd;
|
|
|
|
if (sc->spq_prod_bd == sc->spq_last_bd) {
|
|
/* wrap back to the first eth_spq */
|
|
sc->spq_prod_bd = sc->spq;
|
|
sc->spq_prod_idx = 0;
|
|
} else {
|
|
sc->spq_prod_bd++;
|
|
sc->spq_prod_idx++;
|
|
}
|
|
|
|
return (next_spe);
|
|
}
|
|
|
|
/* must be called under the spq lock */
|
|
static inline
|
|
void bxe_sp_prod_update(struct bxe_softc *sc)
|
|
{
|
|
int func = SC_FUNC(sc);
|
|
|
|
/*
|
|
* Make sure that BD data is updated before writing the producer.
|
|
* BD data is written to the memory, the producer is read from the
|
|
* memory, thus we need a full memory barrier to ensure the ordering.
|
|
*/
|
|
mb();
|
|
|
|
REG_WR16(sc, (BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func)),
|
|
sc->spq_prod_idx);
|
|
|
|
bus_space_barrier(sc->bar[BAR0].tag, sc->bar[BAR0].handle, 0, 0,
|
|
BUS_SPACE_BARRIER_WRITE);
|
|
}
|
|
|
|
/**
|
|
* bxe_is_contextless_ramrod - check if the current command ends on EQ
|
|
*
|
|
* @cmd: command to check
|
|
* @cmd_type: command type
|
|
*/
|
|
static inline
|
|
int bxe_is_contextless_ramrod(int cmd,
|
|
int cmd_type)
|
|
{
|
|
if ((cmd_type == NONE_CONNECTION_TYPE) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_FORWARD_SETUP) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_FILTER_RULES) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_MULTICAST_RULES) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_SET_MAC) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_RSS_UPDATE)) {
|
|
return (TRUE);
|
|
} else {
|
|
return (FALSE);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* bxe_sp_post - place a single command on an SP ring
|
|
*
|
|
* @sc: driver handle
|
|
* @command: command to place (e.g. SETUP, FILTER_RULES, etc.)
|
|
* @cid: SW CID the command is related to
|
|
* @data_hi: command private data address (high 32 bits)
|
|
* @data_lo: command private data address (low 32 bits)
|
|
* @cmd_type: command type (e.g. NONE, ETH)
|
|
*
|
|
* SP data is handled as if it's always an address pair, thus data fields are
|
|
* not swapped to little endian in upper functions. Instead this function swaps
|
|
* data as if it's two uint32 fields.
|
|
*/
|
|
int
|
|
bxe_sp_post(struct bxe_softc *sc,
|
|
int command,
|
|
int cid,
|
|
uint32_t data_hi,
|
|
uint32_t data_lo,
|
|
int cmd_type)
|
|
{
|
|
struct eth_spe *spe;
|
|
uint16_t type;
|
|
int common;
|
|
|
|
common = bxe_is_contextless_ramrod(command, cmd_type);
|
|
|
|
BXE_SP_LOCK(sc);
|
|
|
|
if (common) {
|
|
if (!atomic_load_acq_long(&sc->eq_spq_left)) {
|
|
BLOGE(sc, "EQ ring is full!\n");
|
|
BXE_SP_UNLOCK(sc);
|
|
return (-1);
|
|
}
|
|
} else {
|
|
if (!atomic_load_acq_long(&sc->cq_spq_left)) {
|
|
BLOGE(sc, "SPQ ring is full!\n");
|
|
BXE_SP_UNLOCK(sc);
|
|
return (-1);
|
|
}
|
|
}
|
|
|
|
spe = bxe_sp_get_next(sc);
|
|
|
|
/* CID needs port number to be encoded int it */
|
|
spe->hdr.conn_and_cmd_data =
|
|
htole32((command << SPE_HDR_CMD_ID_SHIFT) | HW_CID(sc, cid));
|
|
|
|
type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) & SPE_HDR_CONN_TYPE;
|
|
|
|
/* TBD: Check if it works for VFs */
|
|
type |= ((SC_FUNC(sc) << SPE_HDR_FUNCTION_ID_SHIFT) &
|
|
SPE_HDR_FUNCTION_ID);
|
|
|
|
spe->hdr.type = htole16(type);
|
|
|
|
spe->data.update_data_addr.hi = htole32(data_hi);
|
|
spe->data.update_data_addr.lo = htole32(data_lo);
|
|
|
|
/*
|
|
* It's ok if the actual decrement is issued towards the memory
|
|
* somewhere between the lock and unlock. Thus no more explict
|
|
* memory barrier is needed.
|
|
*/
|
|
if (common) {
|
|
atomic_subtract_acq_long(&sc->eq_spq_left, 1);
|
|
} else {
|
|
atomic_subtract_acq_long(&sc->cq_spq_left, 1);
|
|
}
|
|
|
|
BLOGD(sc, DBG_SP, "SPQE -> %#jx\n", (uintmax_t)sc->spq_dma.paddr);
|
|
BLOGD(sc, DBG_SP, "FUNC_RDATA -> %p / %#jx\n",
|
|
BXE_SP(sc, func_rdata), (uintmax_t)BXE_SP_MAPPING(sc, func_rdata));
|
|
BLOGD(sc, DBG_SP,
|
|
"SPQE[%x] (%x:%x) (cmd, common?) (%d,%d) hw_cid %x data (%x:%x) type(0x%x) left (CQ, EQ) (%lx,%lx)\n",
|
|
sc->spq_prod_idx,
|
|
(uint32_t)U64_HI(sc->spq_dma.paddr),
|
|
(uint32_t)(U64_LO(sc->spq_dma.paddr) + (uint8_t *)sc->spq_prod_bd - (uint8_t *)sc->spq),
|
|
command,
|
|
common,
|
|
HW_CID(sc, cid),
|
|
data_hi,
|
|
data_lo,
|
|
type,
|
|
atomic_load_acq_long(&sc->cq_spq_left),
|
|
atomic_load_acq_long(&sc->eq_spq_left));
|
|
|
|
bxe_sp_prod_update(sc);
|
|
|
|
BXE_SP_UNLOCK(sc);
|
|
return (0);
|
|
}
|
|
|
|
/**
|
|
* bxe_debug_print_ind_table - prints the indirection table configuration.
|
|
*
|
|
* @sc: driver hanlde
|
|
* @p: pointer to rss configuration
|
|
*/
|
|
#if 0
|
|
static void
|
|
bxe_debug_print_ind_table(struct bxe_softc *sc,
|
|
struct ecore_config_rss_params *p)
|
|
{
|
|
int i;
|
|
|
|
BLOGD(sc, DBG_LOAD, "Setting indirection table to:\n");
|
|
BLOGD(sc, DBG_LOAD, " 0x0000: ");
|
|
for (i = 0; i < T_ETH_INDIRECTION_TABLE_SIZE; i++) {
|
|
BLOGD(sc, DBG_LOAD, "0x%02x ", p->ind_table[i]);
|
|
|
|
/* Print 4 bytes in a line */
|
|
if ((i + 1 < T_ETH_INDIRECTION_TABLE_SIZE) &&
|
|
(((i + 1) & 0x3) == 0)) {
|
|
BLOGD(sc, DBG_LOAD, "\n");
|
|
BLOGD(sc, DBG_LOAD, "0x%04x: ", i + 1);
|
|
}
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "\n");
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* FreeBSD Device probe function.
|
|
*
|
|
* Compares the device found to the driver's list of supported devices and
|
|
* reports back to the bsd loader whether this is the right driver for the device.
|
|
* This is the driver entry function called from the "kldload" command.
|
|
*
|
|
* Returns:
|
|
* BUS_PROBE_DEFAULT on success, positive value on failure.
|
|
*/
|
|
static int
|
|
bxe_probe(device_t dev)
|
|
{
|
|
struct bxe_softc *sc;
|
|
struct bxe_device_type *t;
|
|
char *descbuf;
|
|
uint16_t did, sdid, svid, vid;
|
|
|
|
/* Find our device structure */
|
|
sc = device_get_softc(dev);
|
|
sc->dev = dev;
|
|
t = bxe_devs;
|
|
|
|
/* Get the data for the device to be probed. */
|
|
vid = pci_get_vendor(dev);
|
|
did = pci_get_device(dev);
|
|
svid = pci_get_subvendor(dev);
|
|
sdid = pci_get_subdevice(dev);
|
|
|
|
BLOGD(sc, DBG_LOAD,
|
|
"%s(); VID = 0x%04X, DID = 0x%04X, SVID = 0x%04X, "
|
|
"SDID = 0x%04X\n", __FUNCTION__, vid, did, svid, sdid);
|
|
|
|
/* Look through the list of known devices for a match. */
|
|
while (t->bxe_name != NULL) {
|
|
if ((vid == t->bxe_vid) && (did == t->bxe_did) &&
|
|
((svid == t->bxe_svid) || (t->bxe_svid == PCI_ANY_ID)) &&
|
|
((sdid == t->bxe_sdid) || (t->bxe_sdid == PCI_ANY_ID))) {
|
|
descbuf = malloc(BXE_DEVDESC_MAX, M_TEMP, M_NOWAIT);
|
|
if (descbuf == NULL)
|
|
return (ENOMEM);
|
|
|
|
/* Print out the device identity. */
|
|
snprintf(descbuf, BXE_DEVDESC_MAX,
|
|
"%s (%c%d) BXE v:%s\n", t->bxe_name,
|
|
(((pci_read_config(dev, PCIR_REVID, 4) &
|
|
0xf0) >> 4) + 'A'),
|
|
(pci_read_config(dev, PCIR_REVID, 4) & 0xf),
|
|
BXE_DRIVER_VERSION);
|
|
|
|
device_set_desc_copy(dev, descbuf);
|
|
free(descbuf, M_TEMP);
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
t++;
|
|
}
|
|
|
|
return (ENXIO);
|
|
}
|
|
|
|
static void
|
|
bxe_init_mutexes(struct bxe_softc *sc)
|
|
{
|
|
#ifdef BXE_CORE_LOCK_SX
|
|
snprintf(sc->core_sx_name, sizeof(sc->core_sx_name),
|
|
"bxe%d_core_lock", sc->unit);
|
|
sx_init(&sc->core_sx, sc->core_sx_name);
|
|
#else
|
|
snprintf(sc->core_mtx_name, sizeof(sc->core_mtx_name),
|
|
"bxe%d_core_lock", sc->unit);
|
|
mtx_init(&sc->core_mtx, sc->core_mtx_name, NULL, MTX_DEF);
|
|
#endif
|
|
|
|
snprintf(sc->sp_mtx_name, sizeof(sc->sp_mtx_name),
|
|
"bxe%d_sp_lock", sc->unit);
|
|
mtx_init(&sc->sp_mtx, sc->sp_mtx_name, NULL, MTX_DEF);
|
|
|
|
snprintf(sc->dmae_mtx_name, sizeof(sc->dmae_mtx_name),
|
|
"bxe%d_dmae_lock", sc->unit);
|
|
mtx_init(&sc->dmae_mtx, sc->dmae_mtx_name, NULL, MTX_DEF);
|
|
|
|
snprintf(sc->port.phy_mtx_name, sizeof(sc->port.phy_mtx_name),
|
|
"bxe%d_phy_lock", sc->unit);
|
|
mtx_init(&sc->port.phy_mtx, sc->port.phy_mtx_name, NULL, MTX_DEF);
|
|
|
|
snprintf(sc->fwmb_mtx_name, sizeof(sc->fwmb_mtx_name),
|
|
"bxe%d_fwmb_lock", sc->unit);
|
|
mtx_init(&sc->fwmb_mtx, sc->fwmb_mtx_name, NULL, MTX_DEF);
|
|
|
|
snprintf(sc->print_mtx_name, sizeof(sc->print_mtx_name),
|
|
"bxe%d_print_lock", sc->unit);
|
|
mtx_init(&(sc->print_mtx), sc->print_mtx_name, NULL, MTX_DEF);
|
|
|
|
snprintf(sc->stats_mtx_name, sizeof(sc->stats_mtx_name),
|
|
"bxe%d_stats_lock", sc->unit);
|
|
mtx_init(&(sc->stats_mtx), sc->stats_mtx_name, NULL, MTX_DEF);
|
|
|
|
snprintf(sc->mcast_mtx_name, sizeof(sc->mcast_mtx_name),
|
|
"bxe%d_mcast_lock", sc->unit);
|
|
mtx_init(&(sc->mcast_mtx), sc->mcast_mtx_name, NULL, MTX_DEF);
|
|
}
|
|
|
|
static void
|
|
bxe_release_mutexes(struct bxe_softc *sc)
|
|
{
|
|
#ifdef BXE_CORE_LOCK_SX
|
|
sx_destroy(&sc->core_sx);
|
|
#else
|
|
if (mtx_initialized(&sc->core_mtx)) {
|
|
mtx_destroy(&sc->core_mtx);
|
|
}
|
|
#endif
|
|
|
|
if (mtx_initialized(&sc->sp_mtx)) {
|
|
mtx_destroy(&sc->sp_mtx);
|
|
}
|
|
|
|
if (mtx_initialized(&sc->dmae_mtx)) {
|
|
mtx_destroy(&sc->dmae_mtx);
|
|
}
|
|
|
|
if (mtx_initialized(&sc->port.phy_mtx)) {
|
|
mtx_destroy(&sc->port.phy_mtx);
|
|
}
|
|
|
|
if (mtx_initialized(&sc->fwmb_mtx)) {
|
|
mtx_destroy(&sc->fwmb_mtx);
|
|
}
|
|
|
|
if (mtx_initialized(&sc->print_mtx)) {
|
|
mtx_destroy(&sc->print_mtx);
|
|
}
|
|
|
|
if (mtx_initialized(&sc->stats_mtx)) {
|
|
mtx_destroy(&sc->stats_mtx);
|
|
}
|
|
|
|
if (mtx_initialized(&sc->mcast_mtx)) {
|
|
mtx_destroy(&sc->mcast_mtx);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_tx_disable(struct bxe_softc* sc)
|
|
{
|
|
if_t ifp = sc->ifp;
|
|
|
|
/* tell the stack the driver is stopped and TX queue is full */
|
|
if (ifp != NULL) {
|
|
if_setdrvflags(ifp, 0);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_drv_pulse(struct bxe_softc *sc)
|
|
{
|
|
SHMEM_WR(sc, func_mb[SC_FW_MB_IDX(sc)].drv_pulse_mb,
|
|
sc->fw_drv_pulse_wr_seq);
|
|
}
|
|
|
|
static inline uint16_t
|
|
bxe_tx_avail(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp)
|
|
{
|
|
int16_t used;
|
|
uint16_t prod;
|
|
uint16_t cons;
|
|
|
|
prod = fp->tx_bd_prod;
|
|
cons = fp->tx_bd_cons;
|
|
|
|
used = SUB_S16(prod, cons);
|
|
|
|
#if 0
|
|
KASSERT((used < 0), ("used tx bds < 0"));
|
|
KASSERT((used > sc->tx_ring_size), ("used tx bds > tx_ring_size"));
|
|
KASSERT(((sc->tx_ring_size - used) > MAX_TX_AVAIL),
|
|
("invalid number of tx bds used"));
|
|
#endif
|
|
|
|
return (int16_t)(sc->tx_ring_size) - used;
|
|
}
|
|
|
|
static inline int
|
|
bxe_tx_queue_has_work(struct bxe_fastpath *fp)
|
|
{
|
|
uint16_t hw_cons;
|
|
|
|
mb(); /* status block fields can change */
|
|
hw_cons = le16toh(*fp->tx_cons_sb);
|
|
return (hw_cons != fp->tx_pkt_cons);
|
|
}
|
|
|
|
static inline uint8_t
|
|
bxe_has_tx_work(struct bxe_fastpath *fp)
|
|
{
|
|
/* expand this for multi-cos if ever supported */
|
|
return (bxe_tx_queue_has_work(fp)) ? TRUE : FALSE;
|
|
}
|
|
|
|
static inline int
|
|
bxe_has_rx_work(struct bxe_fastpath *fp)
|
|
{
|
|
uint16_t rx_cq_cons_sb;
|
|
|
|
mb(); /* status block fields can change */
|
|
rx_cq_cons_sb = le16toh(*fp->rx_cq_cons_sb);
|
|
if ((rx_cq_cons_sb & RCQ_MAX) == RCQ_MAX)
|
|
rx_cq_cons_sb++;
|
|
return (fp->rx_cq_cons != rx_cq_cons_sb);
|
|
}
|
|
|
|
static void
|
|
bxe_sp_event(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp,
|
|
union eth_rx_cqe *rr_cqe)
|
|
{
|
|
int cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data);
|
|
int command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data);
|
|
enum ecore_queue_cmd drv_cmd = ECORE_Q_CMD_MAX;
|
|
struct ecore_queue_sp_obj *q_obj = &BXE_SP_OBJ(sc, fp).q_obj;
|
|
|
|
BLOGD(sc, DBG_SP, "fp=%d cid=%d got ramrod #%d state is %x type is %d\n",
|
|
fp->index, cid, command, sc->state, rr_cqe->ramrod_cqe.ramrod_type);
|
|
|
|
#if 0
|
|
/*
|
|
* If cid is within VF range, replace the slowpath object with the
|
|
* one corresponding to this VF
|
|
*/
|
|
if ((cid >= BXE_FIRST_VF_CID) && (cid < BXE_FIRST_VF_CID + BXE_VF_CIDS)) {
|
|
bxe_iov_set_queue_sp_obj(sc, cid, &q_obj);
|
|
}
|
|
#endif
|
|
|
|
switch (command) {
|
|
case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE):
|
|
BLOGD(sc, DBG_SP, "got UPDATE ramrod. CID %d\n", cid);
|
|
drv_cmd = ECORE_Q_CMD_UPDATE;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_CLIENT_SETUP):
|
|
BLOGD(sc, DBG_SP, "got MULTI[%d] setup ramrod\n", cid);
|
|
drv_cmd = ECORE_Q_CMD_SETUP;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP):
|
|
BLOGD(sc, DBG_SP, "got MULTI[%d] tx-only setup ramrod\n", cid);
|
|
drv_cmd = ECORE_Q_CMD_SETUP_TX_ONLY;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_HALT):
|
|
BLOGD(sc, DBG_SP, "got MULTI[%d] halt ramrod\n", cid);
|
|
drv_cmd = ECORE_Q_CMD_HALT;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_TERMINATE):
|
|
BLOGD(sc, DBG_SP, "got MULTI[%d] teminate ramrod\n", cid);
|
|
drv_cmd = ECORE_Q_CMD_TERMINATE;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_EMPTY):
|
|
BLOGD(sc, DBG_SP, "got MULTI[%d] empty ramrod\n", cid);
|
|
drv_cmd = ECORE_Q_CMD_EMPTY;
|
|
break;
|
|
|
|
default:
|
|
BLOGD(sc, DBG_SP, "ERROR: unexpected MC reply (%d) on fp[%d]\n",
|
|
command, fp->index);
|
|
return;
|
|
}
|
|
|
|
if ((drv_cmd != ECORE_Q_CMD_MAX) &&
|
|
q_obj->complete_cmd(sc, q_obj, drv_cmd)) {
|
|
/*
|
|
* q_obj->complete_cmd() failure means that this was
|
|
* an unexpected completion.
|
|
*
|
|
* In this case we don't want to increase the sc->spq_left
|
|
* because apparently we haven't sent this command the first
|
|
* place.
|
|
*/
|
|
// bxe_panic(sc, ("Unexpected SP completion\n"));
|
|
return;
|
|
}
|
|
|
|
#if 0
|
|
/* SRIOV: reschedule any 'in_progress' operations */
|
|
bxe_iov_sp_event(sc, cid, TRUE);
|
|
#endif
|
|
|
|
atomic_add_acq_long(&sc->cq_spq_left, 1);
|
|
|
|
BLOGD(sc, DBG_SP, "sc->cq_spq_left 0x%lx\n",
|
|
atomic_load_acq_long(&sc->cq_spq_left));
|
|
|
|
#if 0
|
|
if ((drv_cmd == ECORE_Q_CMD_UPDATE) && (IS_FCOE_FP(fp)) &&
|
|
(!!bxe_test_bit(ECORE_AFEX_FCOE_Q_UPDATE_PENDING, &sc->sp_state))) {
|
|
/*
|
|
* If Queue update ramrod is completed for last Queue in AFEX VIF set
|
|
* flow, then ACK MCP at the end. Mark pending ACK to MCP bit to
|
|
* prevent case that both bits are cleared. At the end of load/unload
|
|
* driver checks that sp_state is cleared and this order prevents
|
|
* races.
|
|
*/
|
|
bxe_set_bit(ECORE_AFEX_PENDING_VIFSET_MCP_ACK, &sc->sp_state);
|
|
wmb();
|
|
bxe_clear_bit(ECORE_AFEX_FCOE_Q_UPDATE_PENDING, &sc->sp_state);
|
|
|
|
/* schedule the sp task as MCP ack is required */
|
|
bxe_schedule_sp_task(sc);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* The current mbuf is part of an aggregation. Move the mbuf into the TPA
|
|
* aggregation queue, put an empty mbuf back onto the receive chain, and mark
|
|
* the current aggregation queue as in-progress.
|
|
*/
|
|
static void
|
|
bxe_tpa_start(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp,
|
|
uint16_t queue,
|
|
uint16_t cons,
|
|
uint16_t prod,
|
|
struct eth_fast_path_rx_cqe *cqe)
|
|
{
|
|
struct bxe_sw_rx_bd tmp_bd;
|
|
struct bxe_sw_rx_bd *rx_buf;
|
|
struct eth_rx_bd *rx_bd;
|
|
int max_agg_queues;
|
|
struct bxe_sw_tpa_info *tpa_info = &fp->rx_tpa_info[queue];
|
|
uint16_t index;
|
|
|
|
BLOGD(sc, DBG_LRO, "fp[%02d].tpa[%02d] TPA START "
|
|
"cons=%d prod=%d\n",
|
|
fp->index, queue, cons, prod);
|
|
|
|
max_agg_queues = MAX_AGG_QS(sc);
|
|
|
|
KASSERT((queue < max_agg_queues),
|
|
("fp[%02d] invalid aggr queue (%d >= %d)!",
|
|
fp->index, queue, max_agg_queues));
|
|
|
|
KASSERT((tpa_info->state == BXE_TPA_STATE_STOP),
|
|
("fp[%02d].tpa[%02d] starting aggr on queue not stopped!",
|
|
fp->index, queue));
|
|
|
|
/* copy the existing mbuf and mapping from the TPA pool */
|
|
tmp_bd = tpa_info->bd;
|
|
|
|
if (tmp_bd.m == NULL) {
|
|
BLOGE(sc, "fp[%02d].tpa[%02d] mbuf not allocated!\n",
|
|
fp->index, queue);
|
|
/* XXX Error handling? */
|
|
return;
|
|
}
|
|
|
|
/* change the TPA queue to the start state */
|
|
tpa_info->state = BXE_TPA_STATE_START;
|
|
tpa_info->placement_offset = cqe->placement_offset;
|
|
tpa_info->parsing_flags = le16toh(cqe->pars_flags.flags);
|
|
tpa_info->vlan_tag = le16toh(cqe->vlan_tag);
|
|
tpa_info->len_on_bd = le16toh(cqe->len_on_bd);
|
|
|
|
fp->rx_tpa_queue_used |= (1 << queue);
|
|
|
|
/*
|
|
* If all the buffer descriptors are filled with mbufs then fill in
|
|
* the current consumer index with a new BD. Else if a maximum Rx
|
|
* buffer limit is imposed then fill in the next producer index.
|
|
*/
|
|
index = (sc->max_rx_bufs != RX_BD_USABLE) ?
|
|
prod : cons;
|
|
|
|
/* move the received mbuf and mapping to TPA pool */
|
|
tpa_info->bd = fp->rx_mbuf_chain[cons];
|
|
|
|
/* release any existing RX BD mbuf mappings */
|
|
if (cons != index) {
|
|
rx_buf = &fp->rx_mbuf_chain[cons];
|
|
|
|
if (rx_buf->m_map != NULL) {
|
|
bus_dmamap_sync(fp->rx_mbuf_tag, rx_buf->m_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(fp->rx_mbuf_tag, rx_buf->m_map);
|
|
}
|
|
|
|
/*
|
|
* We get here when the maximum number of rx buffers is less than
|
|
* RX_BD_USABLE. The mbuf is already saved above so it's OK to NULL
|
|
* it out here without concern of a memory leak.
|
|
*/
|
|
fp->rx_mbuf_chain[cons].m = NULL;
|
|
}
|
|
|
|
/* update the Rx SW BD with the mbuf info from the TPA pool */
|
|
fp->rx_mbuf_chain[index] = tmp_bd;
|
|
|
|
/* update the Rx BD with the empty mbuf phys address from the TPA pool */
|
|
rx_bd = &fp->rx_chain[index];
|
|
rx_bd->addr_hi = htole32(U64_HI(tpa_info->seg.ds_addr));
|
|
rx_bd->addr_lo = htole32(U64_LO(tpa_info->seg.ds_addr));
|
|
}
|
|
|
|
/*
|
|
* When a TPA aggregation is completed, loop through the individual mbufs
|
|
* of the aggregation, combining them into a single mbuf which will be sent
|
|
* up the stack. Refill all freed SGEs with mbufs as we go along.
|
|
*/
|
|
static int
|
|
bxe_fill_frag_mbuf(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp,
|
|
struct bxe_sw_tpa_info *tpa_info,
|
|
uint16_t queue,
|
|
uint16_t pages,
|
|
struct mbuf *m,
|
|
struct eth_end_agg_rx_cqe *cqe,
|
|
uint16_t cqe_idx)
|
|
{
|
|
struct mbuf *m_frag;
|
|
uint32_t frag_len, frag_size, i;
|
|
uint16_t sge_idx;
|
|
int rc = 0;
|
|
int j;
|
|
|
|
frag_size = le16toh(cqe->pkt_len) - tpa_info->len_on_bd;
|
|
|
|
BLOGD(sc, DBG_LRO,
|
|
"fp[%02d].tpa[%02d] TPA fill len_on_bd=%d frag_size=%d pages=%d\n",
|
|
fp->index, queue, tpa_info->len_on_bd, frag_size, pages);
|
|
|
|
/* make sure the aggregated frame is not too big to handle */
|
|
if (pages > 8 * PAGES_PER_SGE) {
|
|
BLOGE(sc, "fp[%02d].sge[0x%04x] has too many pages (%d)! "
|
|
"pkt_len=%d len_on_bd=%d frag_size=%d\n",
|
|
fp->index, cqe_idx, pages, le16toh(cqe->pkt_len),
|
|
tpa_info->len_on_bd, frag_size);
|
|
bxe_panic(sc, ("sge page count error\n"));
|
|
return (EINVAL);
|
|
}
|
|
|
|
/*
|
|
* Scan through the scatter gather list pulling individual mbufs into a
|
|
* single mbuf for the host stack.
|
|
*/
|
|
for (i = 0, j = 0; i < pages; i += PAGES_PER_SGE, j++) {
|
|
sge_idx = RX_SGE(le16toh(cqe->sgl_or_raw_data.sgl[j]));
|
|
|
|
/*
|
|
* Firmware gives the indices of the SGE as if the ring is an array
|
|
* (meaning that the "next" element will consume 2 indices).
|
|
*/
|
|
frag_len = min(frag_size, (uint32_t)(SGE_PAGES));
|
|
|
|
BLOGD(sc, DBG_LRO, "fp[%02d].tpa[%02d] TPA fill i=%d j=%d "
|
|
"sge_idx=%d frag_size=%d frag_len=%d\n",
|
|
fp->index, queue, i, j, sge_idx, frag_size, frag_len);
|
|
|
|
m_frag = fp->rx_sge_mbuf_chain[sge_idx].m;
|
|
|
|
/* allocate a new mbuf for the SGE */
|
|
rc = bxe_alloc_rx_sge_mbuf(fp, sge_idx);
|
|
if (rc) {
|
|
/* Leave all remaining SGEs in the ring! */
|
|
return (rc);
|
|
}
|
|
|
|
/* update the fragment length */
|
|
m_frag->m_len = frag_len;
|
|
|
|
/* concatenate the fragment to the head mbuf */
|
|
m_cat(m, m_frag);
|
|
fp->eth_q_stats.mbuf_alloc_sge--;
|
|
|
|
/* update the TPA mbuf size and remaining fragment size */
|
|
m->m_pkthdr.len += frag_len;
|
|
frag_size -= frag_len;
|
|
}
|
|
|
|
BLOGD(sc, DBG_LRO,
|
|
"fp[%02d].tpa[%02d] TPA fill done frag_size=%d\n",
|
|
fp->index, queue, frag_size);
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static inline void
|
|
bxe_clear_sge_mask_next_elems(struct bxe_fastpath *fp)
|
|
{
|
|
int i, j;
|
|
|
|
for (i = 1; i <= RX_SGE_NUM_PAGES; i++) {
|
|
int idx = RX_SGE_TOTAL_PER_PAGE * i - 1;
|
|
|
|
for (j = 0; j < 2; j++) {
|
|
BIT_VEC64_CLEAR_BIT(fp->sge_mask, idx);
|
|
idx--;
|
|
}
|
|
}
|
|
}
|
|
|
|
static inline void
|
|
bxe_init_sge_ring_bit_mask(struct bxe_fastpath *fp)
|
|
{
|
|
/* set the mask to all 1's, it's faster to compare to 0 than to 0xf's */
|
|
memset(fp->sge_mask, 0xff, sizeof(fp->sge_mask));
|
|
|
|
/*
|
|
* Clear the two last indices in the page to 1. These are the indices that
|
|
* correspond to the "next" element, hence will never be indicated and
|
|
* should be removed from the calculations.
|
|
*/
|
|
bxe_clear_sge_mask_next_elems(fp);
|
|
}
|
|
|
|
static inline void
|
|
bxe_update_last_max_sge(struct bxe_fastpath *fp,
|
|
uint16_t idx)
|
|
{
|
|
uint16_t last_max = fp->last_max_sge;
|
|
|
|
if (SUB_S16(idx, last_max) > 0) {
|
|
fp->last_max_sge = idx;
|
|
}
|
|
}
|
|
|
|
static inline void
|
|
bxe_update_sge_prod(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp,
|
|
uint16_t sge_len,
|
|
struct eth_end_agg_rx_cqe *cqe)
|
|
{
|
|
uint16_t last_max, last_elem, first_elem;
|
|
uint16_t delta = 0;
|
|
uint16_t i;
|
|
|
|
if (!sge_len) {
|
|
return;
|
|
}
|
|
|
|
/* first mark all used pages */
|
|
for (i = 0; i < sge_len; i++) {
|
|
BIT_VEC64_CLEAR_BIT(fp->sge_mask,
|
|
RX_SGE(le16toh(cqe->sgl_or_raw_data.sgl[i])));
|
|
}
|
|
|
|
BLOGD(sc, DBG_LRO,
|
|
"fp[%02d] fp_cqe->sgl[%d] = %d\n",
|
|
fp->index, sge_len - 1,
|
|
le16toh(cqe->sgl_or_raw_data.sgl[sge_len - 1]));
|
|
|
|
/* assume that the last SGE index is the biggest */
|
|
bxe_update_last_max_sge(fp,
|
|
le16toh(cqe->sgl_or_raw_data.sgl[sge_len - 1]));
|
|
|
|
last_max = RX_SGE(fp->last_max_sge);
|
|
last_elem = last_max >> BIT_VEC64_ELEM_SHIFT;
|
|
first_elem = RX_SGE(fp->rx_sge_prod) >> BIT_VEC64_ELEM_SHIFT;
|
|
|
|
/* if ring is not full */
|
|
if (last_elem + 1 != first_elem) {
|
|
last_elem++;
|
|
}
|
|
|
|
/* now update the prod */
|
|
for (i = first_elem; i != last_elem; i = RX_SGE_NEXT_MASK_ELEM(i)) {
|
|
if (__predict_true(fp->sge_mask[i])) {
|
|
break;
|
|
}
|
|
|
|
fp->sge_mask[i] = BIT_VEC64_ELEM_ONE_MASK;
|
|
delta += BIT_VEC64_ELEM_SZ;
|
|
}
|
|
|
|
if (delta > 0) {
|
|
fp->rx_sge_prod += delta;
|
|
/* clear page-end entries */
|
|
bxe_clear_sge_mask_next_elems(fp);
|
|
}
|
|
|
|
BLOGD(sc, DBG_LRO,
|
|
"fp[%02d] fp->last_max_sge=%d fp->rx_sge_prod=%d\n",
|
|
fp->index, fp->last_max_sge, fp->rx_sge_prod);
|
|
}
|
|
|
|
/*
|
|
* The aggregation on the current TPA queue has completed. Pull the individual
|
|
* mbuf fragments together into a single mbuf, perform all necessary checksum
|
|
* calculations, and send the resuting mbuf to the stack.
|
|
*/
|
|
static void
|
|
bxe_tpa_stop(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp,
|
|
struct bxe_sw_tpa_info *tpa_info,
|
|
uint16_t queue,
|
|
uint16_t pages,
|
|
struct eth_end_agg_rx_cqe *cqe,
|
|
uint16_t cqe_idx)
|
|
{
|
|
if_t ifp = sc->ifp;
|
|
struct mbuf *m;
|
|
int rc = 0;
|
|
|
|
BLOGD(sc, DBG_LRO,
|
|
"fp[%02d].tpa[%02d] pad=%d pkt_len=%d pages=%d vlan=%d\n",
|
|
fp->index, queue, tpa_info->placement_offset,
|
|
le16toh(cqe->pkt_len), pages, tpa_info->vlan_tag);
|
|
|
|
m = tpa_info->bd.m;
|
|
|
|
/* allocate a replacement before modifying existing mbuf */
|
|
rc = bxe_alloc_rx_tpa_mbuf(fp, queue);
|
|
if (rc) {
|
|
/* drop the frame and log an error */
|
|
fp->eth_q_stats.rx_soft_errors++;
|
|
goto bxe_tpa_stop_exit;
|
|
}
|
|
|
|
/* we have a replacement, fixup the current mbuf */
|
|
m_adj(m, tpa_info->placement_offset);
|
|
m->m_pkthdr.len = m->m_len = tpa_info->len_on_bd;
|
|
|
|
/* mark the checksums valid (taken care of by the firmware) */
|
|
fp->eth_q_stats.rx_ofld_frames_csum_ip++;
|
|
fp->eth_q_stats.rx_ofld_frames_csum_tcp_udp++;
|
|
m->m_pkthdr.csum_data = 0xffff;
|
|
m->m_pkthdr.csum_flags |= (CSUM_IP_CHECKED |
|
|
CSUM_IP_VALID |
|
|
CSUM_DATA_VALID |
|
|
CSUM_PSEUDO_HDR);
|
|
|
|
/* aggregate all of the SGEs into a single mbuf */
|
|
rc = bxe_fill_frag_mbuf(sc, fp, tpa_info, queue, pages, m, cqe, cqe_idx);
|
|
if (rc) {
|
|
/* drop the packet and log an error */
|
|
fp->eth_q_stats.rx_soft_errors++;
|
|
m_freem(m);
|
|
} else {
|
|
if (tpa_info->parsing_flags & PARSING_FLAGS_VLAN) {
|
|
m->m_pkthdr.ether_vtag = tpa_info->vlan_tag;
|
|
m->m_flags |= M_VLANTAG;
|
|
}
|
|
|
|
/* assign packet to this interface interface */
|
|
if_setrcvif(m, ifp);
|
|
|
|
#if __FreeBSD_version >= 800000
|
|
/* specify what RSS queue was used for this flow */
|
|
m->m_pkthdr.flowid = fp->index;
|
|
m->m_flags |= M_FLOWID;
|
|
#endif
|
|
|
|
if_incipackets(ifp, 1);
|
|
fp->eth_q_stats.rx_tpa_pkts++;
|
|
|
|
/* pass the frame to the stack */
|
|
if_input(ifp, m);
|
|
}
|
|
|
|
/* we passed an mbuf up the stack or dropped the frame */
|
|
fp->eth_q_stats.mbuf_alloc_tpa--;
|
|
|
|
bxe_tpa_stop_exit:
|
|
|
|
fp->rx_tpa_info[queue].state = BXE_TPA_STATE_STOP;
|
|
fp->rx_tpa_queue_used &= ~(1 << queue);
|
|
}
|
|
|
|
static uint8_t
|
|
bxe_rxeof(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp)
|
|
{
|
|
if_t ifp = sc->ifp;
|
|
uint16_t bd_cons, bd_prod, bd_prod_fw, comp_ring_cons;
|
|
uint16_t hw_cq_cons, sw_cq_cons, sw_cq_prod;
|
|
int rx_pkts = 0;
|
|
int rc;
|
|
|
|
BXE_FP_RX_LOCK(fp);
|
|
|
|
/* CQ "next element" is of the size of the regular element */
|
|
hw_cq_cons = le16toh(*fp->rx_cq_cons_sb);
|
|
if ((hw_cq_cons & RCQ_USABLE_PER_PAGE) == RCQ_USABLE_PER_PAGE) {
|
|
hw_cq_cons++;
|
|
}
|
|
|
|
bd_cons = fp->rx_bd_cons;
|
|
bd_prod = fp->rx_bd_prod;
|
|
bd_prod_fw = bd_prod;
|
|
sw_cq_cons = fp->rx_cq_cons;
|
|
sw_cq_prod = fp->rx_cq_prod;
|
|
|
|
/*
|
|
* Memory barrier necessary as speculative reads of the rx
|
|
* buffer can be ahead of the index in the status block
|
|
*/
|
|
rmb();
|
|
|
|
BLOGD(sc, DBG_RX,
|
|
"fp[%02d] Rx START hw_cq_cons=%u sw_cq_cons=%u\n",
|
|
fp->index, hw_cq_cons, sw_cq_cons);
|
|
|
|
while (sw_cq_cons != hw_cq_cons) {
|
|
struct bxe_sw_rx_bd *rx_buf = NULL;
|
|
union eth_rx_cqe *cqe;
|
|
struct eth_fast_path_rx_cqe *cqe_fp;
|
|
uint8_t cqe_fp_flags;
|
|
enum eth_rx_cqe_type cqe_fp_type;
|
|
uint16_t len, pad;
|
|
struct mbuf *m = NULL;
|
|
|
|
comp_ring_cons = RCQ(sw_cq_cons);
|
|
bd_prod = RX_BD(bd_prod);
|
|
bd_cons = RX_BD(bd_cons);
|
|
|
|
cqe = &fp->rcq_chain[comp_ring_cons];
|
|
cqe_fp = &cqe->fast_path_cqe;
|
|
cqe_fp_flags = cqe_fp->type_error_flags;
|
|
cqe_fp_type = cqe_fp_flags & ETH_FAST_PATH_RX_CQE_TYPE;
|
|
|
|
BLOGD(sc, DBG_RX,
|
|
"fp[%02d] Rx hw_cq_cons=%d hw_sw_cons=%d "
|
|
"BD prod=%d cons=%d CQE type=0x%x err=0x%x "
|
|
"status=0x%x rss_hash=0x%x vlan=0x%x len=%u\n",
|
|
fp->index,
|
|
hw_cq_cons,
|
|
sw_cq_cons,
|
|
bd_prod,
|
|
bd_cons,
|
|
CQE_TYPE(cqe_fp_flags),
|
|
cqe_fp_flags,
|
|
cqe_fp->status_flags,
|
|
le32toh(cqe_fp->rss_hash_result),
|
|
le16toh(cqe_fp->vlan_tag),
|
|
le16toh(cqe_fp->pkt_len_or_gro_seg_len));
|
|
|
|
/* is this a slowpath msg? */
|
|
if (__predict_false(CQE_TYPE_SLOW(cqe_fp_type))) {
|
|
bxe_sp_event(sc, fp, cqe);
|
|
goto next_cqe;
|
|
}
|
|
|
|
rx_buf = &fp->rx_mbuf_chain[bd_cons];
|
|
|
|
if (!CQE_TYPE_FAST(cqe_fp_type)) {
|
|
struct bxe_sw_tpa_info *tpa_info;
|
|
uint16_t frag_size, pages;
|
|
uint8_t queue;
|
|
|
|
#if 0
|
|
/* sanity check */
|
|
if (!fp->tpa_enable &&
|
|
(CQE_TYPE_START(cqe_fp_type) || CQE_TYPE_STOP(cqe_fp_type))) {
|
|
BLOGE(sc, "START/STOP packet while !tpa_enable type (0x%x)\n",
|
|
CQE_TYPE(cqe_fp_type));
|
|
}
|
|
#endif
|
|
|
|
if (CQE_TYPE_START(cqe_fp_type)) {
|
|
bxe_tpa_start(sc, fp, cqe_fp->queue_index,
|
|
bd_cons, bd_prod, cqe_fp);
|
|
m = NULL; /* packet not ready yet */
|
|
goto next_rx;
|
|
}
|
|
|
|
KASSERT(CQE_TYPE_STOP(cqe_fp_type),
|
|
("CQE type is not STOP! (0x%x)\n", cqe_fp_type));
|
|
|
|
queue = cqe->end_agg_cqe.queue_index;
|
|
tpa_info = &fp->rx_tpa_info[queue];
|
|
|
|
BLOGD(sc, DBG_LRO, "fp[%02d].tpa[%02d] TPA STOP\n",
|
|
fp->index, queue);
|
|
|
|
frag_size = (le16toh(cqe->end_agg_cqe.pkt_len) -
|
|
tpa_info->len_on_bd);
|
|
pages = SGE_PAGE_ALIGN(frag_size) >> SGE_PAGE_SHIFT;
|
|
|
|
bxe_tpa_stop(sc, fp, tpa_info, queue, pages,
|
|
&cqe->end_agg_cqe, comp_ring_cons);
|
|
|
|
bxe_update_sge_prod(sc, fp, pages, &cqe->end_agg_cqe);
|
|
|
|
goto next_cqe;
|
|
}
|
|
|
|
/* non TPA */
|
|
|
|
/* is this an error packet? */
|
|
if (__predict_false(cqe_fp_flags &
|
|
ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG)) {
|
|
BLOGE(sc, "flags 0x%x rx packet %u\n", cqe_fp_flags, sw_cq_cons);
|
|
fp->eth_q_stats.rx_soft_errors++;
|
|
goto next_rx;
|
|
}
|
|
|
|
len = le16toh(cqe_fp->pkt_len_or_gro_seg_len);
|
|
pad = cqe_fp->placement_offset;
|
|
|
|
m = rx_buf->m;
|
|
|
|
if (__predict_false(m == NULL)) {
|
|
BLOGE(sc, "No mbuf in rx chain descriptor %d for fp[%02d]\n",
|
|
bd_cons, fp->index);
|
|
goto next_rx;
|
|
}
|
|
|
|
/* XXX double copy if packet length under a threshold */
|
|
|
|
/*
|
|
* If all the buffer descriptors are filled with mbufs then fill in
|
|
* the current consumer index with a new BD. Else if a maximum Rx
|
|
* buffer limit is imposed then fill in the next producer index.
|
|
*/
|
|
rc = bxe_alloc_rx_bd_mbuf(fp, bd_cons,
|
|
(sc->max_rx_bufs != RX_BD_USABLE) ?
|
|
bd_prod : bd_cons);
|
|
if (rc != 0) {
|
|
BLOGE(sc, "mbuf alloc fail for fp[%02d] rx chain (%d)\n",
|
|
fp->index, rc);
|
|
fp->eth_q_stats.rx_soft_errors++;
|
|
|
|
if (sc->max_rx_bufs != RX_BD_USABLE) {
|
|
/* copy this consumer index to the producer index */
|
|
memcpy(&fp->rx_mbuf_chain[bd_prod], rx_buf,
|
|
sizeof(struct bxe_sw_rx_bd));
|
|
memset(rx_buf, 0, sizeof(struct bxe_sw_rx_bd));
|
|
}
|
|
|
|
goto next_rx;
|
|
}
|
|
|
|
/* current mbuf was detached from the bd */
|
|
fp->eth_q_stats.mbuf_alloc_rx--;
|
|
|
|
/* we allocated a replacement mbuf, fixup the current one */
|
|
m_adj(m, pad);
|
|
m->m_pkthdr.len = m->m_len = len;
|
|
|
|
/* assign packet to this interface interface */
|
|
if_setrcvif(m, ifp);
|
|
|
|
/* assume no hardware checksum has complated */
|
|
m->m_pkthdr.csum_flags = 0;
|
|
|
|
/* validate checksum if offload enabled */
|
|
if (if_getcapenable(ifp) & IFCAP_RXCSUM) {
|
|
/* check for a valid IP frame */
|
|
if (!(cqe->fast_path_cqe.status_flags &
|
|
ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG)) {
|
|
m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
|
|
if (__predict_false(cqe_fp_flags &
|
|
ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG)) {
|
|
fp->eth_q_stats.rx_hw_csum_errors++;
|
|
} else {
|
|
fp->eth_q_stats.rx_ofld_frames_csum_ip++;
|
|
m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
|
|
}
|
|
}
|
|
|
|
/* check for a valid TCP/UDP frame */
|
|
if (!(cqe->fast_path_cqe.status_flags &
|
|
ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG)) {
|
|
if (__predict_false(cqe_fp_flags &
|
|
ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG)) {
|
|
fp->eth_q_stats.rx_hw_csum_errors++;
|
|
} else {
|
|
fp->eth_q_stats.rx_ofld_frames_csum_tcp_udp++;
|
|
m->m_pkthdr.csum_data = 0xFFFF;
|
|
m->m_pkthdr.csum_flags |= (CSUM_DATA_VALID |
|
|
CSUM_PSEUDO_HDR);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* if there is a VLAN tag then flag that info */
|
|
if (cqe->fast_path_cqe.pars_flags.flags & PARSING_FLAGS_VLAN) {
|
|
m->m_pkthdr.ether_vtag = cqe->fast_path_cqe.vlan_tag;
|
|
m->m_flags |= M_VLANTAG;
|
|
}
|
|
|
|
#if __FreeBSD_version >= 800000
|
|
/* specify what RSS queue was used for this flow */
|
|
m->m_pkthdr.flowid = fp->index;
|
|
m->m_flags |= M_FLOWID;
|
|
#endif
|
|
|
|
next_rx:
|
|
|
|
bd_cons = RX_BD_NEXT(bd_cons);
|
|
bd_prod = RX_BD_NEXT(bd_prod);
|
|
bd_prod_fw = RX_BD_NEXT(bd_prod_fw);
|
|
|
|
/* pass the frame to the stack */
|
|
if (__predict_true(m != NULL)) {
|
|
if_incipackets(ifp, 1);
|
|
rx_pkts++;
|
|
if_input(ifp, m);
|
|
}
|
|
|
|
next_cqe:
|
|
|
|
sw_cq_prod = RCQ_NEXT(sw_cq_prod);
|
|
sw_cq_cons = RCQ_NEXT(sw_cq_cons);
|
|
|
|
/* limit spinning on the queue */
|
|
if (rx_pkts == sc->rx_budget) {
|
|
fp->eth_q_stats.rx_budget_reached++;
|
|
break;
|
|
}
|
|
} /* while work to do */
|
|
|
|
fp->rx_bd_cons = bd_cons;
|
|
fp->rx_bd_prod = bd_prod_fw;
|
|
fp->rx_cq_cons = sw_cq_cons;
|
|
fp->rx_cq_prod = sw_cq_prod;
|
|
|
|
/* Update producers */
|
|
bxe_update_rx_prod(sc, fp, bd_prod_fw, sw_cq_prod, fp->rx_sge_prod);
|
|
|
|
fp->eth_q_stats.rx_pkts += rx_pkts;
|
|
fp->eth_q_stats.rx_calls++;
|
|
|
|
BXE_FP_RX_UNLOCK(fp);
|
|
|
|
return (sw_cq_cons != hw_cq_cons);
|
|
}
|
|
|
|
static uint16_t
|
|
bxe_free_tx_pkt(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp,
|
|
uint16_t idx)
|
|
{
|
|
struct bxe_sw_tx_bd *tx_buf = &fp->tx_mbuf_chain[idx];
|
|
struct eth_tx_start_bd *tx_start_bd;
|
|
uint16_t bd_idx = TX_BD(tx_buf->first_bd);
|
|
uint16_t new_cons;
|
|
int nbd;
|
|
|
|
/* unmap the mbuf from non-paged memory */
|
|
bus_dmamap_unload(fp->tx_mbuf_tag, tx_buf->m_map);
|
|
|
|
tx_start_bd = &fp->tx_chain[bd_idx].start_bd;
|
|
nbd = le16toh(tx_start_bd->nbd) - 1;
|
|
|
|
#if 0
|
|
if ((nbd - 1) > (MAX_MBUF_FRAGS + 2)) {
|
|
bxe_panic(sc, ("BAD nbd!\n"));
|
|
}
|
|
#endif
|
|
|
|
new_cons = (tx_buf->first_bd + nbd);
|
|
|
|
#if 0
|
|
struct eth_tx_bd *tx_data_bd;
|
|
|
|
/*
|
|
* The following code doesn't do anything but is left here
|
|
* for clarity on what the new value of new_cons skipped.
|
|
*/
|
|
|
|
/* get the next bd */
|
|
bd_idx = TX_BD(TX_BD_NEXT(bd_idx));
|
|
|
|
/* skip the parse bd */
|
|
--nbd;
|
|
bd_idx = TX_BD(TX_BD_NEXT(bd_idx));
|
|
|
|
/* skip the TSO split header bd since they have no mapping */
|
|
if (tx_buf->flags & BXE_TSO_SPLIT_BD) {
|
|
--nbd;
|
|
bd_idx = TX_BD(TX_BD_NEXT(bd_idx));
|
|
}
|
|
|
|
/* now free frags */
|
|
while (nbd > 0) {
|
|
tx_data_bd = &fp->tx_chain[bd_idx].reg_bd;
|
|
if (--nbd) {
|
|
bd_idx = TX_BD(TX_BD_NEXT(bd_idx));
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* free the mbuf */
|
|
if (__predict_true(tx_buf->m != NULL)) {
|
|
m_freem(tx_buf->m);
|
|
fp->eth_q_stats.mbuf_alloc_tx--;
|
|
} else {
|
|
fp->eth_q_stats.tx_chain_lost_mbuf++;
|
|
}
|
|
|
|
tx_buf->m = NULL;
|
|
tx_buf->first_bd = 0;
|
|
|
|
return (new_cons);
|
|
}
|
|
|
|
/* transmit timeout watchdog */
|
|
static int
|
|
bxe_watchdog(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp)
|
|
{
|
|
BXE_FP_TX_LOCK(fp);
|
|
|
|
if ((fp->watchdog_timer == 0) || (--fp->watchdog_timer)) {
|
|
BXE_FP_TX_UNLOCK(fp);
|
|
return (0);
|
|
}
|
|
|
|
BLOGE(sc, "TX watchdog timeout on fp[%02d], resetting!\n", fp->index);
|
|
|
|
BXE_FP_TX_UNLOCK(fp);
|
|
|
|
atomic_store_rel_long(&sc->chip_tq_flags, CHIP_TQ_REINIT);
|
|
taskqueue_enqueue(sc->chip_tq, &sc->chip_tq_task);
|
|
|
|
return (-1);
|
|
}
|
|
|
|
/* processes transmit completions */
|
|
static uint8_t
|
|
bxe_txeof(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp)
|
|
{
|
|
if_t ifp = sc->ifp;
|
|
uint16_t bd_cons, hw_cons, sw_cons, pkt_cons;
|
|
uint16_t tx_bd_avail;
|
|
|
|
BXE_FP_TX_LOCK_ASSERT(fp);
|
|
|
|
bd_cons = fp->tx_bd_cons;
|
|
hw_cons = le16toh(*fp->tx_cons_sb);
|
|
sw_cons = fp->tx_pkt_cons;
|
|
|
|
while (sw_cons != hw_cons) {
|
|
pkt_cons = TX_BD(sw_cons);
|
|
|
|
BLOGD(sc, DBG_TX,
|
|
"TX: fp[%d]: hw_cons=%u sw_cons=%u pkt_cons=%u\n",
|
|
fp->index, hw_cons, sw_cons, pkt_cons);
|
|
|
|
bd_cons = bxe_free_tx_pkt(sc, fp, pkt_cons);
|
|
|
|
sw_cons++;
|
|
}
|
|
|
|
fp->tx_pkt_cons = sw_cons;
|
|
fp->tx_bd_cons = bd_cons;
|
|
|
|
BLOGD(sc, DBG_TX,
|
|
"TX done: fp[%d]: hw_cons=%u sw_cons=%u sw_prod=%u\n",
|
|
fp->index, hw_cons, fp->tx_pkt_cons, fp->tx_pkt_prod);
|
|
|
|
mb();
|
|
|
|
tx_bd_avail = bxe_tx_avail(sc, fp);
|
|
|
|
if (tx_bd_avail < BXE_TX_CLEANUP_THRESHOLD) {
|
|
if_setdrvflagbits(ifp, IFF_DRV_OACTIVE, 0);
|
|
} else {
|
|
if_setdrvflagbits(ifp, 0, IFF_DRV_OACTIVE);
|
|
}
|
|
|
|
if (fp->tx_pkt_prod != fp->tx_pkt_cons) {
|
|
/* reset the watchdog timer if there are pending transmits */
|
|
fp->watchdog_timer = BXE_TX_TIMEOUT;
|
|
return (TRUE);
|
|
} else {
|
|
/* clear watchdog when there are no pending transmits */
|
|
fp->watchdog_timer = 0;
|
|
return (FALSE);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_drain_tx_queues(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_fastpath *fp;
|
|
int i, count;
|
|
|
|
/* wait until all TX fastpath tasks have completed */
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
|
|
count = 1000;
|
|
|
|
while (bxe_has_tx_work(fp)) {
|
|
|
|
BXE_FP_TX_LOCK(fp);
|
|
bxe_txeof(sc, fp);
|
|
BXE_FP_TX_UNLOCK(fp);
|
|
|
|
if (count == 0) {
|
|
BLOGE(sc, "Timeout waiting for fp[%d] "
|
|
"transmits to complete!\n", i);
|
|
bxe_panic(sc, ("tx drain failure\n"));
|
|
return;
|
|
}
|
|
|
|
count--;
|
|
DELAY(1000);
|
|
rmb();
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
bxe_del_all_macs(struct bxe_softc *sc,
|
|
struct ecore_vlan_mac_obj *mac_obj,
|
|
int mac_type,
|
|
uint8_t wait_for_comp)
|
|
{
|
|
unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
|
|
int rc;
|
|
|
|
/* wait for completion of requested */
|
|
if (wait_for_comp) {
|
|
bxe_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
|
|
}
|
|
|
|
/* Set the mac type of addresses we want to clear */
|
|
bxe_set_bit(mac_type, &vlan_mac_flags);
|
|
|
|
rc = mac_obj->delete_all(sc, mac_obj, &vlan_mac_flags, &ramrod_flags);
|
|
if (rc < 0) {
|
|
BLOGE(sc, "Failed to delete MACs (%d)\n", rc);
|
|
}
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static int
|
|
bxe_fill_accept_flags(struct bxe_softc *sc,
|
|
uint32_t rx_mode,
|
|
unsigned long *rx_accept_flags,
|
|
unsigned long *tx_accept_flags)
|
|
{
|
|
/* Clear the flags first */
|
|
*rx_accept_flags = 0;
|
|
*tx_accept_flags = 0;
|
|
|
|
switch (rx_mode) {
|
|
case BXE_RX_MODE_NONE:
|
|
/*
|
|
* 'drop all' supersedes any accept flags that may have been
|
|
* passed to the function.
|
|
*/
|
|
break;
|
|
|
|
case BXE_RX_MODE_NORMAL:
|
|
bxe_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
|
|
bxe_set_bit(ECORE_ACCEPT_MULTICAST, rx_accept_flags);
|
|
bxe_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
|
|
|
|
/* internal switching mode */
|
|
bxe_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
|
|
bxe_set_bit(ECORE_ACCEPT_MULTICAST, tx_accept_flags);
|
|
bxe_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
|
|
|
|
break;
|
|
|
|
case BXE_RX_MODE_ALLMULTI:
|
|
bxe_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
|
|
bxe_set_bit(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
|
|
bxe_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
|
|
|
|
/* internal switching mode */
|
|
bxe_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
|
|
bxe_set_bit(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
|
|
bxe_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
|
|
|
|
break;
|
|
|
|
case BXE_RX_MODE_PROMISC:
|
|
/*
|
|
* According to deffinition of SI mode, iface in promisc mode
|
|
* should receive matched and unmatched (in resolution of port)
|
|
* unicast packets.
|
|
*/
|
|
bxe_set_bit(ECORE_ACCEPT_UNMATCHED, rx_accept_flags);
|
|
bxe_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
|
|
bxe_set_bit(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
|
|
bxe_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
|
|
|
|
/* internal switching mode */
|
|
bxe_set_bit(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
|
|
bxe_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
|
|
|
|
if (IS_MF_SI(sc)) {
|
|
bxe_set_bit(ECORE_ACCEPT_ALL_UNICAST, tx_accept_flags);
|
|
} else {
|
|
bxe_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
BLOGE(sc, "Unknown rx_mode (%d)\n", rx_mode);
|
|
return (-1);
|
|
}
|
|
|
|
/* Set ACCEPT_ANY_VLAN as we do not enable filtering by VLAN */
|
|
if (rx_mode != BXE_RX_MODE_NONE) {
|
|
bxe_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags);
|
|
bxe_set_bit(ECORE_ACCEPT_ANY_VLAN, tx_accept_flags);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bxe_set_q_rx_mode(struct bxe_softc *sc,
|
|
uint8_t cl_id,
|
|
unsigned long rx_mode_flags,
|
|
unsigned long rx_accept_flags,
|
|
unsigned long tx_accept_flags,
|
|
unsigned long ramrod_flags)
|
|
{
|
|
struct ecore_rx_mode_ramrod_params ramrod_param;
|
|
int rc;
|
|
|
|
memset(&ramrod_param, 0, sizeof(ramrod_param));
|
|
|
|
/* Prepare ramrod parameters */
|
|
ramrod_param.cid = 0;
|
|
ramrod_param.cl_id = cl_id;
|
|
ramrod_param.rx_mode_obj = &sc->rx_mode_obj;
|
|
ramrod_param.func_id = SC_FUNC(sc);
|
|
|
|
ramrod_param.pstate = &sc->sp_state;
|
|
ramrod_param.state = ECORE_FILTER_RX_MODE_PENDING;
|
|
|
|
ramrod_param.rdata = BXE_SP(sc, rx_mode_rdata);
|
|
ramrod_param.rdata_mapping = BXE_SP_MAPPING(sc, rx_mode_rdata);
|
|
|
|
bxe_set_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);
|
|
|
|
ramrod_param.ramrod_flags = ramrod_flags;
|
|
ramrod_param.rx_mode_flags = rx_mode_flags;
|
|
|
|
ramrod_param.rx_accept_flags = rx_accept_flags;
|
|
ramrod_param.tx_accept_flags = tx_accept_flags;
|
|
|
|
rc = ecore_config_rx_mode(sc, &ramrod_param);
|
|
if (rc < 0) {
|
|
BLOGE(sc, "Set rx_mode %d failed\n", sc->rx_mode);
|
|
return (rc);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bxe_set_storm_rx_mode(struct bxe_softc *sc)
|
|
{
|
|
unsigned long rx_mode_flags = 0, ramrod_flags = 0;
|
|
unsigned long rx_accept_flags = 0, tx_accept_flags = 0;
|
|
int rc;
|
|
|
|
rc = bxe_fill_accept_flags(sc, sc->rx_mode, &rx_accept_flags,
|
|
&tx_accept_flags);
|
|
if (rc) {
|
|
return (rc);
|
|
}
|
|
|
|
bxe_set_bit(RAMROD_RX, &ramrod_flags);
|
|
bxe_set_bit(RAMROD_TX, &ramrod_flags);
|
|
|
|
/* XXX ensure all fastpath have same cl_id and/or move it to bxe_softc */
|
|
return (bxe_set_q_rx_mode(sc, sc->fp[0].cl_id, rx_mode_flags,
|
|
rx_accept_flags, tx_accept_flags,
|
|
ramrod_flags));
|
|
}
|
|
|
|
/* returns the "mcp load_code" according to global load_count array */
|
|
static int
|
|
bxe_nic_load_no_mcp(struct bxe_softc *sc)
|
|
{
|
|
int path = SC_PATH(sc);
|
|
int port = SC_PORT(sc);
|
|
|
|
BLOGI(sc, "NO MCP - load counts[%d] %d, %d, %d\n",
|
|
path, load_count[path][0], load_count[path][1],
|
|
load_count[path][2]);
|
|
load_count[path][0]++;
|
|
load_count[path][1 + port]++;
|
|
BLOGI(sc, "NO MCP - new load counts[%d] %d, %d, %d\n",
|
|
path, load_count[path][0], load_count[path][1],
|
|
load_count[path][2]);
|
|
if (load_count[path][0] == 1) {
|
|
return (FW_MSG_CODE_DRV_LOAD_COMMON);
|
|
} else if (load_count[path][1 + port] == 1) {
|
|
return (FW_MSG_CODE_DRV_LOAD_PORT);
|
|
} else {
|
|
return (FW_MSG_CODE_DRV_LOAD_FUNCTION);
|
|
}
|
|
}
|
|
|
|
/* returns the "mcp load_code" according to global load_count array */
|
|
static int
|
|
bxe_nic_unload_no_mcp(struct bxe_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int path = SC_PATH(sc);
|
|
|
|
BLOGI(sc, "NO MCP - load counts[%d] %d, %d, %d\n",
|
|
path, load_count[path][0], load_count[path][1],
|
|
load_count[path][2]);
|
|
load_count[path][0]--;
|
|
load_count[path][1 + port]--;
|
|
BLOGI(sc, "NO MCP - new load counts[%d] %d, %d, %d\n",
|
|
path, load_count[path][0], load_count[path][1],
|
|
load_count[path][2]);
|
|
if (load_count[path][0] == 0) {
|
|
return (FW_MSG_CODE_DRV_UNLOAD_COMMON);
|
|
} else if (load_count[path][1 + port] == 0) {
|
|
return (FW_MSG_CODE_DRV_UNLOAD_PORT);
|
|
} else {
|
|
return (FW_MSG_CODE_DRV_UNLOAD_FUNCTION);
|
|
}
|
|
}
|
|
|
|
/* request unload mode from the MCP: COMMON, PORT or FUNCTION */
|
|
static uint32_t
|
|
bxe_send_unload_req(struct bxe_softc *sc,
|
|
int unload_mode)
|
|
{
|
|
uint32_t reset_code = 0;
|
|
#if 0
|
|
int port = SC_PORT(sc);
|
|
int path = SC_PATH(sc);
|
|
#endif
|
|
|
|
/* Select the UNLOAD request mode */
|
|
if (unload_mode == UNLOAD_NORMAL) {
|
|
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
|
|
}
|
|
#if 0
|
|
else if (sc->flags & BXE_NO_WOL_FLAG) {
|
|
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP;
|
|
} else if (sc->wol) {
|
|
uint32_t emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
|
|
uint8_t *mac_addr = sc->dev->dev_addr;
|
|
uint32_t val;
|
|
uint16_t pmc;
|
|
|
|
/*
|
|
* The mac address is written to entries 1-4 to
|
|
* preserve entry 0 which is used by the PMF
|
|
*/
|
|
uint8_t entry = (SC_VN(sc) + 1)*8;
|
|
|
|
val = (mac_addr[0] << 8) | mac_addr[1];
|
|
EMAC_WR(sc, EMAC_REG_EMAC_MAC_MATCH + entry, val);
|
|
|
|
val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
|
|
(mac_addr[4] << 8) | mac_addr[5];
|
|
EMAC_WR(sc, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val);
|
|
|
|
/* Enable the PME and clear the status */
|
|
pmc = pci_read_config(sc->dev,
|
|
(sc->devinfo.pcie_pm_cap_reg +
|
|
PCIR_POWER_STATUS),
|
|
2);
|
|
pmc |= PCIM_PSTAT_PMEENABLE | PCIM_PSTAT_PME;
|
|
pci_write_config(sc->dev,
|
|
(sc->devinfo.pcie_pm_cap_reg +
|
|
PCIR_POWER_STATUS),
|
|
pmc, 4);
|
|
|
|
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
|
|
}
|
|
#endif
|
|
else {
|
|
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
|
|
}
|
|
|
|
/* Send the request to the MCP */
|
|
if (!BXE_NOMCP(sc)) {
|
|
reset_code = bxe_fw_command(sc, reset_code, 0);
|
|
} else {
|
|
reset_code = bxe_nic_unload_no_mcp(sc);
|
|
}
|
|
|
|
return (reset_code);
|
|
}
|
|
|
|
/* send UNLOAD_DONE command to the MCP */
|
|
static void
|
|
bxe_send_unload_done(struct bxe_softc *sc,
|
|
uint8_t keep_link)
|
|
{
|
|
uint32_t reset_param =
|
|
keep_link ? DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET : 0;
|
|
|
|
/* Report UNLOAD_DONE to MCP */
|
|
if (!BXE_NOMCP(sc)) {
|
|
bxe_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, reset_param);
|
|
}
|
|
}
|
|
|
|
static int
|
|
bxe_func_wait_started(struct bxe_softc *sc)
|
|
{
|
|
int tout = 50;
|
|
|
|
if (!sc->port.pmf) {
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* (assumption: No Attention from MCP at this stage)
|
|
* PMF probably in the middle of TX disable/enable transaction
|
|
* 1. Sync IRS for default SB
|
|
* 2. Sync SP queue - this guarantees us that attention handling started
|
|
* 3. Wait, that TX disable/enable transaction completes
|
|
*
|
|
* 1+2 guarantee that if DCBX attention was scheduled it already changed
|
|
* pending bit of transaction from STARTED-->TX_STOPPED, if we already
|
|
* received completion for the transaction the state is TX_STOPPED.
|
|
* State will return to STARTED after completion of TX_STOPPED-->STARTED
|
|
* transaction.
|
|
*/
|
|
|
|
/* XXX make sure default SB ISR is done */
|
|
/* need a way to synchronize an irq (intr_mtx?) */
|
|
|
|
/* XXX flush any work queues */
|
|
|
|
while (ecore_func_get_state(sc, &sc->func_obj) !=
|
|
ECORE_F_STATE_STARTED && tout--) {
|
|
DELAY(20000);
|
|
}
|
|
|
|
if (ecore_func_get_state(sc, &sc->func_obj) != ECORE_F_STATE_STARTED) {
|
|
/*
|
|
* Failed to complete the transaction in a "good way"
|
|
* Force both transactions with CLR bit.
|
|
*/
|
|
struct ecore_func_state_params func_params = { NULL };
|
|
|
|
BLOGE(sc, "Unexpected function state! "
|
|
"Forcing STARTED-->TX_STOPPED-->STARTED\n");
|
|
|
|
func_params.f_obj = &sc->func_obj;
|
|
bxe_set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
|
|
|
|
/* STARTED-->TX_STOPPED */
|
|
func_params.cmd = ECORE_F_CMD_TX_STOP;
|
|
ecore_func_state_change(sc, &func_params);
|
|
|
|
/* TX_STOPPED-->STARTED */
|
|
func_params.cmd = ECORE_F_CMD_TX_START;
|
|
return (ecore_func_state_change(sc, &func_params));
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bxe_stop_queue(struct bxe_softc *sc,
|
|
int index)
|
|
{
|
|
struct bxe_fastpath *fp = &sc->fp[index];
|
|
struct ecore_queue_state_params q_params = { NULL };
|
|
int rc;
|
|
|
|
BLOGD(sc, DBG_LOAD, "stopping queue %d cid %d\n", index, fp->index);
|
|
|
|
q_params.q_obj = &sc->sp_objs[fp->index].q_obj;
|
|
/* We want to wait for completion in this context */
|
|
bxe_set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
|
|
|
|
/* Stop the primary connection: */
|
|
|
|
/* ...halt the connection */
|
|
q_params.cmd = ECORE_Q_CMD_HALT;
|
|
rc = ecore_queue_state_change(sc, &q_params);
|
|
if (rc) {
|
|
return (rc);
|
|
}
|
|
|
|
/* ...terminate the connection */
|
|
q_params.cmd = ECORE_Q_CMD_TERMINATE;
|
|
memset(&q_params.params.terminate, 0, sizeof(q_params.params.terminate));
|
|
q_params.params.terminate.cid_index = FIRST_TX_COS_INDEX;
|
|
rc = ecore_queue_state_change(sc, &q_params);
|
|
if (rc) {
|
|
return (rc);
|
|
}
|
|
|
|
/* ...delete cfc entry */
|
|
q_params.cmd = ECORE_Q_CMD_CFC_DEL;
|
|
memset(&q_params.params.cfc_del, 0, sizeof(q_params.params.cfc_del));
|
|
q_params.params.cfc_del.cid_index = FIRST_TX_COS_INDEX;
|
|
return (ecore_queue_state_change(sc, &q_params));
|
|
}
|
|
|
|
/* wait for the outstanding SP commands */
|
|
static inline uint8_t
|
|
bxe_wait_sp_comp(struct bxe_softc *sc,
|
|
unsigned long mask)
|
|
{
|
|
unsigned long tmp;
|
|
int tout = 5000; /* wait for 5 secs tops */
|
|
|
|
while (tout--) {
|
|
mb();
|
|
if (!(atomic_load_acq_long(&sc->sp_state) & mask)) {
|
|
return (TRUE);
|
|
}
|
|
|
|
DELAY(1000);
|
|
}
|
|
|
|
mb();
|
|
|
|
tmp = atomic_load_acq_long(&sc->sp_state);
|
|
if (tmp & mask) {
|
|
BLOGE(sc, "Filtering completion timed out: "
|
|
"sp_state 0x%lx, mask 0x%lx\n",
|
|
tmp, mask);
|
|
return (FALSE);
|
|
}
|
|
|
|
return (FALSE);
|
|
}
|
|
|
|
static int
|
|
bxe_func_stop(struct bxe_softc *sc)
|
|
{
|
|
struct ecore_func_state_params func_params = { NULL };
|
|
int rc;
|
|
|
|
/* prepare parameters for function state transitions */
|
|
bxe_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
|
|
func_params.f_obj = &sc->func_obj;
|
|
func_params.cmd = ECORE_F_CMD_STOP;
|
|
|
|
/*
|
|
* Try to stop the function the 'good way'. If it fails (in case
|
|
* of a parity error during bxe_chip_cleanup()) and we are
|
|
* not in a debug mode, perform a state transaction in order to
|
|
* enable further HW_RESET transaction.
|
|
*/
|
|
rc = ecore_func_state_change(sc, &func_params);
|
|
if (rc) {
|
|
BLOGE(sc, "FUNC_STOP ramrod failed. "
|
|
"Running a dry transaction\n");
|
|
bxe_set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
|
|
return (ecore_func_state_change(sc, &func_params));
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bxe_reset_hw(struct bxe_softc *sc,
|
|
uint32_t load_code)
|
|
{
|
|
struct ecore_func_state_params func_params = { NULL };
|
|
|
|
/* Prepare parameters for function state transitions */
|
|
bxe_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
|
|
|
|
func_params.f_obj = &sc->func_obj;
|
|
func_params.cmd = ECORE_F_CMD_HW_RESET;
|
|
|
|
func_params.params.hw_init.load_phase = load_code;
|
|
|
|
return (ecore_func_state_change(sc, &func_params));
|
|
}
|
|
|
|
static void
|
|
bxe_int_disable_sync(struct bxe_softc *sc,
|
|
int disable_hw)
|
|
{
|
|
if (disable_hw) {
|
|
/* prevent the HW from sending interrupts */
|
|
bxe_int_disable(sc);
|
|
}
|
|
|
|
/* XXX need a way to synchronize ALL irqs (intr_mtx?) */
|
|
/* make sure all ISRs are done */
|
|
|
|
/* XXX make sure sp_task is not running */
|
|
/* cancel and flush work queues */
|
|
}
|
|
|
|
static void
|
|
bxe_chip_cleanup(struct bxe_softc *sc,
|
|
uint32_t unload_mode,
|
|
uint8_t keep_link)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
struct ecore_mcast_ramrod_params rparam = { NULL };
|
|
uint32_t reset_code;
|
|
int i, rc = 0;
|
|
|
|
bxe_drain_tx_queues(sc);
|
|
|
|
/* give HW time to discard old tx messages */
|
|
DELAY(1000);
|
|
|
|
/* Clean all ETH MACs */
|
|
rc = bxe_del_all_macs(sc, &sc->sp_objs[0].mac_obj, ECORE_ETH_MAC, FALSE);
|
|
if (rc < 0) {
|
|
BLOGE(sc, "Failed to delete all ETH MACs (%d)\n", rc);
|
|
}
|
|
|
|
/* Clean up UC list */
|
|
rc = bxe_del_all_macs(sc, &sc->sp_objs[0].mac_obj, ECORE_UC_LIST_MAC, TRUE);
|
|
if (rc < 0) {
|
|
BLOGE(sc, "Failed to delete UC MACs list (%d)\n", rc);
|
|
}
|
|
|
|
/* Disable LLH */
|
|
if (!CHIP_IS_E1(sc)) {
|
|
REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port*8, 0);
|
|
}
|
|
|
|
/* Set "drop all" to stop Rx */
|
|
|
|
/*
|
|
* We need to take the BXE_MCAST_LOCK() here in order to prevent
|
|
* a race between the completion code and this code.
|
|
*/
|
|
BXE_MCAST_LOCK(sc);
|
|
|
|
if (bxe_test_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state)) {
|
|
bxe_set_bit(ECORE_FILTER_RX_MODE_SCHED, &sc->sp_state);
|
|
} else {
|
|
bxe_set_storm_rx_mode(sc);
|
|
}
|
|
|
|
/* Clean up multicast configuration */
|
|
rparam.mcast_obj = &sc->mcast_obj;
|
|
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_DEL);
|
|
if (rc < 0) {
|
|
BLOGE(sc, "Failed to send DEL MCAST command (%d)\n", rc);
|
|
}
|
|
|
|
BXE_MCAST_UNLOCK(sc);
|
|
|
|
// XXX bxe_iov_chip_cleanup(sc);
|
|
|
|
/*
|
|
* Send the UNLOAD_REQUEST to the MCP. This will return if
|
|
* this function should perform FUNCTION, PORT, or COMMON HW
|
|
* reset.
|
|
*/
|
|
reset_code = bxe_send_unload_req(sc, unload_mode);
|
|
|
|
/*
|
|
* (assumption: No Attention from MCP at this stage)
|
|
* PMF probably in the middle of TX disable/enable transaction
|
|
*/
|
|
rc = bxe_func_wait_started(sc);
|
|
if (rc) {
|
|
BLOGE(sc, "bxe_func_wait_started failed\n");
|
|
}
|
|
|
|
/*
|
|
* Close multi and leading connections
|
|
* Completions for ramrods are collected in a synchronous way
|
|
*/
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
if (bxe_stop_queue(sc, i)) {
|
|
goto unload_error;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If SP settings didn't get completed so far - something
|
|
* very wrong has happen.
|
|
*/
|
|
if (!bxe_wait_sp_comp(sc, ~0x0UL)) {
|
|
BLOGE(sc, "Common slow path ramrods got stuck!\n");
|
|
}
|
|
|
|
unload_error:
|
|
|
|
rc = bxe_func_stop(sc);
|
|
if (rc) {
|
|
BLOGE(sc, "Function stop failed!\n");
|
|
}
|
|
|
|
/* disable HW interrupts */
|
|
bxe_int_disable_sync(sc, TRUE);
|
|
|
|
/* detach interrupts */
|
|
bxe_interrupt_detach(sc);
|
|
|
|
/* Reset the chip */
|
|
rc = bxe_reset_hw(sc, reset_code);
|
|
if (rc) {
|
|
BLOGE(sc, "Hardware reset failed\n");
|
|
}
|
|
|
|
/* Report UNLOAD_DONE to MCP */
|
|
bxe_send_unload_done(sc, keep_link);
|
|
}
|
|
|
|
static void
|
|
bxe_disable_close_the_gate(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
int port = SC_PORT(sc);
|
|
|
|
BLOGD(sc, DBG_LOAD,
|
|
"Disabling 'close the gates'\n");
|
|
|
|
if (CHIP_IS_E1(sc)) {
|
|
uint32_t addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
|
|
MISC_REG_AEU_MASK_ATTN_FUNC_0;
|
|
val = REG_RD(sc, addr);
|
|
val &= ~(0x300);
|
|
REG_WR(sc, addr, val);
|
|
} else {
|
|
val = REG_RD(sc, MISC_REG_AEU_GENERAL_MASK);
|
|
val &= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK |
|
|
MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK);
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_MASK, val);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Cleans the object that have internal lists without sending
|
|
* ramrods. Should be run when interrutps are disabled.
|
|
*/
|
|
static void
|
|
bxe_squeeze_objects(struct bxe_softc *sc)
|
|
{
|
|
unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
|
|
struct ecore_mcast_ramrod_params rparam = { NULL };
|
|
struct ecore_vlan_mac_obj *mac_obj = &sc->sp_objs->mac_obj;
|
|
int rc;
|
|
|
|
/* Cleanup MACs' object first... */
|
|
|
|
/* Wait for completion of requested */
|
|
bxe_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
|
|
/* Perform a dry cleanup */
|
|
bxe_set_bit(RAMROD_DRV_CLR_ONLY, &ramrod_flags);
|
|
|
|
/* Clean ETH primary MAC */
|
|
bxe_set_bit(ECORE_ETH_MAC, &vlan_mac_flags);
|
|
rc = mac_obj->delete_all(sc, &sc->sp_objs->mac_obj, &vlan_mac_flags,
|
|
&ramrod_flags);
|
|
if (rc != 0) {
|
|
BLOGE(sc, "Failed to clean ETH MACs (%d)\n", rc);
|
|
}
|
|
|
|
/* Cleanup UC list */
|
|
vlan_mac_flags = 0;
|
|
bxe_set_bit(ECORE_UC_LIST_MAC, &vlan_mac_flags);
|
|
rc = mac_obj->delete_all(sc, mac_obj, &vlan_mac_flags,
|
|
&ramrod_flags);
|
|
if (rc != 0) {
|
|
BLOGE(sc, "Failed to clean UC list MACs (%d)\n", rc);
|
|
}
|
|
|
|
/* Now clean mcast object... */
|
|
|
|
rparam.mcast_obj = &sc->mcast_obj;
|
|
bxe_set_bit(RAMROD_DRV_CLR_ONLY, &rparam.ramrod_flags);
|
|
|
|
/* Add a DEL command... */
|
|
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_DEL);
|
|
if (rc < 0) {
|
|
BLOGE(sc, "Failed to send DEL MCAST command (%d)\n", rc);
|
|
}
|
|
|
|
/* now wait until all pending commands are cleared */
|
|
|
|
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
|
|
while (rc != 0) {
|
|
if (rc < 0) {
|
|
BLOGE(sc, "Failed to clean MCAST object (%d)\n", rc);
|
|
return;
|
|
}
|
|
|
|
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
|
|
}
|
|
}
|
|
|
|
/* stop the controller */
|
|
static __noinline int
|
|
bxe_nic_unload(struct bxe_softc *sc,
|
|
uint32_t unload_mode,
|
|
uint8_t keep_link)
|
|
{
|
|
uint8_t global = FALSE;
|
|
uint32_t val;
|
|
|
|
BXE_CORE_LOCK_ASSERT(sc);
|
|
|
|
BLOGD(sc, DBG_LOAD, "Starting NIC unload...\n");
|
|
|
|
/* mark driver as unloaded in shmem2 */
|
|
if (IS_PF(sc) && SHMEM2_HAS(sc, drv_capabilities_flag)) {
|
|
val = SHMEM2_RD(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)]);
|
|
SHMEM2_WR(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)],
|
|
val & ~DRV_FLAGS_CAPABILITIES_LOADED_L2);
|
|
}
|
|
|
|
if (IS_PF(sc) && sc->recovery_state != BXE_RECOVERY_DONE &&
|
|
(sc->state == BXE_STATE_CLOSED || sc->state == BXE_STATE_ERROR)) {
|
|
/*
|
|
* We can get here if the driver has been unloaded
|
|
* during parity error recovery and is either waiting for a
|
|
* leader to complete or for other functions to unload and
|
|
* then ifconfig down has been issued. In this case we want to
|
|
* unload and let other functions to complete a recovery
|
|
* process.
|
|
*/
|
|
sc->recovery_state = BXE_RECOVERY_DONE;
|
|
sc->is_leader = 0;
|
|
bxe_release_leader_lock(sc);
|
|
mb();
|
|
|
|
BLOGD(sc, DBG_LOAD, "Releasing a leadership...\n");
|
|
BLOGE(sc, "Can't unload in closed or error state\n");
|
|
return (-1);
|
|
}
|
|
|
|
/*
|
|
* Nothing to do during unload if previous bxe_nic_load()
|
|
* did not completed succesfully - all resourses are released.
|
|
*/
|
|
if ((sc->state == BXE_STATE_CLOSED) ||
|
|
(sc->state == BXE_STATE_ERROR)) {
|
|
return (0);
|
|
}
|
|
|
|
sc->state = BXE_STATE_CLOSING_WAITING_HALT;
|
|
mb();
|
|
|
|
/* stop tx */
|
|
bxe_tx_disable(sc);
|
|
|
|
sc->rx_mode = BXE_RX_MODE_NONE;
|
|
/* XXX set rx mode ??? */
|
|
|
|
if (IS_PF(sc)) {
|
|
/* set ALWAYS_ALIVE bit in shmem */
|
|
sc->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
|
|
|
|
bxe_drv_pulse(sc);
|
|
|
|
bxe_stats_handle(sc, STATS_EVENT_STOP);
|
|
bxe_save_statistics(sc);
|
|
}
|
|
|
|
/* wait till consumers catch up with producers in all queues */
|
|
bxe_drain_tx_queues(sc);
|
|
|
|
/* if VF indicate to PF this function is going down (PF will delete sp
|
|
* elements and clear initializations
|
|
*/
|
|
if (IS_VF(sc)) {
|
|
; /* bxe_vfpf_close_vf(sc); */
|
|
} else if (unload_mode != UNLOAD_RECOVERY) {
|
|
/* if this is a normal/close unload need to clean up chip */
|
|
bxe_chip_cleanup(sc, unload_mode, keep_link);
|
|
} else {
|
|
/* Send the UNLOAD_REQUEST to the MCP */
|
|
bxe_send_unload_req(sc, unload_mode);
|
|
|
|
/*
|
|
* Prevent transactions to host from the functions on the
|
|
* engine that doesn't reset global blocks in case of global
|
|
* attention once gloabl blocks are reset and gates are opened
|
|
* (the engine which leader will perform the recovery
|
|
* last).
|
|
*/
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
bxe_pf_disable(sc);
|
|
}
|
|
|
|
/* disable HW interrupts */
|
|
bxe_int_disable_sync(sc, TRUE);
|
|
|
|
/* detach interrupts */
|
|
bxe_interrupt_detach(sc);
|
|
|
|
/* Report UNLOAD_DONE to MCP */
|
|
bxe_send_unload_done(sc, FALSE);
|
|
}
|
|
|
|
/*
|
|
* At this stage no more interrupts will arrive so we may safely clean
|
|
* the queue'able objects here in case they failed to get cleaned so far.
|
|
*/
|
|
if (IS_PF(sc)) {
|
|
bxe_squeeze_objects(sc);
|
|
}
|
|
|
|
/* There should be no more pending SP commands at this stage */
|
|
sc->sp_state = 0;
|
|
|
|
sc->port.pmf = 0;
|
|
|
|
bxe_free_fp_buffers(sc);
|
|
|
|
if (IS_PF(sc)) {
|
|
bxe_free_mem(sc);
|
|
}
|
|
|
|
bxe_free_fw_stats_mem(sc);
|
|
|
|
sc->state = BXE_STATE_CLOSED;
|
|
|
|
/*
|
|
* Check if there are pending parity attentions. If there are - set
|
|
* RECOVERY_IN_PROGRESS.
|
|
*/
|
|
if (IS_PF(sc) && bxe_chk_parity_attn(sc, &global, FALSE)) {
|
|
bxe_set_reset_in_progress(sc);
|
|
|
|
/* Set RESET_IS_GLOBAL if needed */
|
|
if (global) {
|
|
bxe_set_reset_global(sc);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The last driver must disable a "close the gate" if there is no
|
|
* parity attention or "process kill" pending.
|
|
*/
|
|
if (IS_PF(sc) && !bxe_clear_pf_load(sc) &&
|
|
bxe_reset_is_done(sc, SC_PATH(sc))) {
|
|
bxe_disable_close_the_gate(sc);
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "Ended NIC unload\n");
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Called by the OS to set various media options (i.e. link, speed, etc.) when
|
|
* the user runs "ifconfig bxe media ..." or "ifconfig bxe mediaopt ...".
|
|
*/
|
|
static int
|
|
bxe_ifmedia_update(struct ifnet *ifp)
|
|
{
|
|
struct bxe_softc *sc = (struct bxe_softc *)if_getsoftc(ifp);
|
|
struct ifmedia *ifm;
|
|
|
|
ifm = &sc->ifmedia;
|
|
|
|
/* We only support Ethernet media type. */
|
|
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER) {
|
|
return (EINVAL);
|
|
}
|
|
|
|
switch (IFM_SUBTYPE(ifm->ifm_media)) {
|
|
case IFM_AUTO:
|
|
break;
|
|
case IFM_10G_CX4:
|
|
case IFM_10G_SR:
|
|
case IFM_10G_T:
|
|
case IFM_10G_TWINAX:
|
|
default:
|
|
/* We don't support changing the media type. */
|
|
BLOGD(sc, DBG_LOAD, "Invalid media type (%d)\n",
|
|
IFM_SUBTYPE(ifm->ifm_media));
|
|
return (EINVAL);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Called by the OS to get the current media status (i.e. link, speed, etc.).
|
|
*/
|
|
static void
|
|
bxe_ifmedia_status(struct ifnet *ifp, struct ifmediareq *ifmr)
|
|
{
|
|
struct bxe_softc *sc = if_getsoftc(ifp);
|
|
|
|
/* Report link down if the driver isn't running. */
|
|
if ((if_getdrvflags(ifp) & IFF_DRV_RUNNING) == 0) {
|
|
ifmr->ifm_active |= IFM_NONE;
|
|
return;
|
|
}
|
|
|
|
/* Setup the default interface info. */
|
|
ifmr->ifm_status = IFM_AVALID;
|
|
ifmr->ifm_active = IFM_ETHER;
|
|
|
|
if (sc->link_vars.link_up) {
|
|
ifmr->ifm_status |= IFM_ACTIVE;
|
|
} else {
|
|
ifmr->ifm_active |= IFM_NONE;
|
|
return;
|
|
}
|
|
|
|
ifmr->ifm_active |= sc->media;
|
|
|
|
if (sc->link_vars.duplex == DUPLEX_FULL) {
|
|
ifmr->ifm_active |= IFM_FDX;
|
|
} else {
|
|
ifmr->ifm_active |= IFM_HDX;
|
|
}
|
|
}
|
|
|
|
static int
|
|
bxe_ioctl_nvram(struct bxe_softc *sc,
|
|
uint32_t priv_op,
|
|
struct ifreq *ifr)
|
|
{
|
|
struct bxe_nvram_data nvdata_base;
|
|
struct bxe_nvram_data *nvdata;
|
|
int len;
|
|
int error = 0;
|
|
|
|
copyin(ifr->ifr_data, &nvdata_base, sizeof(nvdata_base));
|
|
|
|
len = (sizeof(struct bxe_nvram_data) +
|
|
nvdata_base.len -
|
|
sizeof(uint32_t));
|
|
|
|
if (len > sizeof(struct bxe_nvram_data)) {
|
|
if ((nvdata = (struct bxe_nvram_data *)
|
|
malloc(len, M_DEVBUF,
|
|
(M_NOWAIT | M_ZERO))) == NULL) {
|
|
BLOGE(sc, "BXE_IOC_RD_NVRAM malloc failed\n");
|
|
return (1);
|
|
}
|
|
memcpy(nvdata, &nvdata_base, sizeof(struct bxe_nvram_data));
|
|
} else {
|
|
nvdata = &nvdata_base;
|
|
}
|
|
|
|
if (priv_op == BXE_IOC_RD_NVRAM) {
|
|
BLOGD(sc, DBG_IOCTL, "IOC_RD_NVRAM 0x%x %d\n",
|
|
nvdata->offset, nvdata->len);
|
|
error = bxe_nvram_read(sc,
|
|
nvdata->offset,
|
|
(uint8_t *)nvdata->value,
|
|
nvdata->len);
|
|
copyout(nvdata, ifr->ifr_data, len);
|
|
} else { /* BXE_IOC_WR_NVRAM */
|
|
BLOGD(sc, DBG_IOCTL, "IOC_WR_NVRAM 0x%x %d\n",
|
|
nvdata->offset, nvdata->len);
|
|
copyin(ifr->ifr_data, nvdata, len);
|
|
error = bxe_nvram_write(sc,
|
|
nvdata->offset,
|
|
(uint8_t *)nvdata->value,
|
|
nvdata->len);
|
|
}
|
|
|
|
if (len > sizeof(struct bxe_nvram_data)) {
|
|
free(nvdata, M_DEVBUF);
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
bxe_ioctl_stats_show(struct bxe_softc *sc,
|
|
uint32_t priv_op,
|
|
struct ifreq *ifr)
|
|
{
|
|
const size_t str_size = (BXE_NUM_ETH_STATS * STAT_NAME_LEN);
|
|
const size_t stats_size = (BXE_NUM_ETH_STATS * sizeof(uint64_t));
|
|
caddr_t p_tmp;
|
|
uint32_t *offset;
|
|
int i;
|
|
|
|
switch (priv_op)
|
|
{
|
|
case BXE_IOC_STATS_SHOW_NUM:
|
|
memset(ifr->ifr_data, 0, sizeof(union bxe_stats_show_data));
|
|
((union bxe_stats_show_data *)ifr->ifr_data)->desc.num =
|
|
BXE_NUM_ETH_STATS;
|
|
((union bxe_stats_show_data *)ifr->ifr_data)->desc.len =
|
|
STAT_NAME_LEN;
|
|
return (0);
|
|
|
|
case BXE_IOC_STATS_SHOW_STR:
|
|
memset(ifr->ifr_data, 0, str_size);
|
|
p_tmp = ifr->ifr_data;
|
|
for (i = 0; i < BXE_NUM_ETH_STATS; i++) {
|
|
strcpy(p_tmp, bxe_eth_stats_arr[i].string);
|
|
p_tmp += STAT_NAME_LEN;
|
|
}
|
|
return (0);
|
|
|
|
case BXE_IOC_STATS_SHOW_CNT:
|
|
memset(ifr->ifr_data, 0, stats_size);
|
|
p_tmp = ifr->ifr_data;
|
|
for (i = 0; i < BXE_NUM_ETH_STATS; i++) {
|
|
offset = ((uint32_t *)&sc->eth_stats +
|
|
bxe_eth_stats_arr[i].offset);
|
|
switch (bxe_eth_stats_arr[i].size) {
|
|
case 4:
|
|
*((uint64_t *)p_tmp) = (uint64_t)*offset;
|
|
break;
|
|
case 8:
|
|
*((uint64_t *)p_tmp) = HILO_U64(*offset, *(offset + 1));
|
|
break;
|
|
default:
|
|
*((uint64_t *)p_tmp) = 0;
|
|
}
|
|
p_tmp += sizeof(uint64_t);
|
|
}
|
|
return (0);
|
|
|
|
default:
|
|
return (-1);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_handle_chip_tq(void *context,
|
|
int pending)
|
|
{
|
|
struct bxe_softc *sc = (struct bxe_softc *)context;
|
|
long work = atomic_load_acq_long(&sc->chip_tq_flags);
|
|
|
|
switch (work)
|
|
{
|
|
case CHIP_TQ_START:
|
|
if ((if_getflags(sc->ifp) & IFF_UP) &&
|
|
!(if_getdrvflags(sc->ifp) & IFF_DRV_RUNNING)) {
|
|
/* start the interface */
|
|
BLOGD(sc, DBG_LOAD, "Starting the interface...\n");
|
|
BXE_CORE_LOCK(sc);
|
|
bxe_init_locked(sc);
|
|
BXE_CORE_UNLOCK(sc);
|
|
}
|
|
break;
|
|
|
|
case CHIP_TQ_STOP:
|
|
if (!(if_getflags(sc->ifp) & IFF_UP) &&
|
|
(if_getdrvflags(sc->ifp) & IFF_DRV_RUNNING)) {
|
|
/* bring down the interface */
|
|
BLOGD(sc, DBG_LOAD, "Stopping the interface...\n");
|
|
bxe_periodic_stop(sc);
|
|
BXE_CORE_LOCK(sc);
|
|
bxe_stop_locked(sc);
|
|
BXE_CORE_UNLOCK(sc);
|
|
}
|
|
break;
|
|
|
|
case CHIP_TQ_REINIT:
|
|
if (if_getdrvflags(sc->ifp) & IFF_DRV_RUNNING) {
|
|
/* restart the interface */
|
|
BLOGD(sc, DBG_LOAD, "Restarting the interface...\n");
|
|
bxe_periodic_stop(sc);
|
|
BXE_CORE_LOCK(sc);
|
|
bxe_stop_locked(sc);
|
|
bxe_init_locked(sc);
|
|
BXE_CORE_UNLOCK(sc);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Handles any IOCTL calls from the operating system.
|
|
*
|
|
* Returns:
|
|
* 0 = Success, >0 Failure
|
|
*/
|
|
static int
|
|
bxe_ioctl(if_t ifp,
|
|
u_long command,
|
|
caddr_t data)
|
|
{
|
|
struct bxe_softc *sc = if_getsoftc(ifp);
|
|
struct ifreq *ifr = (struct ifreq *)data;
|
|
struct bxe_nvram_data *nvdata;
|
|
uint32_t priv_op;
|
|
int mask = 0;
|
|
int reinit = 0;
|
|
int error = 0;
|
|
|
|
int mtu_min = (ETH_MIN_PACKET_SIZE - ETH_HLEN);
|
|
int mtu_max = (MJUM9BYTES - ETH_OVERHEAD - IP_HEADER_ALIGNMENT_PADDING);
|
|
|
|
switch (command)
|
|
{
|
|
case SIOCSIFMTU:
|
|
BLOGD(sc, DBG_IOCTL, "Received SIOCSIFMTU ioctl (mtu=%d)\n",
|
|
ifr->ifr_mtu);
|
|
|
|
if (sc->mtu == ifr->ifr_mtu) {
|
|
/* nothing to change */
|
|
break;
|
|
}
|
|
|
|
if ((ifr->ifr_mtu < mtu_min) || (ifr->ifr_mtu > mtu_max)) {
|
|
BLOGE(sc, "Unsupported MTU size %d (range is %d-%d)\n",
|
|
ifr->ifr_mtu, mtu_min, mtu_max);
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
atomic_store_rel_int((volatile unsigned int *)&sc->mtu,
|
|
(unsigned long)ifr->ifr_mtu);
|
|
/*
|
|
atomic_store_rel_long((volatile unsigned long *)&if_getmtu(ifp),
|
|
(unsigned long)ifr->ifr_mtu);
|
|
XXX - Not sure why it needs to be atomic
|
|
*/
|
|
if_setmtu(ifp, ifr->ifr_mtu);
|
|
reinit = 1;
|
|
break;
|
|
|
|
case SIOCSIFFLAGS:
|
|
/* toggle the interface state up or down */
|
|
BLOGD(sc, DBG_IOCTL, "Received SIOCSIFFLAGS ioctl\n");
|
|
|
|
/* check if the interface is up */
|
|
if (if_getflags(ifp) & IFF_UP) {
|
|
if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) {
|
|
/* set the receive mode flags */
|
|
bxe_set_rx_mode(sc);
|
|
} else {
|
|
atomic_store_rel_long(&sc->chip_tq_flags, CHIP_TQ_START);
|
|
taskqueue_enqueue(sc->chip_tq, &sc->chip_tq_task);
|
|
}
|
|
} else {
|
|
if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) {
|
|
atomic_store_rel_long(&sc->chip_tq_flags, CHIP_TQ_STOP);
|
|
taskqueue_enqueue(sc->chip_tq, &sc->chip_tq_task);
|
|
}
|
|
}
|
|
|
|
break;
|
|
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
/* add/delete multicast addresses */
|
|
BLOGD(sc, DBG_IOCTL, "Received SIOCADDMULTI/SIOCDELMULTI ioctl\n");
|
|
|
|
/* check if the interface is up */
|
|
if (if_getdrvflags(ifp) & IFF_DRV_RUNNING) {
|
|
/* set the receive mode flags */
|
|
bxe_set_rx_mode(sc);
|
|
}
|
|
|
|
break;
|
|
|
|
case SIOCSIFCAP:
|
|
/* find out which capabilities have changed */
|
|
mask = (ifr->ifr_reqcap ^ if_getcapenable(ifp));
|
|
|
|
BLOGD(sc, DBG_IOCTL, "Received SIOCSIFCAP ioctl (mask=0x%08x)\n",
|
|
mask);
|
|
|
|
/* toggle the LRO capabilites enable flag */
|
|
if (mask & IFCAP_LRO) {
|
|
if_togglecapenable(ifp, IFCAP_LRO);
|
|
BLOGD(sc, DBG_IOCTL, "Turning LRO %s\n",
|
|
(if_getcapenable(ifp) & IFCAP_LRO) ? "ON" : "OFF");
|
|
reinit = 1;
|
|
}
|
|
|
|
/* toggle the TXCSUM checksum capabilites enable flag */
|
|
if (mask & IFCAP_TXCSUM) {
|
|
if_togglecapenable(ifp, IFCAP_TXCSUM);
|
|
BLOGD(sc, DBG_IOCTL, "Turning TXCSUM %s\n",
|
|
(if_getcapenable(ifp) & IFCAP_TXCSUM) ? "ON" : "OFF");
|
|
if (if_getcapenable(ifp) & IFCAP_TXCSUM) {
|
|
if_sethwassistbits(ifp, (CSUM_IP |
|
|
CSUM_TCP |
|
|
CSUM_UDP |
|
|
CSUM_TSO |
|
|
CSUM_TCP_IPV6 |
|
|
CSUM_UDP_IPV6), 0);
|
|
} else {
|
|
if_clearhwassist(ifp); /* XXX */
|
|
}
|
|
}
|
|
|
|
/* toggle the RXCSUM checksum capabilities enable flag */
|
|
if (mask & IFCAP_RXCSUM) {
|
|
if_togglecapenable(ifp, IFCAP_RXCSUM);
|
|
BLOGD(sc, DBG_IOCTL, "Turning RXCSUM %s\n",
|
|
(if_getcapenable(ifp) & IFCAP_RXCSUM) ? "ON" : "OFF");
|
|
if (if_getcapenable(ifp) & IFCAP_RXCSUM) {
|
|
if_sethwassistbits(ifp, (CSUM_IP |
|
|
CSUM_TCP |
|
|
CSUM_UDP |
|
|
CSUM_TSO |
|
|
CSUM_TCP_IPV6 |
|
|
CSUM_UDP_IPV6), 0);
|
|
} else {
|
|
if_clearhwassist(ifp); /* XXX */
|
|
}
|
|
}
|
|
|
|
/* toggle TSO4 capabilities enabled flag */
|
|
if (mask & IFCAP_TSO4) {
|
|
if_togglecapenable(ifp, IFCAP_TSO4);
|
|
BLOGD(sc, DBG_IOCTL, "Turning TSO4 %s\n",
|
|
(if_getcapenable(ifp) & IFCAP_TSO4) ? "ON" : "OFF");
|
|
}
|
|
|
|
/* toggle TSO6 capabilities enabled flag */
|
|
if (mask & IFCAP_TSO6) {
|
|
if_togglecapenable(ifp, IFCAP_TSO6);
|
|
BLOGD(sc, DBG_IOCTL, "Turning TSO6 %s\n",
|
|
(if_getcapenable(ifp) & IFCAP_TSO6) ? "ON" : "OFF");
|
|
}
|
|
|
|
/* toggle VLAN_HWTSO capabilities enabled flag */
|
|
if (mask & IFCAP_VLAN_HWTSO) {
|
|
|
|
if_togglecapenable(ifp, IFCAP_VLAN_HWTSO);
|
|
BLOGD(sc, DBG_IOCTL, "Turning VLAN_HWTSO %s\n",
|
|
(if_getcapenable(ifp) & IFCAP_VLAN_HWTSO) ? "ON" : "OFF");
|
|
}
|
|
|
|
/* toggle VLAN_HWCSUM capabilities enabled flag */
|
|
if (mask & IFCAP_VLAN_HWCSUM) {
|
|
/* XXX investigate this... */
|
|
BLOGE(sc, "Changing VLAN_HWCSUM is not supported!\n");
|
|
error = EINVAL;
|
|
}
|
|
|
|
/* toggle VLAN_MTU capabilities enable flag */
|
|
if (mask & IFCAP_VLAN_MTU) {
|
|
/* XXX investigate this... */
|
|
BLOGE(sc, "Changing VLAN_MTU is not supported!\n");
|
|
error = EINVAL;
|
|
}
|
|
|
|
/* toggle VLAN_HWTAGGING capabilities enabled flag */
|
|
if (mask & IFCAP_VLAN_HWTAGGING) {
|
|
/* XXX investigate this... */
|
|
BLOGE(sc, "Changing VLAN_HWTAGGING is not supported!\n");
|
|
error = EINVAL;
|
|
}
|
|
|
|
/* toggle VLAN_HWFILTER capabilities enabled flag */
|
|
if (mask & IFCAP_VLAN_HWFILTER) {
|
|
/* XXX investigate this... */
|
|
BLOGE(sc, "Changing VLAN_HWFILTER is not supported!\n");
|
|
error = EINVAL;
|
|
}
|
|
|
|
/* XXX not yet...
|
|
* IFCAP_WOL_MAGIC
|
|
*/
|
|
|
|
break;
|
|
|
|
case SIOCSIFMEDIA:
|
|
case SIOCGIFMEDIA:
|
|
/* set/get interface media */
|
|
BLOGD(sc, DBG_IOCTL,
|
|
"Received SIOCSIFMEDIA/SIOCGIFMEDIA ioctl (cmd=%lu)\n",
|
|
(command & 0xff));
|
|
error = ifmedia_ioctl_drv(ifp, ifr, &sc->ifmedia, command);
|
|
break;
|
|
|
|
case SIOCGPRIVATE_0:
|
|
copyin(ifr->ifr_data, &priv_op, sizeof(priv_op));
|
|
|
|
switch (priv_op)
|
|
{
|
|
case BXE_IOC_RD_NVRAM:
|
|
case BXE_IOC_WR_NVRAM:
|
|
nvdata = (struct bxe_nvram_data *)ifr->ifr_data;
|
|
BLOGD(sc, DBG_IOCTL,
|
|
"Received Private NVRAM ioctl addr=0x%x size=%u\n",
|
|
nvdata->offset, nvdata->len);
|
|
error = bxe_ioctl_nvram(sc, priv_op, ifr);
|
|
break;
|
|
|
|
case BXE_IOC_STATS_SHOW_NUM:
|
|
case BXE_IOC_STATS_SHOW_STR:
|
|
case BXE_IOC_STATS_SHOW_CNT:
|
|
BLOGD(sc, DBG_IOCTL, "Received Private Stats ioctl (%d)\n",
|
|
priv_op);
|
|
error = bxe_ioctl_stats_show(sc, priv_op, ifr);
|
|
break;
|
|
|
|
default:
|
|
BLOGW(sc, "Received Private Unknown ioctl (%d)\n", priv_op);
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
BLOGD(sc, DBG_IOCTL, "Received Unknown Ioctl (cmd=%lu)\n",
|
|
(command & 0xff));
|
|
error = ether_ioctl_drv(ifp, command, data);
|
|
break;
|
|
}
|
|
|
|
if (reinit && (if_getdrvflags(sc->ifp) & IFF_DRV_RUNNING)) {
|
|
BLOGD(sc, DBG_LOAD | DBG_IOCTL,
|
|
"Re-initializing hardware from IOCTL change\n");
|
|
atomic_store_rel_long(&sc->chip_tq_flags, CHIP_TQ_REINIT);
|
|
taskqueue_enqueue(sc->chip_tq, &sc->chip_tq_task);
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
static __noinline void
|
|
bxe_dump_mbuf(struct bxe_softc *sc,
|
|
struct mbuf *m,
|
|
uint8_t contents)
|
|
{
|
|
char * type;
|
|
int i = 0;
|
|
|
|
if (!(sc->debug & DBG_MBUF)) {
|
|
return;
|
|
}
|
|
|
|
if (m == NULL) {
|
|
BLOGD(sc, DBG_MBUF, "mbuf: null pointer\n");
|
|
return;
|
|
}
|
|
|
|
while (m) {
|
|
BLOGD(sc, DBG_MBUF,
|
|
"%02d: mbuf=%p m_len=%d m_flags=0x%b m_data=%p\n",
|
|
i, m, m->m_len, m->m_flags, M_FLAG_BITS, m->m_data);
|
|
|
|
if (m->m_flags & M_PKTHDR) {
|
|
BLOGD(sc, DBG_MBUF,
|
|
"%02d: - m_pkthdr: tot_len=%d flags=0x%b csum_flags=%b\n",
|
|
i, m->m_pkthdr.len, m->m_flags, M_FLAG_BITS,
|
|
(int)m->m_pkthdr.csum_flags, CSUM_BITS);
|
|
}
|
|
|
|
if (m->m_flags & M_EXT) {
|
|
switch (m->m_ext.ext_type) {
|
|
case EXT_CLUSTER: type = "EXT_CLUSTER"; break;
|
|
case EXT_SFBUF: type = "EXT_SFBUF"; break;
|
|
case EXT_JUMBOP: type = "EXT_JUMBOP"; break;
|
|
case EXT_JUMBO9: type = "EXT_JUMBO9"; break;
|
|
case EXT_JUMBO16: type = "EXT_JUMBO16"; break;
|
|
case EXT_PACKET: type = "EXT_PACKET"; break;
|
|
case EXT_MBUF: type = "EXT_MBUF"; break;
|
|
case EXT_NET_DRV: type = "EXT_NET_DRV"; break;
|
|
case EXT_MOD_TYPE: type = "EXT_MOD_TYPE"; break;
|
|
case EXT_DISPOSABLE: type = "EXT_DISPOSABLE"; break;
|
|
case EXT_EXTREF: type = "EXT_EXTREF"; break;
|
|
default: type = "UNKNOWN"; break;
|
|
}
|
|
|
|
BLOGD(sc, DBG_MBUF,
|
|
"%02d: - m_ext: %p ext_size=%d type=%s\n",
|
|
i, m->m_ext.ext_buf, m->m_ext.ext_size, type);
|
|
}
|
|
|
|
if (contents) {
|
|
bxe_dump_mbuf_data(sc, "mbuf data", m, TRUE);
|
|
}
|
|
|
|
m = m->m_next;
|
|
i++;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Checks to ensure the 13 bd sliding window is >= MSS for TSO.
|
|
* Check that (13 total bds - 3 bds) = 10 bd window >= MSS.
|
|
* The window: 3 bds are = 1 for headers BD + 2 for parse BD and last BD
|
|
* The headers comes in a seperate bd in FreeBSD so 13-3=10.
|
|
* Returns: 0 if OK to send, 1 if packet needs further defragmentation
|
|
*/
|
|
static int
|
|
bxe_chktso_window(struct bxe_softc *sc,
|
|
int nsegs,
|
|
bus_dma_segment_t *segs,
|
|
struct mbuf *m)
|
|
{
|
|
uint32_t num_wnds, wnd_size, wnd_sum;
|
|
int32_t frag_idx, wnd_idx;
|
|
unsigned short lso_mss;
|
|
int defrag;
|
|
|
|
defrag = 0;
|
|
wnd_sum = 0;
|
|
wnd_size = 10;
|
|
num_wnds = nsegs - wnd_size;
|
|
lso_mss = htole16(m->m_pkthdr.tso_segsz);
|
|
|
|
/*
|
|
* Total header lengths Eth+IP+TCP in first FreeBSD mbuf so calculate the
|
|
* first window sum of data while skipping the first assuming it is the
|
|
* header in FreeBSD.
|
|
*/
|
|
for (frag_idx = 1; (frag_idx <= wnd_size); frag_idx++) {
|
|
wnd_sum += htole16(segs[frag_idx].ds_len);
|
|
}
|
|
|
|
/* check the first 10 bd window size */
|
|
if (wnd_sum < lso_mss) {
|
|
return (1);
|
|
}
|
|
|
|
/* run through the windows */
|
|
for (wnd_idx = 0; wnd_idx < num_wnds; wnd_idx++, frag_idx++) {
|
|
/* subtract the first mbuf->m_len of the last wndw(-header) */
|
|
wnd_sum -= htole16(segs[wnd_idx+1].ds_len);
|
|
/* add the next mbuf len to the len of our new window */
|
|
wnd_sum += htole16(segs[frag_idx].ds_len);
|
|
if (wnd_sum < lso_mss) {
|
|
return (1);
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static uint8_t
|
|
bxe_set_pbd_csum_e2(struct bxe_fastpath *fp,
|
|
struct mbuf *m,
|
|
uint32_t *parsing_data)
|
|
{
|
|
struct ether_vlan_header *eh = NULL;
|
|
struct ip *ip4 = NULL;
|
|
struct ip6_hdr *ip6 = NULL;
|
|
caddr_t ip = NULL;
|
|
struct tcphdr *th = NULL;
|
|
int e_hlen, ip_hlen, l4_off;
|
|
uint16_t proto;
|
|
|
|
if (m->m_pkthdr.csum_flags == CSUM_IP) {
|
|
/* no L4 checksum offload needed */
|
|
return (0);
|
|
}
|
|
|
|
/* get the Ethernet header */
|
|
eh = mtod(m, struct ether_vlan_header *);
|
|
|
|
/* handle VLAN encapsulation if present */
|
|
if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) {
|
|
e_hlen = (ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN);
|
|
proto = ntohs(eh->evl_proto);
|
|
} else {
|
|
e_hlen = ETHER_HDR_LEN;
|
|
proto = ntohs(eh->evl_encap_proto);
|
|
}
|
|
|
|
switch (proto) {
|
|
case ETHERTYPE_IP:
|
|
/* get the IP header, if mbuf len < 20 then header in next mbuf */
|
|
ip4 = (m->m_len < sizeof(struct ip)) ?
|
|
(struct ip *)m->m_next->m_data :
|
|
(struct ip *)(m->m_data + e_hlen);
|
|
/* ip_hl is number of 32-bit words */
|
|
ip_hlen = (ip4->ip_hl << 2);
|
|
ip = (caddr_t)ip4;
|
|
break;
|
|
case ETHERTYPE_IPV6:
|
|
/* get the IPv6 header, if mbuf len < 40 then header in next mbuf */
|
|
ip6 = (m->m_len < sizeof(struct ip6_hdr)) ?
|
|
(struct ip6_hdr *)m->m_next->m_data :
|
|
(struct ip6_hdr *)(m->m_data + e_hlen);
|
|
/* XXX cannot support offload with IPv6 extensions */
|
|
ip_hlen = sizeof(struct ip6_hdr);
|
|
ip = (caddr_t)ip6;
|
|
break;
|
|
default:
|
|
/* We can't offload in this case... */
|
|
/* XXX error stat ??? */
|
|
return (0);
|
|
}
|
|
|
|
/* XXX assuming L4 header is contiguous to IPv4/IPv6 in the same mbuf */
|
|
l4_off = (e_hlen + ip_hlen);
|
|
|
|
*parsing_data |=
|
|
(((l4_off >> 1) << ETH_TX_PARSE_BD_E2_L4_HDR_START_OFFSET_W_SHIFT) &
|
|
ETH_TX_PARSE_BD_E2_L4_HDR_START_OFFSET_W);
|
|
|
|
if (m->m_pkthdr.csum_flags & (CSUM_TCP |
|
|
CSUM_TSO |
|
|
CSUM_TCP_IPV6)) {
|
|
fp->eth_q_stats.tx_ofld_frames_csum_tcp++;
|
|
th = (struct tcphdr *)(ip + ip_hlen);
|
|
/* th_off is number of 32-bit words */
|
|
*parsing_data |= ((th->th_off <<
|
|
ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) &
|
|
ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW);
|
|
return (l4_off + (th->th_off << 2)); /* entire header length */
|
|
} else if (m->m_pkthdr.csum_flags & (CSUM_UDP |
|
|
CSUM_UDP_IPV6)) {
|
|
fp->eth_q_stats.tx_ofld_frames_csum_udp++;
|
|
return (l4_off + sizeof(struct udphdr)); /* entire header length */
|
|
} else {
|
|
/* XXX error stat ??? */
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
static uint8_t
|
|
bxe_set_pbd_csum(struct bxe_fastpath *fp,
|
|
struct mbuf *m,
|
|
struct eth_tx_parse_bd_e1x *pbd)
|
|
{
|
|
struct ether_vlan_header *eh = NULL;
|
|
struct ip *ip4 = NULL;
|
|
struct ip6_hdr *ip6 = NULL;
|
|
caddr_t ip = NULL;
|
|
struct tcphdr *th = NULL;
|
|
struct udphdr *uh = NULL;
|
|
int e_hlen, ip_hlen;
|
|
uint16_t proto;
|
|
uint8_t hlen;
|
|
uint16_t tmp_csum;
|
|
uint32_t *tmp_uh;
|
|
|
|
/* get the Ethernet header */
|
|
eh = mtod(m, struct ether_vlan_header *);
|
|
|
|
/* handle VLAN encapsulation if present */
|
|
if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) {
|
|
e_hlen = (ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN);
|
|
proto = ntohs(eh->evl_proto);
|
|
} else {
|
|
e_hlen = ETHER_HDR_LEN;
|
|
proto = ntohs(eh->evl_encap_proto);
|
|
}
|
|
|
|
switch (proto) {
|
|
case ETHERTYPE_IP:
|
|
/* get the IP header, if mbuf len < 20 then header in next mbuf */
|
|
ip4 = (m->m_len < sizeof(struct ip)) ?
|
|
(struct ip *)m->m_next->m_data :
|
|
(struct ip *)(m->m_data + e_hlen);
|
|
/* ip_hl is number of 32-bit words */
|
|
ip_hlen = (ip4->ip_hl << 1);
|
|
ip = (caddr_t)ip4;
|
|
break;
|
|
case ETHERTYPE_IPV6:
|
|
/* get the IPv6 header, if mbuf len < 40 then header in next mbuf */
|
|
ip6 = (m->m_len < sizeof(struct ip6_hdr)) ?
|
|
(struct ip6_hdr *)m->m_next->m_data :
|
|
(struct ip6_hdr *)(m->m_data + e_hlen);
|
|
/* XXX cannot support offload with IPv6 extensions */
|
|
ip_hlen = (sizeof(struct ip6_hdr) >> 1);
|
|
ip = (caddr_t)ip6;
|
|
break;
|
|
default:
|
|
/* We can't offload in this case... */
|
|
/* XXX error stat ??? */
|
|
return (0);
|
|
}
|
|
|
|
hlen = (e_hlen >> 1);
|
|
|
|
/* note that rest of global_data is indirectly zeroed here */
|
|
if (m->m_flags & M_VLANTAG) {
|
|
pbd->global_data =
|
|
htole16(hlen | (1 << ETH_TX_PARSE_BD_E1X_LLC_SNAP_EN_SHIFT));
|
|
} else {
|
|
pbd->global_data = htole16(hlen);
|
|
}
|
|
|
|
pbd->ip_hlen_w = ip_hlen;
|
|
|
|
hlen += pbd->ip_hlen_w;
|
|
|
|
/* XXX assuming L4 header is contiguous to IPv4/IPv6 in the same mbuf */
|
|
|
|
if (m->m_pkthdr.csum_flags & (CSUM_TCP |
|
|
CSUM_TSO |
|
|
CSUM_TCP_IPV6)) {
|
|
th = (struct tcphdr *)(ip + (ip_hlen << 1));
|
|
/* th_off is number of 32-bit words */
|
|
hlen += (uint16_t)(th->th_off << 1);
|
|
} else if (m->m_pkthdr.csum_flags & (CSUM_UDP |
|
|
CSUM_UDP_IPV6)) {
|
|
uh = (struct udphdr *)(ip + (ip_hlen << 1));
|
|
hlen += (sizeof(struct udphdr) / 2);
|
|
} else {
|
|
/* valid case as only CSUM_IP was set */
|
|
return (0);
|
|
}
|
|
|
|
pbd->total_hlen_w = htole16(hlen);
|
|
|
|
if (m->m_pkthdr.csum_flags & (CSUM_TCP |
|
|
CSUM_TSO |
|
|
CSUM_TCP_IPV6)) {
|
|
fp->eth_q_stats.tx_ofld_frames_csum_tcp++;
|
|
pbd->tcp_pseudo_csum = ntohs(th->th_sum);
|
|
} else if (m->m_pkthdr.csum_flags & (CSUM_UDP |
|
|
CSUM_UDP_IPV6)) {
|
|
fp->eth_q_stats.tx_ofld_frames_csum_udp++;
|
|
|
|
/*
|
|
* Everest1 (i.e. 57710, 57711, 57711E) does not natively support UDP
|
|
* checksums and does not know anything about the UDP header and where
|
|
* the checksum field is located. It only knows about TCP. Therefore
|
|
* we "lie" to the hardware for outgoing UDP packets w/ checksum
|
|
* offload. Since the checksum field offset for TCP is 16 bytes and
|
|
* for UDP it is 6 bytes we pass a pointer to the hardware that is 10
|
|
* bytes less than the start of the UDP header. This allows the
|
|
* hardware to write the checksum in the correct spot. But the
|
|
* hardware will compute a checksum which includes the last 10 bytes
|
|
* of the IP header. To correct this we tweak the stack computed
|
|
* pseudo checksum by folding in the calculation of the inverse
|
|
* checksum for those final 10 bytes of the IP header. This allows
|
|
* the correct checksum to be computed by the hardware.
|
|
*/
|
|
|
|
/* set pointer 10 bytes before UDP header */
|
|
tmp_uh = (uint32_t *)((uint8_t *)uh - 10);
|
|
|
|
/* calculate a pseudo header checksum over the first 10 bytes */
|
|
tmp_csum = in_pseudo(*tmp_uh,
|
|
*(tmp_uh + 1),
|
|
*(uint16_t *)(tmp_uh + 2));
|
|
|
|
pbd->tcp_pseudo_csum = ntohs(in_addword(uh->uh_sum, ~tmp_csum));
|
|
}
|
|
|
|
return (hlen * 2); /* entire header length, number of bytes */
|
|
}
|
|
|
|
static void
|
|
bxe_set_pbd_lso_e2(struct mbuf *m,
|
|
uint32_t *parsing_data)
|
|
{
|
|
*parsing_data |= ((m->m_pkthdr.tso_segsz <<
|
|
ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT) &
|
|
ETH_TX_PARSE_BD_E2_LSO_MSS);
|
|
|
|
/* XXX test for IPv6 with extension header... */
|
|
#if 0
|
|
struct ip6_hdr *ip6;
|
|
if (ip6 && ip6->ip6_nxt == 'some ipv6 extension header')
|
|
*parsing_data |= ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR;
|
|
#endif
|
|
}
|
|
|
|
static void
|
|
bxe_set_pbd_lso(struct mbuf *m,
|
|
struct eth_tx_parse_bd_e1x *pbd)
|
|
{
|
|
struct ether_vlan_header *eh = NULL;
|
|
struct ip *ip = NULL;
|
|
struct tcphdr *th = NULL;
|
|
int e_hlen;
|
|
|
|
/* get the Ethernet header */
|
|
eh = mtod(m, struct ether_vlan_header *);
|
|
|
|
/* handle VLAN encapsulation if present */
|
|
e_hlen = (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) ?
|
|
(ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN) : ETHER_HDR_LEN;
|
|
|
|
/* get the IP and TCP header, with LSO entire header in first mbuf */
|
|
/* XXX assuming IPv4 */
|
|
ip = (struct ip *)(m->m_data + e_hlen);
|
|
th = (struct tcphdr *)((caddr_t)ip + (ip->ip_hl << 2));
|
|
|
|
pbd->lso_mss = htole16(m->m_pkthdr.tso_segsz);
|
|
pbd->tcp_send_seq = ntohl(th->th_seq);
|
|
pbd->tcp_flags = ((ntohl(((uint32_t *)th)[3]) >> 16) & 0xff);
|
|
|
|
#if 1
|
|
/* XXX IPv4 */
|
|
pbd->ip_id = ntohs(ip->ip_id);
|
|
pbd->tcp_pseudo_csum =
|
|
ntohs(in_pseudo(ip->ip_src.s_addr,
|
|
ip->ip_dst.s_addr,
|
|
htons(IPPROTO_TCP)));
|
|
#else
|
|
/* XXX IPv6 */
|
|
pbd->tcp_pseudo_csum =
|
|
ntohs(in_pseudo(&ip6->ip6_src,
|
|
&ip6->ip6_dst,
|
|
htons(IPPROTO_TCP)));
|
|
#endif
|
|
|
|
pbd->global_data |=
|
|
htole16(ETH_TX_PARSE_BD_E1X_PSEUDO_CS_WITHOUT_LEN);
|
|
}
|
|
|
|
/*
|
|
* Encapsulte an mbuf cluster into the tx bd chain and makes the memory
|
|
* visible to the controller.
|
|
*
|
|
* If an mbuf is submitted to this routine and cannot be given to the
|
|
* controller (e.g. it has too many fragments) then the function may free
|
|
* the mbuf and return to the caller.
|
|
*
|
|
* Returns:
|
|
* 0 = Success, !0 = Failure
|
|
* Note the side effect that an mbuf may be freed if it causes a problem.
|
|
*/
|
|
static int
|
|
bxe_tx_encap(struct bxe_fastpath *fp, struct mbuf **m_head)
|
|
{
|
|
bus_dma_segment_t segs[32];
|
|
struct mbuf *m0;
|
|
struct bxe_sw_tx_bd *tx_buf;
|
|
struct eth_tx_parse_bd_e1x *pbd_e1x = NULL;
|
|
struct eth_tx_parse_bd_e2 *pbd_e2 = NULL;
|
|
/* struct eth_tx_parse_2nd_bd *pbd2 = NULL; */
|
|
struct eth_tx_bd *tx_data_bd;
|
|
struct eth_tx_bd *tx_total_pkt_size_bd;
|
|
struct eth_tx_start_bd *tx_start_bd;
|
|
uint16_t bd_prod, pkt_prod, total_pkt_size;
|
|
uint8_t mac_type;
|
|
int defragged, error, nsegs, rc, nbds, vlan_off, ovlan;
|
|
struct bxe_softc *sc;
|
|
uint16_t tx_bd_avail;
|
|
struct ether_vlan_header *eh;
|
|
uint32_t pbd_e2_parsing_data = 0;
|
|
uint8_t hlen = 0;
|
|
int tmp_bd;
|
|
int i;
|
|
|
|
sc = fp->sc;
|
|
|
|
M_ASSERTPKTHDR(*m_head);
|
|
|
|
m0 = *m_head;
|
|
rc = defragged = nbds = ovlan = vlan_off = total_pkt_size = 0;
|
|
tx_start_bd = NULL;
|
|
tx_data_bd = NULL;
|
|
tx_total_pkt_size_bd = NULL;
|
|
|
|
/* get the H/W pointer for packets and BDs */
|
|
pkt_prod = fp->tx_pkt_prod;
|
|
bd_prod = fp->tx_bd_prod;
|
|
|
|
mac_type = UNICAST_ADDRESS;
|
|
|
|
/* map the mbuf into the next open DMAable memory */
|
|
tx_buf = &fp->tx_mbuf_chain[TX_BD(pkt_prod)];
|
|
error = bus_dmamap_load_mbuf_sg(fp->tx_mbuf_tag,
|
|
tx_buf->m_map, m0,
|
|
segs, &nsegs, BUS_DMA_NOWAIT);
|
|
|
|
/* mapping errors */
|
|
if(__predict_false(error != 0)) {
|
|
fp->eth_q_stats.tx_dma_mapping_failure++;
|
|
if (error == ENOMEM) {
|
|
/* resource issue, try again later */
|
|
rc = ENOMEM;
|
|
} else if (error == EFBIG) {
|
|
/* possibly recoverable with defragmentation */
|
|
fp->eth_q_stats.mbuf_defrag_attempts++;
|
|
m0 = m_defrag(*m_head, M_NOWAIT);
|
|
if (m0 == NULL) {
|
|
fp->eth_q_stats.mbuf_defrag_failures++;
|
|
rc = ENOBUFS;
|
|
} else {
|
|
/* defrag successful, try mapping again */
|
|
*m_head = m0;
|
|
error = bus_dmamap_load_mbuf_sg(fp->tx_mbuf_tag,
|
|
tx_buf->m_map, m0,
|
|
segs, &nsegs, BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
fp->eth_q_stats.tx_dma_mapping_failure++;
|
|
rc = error;
|
|
}
|
|
}
|
|
} else {
|
|
/* unknown, unrecoverable mapping error */
|
|
BLOGE(sc, "Unknown TX mapping error rc=%d\n", error);
|
|
bxe_dump_mbuf(sc, m0, FALSE);
|
|
rc = error;
|
|
}
|
|
|
|
goto bxe_tx_encap_continue;
|
|
}
|
|
|
|
tx_bd_avail = bxe_tx_avail(sc, fp);
|
|
|
|
/* make sure there is enough room in the send queue */
|
|
if (__predict_false(tx_bd_avail < (nsegs + 2))) {
|
|
/* Recoverable, try again later. */
|
|
fp->eth_q_stats.tx_hw_queue_full++;
|
|
bus_dmamap_unload(fp->tx_mbuf_tag, tx_buf->m_map);
|
|
rc = ENOMEM;
|
|
goto bxe_tx_encap_continue;
|
|
}
|
|
|
|
/* capture the current H/W TX chain high watermark */
|
|
if (__predict_false(fp->eth_q_stats.tx_hw_max_queue_depth <
|
|
(TX_BD_USABLE - tx_bd_avail))) {
|
|
fp->eth_q_stats.tx_hw_max_queue_depth = (TX_BD_USABLE - tx_bd_avail);
|
|
}
|
|
|
|
/* make sure it fits in the packet window */
|
|
if (__predict_false(nsegs > BXE_MAX_SEGMENTS)) {
|
|
/*
|
|
* The mbuf may be to big for the controller to handle. If the frame
|
|
* is a TSO frame we'll need to do an additional check.
|
|
*/
|
|
if (m0->m_pkthdr.csum_flags & CSUM_TSO) {
|
|
if (bxe_chktso_window(sc, nsegs, segs, m0) == 0) {
|
|
goto bxe_tx_encap_continue; /* OK to send */
|
|
} else {
|
|
fp->eth_q_stats.tx_window_violation_tso++;
|
|
}
|
|
} else {
|
|
fp->eth_q_stats.tx_window_violation_std++;
|
|
}
|
|
|
|
/* lets try to defragment this mbuf and remap it */
|
|
fp->eth_q_stats.mbuf_defrag_attempts++;
|
|
bus_dmamap_unload(fp->tx_mbuf_tag, tx_buf->m_map);
|
|
|
|
m0 = m_defrag(*m_head, M_NOWAIT);
|
|
if (m0 == NULL) {
|
|
fp->eth_q_stats.mbuf_defrag_failures++;
|
|
/* Ugh, just drop the frame... :( */
|
|
rc = ENOBUFS;
|
|
} else {
|
|
/* defrag successful, try mapping again */
|
|
*m_head = m0;
|
|
error = bus_dmamap_load_mbuf_sg(fp->tx_mbuf_tag,
|
|
tx_buf->m_map, m0,
|
|
segs, &nsegs, BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
fp->eth_q_stats.tx_dma_mapping_failure++;
|
|
/* No sense in trying to defrag/copy chain, drop it. :( */
|
|
rc = error;
|
|
}
|
|
else {
|
|
/* if the chain is still too long then drop it */
|
|
if (__predict_false(nsegs > BXE_MAX_SEGMENTS)) {
|
|
bus_dmamap_unload(fp->tx_mbuf_tag, tx_buf->m_map);
|
|
rc = ENODEV;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
bxe_tx_encap_continue:
|
|
|
|
/* Check for errors */
|
|
if (rc) {
|
|
if (rc == ENOMEM) {
|
|
/* recoverable try again later */
|
|
} else {
|
|
fp->eth_q_stats.tx_soft_errors++;
|
|
fp->eth_q_stats.mbuf_alloc_tx--;
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
}
|
|
|
|
return (rc);
|
|
}
|
|
|
|
/* set flag according to packet type (UNICAST_ADDRESS is default) */
|
|
if (m0->m_flags & M_BCAST) {
|
|
mac_type = BROADCAST_ADDRESS;
|
|
} else if (m0->m_flags & M_MCAST) {
|
|
mac_type = MULTICAST_ADDRESS;
|
|
}
|
|
|
|
/* store the mbuf into the mbuf ring */
|
|
tx_buf->m = m0;
|
|
tx_buf->first_bd = fp->tx_bd_prod;
|
|
tx_buf->flags = 0;
|
|
|
|
/* prepare the first transmit (start) BD for the mbuf */
|
|
tx_start_bd = &fp->tx_chain[TX_BD(bd_prod)].start_bd;
|
|
|
|
BLOGD(sc, DBG_TX,
|
|
"sending pkt_prod=%u tx_buf=%p next_idx=%u bd=%u tx_start_bd=%p\n",
|
|
pkt_prod, tx_buf, fp->tx_pkt_prod, bd_prod, tx_start_bd);
|
|
|
|
tx_start_bd->addr_lo = htole32(U64_LO(segs[0].ds_addr));
|
|
tx_start_bd->addr_hi = htole32(U64_HI(segs[0].ds_addr));
|
|
tx_start_bd->nbytes = htole16(segs[0].ds_len);
|
|
total_pkt_size += tx_start_bd->nbytes;
|
|
tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
|
|
|
|
tx_start_bd->general_data = (1 << ETH_TX_START_BD_HDR_NBDS_SHIFT);
|
|
|
|
/* all frames have at least Start BD + Parsing BD */
|
|
nbds = nsegs + 1;
|
|
tx_start_bd->nbd = htole16(nbds);
|
|
|
|
if (m0->m_flags & M_VLANTAG) {
|
|
tx_start_bd->vlan_or_ethertype = htole16(m0->m_pkthdr.ether_vtag);
|
|
tx_start_bd->bd_flags.as_bitfield |=
|
|
(X_ETH_OUTBAND_VLAN << ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT);
|
|
} else {
|
|
/* vf tx, start bd must hold the ethertype for fw to enforce it */
|
|
if (IS_VF(sc)) {
|
|
/* map ethernet header to find type and header length */
|
|
eh = mtod(m0, struct ether_vlan_header *);
|
|
tx_start_bd->vlan_or_ethertype = eh->evl_encap_proto;
|
|
} else {
|
|
/* used by FW for packet accounting */
|
|
tx_start_bd->vlan_or_ethertype = htole16(fp->tx_pkt_prod);
|
|
#if 0
|
|
/*
|
|
* If NPAR-SD is active then FW should do the tagging regardless
|
|
* of value of priority. Otherwise, if priority indicates this is
|
|
* a control packet we need to indicate to FW to avoid tagging.
|
|
*/
|
|
if (!IS_MF_AFEX(sc) && (mbuf priority == PRIO_CONTROL)) {
|
|
SET_FLAG(tx_start_bd->general_data,
|
|
ETH_TX_START_BD_FORCE_VLAN_MODE, 1);
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/*
|
|
* add a parsing BD from the chain. The parsing BD is always added
|
|
* though it is only used for TSO and chksum
|
|
*/
|
|
bd_prod = TX_BD_NEXT(bd_prod);
|
|
|
|
if (m0->m_pkthdr.csum_flags) {
|
|
if (m0->m_pkthdr.csum_flags & CSUM_IP) {
|
|
fp->eth_q_stats.tx_ofld_frames_csum_ip++;
|
|
tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_IP_CSUM;
|
|
}
|
|
|
|
if (m0->m_pkthdr.csum_flags & CSUM_TCP_IPV6) {
|
|
tx_start_bd->bd_flags.as_bitfield |= (ETH_TX_BD_FLAGS_IPV6 |
|
|
ETH_TX_BD_FLAGS_L4_CSUM);
|
|
} else if (m0->m_pkthdr.csum_flags & CSUM_UDP_IPV6) {
|
|
tx_start_bd->bd_flags.as_bitfield |= (ETH_TX_BD_FLAGS_IPV6 |
|
|
ETH_TX_BD_FLAGS_IS_UDP |
|
|
ETH_TX_BD_FLAGS_L4_CSUM);
|
|
} else if ((m0->m_pkthdr.csum_flags & CSUM_TCP) ||
|
|
(m0->m_pkthdr.csum_flags & CSUM_TSO)) {
|
|
tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_L4_CSUM;
|
|
} else if (m0->m_pkthdr.csum_flags & CSUM_UDP) {
|
|
tx_start_bd->bd_flags.as_bitfield |= (ETH_TX_BD_FLAGS_L4_CSUM |
|
|
ETH_TX_BD_FLAGS_IS_UDP);
|
|
}
|
|
}
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
pbd_e2 = &fp->tx_chain[TX_BD(bd_prod)].parse_bd_e2;
|
|
memset(pbd_e2, 0, sizeof(struct eth_tx_parse_bd_e2));
|
|
|
|
if (m0->m_pkthdr.csum_flags) {
|
|
hlen = bxe_set_pbd_csum_e2(fp, m0, &pbd_e2_parsing_data);
|
|
}
|
|
|
|
#if 0
|
|
/*
|
|
* Add the MACs to the parsing BD if the module param was
|
|
* explicitly set, if this is a vf, or in switch independent
|
|
* mode.
|
|
*/
|
|
if (sc->flags & BXE_TX_SWITCHING || IS_VF(sc) || IS_MF_SI(sc)) {
|
|
eh = mtod(m0, struct ether_vlan_header *);
|
|
bxe_set_fw_mac_addr(&pbd_e2->data.mac_addr.src_hi,
|
|
&pbd_e2->data.mac_addr.src_mid,
|
|
&pbd_e2->data.mac_addr.src_lo,
|
|
eh->evl_shost);
|
|
bxe_set_fw_mac_addr(&pbd_e2->data.mac_addr.dst_hi,
|
|
&pbd_e2->data.mac_addr.dst_mid,
|
|
&pbd_e2->data.mac_addr.dst_lo,
|
|
eh->evl_dhost);
|
|
}
|
|
#endif
|
|
|
|
SET_FLAG(pbd_e2_parsing_data, ETH_TX_PARSE_BD_E2_ETH_ADDR_TYPE,
|
|
mac_type);
|
|
} else {
|
|
uint16_t global_data = 0;
|
|
|
|
pbd_e1x = &fp->tx_chain[TX_BD(bd_prod)].parse_bd_e1x;
|
|
memset(pbd_e1x, 0, sizeof(struct eth_tx_parse_bd_e1x));
|
|
|
|
if (m0->m_pkthdr.csum_flags) {
|
|
hlen = bxe_set_pbd_csum(fp, m0, pbd_e1x);
|
|
}
|
|
|
|
SET_FLAG(global_data,
|
|
ETH_TX_PARSE_BD_E1X_ETH_ADDR_TYPE, mac_type);
|
|
pbd_e1x->global_data |= htole16(global_data);
|
|
}
|
|
|
|
/* setup the parsing BD with TSO specific info */
|
|
if (m0->m_pkthdr.csum_flags & CSUM_TSO) {
|
|
fp->eth_q_stats.tx_ofld_frames_lso++;
|
|
tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_SW_LSO;
|
|
|
|
if (__predict_false(tx_start_bd->nbytes > hlen)) {
|
|
fp->eth_q_stats.tx_ofld_frames_lso_hdr_splits++;
|
|
|
|
/* split the first BD into header/data making the fw job easy */
|
|
nbds++;
|
|
tx_start_bd->nbd = htole16(nbds);
|
|
tx_start_bd->nbytes = htole16(hlen);
|
|
|
|
bd_prod = TX_BD_NEXT(bd_prod);
|
|
|
|
/* new transmit BD after the tx_parse_bd */
|
|
tx_data_bd = &fp->tx_chain[TX_BD(bd_prod)].reg_bd;
|
|
tx_data_bd->addr_hi = htole32(U64_HI(segs[0].ds_addr + hlen));
|
|
tx_data_bd->addr_lo = htole32(U64_LO(segs[0].ds_addr + hlen));
|
|
tx_data_bd->nbytes = htole16(segs[0].ds_len - hlen);
|
|
if (tx_total_pkt_size_bd == NULL) {
|
|
tx_total_pkt_size_bd = tx_data_bd;
|
|
}
|
|
|
|
BLOGD(sc, DBG_TX,
|
|
"TSO split header size is %d (%x:%x) nbds %d\n",
|
|
le16toh(tx_start_bd->nbytes),
|
|
le32toh(tx_start_bd->addr_hi),
|
|
le32toh(tx_start_bd->addr_lo),
|
|
nbds);
|
|
}
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
bxe_set_pbd_lso_e2(m0, &pbd_e2_parsing_data);
|
|
} else {
|
|
bxe_set_pbd_lso(m0, pbd_e1x);
|
|
}
|
|
}
|
|
|
|
if (pbd_e2_parsing_data) {
|
|
pbd_e2->parsing_data = htole32(pbd_e2_parsing_data);
|
|
}
|
|
|
|
/* prepare remaining BDs, start tx bd contains first seg/frag */
|
|
for (i = 1; i < nsegs ; i++) {
|
|
bd_prod = TX_BD_NEXT(bd_prod);
|
|
tx_data_bd = &fp->tx_chain[TX_BD(bd_prod)].reg_bd;
|
|
tx_data_bd->addr_lo = htole32(U64_LO(segs[i].ds_addr));
|
|
tx_data_bd->addr_hi = htole32(U64_HI(segs[i].ds_addr));
|
|
tx_data_bd->nbytes = htole16(segs[i].ds_len);
|
|
if (tx_total_pkt_size_bd == NULL) {
|
|
tx_total_pkt_size_bd = tx_data_bd;
|
|
}
|
|
total_pkt_size += tx_data_bd->nbytes;
|
|
}
|
|
|
|
BLOGD(sc, DBG_TX, "last bd %p\n", tx_data_bd);
|
|
|
|
if (tx_total_pkt_size_bd != NULL) {
|
|
tx_total_pkt_size_bd->total_pkt_bytes = total_pkt_size;
|
|
}
|
|
|
|
if (__predict_false(sc->debug & DBG_TX)) {
|
|
tmp_bd = tx_buf->first_bd;
|
|
for (i = 0; i < nbds; i++)
|
|
{
|
|
if (i == 0) {
|
|
BLOGD(sc, DBG_TX,
|
|
"TX Strt: %p bd=%d nbd=%d vlan=0x%x "
|
|
"bd_flags=0x%x hdr_nbds=%d\n",
|
|
tx_start_bd,
|
|
tmp_bd,
|
|
le16toh(tx_start_bd->nbd),
|
|
le16toh(tx_start_bd->vlan_or_ethertype),
|
|
tx_start_bd->bd_flags.as_bitfield,
|
|
(tx_start_bd->general_data & ETH_TX_START_BD_HDR_NBDS));
|
|
} else if (i == 1) {
|
|
if (pbd_e1x) {
|
|
BLOGD(sc, DBG_TX,
|
|
"-> Prse: %p bd=%d global=0x%x ip_hlen_w=%u "
|
|
"ip_id=%u lso_mss=%u tcp_flags=0x%x csum=0x%x "
|
|
"tcp_seq=%u total_hlen_w=%u\n",
|
|
pbd_e1x,
|
|
tmp_bd,
|
|
pbd_e1x->global_data,
|
|
pbd_e1x->ip_hlen_w,
|
|
pbd_e1x->ip_id,
|
|
pbd_e1x->lso_mss,
|
|
pbd_e1x->tcp_flags,
|
|
pbd_e1x->tcp_pseudo_csum,
|
|
pbd_e1x->tcp_send_seq,
|
|
le16toh(pbd_e1x->total_hlen_w));
|
|
} else { /* if (pbd_e2) */
|
|
BLOGD(sc, DBG_TX,
|
|
"-> Parse: %p bd=%d dst=%02x:%02x:%02x "
|
|
"src=%02x:%02x:%02x parsing_data=0x%x\n",
|
|
pbd_e2,
|
|
tmp_bd,
|
|
pbd_e2->data.mac_addr.dst_hi,
|
|
pbd_e2->data.mac_addr.dst_mid,
|
|
pbd_e2->data.mac_addr.dst_lo,
|
|
pbd_e2->data.mac_addr.src_hi,
|
|
pbd_e2->data.mac_addr.src_mid,
|
|
pbd_e2->data.mac_addr.src_lo,
|
|
pbd_e2->parsing_data);
|
|
}
|
|
}
|
|
|
|
if (i != 1) { /* skip parse db as it doesn't hold data */
|
|
tx_data_bd = &fp->tx_chain[TX_BD(tmp_bd)].reg_bd;
|
|
BLOGD(sc, DBG_TX,
|
|
"-> Frag: %p bd=%d nbytes=%d hi=0x%x lo: 0x%x\n",
|
|
tx_data_bd,
|
|
tmp_bd,
|
|
le16toh(tx_data_bd->nbytes),
|
|
le32toh(tx_data_bd->addr_hi),
|
|
le32toh(tx_data_bd->addr_lo));
|
|
}
|
|
|
|
tmp_bd = TX_BD_NEXT(tmp_bd);
|
|
}
|
|
}
|
|
|
|
BLOGD(sc, DBG_TX, "doorbell: nbds=%d bd=%u\n", nbds, bd_prod);
|
|
|
|
/* update TX BD producer index value for next TX */
|
|
bd_prod = TX_BD_NEXT(bd_prod);
|
|
|
|
/*
|
|
* If the chain of tx_bd's describing this frame is adjacent to or spans
|
|
* an eth_tx_next_bd element then we need to increment the nbds value.
|
|
*/
|
|
if (TX_BD_IDX(bd_prod) < nbds) {
|
|
nbds++;
|
|
}
|
|
|
|
/* don't allow reordering of writes for nbd and packets */
|
|
mb();
|
|
|
|
fp->tx_db.data.prod += nbds;
|
|
|
|
/* producer points to the next free tx_bd at this point */
|
|
fp->tx_pkt_prod++;
|
|
fp->tx_bd_prod = bd_prod;
|
|
|
|
DOORBELL(sc, fp->index, fp->tx_db.raw);
|
|
|
|
fp->eth_q_stats.tx_pkts++;
|
|
|
|
/* Prevent speculative reads from getting ahead of the status block. */
|
|
bus_space_barrier(sc->bar[BAR0].tag, sc->bar[BAR0].handle,
|
|
0, 0, BUS_SPACE_BARRIER_READ);
|
|
|
|
/* Prevent speculative reads from getting ahead of the doorbell. */
|
|
bus_space_barrier(sc->bar[BAR2].tag, sc->bar[BAR2].handle,
|
|
0, 0, BUS_SPACE_BARRIER_READ);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bxe_tx_start_locked(struct bxe_softc *sc,
|
|
if_t ifp,
|
|
struct bxe_fastpath *fp)
|
|
{
|
|
struct mbuf *m = NULL;
|
|
int tx_count = 0;
|
|
uint16_t tx_bd_avail;
|
|
|
|
BXE_FP_TX_LOCK_ASSERT(fp);
|
|
|
|
/* keep adding entries while there are frames to send */
|
|
while (!if_sendq_empty(ifp)) {
|
|
|
|
/*
|
|
* check for any frames to send
|
|
* dequeue can still be NULL even if queue is not empty
|
|
*/
|
|
m = if_dequeue(ifp);
|
|
if (__predict_false(m == NULL)) {
|
|
break;
|
|
}
|
|
|
|
/* the mbuf now belongs to us */
|
|
fp->eth_q_stats.mbuf_alloc_tx++;
|
|
|
|
/*
|
|
* Put the frame into the transmit ring. If we don't have room,
|
|
* place the mbuf back at the head of the TX queue, set the
|
|
* OACTIVE flag, and wait for the NIC to drain the chain.
|
|
*/
|
|
if (__predict_false(bxe_tx_encap(fp, &m))) {
|
|
fp->eth_q_stats.tx_encap_failures++;
|
|
if (m != NULL) {
|
|
/* mark the TX queue as full and return the frame */
|
|
if_setdrvflagbits(ifp, IFF_DRV_OACTIVE, 0);
|
|
if_sendq_prepend(ifp, m);
|
|
fp->eth_q_stats.mbuf_alloc_tx--;
|
|
fp->eth_q_stats.tx_queue_xoff++;
|
|
}
|
|
|
|
/* stop looking for more work */
|
|
break;
|
|
}
|
|
|
|
/* the frame was enqueued successfully */
|
|
tx_count++;
|
|
|
|
/* send a copy of the frame to any BPF listeners. */
|
|
if_etherbpfmtap(ifp, m);
|
|
|
|
tx_bd_avail = bxe_tx_avail(sc, fp);
|
|
|
|
/* handle any completions if we're running low */
|
|
if (tx_bd_avail < BXE_TX_CLEANUP_THRESHOLD) {
|
|
/* bxe_txeof will set IFF_DRV_OACTIVE appropriately */
|
|
bxe_txeof(sc, fp);
|
|
if (if_getdrvflags(ifp) & IFF_DRV_OACTIVE) {
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* all TX packets were dequeued and/or the tx ring is full */
|
|
if (tx_count > 0) {
|
|
/* reset the TX watchdog timeout timer */
|
|
fp->watchdog_timer = BXE_TX_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Legacy (non-RSS) dispatch routine */
|
|
static void
|
|
bxe_tx_start(if_t ifp)
|
|
{
|
|
struct bxe_softc *sc;
|
|
struct bxe_fastpath *fp;
|
|
|
|
sc = if_getsoftc(ifp);
|
|
|
|
if (!(if_getdrvflags(ifp) & IFF_DRV_RUNNING)) {
|
|
BLOGW(sc, "Interface not running, ignoring transmit request\n");
|
|
return;
|
|
}
|
|
|
|
if (if_getdrvflags(ifp) & IFF_DRV_OACTIVE) {
|
|
BLOGW(sc, "Interface TX queue is full, ignoring transmit request\n");
|
|
return;
|
|
}
|
|
|
|
if (!sc->link_vars.link_up) {
|
|
BLOGW(sc, "Interface link is down, ignoring transmit request\n");
|
|
return;
|
|
}
|
|
|
|
fp = &sc->fp[0];
|
|
|
|
BXE_FP_TX_LOCK(fp);
|
|
bxe_tx_start_locked(sc, ifp, fp);
|
|
BXE_FP_TX_UNLOCK(fp);
|
|
}
|
|
|
|
#if __FreeBSD_version >= 800000
|
|
|
|
static int
|
|
bxe_tx_mq_start_locked(struct bxe_softc *sc,
|
|
if_t ifp,
|
|
struct bxe_fastpath *fp,
|
|
struct mbuf *m)
|
|
{
|
|
struct buf_ring *tx_br = fp->tx_br;
|
|
struct mbuf *next;
|
|
int depth, rc, tx_count;
|
|
uint16_t tx_bd_avail;
|
|
|
|
rc = tx_count = 0;
|
|
|
|
if (!tx_br) {
|
|
BLOGE(sc, "Multiqueue TX and no buf_ring!\n");
|
|
return (EINVAL);
|
|
}
|
|
|
|
/* fetch the depth of the driver queue */
|
|
depth = drbr_inuse_drv(ifp, tx_br);
|
|
if (depth > fp->eth_q_stats.tx_max_drbr_queue_depth) {
|
|
fp->eth_q_stats.tx_max_drbr_queue_depth = depth;
|
|
}
|
|
|
|
BXE_FP_TX_LOCK_ASSERT(fp);
|
|
|
|
if (m == NULL) {
|
|
/* no new work, check for pending frames */
|
|
next = drbr_dequeue_drv(ifp, tx_br);
|
|
} else if (drbr_needs_enqueue_drv(ifp, tx_br)) {
|
|
/* have both new and pending work, maintain packet order */
|
|
rc = drbr_enqueue_drv(ifp, tx_br, m);
|
|
if (rc != 0) {
|
|
fp->eth_q_stats.tx_soft_errors++;
|
|
goto bxe_tx_mq_start_locked_exit;
|
|
}
|
|
next = drbr_dequeue_drv(ifp, tx_br);
|
|
} else {
|
|
/* new work only and nothing pending */
|
|
next = m;
|
|
}
|
|
|
|
/* keep adding entries while there are frames to send */
|
|
while (next != NULL) {
|
|
|
|
/* the mbuf now belongs to us */
|
|
fp->eth_q_stats.mbuf_alloc_tx++;
|
|
|
|
/*
|
|
* Put the frame into the transmit ring. If we don't have room,
|
|
* place the mbuf back at the head of the TX queue, set the
|
|
* OACTIVE flag, and wait for the NIC to drain the chain.
|
|
*/
|
|
rc = bxe_tx_encap(fp, &next);
|
|
if (__predict_false(rc != 0)) {
|
|
fp->eth_q_stats.tx_encap_failures++;
|
|
if (next != NULL) {
|
|
/* mark the TX queue as full and save the frame */
|
|
if_setdrvflagbits(ifp, IFF_DRV_OACTIVE, 0);
|
|
/* XXX this may reorder the frame */
|
|
rc = drbr_enqueue_drv(ifp, tx_br, next);
|
|
fp->eth_q_stats.mbuf_alloc_tx--;
|
|
fp->eth_q_stats.tx_frames_deferred++;
|
|
}
|
|
|
|
/* stop looking for more work */
|
|
break;
|
|
}
|
|
|
|
/* the transmit frame was enqueued successfully */
|
|
tx_count++;
|
|
|
|
/* send a copy of the frame to any BPF listeners */
|
|
if_etherbpfmtap(ifp, next);
|
|
|
|
tx_bd_avail = bxe_tx_avail(sc, fp);
|
|
|
|
/* handle any completions if we're running low */
|
|
if (tx_bd_avail < BXE_TX_CLEANUP_THRESHOLD) {
|
|
/* bxe_txeof will set IFF_DRV_OACTIVE appropriately */
|
|
bxe_txeof(sc, fp);
|
|
if (if_getdrvflags(ifp) & IFF_DRV_OACTIVE) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
next = drbr_dequeue_drv(ifp, tx_br);
|
|
}
|
|
|
|
/* all TX packets were dequeued and/or the tx ring is full */
|
|
if (tx_count > 0) {
|
|
/* reset the TX watchdog timeout timer */
|
|
fp->watchdog_timer = BXE_TX_TIMEOUT;
|
|
}
|
|
|
|
bxe_tx_mq_start_locked_exit:
|
|
|
|
return (rc);
|
|
}
|
|
|
|
/* Multiqueue (TSS) dispatch routine. */
|
|
static int
|
|
bxe_tx_mq_start(struct ifnet *ifp,
|
|
struct mbuf *m)
|
|
{
|
|
struct bxe_softc *sc = if_getsoftc(ifp);
|
|
struct bxe_fastpath *fp;
|
|
int fp_index, rc;
|
|
|
|
fp_index = 0; /* default is the first queue */
|
|
|
|
/* change the queue if using flow ID */
|
|
if ((m->m_flags & M_FLOWID) != 0) {
|
|
fp_index = (m->m_pkthdr.flowid % sc->num_queues);
|
|
}
|
|
|
|
fp = &sc->fp[fp_index];
|
|
|
|
if (!(if_getdrvflags(ifp) & IFF_DRV_RUNNING)) {
|
|
BLOGW(sc, "Interface not running, ignoring transmit request\n");
|
|
return (ENETDOWN);
|
|
}
|
|
|
|
if (if_getdrvflags(ifp) & IFF_DRV_OACTIVE) {
|
|
BLOGW(sc, "Interface TX queue is full, ignoring transmit request\n");
|
|
return (EBUSY);
|
|
}
|
|
|
|
if (!sc->link_vars.link_up) {
|
|
BLOGW(sc, "Interface link is down, ignoring transmit request\n");
|
|
return (ENETDOWN);
|
|
}
|
|
|
|
/* XXX change to TRYLOCK here and if failed then schedule taskqueue */
|
|
|
|
BXE_FP_TX_LOCK(fp);
|
|
rc = bxe_tx_mq_start_locked(sc, ifp, fp, m);
|
|
BXE_FP_TX_UNLOCK(fp);
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static void
|
|
bxe_mq_flush(struct ifnet *ifp)
|
|
{
|
|
struct bxe_softc *sc = if_getsoftc(ifp);
|
|
struct bxe_fastpath *fp;
|
|
struct mbuf *m;
|
|
int i;
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
|
|
if (fp->state != BXE_FP_STATE_OPEN) {
|
|
BLOGD(sc, DBG_LOAD, "Not clearing fp[%02d] buf_ring (state=%d)\n",
|
|
fp->index, fp->state);
|
|
continue;
|
|
}
|
|
|
|
if (fp->tx_br != NULL) {
|
|
BLOGD(sc, DBG_LOAD, "Clearing fp[%02d] buf_ring\n", fp->index);
|
|
BXE_FP_TX_LOCK(fp);
|
|
while ((m = buf_ring_dequeue_sc(fp->tx_br)) != NULL) {
|
|
m_freem(m);
|
|
}
|
|
BXE_FP_TX_UNLOCK(fp);
|
|
}
|
|
}
|
|
|
|
if_qflush_drv(ifp);
|
|
}
|
|
|
|
#endif /* FreeBSD_version >= 800000 */
|
|
|
|
static uint16_t
|
|
bxe_cid_ilt_lines(struct bxe_softc *sc)
|
|
{
|
|
if (IS_SRIOV(sc)) {
|
|
return ((BXE_FIRST_VF_CID + BXE_VF_CIDS) / ILT_PAGE_CIDS);
|
|
}
|
|
return (L2_ILT_LINES(sc));
|
|
}
|
|
|
|
static void
|
|
bxe_ilt_set_info(struct bxe_softc *sc)
|
|
{
|
|
struct ilt_client_info *ilt_client;
|
|
struct ecore_ilt *ilt = sc->ilt;
|
|
uint16_t line = 0;
|
|
|
|
ilt->start_line = FUNC_ILT_BASE(SC_FUNC(sc));
|
|
BLOGD(sc, DBG_LOAD, "ilt starts at line %d\n", ilt->start_line);
|
|
|
|
/* CDU */
|
|
ilt_client = &ilt->clients[ILT_CLIENT_CDU];
|
|
ilt_client->client_num = ILT_CLIENT_CDU;
|
|
ilt_client->page_size = CDU_ILT_PAGE_SZ;
|
|
ilt_client->flags = ILT_CLIENT_SKIP_MEM;
|
|
ilt_client->start = line;
|
|
line += bxe_cid_ilt_lines(sc);
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
line += CNIC_ILT_LINES;
|
|
}
|
|
|
|
ilt_client->end = (line - 1);
|
|
|
|
BLOGD(sc, DBG_LOAD,
|
|
"ilt client[CDU]: start %d, end %d, "
|
|
"psz 0x%x, flags 0x%x, hw psz %d\n",
|
|
ilt_client->start, ilt_client->end,
|
|
ilt_client->page_size,
|
|
ilt_client->flags,
|
|
ilog2(ilt_client->page_size >> 12));
|
|
|
|
/* QM */
|
|
if (QM_INIT(sc->qm_cid_count)) {
|
|
ilt_client = &ilt->clients[ILT_CLIENT_QM];
|
|
ilt_client->client_num = ILT_CLIENT_QM;
|
|
ilt_client->page_size = QM_ILT_PAGE_SZ;
|
|
ilt_client->flags = 0;
|
|
ilt_client->start = line;
|
|
|
|
/* 4 bytes for each cid */
|
|
line += DIV_ROUND_UP(sc->qm_cid_count * QM_QUEUES_PER_FUNC * 4,
|
|
QM_ILT_PAGE_SZ);
|
|
|
|
ilt_client->end = (line - 1);
|
|
|
|
BLOGD(sc, DBG_LOAD,
|
|
"ilt client[QM]: start %d, end %d, "
|
|
"psz 0x%x, flags 0x%x, hw psz %d\n",
|
|
ilt_client->start, ilt_client->end,
|
|
ilt_client->page_size, ilt_client->flags,
|
|
ilog2(ilt_client->page_size >> 12));
|
|
}
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
/* SRC */
|
|
ilt_client = &ilt->clients[ILT_CLIENT_SRC];
|
|
ilt_client->client_num = ILT_CLIENT_SRC;
|
|
ilt_client->page_size = SRC_ILT_PAGE_SZ;
|
|
ilt_client->flags = 0;
|
|
ilt_client->start = line;
|
|
line += SRC_ILT_LINES;
|
|
ilt_client->end = (line - 1);
|
|
|
|
BLOGD(sc, DBG_LOAD,
|
|
"ilt client[SRC]: start %d, end %d, "
|
|
"psz 0x%x, flags 0x%x, hw psz %d\n",
|
|
ilt_client->start, ilt_client->end,
|
|
ilt_client->page_size, ilt_client->flags,
|
|
ilog2(ilt_client->page_size >> 12));
|
|
|
|
/* TM */
|
|
ilt_client = &ilt->clients[ILT_CLIENT_TM];
|
|
ilt_client->client_num = ILT_CLIENT_TM;
|
|
ilt_client->page_size = TM_ILT_PAGE_SZ;
|
|
ilt_client->flags = 0;
|
|
ilt_client->start = line;
|
|
line += TM_ILT_LINES;
|
|
ilt_client->end = (line - 1);
|
|
|
|
BLOGD(sc, DBG_LOAD,
|
|
"ilt client[TM]: start %d, end %d, "
|
|
"psz 0x%x, flags 0x%x, hw psz %d\n",
|
|
ilt_client->start, ilt_client->end,
|
|
ilt_client->page_size, ilt_client->flags,
|
|
ilog2(ilt_client->page_size >> 12));
|
|
}
|
|
|
|
KASSERT((line <= ILT_MAX_LINES), ("Invalid number of ILT lines!"));
|
|
}
|
|
|
|
static void
|
|
bxe_set_fp_rx_buf_size(struct bxe_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
BLOGD(sc, DBG_LOAD, "mtu = %d\n", sc->mtu);
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
/* get the Rx buffer size for RX frames */
|
|
sc->fp[i].rx_buf_size =
|
|
(IP_HEADER_ALIGNMENT_PADDING +
|
|
ETH_OVERHEAD +
|
|
sc->mtu);
|
|
|
|
BLOGD(sc, DBG_LOAD, "rx_buf_size for fp[%02d] = %d\n",
|
|
i, sc->fp[i].rx_buf_size);
|
|
|
|
/* get the mbuf allocation size for RX frames */
|
|
if (sc->fp[i].rx_buf_size <= MCLBYTES) {
|
|
sc->fp[i].mbuf_alloc_size = MCLBYTES;
|
|
} else if (sc->fp[i].rx_buf_size <= BCM_PAGE_SIZE) {
|
|
sc->fp[i].mbuf_alloc_size = PAGE_SIZE;
|
|
} else {
|
|
sc->fp[i].mbuf_alloc_size = MJUM9BYTES;
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "mbuf_alloc_size for fp[%02d] = %d\n",
|
|
i, sc->fp[i].mbuf_alloc_size);
|
|
}
|
|
}
|
|
|
|
static int
|
|
bxe_alloc_ilt_mem(struct bxe_softc *sc)
|
|
{
|
|
int rc = 0;
|
|
|
|
if ((sc->ilt =
|
|
(struct ecore_ilt *)malloc(sizeof(struct ecore_ilt),
|
|
M_BXE_ILT,
|
|
(M_NOWAIT | M_ZERO))) == NULL) {
|
|
rc = 1;
|
|
}
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static int
|
|
bxe_alloc_ilt_lines_mem(struct bxe_softc *sc)
|
|
{
|
|
int rc = 0;
|
|
|
|
if ((sc->ilt->lines =
|
|
(struct ilt_line *)malloc((sizeof(struct ilt_line) * ILT_MAX_LINES),
|
|
M_BXE_ILT,
|
|
(M_NOWAIT | M_ZERO))) == NULL) {
|
|
rc = 1;
|
|
}
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static void
|
|
bxe_free_ilt_mem(struct bxe_softc *sc)
|
|
{
|
|
if (sc->ilt != NULL) {
|
|
free(sc->ilt, M_BXE_ILT);
|
|
sc->ilt = NULL;
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_free_ilt_lines_mem(struct bxe_softc *sc)
|
|
{
|
|
if (sc->ilt->lines != NULL) {
|
|
free(sc->ilt->lines, M_BXE_ILT);
|
|
sc->ilt->lines = NULL;
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_free_mem(struct bxe_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
#if 0
|
|
if (!CONFIGURE_NIC_MODE(sc)) {
|
|
/* free searcher T2 table */
|
|
bxe_dma_free(sc, &sc->t2);
|
|
}
|
|
#endif
|
|
|
|
for (i = 0; i < L2_ILT_LINES(sc); i++) {
|
|
bxe_dma_free(sc, &sc->context[i].vcxt_dma);
|
|
sc->context[i].vcxt = NULL;
|
|
sc->context[i].size = 0;
|
|
}
|
|
|
|
ecore_ilt_mem_op(sc, ILT_MEMOP_FREE);
|
|
|
|
bxe_free_ilt_lines_mem(sc);
|
|
|
|
#if 0
|
|
bxe_iov_free_mem(sc);
|
|
#endif
|
|
}
|
|
|
|
static int
|
|
bxe_alloc_mem(struct bxe_softc *sc)
|
|
{
|
|
int context_size;
|
|
int allocated;
|
|
int i;
|
|
|
|
#if 0
|
|
if (!CONFIGURE_NIC_MODE(sc)) {
|
|
/* allocate searcher T2 table */
|
|
if (bxe_dma_alloc(sc, SRC_T2_SZ,
|
|
&sc->t2, "searcher t2 table") != 0) {
|
|
return (-1);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Allocate memory for CDU context:
|
|
* This memory is allocated separately and not in the generic ILT
|
|
* functions because CDU differs in few aspects:
|
|
* 1. There can be multiple entities allocating memory for context -
|
|
* regular L2, CNIC, and SRIOV drivers. Each separately controls
|
|
* its own ILT lines.
|
|
* 2. Since CDU page-size is not a single 4KB page (which is the case
|
|
* for the other ILT clients), to be efficient we want to support
|
|
* allocation of sub-page-size in the last entry.
|
|
* 3. Context pointers are used by the driver to pass to FW / update
|
|
* the context (for the other ILT clients the pointers are used just to
|
|
* free the memory during unload).
|
|
*/
|
|
context_size = (sizeof(union cdu_context) * BXE_L2_CID_COUNT(sc));
|
|
for (i = 0, allocated = 0; allocated < context_size; i++) {
|
|
sc->context[i].size = min(CDU_ILT_PAGE_SZ,
|
|
(context_size - allocated));
|
|
|
|
if (bxe_dma_alloc(sc, sc->context[i].size,
|
|
&sc->context[i].vcxt_dma,
|
|
"cdu context") != 0) {
|
|
bxe_free_mem(sc);
|
|
return (-1);
|
|
}
|
|
|
|
sc->context[i].vcxt =
|
|
(union cdu_context *)sc->context[i].vcxt_dma.vaddr;
|
|
|
|
allocated += sc->context[i].size;
|
|
}
|
|
|
|
bxe_alloc_ilt_lines_mem(sc);
|
|
|
|
BLOGD(sc, DBG_LOAD, "ilt=%p start_line=%u lines=%p\n",
|
|
sc->ilt, sc->ilt->start_line, sc->ilt->lines);
|
|
{
|
|
for (i = 0; i < 4; i++) {
|
|
BLOGD(sc, DBG_LOAD,
|
|
"c%d page_size=%u start=%u end=%u num=%u flags=0x%x\n",
|
|
i,
|
|
sc->ilt->clients[i].page_size,
|
|
sc->ilt->clients[i].start,
|
|
sc->ilt->clients[i].end,
|
|
sc->ilt->clients[i].client_num,
|
|
sc->ilt->clients[i].flags);
|
|
}
|
|
}
|
|
if (ecore_ilt_mem_op(sc, ILT_MEMOP_ALLOC)) {
|
|
BLOGE(sc, "ecore_ilt_mem_op ILT_MEMOP_ALLOC failed\n");
|
|
bxe_free_mem(sc);
|
|
return (-1);
|
|
}
|
|
|
|
#if 0
|
|
if (bxe_iov_alloc_mem(sc)) {
|
|
BLOGE(sc, "Failed to allocate memory for SRIOV\n");
|
|
bxe_free_mem(sc);
|
|
return (-1);
|
|
}
|
|
#endif
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bxe_free_rx_bd_chain(struct bxe_fastpath *fp)
|
|
{
|
|
struct bxe_softc *sc;
|
|
int i;
|
|
|
|
sc = fp->sc;
|
|
|
|
if (fp->rx_mbuf_tag == NULL) {
|
|
return;
|
|
}
|
|
|
|
/* free all mbufs and unload all maps */
|
|
for (i = 0; i < RX_BD_TOTAL; i++) {
|
|
if (fp->rx_mbuf_chain[i].m_map != NULL) {
|
|
bus_dmamap_sync(fp->rx_mbuf_tag,
|
|
fp->rx_mbuf_chain[i].m_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(fp->rx_mbuf_tag,
|
|
fp->rx_mbuf_chain[i].m_map);
|
|
}
|
|
|
|
if (fp->rx_mbuf_chain[i].m != NULL) {
|
|
m_freem(fp->rx_mbuf_chain[i].m);
|
|
fp->rx_mbuf_chain[i].m = NULL;
|
|
fp->eth_q_stats.mbuf_alloc_rx--;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_free_tpa_pool(struct bxe_fastpath *fp)
|
|
{
|
|
struct bxe_softc *sc;
|
|
int i, max_agg_queues;
|
|
|
|
sc = fp->sc;
|
|
|
|
if (fp->rx_mbuf_tag == NULL) {
|
|
return;
|
|
}
|
|
|
|
max_agg_queues = MAX_AGG_QS(sc);
|
|
|
|
/* release all mbufs and unload all DMA maps in the TPA pool */
|
|
for (i = 0; i < max_agg_queues; i++) {
|
|
if (fp->rx_tpa_info[i].bd.m_map != NULL) {
|
|
bus_dmamap_sync(fp->rx_mbuf_tag,
|
|
fp->rx_tpa_info[i].bd.m_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(fp->rx_mbuf_tag,
|
|
fp->rx_tpa_info[i].bd.m_map);
|
|
}
|
|
|
|
if (fp->rx_tpa_info[i].bd.m != NULL) {
|
|
m_freem(fp->rx_tpa_info[i].bd.m);
|
|
fp->rx_tpa_info[i].bd.m = NULL;
|
|
fp->eth_q_stats.mbuf_alloc_tpa--;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_free_sge_chain(struct bxe_fastpath *fp)
|
|
{
|
|
struct bxe_softc *sc;
|
|
int i;
|
|
|
|
sc = fp->sc;
|
|
|
|
if (fp->rx_sge_mbuf_tag == NULL) {
|
|
return;
|
|
}
|
|
|
|
/* rree all mbufs and unload all maps */
|
|
for (i = 0; i < RX_SGE_TOTAL; i++) {
|
|
if (fp->rx_sge_mbuf_chain[i].m_map != NULL) {
|
|
bus_dmamap_sync(fp->rx_sge_mbuf_tag,
|
|
fp->rx_sge_mbuf_chain[i].m_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(fp->rx_sge_mbuf_tag,
|
|
fp->rx_sge_mbuf_chain[i].m_map);
|
|
}
|
|
|
|
if (fp->rx_sge_mbuf_chain[i].m != NULL) {
|
|
m_freem(fp->rx_sge_mbuf_chain[i].m);
|
|
fp->rx_sge_mbuf_chain[i].m = NULL;
|
|
fp->eth_q_stats.mbuf_alloc_sge--;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_free_fp_buffers(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_fastpath *fp;
|
|
int i;
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
|
|
#if __FreeBSD_version >= 800000
|
|
if (fp->tx_br != NULL) {
|
|
struct mbuf *m;
|
|
/* just in case bxe_mq_flush() wasn't called */
|
|
while ((m = buf_ring_dequeue_sc(fp->tx_br)) != NULL) {
|
|
m_freem(m);
|
|
}
|
|
buf_ring_free(fp->tx_br, M_DEVBUF);
|
|
fp->tx_br = NULL;
|
|
}
|
|
#endif
|
|
|
|
/* free all RX buffers */
|
|
bxe_free_rx_bd_chain(fp);
|
|
bxe_free_tpa_pool(fp);
|
|
bxe_free_sge_chain(fp);
|
|
|
|
if (fp->eth_q_stats.mbuf_alloc_rx != 0) {
|
|
BLOGE(sc, "failed to claim all rx mbufs (%d left)\n",
|
|
fp->eth_q_stats.mbuf_alloc_rx);
|
|
}
|
|
|
|
if (fp->eth_q_stats.mbuf_alloc_sge != 0) {
|
|
BLOGE(sc, "failed to claim all sge mbufs (%d left)\n",
|
|
fp->eth_q_stats.mbuf_alloc_sge);
|
|
}
|
|
|
|
if (fp->eth_q_stats.mbuf_alloc_tpa != 0) {
|
|
BLOGE(sc, "failed to claim all sge mbufs (%d left)\n",
|
|
fp->eth_q_stats.mbuf_alloc_tpa);
|
|
}
|
|
|
|
if (fp->eth_q_stats.mbuf_alloc_tx != 0) {
|
|
BLOGE(sc, "failed to release tx mbufs (%d left)\n",
|
|
fp->eth_q_stats.mbuf_alloc_tx);
|
|
}
|
|
|
|
/* XXX verify all mbufs were reclaimed */
|
|
|
|
if (mtx_initialized(&fp->tx_mtx)) {
|
|
mtx_destroy(&fp->tx_mtx);
|
|
}
|
|
|
|
if (mtx_initialized(&fp->rx_mtx)) {
|
|
mtx_destroy(&fp->rx_mtx);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
bxe_alloc_rx_bd_mbuf(struct bxe_fastpath *fp,
|
|
uint16_t prev_index,
|
|
uint16_t index)
|
|
{
|
|
struct bxe_sw_rx_bd *rx_buf;
|
|
struct eth_rx_bd *rx_bd;
|
|
bus_dma_segment_t segs[1];
|
|
bus_dmamap_t map;
|
|
struct mbuf *m;
|
|
int nsegs, rc;
|
|
|
|
rc = 0;
|
|
|
|
/* allocate the new RX BD mbuf */
|
|
m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, fp->mbuf_alloc_size);
|
|
if (__predict_false(m == NULL)) {
|
|
fp->eth_q_stats.mbuf_rx_bd_alloc_failed++;
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
fp->eth_q_stats.mbuf_alloc_rx++;
|
|
|
|
/* initialize the mbuf buffer length */
|
|
m->m_pkthdr.len = m->m_len = fp->rx_buf_size;
|
|
|
|
/* map the mbuf into non-paged pool */
|
|
rc = bus_dmamap_load_mbuf_sg(fp->rx_mbuf_tag,
|
|
fp->rx_mbuf_spare_map,
|
|
m, segs, &nsegs, BUS_DMA_NOWAIT);
|
|
if (__predict_false(rc != 0)) {
|
|
fp->eth_q_stats.mbuf_rx_bd_mapping_failed++;
|
|
m_freem(m);
|
|
fp->eth_q_stats.mbuf_alloc_rx--;
|
|
return (rc);
|
|
}
|
|
|
|
/* all mbufs must map to a single segment */
|
|
KASSERT((nsegs == 1), ("Too many segments, %d returned!", nsegs));
|
|
|
|
/* release any existing RX BD mbuf mappings */
|
|
|
|
if (prev_index != index) {
|
|
rx_buf = &fp->rx_mbuf_chain[prev_index];
|
|
|
|
if (rx_buf->m_map != NULL) {
|
|
bus_dmamap_sync(fp->rx_mbuf_tag, rx_buf->m_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(fp->rx_mbuf_tag, rx_buf->m_map);
|
|
}
|
|
|
|
/*
|
|
* We only get here from bxe_rxeof() when the maximum number
|
|
* of rx buffers is less than RX_BD_USABLE. bxe_rxeof() already
|
|
* holds the mbuf in the prev_index so it's OK to NULL it out
|
|
* here without concern of a memory leak.
|
|
*/
|
|
fp->rx_mbuf_chain[prev_index].m = NULL;
|
|
}
|
|
|
|
rx_buf = &fp->rx_mbuf_chain[index];
|
|
|
|
if (rx_buf->m_map != NULL) {
|
|
bus_dmamap_sync(fp->rx_mbuf_tag, rx_buf->m_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(fp->rx_mbuf_tag, rx_buf->m_map);
|
|
}
|
|
|
|
/* save the mbuf and mapping info for a future packet */
|
|
map = (prev_index != index) ?
|
|
fp->rx_mbuf_chain[prev_index].m_map : rx_buf->m_map;
|
|
rx_buf->m_map = fp->rx_mbuf_spare_map;
|
|
fp->rx_mbuf_spare_map = map;
|
|
bus_dmamap_sync(fp->rx_mbuf_tag, rx_buf->m_map,
|
|
BUS_DMASYNC_PREREAD);
|
|
rx_buf->m = m;
|
|
|
|
rx_bd = &fp->rx_chain[index];
|
|
rx_bd->addr_hi = htole32(U64_HI(segs[0].ds_addr));
|
|
rx_bd->addr_lo = htole32(U64_LO(segs[0].ds_addr));
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static int
|
|
bxe_alloc_rx_tpa_mbuf(struct bxe_fastpath *fp,
|
|
int queue)
|
|
{
|
|
struct bxe_sw_tpa_info *tpa_info = &fp->rx_tpa_info[queue];
|
|
bus_dma_segment_t segs[1];
|
|
bus_dmamap_t map;
|
|
struct mbuf *m;
|
|
int nsegs;
|
|
int rc = 0;
|
|
|
|
/* allocate the new TPA mbuf */
|
|
m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, fp->mbuf_alloc_size);
|
|
if (__predict_false(m == NULL)) {
|
|
fp->eth_q_stats.mbuf_rx_tpa_alloc_failed++;
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
fp->eth_q_stats.mbuf_alloc_tpa++;
|
|
|
|
/* initialize the mbuf buffer length */
|
|
m->m_pkthdr.len = m->m_len = fp->rx_buf_size;
|
|
|
|
/* map the mbuf into non-paged pool */
|
|
rc = bus_dmamap_load_mbuf_sg(fp->rx_mbuf_tag,
|
|
fp->rx_tpa_info_mbuf_spare_map,
|
|
m, segs, &nsegs, BUS_DMA_NOWAIT);
|
|
if (__predict_false(rc != 0)) {
|
|
fp->eth_q_stats.mbuf_rx_tpa_mapping_failed++;
|
|
m_free(m);
|
|
fp->eth_q_stats.mbuf_alloc_tpa--;
|
|
return (rc);
|
|
}
|
|
|
|
/* all mbufs must map to a single segment */
|
|
KASSERT((nsegs == 1), ("Too many segments, %d returned!", nsegs));
|
|
|
|
/* release any existing TPA mbuf mapping */
|
|
if (tpa_info->bd.m_map != NULL) {
|
|
bus_dmamap_sync(fp->rx_mbuf_tag, tpa_info->bd.m_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(fp->rx_mbuf_tag, tpa_info->bd.m_map);
|
|
}
|
|
|
|
/* save the mbuf and mapping info for the TPA mbuf */
|
|
map = tpa_info->bd.m_map;
|
|
tpa_info->bd.m_map = fp->rx_tpa_info_mbuf_spare_map;
|
|
fp->rx_tpa_info_mbuf_spare_map = map;
|
|
bus_dmamap_sync(fp->rx_mbuf_tag, tpa_info->bd.m_map,
|
|
BUS_DMASYNC_PREREAD);
|
|
tpa_info->bd.m = m;
|
|
tpa_info->seg = segs[0];
|
|
|
|
return (rc);
|
|
}
|
|
|
|
/*
|
|
* Allocate an mbuf and assign it to the receive scatter gather chain. The
|
|
* caller must take care to save a copy of the existing mbuf in the SG mbuf
|
|
* chain.
|
|
*/
|
|
static int
|
|
bxe_alloc_rx_sge_mbuf(struct bxe_fastpath *fp,
|
|
uint16_t index)
|
|
{
|
|
struct bxe_sw_rx_bd *sge_buf;
|
|
struct eth_rx_sge *sge;
|
|
bus_dma_segment_t segs[1];
|
|
bus_dmamap_t map;
|
|
struct mbuf *m;
|
|
int nsegs;
|
|
int rc = 0;
|
|
|
|
/* allocate a new SGE mbuf */
|
|
m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, SGE_PAGE_SIZE);
|
|
if (__predict_false(m == NULL)) {
|
|
fp->eth_q_stats.mbuf_rx_sge_alloc_failed++;
|
|
return (ENOMEM);
|
|
}
|
|
|
|
fp->eth_q_stats.mbuf_alloc_sge++;
|
|
|
|
/* initialize the mbuf buffer length */
|
|
m->m_pkthdr.len = m->m_len = SGE_PAGE_SIZE;
|
|
|
|
/* map the SGE mbuf into non-paged pool */
|
|
rc = bus_dmamap_load_mbuf_sg(fp->rx_sge_mbuf_tag,
|
|
fp->rx_sge_mbuf_spare_map,
|
|
m, segs, &nsegs, BUS_DMA_NOWAIT);
|
|
if (__predict_false(rc != 0)) {
|
|
fp->eth_q_stats.mbuf_rx_sge_mapping_failed++;
|
|
m_freem(m);
|
|
fp->eth_q_stats.mbuf_alloc_sge--;
|
|
return (rc);
|
|
}
|
|
|
|
/* all mbufs must map to a single segment */
|
|
KASSERT((nsegs == 1), ("Too many segments, %d returned!", nsegs));
|
|
|
|
sge_buf = &fp->rx_sge_mbuf_chain[index];
|
|
|
|
/* release any existing SGE mbuf mapping */
|
|
if (sge_buf->m_map != NULL) {
|
|
bus_dmamap_sync(fp->rx_sge_mbuf_tag, sge_buf->m_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(fp->rx_sge_mbuf_tag, sge_buf->m_map);
|
|
}
|
|
|
|
/* save the mbuf and mapping info for a future packet */
|
|
map = sge_buf->m_map;
|
|
sge_buf->m_map = fp->rx_sge_mbuf_spare_map;
|
|
fp->rx_sge_mbuf_spare_map = map;
|
|
bus_dmamap_sync(fp->rx_sge_mbuf_tag, sge_buf->m_map,
|
|
BUS_DMASYNC_PREREAD);
|
|
sge_buf->m = m;
|
|
|
|
sge = &fp->rx_sge_chain[index];
|
|
sge->addr_hi = htole32(U64_HI(segs[0].ds_addr));
|
|
sge->addr_lo = htole32(U64_LO(segs[0].ds_addr));
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static __noinline int
|
|
bxe_alloc_fp_buffers(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_fastpath *fp;
|
|
int i, j, rc = 0;
|
|
int ring_prod, cqe_ring_prod;
|
|
int max_agg_queues;
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
|
|
#if __FreeBSD_version >= 800000
|
|
fp->tx_br = buf_ring_alloc(BXE_BR_SIZE, M_DEVBUF,
|
|
M_NOWAIT, &fp->tx_mtx);
|
|
if (fp->tx_br == NULL) {
|
|
BLOGE(sc, "buf_ring alloc fail for fp[%02d]\n", i);
|
|
goto bxe_alloc_fp_buffers_error;
|
|
}
|
|
#endif
|
|
|
|
ring_prod = cqe_ring_prod = 0;
|
|
fp->rx_bd_cons = 0;
|
|
fp->rx_cq_cons = 0;
|
|
|
|
/* allocate buffers for the RX BDs in RX BD chain */
|
|
for (j = 0; j < sc->max_rx_bufs; j++) {
|
|
rc = bxe_alloc_rx_bd_mbuf(fp, ring_prod, ring_prod);
|
|
if (rc != 0) {
|
|
BLOGE(sc, "mbuf alloc fail for fp[%02d] rx chain (%d)\n",
|
|
i, rc);
|
|
goto bxe_alloc_fp_buffers_error;
|
|
}
|
|
|
|
ring_prod = RX_BD_NEXT(ring_prod);
|
|
cqe_ring_prod = RCQ_NEXT(cqe_ring_prod);
|
|
}
|
|
|
|
fp->rx_bd_prod = ring_prod;
|
|
fp->rx_cq_prod = cqe_ring_prod;
|
|
fp->eth_q_stats.rx_calls = fp->eth_q_stats.rx_pkts = 0;
|
|
|
|
if (if_getcapenable(sc->ifp) & IFCAP_LRO) {
|
|
max_agg_queues = MAX_AGG_QS(sc);
|
|
|
|
fp->tpa_enable = TRUE;
|
|
|
|
/* fill the TPA pool */
|
|
for (j = 0; j < max_agg_queues; j++) {
|
|
rc = bxe_alloc_rx_tpa_mbuf(fp, j);
|
|
if (rc != 0) {
|
|
BLOGE(sc, "mbuf alloc fail for fp[%02d] TPA queue %d\n",
|
|
i, j);
|
|
fp->tpa_enable = FALSE;
|
|
goto bxe_alloc_fp_buffers_error;
|
|
}
|
|
|
|
fp->rx_tpa_info[j].state = BXE_TPA_STATE_STOP;
|
|
}
|
|
|
|
if (fp->tpa_enable) {
|
|
/* fill the RX SGE chain */
|
|
ring_prod = 0;
|
|
for (j = 0; j < RX_SGE_USABLE; j++) {
|
|
rc = bxe_alloc_rx_sge_mbuf(fp, ring_prod);
|
|
if (rc != 0) {
|
|
BLOGE(sc, "mbuf alloc fail for fp[%02d] SGE %d\n",
|
|
i, ring_prod);
|
|
fp->tpa_enable = FALSE;
|
|
ring_prod = 0;
|
|
goto bxe_alloc_fp_buffers_error;
|
|
}
|
|
|
|
ring_prod = RX_SGE_NEXT(ring_prod);
|
|
}
|
|
|
|
fp->rx_sge_prod = ring_prod;
|
|
}
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
|
|
bxe_alloc_fp_buffers_error:
|
|
|
|
/* unwind what was already allocated */
|
|
bxe_free_rx_bd_chain(fp);
|
|
bxe_free_tpa_pool(fp);
|
|
bxe_free_sge_chain(fp);
|
|
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
static void
|
|
bxe_free_fw_stats_mem(struct bxe_softc *sc)
|
|
{
|
|
bxe_dma_free(sc, &sc->fw_stats_dma);
|
|
|
|
sc->fw_stats_num = 0;
|
|
|
|
sc->fw_stats_req_size = 0;
|
|
sc->fw_stats_req = NULL;
|
|
sc->fw_stats_req_mapping = 0;
|
|
|
|
sc->fw_stats_data_size = 0;
|
|
sc->fw_stats_data = NULL;
|
|
sc->fw_stats_data_mapping = 0;
|
|
}
|
|
|
|
static int
|
|
bxe_alloc_fw_stats_mem(struct bxe_softc *sc)
|
|
{
|
|
uint8_t num_queue_stats;
|
|
int num_groups;
|
|
|
|
/* number of queues for statistics is number of eth queues */
|
|
num_queue_stats = BXE_NUM_ETH_QUEUES(sc);
|
|
|
|
/*
|
|
* Total number of FW statistics requests =
|
|
* 1 for port stats + 1 for PF stats + num of queues
|
|
*/
|
|
sc->fw_stats_num = (2 + num_queue_stats);
|
|
|
|
/*
|
|
* Request is built from stats_query_header and an array of
|
|
* stats_query_cmd_group each of which contains STATS_QUERY_CMD_COUNT
|
|
* rules. The real number or requests is configured in the
|
|
* stats_query_header.
|
|
*/
|
|
num_groups =
|
|
((sc->fw_stats_num / STATS_QUERY_CMD_COUNT) +
|
|
((sc->fw_stats_num % STATS_QUERY_CMD_COUNT) ? 1 : 0));
|
|
|
|
BLOGD(sc, DBG_LOAD, "stats fw_stats_num %d num_groups %d\n",
|
|
sc->fw_stats_num, num_groups);
|
|
|
|
sc->fw_stats_req_size =
|
|
(sizeof(struct stats_query_header) +
|
|
(num_groups * sizeof(struct stats_query_cmd_group)));
|
|
|
|
/*
|
|
* Data for statistics requests + stats_counter.
|
|
* stats_counter holds per-STORM counters that are incremented when
|
|
* STORM has finished with the current request. Memory for FCoE
|
|
* offloaded statistics are counted anyway, even if they will not be sent.
|
|
* VF stats are not accounted for here as the data of VF stats is stored
|
|
* in memory allocated by the VF, not here.
|
|
*/
|
|
sc->fw_stats_data_size =
|
|
(sizeof(struct stats_counter) +
|
|
sizeof(struct per_port_stats) +
|
|
sizeof(struct per_pf_stats) +
|
|
/* sizeof(struct fcoe_statistics_params) + */
|
|
(sizeof(struct per_queue_stats) * num_queue_stats));
|
|
|
|
if (bxe_dma_alloc(sc, (sc->fw_stats_req_size + sc->fw_stats_data_size),
|
|
&sc->fw_stats_dma, "fw stats") != 0) {
|
|
bxe_free_fw_stats_mem(sc);
|
|
return (-1);
|
|
}
|
|
|
|
/* set up the shortcuts */
|
|
|
|
sc->fw_stats_req =
|
|
(struct bxe_fw_stats_req *)sc->fw_stats_dma.vaddr;
|
|
sc->fw_stats_req_mapping = sc->fw_stats_dma.paddr;
|
|
|
|
sc->fw_stats_data =
|
|
(struct bxe_fw_stats_data *)((uint8_t *)sc->fw_stats_dma.vaddr +
|
|
sc->fw_stats_req_size);
|
|
sc->fw_stats_data_mapping = (sc->fw_stats_dma.paddr +
|
|
sc->fw_stats_req_size);
|
|
|
|
BLOGD(sc, DBG_LOAD, "statistics request base address set to %#jx\n",
|
|
(uintmax_t)sc->fw_stats_req_mapping);
|
|
|
|
BLOGD(sc, DBG_LOAD, "statistics data base address set to %#jx\n",
|
|
(uintmax_t)sc->fw_stats_data_mapping);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Bits map:
|
|
* 0-7 - Engine0 load counter.
|
|
* 8-15 - Engine1 load counter.
|
|
* 16 - Engine0 RESET_IN_PROGRESS bit.
|
|
* 17 - Engine1 RESET_IN_PROGRESS bit.
|
|
* 18 - Engine0 ONE_IS_LOADED. Set when there is at least one active
|
|
* function on the engine
|
|
* 19 - Engine1 ONE_IS_LOADED.
|
|
* 20 - Chip reset flow bit. When set none-leader must wait for both engines
|
|
* leader to complete (check for both RESET_IN_PROGRESS bits and not
|
|
* for just the one belonging to its engine).
|
|
*/
|
|
#define BXE_RECOVERY_GLOB_REG MISC_REG_GENERIC_POR_1
|
|
#define BXE_PATH0_LOAD_CNT_MASK 0x000000ff
|
|
#define BXE_PATH0_LOAD_CNT_SHIFT 0
|
|
#define BXE_PATH1_LOAD_CNT_MASK 0x0000ff00
|
|
#define BXE_PATH1_LOAD_CNT_SHIFT 8
|
|
#define BXE_PATH0_RST_IN_PROG_BIT 0x00010000
|
|
#define BXE_PATH1_RST_IN_PROG_BIT 0x00020000
|
|
#define BXE_GLOBAL_RESET_BIT 0x00040000
|
|
|
|
/* set the GLOBAL_RESET bit, should be run under rtnl lock */
|
|
static void
|
|
bxe_set_reset_global(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
val = REG_RD(sc, BXE_RECOVERY_GLOB_REG);
|
|
REG_WR(sc, BXE_RECOVERY_GLOB_REG, val | BXE_GLOBAL_RESET_BIT);
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
}
|
|
|
|
/* clear the GLOBAL_RESET bit, should be run under rtnl lock */
|
|
static void
|
|
bxe_clear_reset_global(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
val = REG_RD(sc, BXE_RECOVERY_GLOB_REG);
|
|
REG_WR(sc, BXE_RECOVERY_GLOB_REG, val & (~BXE_GLOBAL_RESET_BIT));
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
}
|
|
|
|
/* checks the GLOBAL_RESET bit, should be run under rtnl lock */
|
|
static uint8_t
|
|
bxe_reset_is_global(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val = REG_RD(sc, BXE_RECOVERY_GLOB_REG);
|
|
BLOGD(sc, DBG_LOAD, "GLOB_REG=0x%08x\n", val);
|
|
return (val & BXE_GLOBAL_RESET_BIT) ? TRUE : FALSE;
|
|
}
|
|
|
|
/* clear RESET_IN_PROGRESS bit for the engine, should be run under rtnl lock */
|
|
static void
|
|
bxe_set_reset_done(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
uint32_t bit = SC_PATH(sc) ? BXE_PATH1_RST_IN_PROG_BIT :
|
|
BXE_PATH0_RST_IN_PROG_BIT;
|
|
|
|
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
|
|
val = REG_RD(sc, BXE_RECOVERY_GLOB_REG);
|
|
/* Clear the bit */
|
|
val &= ~bit;
|
|
REG_WR(sc, BXE_RECOVERY_GLOB_REG, val);
|
|
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
}
|
|
|
|
/* set RESET_IN_PROGRESS for the engine, should be run under rtnl lock */
|
|
static void
|
|
bxe_set_reset_in_progress(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
uint32_t bit = SC_PATH(sc) ? BXE_PATH1_RST_IN_PROG_BIT :
|
|
BXE_PATH0_RST_IN_PROG_BIT;
|
|
|
|
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
|
|
val = REG_RD(sc, BXE_RECOVERY_GLOB_REG);
|
|
/* Set the bit */
|
|
val |= bit;
|
|
REG_WR(sc, BXE_RECOVERY_GLOB_REG, val);
|
|
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
}
|
|
|
|
/* check RESET_IN_PROGRESS bit for an engine, should be run under rtnl lock */
|
|
static uint8_t
|
|
bxe_reset_is_done(struct bxe_softc *sc,
|
|
int engine)
|
|
{
|
|
uint32_t val = REG_RD(sc, BXE_RECOVERY_GLOB_REG);
|
|
uint32_t bit = engine ? BXE_PATH1_RST_IN_PROG_BIT :
|
|
BXE_PATH0_RST_IN_PROG_BIT;
|
|
|
|
/* return false if bit is set */
|
|
return (val & bit) ? FALSE : TRUE;
|
|
}
|
|
|
|
/* get the load status for an engine, should be run under rtnl lock */
|
|
static uint8_t
|
|
bxe_get_load_status(struct bxe_softc *sc,
|
|
int engine)
|
|
{
|
|
uint32_t mask = engine ? BXE_PATH1_LOAD_CNT_MASK :
|
|
BXE_PATH0_LOAD_CNT_MASK;
|
|
uint32_t shift = engine ? BXE_PATH1_LOAD_CNT_SHIFT :
|
|
BXE_PATH0_LOAD_CNT_SHIFT;
|
|
uint32_t val = REG_RD(sc, BXE_RECOVERY_GLOB_REG);
|
|
|
|
BLOGD(sc, DBG_LOAD, "Old value for GLOB_REG=0x%08x\n", val);
|
|
|
|
val = ((val & mask) >> shift);
|
|
|
|
BLOGD(sc, DBG_LOAD, "Load mask engine %d = 0x%08x\n", engine, val);
|
|
|
|
return (val != 0);
|
|
}
|
|
|
|
/* set pf load mark */
|
|
/* XXX needs to be under rtnl lock */
|
|
static void
|
|
bxe_set_pf_load(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
uint32_t val1;
|
|
uint32_t mask = SC_PATH(sc) ? BXE_PATH1_LOAD_CNT_MASK :
|
|
BXE_PATH0_LOAD_CNT_MASK;
|
|
uint32_t shift = SC_PATH(sc) ? BXE_PATH1_LOAD_CNT_SHIFT :
|
|
BXE_PATH0_LOAD_CNT_SHIFT;
|
|
|
|
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
|
|
val = REG_RD(sc, BXE_RECOVERY_GLOB_REG);
|
|
BLOGD(sc, DBG_LOAD, "Old value for GLOB_REG=0x%08x\n", val);
|
|
|
|
/* get the current counter value */
|
|
val1 = ((val & mask) >> shift);
|
|
|
|
/* set bit of this PF */
|
|
val1 |= (1 << SC_ABS_FUNC(sc));
|
|
|
|
/* clear the old value */
|
|
val &= ~mask;
|
|
|
|
/* set the new one */
|
|
val |= ((val1 << shift) & mask);
|
|
|
|
REG_WR(sc, BXE_RECOVERY_GLOB_REG, val);
|
|
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
}
|
|
|
|
/* clear pf load mark */
|
|
/* XXX needs to be under rtnl lock */
|
|
static uint8_t
|
|
bxe_clear_pf_load(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val1, val;
|
|
uint32_t mask = SC_PATH(sc) ? BXE_PATH1_LOAD_CNT_MASK :
|
|
BXE_PATH0_LOAD_CNT_MASK;
|
|
uint32_t shift = SC_PATH(sc) ? BXE_PATH1_LOAD_CNT_SHIFT :
|
|
BXE_PATH0_LOAD_CNT_SHIFT;
|
|
|
|
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
val = REG_RD(sc, BXE_RECOVERY_GLOB_REG);
|
|
BLOGD(sc, DBG_LOAD, "Old GEN_REG_VAL=0x%08x\n", val);
|
|
|
|
/* get the current counter value */
|
|
val1 = (val & mask) >> shift;
|
|
|
|
/* clear bit of that PF */
|
|
val1 &= ~(1 << SC_ABS_FUNC(sc));
|
|
|
|
/* clear the old value */
|
|
val &= ~mask;
|
|
|
|
/* set the new one */
|
|
val |= ((val1 << shift) & mask);
|
|
|
|
REG_WR(sc, BXE_RECOVERY_GLOB_REG, val);
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
return (val1 != 0);
|
|
}
|
|
|
|
/* send load requrest to mcp and analyze response */
|
|
static int
|
|
bxe_nic_load_request(struct bxe_softc *sc,
|
|
uint32_t *load_code)
|
|
{
|
|
/* init fw_seq */
|
|
sc->fw_seq =
|
|
(SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_mb_header) &
|
|
DRV_MSG_SEQ_NUMBER_MASK);
|
|
|
|
BLOGD(sc, DBG_LOAD, "initial fw_seq 0x%04x\n", sc->fw_seq);
|
|
|
|
/* get the current FW pulse sequence */
|
|
sc->fw_drv_pulse_wr_seq =
|
|
(SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_pulse_mb) &
|
|
DRV_PULSE_SEQ_MASK);
|
|
|
|
BLOGD(sc, DBG_LOAD, "initial drv_pulse 0x%04x\n",
|
|
sc->fw_drv_pulse_wr_seq);
|
|
|
|
/* load request */
|
|
(*load_code) = bxe_fw_command(sc, DRV_MSG_CODE_LOAD_REQ,
|
|
DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
|
|
|
|
/* if the MCP fails to respond we must abort */
|
|
if (!(*load_code)) {
|
|
BLOGE(sc, "MCP response failure!\n");
|
|
return (-1);
|
|
}
|
|
|
|
/* if MCP refused then must abort */
|
|
if ((*load_code) == FW_MSG_CODE_DRV_LOAD_REFUSED) {
|
|
BLOGE(sc, "MCP refused load request\n");
|
|
return (-1);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Check whether another PF has already loaded FW to chip. In virtualized
|
|
* environments a pf from anoth VM may have already initialized the device
|
|
* including loading FW.
|
|
*/
|
|
static int
|
|
bxe_nic_load_analyze_req(struct bxe_softc *sc,
|
|
uint32_t load_code)
|
|
{
|
|
uint32_t my_fw, loaded_fw;
|
|
|
|
/* is another pf loaded on this engine? */
|
|
if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) &&
|
|
(load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) {
|
|
/* build my FW version dword */
|
|
my_fw = (BCM_5710_FW_MAJOR_VERSION +
|
|
(BCM_5710_FW_MINOR_VERSION << 8 ) +
|
|
(BCM_5710_FW_REVISION_VERSION << 16) +
|
|
(BCM_5710_FW_ENGINEERING_VERSION << 24));
|
|
|
|
/* read loaded FW from chip */
|
|
loaded_fw = REG_RD(sc, XSEM_REG_PRAM);
|
|
BLOGD(sc, DBG_LOAD, "loaded FW 0x%08x / my FW 0x%08x\n",
|
|
loaded_fw, my_fw);
|
|
|
|
/* abort nic load if version mismatch */
|
|
if (my_fw != loaded_fw) {
|
|
BLOGE(sc, "FW 0x%08x already loaded (mine is 0x%08x)",
|
|
loaded_fw, my_fw);
|
|
return (-1);
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/* mark PMF if applicable */
|
|
static void
|
|
bxe_nic_load_pmf(struct bxe_softc *sc,
|
|
uint32_t load_code)
|
|
{
|
|
uint32_t ncsi_oem_data_addr;
|
|
|
|
if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
|
|
(load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) ||
|
|
(load_code == FW_MSG_CODE_DRV_LOAD_PORT)) {
|
|
/*
|
|
* Barrier here for ordering between the writing to sc->port.pmf here
|
|
* and reading it from the periodic task.
|
|
*/
|
|
sc->port.pmf = 1;
|
|
mb();
|
|
} else {
|
|
sc->port.pmf = 0;
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "pmf %d\n", sc->port.pmf);
|
|
|
|
/* XXX needed? */
|
|
if (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) {
|
|
if (SHMEM2_HAS(sc, ncsi_oem_data_addr)) {
|
|
ncsi_oem_data_addr = SHMEM2_RD(sc, ncsi_oem_data_addr);
|
|
if (ncsi_oem_data_addr) {
|
|
REG_WR(sc,
|
|
(ncsi_oem_data_addr +
|
|
offsetof(struct glob_ncsi_oem_data, driver_version)),
|
|
0);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_read_mf_cfg(struct bxe_softc *sc)
|
|
{
|
|
int n = (CHIP_IS_MODE_4_PORT(sc) ? 2 : 1);
|
|
int abs_func;
|
|
int vn;
|
|
|
|
if (BXE_NOMCP(sc)) {
|
|
return; /* what should be the default bvalue in this case */
|
|
}
|
|
|
|
/*
|
|
* The formula for computing the absolute function number is...
|
|
* For 2 port configuration (4 functions per port):
|
|
* abs_func = 2 * vn + SC_PORT + SC_PATH
|
|
* For 4 port configuration (2 functions per port):
|
|
* abs_func = 4 * vn + 2 * SC_PORT + SC_PATH
|
|
*/
|
|
for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
|
|
abs_func = (n * (2 * vn + SC_PORT(sc)) + SC_PATH(sc));
|
|
if (abs_func >= E1H_FUNC_MAX) {
|
|
break;
|
|
}
|
|
sc->devinfo.mf_info.mf_config[vn] =
|
|
MFCFG_RD(sc, func_mf_config[abs_func].config);
|
|
}
|
|
|
|
if (sc->devinfo.mf_info.mf_config[SC_VN(sc)] &
|
|
FUNC_MF_CFG_FUNC_DISABLED) {
|
|
BLOGD(sc, DBG_LOAD, "mf_cfg function disabled\n");
|
|
sc->flags |= BXE_MF_FUNC_DIS;
|
|
} else {
|
|
BLOGD(sc, DBG_LOAD, "mf_cfg function enabled\n");
|
|
sc->flags &= ~BXE_MF_FUNC_DIS;
|
|
}
|
|
}
|
|
|
|
/* acquire split MCP access lock register */
|
|
static int bxe_acquire_alr(struct bxe_softc *sc)
|
|
{
|
|
uint32_t j, val;
|
|
|
|
for (j = 0; j < 1000; j++) {
|
|
val = (1UL << 31);
|
|
REG_WR(sc, GRCBASE_MCP + 0x9c, val);
|
|
val = REG_RD(sc, GRCBASE_MCP + 0x9c);
|
|
if (val & (1L << 31))
|
|
break;
|
|
|
|
DELAY(5000);
|
|
}
|
|
|
|
if (!(val & (1L << 31))) {
|
|
BLOGE(sc, "Cannot acquire MCP access lock register\n");
|
|
return (-1);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/* release split MCP access lock register */
|
|
static void bxe_release_alr(struct bxe_softc *sc)
|
|
{
|
|
REG_WR(sc, GRCBASE_MCP + 0x9c, 0);
|
|
}
|
|
|
|
static void
|
|
bxe_fan_failure(struct bxe_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t ext_phy_config;
|
|
|
|
/* mark the failure */
|
|
ext_phy_config =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].external_phy_config);
|
|
|
|
ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
|
|
ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
|
|
SHMEM_WR(sc, dev_info.port_hw_config[port].external_phy_config,
|
|
ext_phy_config);
|
|
|
|
/* log the failure */
|
|
BLOGW(sc, "Fan Failure has caused the driver to shutdown "
|
|
"the card to prevent permanent damage. "
|
|
"Please contact OEM Support for assistance\n");
|
|
|
|
/* XXX */
|
|
#if 1
|
|
bxe_panic(sc, ("Schedule task to handle fan failure\n"));
|
|
#else
|
|
/*
|
|
* Schedule device reset (unload)
|
|
* This is due to some boards consuming sufficient power when driver is
|
|
* up to overheat if fan fails.
|
|
*/
|
|
bxe_set_bit(BXE_SP_RTNL_FAN_FAILURE, &sc->sp_rtnl_state);
|
|
schedule_delayed_work(&sc->sp_rtnl_task, 0);
|
|
#endif
|
|
}
|
|
|
|
/* this function is called upon a link interrupt */
|
|
static void
|
|
bxe_link_attn(struct bxe_softc *sc)
|
|
{
|
|
uint32_t pause_enabled = 0;
|
|
struct host_port_stats *pstats;
|
|
int cmng_fns;
|
|
|
|
/* Make sure that we are synced with the current statistics */
|
|
bxe_stats_handle(sc, STATS_EVENT_STOP);
|
|
|
|
elink_link_update(&sc->link_params, &sc->link_vars);
|
|
|
|
if (sc->link_vars.link_up) {
|
|
|
|
/* dropless flow control */
|
|
if (!CHIP_IS_E1(sc) && sc->dropless_fc) {
|
|
pause_enabled = 0;
|
|
|
|
if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_TX) {
|
|
pause_enabled = 1;
|
|
}
|
|
|
|
REG_WR(sc,
|
|
(BAR_USTRORM_INTMEM +
|
|
USTORM_ETH_PAUSE_ENABLED_OFFSET(SC_PORT(sc))),
|
|
pause_enabled);
|
|
}
|
|
|
|
if (sc->link_vars.mac_type != ELINK_MAC_TYPE_EMAC) {
|
|
pstats = BXE_SP(sc, port_stats);
|
|
/* reset old mac stats */
|
|
memset(&(pstats->mac_stx[0]), 0, sizeof(struct mac_stx));
|
|
}
|
|
|
|
if (sc->state == BXE_STATE_OPEN) {
|
|
bxe_stats_handle(sc, STATS_EVENT_LINK_UP);
|
|
}
|
|
}
|
|
|
|
if (sc->link_vars.link_up && sc->link_vars.line_speed) {
|
|
cmng_fns = bxe_get_cmng_fns_mode(sc);
|
|
|
|
if (cmng_fns != CMNG_FNS_NONE) {
|
|
bxe_cmng_fns_init(sc, FALSE, cmng_fns);
|
|
storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
|
|
} else {
|
|
/* rate shaping and fairness are disabled */
|
|
BLOGD(sc, DBG_LOAD, "single function mode without fairness\n");
|
|
}
|
|
}
|
|
|
|
bxe_link_report_locked(sc);
|
|
|
|
if (IS_MF(sc)) {
|
|
; // XXX bxe_link_sync_notify(sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_attn_int_asserted(struct bxe_softc *sc,
|
|
uint32_t asserted)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
|
|
MISC_REG_AEU_MASK_ATTN_FUNC_0;
|
|
uint32_t nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
|
|
NIG_REG_MASK_INTERRUPT_PORT0;
|
|
uint32_t aeu_mask;
|
|
uint32_t nig_mask = 0;
|
|
uint32_t reg_addr;
|
|
uint32_t igu_acked;
|
|
uint32_t cnt;
|
|
|
|
if (sc->attn_state & asserted) {
|
|
BLOGE(sc, "IGU ERROR attn=0x%08x\n", asserted);
|
|
}
|
|
|
|
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
|
|
|
|
aeu_mask = REG_RD(sc, aeu_addr);
|
|
|
|
BLOGD(sc, DBG_INTR, "aeu_mask 0x%08x newly asserted 0x%08x\n",
|
|
aeu_mask, asserted);
|
|
|
|
aeu_mask &= ~(asserted & 0x3ff);
|
|
|
|
BLOGD(sc, DBG_INTR, "new mask 0x%08x\n", aeu_mask);
|
|
|
|
REG_WR(sc, aeu_addr, aeu_mask);
|
|
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
|
|
|
|
BLOGD(sc, DBG_INTR, "attn_state 0x%08x\n", sc->attn_state);
|
|
sc->attn_state |= asserted;
|
|
BLOGD(sc, DBG_INTR, "new state 0x%08x\n", sc->attn_state);
|
|
|
|
if (asserted & ATTN_HARD_WIRED_MASK) {
|
|
if (asserted & ATTN_NIG_FOR_FUNC) {
|
|
|
|
BXE_PHY_LOCK(sc);
|
|
|
|
/* save nig interrupt mask */
|
|
nig_mask = REG_RD(sc, nig_int_mask_addr);
|
|
|
|
/* If nig_mask is not set, no need to call the update function */
|
|
if (nig_mask) {
|
|
REG_WR(sc, nig_int_mask_addr, 0);
|
|
|
|
bxe_link_attn(sc);
|
|
}
|
|
|
|
/* handle unicore attn? */
|
|
}
|
|
|
|
if (asserted & ATTN_SW_TIMER_4_FUNC) {
|
|
BLOGD(sc, DBG_INTR, "ATTN_SW_TIMER_4_FUNC!\n");
|
|
}
|
|
|
|
if (asserted & GPIO_2_FUNC) {
|
|
BLOGD(sc, DBG_INTR, "GPIO_2_FUNC!\n");
|
|
}
|
|
|
|
if (asserted & GPIO_3_FUNC) {
|
|
BLOGD(sc, DBG_INTR, "GPIO_3_FUNC!\n");
|
|
}
|
|
|
|
if (asserted & GPIO_4_FUNC) {
|
|
BLOGD(sc, DBG_INTR, "GPIO_4_FUNC!\n");
|
|
}
|
|
|
|
if (port == 0) {
|
|
if (asserted & ATTN_GENERAL_ATTN_1) {
|
|
BLOGD(sc, DBG_INTR, "ATTN_GENERAL_ATTN_1!\n");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_1, 0x0);
|
|
}
|
|
if (asserted & ATTN_GENERAL_ATTN_2) {
|
|
BLOGD(sc, DBG_INTR, "ATTN_GENERAL_ATTN_2!\n");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_2, 0x0);
|
|
}
|
|
if (asserted & ATTN_GENERAL_ATTN_3) {
|
|
BLOGD(sc, DBG_INTR, "ATTN_GENERAL_ATTN_3!\n");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_3, 0x0);
|
|
}
|
|
} else {
|
|
if (asserted & ATTN_GENERAL_ATTN_4) {
|
|
BLOGD(sc, DBG_INTR, "ATTN_GENERAL_ATTN_4!\n");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_4, 0x0);
|
|
}
|
|
if (asserted & ATTN_GENERAL_ATTN_5) {
|
|
BLOGD(sc, DBG_INTR, "ATTN_GENERAL_ATTN_5!\n");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_5, 0x0);
|
|
}
|
|
if (asserted & ATTN_GENERAL_ATTN_6) {
|
|
BLOGD(sc, DBG_INTR, "ATTN_GENERAL_ATTN_6!\n");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_6, 0x0);
|
|
}
|
|
}
|
|
} /* hardwired */
|
|
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
reg_addr = (HC_REG_COMMAND_REG + port*32 + COMMAND_REG_ATTN_BITS_SET);
|
|
} else {
|
|
reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_SET_UPPER*8);
|
|
}
|
|
|
|
BLOGD(sc, DBG_INTR, "about to mask 0x%08x at %s addr 0x%08x\n",
|
|
asserted,
|
|
(sc->devinfo.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr);
|
|
REG_WR(sc, reg_addr, asserted);
|
|
|
|
/* now set back the mask */
|
|
if (asserted & ATTN_NIG_FOR_FUNC) {
|
|
/*
|
|
* Verify that IGU ack through BAR was written before restoring
|
|
* NIG mask. This loop should exit after 2-3 iterations max.
|
|
*/
|
|
if (sc->devinfo.int_block != INT_BLOCK_HC) {
|
|
cnt = 0;
|
|
|
|
do {
|
|
igu_acked = REG_RD(sc, IGU_REG_ATTENTION_ACK_BITS);
|
|
} while (((igu_acked & ATTN_NIG_FOR_FUNC) == 0) &&
|
|
(++cnt < MAX_IGU_ATTN_ACK_TO));
|
|
|
|
if (!igu_acked) {
|
|
BLOGE(sc, "Failed to verify IGU ack on time\n");
|
|
}
|
|
|
|
mb();
|
|
}
|
|
|
|
REG_WR(sc, nig_int_mask_addr, nig_mask);
|
|
|
|
BXE_PHY_UNLOCK(sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_print_next_block(struct bxe_softc *sc,
|
|
int idx,
|
|
const char *blk)
|
|
{
|
|
BLOGI(sc, "%s%s", idx ? ", " : "", blk);
|
|
}
|
|
|
|
static int
|
|
bxe_check_blocks_with_parity0(struct bxe_softc *sc,
|
|
uint32_t sig,
|
|
int par_num,
|
|
uint8_t print)
|
|
{
|
|
uint32_t cur_bit = 0;
|
|
int i = 0;
|
|
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((uint32_t)0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "BRB");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "PARSER");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "TSDM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "SEARCHER");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "TCM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "TSEMI");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "XPB");
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return (par_num);
|
|
}
|
|
|
|
static int
|
|
bxe_check_blocks_with_parity1(struct bxe_softc *sc,
|
|
uint32_t sig,
|
|
int par_num,
|
|
uint8_t *global,
|
|
uint8_t print)
|
|
{
|
|
int i = 0;
|
|
uint32_t cur_bit = 0;
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((uint32_t)0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "PBF");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "QM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "TM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "XSDM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "XCM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "XSEMI");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "DOORBELLQ");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "NIG");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "VAUX PCI CORE");
|
|
*global = TRUE;
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "DEBUG");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "USDM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "UCM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "USEMI");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "UPB");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "CSDM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "CCM");
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return (par_num);
|
|
}
|
|
|
|
static int
|
|
bxe_check_blocks_with_parity2(struct bxe_softc *sc,
|
|
uint32_t sig,
|
|
int par_num,
|
|
uint8_t print)
|
|
{
|
|
uint32_t cur_bit = 0;
|
|
int i = 0;
|
|
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((uint32_t)0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "CSEMI");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "PXP");
|
|
break;
|
|
case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "PXPPCICLOCKCLIENT");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "CFC");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "CDU");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "DMAE");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "IGU");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "MISC");
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return (par_num);
|
|
}
|
|
|
|
static int
|
|
bxe_check_blocks_with_parity3(struct bxe_softc *sc,
|
|
uint32_t sig,
|
|
int par_num,
|
|
uint8_t *global,
|
|
uint8_t print)
|
|
{
|
|
uint32_t cur_bit = 0;
|
|
int i = 0;
|
|
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((uint32_t)0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "MCP ROM");
|
|
*global = TRUE;
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++,
|
|
"MCP UMP RX");
|
|
*global = TRUE;
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++,
|
|
"MCP UMP TX");
|
|
*global = TRUE;
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++,
|
|
"MCP SCPAD");
|
|
*global = TRUE;
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return (par_num);
|
|
}
|
|
|
|
static int
|
|
bxe_check_blocks_with_parity4(struct bxe_softc *sc,
|
|
uint32_t sig,
|
|
int par_num,
|
|
uint8_t print)
|
|
{
|
|
uint32_t cur_bit = 0;
|
|
int i = 0;
|
|
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((uint32_t)0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "PGLUE_B");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR:
|
|
if (print)
|
|
bxe_print_next_block(sc, par_num++, "ATC");
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return (par_num);
|
|
}
|
|
|
|
static uint8_t
|
|
bxe_parity_attn(struct bxe_softc *sc,
|
|
uint8_t *global,
|
|
uint8_t print,
|
|
uint32_t *sig)
|
|
{
|
|
int par_num = 0;
|
|
|
|
if ((sig[0] & HW_PRTY_ASSERT_SET_0) ||
|
|
(sig[1] & HW_PRTY_ASSERT_SET_1) ||
|
|
(sig[2] & HW_PRTY_ASSERT_SET_2) ||
|
|
(sig[3] & HW_PRTY_ASSERT_SET_3) ||
|
|
(sig[4] & HW_PRTY_ASSERT_SET_4)) {
|
|
BLOGE(sc, "Parity error: HW block parity attention:\n"
|
|
"[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x [4]:0x%08x\n",
|
|
(uint32_t)(sig[0] & HW_PRTY_ASSERT_SET_0),
|
|
(uint32_t)(sig[1] & HW_PRTY_ASSERT_SET_1),
|
|
(uint32_t)(sig[2] & HW_PRTY_ASSERT_SET_2),
|
|
(uint32_t)(sig[3] & HW_PRTY_ASSERT_SET_3),
|
|
(uint32_t)(sig[4] & HW_PRTY_ASSERT_SET_4));
|
|
|
|
if (print)
|
|
BLOGI(sc, "Parity errors detected in blocks: ");
|
|
|
|
par_num =
|
|
bxe_check_blocks_with_parity0(sc, sig[0] &
|
|
HW_PRTY_ASSERT_SET_0,
|
|
par_num, print);
|
|
par_num =
|
|
bxe_check_blocks_with_parity1(sc, sig[1] &
|
|
HW_PRTY_ASSERT_SET_1,
|
|
par_num, global, print);
|
|
par_num =
|
|
bxe_check_blocks_with_parity2(sc, sig[2] &
|
|
HW_PRTY_ASSERT_SET_2,
|
|
par_num, print);
|
|
par_num =
|
|
bxe_check_blocks_with_parity3(sc, sig[3] &
|
|
HW_PRTY_ASSERT_SET_3,
|
|
par_num, global, print);
|
|
par_num =
|
|
bxe_check_blocks_with_parity4(sc, sig[4] &
|
|
HW_PRTY_ASSERT_SET_4,
|
|
par_num, print);
|
|
|
|
if (print)
|
|
BLOGI(sc, "\n");
|
|
|
|
return (TRUE);
|
|
}
|
|
|
|
return (FALSE);
|
|
}
|
|
|
|
static uint8_t
|
|
bxe_chk_parity_attn(struct bxe_softc *sc,
|
|
uint8_t *global,
|
|
uint8_t print)
|
|
{
|
|
struct attn_route attn = { {0} };
|
|
int port = SC_PORT(sc);
|
|
|
|
attn.sig[0] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port*4);
|
|
attn.sig[1] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port*4);
|
|
attn.sig[2] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port*4);
|
|
attn.sig[3] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port*4);
|
|
|
|
if (!CHIP_IS_E1x(sc))
|
|
attn.sig[4] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port*4);
|
|
|
|
return (bxe_parity_attn(sc, global, print, attn.sig));
|
|
}
|
|
|
|
static void
|
|
bxe_attn_int_deasserted4(struct bxe_softc *sc,
|
|
uint32_t attn)
|
|
{
|
|
uint32_t val;
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT) {
|
|
val = REG_RD(sc, PGLUE_B_REG_PGLUE_B_INT_STS_CLR);
|
|
BLOGE(sc, "PGLUE hw attention 0x%08x\n", val);
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR)
|
|
BLOGE(sc, "PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR\n");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR)
|
|
BLOGE(sc, "PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR\n");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN)
|
|
BLOGE(sc, "PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN\n");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN)
|
|
BLOGE(sc, "PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN\n");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN)
|
|
BLOGE(sc, "PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN\n");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN)
|
|
BLOGE(sc, "PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN\n");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN)
|
|
BLOGE(sc, "PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN\n");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN)
|
|
BLOGE(sc, "PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN\n");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW)
|
|
BLOGE(sc, "PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW\n");
|
|
}
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT) {
|
|
val = REG_RD(sc, ATC_REG_ATC_INT_STS_CLR);
|
|
BLOGE(sc, "ATC hw attention 0x%08x\n", val);
|
|
if (val & ATC_ATC_INT_STS_REG_ADDRESS_ERROR)
|
|
BLOGE(sc, "ATC_ATC_INT_STS_REG_ADDRESS_ERROR\n");
|
|
if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND)
|
|
BLOGE(sc, "ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND\n");
|
|
if (val & ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS)
|
|
BLOGE(sc, "ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS\n");
|
|
if (val & ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT)
|
|
BLOGE(sc, "ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT\n");
|
|
if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR)
|
|
BLOGE(sc, "ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR\n");
|
|
if (val & ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU)
|
|
BLOGE(sc, "ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU\n");
|
|
}
|
|
|
|
if (attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR |
|
|
AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)) {
|
|
BLOGE(sc, "FATAL parity attention set4 0x%08x\n",
|
|
(uint32_t)(attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR |
|
|
AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)));
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_e1h_disable(struct bxe_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
|
|
bxe_tx_disable(sc);
|
|
|
|
REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port*8, 0);
|
|
}
|
|
|
|
static void
|
|
bxe_e1h_enable(struct bxe_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
|
|
REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port*8, 1);
|
|
|
|
// XXX bxe_tx_enable(sc);
|
|
}
|
|
|
|
/*
|
|
* called due to MCP event (on pmf):
|
|
* reread new bandwidth configuration
|
|
* configure FW
|
|
* notify others function about the change
|
|
*/
|
|
static void
|
|
bxe_config_mf_bw(struct bxe_softc *sc)
|
|
{
|
|
if (sc->link_vars.link_up) {
|
|
bxe_cmng_fns_init(sc, TRUE, CMNG_FNS_MINMAX);
|
|
// XXX bxe_link_sync_notify(sc);
|
|
}
|
|
|
|
storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
|
|
}
|
|
|
|
static void
|
|
bxe_set_mf_bw(struct bxe_softc *sc)
|
|
{
|
|
bxe_config_mf_bw(sc);
|
|
bxe_fw_command(sc, DRV_MSG_CODE_SET_MF_BW_ACK, 0);
|
|
}
|
|
|
|
static void
|
|
bxe_handle_eee_event(struct bxe_softc *sc)
|
|
{
|
|
BLOGD(sc, DBG_INTR, "EEE - LLDP event\n");
|
|
bxe_fw_command(sc, DRV_MSG_CODE_EEE_RESULTS_ACK, 0);
|
|
}
|
|
|
|
#define DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED 3
|
|
|
|
static void
|
|
bxe_drv_info_ether_stat(struct bxe_softc *sc)
|
|
{
|
|
struct eth_stats_info *ether_stat =
|
|
&sc->sp->drv_info_to_mcp.ether_stat;
|
|
|
|
strlcpy(ether_stat->version, BXE_DRIVER_VERSION,
|
|
ETH_STAT_INFO_VERSION_LEN);
|
|
|
|
/* XXX (+ MAC_PAD) taken from other driver... verify this is right */
|
|
sc->sp_objs[0].mac_obj.get_n_elements(sc, &sc->sp_objs[0].mac_obj,
|
|
DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED,
|
|
ether_stat->mac_local + MAC_PAD,
|
|
MAC_PAD, ETH_ALEN);
|
|
|
|
ether_stat->mtu_size = sc->mtu;
|
|
|
|
ether_stat->feature_flags |= FEATURE_ETH_CHKSUM_OFFLOAD_MASK;
|
|
if (if_getcapenable(sc->ifp) & (IFCAP_TSO4 | IFCAP_TSO6)) {
|
|
ether_stat->feature_flags |= FEATURE_ETH_LSO_MASK;
|
|
}
|
|
|
|
// XXX ether_stat->feature_flags |= ???;
|
|
|
|
ether_stat->promiscuous_mode = 0; // (flags & PROMISC) ? 1 : 0;
|
|
|
|
ether_stat->txq_size = sc->tx_ring_size;
|
|
ether_stat->rxq_size = sc->rx_ring_size;
|
|
}
|
|
|
|
static void
|
|
bxe_handle_drv_info_req(struct bxe_softc *sc)
|
|
{
|
|
enum drv_info_opcode op_code;
|
|
uint32_t drv_info_ctl = SHMEM2_RD(sc, drv_info_control);
|
|
|
|
/* if drv_info version supported by MFW doesn't match - send NACK */
|
|
if ((drv_info_ctl & DRV_INFO_CONTROL_VER_MASK) != DRV_INFO_CUR_VER) {
|
|
bxe_fw_command(sc, DRV_MSG_CODE_DRV_INFO_NACK, 0);
|
|
return;
|
|
}
|
|
|
|
op_code = ((drv_info_ctl & DRV_INFO_CONTROL_OP_CODE_MASK) >>
|
|
DRV_INFO_CONTROL_OP_CODE_SHIFT);
|
|
|
|
memset(&sc->sp->drv_info_to_mcp, 0, sizeof(union drv_info_to_mcp));
|
|
|
|
switch (op_code) {
|
|
case ETH_STATS_OPCODE:
|
|
bxe_drv_info_ether_stat(sc);
|
|
break;
|
|
case FCOE_STATS_OPCODE:
|
|
case ISCSI_STATS_OPCODE:
|
|
default:
|
|
/* if op code isn't supported - send NACK */
|
|
bxe_fw_command(sc, DRV_MSG_CODE_DRV_INFO_NACK, 0);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If we got drv_info attn from MFW then these fields are defined in
|
|
* shmem2 for sure
|
|
*/
|
|
SHMEM2_WR(sc, drv_info_host_addr_lo,
|
|
U64_LO(BXE_SP_MAPPING(sc, drv_info_to_mcp)));
|
|
SHMEM2_WR(sc, drv_info_host_addr_hi,
|
|
U64_HI(BXE_SP_MAPPING(sc, drv_info_to_mcp)));
|
|
|
|
bxe_fw_command(sc, DRV_MSG_CODE_DRV_INFO_ACK, 0);
|
|
}
|
|
|
|
static void
|
|
bxe_dcc_event(struct bxe_softc *sc,
|
|
uint32_t dcc_event)
|
|
{
|
|
BLOGD(sc, DBG_INTR, "dcc_event 0x%08x\n", dcc_event);
|
|
|
|
if (dcc_event & DRV_STATUS_DCC_DISABLE_ENABLE_PF) {
|
|
/*
|
|
* This is the only place besides the function initialization
|
|
* where the sc->flags can change so it is done without any
|
|
* locks
|
|
*/
|
|
if (sc->devinfo.mf_info.mf_config[SC_VN(sc)] & FUNC_MF_CFG_FUNC_DISABLED) {
|
|
BLOGD(sc, DBG_INTR, "mf_cfg function disabled\n");
|
|
sc->flags |= BXE_MF_FUNC_DIS;
|
|
bxe_e1h_disable(sc);
|
|
} else {
|
|
BLOGD(sc, DBG_INTR, "mf_cfg function enabled\n");
|
|
sc->flags &= ~BXE_MF_FUNC_DIS;
|
|
bxe_e1h_enable(sc);
|
|
}
|
|
dcc_event &= ~DRV_STATUS_DCC_DISABLE_ENABLE_PF;
|
|
}
|
|
|
|
if (dcc_event & DRV_STATUS_DCC_BANDWIDTH_ALLOCATION) {
|
|
bxe_config_mf_bw(sc);
|
|
dcc_event &= ~DRV_STATUS_DCC_BANDWIDTH_ALLOCATION;
|
|
}
|
|
|
|
/* Report results to MCP */
|
|
if (dcc_event)
|
|
bxe_fw_command(sc, DRV_MSG_CODE_DCC_FAILURE, 0);
|
|
else
|
|
bxe_fw_command(sc, DRV_MSG_CODE_DCC_OK, 0);
|
|
}
|
|
|
|
static void
|
|
bxe_pmf_update(struct bxe_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t val;
|
|
|
|
sc->port.pmf = 1;
|
|
BLOGD(sc, DBG_INTR, "pmf %d\n", sc->port.pmf);
|
|
|
|
/*
|
|
* We need the mb() to ensure the ordering between the writing to
|
|
* sc->port.pmf here and reading it from the bxe_periodic_task().
|
|
*/
|
|
mb();
|
|
|
|
/* queue a periodic task */
|
|
// XXX schedule task...
|
|
|
|
// XXX bxe_dcbx_pmf_update(sc);
|
|
|
|
/* enable nig attention */
|
|
val = (0xff0f | (1 << (SC_VN(sc) + 4)));
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port*8, val);
|
|
REG_WR(sc, HC_REG_LEADING_EDGE_0 + port*8, val);
|
|
} else if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, val);
|
|
REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, val);
|
|
}
|
|
|
|
bxe_stats_handle(sc, STATS_EVENT_PMF);
|
|
}
|
|
|
|
static int
|
|
bxe_mc_assert(struct bxe_softc *sc)
|
|
{
|
|
char last_idx;
|
|
int i, rc = 0;
|
|
uint32_t row0, row1, row2, row3;
|
|
|
|
/* XSTORM */
|
|
last_idx = REG_RD8(sc, BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_INDEX_OFFSET);
|
|
if (last_idx)
|
|
BLOGE(sc, "XSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx);
|
|
|
|
/* print the asserts */
|
|
for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
|
|
|
|
row0 = REG_RD(sc, BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i));
|
|
row1 = REG_RD(sc, BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) + 4);
|
|
row2 = REG_RD(sc, BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) + 8);
|
|
row3 = REG_RD(sc, BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) + 12);
|
|
|
|
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
|
|
BLOGE(sc, "XSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n",
|
|
i, row3, row2, row1, row0);
|
|
rc++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* TSTORM */
|
|
last_idx = REG_RD8(sc, BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_INDEX_OFFSET);
|
|
if (last_idx) {
|
|
BLOGE(sc, "TSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx);
|
|
}
|
|
|
|
/* print the asserts */
|
|
for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
|
|
|
|
row0 = REG_RD(sc, BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i));
|
|
row1 = REG_RD(sc, BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) + 4);
|
|
row2 = REG_RD(sc, BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) + 8);
|
|
row3 = REG_RD(sc, BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) + 12);
|
|
|
|
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
|
|
BLOGE(sc, "TSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n",
|
|
i, row3, row2, row1, row0);
|
|
rc++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* CSTORM */
|
|
last_idx = REG_RD8(sc, BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_INDEX_OFFSET);
|
|
if (last_idx) {
|
|
BLOGE(sc, "CSTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx);
|
|
}
|
|
|
|
/* print the asserts */
|
|
for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
|
|
|
|
row0 = REG_RD(sc, BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i));
|
|
row1 = REG_RD(sc, BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) + 4);
|
|
row2 = REG_RD(sc, BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) + 8);
|
|
row3 = REG_RD(sc, BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) + 12);
|
|
|
|
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
|
|
BLOGE(sc, "CSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n",
|
|
i, row3, row2, row1, row0);
|
|
rc++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* USTORM */
|
|
last_idx = REG_RD8(sc, BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_INDEX_OFFSET);
|
|
if (last_idx) {
|
|
BLOGE(sc, "USTORM_ASSERT_LIST_INDEX 0x%x\n", last_idx);
|
|
}
|
|
|
|
/* print the asserts */
|
|
for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
|
|
|
|
row0 = REG_RD(sc, BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i));
|
|
row1 = REG_RD(sc, BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) + 4);
|
|
row2 = REG_RD(sc, BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) + 8);
|
|
row3 = REG_RD(sc, BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) + 12);
|
|
|
|
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
|
|
BLOGE(sc, "USTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x\n",
|
|
i, row3, row2, row1, row0);
|
|
rc++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static void
|
|
bxe_attn_int_deasserted3(struct bxe_softc *sc,
|
|
uint32_t attn)
|
|
{
|
|
int func = SC_FUNC(sc);
|
|
uint32_t val;
|
|
|
|
if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) {
|
|
|
|
if (attn & BXE_PMF_LINK_ASSERT(sc)) {
|
|
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
|
|
bxe_read_mf_cfg(sc);
|
|
sc->devinfo.mf_info.mf_config[SC_VN(sc)] =
|
|
MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].config);
|
|
val = SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_status);
|
|
|
|
if (val & DRV_STATUS_DCC_EVENT_MASK)
|
|
bxe_dcc_event(sc, (val & DRV_STATUS_DCC_EVENT_MASK));
|
|
|
|
if (val & DRV_STATUS_SET_MF_BW)
|
|
bxe_set_mf_bw(sc);
|
|
|
|
if (val & DRV_STATUS_DRV_INFO_REQ)
|
|
bxe_handle_drv_info_req(sc);
|
|
|
|
#if 0
|
|
if (val & DRV_STATUS_VF_DISABLED)
|
|
bxe_vf_handle_flr_event(sc);
|
|
#endif
|
|
|
|
if ((sc->port.pmf == 0) && (val & DRV_STATUS_PMF))
|
|
bxe_pmf_update(sc);
|
|
|
|
#if 0
|
|
if (sc->port.pmf &&
|
|
(val & DRV_STATUS_DCBX_NEGOTIATION_RESULTS) &&
|
|
(sc->dcbx_enabled > 0))
|
|
/* start dcbx state machine */
|
|
bxe_dcbx_set_params(sc, BXE_DCBX_STATE_NEG_RECEIVED);
|
|
#endif
|
|
|
|
#if 0
|
|
if (val & DRV_STATUS_AFEX_EVENT_MASK)
|
|
bxe_handle_afex_cmd(sc, val & DRV_STATUS_AFEX_EVENT_MASK);
|
|
#endif
|
|
|
|
if (val & DRV_STATUS_EEE_NEGOTIATION_RESULTS)
|
|
bxe_handle_eee_event(sc);
|
|
|
|
if (sc->link_vars.periodic_flags &
|
|
ELINK_PERIODIC_FLAGS_LINK_EVENT) {
|
|
/* sync with link */
|
|
BXE_PHY_LOCK(sc);
|
|
sc->link_vars.periodic_flags &=
|
|
~ELINK_PERIODIC_FLAGS_LINK_EVENT;
|
|
BXE_PHY_UNLOCK(sc);
|
|
if (IS_MF(sc))
|
|
; // XXX bxe_link_sync_notify(sc);
|
|
bxe_link_report(sc);
|
|
}
|
|
|
|
/*
|
|
* Always call it here: bxe_link_report() will
|
|
* prevent the link indication duplication.
|
|
*/
|
|
bxe_link_status_update(sc);
|
|
|
|
} else if (attn & BXE_MC_ASSERT_BITS) {
|
|
|
|
BLOGE(sc, "MC assert!\n");
|
|
bxe_mc_assert(sc);
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_10, 0);
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_9, 0);
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_8, 0);
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_7, 0);
|
|
bxe_panic(sc, ("MC assert!\n"));
|
|
|
|
} else if (attn & BXE_MCP_ASSERT) {
|
|
|
|
BLOGE(sc, "MCP assert!\n");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_11, 0);
|
|
// XXX bxe_fw_dump(sc);
|
|
|
|
} else {
|
|
BLOGE(sc, "Unknown HW assert! (attn 0x%08x)\n", attn);
|
|
}
|
|
}
|
|
|
|
if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) {
|
|
BLOGE(sc, "LATCHED attention 0x%08x (masked)\n", attn);
|
|
if (attn & BXE_GRC_TIMEOUT) {
|
|
val = CHIP_IS_E1(sc) ? 0 : REG_RD(sc, MISC_REG_GRC_TIMEOUT_ATTN);
|
|
BLOGE(sc, "GRC time-out 0x%08x\n", val);
|
|
}
|
|
if (attn & BXE_GRC_RSV) {
|
|
val = CHIP_IS_E1(sc) ? 0 : REG_RD(sc, MISC_REG_GRC_RSV_ATTN);
|
|
BLOGE(sc, "GRC reserved 0x%08x\n", val);
|
|
}
|
|
REG_WR(sc, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_attn_int_deasserted2(struct bxe_softc *sc,
|
|
uint32_t attn)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int reg_offset;
|
|
uint32_t val0, mask0, val1, mask1;
|
|
uint32_t val;
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
|
|
val = REG_RD(sc, CFC_REG_CFC_INT_STS_CLR);
|
|
BLOGE(sc, "CFC hw attention 0x%08x\n", val);
|
|
/* CFC error attention */
|
|
if (val & 0x2) {
|
|
BLOGE(sc, "FATAL error from CFC\n");
|
|
}
|
|
}
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
|
|
val = REG_RD(sc, PXP_REG_PXP_INT_STS_CLR_0);
|
|
BLOGE(sc, "PXP hw attention-0 0x%08x\n", val);
|
|
/* RQ_USDMDP_FIFO_OVERFLOW */
|
|
if (val & 0x18000) {
|
|
BLOGE(sc, "FATAL error from PXP\n");
|
|
}
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
val = REG_RD(sc, PXP_REG_PXP_INT_STS_CLR_1);
|
|
BLOGE(sc, "PXP hw attention-1 0x%08x\n", val);
|
|
}
|
|
}
|
|
|
|
#define PXP2_EOP_ERROR_BIT PXP2_PXP2_INT_STS_CLR_0_REG_WR_PGLUE_EOP_ERROR
|
|
#define AEU_PXP2_HW_INT_BIT AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT
|
|
|
|
if (attn & AEU_PXP2_HW_INT_BIT) {
|
|
/* CQ47854 workaround do not panic on
|
|
* PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR
|
|
*/
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
mask0 = REG_RD(sc, PXP2_REG_PXP2_INT_MASK_0);
|
|
val1 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_1);
|
|
mask1 = REG_RD(sc, PXP2_REG_PXP2_INT_MASK_1);
|
|
val0 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_0);
|
|
/*
|
|
* If the olny PXP2_EOP_ERROR_BIT is set in
|
|
* STS0 and STS1 - clear it
|
|
*
|
|
* probably we lose additional attentions between
|
|
* STS0 and STS_CLR0, in this case user will not
|
|
* be notified about them
|
|
*/
|
|
if (val0 & mask0 & PXP2_EOP_ERROR_BIT &&
|
|
!(val1 & mask1))
|
|
val0 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_CLR_0);
|
|
|
|
/* print the register, since no one can restore it */
|
|
BLOGE(sc, "PXP2_REG_PXP2_INT_STS_CLR_0 0x%08x\n", val0);
|
|
|
|
/*
|
|
* if PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR
|
|
* then notify
|
|
*/
|
|
if (val0 & PXP2_EOP_ERROR_BIT) {
|
|
BLOGE(sc, "PXP2_WR_PGLUE_EOP_ERROR\n");
|
|
|
|
/*
|
|
* if only PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR is
|
|
* set then clear attention from PXP2 block without panic
|
|
*/
|
|
if (((val0 & mask0) == PXP2_EOP_ERROR_BIT) &&
|
|
((val1 & mask1) == 0))
|
|
attn &= ~AEU_PXP2_HW_INT_BIT;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (attn & HW_INTERRUT_ASSERT_SET_2) {
|
|
reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2);
|
|
|
|
val = REG_RD(sc, reg_offset);
|
|
val &= ~(attn & HW_INTERRUT_ASSERT_SET_2);
|
|
REG_WR(sc, reg_offset, val);
|
|
|
|
BLOGE(sc, "FATAL HW block attention set2 0x%x\n",
|
|
(uint32_t)(attn & HW_INTERRUT_ASSERT_SET_2));
|
|
bxe_panic(sc, ("HW block attention set2\n"));
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_attn_int_deasserted1(struct bxe_softc *sc,
|
|
uint32_t attn)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int reg_offset;
|
|
uint32_t val;
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) {
|
|
val = REG_RD(sc, DORQ_REG_DORQ_INT_STS_CLR);
|
|
BLOGE(sc, "DB hw attention 0x%08x\n", val);
|
|
/* DORQ discard attention */
|
|
if (val & 0x2) {
|
|
BLOGE(sc, "FATAL error from DORQ\n");
|
|
}
|
|
}
|
|
|
|
if (attn & HW_INTERRUT_ASSERT_SET_1) {
|
|
reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1);
|
|
|
|
val = REG_RD(sc, reg_offset);
|
|
val &= ~(attn & HW_INTERRUT_ASSERT_SET_1);
|
|
REG_WR(sc, reg_offset, val);
|
|
|
|
BLOGE(sc, "FATAL HW block attention set1 0x%08x\n",
|
|
(uint32_t)(attn & HW_INTERRUT_ASSERT_SET_1));
|
|
bxe_panic(sc, ("HW block attention set1\n"));
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_attn_int_deasserted0(struct bxe_softc *sc,
|
|
uint32_t attn)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int reg_offset;
|
|
uint32_t val;
|
|
|
|
reg_offset = (port) ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) {
|
|
val = REG_RD(sc, reg_offset);
|
|
val &= ~AEU_INPUTS_ATTN_BITS_SPIO5;
|
|
REG_WR(sc, reg_offset, val);
|
|
|
|
BLOGW(sc, "SPIO5 hw attention\n");
|
|
|
|
/* Fan failure attention */
|
|
elink_hw_reset_phy(&sc->link_params);
|
|
bxe_fan_failure(sc);
|
|
}
|
|
|
|
if ((attn & sc->link_vars.aeu_int_mask) && sc->port.pmf) {
|
|
BXE_PHY_LOCK(sc);
|
|
elink_handle_module_detect_int(&sc->link_params);
|
|
BXE_PHY_UNLOCK(sc);
|
|
}
|
|
|
|
if (attn & HW_INTERRUT_ASSERT_SET_0) {
|
|
val = REG_RD(sc, reg_offset);
|
|
val &= ~(attn & HW_INTERRUT_ASSERT_SET_0);
|
|
REG_WR(sc, reg_offset, val);
|
|
|
|
bxe_panic(sc, ("FATAL HW block attention set0 0x%lx\n",
|
|
(attn & HW_INTERRUT_ASSERT_SET_0)));
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_attn_int_deasserted(struct bxe_softc *sc,
|
|
uint32_t deasserted)
|
|
{
|
|
struct attn_route attn;
|
|
struct attn_route *group_mask;
|
|
int port = SC_PORT(sc);
|
|
int index;
|
|
uint32_t reg_addr;
|
|
uint32_t val;
|
|
uint32_t aeu_mask;
|
|
uint8_t global = FALSE;
|
|
|
|
/*
|
|
* Need to take HW lock because MCP or other port might also
|
|
* try to handle this event.
|
|
*/
|
|
bxe_acquire_alr(sc);
|
|
|
|
if (bxe_chk_parity_attn(sc, &global, TRUE)) {
|
|
/* XXX
|
|
* In case of parity errors don't handle attentions so that
|
|
* other function would "see" parity errors.
|
|
*/
|
|
sc->recovery_state = BXE_RECOVERY_INIT;
|
|
// XXX schedule a recovery task...
|
|
/* disable HW interrupts */
|
|
bxe_int_disable(sc);
|
|
bxe_release_alr(sc);
|
|
return;
|
|
}
|
|
|
|
attn.sig[0] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port*4);
|
|
attn.sig[1] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port*4);
|
|
attn.sig[2] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port*4);
|
|
attn.sig[3] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port*4);
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
attn.sig[4] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port*4);
|
|
} else {
|
|
attn.sig[4] = 0;
|
|
}
|
|
|
|
BLOGD(sc, DBG_INTR, "attn: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n",
|
|
attn.sig[0], attn.sig[1], attn.sig[2], attn.sig[3], attn.sig[4]);
|
|
|
|
for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
|
|
if (deasserted & (1 << index)) {
|
|
group_mask = &sc->attn_group[index];
|
|
|
|
BLOGD(sc, DBG_INTR,
|
|
"group[%d]: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", index,
|
|
group_mask->sig[0], group_mask->sig[1],
|
|
group_mask->sig[2], group_mask->sig[3],
|
|
group_mask->sig[4]);
|
|
|
|
bxe_attn_int_deasserted4(sc, attn.sig[4] & group_mask->sig[4]);
|
|
bxe_attn_int_deasserted3(sc, attn.sig[3] & group_mask->sig[3]);
|
|
bxe_attn_int_deasserted1(sc, attn.sig[1] & group_mask->sig[1]);
|
|
bxe_attn_int_deasserted2(sc, attn.sig[2] & group_mask->sig[2]);
|
|
bxe_attn_int_deasserted0(sc, attn.sig[0] & group_mask->sig[0]);
|
|
}
|
|
}
|
|
|
|
bxe_release_alr(sc);
|
|
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
reg_addr = (HC_REG_COMMAND_REG + port*32 +
|
|
COMMAND_REG_ATTN_BITS_CLR);
|
|
} else {
|
|
reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_CLR_UPPER*8);
|
|
}
|
|
|
|
val = ~deasserted;
|
|
BLOGD(sc, DBG_INTR,
|
|
"about to mask 0x%08x at %s addr 0x%08x\n", val,
|
|
(sc->devinfo.int_block == INT_BLOCK_HC) ? "HC" : "IGU", reg_addr);
|
|
REG_WR(sc, reg_addr, val);
|
|
|
|
if (~sc->attn_state & deasserted) {
|
|
BLOGE(sc, "IGU error\n");
|
|
}
|
|
|
|
reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
|
|
MISC_REG_AEU_MASK_ATTN_FUNC_0;
|
|
|
|
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
|
|
|
|
aeu_mask = REG_RD(sc, reg_addr);
|
|
|
|
BLOGD(sc, DBG_INTR, "aeu_mask 0x%08x newly deasserted 0x%08x\n",
|
|
aeu_mask, deasserted);
|
|
aeu_mask |= (deasserted & 0x3ff);
|
|
BLOGD(sc, DBG_INTR, "new mask 0x%08x\n", aeu_mask);
|
|
|
|
REG_WR(sc, reg_addr, aeu_mask);
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
|
|
|
|
BLOGD(sc, DBG_INTR, "attn_state 0x%08x\n", sc->attn_state);
|
|
sc->attn_state &= ~deasserted;
|
|
BLOGD(sc, DBG_INTR, "new state 0x%08x\n", sc->attn_state);
|
|
}
|
|
|
|
static void
|
|
bxe_attn_int(struct bxe_softc *sc)
|
|
{
|
|
/* read local copy of bits */
|
|
uint32_t attn_bits = le32toh(sc->def_sb->atten_status_block.attn_bits);
|
|
uint32_t attn_ack = le32toh(sc->def_sb->atten_status_block.attn_bits_ack);
|
|
uint32_t attn_state = sc->attn_state;
|
|
|
|
/* look for changed bits */
|
|
uint32_t asserted = attn_bits & ~attn_ack & ~attn_state;
|
|
uint32_t deasserted = ~attn_bits & attn_ack & attn_state;
|
|
|
|
BLOGD(sc, DBG_INTR,
|
|
"attn_bits 0x%08x attn_ack 0x%08x asserted 0x%08x deasserted 0x%08x\n",
|
|
attn_bits, attn_ack, asserted, deasserted);
|
|
|
|
if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state)) {
|
|
BLOGE(sc, "BAD attention state\n");
|
|
}
|
|
|
|
/* handle bits that were raised */
|
|
if (asserted) {
|
|
bxe_attn_int_asserted(sc, asserted);
|
|
}
|
|
|
|
if (deasserted) {
|
|
bxe_attn_int_deasserted(sc, deasserted);
|
|
}
|
|
}
|
|
|
|
static uint16_t
|
|
bxe_update_dsb_idx(struct bxe_softc *sc)
|
|
{
|
|
struct host_sp_status_block *def_sb = sc->def_sb;
|
|
uint16_t rc = 0;
|
|
|
|
mb(); /* status block is written to by the chip */
|
|
|
|
if (sc->def_att_idx != def_sb->atten_status_block.attn_bits_index) {
|
|
sc->def_att_idx = def_sb->atten_status_block.attn_bits_index;
|
|
rc |= BXE_DEF_SB_ATT_IDX;
|
|
}
|
|
|
|
if (sc->def_idx != def_sb->sp_sb.running_index) {
|
|
sc->def_idx = def_sb->sp_sb.running_index;
|
|
rc |= BXE_DEF_SB_IDX;
|
|
}
|
|
|
|
mb();
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static inline struct ecore_queue_sp_obj *
|
|
bxe_cid_to_q_obj(struct bxe_softc *sc,
|
|
uint32_t cid)
|
|
{
|
|
BLOGD(sc, DBG_SP, "retrieving fp from cid %d\n", cid);
|
|
return (&sc->sp_objs[CID_TO_FP(cid, sc)].q_obj);
|
|
}
|
|
|
|
static void
|
|
bxe_handle_mcast_eqe(struct bxe_softc *sc)
|
|
{
|
|
struct ecore_mcast_ramrod_params rparam;
|
|
int rc;
|
|
|
|
memset(&rparam, 0, sizeof(rparam));
|
|
|
|
rparam.mcast_obj = &sc->mcast_obj;
|
|
|
|
BXE_MCAST_LOCK(sc);
|
|
|
|
/* clear pending state for the last command */
|
|
sc->mcast_obj.raw.clear_pending(&sc->mcast_obj.raw);
|
|
|
|
/* if there are pending mcast commands - send them */
|
|
if (sc->mcast_obj.check_pending(&sc->mcast_obj)) {
|
|
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
|
|
if (rc < 0) {
|
|
BLOGD(sc, DBG_SP,
|
|
"ERROR: Failed to send pending mcast commands (%d)\n",
|
|
rc);
|
|
}
|
|
}
|
|
|
|
BXE_MCAST_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
bxe_handle_classification_eqe(struct bxe_softc *sc,
|
|
union event_ring_elem *elem)
|
|
{
|
|
unsigned long ramrod_flags = 0;
|
|
int rc = 0;
|
|
uint32_t cid = elem->message.data.eth_event.echo & BXE_SWCID_MASK;
|
|
struct ecore_vlan_mac_obj *vlan_mac_obj;
|
|
|
|
/* always push next commands out, don't wait here */
|
|
bit_set(&ramrod_flags, RAMROD_CONT);
|
|
|
|
switch (le32toh(elem->message.data.eth_event.echo) >> BXE_SWCID_SHIFT) {
|
|
case ECORE_FILTER_MAC_PENDING:
|
|
BLOGD(sc, DBG_SP, "Got SETUP_MAC completions\n");
|
|
vlan_mac_obj = &sc->sp_objs[cid].mac_obj;
|
|
break;
|
|
|
|
case ECORE_FILTER_MCAST_PENDING:
|
|
BLOGD(sc, DBG_SP, "Got SETUP_MCAST completions\n");
|
|
/*
|
|
* This is only relevant for 57710 where multicast MACs are
|
|
* configured as unicast MACs using the same ramrod.
|
|
*/
|
|
bxe_handle_mcast_eqe(sc);
|
|
return;
|
|
|
|
default:
|
|
BLOGE(sc, "Unsupported classification command: %d\n",
|
|
elem->message.data.eth_event.echo);
|
|
return;
|
|
}
|
|
|
|
rc = vlan_mac_obj->complete(sc, vlan_mac_obj, elem, &ramrod_flags);
|
|
|
|
if (rc < 0) {
|
|
BLOGE(sc, "Failed to schedule new commands (%d)\n", rc);
|
|
} else if (rc > 0) {
|
|
BLOGD(sc, DBG_SP, "Scheduled next pending commands...\n");
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_handle_rx_mode_eqe(struct bxe_softc *sc,
|
|
union event_ring_elem *elem)
|
|
{
|
|
bxe_clear_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);
|
|
|
|
/* send rx_mode command again if was requested */
|
|
if (bxe_test_and_clear_bit(ECORE_FILTER_RX_MODE_SCHED,
|
|
&sc->sp_state)) {
|
|
bxe_set_storm_rx_mode(sc);
|
|
}
|
|
#if 0
|
|
else if (bxe_test_and_clear_bit(ECORE_FILTER_ISCSI_ETH_START_SCHED,
|
|
&sc->sp_state)) {
|
|
bxe_set_iscsi_eth_rx_mode(sc, TRUE);
|
|
}
|
|
else if (bxe_test_and_clear_bit(ECORE_FILTER_ISCSI_ETH_STOP_SCHED,
|
|
&sc->sp_state)) {
|
|
bxe_set_iscsi_eth_rx_mode(sc, FALSE);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static void
|
|
bxe_update_eq_prod(struct bxe_softc *sc,
|
|
uint16_t prod)
|
|
{
|
|
storm_memset_eq_prod(sc, prod, SC_FUNC(sc));
|
|
wmb(); /* keep prod updates ordered */
|
|
}
|
|
|
|
static void
|
|
bxe_eq_int(struct bxe_softc *sc)
|
|
{
|
|
uint16_t hw_cons, sw_cons, sw_prod;
|
|
union event_ring_elem *elem;
|
|
uint8_t echo;
|
|
uint32_t cid;
|
|
uint8_t opcode;
|
|
int spqe_cnt = 0;
|
|
struct ecore_queue_sp_obj *q_obj;
|
|
struct ecore_func_sp_obj *f_obj = &sc->func_obj;
|
|
struct ecore_raw_obj *rss_raw = &sc->rss_conf_obj.raw;
|
|
|
|
hw_cons = le16toh(*sc->eq_cons_sb);
|
|
|
|
/*
|
|
* The hw_cons range is 1-255, 257 - the sw_cons range is 0-254, 256.
|
|
* when we get to the next-page we need to adjust so the loop
|
|
* condition below will be met. The next element is the size of a
|
|
* regular element and hence incrementing by 1
|
|
*/
|
|
if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE) {
|
|
hw_cons++;
|
|
}
|
|
|
|
/*
|
|
* This function may never run in parallel with itself for a
|
|
* specific sc and no need for a read memory barrier here.
|
|
*/
|
|
sw_cons = sc->eq_cons;
|
|
sw_prod = sc->eq_prod;
|
|
|
|
BLOGD(sc, DBG_SP,"EQ: hw_cons=%u sw_cons=%u eq_spq_left=0x%lx\n",
|
|
hw_cons, sw_cons, atomic_load_acq_long(&sc->eq_spq_left));
|
|
|
|
for (;
|
|
sw_cons != hw_cons;
|
|
sw_prod = NEXT_EQ_IDX(sw_prod), sw_cons = NEXT_EQ_IDX(sw_cons)) {
|
|
|
|
elem = &sc->eq[EQ_DESC(sw_cons)];
|
|
|
|
#if 0
|
|
int rc;
|
|
rc = bxe_iov_eq_sp_event(sc, elem);
|
|
if (!rc) {
|
|
BLOGE(sc, "bxe_iov_eq_sp_event returned %d\n", rc);
|
|
goto next_spqe;
|
|
}
|
|
#endif
|
|
|
|
/* elem CID originates from FW, actually LE */
|
|
cid = SW_CID(elem->message.data.cfc_del_event.cid);
|
|
opcode = elem->message.opcode;
|
|
|
|
/* handle eq element */
|
|
switch (opcode) {
|
|
#if 0
|
|
case EVENT_RING_OPCODE_VF_PF_CHANNEL:
|
|
BLOGD(sc, DBG_SP, "vf/pf channel element on eq\n");
|
|
bxe_vf_mbx(sc, &elem->message.data.vf_pf_event);
|
|
continue;
|
|
#endif
|
|
|
|
case EVENT_RING_OPCODE_STAT_QUERY:
|
|
BLOGD(sc, DBG_SP, "got statistics completion event %d\n",
|
|
sc->stats_comp++);
|
|
/* nothing to do with stats comp */
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_CFC_DEL:
|
|
/* handle according to cid range */
|
|
/* we may want to verify here that the sc state is HALTING */
|
|
BLOGD(sc, DBG_SP, "got delete ramrod for MULTI[%d]\n", cid);
|
|
q_obj = bxe_cid_to_q_obj(sc, cid);
|
|
if (q_obj->complete_cmd(sc, q_obj, ECORE_Q_CMD_CFC_DEL)) {
|
|
break;
|
|
}
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_STOP_TRAFFIC:
|
|
BLOGD(sc, DBG_SP, "got STOP TRAFFIC\n");
|
|
if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_TX_STOP)) {
|
|
break;
|
|
}
|
|
// XXX bxe_dcbx_set_params(sc, BXE_DCBX_STATE_TX_PAUSED);
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_START_TRAFFIC:
|
|
BLOGD(sc, DBG_SP, "got START TRAFFIC\n");
|
|
if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_TX_START)) {
|
|
break;
|
|
}
|
|
// XXX bxe_dcbx_set_params(sc, BXE_DCBX_STATE_TX_RELEASED);
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_FUNCTION_UPDATE:
|
|
echo = elem->message.data.function_update_event.echo;
|
|
if (echo == SWITCH_UPDATE) {
|
|
BLOGD(sc, DBG_SP, "got FUNC_SWITCH_UPDATE ramrod\n");
|
|
if (f_obj->complete_cmd(sc, f_obj,
|
|
ECORE_F_CMD_SWITCH_UPDATE)) {
|
|
break;
|
|
}
|
|
}
|
|
else {
|
|
BLOGD(sc, DBG_SP,
|
|
"AFEX: ramrod completed FUNCTION_UPDATE\n");
|
|
#if 0
|
|
f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_AFEX_UPDATE);
|
|
/*
|
|
* We will perform the queues update from the sp_core_task as
|
|
* all queue SP operations should run with CORE_LOCK.
|
|
*/
|
|
bxe_set_bit(BXE_SP_CORE_AFEX_F_UPDATE, &sc->sp_core_state);
|
|
taskqueue_enqueue(sc->sp_tq, &sc->sp_tq_task);
|
|
#endif
|
|
}
|
|
goto next_spqe;
|
|
|
|
#if 0
|
|
case EVENT_RING_OPCODE_AFEX_VIF_LISTS:
|
|
f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_AFEX_VIFLISTS);
|
|
bxe_after_afex_vif_lists(sc, elem);
|
|
goto next_spqe;
|
|
#endif
|
|
|
|
case EVENT_RING_OPCODE_FORWARD_SETUP:
|
|
q_obj = &bxe_fwd_sp_obj(sc, q_obj);
|
|
if (q_obj->complete_cmd(sc, q_obj,
|
|
ECORE_Q_CMD_SETUP_TX_ONLY)) {
|
|
break;
|
|
}
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_FUNCTION_START:
|
|
BLOGD(sc, DBG_SP, "got FUNC_START ramrod\n");
|
|
if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_START)) {
|
|
break;
|
|
}
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_FUNCTION_STOP:
|
|
BLOGD(sc, DBG_SP, "got FUNC_STOP ramrod\n");
|
|
if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_STOP)) {
|
|
break;
|
|
}
|
|
goto next_spqe;
|
|
}
|
|
|
|
switch (opcode | sc->state) {
|
|
case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | BXE_STATE_OPEN):
|
|
case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | BXE_STATE_OPENING_WAITING_PORT):
|
|
cid = elem->message.data.eth_event.echo & BXE_SWCID_MASK;
|
|
BLOGD(sc, DBG_SP, "got RSS_UPDATE ramrod. CID %d\n", cid);
|
|
rss_raw->clear_pending(rss_raw);
|
|
break;
|
|
|
|
case (EVENT_RING_OPCODE_SET_MAC | BXE_STATE_OPEN):
|
|
case (EVENT_RING_OPCODE_SET_MAC | BXE_STATE_DIAG):
|
|
case (EVENT_RING_OPCODE_SET_MAC | BXE_STATE_CLOSING_WAITING_HALT):
|
|
case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BXE_STATE_OPEN):
|
|
case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BXE_STATE_DIAG):
|
|
case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BXE_STATE_CLOSING_WAITING_HALT):
|
|
BLOGD(sc, DBG_SP, "got (un)set mac ramrod\n");
|
|
bxe_handle_classification_eqe(sc, elem);
|
|
break;
|
|
|
|
case (EVENT_RING_OPCODE_MULTICAST_RULES | BXE_STATE_OPEN):
|
|
case (EVENT_RING_OPCODE_MULTICAST_RULES | BXE_STATE_DIAG):
|
|
case (EVENT_RING_OPCODE_MULTICAST_RULES | BXE_STATE_CLOSING_WAITING_HALT):
|
|
BLOGD(sc, DBG_SP, "got mcast ramrod\n");
|
|
bxe_handle_mcast_eqe(sc);
|
|
break;
|
|
|
|
case (EVENT_RING_OPCODE_FILTERS_RULES | BXE_STATE_OPEN):
|
|
case (EVENT_RING_OPCODE_FILTERS_RULES | BXE_STATE_DIAG):
|
|
case (EVENT_RING_OPCODE_FILTERS_RULES | BXE_STATE_CLOSING_WAITING_HALT):
|
|
BLOGD(sc, DBG_SP, "got rx_mode ramrod\n");
|
|
bxe_handle_rx_mode_eqe(sc, elem);
|
|
break;
|
|
|
|
default:
|
|
/* unknown event log error and continue */
|
|
BLOGE(sc, "Unknown EQ event %d, sc->state 0x%x\n",
|
|
elem->message.opcode, sc->state);
|
|
}
|
|
|
|
next_spqe:
|
|
spqe_cnt++;
|
|
} /* for */
|
|
|
|
mb();
|
|
atomic_add_acq_long(&sc->eq_spq_left, spqe_cnt);
|
|
|
|
sc->eq_cons = sw_cons;
|
|
sc->eq_prod = sw_prod;
|
|
|
|
/* make sure that above mem writes were issued towards the memory */
|
|
wmb();
|
|
|
|
/* update producer */
|
|
bxe_update_eq_prod(sc, sc->eq_prod);
|
|
}
|
|
|
|
static void
|
|
bxe_handle_sp_tq(void *context,
|
|
int pending)
|
|
{
|
|
struct bxe_softc *sc = (struct bxe_softc *)context;
|
|
uint16_t status;
|
|
|
|
BLOGD(sc, DBG_SP, "---> SP TASK <---\n");
|
|
|
|
/* what work needs to be performed? */
|
|
status = bxe_update_dsb_idx(sc);
|
|
|
|
BLOGD(sc, DBG_SP, "dsb status 0x%04x\n", status);
|
|
|
|
/* HW attentions */
|
|
if (status & BXE_DEF_SB_ATT_IDX) {
|
|
BLOGD(sc, DBG_SP, "---> ATTN INTR <---\n");
|
|
bxe_attn_int(sc);
|
|
status &= ~BXE_DEF_SB_ATT_IDX;
|
|
}
|
|
|
|
/* SP events: STAT_QUERY and others */
|
|
if (status & BXE_DEF_SB_IDX) {
|
|
/* handle EQ completions */
|
|
BLOGD(sc, DBG_SP, "---> EQ INTR <---\n");
|
|
bxe_eq_int(sc);
|
|
bxe_ack_sb(sc, sc->igu_dsb_id, USTORM_ID,
|
|
le16toh(sc->def_idx), IGU_INT_NOP, 1);
|
|
status &= ~BXE_DEF_SB_IDX;
|
|
}
|
|
|
|
/* if status is non zero then something went wrong */
|
|
if (__predict_false(status)) {
|
|
BLOGE(sc, "Got an unknown SP interrupt! (0x%04x)\n", status);
|
|
}
|
|
|
|
/* ack status block only if something was actually handled */
|
|
bxe_ack_sb(sc, sc->igu_dsb_id, ATTENTION_ID,
|
|
le16toh(sc->def_att_idx), IGU_INT_ENABLE, 1);
|
|
|
|
/*
|
|
* Must be called after the EQ processing (since eq leads to sriov
|
|
* ramrod completion flows).
|
|
* This flow may have been scheduled by the arrival of a ramrod
|
|
* completion, or by the sriov code rescheduling itself.
|
|
*/
|
|
// XXX bxe_iov_sp_task(sc);
|
|
|
|
#if 0
|
|
/* AFEX - poll to check if VIFSET_ACK should be sent to MFW */
|
|
if (bxe_test_and_clear_bit(ECORE_AFEX_PENDING_VIFSET_MCP_ACK,
|
|
&sc->sp_state)) {
|
|
bxe_link_report(sc);
|
|
bxe_fw_command(sc, DRV_MSG_CODE_AFEX_VIFSET_ACK, 0);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static void
|
|
bxe_handle_fp_tq(void *context,
|
|
int pending)
|
|
{
|
|
struct bxe_fastpath *fp = (struct bxe_fastpath *)context;
|
|
struct bxe_softc *sc = fp->sc;
|
|
uint8_t more_tx = FALSE;
|
|
uint8_t more_rx = FALSE;
|
|
|
|
BLOGD(sc, DBG_INTR, "---> FP TASK QUEUE (%d) <---\n", fp->index);
|
|
|
|
/* XXX
|
|
* IFF_DRV_RUNNING state can't be checked here since we process
|
|
* slowpath events on a client queue during setup. Instead
|
|
* we need to add a "process/continue" flag here that the driver
|
|
* can use to tell the task here not to do anything.
|
|
*/
|
|
#if 0
|
|
if (!(if_getdrvflags(sc->ifp) & IFF_DRV_RUNNING)) {
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/* update the fastpath index */
|
|
bxe_update_fp_sb_idx(fp);
|
|
|
|
/* XXX add loop here if ever support multiple tx CoS */
|
|
/* fp->txdata[cos] */
|
|
if (bxe_has_tx_work(fp)) {
|
|
BXE_FP_TX_LOCK(fp);
|
|
more_tx = bxe_txeof(sc, fp);
|
|
BXE_FP_TX_UNLOCK(fp);
|
|
}
|
|
|
|
if (bxe_has_rx_work(fp)) {
|
|
more_rx = bxe_rxeof(sc, fp);
|
|
}
|
|
|
|
if (more_rx /*|| more_tx*/) {
|
|
/* still more work to do */
|
|
taskqueue_enqueue_fast(fp->tq, &fp->tq_task);
|
|
return;
|
|
}
|
|
|
|
bxe_ack_sb(sc, fp->igu_sb_id, USTORM_ID,
|
|
le16toh(fp->fp_hc_idx), IGU_INT_ENABLE, 1);
|
|
}
|
|
|
|
static void
|
|
bxe_task_fp(struct bxe_fastpath *fp)
|
|
{
|
|
struct bxe_softc *sc = fp->sc;
|
|
uint8_t more_tx = FALSE;
|
|
uint8_t more_rx = FALSE;
|
|
|
|
BLOGD(sc, DBG_INTR, "---> FP TASK ISR (%d) <---\n", fp->index);
|
|
|
|
/* update the fastpath index */
|
|
bxe_update_fp_sb_idx(fp);
|
|
|
|
/* XXX add loop here if ever support multiple tx CoS */
|
|
/* fp->txdata[cos] */
|
|
if (bxe_has_tx_work(fp)) {
|
|
BXE_FP_TX_LOCK(fp);
|
|
more_tx = bxe_txeof(sc, fp);
|
|
BXE_FP_TX_UNLOCK(fp);
|
|
}
|
|
|
|
if (bxe_has_rx_work(fp)) {
|
|
more_rx = bxe_rxeof(sc, fp);
|
|
}
|
|
|
|
if (more_rx /*|| more_tx*/) {
|
|
/* still more work to do, bail out if this ISR and process later */
|
|
taskqueue_enqueue_fast(fp->tq, &fp->tq_task);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Here we write the fastpath index taken before doing any tx or rx work.
|
|
* It is very well possible other hw events occurred up to this point and
|
|
* they were actually processed accordingly above. Since we're going to
|
|
* write an older fastpath index, an interrupt is coming which we might
|
|
* not do any work in.
|
|
*/
|
|
bxe_ack_sb(sc, fp->igu_sb_id, USTORM_ID,
|
|
le16toh(fp->fp_hc_idx), IGU_INT_ENABLE, 1);
|
|
}
|
|
|
|
/*
|
|
* Legacy interrupt entry point.
|
|
*
|
|
* Verifies that the controller generated the interrupt and
|
|
* then calls a separate routine to handle the various
|
|
* interrupt causes: link, RX, and TX.
|
|
*/
|
|
static void
|
|
bxe_intr_legacy(void *xsc)
|
|
{
|
|
struct bxe_softc *sc = (struct bxe_softc *)xsc;
|
|
struct bxe_fastpath *fp;
|
|
uint16_t status, mask;
|
|
int i;
|
|
|
|
BLOGD(sc, DBG_INTR, "---> BXE INTx <---\n");
|
|
|
|
#if 0
|
|
/* Don't handle any interrupts if we're not ready. */
|
|
if (__predict_false(sc->intr_sem != 0)) {
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* 0 for ustorm, 1 for cstorm
|
|
* the bits returned from ack_int() are 0-15
|
|
* bit 0 = attention status block
|
|
* bit 1 = fast path status block
|
|
* a mask of 0x2 or more = tx/rx event
|
|
* a mask of 1 = slow path event
|
|
*/
|
|
|
|
status = bxe_ack_int(sc);
|
|
|
|
/* the interrupt is not for us */
|
|
if (__predict_false(status == 0)) {
|
|
BLOGD(sc, DBG_INTR, "Not our interrupt!\n");
|
|
return;
|
|
}
|
|
|
|
BLOGD(sc, DBG_INTR, "Interrupt status 0x%04x\n", status);
|
|
|
|
FOR_EACH_ETH_QUEUE(sc, i) {
|
|
fp = &sc->fp[i];
|
|
mask = (0x2 << (fp->index + CNIC_SUPPORT(sc)));
|
|
if (status & mask) {
|
|
/* acknowledge and disable further fastpath interrupts */
|
|
bxe_ack_sb(sc, fp->igu_sb_id, USTORM_ID, 0, IGU_INT_DISABLE, 0);
|
|
bxe_task_fp(fp);
|
|
status &= ~mask;
|
|
}
|
|
}
|
|
|
|
#if 0
|
|
if (CNIC_SUPPORT(sc)) {
|
|
mask = 0x2;
|
|
if (status & (mask | 0x1)) {
|
|
...
|
|
status &= ~mask;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
if (__predict_false(status & 0x1)) {
|
|
/* acknowledge and disable further slowpath interrupts */
|
|
bxe_ack_sb(sc, sc->igu_dsb_id, USTORM_ID, 0, IGU_INT_DISABLE, 0);
|
|
|
|
/* schedule slowpath handler */
|
|
taskqueue_enqueue_fast(sc->sp_tq, &sc->sp_tq_task);
|
|
|
|
status &= ~0x1;
|
|
}
|
|
|
|
if (__predict_false(status)) {
|
|
BLOGW(sc, "Unexpected fastpath status (0x%08x)!\n", status);
|
|
}
|
|
}
|
|
|
|
/* slowpath interrupt entry point */
|
|
static void
|
|
bxe_intr_sp(void *xsc)
|
|
{
|
|
struct bxe_softc *sc = (struct bxe_softc *)xsc;
|
|
|
|
BLOGD(sc, (DBG_INTR | DBG_SP), "---> SP INTR <---\n");
|
|
|
|
/* acknowledge and disable further slowpath interrupts */
|
|
bxe_ack_sb(sc, sc->igu_dsb_id, USTORM_ID, 0, IGU_INT_DISABLE, 0);
|
|
|
|
/* schedule slowpath handler */
|
|
taskqueue_enqueue_fast(sc->sp_tq, &sc->sp_tq_task);
|
|
}
|
|
|
|
/* fastpath interrupt entry point */
|
|
static void
|
|
bxe_intr_fp(void *xfp)
|
|
{
|
|
struct bxe_fastpath *fp = (struct bxe_fastpath *)xfp;
|
|
struct bxe_softc *sc = fp->sc;
|
|
|
|
BLOGD(sc, DBG_INTR, "---> FP INTR %d <---\n", fp->index);
|
|
|
|
BLOGD(sc, DBG_INTR,
|
|
"(cpu=%d) MSI-X fp=%d fw_sb=%d igu_sb=%d\n",
|
|
curcpu, fp->index, fp->fw_sb_id, fp->igu_sb_id);
|
|
|
|
#if 0
|
|
/* Don't handle any interrupts if we're not ready. */
|
|
if (__predict_false(sc->intr_sem != 0)) {
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/* acknowledge and disable further fastpath interrupts */
|
|
bxe_ack_sb(sc, fp->igu_sb_id, USTORM_ID, 0, IGU_INT_DISABLE, 0);
|
|
|
|
bxe_task_fp(fp);
|
|
}
|
|
|
|
/* Release all interrupts allocated by the driver. */
|
|
static void
|
|
bxe_interrupt_free(struct bxe_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
switch (sc->interrupt_mode) {
|
|
case INTR_MODE_INTX:
|
|
BLOGD(sc, DBG_LOAD, "Releasing legacy INTx vector\n");
|
|
if (sc->intr[0].resource != NULL) {
|
|
bus_release_resource(sc->dev,
|
|
SYS_RES_IRQ,
|
|
sc->intr[0].rid,
|
|
sc->intr[0].resource);
|
|
}
|
|
break;
|
|
case INTR_MODE_MSI:
|
|
for (i = 0; i < sc->intr_count; i++) {
|
|
BLOGD(sc, DBG_LOAD, "Releasing MSI vector %d\n", i);
|
|
if (sc->intr[i].resource && sc->intr[i].rid) {
|
|
bus_release_resource(sc->dev,
|
|
SYS_RES_IRQ,
|
|
sc->intr[i].rid,
|
|
sc->intr[i].resource);
|
|
}
|
|
}
|
|
pci_release_msi(sc->dev);
|
|
break;
|
|
case INTR_MODE_MSIX:
|
|
for (i = 0; i < sc->intr_count; i++) {
|
|
BLOGD(sc, DBG_LOAD, "Releasing MSI-X vector %d\n", i);
|
|
if (sc->intr[i].resource && sc->intr[i].rid) {
|
|
bus_release_resource(sc->dev,
|
|
SYS_RES_IRQ,
|
|
sc->intr[i].rid,
|
|
sc->intr[i].resource);
|
|
}
|
|
}
|
|
pci_release_msi(sc->dev);
|
|
break;
|
|
default:
|
|
/* nothing to do as initial allocation failed */
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This function determines and allocates the appropriate
|
|
* interrupt based on system capabilites and user request.
|
|
*
|
|
* The user may force a particular interrupt mode, specify
|
|
* the number of receive queues, specify the method for
|
|
* distribuitng received frames to receive queues, or use
|
|
* the default settings which will automatically select the
|
|
* best supported combination. In addition, the OS may or
|
|
* may not support certain combinations of these settings.
|
|
* This routine attempts to reconcile the settings requested
|
|
* by the user with the capabilites available from the system
|
|
* to select the optimal combination of features.
|
|
*
|
|
* Returns:
|
|
* 0 = Success, !0 = Failure.
|
|
*/
|
|
static int
|
|
bxe_interrupt_alloc(struct bxe_softc *sc)
|
|
{
|
|
int msix_count = 0;
|
|
int msi_count = 0;
|
|
int num_requested = 0;
|
|
int num_allocated = 0;
|
|
int rid, i, j;
|
|
int rc;
|
|
|
|
/* get the number of available MSI/MSI-X interrupts from the OS */
|
|
if (sc->interrupt_mode > 0) {
|
|
if (sc->devinfo.pcie_cap_flags & BXE_MSIX_CAPABLE_FLAG) {
|
|
msix_count = pci_msix_count(sc->dev);
|
|
}
|
|
|
|
if (sc->devinfo.pcie_cap_flags & BXE_MSI_CAPABLE_FLAG) {
|
|
msi_count = pci_msi_count(sc->dev);
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "%d MSI and %d MSI-X vectors available\n",
|
|
msi_count, msix_count);
|
|
}
|
|
|
|
do { /* try allocating MSI-X interrupt resources (at least 2) */
|
|
if (sc->interrupt_mode != INTR_MODE_MSIX) {
|
|
break;
|
|
}
|
|
|
|
if (((sc->devinfo.pcie_cap_flags & BXE_MSIX_CAPABLE_FLAG) == 0) ||
|
|
(msix_count < 2)) {
|
|
sc->interrupt_mode = INTR_MODE_MSI; /* try MSI next */
|
|
break;
|
|
}
|
|
|
|
/* ask for the necessary number of MSI-X vectors */
|
|
num_requested = min((sc->num_queues + 1), msix_count);
|
|
|
|
BLOGD(sc, DBG_LOAD, "Requesting %d MSI-X vectors\n", num_requested);
|
|
|
|
num_allocated = num_requested;
|
|
if ((rc = pci_alloc_msix(sc->dev, &num_allocated)) != 0) {
|
|
BLOGE(sc, "MSI-X alloc failed! (%d)\n", rc);
|
|
sc->interrupt_mode = INTR_MODE_MSI; /* try MSI next */
|
|
break;
|
|
}
|
|
|
|
if (num_allocated < 2) { /* possible? */
|
|
BLOGE(sc, "MSI-X allocation less than 2!\n");
|
|
sc->interrupt_mode = INTR_MODE_MSI; /* try MSI next */
|
|
pci_release_msi(sc->dev);
|
|
break;
|
|
}
|
|
|
|
BLOGI(sc, "MSI-X vectors Requested %d and Allocated %d\n",
|
|
num_requested, num_allocated);
|
|
|
|
/* best effort so use the number of vectors allocated to us */
|
|
sc->intr_count = num_allocated;
|
|
sc->num_queues = num_allocated - 1;
|
|
|
|
rid = 1; /* initial resource identifier */
|
|
|
|
/* allocate the MSI-X vectors */
|
|
for (i = 0; i < num_allocated; i++) {
|
|
sc->intr[i].rid = (rid + i);
|
|
|
|
if ((sc->intr[i].resource =
|
|
bus_alloc_resource_any(sc->dev,
|
|
SYS_RES_IRQ,
|
|
&sc->intr[i].rid,
|
|
RF_ACTIVE)) == NULL) {
|
|
BLOGE(sc, "Failed to map MSI-X[%d] (rid=%d)!\n",
|
|
i, (rid + i));
|
|
|
|
for (j = (i - 1); j >= 0; j--) {
|
|
bus_release_resource(sc->dev,
|
|
SYS_RES_IRQ,
|
|
sc->intr[j].rid,
|
|
sc->intr[j].resource);
|
|
}
|
|
|
|
sc->intr_count = 0;
|
|
sc->num_queues = 0;
|
|
sc->interrupt_mode = INTR_MODE_MSI; /* try MSI next */
|
|
pci_release_msi(sc->dev);
|
|
break;
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "Mapped MSI-X[%d] (rid=%d)\n", i, (rid + i));
|
|
}
|
|
} while (0);
|
|
|
|
do { /* try allocating MSI vector resources (at least 2) */
|
|
if (sc->interrupt_mode != INTR_MODE_MSI) {
|
|
break;
|
|
}
|
|
|
|
if (((sc->devinfo.pcie_cap_flags & BXE_MSI_CAPABLE_FLAG) == 0) ||
|
|
(msi_count < 1)) {
|
|
sc->interrupt_mode = INTR_MODE_INTX; /* try INTx next */
|
|
break;
|
|
}
|
|
|
|
/* ask for a single MSI vector */
|
|
num_requested = 1;
|
|
|
|
BLOGD(sc, DBG_LOAD, "Requesting %d MSI vectors\n", num_requested);
|
|
|
|
num_allocated = num_requested;
|
|
if ((rc = pci_alloc_msi(sc->dev, &num_allocated)) != 0) {
|
|
BLOGE(sc, "MSI alloc failed (%d)!\n", rc);
|
|
sc->interrupt_mode = INTR_MODE_INTX; /* try INTx next */
|
|
break;
|
|
}
|
|
|
|
if (num_allocated != 1) { /* possible? */
|
|
BLOGE(sc, "MSI allocation is not 1!\n");
|
|
sc->interrupt_mode = INTR_MODE_INTX; /* try INTx next */
|
|
pci_release_msi(sc->dev);
|
|
break;
|
|
}
|
|
|
|
BLOGI(sc, "MSI vectors Requested %d and Allocated %d\n",
|
|
num_requested, num_allocated);
|
|
|
|
/* best effort so use the number of vectors allocated to us */
|
|
sc->intr_count = num_allocated;
|
|
sc->num_queues = num_allocated;
|
|
|
|
rid = 1; /* initial resource identifier */
|
|
|
|
sc->intr[0].rid = rid;
|
|
|
|
if ((sc->intr[0].resource =
|
|
bus_alloc_resource_any(sc->dev,
|
|
SYS_RES_IRQ,
|
|
&sc->intr[0].rid,
|
|
RF_ACTIVE)) == NULL) {
|
|
BLOGE(sc, "Failed to map MSI[0] (rid=%d)!\n", rid);
|
|
sc->intr_count = 0;
|
|
sc->num_queues = 0;
|
|
sc->interrupt_mode = INTR_MODE_INTX; /* try INTx next */
|
|
pci_release_msi(sc->dev);
|
|
break;
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "Mapped MSI[0] (rid=%d)\n", rid);
|
|
} while (0);
|
|
|
|
do { /* try allocating INTx vector resources */
|
|
if (sc->interrupt_mode != INTR_MODE_INTX) {
|
|
break;
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "Requesting legacy INTx interrupt\n");
|
|
|
|
/* only one vector for INTx */
|
|
sc->intr_count = 1;
|
|
sc->num_queues = 1;
|
|
|
|
rid = 0; /* initial resource identifier */
|
|
|
|
sc->intr[0].rid = rid;
|
|
|
|
if ((sc->intr[0].resource =
|
|
bus_alloc_resource_any(sc->dev,
|
|
SYS_RES_IRQ,
|
|
&sc->intr[0].rid,
|
|
(RF_ACTIVE | RF_SHAREABLE))) == NULL) {
|
|
BLOGE(sc, "Failed to map INTx (rid=%d)!\n", rid);
|
|
sc->intr_count = 0;
|
|
sc->num_queues = 0;
|
|
sc->interrupt_mode = -1; /* Failed! */
|
|
break;
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "Mapped INTx (rid=%d)\n", rid);
|
|
} while (0);
|
|
|
|
if (sc->interrupt_mode == -1) {
|
|
BLOGE(sc, "Interrupt Allocation: FAILED!!!\n");
|
|
rc = 1;
|
|
} else {
|
|
BLOGD(sc, DBG_LOAD,
|
|
"Interrupt Allocation: interrupt_mode=%d, num_queues=%d\n",
|
|
sc->interrupt_mode, sc->num_queues);
|
|
rc = 0;
|
|
}
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static void
|
|
bxe_interrupt_detach(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_fastpath *fp;
|
|
int i;
|
|
|
|
/* release interrupt resources */
|
|
for (i = 0; i < sc->intr_count; i++) {
|
|
if (sc->intr[i].resource && sc->intr[i].tag) {
|
|
BLOGD(sc, DBG_LOAD, "Disabling interrupt vector %d\n", i);
|
|
bus_teardown_intr(sc->dev, sc->intr[i].resource, sc->intr[i].tag);
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
if (fp->tq) {
|
|
taskqueue_drain(fp->tq, &fp->tq_task);
|
|
taskqueue_free(fp->tq);
|
|
fp->tq = NULL;
|
|
}
|
|
}
|
|
|
|
if (sc->rx_mode_tq) {
|
|
taskqueue_drain(sc->rx_mode_tq, &sc->rx_mode_tq_task);
|
|
taskqueue_free(sc->rx_mode_tq);
|
|
sc->rx_mode_tq = NULL;
|
|
}
|
|
|
|
if (sc->sp_tq) {
|
|
taskqueue_drain(sc->sp_tq, &sc->sp_tq_task);
|
|
taskqueue_free(sc->sp_tq);
|
|
sc->sp_tq = NULL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Enables interrupts and attach to the ISR.
|
|
*
|
|
* When using multiple MSI/MSI-X vectors the first vector
|
|
* is used for slowpath operations while all remaining
|
|
* vectors are used for fastpath operations. If only a
|
|
* single MSI/MSI-X vector is used (SINGLE_ISR) then the
|
|
* ISR must look for both slowpath and fastpath completions.
|
|
*/
|
|
static int
|
|
bxe_interrupt_attach(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_fastpath *fp;
|
|
int rc = 0;
|
|
int i;
|
|
|
|
snprintf(sc->sp_tq_name, sizeof(sc->sp_tq_name),
|
|
"bxe%d_sp_tq", sc->unit);
|
|
TASK_INIT(&sc->sp_tq_task, 0, bxe_handle_sp_tq, sc);
|
|
sc->sp_tq = taskqueue_create_fast(sc->sp_tq_name, M_NOWAIT,
|
|
taskqueue_thread_enqueue,
|
|
&sc->sp_tq);
|
|
taskqueue_start_threads(&sc->sp_tq, 1, PWAIT, /* lower priority */
|
|
"%s", sc->sp_tq_name);
|
|
|
|
snprintf(sc->rx_mode_tq_name, sizeof(sc->rx_mode_tq_name),
|
|
"bxe%d_rx_mode_tq", sc->unit);
|
|
TASK_INIT(&sc->rx_mode_tq_task, 0, bxe_handle_rx_mode_tq, sc);
|
|
sc->rx_mode_tq = taskqueue_create_fast(sc->rx_mode_tq_name, M_NOWAIT,
|
|
taskqueue_thread_enqueue,
|
|
&sc->rx_mode_tq);
|
|
taskqueue_start_threads(&sc->rx_mode_tq, 1, PWAIT, /* lower priority */
|
|
"%s", sc->rx_mode_tq_name);
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
snprintf(fp->tq_name, sizeof(fp->tq_name),
|
|
"bxe%d_fp%d_tq", sc->unit, i);
|
|
TASK_INIT(&fp->tq_task, 0, bxe_handle_fp_tq, fp);
|
|
fp->tq = taskqueue_create_fast(fp->tq_name, M_NOWAIT,
|
|
taskqueue_thread_enqueue,
|
|
&fp->tq);
|
|
taskqueue_start_threads(&fp->tq, 1, PI_NET, /* higher priority */
|
|
"%s", fp->tq_name);
|
|
}
|
|
|
|
/* setup interrupt handlers */
|
|
if (sc->interrupt_mode == INTR_MODE_MSIX) {
|
|
BLOGD(sc, DBG_LOAD, "Enabling slowpath MSI-X[0] vector\n");
|
|
|
|
/*
|
|
* Setup the interrupt handler. Note that we pass the driver instance
|
|
* to the interrupt handler for the slowpath.
|
|
*/
|
|
if ((rc = bus_setup_intr(sc->dev, sc->intr[0].resource,
|
|
(INTR_TYPE_NET | INTR_MPSAFE),
|
|
NULL, bxe_intr_sp, sc,
|
|
&sc->intr[0].tag)) != 0) {
|
|
BLOGE(sc, "Failed to allocate MSI-X[0] vector (%d)\n", rc);
|
|
goto bxe_interrupt_attach_exit;
|
|
}
|
|
|
|
bus_describe_intr(sc->dev, sc->intr[0].resource,
|
|
sc->intr[0].tag, "sp");
|
|
|
|
/* bus_bind_intr(sc->dev, sc->intr[0].resource, 0); */
|
|
|
|
/* initialize the fastpath vectors (note the first was used for sp) */
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
BLOGD(sc, DBG_LOAD, "Enabling MSI-X[%d] vector\n", (i + 1));
|
|
|
|
/*
|
|
* Setup the interrupt handler. Note that we pass the
|
|
* fastpath context to the interrupt handler in this
|
|
* case.
|
|
*/
|
|
if ((rc = bus_setup_intr(sc->dev, sc->intr[i + 1].resource,
|
|
(INTR_TYPE_NET | INTR_MPSAFE),
|
|
NULL, bxe_intr_fp, fp,
|
|
&sc->intr[i + 1].tag)) != 0) {
|
|
BLOGE(sc, "Failed to allocate MSI-X[%d] vector (%d)\n",
|
|
(i + 1), rc);
|
|
goto bxe_interrupt_attach_exit;
|
|
}
|
|
|
|
bus_describe_intr(sc->dev, sc->intr[i + 1].resource,
|
|
sc->intr[i + 1].tag, "fp%02d", i);
|
|
|
|
/* bind the fastpath instance to a cpu */
|
|
if (sc->num_queues > 1) {
|
|
bus_bind_intr(sc->dev, sc->intr[i + 1].resource, i);
|
|
}
|
|
|
|
fp->state = BXE_FP_STATE_IRQ;
|
|
}
|
|
} else if (sc->interrupt_mode == INTR_MODE_MSI) {
|
|
BLOGD(sc, DBG_LOAD, "Enabling MSI[0] vector\n");
|
|
|
|
/*
|
|
* Setup the interrupt handler. Note that we pass the
|
|
* driver instance to the interrupt handler which
|
|
* will handle both the slowpath and fastpath.
|
|
*/
|
|
if ((rc = bus_setup_intr(sc->dev, sc->intr[0].resource,
|
|
(INTR_TYPE_NET | INTR_MPSAFE),
|
|
NULL, bxe_intr_legacy, sc,
|
|
&sc->intr[0].tag)) != 0) {
|
|
BLOGE(sc, "Failed to allocate MSI[0] vector (%d)\n", rc);
|
|
goto bxe_interrupt_attach_exit;
|
|
}
|
|
|
|
} else { /* (sc->interrupt_mode == INTR_MODE_INTX) */
|
|
BLOGD(sc, DBG_LOAD, "Enabling INTx interrupts\n");
|
|
|
|
/*
|
|
* Setup the interrupt handler. Note that we pass the
|
|
* driver instance to the interrupt handler which
|
|
* will handle both the slowpath and fastpath.
|
|
*/
|
|
if ((rc = bus_setup_intr(sc->dev, sc->intr[0].resource,
|
|
(INTR_TYPE_NET | INTR_MPSAFE),
|
|
NULL, bxe_intr_legacy, sc,
|
|
&sc->intr[0].tag)) != 0) {
|
|
BLOGE(sc, "Failed to allocate INTx interrupt (%d)\n", rc);
|
|
goto bxe_interrupt_attach_exit;
|
|
}
|
|
}
|
|
|
|
bxe_interrupt_attach_exit:
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static int bxe_init_hw_common_chip(struct bxe_softc *sc);
|
|
static int bxe_init_hw_common(struct bxe_softc *sc);
|
|
static int bxe_init_hw_port(struct bxe_softc *sc);
|
|
static int bxe_init_hw_func(struct bxe_softc *sc);
|
|
static void bxe_reset_common(struct bxe_softc *sc);
|
|
static void bxe_reset_port(struct bxe_softc *sc);
|
|
static void bxe_reset_func(struct bxe_softc *sc);
|
|
static int bxe_gunzip_init(struct bxe_softc *sc);
|
|
static void bxe_gunzip_end(struct bxe_softc *sc);
|
|
static int bxe_init_firmware(struct bxe_softc *sc);
|
|
static void bxe_release_firmware(struct bxe_softc *sc);
|
|
|
|
static struct
|
|
ecore_func_sp_drv_ops bxe_func_sp_drv = {
|
|
.init_hw_cmn_chip = bxe_init_hw_common_chip,
|
|
.init_hw_cmn = bxe_init_hw_common,
|
|
.init_hw_port = bxe_init_hw_port,
|
|
.init_hw_func = bxe_init_hw_func,
|
|
|
|
.reset_hw_cmn = bxe_reset_common,
|
|
.reset_hw_port = bxe_reset_port,
|
|
.reset_hw_func = bxe_reset_func,
|
|
|
|
.gunzip_init = bxe_gunzip_init,
|
|
.gunzip_end = bxe_gunzip_end,
|
|
|
|
.init_fw = bxe_init_firmware,
|
|
.release_fw = bxe_release_firmware,
|
|
};
|
|
|
|
static void
|
|
bxe_init_func_obj(struct bxe_softc *sc)
|
|
{
|
|
sc->dmae_ready = 0;
|
|
|
|
ecore_init_func_obj(sc,
|
|
&sc->func_obj,
|
|
BXE_SP(sc, func_rdata),
|
|
BXE_SP_MAPPING(sc, func_rdata),
|
|
BXE_SP(sc, func_afex_rdata),
|
|
BXE_SP_MAPPING(sc, func_afex_rdata),
|
|
&bxe_func_sp_drv);
|
|
}
|
|
|
|
static int
|
|
bxe_init_hw(struct bxe_softc *sc,
|
|
uint32_t load_code)
|
|
{
|
|
struct ecore_func_state_params func_params = { NULL };
|
|
int rc;
|
|
|
|
/* prepare the parameters for function state transitions */
|
|
bit_set(&func_params.ramrod_flags, RAMROD_COMP_WAIT);
|
|
|
|
func_params.f_obj = &sc->func_obj;
|
|
func_params.cmd = ECORE_F_CMD_HW_INIT;
|
|
|
|
func_params.params.hw_init.load_phase = load_code;
|
|
|
|
/*
|
|
* Via a plethora of function pointers, we will eventually reach
|
|
* bxe_init_hw_common(), bxe_init_hw_port(), or bxe_init_hw_func().
|
|
*/
|
|
rc = ecore_func_state_change(sc, &func_params);
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static void
|
|
bxe_fill(struct bxe_softc *sc,
|
|
uint32_t addr,
|
|
int fill,
|
|
uint32_t len)
|
|
{
|
|
uint32_t i;
|
|
|
|
if (!(len % 4) && !(addr % 4)) {
|
|
for (i = 0; i < len; i += 4) {
|
|
REG_WR(sc, (addr + i), fill);
|
|
}
|
|
} else {
|
|
for (i = 0; i < len; i++) {
|
|
REG_WR8(sc, (addr + i), fill);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* writes FP SP data to FW - data_size in dwords */
|
|
static void
|
|
bxe_wr_fp_sb_data(struct bxe_softc *sc,
|
|
int fw_sb_id,
|
|
uint32_t *sb_data_p,
|
|
uint32_t data_size)
|
|
{
|
|
int index;
|
|
|
|
for (index = 0; index < data_size; index++) {
|
|
REG_WR(sc,
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id) +
|
|
(sizeof(uint32_t) * index)),
|
|
*(sb_data_p + index));
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_zero_fp_sb(struct bxe_softc *sc,
|
|
int fw_sb_id)
|
|
{
|
|
struct hc_status_block_data_e2 sb_data_e2;
|
|
struct hc_status_block_data_e1x sb_data_e1x;
|
|
uint32_t *sb_data_p;
|
|
uint32_t data_size = 0;
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
|
|
sb_data_e2.common.state = SB_DISABLED;
|
|
sb_data_e2.common.p_func.vf_valid = FALSE;
|
|
sb_data_p = (uint32_t *)&sb_data_e2;
|
|
data_size = (sizeof(struct hc_status_block_data_e2) /
|
|
sizeof(uint32_t));
|
|
} else {
|
|
memset(&sb_data_e1x, 0, sizeof(struct hc_status_block_data_e1x));
|
|
sb_data_e1x.common.state = SB_DISABLED;
|
|
sb_data_e1x.common.p_func.vf_valid = FALSE;
|
|
sb_data_p = (uint32_t *)&sb_data_e1x;
|
|
data_size = (sizeof(struct hc_status_block_data_e1x) /
|
|
sizeof(uint32_t));
|
|
}
|
|
|
|
bxe_wr_fp_sb_data(sc, fw_sb_id, sb_data_p, data_size);
|
|
|
|
bxe_fill(sc, (BAR_CSTRORM_INTMEM + CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id)),
|
|
0, CSTORM_STATUS_BLOCK_SIZE);
|
|
bxe_fill(sc, (BAR_CSTRORM_INTMEM + CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id)),
|
|
0, CSTORM_SYNC_BLOCK_SIZE);
|
|
}
|
|
|
|
static void
|
|
bxe_wr_sp_sb_data(struct bxe_softc *sc,
|
|
struct hc_sp_status_block_data *sp_sb_data)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0;
|
|
i < (sizeof(struct hc_sp_status_block_data) / sizeof(uint32_t));
|
|
i++) {
|
|
REG_WR(sc,
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(SC_FUNC(sc)) +
|
|
(i * sizeof(uint32_t))),
|
|
*((uint32_t *)sp_sb_data + i));
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_zero_sp_sb(struct bxe_softc *sc)
|
|
{
|
|
struct hc_sp_status_block_data sp_sb_data;
|
|
|
|
memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
|
|
|
|
sp_sb_data.state = SB_DISABLED;
|
|
sp_sb_data.p_func.vf_valid = FALSE;
|
|
|
|
bxe_wr_sp_sb_data(sc, &sp_sb_data);
|
|
|
|
bxe_fill(sc,
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_SP_STATUS_BLOCK_OFFSET(SC_FUNC(sc))),
|
|
0, CSTORM_SP_STATUS_BLOCK_SIZE);
|
|
bxe_fill(sc,
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_SP_SYNC_BLOCK_OFFSET(SC_FUNC(sc))),
|
|
0, CSTORM_SP_SYNC_BLOCK_SIZE);
|
|
}
|
|
|
|
static void
|
|
bxe_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm,
|
|
int igu_sb_id,
|
|
int igu_seg_id)
|
|
{
|
|
hc_sm->igu_sb_id = igu_sb_id;
|
|
hc_sm->igu_seg_id = igu_seg_id;
|
|
hc_sm->timer_value = 0xFF;
|
|
hc_sm->time_to_expire = 0xFFFFFFFF;
|
|
}
|
|
|
|
static void
|
|
bxe_map_sb_state_machines(struct hc_index_data *index_data)
|
|
{
|
|
/* zero out state machine indices */
|
|
|
|
/* rx indices */
|
|
index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
|
|
|
|
/* tx indices */
|
|
index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID;
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID;
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID;
|
|
|
|
/* map indices */
|
|
|
|
/* rx indices */
|
|
index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |=
|
|
(SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
|
|
|
|
/* tx indices */
|
|
index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |=
|
|
(SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |=
|
|
(SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |=
|
|
(SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |=
|
|
(SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
|
|
}
|
|
|
|
static void
|
|
bxe_init_sb(struct bxe_softc *sc,
|
|
bus_addr_t busaddr,
|
|
int vfid,
|
|
uint8_t vf_valid,
|
|
int fw_sb_id,
|
|
int igu_sb_id)
|
|
{
|
|
struct hc_status_block_data_e2 sb_data_e2;
|
|
struct hc_status_block_data_e1x sb_data_e1x;
|
|
struct hc_status_block_sm *hc_sm_p;
|
|
uint32_t *sb_data_p;
|
|
int igu_seg_id;
|
|
int data_size;
|
|
|
|
if (CHIP_INT_MODE_IS_BC(sc)) {
|
|
igu_seg_id = HC_SEG_ACCESS_NORM;
|
|
} else {
|
|
igu_seg_id = IGU_SEG_ACCESS_NORM;
|
|
}
|
|
|
|
bxe_zero_fp_sb(sc, fw_sb_id);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
|
|
sb_data_e2.common.state = SB_ENABLED;
|
|
sb_data_e2.common.p_func.pf_id = SC_FUNC(sc);
|
|
sb_data_e2.common.p_func.vf_id = vfid;
|
|
sb_data_e2.common.p_func.vf_valid = vf_valid;
|
|
sb_data_e2.common.p_func.vnic_id = SC_VN(sc);
|
|
sb_data_e2.common.same_igu_sb_1b = TRUE;
|
|
sb_data_e2.common.host_sb_addr.hi = U64_HI(busaddr);
|
|
sb_data_e2.common.host_sb_addr.lo = U64_LO(busaddr);
|
|
hc_sm_p = sb_data_e2.common.state_machine;
|
|
sb_data_p = (uint32_t *)&sb_data_e2;
|
|
data_size = (sizeof(struct hc_status_block_data_e2) /
|
|
sizeof(uint32_t));
|
|
bxe_map_sb_state_machines(sb_data_e2.index_data);
|
|
} else {
|
|
memset(&sb_data_e1x, 0, sizeof(struct hc_status_block_data_e1x));
|
|
sb_data_e1x.common.state = SB_ENABLED;
|
|
sb_data_e1x.common.p_func.pf_id = SC_FUNC(sc);
|
|
sb_data_e1x.common.p_func.vf_id = 0xff;
|
|
sb_data_e1x.common.p_func.vf_valid = FALSE;
|
|
sb_data_e1x.common.p_func.vnic_id = SC_VN(sc);
|
|
sb_data_e1x.common.same_igu_sb_1b = TRUE;
|
|
sb_data_e1x.common.host_sb_addr.hi = U64_HI(busaddr);
|
|
sb_data_e1x.common.host_sb_addr.lo = U64_LO(busaddr);
|
|
hc_sm_p = sb_data_e1x.common.state_machine;
|
|
sb_data_p = (uint32_t *)&sb_data_e1x;
|
|
data_size = (sizeof(struct hc_status_block_data_e1x) /
|
|
sizeof(uint32_t));
|
|
bxe_map_sb_state_machines(sb_data_e1x.index_data);
|
|
}
|
|
|
|
bxe_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID], igu_sb_id, igu_seg_id);
|
|
bxe_setup_ndsb_state_machine(&hc_sm_p[SM_TX_ID], igu_sb_id, igu_seg_id);
|
|
|
|
BLOGD(sc, DBG_LOAD, "Init FW SB %d\n", fw_sb_id);
|
|
|
|
/* write indices to HW - PCI guarantees endianity of regpairs */
|
|
bxe_wr_fp_sb_data(sc, fw_sb_id, sb_data_p, data_size);
|
|
}
|
|
|
|
static inline uint8_t
|
|
bxe_fp_qzone_id(struct bxe_fastpath *fp)
|
|
{
|
|
if (CHIP_IS_E1x(fp->sc)) {
|
|
return (fp->cl_id + SC_PORT(fp->sc) * ETH_MAX_RX_CLIENTS_E1H);
|
|
} else {
|
|
return (fp->cl_id);
|
|
}
|
|
}
|
|
|
|
static inline uint32_t
|
|
bxe_rx_ustorm_prods_offset(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp)
|
|
{
|
|
uint32_t offset = BAR_USTRORM_INTMEM;
|
|
|
|
#if 0
|
|
if (IS_VF(sc)) {
|
|
return (PXP_VF_ADDR_USDM_QUEUES_START +
|
|
(sc->acquire_resp.resc.hw_qid[fp->index] *
|
|
sizeof(struct ustorm_queue_zone_data)));
|
|
} else
|
|
#endif
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
offset += USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id);
|
|
} else {
|
|
offset += USTORM_RX_PRODS_E1X_OFFSET(SC_PORT(sc), fp->cl_id);
|
|
}
|
|
|
|
return (offset);
|
|
}
|
|
|
|
static void
|
|
bxe_init_eth_fp(struct bxe_softc *sc,
|
|
int idx)
|
|
{
|
|
struct bxe_fastpath *fp = &sc->fp[idx];
|
|
uint32_t cids[ECORE_MULTI_TX_COS] = { 0 };
|
|
unsigned long q_type = 0;
|
|
int cos;
|
|
|
|
fp->sc = sc;
|
|
fp->index = idx;
|
|
|
|
snprintf(fp->tx_mtx_name, sizeof(fp->tx_mtx_name),
|
|
"bxe%d_fp%d_tx_lock", sc->unit, idx);
|
|
mtx_init(&fp->tx_mtx, fp->tx_mtx_name, NULL, MTX_DEF);
|
|
|
|
snprintf(fp->rx_mtx_name, sizeof(fp->rx_mtx_name),
|
|
"bxe%d_fp%d_rx_lock", sc->unit, idx);
|
|
mtx_init(&fp->rx_mtx, fp->rx_mtx_name, NULL, MTX_DEF);
|
|
|
|
fp->igu_sb_id = (sc->igu_base_sb + idx + CNIC_SUPPORT(sc));
|
|
fp->fw_sb_id = (sc->base_fw_ndsb + idx + CNIC_SUPPORT(sc));
|
|
|
|
fp->cl_id = (CHIP_IS_E1x(sc)) ?
|
|
(SC_L_ID(sc) + idx) :
|
|
/* want client ID same as IGU SB ID for non-E1 */
|
|
fp->igu_sb_id;
|
|
fp->cl_qzone_id = bxe_fp_qzone_id(fp);
|
|
|
|
/* setup sb indices */
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
fp->sb_index_values = fp->status_block.e2_sb->sb.index_values;
|
|
fp->sb_running_index = fp->status_block.e2_sb->sb.running_index;
|
|
} else {
|
|
fp->sb_index_values = fp->status_block.e1x_sb->sb.index_values;
|
|
fp->sb_running_index = fp->status_block.e1x_sb->sb.running_index;
|
|
}
|
|
|
|
/* init shortcut */
|
|
fp->ustorm_rx_prods_offset = bxe_rx_ustorm_prods_offset(sc, fp);
|
|
|
|
fp->rx_cq_cons_sb = &fp->sb_index_values[HC_INDEX_ETH_RX_CQ_CONS];
|
|
|
|
/*
|
|
* XXX If multiple CoS is ever supported then each fastpath structure
|
|
* will need to maintain tx producer/consumer/dma/etc values *per* CoS.
|
|
*/
|
|
for (cos = 0; cos < sc->max_cos; cos++) {
|
|
cids[cos] = idx;
|
|
}
|
|
fp->tx_cons_sb = &fp->sb_index_values[HC_INDEX_ETH_TX_CQ_CONS_COS0];
|
|
|
|
/* nothing more for a VF to do */
|
|
if (IS_VF(sc)) {
|
|
return;
|
|
}
|
|
|
|
bxe_init_sb(sc, fp->sb_dma.paddr, BXE_VF_ID_INVALID, FALSE,
|
|
fp->fw_sb_id, fp->igu_sb_id);
|
|
|
|
bxe_update_fp_sb_idx(fp);
|
|
|
|
/* Configure Queue State object */
|
|
bit_set(&q_type, ECORE_Q_TYPE_HAS_RX);
|
|
bit_set(&q_type, ECORE_Q_TYPE_HAS_TX);
|
|
|
|
ecore_init_queue_obj(sc,
|
|
&sc->sp_objs[idx].q_obj,
|
|
fp->cl_id,
|
|
cids,
|
|
sc->max_cos,
|
|
SC_FUNC(sc),
|
|
BXE_SP(sc, q_rdata),
|
|
BXE_SP_MAPPING(sc, q_rdata),
|
|
q_type);
|
|
|
|
/* configure classification DBs */
|
|
ecore_init_mac_obj(sc,
|
|
&sc->sp_objs[idx].mac_obj,
|
|
fp->cl_id,
|
|
idx,
|
|
SC_FUNC(sc),
|
|
BXE_SP(sc, mac_rdata),
|
|
BXE_SP_MAPPING(sc, mac_rdata),
|
|
ECORE_FILTER_MAC_PENDING,
|
|
&sc->sp_state,
|
|
ECORE_OBJ_TYPE_RX_TX,
|
|
&sc->macs_pool);
|
|
|
|
BLOGD(sc, DBG_LOAD, "fp[%d]: sb=%p cl_id=%d fw_sb=%d igu_sb=%d\n",
|
|
idx, fp->status_block.e2_sb, fp->cl_id, fp->fw_sb_id, fp->igu_sb_id);
|
|
}
|
|
|
|
static inline void
|
|
bxe_update_rx_prod(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp,
|
|
uint16_t rx_bd_prod,
|
|
uint16_t rx_cq_prod,
|
|
uint16_t rx_sge_prod)
|
|
{
|
|
struct ustorm_eth_rx_producers rx_prods = { 0 };
|
|
uint32_t i;
|
|
|
|
/* update producers */
|
|
rx_prods.bd_prod = rx_bd_prod;
|
|
rx_prods.cqe_prod = rx_cq_prod;
|
|
rx_prods.sge_prod = rx_sge_prod;
|
|
|
|
/*
|
|
* Make sure that the BD and SGE data is updated before updating the
|
|
* producers since FW might read the BD/SGE right after the producer
|
|
* is updated.
|
|
* This is only applicable for weak-ordered memory model archs such
|
|
* as IA-64. The following barrier is also mandatory since FW will
|
|
* assumes BDs must have buffers.
|
|
*/
|
|
wmb();
|
|
|
|
for (i = 0; i < (sizeof(rx_prods) / 4); i++) {
|
|
REG_WR(sc,
|
|
(fp->ustorm_rx_prods_offset + (i * 4)),
|
|
((uint32_t *)&rx_prods)[i]);
|
|
}
|
|
|
|
wmb(); /* keep prod updates ordered */
|
|
|
|
BLOGD(sc, DBG_RX,
|
|
"RX fp[%d]: wrote prods bd_prod=%u cqe_prod=%u sge_prod=%u\n",
|
|
fp->index, rx_bd_prod, rx_cq_prod, rx_sge_prod);
|
|
}
|
|
|
|
static void
|
|
bxe_init_rx_rings(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_fastpath *fp;
|
|
int i;
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
|
|
fp->rx_bd_cons = 0;
|
|
|
|
/*
|
|
* Activate the BD ring...
|
|
* Warning, this will generate an interrupt (to the TSTORM)
|
|
* so this can only be done after the chip is initialized
|
|
*/
|
|
bxe_update_rx_prod(sc, fp,
|
|
fp->rx_bd_prod,
|
|
fp->rx_cq_prod,
|
|
fp->rx_sge_prod);
|
|
|
|
if (i != 0) {
|
|
continue;
|
|
}
|
|
|
|
if (CHIP_IS_E1(sc)) {
|
|
REG_WR(sc,
|
|
(BAR_USTRORM_INTMEM +
|
|
USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(SC_FUNC(sc))),
|
|
U64_LO(fp->rcq_dma.paddr));
|
|
REG_WR(sc,
|
|
(BAR_USTRORM_INTMEM +
|
|
USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(SC_FUNC(sc)) + 4),
|
|
U64_HI(fp->rcq_dma.paddr));
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_init_tx_ring_one(struct bxe_fastpath *fp)
|
|
{
|
|
SET_FLAG(fp->tx_db.data.header.header, DOORBELL_HDR_DB_TYPE, 1);
|
|
fp->tx_db.data.zero_fill1 = 0;
|
|
fp->tx_db.data.prod = 0;
|
|
|
|
fp->tx_pkt_prod = 0;
|
|
fp->tx_pkt_cons = 0;
|
|
fp->tx_bd_prod = 0;
|
|
fp->tx_bd_cons = 0;
|
|
fp->eth_q_stats.tx_pkts = 0;
|
|
}
|
|
|
|
static inline void
|
|
bxe_init_tx_rings(struct bxe_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
#if 0
|
|
uint8_t cos;
|
|
for (cos = 0; cos < sc->max_cos; cos++) {
|
|
bxe_init_tx_ring_one(&sc->fp[i].txdata[cos]);
|
|
}
|
|
#else
|
|
bxe_init_tx_ring_one(&sc->fp[i]);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_init_def_sb(struct bxe_softc *sc)
|
|
{
|
|
struct host_sp_status_block *def_sb = sc->def_sb;
|
|
bus_addr_t mapping = sc->def_sb_dma.paddr;
|
|
int igu_sp_sb_index;
|
|
int igu_seg_id;
|
|
int port = SC_PORT(sc);
|
|
int func = SC_FUNC(sc);
|
|
int reg_offset, reg_offset_en5;
|
|
uint64_t section;
|
|
int index, sindex;
|
|
struct hc_sp_status_block_data sp_sb_data;
|
|
|
|
memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
|
|
|
|
if (CHIP_INT_MODE_IS_BC(sc)) {
|
|
igu_sp_sb_index = DEF_SB_IGU_ID;
|
|
igu_seg_id = HC_SEG_ACCESS_DEF;
|
|
} else {
|
|
igu_sp_sb_index = sc->igu_dsb_id;
|
|
igu_seg_id = IGU_SEG_ACCESS_DEF;
|
|
}
|
|
|
|
/* attentions */
|
|
section = ((uint64_t)mapping +
|
|
offsetof(struct host_sp_status_block, atten_status_block));
|
|
def_sb->atten_status_block.status_block_id = igu_sp_sb_index;
|
|
sc->attn_state = 0;
|
|
|
|
reg_offset = (port) ?
|
|
MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
|
|
reg_offset_en5 = (port) ?
|
|
MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 :
|
|
MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0;
|
|
|
|
for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
|
|
/* take care of sig[0]..sig[4] */
|
|
for (sindex = 0; sindex < 4; sindex++) {
|
|
sc->attn_group[index].sig[sindex] =
|
|
REG_RD(sc, (reg_offset + (sindex * 0x4) + (0x10 * index)));
|
|
}
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/*
|
|
* enable5 is separate from the rest of the registers,
|
|
* and the address skip is 4 and not 16 between the
|
|
* different groups
|
|
*/
|
|
sc->attn_group[index].sig[4] =
|
|
REG_RD(sc, (reg_offset_en5 + (0x4 * index)));
|
|
} else {
|
|
sc->attn_group[index].sig[4] = 0;
|
|
}
|
|
}
|
|
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
reg_offset = (port) ?
|
|
HC_REG_ATTN_MSG1_ADDR_L :
|
|
HC_REG_ATTN_MSG0_ADDR_L;
|
|
REG_WR(sc, reg_offset, U64_LO(section));
|
|
REG_WR(sc, (reg_offset + 4), U64_HI(section));
|
|
} else if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, IGU_REG_ATTN_MSG_ADDR_L, U64_LO(section));
|
|
REG_WR(sc, IGU_REG_ATTN_MSG_ADDR_H, U64_HI(section));
|
|
}
|
|
|
|
section = ((uint64_t)mapping +
|
|
offsetof(struct host_sp_status_block, sp_sb));
|
|
|
|
bxe_zero_sp_sb(sc);
|
|
|
|
/* PCI guarantees endianity of regpair */
|
|
sp_sb_data.state = SB_ENABLED;
|
|
sp_sb_data.host_sb_addr.lo = U64_LO(section);
|
|
sp_sb_data.host_sb_addr.hi = U64_HI(section);
|
|
sp_sb_data.igu_sb_id = igu_sp_sb_index;
|
|
sp_sb_data.igu_seg_id = igu_seg_id;
|
|
sp_sb_data.p_func.pf_id = func;
|
|
sp_sb_data.p_func.vnic_id = SC_VN(sc);
|
|
sp_sb_data.p_func.vf_id = 0xff;
|
|
|
|
bxe_wr_sp_sb_data(sc, &sp_sb_data);
|
|
|
|
bxe_ack_sb(sc, sc->igu_dsb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);
|
|
}
|
|
|
|
static void
|
|
bxe_init_sp_ring(struct bxe_softc *sc)
|
|
{
|
|
atomic_store_rel_long(&sc->cq_spq_left, MAX_SPQ_PENDING);
|
|
sc->spq_prod_idx = 0;
|
|
sc->dsb_sp_prod = &sc->def_sb->sp_sb.index_values[HC_SP_INDEX_ETH_DEF_CONS];
|
|
sc->spq_prod_bd = sc->spq;
|
|
sc->spq_last_bd = (sc->spq_prod_bd + MAX_SP_DESC_CNT);
|
|
}
|
|
|
|
static void
|
|
bxe_init_eq_ring(struct bxe_softc *sc)
|
|
{
|
|
union event_ring_elem *elem;
|
|
int i;
|
|
|
|
for (i = 1; i <= NUM_EQ_PAGES; i++) {
|
|
elem = &sc->eq[EQ_DESC_CNT_PAGE * i - 1];
|
|
|
|
elem->next_page.addr.hi = htole32(U64_HI(sc->eq_dma.paddr +
|
|
BCM_PAGE_SIZE *
|
|
(i % NUM_EQ_PAGES)));
|
|
elem->next_page.addr.lo = htole32(U64_LO(sc->eq_dma.paddr +
|
|
BCM_PAGE_SIZE *
|
|
(i % NUM_EQ_PAGES)));
|
|
}
|
|
|
|
sc->eq_cons = 0;
|
|
sc->eq_prod = NUM_EQ_DESC;
|
|
sc->eq_cons_sb = &sc->def_sb->sp_sb.index_values[HC_SP_INDEX_EQ_CONS];
|
|
|
|
atomic_store_rel_long(&sc->eq_spq_left,
|
|
(min((MAX_SP_DESC_CNT - MAX_SPQ_PENDING),
|
|
NUM_EQ_DESC) - 1));
|
|
}
|
|
|
|
static void
|
|
bxe_init_internal_common(struct bxe_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
if (IS_MF_SI(sc)) {
|
|
/*
|
|
* In switch independent mode, the TSTORM needs to accept
|
|
* packets that failed classification, since approximate match
|
|
* mac addresses aren't written to NIG LLH.
|
|
*/
|
|
REG_WR8(sc,
|
|
(BAR_TSTRORM_INTMEM + TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET),
|
|
2);
|
|
} else if (!CHIP_IS_E1(sc)) { /* 57710 doesn't support MF */
|
|
REG_WR8(sc,
|
|
(BAR_TSTRORM_INTMEM + TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET),
|
|
0);
|
|
}
|
|
|
|
/*
|
|
* Zero this manually as its initialization is currently missing
|
|
* in the initTool.
|
|
*/
|
|
for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++) {
|
|
REG_WR(sc,
|
|
(BAR_USTRORM_INTMEM + USTORM_AGG_DATA_OFFSET + (i * 4)),
|
|
0);
|
|
}
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_IGU_MODE_OFFSET),
|
|
CHIP_INT_MODE_IS_BC(sc) ? HC_IGU_BC_MODE : HC_IGU_NBC_MODE);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_init_internal(struct bxe_softc *sc,
|
|
uint32_t load_code)
|
|
{
|
|
switch (load_code) {
|
|
case FW_MSG_CODE_DRV_LOAD_COMMON:
|
|
case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP:
|
|
bxe_init_internal_common(sc);
|
|
/* no break */
|
|
|
|
case FW_MSG_CODE_DRV_LOAD_PORT:
|
|
/* nothing to do */
|
|
/* no break */
|
|
|
|
case FW_MSG_CODE_DRV_LOAD_FUNCTION:
|
|
/* internal memory per function is initialized inside bxe_pf_init */
|
|
break;
|
|
|
|
default:
|
|
BLOGE(sc, "Unknown load_code (0x%x) from MCP\n", load_code);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
storm_memset_func_cfg(struct bxe_softc *sc,
|
|
struct tstorm_eth_function_common_config *tcfg,
|
|
uint16_t abs_fid)
|
|
{
|
|
uint32_t addr;
|
|
size_t size;
|
|
|
|
addr = (BAR_TSTRORM_INTMEM +
|
|
TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(abs_fid));
|
|
size = sizeof(struct tstorm_eth_function_common_config);
|
|
ecore_storm_memset_struct(sc, addr, size, (uint32_t *)tcfg);
|
|
}
|
|
|
|
static void
|
|
bxe_func_init(struct bxe_softc *sc,
|
|
struct bxe_func_init_params *p)
|
|
{
|
|
struct tstorm_eth_function_common_config tcfg = { 0 };
|
|
|
|
if (CHIP_IS_E1x(sc)) {
|
|
storm_memset_func_cfg(sc, &tcfg, p->func_id);
|
|
}
|
|
|
|
/* Enable the function in the FW */
|
|
storm_memset_vf_to_pf(sc, p->func_id, p->pf_id);
|
|
storm_memset_func_en(sc, p->func_id, 1);
|
|
|
|
/* spq */
|
|
if (p->func_flgs & FUNC_FLG_SPQ) {
|
|
storm_memset_spq_addr(sc, p->spq_map, p->func_id);
|
|
REG_WR(sc,
|
|
(XSEM_REG_FAST_MEMORY + XSTORM_SPQ_PROD_OFFSET(p->func_id)),
|
|
p->spq_prod);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Calculates the sum of vn_min_rates.
|
|
* It's needed for further normalizing of the min_rates.
|
|
* Returns:
|
|
* sum of vn_min_rates.
|
|
* or
|
|
* 0 - if all the min_rates are 0.
|
|
* In the later case fainess algorithm should be deactivated.
|
|
* If all min rates are not zero then those that are zeroes will be set to 1.
|
|
*/
|
|
static void
|
|
bxe_calc_vn_min(struct bxe_softc *sc,
|
|
struct cmng_init_input *input)
|
|
{
|
|
uint32_t vn_cfg;
|
|
uint32_t vn_min_rate;
|
|
int all_zero = 1;
|
|
int vn;
|
|
|
|
for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
|
|
vn_cfg = sc->devinfo.mf_info.mf_config[vn];
|
|
vn_min_rate = (((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
|
|
FUNC_MF_CFG_MIN_BW_SHIFT) * 100);
|
|
|
|
if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
|
|
/* skip hidden VNs */
|
|
vn_min_rate = 0;
|
|
} else if (!vn_min_rate) {
|
|
/* If min rate is zero - set it to 100 */
|
|
vn_min_rate = DEF_MIN_RATE;
|
|
} else {
|
|
all_zero = 0;
|
|
}
|
|
|
|
input->vnic_min_rate[vn] = vn_min_rate;
|
|
}
|
|
|
|
/* if ETS or all min rates are zeros - disable fairness */
|
|
if (BXE_IS_ETS_ENABLED(sc)) {
|
|
input->flags.cmng_enables &= ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
|
|
BLOGD(sc, DBG_LOAD, "Fairness disabled (ETS)\n");
|
|
} else if (all_zero) {
|
|
input->flags.cmng_enables &= ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
|
|
BLOGD(sc, DBG_LOAD,
|
|
"Fariness disabled (all MIN values are zeroes)\n");
|
|
} else {
|
|
input->flags.cmng_enables |= CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
|
|
}
|
|
}
|
|
|
|
static inline uint16_t
|
|
bxe_extract_max_cfg(struct bxe_softc *sc,
|
|
uint32_t mf_cfg)
|
|
{
|
|
uint16_t max_cfg = ((mf_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
|
|
FUNC_MF_CFG_MAX_BW_SHIFT);
|
|
|
|
if (!max_cfg) {
|
|
BLOGD(sc, DBG_LOAD, "Max BW configured to 0 - using 100 instead\n");
|
|
max_cfg = 100;
|
|
}
|
|
|
|
return (max_cfg);
|
|
}
|
|
|
|
static void
|
|
bxe_calc_vn_max(struct bxe_softc *sc,
|
|
int vn,
|
|
struct cmng_init_input *input)
|
|
{
|
|
uint16_t vn_max_rate;
|
|
uint32_t vn_cfg = sc->devinfo.mf_info.mf_config[vn];
|
|
uint32_t max_cfg;
|
|
|
|
if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
|
|
vn_max_rate = 0;
|
|
} else {
|
|
max_cfg = bxe_extract_max_cfg(sc, vn_cfg);
|
|
|
|
if (IS_MF_SI(sc)) {
|
|
/* max_cfg in percents of linkspeed */
|
|
vn_max_rate = ((sc->link_vars.line_speed * max_cfg) / 100);
|
|
} else { /* SD modes */
|
|
/* max_cfg is absolute in 100Mb units */
|
|
vn_max_rate = (max_cfg * 100);
|
|
}
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "vn %d: vn_max_rate %d\n", vn, vn_max_rate);
|
|
|
|
input->vnic_max_rate[vn] = vn_max_rate;
|
|
}
|
|
|
|
static void
|
|
bxe_cmng_fns_init(struct bxe_softc *sc,
|
|
uint8_t read_cfg,
|
|
uint8_t cmng_type)
|
|
{
|
|
struct cmng_init_input input;
|
|
int vn;
|
|
|
|
memset(&input, 0, sizeof(struct cmng_init_input));
|
|
|
|
input.port_rate = sc->link_vars.line_speed;
|
|
|
|
if (cmng_type == CMNG_FNS_MINMAX) {
|
|
/* read mf conf from shmem */
|
|
if (read_cfg) {
|
|
bxe_read_mf_cfg(sc);
|
|
}
|
|
|
|
/* get VN min rate and enable fairness if not 0 */
|
|
bxe_calc_vn_min(sc, &input);
|
|
|
|
/* get VN max rate */
|
|
if (sc->port.pmf) {
|
|
for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
|
|
bxe_calc_vn_max(sc, vn, &input);
|
|
}
|
|
}
|
|
|
|
/* always enable rate shaping and fairness */
|
|
input.flags.cmng_enables |= CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN;
|
|
|
|
ecore_init_cmng(&input, &sc->cmng);
|
|
return;
|
|
}
|
|
|
|
/* rate shaping and fairness are disabled */
|
|
BLOGD(sc, DBG_LOAD, "rate shaping and fairness have been disabled\n");
|
|
}
|
|
|
|
static int
|
|
bxe_get_cmng_fns_mode(struct bxe_softc *sc)
|
|
{
|
|
if (CHIP_REV_IS_SLOW(sc)) {
|
|
return (CMNG_FNS_NONE);
|
|
}
|
|
|
|
if (IS_MF(sc)) {
|
|
return (CMNG_FNS_MINMAX);
|
|
}
|
|
|
|
return (CMNG_FNS_NONE);
|
|
}
|
|
|
|
static void
|
|
storm_memset_cmng(struct bxe_softc *sc,
|
|
struct cmng_init *cmng,
|
|
uint8_t port)
|
|
{
|
|
int vn;
|
|
int func;
|
|
uint32_t addr;
|
|
size_t size;
|
|
|
|
addr = (BAR_XSTRORM_INTMEM +
|
|
XSTORM_CMNG_PER_PORT_VARS_OFFSET(port));
|
|
size = sizeof(struct cmng_struct_per_port);
|
|
ecore_storm_memset_struct(sc, addr, size, (uint32_t *)&cmng->port);
|
|
|
|
for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
|
|
func = func_by_vn(sc, vn);
|
|
|
|
addr = (BAR_XSTRORM_INTMEM +
|
|
XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func));
|
|
size = sizeof(struct rate_shaping_vars_per_vn);
|
|
ecore_storm_memset_struct(sc, addr, size,
|
|
(uint32_t *)&cmng->vnic.vnic_max_rate[vn]);
|
|
|
|
addr = (BAR_XSTRORM_INTMEM +
|
|
XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func));
|
|
size = sizeof(struct fairness_vars_per_vn);
|
|
ecore_storm_memset_struct(sc, addr, size,
|
|
(uint32_t *)&cmng->vnic.vnic_min_rate[vn]);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_pf_init(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_func_init_params func_init = { 0 };
|
|
struct event_ring_data eq_data = { { 0 } };
|
|
uint16_t flags;
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/* reset IGU PF statistics: MSIX + ATTN */
|
|
/* PF */
|
|
REG_WR(sc,
|
|
(IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
|
|
(BXE_IGU_STAS_MSG_VF_CNT * 4) +
|
|
((CHIP_IS_MODE_4_PORT(sc) ? SC_FUNC(sc) : SC_VN(sc)) * 4)),
|
|
0);
|
|
/* ATTN */
|
|
REG_WR(sc,
|
|
(IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
|
|
(BXE_IGU_STAS_MSG_VF_CNT * 4) +
|
|
(BXE_IGU_STAS_MSG_PF_CNT * 4) +
|
|
((CHIP_IS_MODE_4_PORT(sc) ? SC_FUNC(sc) : SC_VN(sc)) * 4)),
|
|
0);
|
|
}
|
|
|
|
/* function setup flags */
|
|
flags = (FUNC_FLG_STATS | FUNC_FLG_LEADING | FUNC_FLG_SPQ);
|
|
|
|
/*
|
|
* This flag is relevant for E1x only.
|
|
* E2 doesn't have a TPA configuration in a function level.
|
|
*/
|
|
flags |= (if_getcapenable(sc->ifp) & IFCAP_LRO) ? FUNC_FLG_TPA : 0;
|
|
|
|
func_init.func_flgs = flags;
|
|
func_init.pf_id = SC_FUNC(sc);
|
|
func_init.func_id = SC_FUNC(sc);
|
|
func_init.spq_map = sc->spq_dma.paddr;
|
|
func_init.spq_prod = sc->spq_prod_idx;
|
|
|
|
bxe_func_init(sc, &func_init);
|
|
|
|
memset(&sc->cmng, 0, sizeof(struct cmng_struct_per_port));
|
|
|
|
/*
|
|
* Congestion management values depend on the link rate.
|
|
* There is no active link so initial link rate is set to 10Gbps.
|
|
* When the link comes up the congestion management values are
|
|
* re-calculated according to the actual link rate.
|
|
*/
|
|
sc->link_vars.line_speed = SPEED_10000;
|
|
bxe_cmng_fns_init(sc, TRUE, bxe_get_cmng_fns_mode(sc));
|
|
|
|
/* Only the PMF sets the HW */
|
|
if (sc->port.pmf) {
|
|
storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
|
|
}
|
|
|
|
/* init Event Queue - PCI bus guarantees correct endainity */
|
|
eq_data.base_addr.hi = U64_HI(sc->eq_dma.paddr);
|
|
eq_data.base_addr.lo = U64_LO(sc->eq_dma.paddr);
|
|
eq_data.producer = sc->eq_prod;
|
|
eq_data.index_id = HC_SP_INDEX_EQ_CONS;
|
|
eq_data.sb_id = DEF_SB_ID;
|
|
storm_memset_eq_data(sc, &eq_data, SC_FUNC(sc));
|
|
}
|
|
|
|
static void
|
|
bxe_hc_int_enable(struct bxe_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t addr = (port) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
|
|
uint32_t val = REG_RD(sc, addr);
|
|
uint8_t msix = (sc->interrupt_mode == INTR_MODE_MSIX) ? TRUE : FALSE;
|
|
uint8_t single_msix = ((sc->interrupt_mode == INTR_MODE_MSIX) &&
|
|
(sc->intr_count == 1)) ? TRUE : FALSE;
|
|
uint8_t msi = (sc->interrupt_mode == INTR_MODE_MSI) ? TRUE : FALSE;
|
|
|
|
if (msix) {
|
|
val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
|
|
HC_CONFIG_0_REG_INT_LINE_EN_0);
|
|
val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
|
|
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
|
|
if (single_msix) {
|
|
val |= HC_CONFIG_0_REG_SINGLE_ISR_EN_0;
|
|
}
|
|
} else if (msi) {
|
|
val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0;
|
|
val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
|
|
HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
|
|
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
|
|
} else {
|
|
val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
|
|
HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
|
|
HC_CONFIG_0_REG_INT_LINE_EN_0 |
|
|
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
|
|
|
|
if (!CHIP_IS_E1(sc)) {
|
|
BLOGD(sc, DBG_INTR, "write %x to HC %d (addr 0x%x)\n",
|
|
val, port, addr);
|
|
|
|
REG_WR(sc, addr, val);
|
|
|
|
val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0;
|
|
}
|
|
}
|
|
|
|
if (CHIP_IS_E1(sc)) {
|
|
REG_WR(sc, (HC_REG_INT_MASK + port*4), 0x1FFFF);
|
|
}
|
|
|
|
BLOGD(sc, DBG_INTR, "write %x to HC %d (addr 0x%x) mode %s\n",
|
|
val, port, addr, ((msix) ? "MSI-X" : ((msi) ? "MSI" : "INTx")));
|
|
|
|
REG_WR(sc, addr, val);
|
|
|
|
/* ensure that HC_CONFIG is written before leading/trailing edge config */
|
|
mb();
|
|
|
|
if (!CHIP_IS_E1(sc)) {
|
|
/* init leading/trailing edge */
|
|
if (IS_MF(sc)) {
|
|
val = (0xee0f | (1 << (SC_VN(sc) + 4)));
|
|
if (sc->port.pmf) {
|
|
/* enable nig and gpio3 attention */
|
|
val |= 0x1100;
|
|
}
|
|
} else {
|
|
val = 0xffff;
|
|
}
|
|
|
|
REG_WR(sc, (HC_REG_TRAILING_EDGE_0 + port*8), val);
|
|
REG_WR(sc, (HC_REG_LEADING_EDGE_0 + port*8), val);
|
|
}
|
|
|
|
/* make sure that interrupts are indeed enabled from here on */
|
|
mb();
|
|
}
|
|
|
|
static void
|
|
bxe_igu_int_enable(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
uint8_t msix = (sc->interrupt_mode == INTR_MODE_MSIX) ? TRUE : FALSE;
|
|
uint8_t single_msix = ((sc->interrupt_mode == INTR_MODE_MSIX) &&
|
|
(sc->intr_count == 1)) ? TRUE : FALSE;
|
|
uint8_t msi = (sc->interrupt_mode == INTR_MODE_MSI) ? TRUE : FALSE;
|
|
|
|
val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
|
|
|
|
if (msix) {
|
|
val &= ~(IGU_PF_CONF_INT_LINE_EN |
|
|
IGU_PF_CONF_SINGLE_ISR_EN);
|
|
val |= (IGU_PF_CONF_MSI_MSIX_EN |
|
|
IGU_PF_CONF_ATTN_BIT_EN);
|
|
if (single_msix) {
|
|
val |= IGU_PF_CONF_SINGLE_ISR_EN;
|
|
}
|
|
} else if (msi) {
|
|
val &= ~IGU_PF_CONF_INT_LINE_EN;
|
|
val |= (IGU_PF_CONF_MSI_MSIX_EN |
|
|
IGU_PF_CONF_ATTN_BIT_EN |
|
|
IGU_PF_CONF_SINGLE_ISR_EN);
|
|
} else {
|
|
val &= ~IGU_PF_CONF_MSI_MSIX_EN;
|
|
val |= (IGU_PF_CONF_INT_LINE_EN |
|
|
IGU_PF_CONF_ATTN_BIT_EN |
|
|
IGU_PF_CONF_SINGLE_ISR_EN);
|
|
}
|
|
|
|
/* clean previous status - need to configure igu prior to ack*/
|
|
if ((!msix) || single_msix) {
|
|
REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
|
|
bxe_ack_int(sc);
|
|
}
|
|
|
|
val |= IGU_PF_CONF_FUNC_EN;
|
|
|
|
BLOGD(sc, DBG_INTR, "write 0x%x to IGU mode %s\n",
|
|
val, ((msix) ? "MSI-X" : ((msi) ? "MSI" : "INTx")));
|
|
|
|
REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
|
|
|
|
mb();
|
|
|
|
/* init leading/trailing edge */
|
|
if (IS_MF(sc)) {
|
|
val = (0xee0f | (1 << (SC_VN(sc) + 4)));
|
|
if (sc->port.pmf) {
|
|
/* enable nig and gpio3 attention */
|
|
val |= 0x1100;
|
|
}
|
|
} else {
|
|
val = 0xffff;
|
|
}
|
|
|
|
REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, val);
|
|
REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, val);
|
|
|
|
/* make sure that interrupts are indeed enabled from here on */
|
|
mb();
|
|
}
|
|
|
|
static void
|
|
bxe_int_enable(struct bxe_softc *sc)
|
|
{
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
bxe_hc_int_enable(sc);
|
|
} else {
|
|
bxe_igu_int_enable(sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_hc_int_disable(struct bxe_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t addr = (port) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
|
|
uint32_t val = REG_RD(sc, addr);
|
|
|
|
/*
|
|
* In E1 we must use only PCI configuration space to disable MSI/MSIX
|
|
* capablility. It's forbidden to disable IGU_PF_CONF_MSI_MSIX_EN in HC
|
|
* block
|
|
*/
|
|
if (CHIP_IS_E1(sc)) {
|
|
/*
|
|
* Since IGU_PF_CONF_MSI_MSIX_EN still always on use mask register
|
|
* to prevent from HC sending interrupts after we exit the function
|
|
*/
|
|
REG_WR(sc, (HC_REG_INT_MASK + port*4), 0);
|
|
|
|
val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
|
|
HC_CONFIG_0_REG_INT_LINE_EN_0 |
|
|
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
|
|
} else {
|
|
val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
|
|
HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
|
|
HC_CONFIG_0_REG_INT_LINE_EN_0 |
|
|
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
|
|
}
|
|
|
|
BLOGD(sc, DBG_INTR, "write %x to HC %d (addr 0x%x)\n", val, port, addr);
|
|
|
|
/* flush all outstanding writes */
|
|
mb();
|
|
|
|
REG_WR(sc, addr, val);
|
|
if (REG_RD(sc, addr) != val) {
|
|
BLOGE(sc, "proper val not read from HC IGU!\n");
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_igu_int_disable(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
|
|
|
|
val &= ~(IGU_PF_CONF_MSI_MSIX_EN |
|
|
IGU_PF_CONF_INT_LINE_EN |
|
|
IGU_PF_CONF_ATTN_BIT_EN);
|
|
|
|
BLOGD(sc, DBG_INTR, "write %x to IGU\n", val);
|
|
|
|
/* flush all outstanding writes */
|
|
mb();
|
|
|
|
REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
|
|
if (REG_RD(sc, IGU_REG_PF_CONFIGURATION) != val) {
|
|
BLOGE(sc, "proper val not read from IGU!\n");
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_int_disable(struct bxe_softc *sc)
|
|
{
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
bxe_hc_int_disable(sc);
|
|
} else {
|
|
bxe_igu_int_disable(sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_nic_init(struct bxe_softc *sc,
|
|
int load_code)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
bxe_init_eth_fp(sc, i);
|
|
}
|
|
|
|
rmb(); /* ensure status block indices were read */
|
|
|
|
bxe_init_rx_rings(sc);
|
|
bxe_init_tx_rings(sc);
|
|
|
|
if (IS_VF(sc)) {
|
|
return;
|
|
}
|
|
|
|
/* initialize MOD_ABS interrupts */
|
|
elink_init_mod_abs_int(sc, &sc->link_vars,
|
|
sc->devinfo.chip_id,
|
|
sc->devinfo.shmem_base,
|
|
sc->devinfo.shmem2_base,
|
|
SC_PORT(sc));
|
|
|
|
bxe_init_def_sb(sc);
|
|
bxe_update_dsb_idx(sc);
|
|
bxe_init_sp_ring(sc);
|
|
bxe_init_eq_ring(sc);
|
|
bxe_init_internal(sc, load_code);
|
|
bxe_pf_init(sc);
|
|
bxe_stats_init(sc);
|
|
|
|
/* flush all before enabling interrupts */
|
|
mb();
|
|
|
|
bxe_int_enable(sc);
|
|
|
|
/* check for SPIO5 */
|
|
bxe_attn_int_deasserted0(sc,
|
|
REG_RD(sc,
|
|
(MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 +
|
|
SC_PORT(sc)*4)) &
|
|
AEU_INPUTS_ATTN_BITS_SPIO5);
|
|
}
|
|
|
|
static inline void
|
|
bxe_init_objs(struct bxe_softc *sc)
|
|
{
|
|
/* mcast rules must be added to tx if tx switching is enabled */
|
|
ecore_obj_type o_type =
|
|
(sc->flags & BXE_TX_SWITCHING) ? ECORE_OBJ_TYPE_RX_TX :
|
|
ECORE_OBJ_TYPE_RX;
|
|
|
|
/* RX_MODE controlling object */
|
|
ecore_init_rx_mode_obj(sc, &sc->rx_mode_obj);
|
|
|
|
/* multicast configuration controlling object */
|
|
ecore_init_mcast_obj(sc,
|
|
&sc->mcast_obj,
|
|
sc->fp[0].cl_id,
|
|
sc->fp[0].index,
|
|
SC_FUNC(sc),
|
|
SC_FUNC(sc),
|
|
BXE_SP(sc, mcast_rdata),
|
|
BXE_SP_MAPPING(sc, mcast_rdata),
|
|
ECORE_FILTER_MCAST_PENDING,
|
|
&sc->sp_state,
|
|
o_type);
|
|
|
|
/* Setup CAM credit pools */
|
|
ecore_init_mac_credit_pool(sc,
|
|
&sc->macs_pool,
|
|
SC_FUNC(sc),
|
|
CHIP_IS_E1x(sc) ? VNICS_PER_PORT(sc) :
|
|
VNICS_PER_PATH(sc));
|
|
|
|
ecore_init_vlan_credit_pool(sc,
|
|
&sc->vlans_pool,
|
|
SC_ABS_FUNC(sc) >> 1,
|
|
CHIP_IS_E1x(sc) ? VNICS_PER_PORT(sc) :
|
|
VNICS_PER_PATH(sc));
|
|
|
|
/* RSS configuration object */
|
|
ecore_init_rss_config_obj(sc,
|
|
&sc->rss_conf_obj,
|
|
sc->fp[0].cl_id,
|
|
sc->fp[0].index,
|
|
SC_FUNC(sc),
|
|
SC_FUNC(sc),
|
|
BXE_SP(sc, rss_rdata),
|
|
BXE_SP_MAPPING(sc, rss_rdata),
|
|
ECORE_FILTER_RSS_CONF_PENDING,
|
|
&sc->sp_state, ECORE_OBJ_TYPE_RX);
|
|
}
|
|
|
|
/*
|
|
* Initialize the function. This must be called before sending CLIENT_SETUP
|
|
* for the first client.
|
|
*/
|
|
static inline int
|
|
bxe_func_start(struct bxe_softc *sc)
|
|
{
|
|
struct ecore_func_state_params func_params = { NULL };
|
|
struct ecore_func_start_params *start_params = &func_params.params.start;
|
|
|
|
/* Prepare parameters for function state transitions */
|
|
bit_set(&func_params.ramrod_flags, RAMROD_COMP_WAIT);
|
|
|
|
func_params.f_obj = &sc->func_obj;
|
|
func_params.cmd = ECORE_F_CMD_START;
|
|
|
|
/* Function parameters */
|
|
start_params->mf_mode = sc->devinfo.mf_info.mf_mode;
|
|
start_params->sd_vlan_tag = OVLAN(sc);
|
|
|
|
if (CHIP_IS_E2(sc) || CHIP_IS_E3(sc)) {
|
|
start_params->network_cos_mode = STATIC_COS;
|
|
} else { /* CHIP_IS_E1X */
|
|
start_params->network_cos_mode = FW_WRR;
|
|
}
|
|
|
|
start_params->gre_tunnel_mode = 0;
|
|
start_params->gre_tunnel_rss = 0;
|
|
|
|
return (ecore_func_state_change(sc, &func_params));
|
|
}
|
|
|
|
static int
|
|
bxe_set_power_state(struct bxe_softc *sc,
|
|
uint8_t state)
|
|
{
|
|
uint16_t pmcsr;
|
|
|
|
/* If there is no power capability, silently succeed */
|
|
if (!(sc->devinfo.pcie_cap_flags & BXE_PM_CAPABLE_FLAG)) {
|
|
BLOGW(sc, "No power capability\n");
|
|
return (0);
|
|
}
|
|
|
|
pmcsr = pci_read_config(sc->dev,
|
|
(sc->devinfo.pcie_pm_cap_reg + PCIR_POWER_STATUS),
|
|
2);
|
|
|
|
switch (state) {
|
|
case PCI_PM_D0:
|
|
pci_write_config(sc->dev,
|
|
(sc->devinfo.pcie_pm_cap_reg + PCIR_POWER_STATUS),
|
|
((pmcsr & ~PCIM_PSTAT_DMASK) | PCIM_PSTAT_PME), 2);
|
|
|
|
if (pmcsr & PCIM_PSTAT_DMASK) {
|
|
/* delay required during transition out of D3hot */
|
|
DELAY(20000);
|
|
}
|
|
|
|
break;
|
|
|
|
case PCI_PM_D3hot:
|
|
/* XXX if there are other clients above don't shut down the power */
|
|
|
|
/* don't shut down the power for emulation and FPGA */
|
|
if (CHIP_REV_IS_SLOW(sc)) {
|
|
return (0);
|
|
}
|
|
|
|
pmcsr &= ~PCIM_PSTAT_DMASK;
|
|
pmcsr |= PCIM_PSTAT_D3;
|
|
|
|
if (sc->wol) {
|
|
pmcsr |= PCIM_PSTAT_PMEENABLE;
|
|
}
|
|
|
|
pci_write_config(sc->dev,
|
|
(sc->devinfo.pcie_pm_cap_reg + PCIR_POWER_STATUS),
|
|
pmcsr, 4);
|
|
|
|
/*
|
|
* No more memory access after this point until device is brought back
|
|
* to D0 state.
|
|
*/
|
|
break;
|
|
|
|
default:
|
|
BLOGE(sc, "Can't support PCI power state = %d\n", state);
|
|
return (-1);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
/* return true if succeeded to acquire the lock */
|
|
static uint8_t
|
|
bxe_trylock_hw_lock(struct bxe_softc *sc,
|
|
uint32_t resource)
|
|
{
|
|
uint32_t lock_status;
|
|
uint32_t resource_bit = (1 << resource);
|
|
int func = SC_FUNC(sc);
|
|
uint32_t hw_lock_control_reg;
|
|
|
|
BLOGD(sc, DBG_LOAD, "Trying to take a resource lock 0x%x\n", resource);
|
|
|
|
/* Validating that the resource is within range */
|
|
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
|
|
BLOGD(sc, DBG_LOAD,
|
|
"resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
|
|
resource, HW_LOCK_MAX_RESOURCE_VALUE);
|
|
return (FALSE);
|
|
}
|
|
|
|
if (func <= 5) {
|
|
hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
|
|
} else {
|
|
hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
|
|
}
|
|
|
|
/* try to acquire the lock */
|
|
REG_WR(sc, hw_lock_control_reg + 4, resource_bit);
|
|
lock_status = REG_RD(sc, hw_lock_control_reg);
|
|
if (lock_status & resource_bit) {
|
|
return (TRUE);
|
|
}
|
|
|
|
BLOGE(sc, "Failed to get a resource lock 0x%x\n", resource);
|
|
|
|
return (FALSE);
|
|
}
|
|
|
|
/*
|
|
* Get the recovery leader resource id according to the engine this function
|
|
* belongs to. Currently only only 2 engines is supported.
|
|
*/
|
|
static int
|
|
bxe_get_leader_lock_resource(struct bxe_softc *sc)
|
|
{
|
|
if (SC_PATH(sc)) {
|
|
return (HW_LOCK_RESOURCE_RECOVERY_LEADER_1);
|
|
} else {
|
|
return (HW_LOCK_RESOURCE_RECOVERY_LEADER_0);
|
|
}
|
|
}
|
|
|
|
/* try to acquire a leader lock for current engine */
|
|
static uint8_t
|
|
bxe_trylock_leader_lock(struct bxe_softc *sc)
|
|
{
|
|
return (bxe_trylock_hw_lock(sc, bxe_get_leader_lock_resource(sc)));
|
|
}
|
|
|
|
static int
|
|
bxe_release_leader_lock(struct bxe_softc *sc)
|
|
{
|
|
return (bxe_release_hw_lock(sc, bxe_get_leader_lock_resource(sc)));
|
|
}
|
|
|
|
/* close gates #2, #3 and #4 */
|
|
static void
|
|
bxe_set_234_gates(struct bxe_softc *sc,
|
|
uint8_t close)
|
|
{
|
|
uint32_t val;
|
|
|
|
/* gates #2 and #4a are closed/opened for "not E1" only */
|
|
if (!CHIP_IS_E1(sc)) {
|
|
/* #4 */
|
|
REG_WR(sc, PXP_REG_HST_DISCARD_DOORBELLS, !!close);
|
|
/* #2 */
|
|
REG_WR(sc, PXP_REG_HST_DISCARD_INTERNAL_WRITES, !!close);
|
|
}
|
|
|
|
/* #3 */
|
|
if (CHIP_IS_E1x(sc)) {
|
|
/* prevent interrupts from HC on both ports */
|
|
val = REG_RD(sc, HC_REG_CONFIG_1);
|
|
REG_WR(sc, HC_REG_CONFIG_1,
|
|
(!close) ? (val | HC_CONFIG_1_REG_BLOCK_DISABLE_1) :
|
|
(val & ~(uint32_t)HC_CONFIG_1_REG_BLOCK_DISABLE_1));
|
|
|
|
val = REG_RD(sc, HC_REG_CONFIG_0);
|
|
REG_WR(sc, HC_REG_CONFIG_0,
|
|
(!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) :
|
|
(val & ~(uint32_t)HC_CONFIG_0_REG_BLOCK_DISABLE_0));
|
|
} else {
|
|
/* Prevent incomming interrupts in IGU */
|
|
val = REG_RD(sc, IGU_REG_BLOCK_CONFIGURATION);
|
|
|
|
REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION,
|
|
(!close) ?
|
|
(val | IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE) :
|
|
(val & ~(uint32_t)IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE));
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "%s gates #2, #3 and #4\n",
|
|
close ? "closing" : "opening");
|
|
|
|
wmb();
|
|
}
|
|
|
|
/* poll for pending writes bit, it should get cleared in no more than 1s */
|
|
static int
|
|
bxe_er_poll_igu_vq(struct bxe_softc *sc)
|
|
{
|
|
uint32_t cnt = 1000;
|
|
uint32_t pend_bits = 0;
|
|
|
|
do {
|
|
pend_bits = REG_RD(sc, IGU_REG_PENDING_BITS_STATUS);
|
|
|
|
if (pend_bits == 0) {
|
|
break;
|
|
}
|
|
|
|
DELAY(1000);
|
|
} while (--cnt > 0);
|
|
|
|
if (cnt == 0) {
|
|
BLOGE(sc, "Still pending IGU requests bits=0x%08x!\n", pend_bits);
|
|
return (-1);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
#define SHARED_MF_CLP_MAGIC 0x80000000 /* 'magic' bit */
|
|
|
|
static void
|
|
bxe_clp_reset_prep(struct bxe_softc *sc,
|
|
uint32_t *magic_val)
|
|
{
|
|
/* Do some magic... */
|
|
uint32_t val = MFCFG_RD(sc, shared_mf_config.clp_mb);
|
|
*magic_val = val & SHARED_MF_CLP_MAGIC;
|
|
MFCFG_WR(sc, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC);
|
|
}
|
|
|
|
/* restore the value of the 'magic' bit */
|
|
static void
|
|
bxe_clp_reset_done(struct bxe_softc *sc,
|
|
uint32_t magic_val)
|
|
{
|
|
/* Restore the 'magic' bit value... */
|
|
uint32_t val = MFCFG_RD(sc, shared_mf_config.clp_mb);
|
|
MFCFG_WR(sc, shared_mf_config.clp_mb,
|
|
(val & (~SHARED_MF_CLP_MAGIC)) | magic_val);
|
|
}
|
|
|
|
/* prepare for MCP reset, takes care of CLP configurations */
|
|
static void
|
|
bxe_reset_mcp_prep(struct bxe_softc *sc,
|
|
uint32_t *magic_val)
|
|
{
|
|
uint32_t shmem;
|
|
uint32_t validity_offset;
|
|
|
|
/* set `magic' bit in order to save MF config */
|
|
if (!CHIP_IS_E1(sc)) {
|
|
bxe_clp_reset_prep(sc, magic_val);
|
|
}
|
|
|
|
/* get shmem offset */
|
|
shmem = REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
|
|
validity_offset =
|
|
offsetof(struct shmem_region, validity_map[SC_PORT(sc)]);
|
|
|
|
/* Clear validity map flags */
|
|
if (shmem > 0) {
|
|
REG_WR(sc, shmem + validity_offset, 0);
|
|
}
|
|
}
|
|
|
|
#define MCP_TIMEOUT 5000 /* 5 seconds (in ms) */
|
|
#define MCP_ONE_TIMEOUT 100 /* 100 ms */
|
|
|
|
static void
|
|
bxe_mcp_wait_one(struct bxe_softc *sc)
|
|
{
|
|
/* special handling for emulation and FPGA (10 times longer) */
|
|
if (CHIP_REV_IS_SLOW(sc)) {
|
|
DELAY((MCP_ONE_TIMEOUT*10) * 1000);
|
|
} else {
|
|
DELAY((MCP_ONE_TIMEOUT) * 1000);
|
|
}
|
|
}
|
|
|
|
/* initialize shmem_base and waits for validity signature to appear */
|
|
static int
|
|
bxe_init_shmem(struct bxe_softc *sc)
|
|
{
|
|
int cnt = 0;
|
|
uint32_t val = 0;
|
|
|
|
do {
|
|
sc->devinfo.shmem_base =
|
|
sc->link_params.shmem_base =
|
|
REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
|
|
|
|
if (sc->devinfo.shmem_base) {
|
|
val = SHMEM_RD(sc, validity_map[SC_PORT(sc)]);
|
|
if (val & SHR_MEM_VALIDITY_MB)
|
|
return (0);
|
|
}
|
|
|
|
bxe_mcp_wait_one(sc);
|
|
|
|
} while (cnt++ < (MCP_TIMEOUT / MCP_ONE_TIMEOUT));
|
|
|
|
BLOGE(sc, "BAD MCP validity signature\n");
|
|
|
|
return (-1);
|
|
}
|
|
|
|
static int
|
|
bxe_reset_mcp_comp(struct bxe_softc *sc,
|
|
uint32_t magic_val)
|
|
{
|
|
int rc = bxe_init_shmem(sc);
|
|
|
|
/* Restore the `magic' bit value */
|
|
if (!CHIP_IS_E1(sc)) {
|
|
bxe_clp_reset_done(sc, magic_val);
|
|
}
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static void
|
|
bxe_pxp_prep(struct bxe_softc *sc)
|
|
{
|
|
if (!CHIP_IS_E1(sc)) {
|
|
REG_WR(sc, PXP2_REG_RD_START_INIT, 0);
|
|
REG_WR(sc, PXP2_REG_RQ_RBC_DONE, 0);
|
|
wmb();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Reset the whole chip except for:
|
|
* - PCIE core
|
|
* - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by one reset bit)
|
|
* - IGU
|
|
* - MISC (including AEU)
|
|
* - GRC
|
|
* - RBCN, RBCP
|
|
*/
|
|
static void
|
|
bxe_process_kill_chip_reset(struct bxe_softc *sc,
|
|
uint8_t global)
|
|
{
|
|
uint32_t not_reset_mask1, reset_mask1, not_reset_mask2, reset_mask2;
|
|
uint32_t global_bits2, stay_reset2;
|
|
|
|
/*
|
|
* Bits that have to be set in reset_mask2 if we want to reset 'global'
|
|
* (per chip) blocks.
|
|
*/
|
|
global_bits2 =
|
|
MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU |
|
|
MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE;
|
|
|
|
/*
|
|
* Don't reset the following blocks.
|
|
* Important: per port blocks (such as EMAC, BMAC, UMAC) can't be
|
|
* reset, as in 4 port device they might still be owned
|
|
* by the MCP (there is only one leader per path).
|
|
*/
|
|
not_reset_mask1 =
|
|
MISC_REGISTERS_RESET_REG_1_RST_HC |
|
|
MISC_REGISTERS_RESET_REG_1_RST_PXPV |
|
|
MISC_REGISTERS_RESET_REG_1_RST_PXP;
|
|
|
|
not_reset_mask2 =
|
|
MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO |
|
|
MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE |
|
|
MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE |
|
|
MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE |
|
|
MISC_REGISTERS_RESET_REG_2_RST_RBCN |
|
|
MISC_REGISTERS_RESET_REG_2_RST_GRC |
|
|
MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE |
|
|
MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B |
|
|
MISC_REGISTERS_RESET_REG_2_RST_ATC |
|
|
MISC_REGISTERS_RESET_REG_2_PGLC |
|
|
MISC_REGISTERS_RESET_REG_2_RST_BMAC0 |
|
|
MISC_REGISTERS_RESET_REG_2_RST_BMAC1 |
|
|
MISC_REGISTERS_RESET_REG_2_RST_EMAC0 |
|
|
MISC_REGISTERS_RESET_REG_2_RST_EMAC1 |
|
|
MISC_REGISTERS_RESET_REG_2_UMAC0 |
|
|
MISC_REGISTERS_RESET_REG_2_UMAC1;
|
|
|
|
/*
|
|
* Keep the following blocks in reset:
|
|
* - all xxMACs are handled by the elink code.
|
|
*/
|
|
stay_reset2 =
|
|
MISC_REGISTERS_RESET_REG_2_XMAC |
|
|
MISC_REGISTERS_RESET_REG_2_XMAC_SOFT;
|
|
|
|
/* Full reset masks according to the chip */
|
|
reset_mask1 = 0xffffffff;
|
|
|
|
if (CHIP_IS_E1(sc))
|
|
reset_mask2 = 0xffff;
|
|
else if (CHIP_IS_E1H(sc))
|
|
reset_mask2 = 0x1ffff;
|
|
else if (CHIP_IS_E2(sc))
|
|
reset_mask2 = 0xfffff;
|
|
else /* CHIP_IS_E3 */
|
|
reset_mask2 = 0x3ffffff;
|
|
|
|
/* Don't reset global blocks unless we need to */
|
|
if (!global)
|
|
reset_mask2 &= ~global_bits2;
|
|
|
|
/*
|
|
* In case of attention in the QM, we need to reset PXP
|
|
* (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM
|
|
* because otherwise QM reset would release 'close the gates' shortly
|
|
* before resetting the PXP, then the PSWRQ would send a write
|
|
* request to PGLUE. Then when PXP is reset, PGLUE would try to
|
|
* read the payload data from PSWWR, but PSWWR would not
|
|
* respond. The write queue in PGLUE would stuck, dmae commands
|
|
* would not return. Therefore it's important to reset the second
|
|
* reset register (containing the
|
|
* MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the
|
|
* first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM
|
|
* bit).
|
|
*/
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
|
|
reset_mask2 & (~not_reset_mask2));
|
|
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
|
|
reset_mask1 & (~not_reset_mask1));
|
|
|
|
mb();
|
|
wmb();
|
|
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
|
|
reset_mask2 & (~stay_reset2));
|
|
|
|
mb();
|
|
wmb();
|
|
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1);
|
|
wmb();
|
|
}
|
|
|
|
static int
|
|
bxe_process_kill(struct bxe_softc *sc,
|
|
uint8_t global)
|
|
{
|
|
int cnt = 1000;
|
|
uint32_t val = 0;
|
|
uint32_t sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2;
|
|
uint32_t tags_63_32 = 0;
|
|
|
|
/* Empty the Tetris buffer, wait for 1s */
|
|
do {
|
|
sr_cnt = REG_RD(sc, PXP2_REG_RD_SR_CNT);
|
|
blk_cnt = REG_RD(sc, PXP2_REG_RD_BLK_CNT);
|
|
port_is_idle_0 = REG_RD(sc, PXP2_REG_RD_PORT_IS_IDLE_0);
|
|
port_is_idle_1 = REG_RD(sc, PXP2_REG_RD_PORT_IS_IDLE_1);
|
|
pgl_exp_rom2 = REG_RD(sc, PXP2_REG_PGL_EXP_ROM2);
|
|
if (CHIP_IS_E3(sc)) {
|
|
tags_63_32 = REG_RD(sc, PGLUE_B_REG_TAGS_63_32);
|
|
}
|
|
|
|
if ((sr_cnt == 0x7e) && (blk_cnt == 0xa0) &&
|
|
((port_is_idle_0 & 0x1) == 0x1) &&
|
|
((port_is_idle_1 & 0x1) == 0x1) &&
|
|
(pgl_exp_rom2 == 0xffffffff) &&
|
|
(!CHIP_IS_E3(sc) || (tags_63_32 == 0xffffffff)))
|
|
break;
|
|
DELAY(1000);
|
|
} while (cnt-- > 0);
|
|
|
|
if (cnt <= 0) {
|
|
BLOGE(sc, "ERROR: Tetris buffer didn't get empty or there "
|
|
"are still outstanding read requests after 1s! "
|
|
"sr_cnt=0x%08x, blk_cnt=0x%08x, port_is_idle_0=0x%08x, "
|
|
"port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x\n",
|
|
sr_cnt, blk_cnt, port_is_idle_0,
|
|
port_is_idle_1, pgl_exp_rom2);
|
|
return (-1);
|
|
}
|
|
|
|
mb();
|
|
|
|
/* Close gates #2, #3 and #4 */
|
|
bxe_set_234_gates(sc, TRUE);
|
|
|
|
/* Poll for IGU VQs for 57712 and newer chips */
|
|
if (!CHIP_IS_E1x(sc) && bxe_er_poll_igu_vq(sc)) {
|
|
return (-1);
|
|
}
|
|
|
|
/* XXX indicate that "process kill" is in progress to MCP */
|
|
|
|
/* clear "unprepared" bit */
|
|
REG_WR(sc, MISC_REG_UNPREPARED, 0);
|
|
mb();
|
|
|
|
/* Make sure all is written to the chip before the reset */
|
|
wmb();
|
|
|
|
/*
|
|
* Wait for 1ms to empty GLUE and PCI-E core queues,
|
|
* PSWHST, GRC and PSWRD Tetris buffer.
|
|
*/
|
|
DELAY(1000);
|
|
|
|
/* Prepare to chip reset: */
|
|
/* MCP */
|
|
if (global) {
|
|
bxe_reset_mcp_prep(sc, &val);
|
|
}
|
|
|
|
/* PXP */
|
|
bxe_pxp_prep(sc);
|
|
mb();
|
|
|
|
/* reset the chip */
|
|
bxe_process_kill_chip_reset(sc, global);
|
|
mb();
|
|
|
|
/* Recover after reset: */
|
|
/* MCP */
|
|
if (global && bxe_reset_mcp_comp(sc, val)) {
|
|
return (-1);
|
|
}
|
|
|
|
/* XXX add resetting the NO_MCP mode DB here */
|
|
|
|
/* Open the gates #2, #3 and #4 */
|
|
bxe_set_234_gates(sc, FALSE);
|
|
|
|
/* XXX
|
|
* IGU/AEU preparation bring back the AEU/IGU to a reset state
|
|
* re-enable attentions
|
|
*/
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bxe_leader_reset(struct bxe_softc *sc)
|
|
{
|
|
int rc = 0;
|
|
uint8_t global = bxe_reset_is_global(sc);
|
|
uint32_t load_code;
|
|
|
|
/*
|
|
* If not going to reset MCP, load "fake" driver to reset HW while
|
|
* driver is owner of the HW.
|
|
*/
|
|
if (!global && !BXE_NOMCP(sc)) {
|
|
load_code = bxe_fw_command(sc, DRV_MSG_CODE_LOAD_REQ,
|
|
DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
|
|
if (!load_code) {
|
|
BLOGE(sc, "MCP response failure, aborting\n");
|
|
rc = -1;
|
|
goto exit_leader_reset;
|
|
}
|
|
|
|
if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) &&
|
|
(load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) {
|
|
BLOGE(sc, "MCP unexpected response, aborting\n");
|
|
rc = -1;
|
|
goto exit_leader_reset2;
|
|
}
|
|
|
|
load_code = bxe_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
|
|
if (!load_code) {
|
|
BLOGE(sc, "MCP response failure, aborting\n");
|
|
rc = -1;
|
|
goto exit_leader_reset2;
|
|
}
|
|
}
|
|
|
|
/* try to recover after the failure */
|
|
if (bxe_process_kill(sc, global)) {
|
|
BLOGE(sc, "Something bad occurred on engine %d!\n", SC_PATH(sc));
|
|
rc = -1;
|
|
goto exit_leader_reset2;
|
|
}
|
|
|
|
/*
|
|
* Clear the RESET_IN_PROGRESS and RESET_GLOBAL bits and update the driver
|
|
* state.
|
|
*/
|
|
bxe_set_reset_done(sc);
|
|
if (global) {
|
|
bxe_clear_reset_global(sc);
|
|
}
|
|
|
|
exit_leader_reset2:
|
|
|
|
/* unload "fake driver" if it was loaded */
|
|
if (!global && !BXE_NOMCP(sc)) {
|
|
bxe_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
|
|
bxe_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, 0);
|
|
}
|
|
|
|
exit_leader_reset:
|
|
|
|
sc->is_leader = 0;
|
|
bxe_release_leader_lock(sc);
|
|
|
|
mb();
|
|
return (rc);
|
|
}
|
|
|
|
/*
|
|
* prepare INIT transition, parameters configured:
|
|
* - HC configuration
|
|
* - Queue's CDU context
|
|
*/
|
|
static void
|
|
bxe_pf_q_prep_init(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp,
|
|
struct ecore_queue_init_params *init_params)
|
|
{
|
|
uint8_t cos;
|
|
int cxt_index, cxt_offset;
|
|
|
|
bxe_set_bit(ECORE_Q_FLG_HC, &init_params->rx.flags);
|
|
bxe_set_bit(ECORE_Q_FLG_HC, &init_params->tx.flags);
|
|
|
|
bxe_set_bit(ECORE_Q_FLG_HC_EN, &init_params->rx.flags);
|
|
bxe_set_bit(ECORE_Q_FLG_HC_EN, &init_params->tx.flags);
|
|
|
|
/* HC rate */
|
|
init_params->rx.hc_rate =
|
|
sc->hc_rx_ticks ? (1000000 / sc->hc_rx_ticks) : 0;
|
|
init_params->tx.hc_rate =
|
|
sc->hc_tx_ticks ? (1000000 / sc->hc_tx_ticks) : 0;
|
|
|
|
/* FW SB ID */
|
|
init_params->rx.fw_sb_id = init_params->tx.fw_sb_id = fp->fw_sb_id;
|
|
|
|
/* CQ index among the SB indices */
|
|
init_params->rx.sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
|
|
init_params->tx.sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS;
|
|
|
|
/* set maximum number of COSs supported by this queue */
|
|
init_params->max_cos = sc->max_cos;
|
|
|
|
BLOGD(sc, DBG_LOAD, "fp %d setting queue params max cos to %d\n",
|
|
fp->index, init_params->max_cos);
|
|
|
|
/* set the context pointers queue object */
|
|
for (cos = FIRST_TX_COS_INDEX; cos < init_params->max_cos; cos++) {
|
|
/* XXX change index/cid here if ever support multiple tx CoS */
|
|
/* fp->txdata[cos]->cid */
|
|
cxt_index = fp->index / ILT_PAGE_CIDS;
|
|
cxt_offset = fp->index - (cxt_index * ILT_PAGE_CIDS);
|
|
init_params->cxts[cos] = &sc->context[cxt_index].vcxt[cxt_offset].eth;
|
|
}
|
|
}
|
|
|
|
/* set flags that are common for the Tx-only and not normal connections */
|
|
static unsigned long
|
|
bxe_get_common_flags(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp,
|
|
uint8_t zero_stats)
|
|
{
|
|
unsigned long flags = 0;
|
|
|
|
/* PF driver will always initialize the Queue to an ACTIVE state */
|
|
bxe_set_bit(ECORE_Q_FLG_ACTIVE, &flags);
|
|
|
|
/*
|
|
* tx only connections collect statistics (on the same index as the
|
|
* parent connection). The statistics are zeroed when the parent
|
|
* connection is initialized.
|
|
*/
|
|
|
|
bxe_set_bit(ECORE_Q_FLG_STATS, &flags);
|
|
if (zero_stats) {
|
|
bxe_set_bit(ECORE_Q_FLG_ZERO_STATS, &flags);
|
|
}
|
|
|
|
/*
|
|
* tx only connections can support tx-switching, though their
|
|
* CoS-ness doesn't survive the loopback
|
|
*/
|
|
if (sc->flags & BXE_TX_SWITCHING) {
|
|
bxe_set_bit(ECORE_Q_FLG_TX_SWITCH, &flags);
|
|
}
|
|
|
|
bxe_set_bit(ECORE_Q_FLG_PCSUM_ON_PKT, &flags);
|
|
|
|
return (flags);
|
|
}
|
|
|
|
static unsigned long
|
|
bxe_get_q_flags(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp,
|
|
uint8_t leading)
|
|
{
|
|
unsigned long flags = 0;
|
|
|
|
if (IS_MF_SD(sc)) {
|
|
bxe_set_bit(ECORE_Q_FLG_OV, &flags);
|
|
}
|
|
|
|
if (if_getcapenable(sc->ifp) & IFCAP_LRO) {
|
|
bxe_set_bit(ECORE_Q_FLG_TPA, &flags);
|
|
bxe_set_bit(ECORE_Q_FLG_TPA_IPV6, &flags);
|
|
#if 0
|
|
if (fp->mode == TPA_MODE_GRO)
|
|
__set_bit(ECORE_Q_FLG_TPA_GRO, &flags);
|
|
#endif
|
|
}
|
|
|
|
if (leading) {
|
|
bxe_set_bit(ECORE_Q_FLG_LEADING_RSS, &flags);
|
|
bxe_set_bit(ECORE_Q_FLG_MCAST, &flags);
|
|
}
|
|
|
|
bxe_set_bit(ECORE_Q_FLG_VLAN, &flags);
|
|
|
|
#if 0
|
|
/* configure silent vlan removal */
|
|
if (IS_MF_AFEX(sc)) {
|
|
bxe_set_bit(ECORE_Q_FLG_SILENT_VLAN_REM, &flags);
|
|
}
|
|
#endif
|
|
|
|
/* merge with common flags */
|
|
return (flags | bxe_get_common_flags(sc, fp, TRUE));
|
|
}
|
|
|
|
static void
|
|
bxe_pf_q_prep_general(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp,
|
|
struct ecore_general_setup_params *gen_init,
|
|
uint8_t cos)
|
|
{
|
|
gen_init->stat_id = bxe_stats_id(fp);
|
|
gen_init->spcl_id = fp->cl_id;
|
|
gen_init->mtu = sc->mtu;
|
|
gen_init->cos = cos;
|
|
}
|
|
|
|
static void
|
|
bxe_pf_rx_q_prep(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp,
|
|
struct rxq_pause_params *pause,
|
|
struct ecore_rxq_setup_params *rxq_init)
|
|
{
|
|
uint8_t max_sge = 0;
|
|
uint16_t sge_sz = 0;
|
|
uint16_t tpa_agg_size = 0;
|
|
|
|
if (if_getcapenable(sc->ifp) & IFCAP_LRO) {
|
|
pause->sge_th_lo = SGE_TH_LO(sc);
|
|
pause->sge_th_hi = SGE_TH_HI(sc);
|
|
|
|
/* validate SGE ring has enough to cross high threshold */
|
|
if (sc->dropless_fc &&
|
|
(pause->sge_th_hi + FW_PREFETCH_CNT) >
|
|
(RX_SGE_USABLE_PER_PAGE * RX_SGE_NUM_PAGES)) {
|
|
BLOGW(sc, "sge ring threshold limit\n");
|
|
}
|
|
|
|
/* minimum max_aggregation_size is 2*MTU (two full buffers) */
|
|
tpa_agg_size = (2 * sc->mtu);
|
|
if (tpa_agg_size < sc->max_aggregation_size) {
|
|
tpa_agg_size = sc->max_aggregation_size;
|
|
}
|
|
|
|
max_sge = SGE_PAGE_ALIGN(sc->mtu) >> SGE_PAGE_SHIFT;
|
|
max_sge = ((max_sge + PAGES_PER_SGE - 1) &
|
|
(~(PAGES_PER_SGE - 1))) >> PAGES_PER_SGE_SHIFT;
|
|
sge_sz = (uint16_t)min(SGE_PAGES, 0xffff);
|
|
}
|
|
|
|
/* pause - not for e1 */
|
|
if (!CHIP_IS_E1(sc)) {
|
|
pause->bd_th_lo = BD_TH_LO(sc);
|
|
pause->bd_th_hi = BD_TH_HI(sc);
|
|
|
|
pause->rcq_th_lo = RCQ_TH_LO(sc);
|
|
pause->rcq_th_hi = RCQ_TH_HI(sc);
|
|
|
|
/* validate rings have enough entries to cross high thresholds */
|
|
if (sc->dropless_fc &&
|
|
pause->bd_th_hi + FW_PREFETCH_CNT >
|
|
sc->rx_ring_size) {
|
|
BLOGW(sc, "rx bd ring threshold limit\n");
|
|
}
|
|
|
|
if (sc->dropless_fc &&
|
|
pause->rcq_th_hi + FW_PREFETCH_CNT >
|
|
RCQ_NUM_PAGES * RCQ_USABLE_PER_PAGE) {
|
|
BLOGW(sc, "rcq ring threshold limit\n");
|
|
}
|
|
|
|
pause->pri_map = 1;
|
|
}
|
|
|
|
/* rxq setup */
|
|
rxq_init->dscr_map = fp->rx_dma.paddr;
|
|
rxq_init->sge_map = fp->rx_sge_dma.paddr;
|
|
rxq_init->rcq_map = fp->rcq_dma.paddr;
|
|
rxq_init->rcq_np_map = (fp->rcq_dma.paddr + BCM_PAGE_SIZE);
|
|
|
|
/*
|
|
* This should be a maximum number of data bytes that may be
|
|
* placed on the BD (not including paddings).
|
|
*/
|
|
rxq_init->buf_sz = (fp->rx_buf_size -
|
|
IP_HEADER_ALIGNMENT_PADDING);
|
|
|
|
rxq_init->cl_qzone_id = fp->cl_qzone_id;
|
|
rxq_init->tpa_agg_sz = tpa_agg_size;
|
|
rxq_init->sge_buf_sz = sge_sz;
|
|
rxq_init->max_sges_pkt = max_sge;
|
|
rxq_init->rss_engine_id = SC_FUNC(sc);
|
|
rxq_init->mcast_engine_id = SC_FUNC(sc);
|
|
|
|
/*
|
|
* Maximum number or simultaneous TPA aggregation for this Queue.
|
|
* For PF Clients it should be the maximum available number.
|
|
* VF driver(s) may want to define it to a smaller value.
|
|
*/
|
|
rxq_init->max_tpa_queues = MAX_AGG_QS(sc);
|
|
|
|
rxq_init->cache_line_log = BXE_RX_ALIGN_SHIFT;
|
|
rxq_init->fw_sb_id = fp->fw_sb_id;
|
|
|
|
rxq_init->sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
|
|
|
|
/*
|
|
* configure silent vlan removal
|
|
* if multi function mode is afex, then mask default vlan
|
|
*/
|
|
if (IS_MF_AFEX(sc)) {
|
|
rxq_init->silent_removal_value =
|
|
sc->devinfo.mf_info.afex_def_vlan_tag;
|
|
rxq_init->silent_removal_mask = EVL_VLID_MASK;
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_pf_tx_q_prep(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp,
|
|
struct ecore_txq_setup_params *txq_init,
|
|
uint8_t cos)
|
|
{
|
|
/*
|
|
* XXX If multiple CoS is ever supported then each fastpath structure
|
|
* will need to maintain tx producer/consumer/dma/etc values *per* CoS.
|
|
* fp->txdata[cos]->tx_dma.paddr;
|
|
*/
|
|
txq_init->dscr_map = fp->tx_dma.paddr;
|
|
txq_init->sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS + cos;
|
|
txq_init->traffic_type = LLFC_TRAFFIC_TYPE_NW;
|
|
txq_init->fw_sb_id = fp->fw_sb_id;
|
|
|
|
/*
|
|
* set the TSS leading client id for TX classfication to the
|
|
* leading RSS client id
|
|
*/
|
|
txq_init->tss_leading_cl_id = BXE_FP(sc, 0, cl_id);
|
|
}
|
|
|
|
/*
|
|
* This function performs 2 steps in a queue state machine:
|
|
* 1) RESET->INIT
|
|
* 2) INIT->SETUP
|
|
*/
|
|
static int
|
|
bxe_setup_queue(struct bxe_softc *sc,
|
|
struct bxe_fastpath *fp,
|
|
uint8_t leading)
|
|
{
|
|
struct ecore_queue_state_params q_params = { NULL };
|
|
struct ecore_queue_setup_params *setup_params =
|
|
&q_params.params.setup;
|
|
#if 0
|
|
struct ecore_queue_setup_tx_only_params *tx_only_params =
|
|
&q_params.params.tx_only;
|
|
uint8_t tx_index;
|
|
#endif
|
|
int rc;
|
|
|
|
BLOGD(sc, DBG_LOAD, "setting up queue %d\n", fp->index);
|
|
|
|
bxe_ack_sb(sc, fp->igu_sb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);
|
|
|
|
q_params.q_obj = &BXE_SP_OBJ(sc, fp).q_obj;
|
|
|
|
/* we want to wait for completion in this context */
|
|
bxe_set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
|
|
|
|
/* prepare the INIT parameters */
|
|
bxe_pf_q_prep_init(sc, fp, &q_params.params.init);
|
|
|
|
/* Set the command */
|
|
q_params.cmd = ECORE_Q_CMD_INIT;
|
|
|
|
/* Change the state to INIT */
|
|
rc = ecore_queue_state_change(sc, &q_params);
|
|
if (rc) {
|
|
BLOGE(sc, "Queue(%d) INIT failed\n", fp->index);
|
|
return (rc);
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "init complete\n");
|
|
|
|
/* now move the Queue to the SETUP state */
|
|
memset(setup_params, 0, sizeof(*setup_params));
|
|
|
|
/* set Queue flags */
|
|
setup_params->flags = bxe_get_q_flags(sc, fp, leading);
|
|
|
|
/* set general SETUP parameters */
|
|
bxe_pf_q_prep_general(sc, fp, &setup_params->gen_params,
|
|
FIRST_TX_COS_INDEX);
|
|
|
|
bxe_pf_rx_q_prep(sc, fp,
|
|
&setup_params->pause_params,
|
|
&setup_params->rxq_params);
|
|
|
|
bxe_pf_tx_q_prep(sc, fp,
|
|
&setup_params->txq_params,
|
|
FIRST_TX_COS_INDEX);
|
|
|
|
/* Set the command */
|
|
q_params.cmd = ECORE_Q_CMD_SETUP;
|
|
|
|
/* change the state to SETUP */
|
|
rc = ecore_queue_state_change(sc, &q_params);
|
|
if (rc) {
|
|
BLOGE(sc, "Queue(%d) SETUP failed\n", fp->index);
|
|
return (rc);
|
|
}
|
|
|
|
#if 0
|
|
/* loop through the relevant tx-only indices */
|
|
for (tx_index = FIRST_TX_ONLY_COS_INDEX;
|
|
tx_index < sc->max_cos;
|
|
tx_index++) {
|
|
/* prepare and send tx-only ramrod*/
|
|
rc = bxe_setup_tx_only(sc, fp, &q_params,
|
|
tx_only_params, tx_index, leading);
|
|
if (rc) {
|
|
BLOGE(sc, "Queue(%d.%d) TX_ONLY_SETUP failed\n",
|
|
fp->index, tx_index);
|
|
return (rc);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static int
|
|
bxe_setup_leading(struct bxe_softc *sc)
|
|
{
|
|
return (bxe_setup_queue(sc, &sc->fp[0], TRUE));
|
|
}
|
|
|
|
static int
|
|
bxe_config_rss_pf(struct bxe_softc *sc,
|
|
struct ecore_rss_config_obj *rss_obj,
|
|
uint8_t config_hash)
|
|
{
|
|
struct ecore_config_rss_params params = { NULL };
|
|
int i;
|
|
|
|
/*
|
|
* Although RSS is meaningless when there is a single HW queue we
|
|
* still need it enabled in order to have HW Rx hash generated.
|
|
*/
|
|
|
|
params.rss_obj = rss_obj;
|
|
|
|
bxe_set_bit(RAMROD_COMP_WAIT, ¶ms.ramrod_flags);
|
|
|
|
bxe_set_bit(ECORE_RSS_MODE_REGULAR, ¶ms.rss_flags);
|
|
|
|
/* RSS configuration */
|
|
bxe_set_bit(ECORE_RSS_IPV4, ¶ms.rss_flags);
|
|
bxe_set_bit(ECORE_RSS_IPV4_TCP, ¶ms.rss_flags);
|
|
bxe_set_bit(ECORE_RSS_IPV6, ¶ms.rss_flags);
|
|
bxe_set_bit(ECORE_RSS_IPV6_TCP, ¶ms.rss_flags);
|
|
if (rss_obj->udp_rss_v4) {
|
|
bxe_set_bit(ECORE_RSS_IPV4_UDP, ¶ms.rss_flags);
|
|
}
|
|
if (rss_obj->udp_rss_v6) {
|
|
bxe_set_bit(ECORE_RSS_IPV6_UDP, ¶ms.rss_flags);
|
|
}
|
|
|
|
/* Hash bits */
|
|
params.rss_result_mask = MULTI_MASK;
|
|
|
|
memcpy(params.ind_table, rss_obj->ind_table, sizeof(params.ind_table));
|
|
|
|
if (config_hash) {
|
|
/* RSS keys */
|
|
for (i = 0; i < sizeof(params.rss_key) / 4; i++) {
|
|
params.rss_key[i] = arc4random();
|
|
}
|
|
|
|
bxe_set_bit(ECORE_RSS_SET_SRCH, ¶ms.rss_flags);
|
|
}
|
|
|
|
return (ecore_config_rss(sc, ¶ms));
|
|
}
|
|
|
|
static int
|
|
bxe_config_rss_eth(struct bxe_softc *sc,
|
|
uint8_t config_hash)
|
|
{
|
|
return (bxe_config_rss_pf(sc, &sc->rss_conf_obj, config_hash));
|
|
}
|
|
|
|
static int
|
|
bxe_init_rss_pf(struct bxe_softc *sc)
|
|
{
|
|
uint8_t num_eth_queues = BXE_NUM_ETH_QUEUES(sc);
|
|
int i;
|
|
|
|
/*
|
|
* Prepare the initial contents of the indirection table if
|
|
* RSS is enabled
|
|
*/
|
|
for (i = 0; i < sizeof(sc->rss_conf_obj.ind_table); i++) {
|
|
sc->rss_conf_obj.ind_table[i] =
|
|
(sc->fp->cl_id + (i % num_eth_queues));
|
|
}
|
|
|
|
if (sc->udp_rss) {
|
|
sc->rss_conf_obj.udp_rss_v4 = sc->rss_conf_obj.udp_rss_v6 = 1;
|
|
}
|
|
|
|
/*
|
|
* For 57710 and 57711 SEARCHER configuration (rss_keys) is
|
|
* per-port, so if explicit configuration is needed, do it only
|
|
* for a PMF.
|
|
*
|
|
* For 57712 and newer it's a per-function configuration.
|
|
*/
|
|
return (bxe_config_rss_eth(sc, sc->port.pmf || !CHIP_IS_E1x(sc)));
|
|
}
|
|
|
|
static int
|
|
bxe_set_mac_one(struct bxe_softc *sc,
|
|
uint8_t *mac,
|
|
struct ecore_vlan_mac_obj *obj,
|
|
uint8_t set,
|
|
int mac_type,
|
|
unsigned long *ramrod_flags)
|
|
{
|
|
struct ecore_vlan_mac_ramrod_params ramrod_param;
|
|
int rc;
|
|
|
|
memset(&ramrod_param, 0, sizeof(ramrod_param));
|
|
|
|
/* fill in general parameters */
|
|
ramrod_param.vlan_mac_obj = obj;
|
|
ramrod_param.ramrod_flags = *ramrod_flags;
|
|
|
|
/* fill a user request section if needed */
|
|
if (!bxe_test_bit(RAMROD_CONT, ramrod_flags)) {
|
|
memcpy(ramrod_param.user_req.u.mac.mac, mac, ETH_ALEN);
|
|
|
|
bxe_set_bit(mac_type, &ramrod_param.user_req.vlan_mac_flags);
|
|
|
|
/* Set the command: ADD or DEL */
|
|
ramrod_param.user_req.cmd = (set) ? ECORE_VLAN_MAC_ADD :
|
|
ECORE_VLAN_MAC_DEL;
|
|
}
|
|
|
|
rc = ecore_config_vlan_mac(sc, &ramrod_param);
|
|
|
|
if (rc == ECORE_EXISTS) {
|
|
BLOGD(sc, DBG_SP, "Failed to schedule ADD operations (EEXIST)\n");
|
|
/* do not treat adding same MAC as error */
|
|
rc = 0;
|
|
} else if (rc < 0) {
|
|
BLOGE(sc, "%s MAC failed (%d)\n", (set ? "Set" : "Delete"), rc);
|
|
}
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static int
|
|
bxe_set_eth_mac(struct bxe_softc *sc,
|
|
uint8_t set)
|
|
{
|
|
unsigned long ramrod_flags = 0;
|
|
|
|
BLOGD(sc, DBG_LOAD, "Adding Ethernet MAC\n");
|
|
|
|
bxe_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
|
|
|
|
/* Eth MAC is set on RSS leading client (fp[0]) */
|
|
return (bxe_set_mac_one(sc, sc->link_params.mac_addr,
|
|
&sc->sp_objs->mac_obj,
|
|
set, ECORE_ETH_MAC, &ramrod_flags));
|
|
}
|
|
|
|
#if 0
|
|
static void
|
|
bxe_update_max_mf_config(struct bxe_softc *sc,
|
|
uint32_t value)
|
|
{
|
|
/* load old values */
|
|
uint32_t mf_cfg = sc->devinfo.mf_info.mf_config[SC_VN(sc)];
|
|
|
|
if (value != bxe_extract_max_cfg(sc, mf_cfg)) {
|
|
/* leave all but MAX value */
|
|
mf_cfg &= ~FUNC_MF_CFG_MAX_BW_MASK;
|
|
|
|
/* set new MAX value */
|
|
mf_cfg |= ((value << FUNC_MF_CFG_MAX_BW_SHIFT) &
|
|
FUNC_MF_CFG_MAX_BW_MASK);
|
|
|
|
bxe_fw_command(sc, DRV_MSG_CODE_SET_MF_BW, mf_cfg);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
bxe_get_cur_phy_idx(struct bxe_softc *sc)
|
|
{
|
|
uint32_t sel_phy_idx = 0;
|
|
|
|
if (sc->link_params.num_phys <= 1) {
|
|
return (ELINK_INT_PHY);
|
|
}
|
|
|
|
if (sc->link_vars.link_up) {
|
|
sel_phy_idx = ELINK_EXT_PHY1;
|
|
/* In case link is SERDES, check if the ELINK_EXT_PHY2 is the one */
|
|
if ((sc->link_vars.link_status & LINK_STATUS_SERDES_LINK) &&
|
|
(sc->link_params.phy[ELINK_EXT_PHY2].supported &
|
|
ELINK_SUPPORTED_FIBRE))
|
|
sel_phy_idx = ELINK_EXT_PHY2;
|
|
} else {
|
|
switch (elink_phy_selection(&sc->link_params)) {
|
|
case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
|
|
case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
|
|
case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
|
|
sel_phy_idx = ELINK_EXT_PHY1;
|
|
break;
|
|
case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
|
|
case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
|
|
sel_phy_idx = ELINK_EXT_PHY2;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return (sel_phy_idx);
|
|
}
|
|
|
|
static int
|
|
bxe_get_link_cfg_idx(struct bxe_softc *sc)
|
|
{
|
|
uint32_t sel_phy_idx = bxe_get_cur_phy_idx(sc);
|
|
|
|
/*
|
|
* The selected activated PHY is always after swapping (in case PHY
|
|
* swapping is enabled). So when swapping is enabled, we need to reverse
|
|
* the configuration
|
|
*/
|
|
|
|
if (sc->link_params.multi_phy_config & PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
|
|
if (sel_phy_idx == ELINK_EXT_PHY1)
|
|
sel_phy_idx = ELINK_EXT_PHY2;
|
|
else if (sel_phy_idx == ELINK_EXT_PHY2)
|
|
sel_phy_idx = ELINK_EXT_PHY1;
|
|
}
|
|
|
|
return (ELINK_LINK_CONFIG_IDX(sel_phy_idx));
|
|
}
|
|
|
|
static void
|
|
bxe_set_requested_fc(struct bxe_softc *sc)
|
|
{
|
|
/*
|
|
* Initialize link parameters structure variables
|
|
* It is recommended to turn off RX FC for jumbo frames
|
|
* for better performance
|
|
*/
|
|
if (CHIP_IS_E1x(sc) && (sc->mtu > 5000)) {
|
|
sc->link_params.req_fc_auto_adv = ELINK_FLOW_CTRL_TX;
|
|
} else {
|
|
sc->link_params.req_fc_auto_adv = ELINK_FLOW_CTRL_BOTH;
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_calc_fc_adv(struct bxe_softc *sc)
|
|
{
|
|
uint8_t cfg_idx = bxe_get_link_cfg_idx(sc);
|
|
switch (sc->link_vars.ieee_fc &
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
|
|
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
|
|
default:
|
|
sc->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
|
|
ADVERTISED_Pause);
|
|
break;
|
|
|
|
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
|
|
sc->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause |
|
|
ADVERTISED_Pause);
|
|
break;
|
|
|
|
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC:
|
|
sc->port.advertising[cfg_idx] |= ADVERTISED_Asym_Pause;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static uint16_t
|
|
bxe_get_mf_speed(struct bxe_softc *sc)
|
|
{
|
|
uint16_t line_speed = sc->link_vars.line_speed;
|
|
if (IS_MF(sc)) {
|
|
uint16_t maxCfg =
|
|
bxe_extract_max_cfg(sc, sc->devinfo.mf_info.mf_config[SC_VN(sc)]);
|
|
|
|
/* calculate the current MAX line speed limit for the MF devices */
|
|
if (IS_MF_SI(sc)) {
|
|
line_speed = (line_speed * maxCfg) / 100;
|
|
} else { /* SD mode */
|
|
uint16_t vn_max_rate = maxCfg * 100;
|
|
|
|
if (vn_max_rate < line_speed) {
|
|
line_speed = vn_max_rate;
|
|
}
|
|
}
|
|
}
|
|
|
|
return (line_speed);
|
|
}
|
|
|
|
static void
|
|
bxe_fill_report_data(struct bxe_softc *sc,
|
|
struct bxe_link_report_data *data)
|
|
{
|
|
uint16_t line_speed = bxe_get_mf_speed(sc);
|
|
|
|
memset(data, 0, sizeof(*data));
|
|
|
|
/* fill the report data with the effective line speed */
|
|
data->line_speed = line_speed;
|
|
|
|
/* Link is down */
|
|
if (!sc->link_vars.link_up || (sc->flags & BXE_MF_FUNC_DIS)) {
|
|
bxe_set_bit(BXE_LINK_REPORT_LINK_DOWN, &data->link_report_flags);
|
|
}
|
|
|
|
/* Full DUPLEX */
|
|
if (sc->link_vars.duplex == DUPLEX_FULL) {
|
|
bxe_set_bit(BXE_LINK_REPORT_FULL_DUPLEX, &data->link_report_flags);
|
|
}
|
|
|
|
/* Rx Flow Control is ON */
|
|
if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_RX) {
|
|
bxe_set_bit(BXE_LINK_REPORT_RX_FC_ON, &data->link_report_flags);
|
|
}
|
|
|
|
/* Tx Flow Control is ON */
|
|
if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_TX) {
|
|
bxe_set_bit(BXE_LINK_REPORT_TX_FC_ON, &data->link_report_flags);
|
|
}
|
|
}
|
|
|
|
/* report link status to OS, should be called under phy_lock */
|
|
static void
|
|
bxe_link_report_locked(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_link_report_data cur_data;
|
|
|
|
/* reread mf_cfg */
|
|
if (IS_PF(sc) && !CHIP_IS_E1(sc)) {
|
|
bxe_read_mf_cfg(sc);
|
|
}
|
|
|
|
/* Read the current link report info */
|
|
bxe_fill_report_data(sc, &cur_data);
|
|
|
|
/* Don't report link down or exactly the same link status twice */
|
|
if (!memcmp(&cur_data, &sc->last_reported_link, sizeof(cur_data)) ||
|
|
(bxe_test_bit(BXE_LINK_REPORT_LINK_DOWN,
|
|
&sc->last_reported_link.link_report_flags) &&
|
|
bxe_test_bit(BXE_LINK_REPORT_LINK_DOWN,
|
|
&cur_data.link_report_flags))) {
|
|
return;
|
|
}
|
|
|
|
sc->link_cnt++;
|
|
|
|
/* report new link params and remember the state for the next time */
|
|
memcpy(&sc->last_reported_link, &cur_data, sizeof(cur_data));
|
|
|
|
if (bxe_test_bit(BXE_LINK_REPORT_LINK_DOWN,
|
|
&cur_data.link_report_flags)) {
|
|
if_linkstate_change_drv(sc->ifp, LINK_STATE_DOWN);
|
|
BLOGI(sc, "NIC Link is Down\n");
|
|
} else {
|
|
const char *duplex;
|
|
const char *flow;
|
|
|
|
if (bxe_test_and_clear_bit(BXE_LINK_REPORT_FULL_DUPLEX,
|
|
&cur_data.link_report_flags)) {
|
|
duplex = "full";
|
|
} else {
|
|
duplex = "half";
|
|
}
|
|
|
|
/*
|
|
* Handle the FC at the end so that only these flags would be
|
|
* possibly set. This way we may easily check if there is no FC
|
|
* enabled.
|
|
*/
|
|
if (cur_data.link_report_flags) {
|
|
if (bxe_test_bit(BXE_LINK_REPORT_RX_FC_ON,
|
|
&cur_data.link_report_flags) &&
|
|
bxe_test_bit(BXE_LINK_REPORT_TX_FC_ON,
|
|
&cur_data.link_report_flags)) {
|
|
flow = "ON - receive & transmit";
|
|
} else if (bxe_test_bit(BXE_LINK_REPORT_RX_FC_ON,
|
|
&cur_data.link_report_flags) &&
|
|
!bxe_test_bit(BXE_LINK_REPORT_TX_FC_ON,
|
|
&cur_data.link_report_flags)) {
|
|
flow = "ON - receive";
|
|
} else if (!bxe_test_bit(BXE_LINK_REPORT_RX_FC_ON,
|
|
&cur_data.link_report_flags) &&
|
|
bxe_test_bit(BXE_LINK_REPORT_TX_FC_ON,
|
|
&cur_data.link_report_flags)) {
|
|
flow = "ON - transmit";
|
|
} else {
|
|
flow = "none"; /* possible? */
|
|
}
|
|
} else {
|
|
flow = "none";
|
|
}
|
|
|
|
if_linkstate_change_drv(sc->ifp, LINK_STATE_UP);
|
|
BLOGI(sc, "NIC Link is Up, %d Mbps %s duplex, Flow control: %s\n",
|
|
cur_data.line_speed, duplex, flow);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_link_report(struct bxe_softc *sc)
|
|
{
|
|
BXE_PHY_LOCK(sc);
|
|
bxe_link_report_locked(sc);
|
|
BXE_PHY_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
bxe_link_status_update(struct bxe_softc *sc)
|
|
{
|
|
if (sc->state != BXE_STATE_OPEN) {
|
|
return;
|
|
}
|
|
|
|
#if 0
|
|
/* read updated dcb configuration */
|
|
if (IS_PF(sc))
|
|
bxe_dcbx_pmf_update(sc);
|
|
#endif
|
|
|
|
if (IS_PF(sc) && !CHIP_REV_IS_SLOW(sc)) {
|
|
elink_link_status_update(&sc->link_params, &sc->link_vars);
|
|
} else {
|
|
sc->port.supported[0] |= (ELINK_SUPPORTED_10baseT_Half |
|
|
ELINK_SUPPORTED_10baseT_Full |
|
|
ELINK_SUPPORTED_100baseT_Half |
|
|
ELINK_SUPPORTED_100baseT_Full |
|
|
ELINK_SUPPORTED_1000baseT_Full |
|
|
ELINK_SUPPORTED_2500baseX_Full |
|
|
ELINK_SUPPORTED_10000baseT_Full |
|
|
ELINK_SUPPORTED_TP |
|
|
ELINK_SUPPORTED_FIBRE |
|
|
ELINK_SUPPORTED_Autoneg |
|
|
ELINK_SUPPORTED_Pause |
|
|
ELINK_SUPPORTED_Asym_Pause);
|
|
sc->port.advertising[0] = sc->port.supported[0];
|
|
|
|
sc->link_params.sc = sc;
|
|
sc->link_params.port = SC_PORT(sc);
|
|
sc->link_params.req_duplex[0] = DUPLEX_FULL;
|
|
sc->link_params.req_flow_ctrl[0] = ELINK_FLOW_CTRL_NONE;
|
|
sc->link_params.req_line_speed[0] = SPEED_10000;
|
|
sc->link_params.speed_cap_mask[0] = 0x7f0000;
|
|
sc->link_params.switch_cfg = ELINK_SWITCH_CFG_10G;
|
|
|
|
if (CHIP_REV_IS_FPGA(sc)) {
|
|
sc->link_vars.mac_type = ELINK_MAC_TYPE_EMAC;
|
|
sc->link_vars.line_speed = ELINK_SPEED_1000;
|
|
sc->link_vars.link_status = (LINK_STATUS_LINK_UP |
|
|
LINK_STATUS_SPEED_AND_DUPLEX_1000TFD);
|
|
} else {
|
|
sc->link_vars.mac_type = ELINK_MAC_TYPE_BMAC;
|
|
sc->link_vars.line_speed = ELINK_SPEED_10000;
|
|
sc->link_vars.link_status = (LINK_STATUS_LINK_UP |
|
|
LINK_STATUS_SPEED_AND_DUPLEX_10GTFD);
|
|
}
|
|
|
|
sc->link_vars.link_up = 1;
|
|
|
|
sc->link_vars.duplex = DUPLEX_FULL;
|
|
sc->link_vars.flow_ctrl = ELINK_FLOW_CTRL_NONE;
|
|
|
|
if (IS_PF(sc)) {
|
|
REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + sc->link_params.port*4, 0);
|
|
bxe_stats_handle(sc, STATS_EVENT_LINK_UP);
|
|
bxe_link_report(sc);
|
|
}
|
|
}
|
|
|
|
if (IS_PF(sc)) {
|
|
if (sc->link_vars.link_up) {
|
|
bxe_stats_handle(sc, STATS_EVENT_LINK_UP);
|
|
} else {
|
|
bxe_stats_handle(sc, STATS_EVENT_STOP);
|
|
}
|
|
bxe_link_report(sc);
|
|
} else {
|
|
bxe_link_report(sc);
|
|
bxe_stats_handle(sc, STATS_EVENT_LINK_UP);
|
|
}
|
|
}
|
|
|
|
static int
|
|
bxe_initial_phy_init(struct bxe_softc *sc,
|
|
int load_mode)
|
|
{
|
|
int rc, cfg_idx = bxe_get_link_cfg_idx(sc);
|
|
uint16_t req_line_speed = sc->link_params.req_line_speed[cfg_idx];
|
|
struct elink_params *lp = &sc->link_params;
|
|
|
|
bxe_set_requested_fc(sc);
|
|
|
|
if (CHIP_REV_IS_SLOW(sc)) {
|
|
uint32_t bond = CHIP_BOND_ID(sc);
|
|
uint32_t feat = 0;
|
|
|
|
if (CHIP_IS_E2(sc) && CHIP_IS_MODE_4_PORT(sc)) {
|
|
feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC;
|
|
} else if (bond & 0x4) {
|
|
if (CHIP_IS_E3(sc)) {
|
|
feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC;
|
|
} else {
|
|
feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC;
|
|
}
|
|
} else if (bond & 0x8) {
|
|
if (CHIP_IS_E3(sc)) {
|
|
feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_UMAC;
|
|
} else {
|
|
feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC;
|
|
}
|
|
}
|
|
|
|
/* disable EMAC for E3 and above */
|
|
if (bond & 0x2) {
|
|
feat |= ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC;
|
|
}
|
|
|
|
sc->link_params.feature_config_flags |= feat;
|
|
}
|
|
|
|
BXE_PHY_LOCK(sc);
|
|
|
|
if (load_mode == LOAD_DIAG) {
|
|
lp->loopback_mode = ELINK_LOOPBACK_XGXS;
|
|
/* Prefer doing PHY loopback at 10G speed, if possible */
|
|
if (lp->req_line_speed[cfg_idx] < ELINK_SPEED_10000) {
|
|
if (lp->speed_cap_mask[cfg_idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
|
|
lp->req_line_speed[cfg_idx] = ELINK_SPEED_10000;
|
|
} else {
|
|
lp->req_line_speed[cfg_idx] = ELINK_SPEED_1000;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (load_mode == LOAD_LOOPBACK_EXT) {
|
|
lp->loopback_mode = ELINK_LOOPBACK_EXT;
|
|
}
|
|
|
|
rc = elink_phy_init(&sc->link_params, &sc->link_vars);
|
|
|
|
BXE_PHY_UNLOCK(sc);
|
|
|
|
bxe_calc_fc_adv(sc);
|
|
|
|
if (sc->link_vars.link_up) {
|
|
bxe_stats_handle(sc, STATS_EVENT_LINK_UP);
|
|
bxe_link_report(sc);
|
|
}
|
|
|
|
if (!CHIP_REV_IS_SLOW(sc)) {
|
|
bxe_periodic_start(sc);
|
|
}
|
|
|
|
sc->link_params.req_line_speed[cfg_idx] = req_line_speed;
|
|
return (rc);
|
|
}
|
|
|
|
/* must be called under IF_ADDR_LOCK */
|
|
static int
|
|
bxe_init_mcast_macs_list(struct bxe_softc *sc,
|
|
struct ecore_mcast_ramrod_params *p)
|
|
{
|
|
if_t ifp = sc->ifp;
|
|
int mc_count = 0;
|
|
int mcnt, i;
|
|
struct ecore_mcast_list_elem *mc_mac;
|
|
unsigned char *mta;
|
|
|
|
mc_count = if_multiaddr_count(ifp, -1);/* XXX they don't have a limit */
|
|
/* should we enforce one? */
|
|
ECORE_LIST_INIT(&p->mcast_list);
|
|
p->mcast_list_len = 0;
|
|
|
|
if (!mc_count) {
|
|
return (0);
|
|
}
|
|
|
|
mta = malloc(sizeof(unsigned char) * ETHER_ADDR_LEN *
|
|
mc_count, M_DEVBUF, M_NOWAIT);
|
|
|
|
if(mta == NULL) {
|
|
BLOGE(sc, "Failed to allocate temp mcast list\n");
|
|
return (-1);
|
|
}
|
|
|
|
mc_mac = malloc(sizeof(*mc_mac) * mc_count, M_DEVBUF,
|
|
(M_NOWAIT | M_ZERO));
|
|
if (!mc_mac) {
|
|
free(mta, M_DEVBUF);
|
|
BLOGE(sc, "Failed to allocate temp mcast list\n");
|
|
return (-1);
|
|
}
|
|
|
|
if_multiaddr_array(ifp, mta, &mcnt, mc_count); /* mta and mcnt not expected
|
|
to be different */
|
|
for(i=0; i< mcnt; i++) {
|
|
|
|
bcopy((mta + (i * ETHER_ADDR_LEN)), mc_mac->mac, ETHER_ADDR_LEN);
|
|
ECORE_LIST_PUSH_TAIL(&mc_mac->link, &p->mcast_list);
|
|
|
|
BLOGD(sc, DBG_LOAD,
|
|
"Setting MCAST %02X:%02X:%02X:%02X:%02X:%02X\n",
|
|
mc_mac->mac[0], mc_mac->mac[1], mc_mac->mac[2],
|
|
mc_mac->mac[3], mc_mac->mac[4], mc_mac->mac[5]);
|
|
|
|
mc_mac++;
|
|
}
|
|
|
|
p->mcast_list_len = mc_count;
|
|
free(mta, M_DEVBUF);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bxe_free_mcast_macs_list(struct ecore_mcast_ramrod_params *p)
|
|
{
|
|
struct ecore_mcast_list_elem *mc_mac =
|
|
ECORE_LIST_FIRST_ENTRY(&p->mcast_list,
|
|
struct ecore_mcast_list_elem,
|
|
link);
|
|
|
|
if (mc_mac) {
|
|
/* only a single free as all mc_macs are in the same heap array */
|
|
free(mc_mac, M_DEVBUF);
|
|
}
|
|
}
|
|
|
|
static int
|
|
bxe_set_mc_list(struct bxe_softc *sc)
|
|
{
|
|
struct ecore_mcast_ramrod_params rparam = { NULL };
|
|
int rc = 0;
|
|
|
|
rparam.mcast_obj = &sc->mcast_obj;
|
|
|
|
BXE_MCAST_LOCK(sc);
|
|
|
|
/* first, clear all configured multicast MACs */
|
|
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_DEL);
|
|
if (rc < 0) {
|
|
BLOGE(sc, "Failed to clear multicast configuration: %d\n", rc);
|
|
return (rc);
|
|
}
|
|
|
|
/* configure a new MACs list */
|
|
rc = bxe_init_mcast_macs_list(sc, &rparam);
|
|
if (rc) {
|
|
BLOGE(sc, "Failed to create mcast MACs list (%d)\n", rc);
|
|
BXE_MCAST_UNLOCK(sc);
|
|
return (rc);
|
|
}
|
|
|
|
/* Now add the new MACs */
|
|
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_ADD);
|
|
if (rc < 0) {
|
|
BLOGE(sc, "Failed to set new mcast config (%d)\n", rc);
|
|
}
|
|
|
|
bxe_free_mcast_macs_list(&rparam);
|
|
|
|
BXE_MCAST_UNLOCK(sc);
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static int
|
|
bxe_set_uc_list(struct bxe_softc *sc)
|
|
{
|
|
if_t ifp = sc->ifp;
|
|
struct ecore_vlan_mac_obj *mac_obj = &sc->sp_objs->mac_obj;
|
|
struct ifaddr *ifa;
|
|
unsigned long ramrod_flags = 0;
|
|
int rc;
|
|
|
|
#if __FreeBSD_version < 800000
|
|
IF_ADDR_LOCK(ifp);
|
|
#else
|
|
if_addr_rlock_drv(ifp);
|
|
#endif
|
|
|
|
/* first schedule a cleanup up of old configuration */
|
|
rc = bxe_del_all_macs(sc, mac_obj, ECORE_UC_LIST_MAC, FALSE);
|
|
if (rc < 0) {
|
|
BLOGE(sc, "Failed to schedule delete of all ETH MACs (%d)\n", rc);
|
|
#if __FreeBSD_version < 800000
|
|
IF_ADDR_UNLOCK(ifp);
|
|
#else
|
|
if_addr_runlock_drv(ifp);
|
|
#endif
|
|
return (rc);
|
|
}
|
|
|
|
ifa = if_getifaddr(ifp); /* XXX Is this structure */
|
|
while (ifa) {
|
|
if (ifa->ifa_addr->sa_family != AF_LINK) {
|
|
ifa = TAILQ_NEXT(ifa, ifa_link);
|
|
continue;
|
|
}
|
|
|
|
rc = bxe_set_mac_one(sc, (uint8_t *)LLADDR((struct sockaddr_dl *)ifa->ifa_addr),
|
|
mac_obj, TRUE, ECORE_UC_LIST_MAC, &ramrod_flags);
|
|
if (rc == -EEXIST) {
|
|
BLOGD(sc, DBG_SP, "Failed to schedule ADD operations (EEXIST)\n");
|
|
/* do not treat adding same MAC as an error */
|
|
rc = 0;
|
|
} else if (rc < 0) {
|
|
BLOGE(sc, "Failed to schedule ADD operations (%d)\n", rc);
|
|
#if __FreeBSD_version < 800000
|
|
IF_ADDR_UNLOCK(ifp);
|
|
#else
|
|
if_addr_runlock_drv(ifp);
|
|
#endif
|
|
return (rc);
|
|
}
|
|
|
|
ifa = TAILQ_NEXT(ifa, ifa_link);
|
|
}
|
|
|
|
#if __FreeBSD_version < 800000
|
|
IF_ADDR_UNLOCK(ifp);
|
|
#else
|
|
if_addr_runlock_drv(ifp);
|
|
#endif
|
|
|
|
/* Execute the pending commands */
|
|
bit_set(&ramrod_flags, RAMROD_CONT);
|
|
return (bxe_set_mac_one(sc, NULL, mac_obj, FALSE /* don't care */,
|
|
ECORE_UC_LIST_MAC, &ramrod_flags));
|
|
}
|
|
|
|
static void
|
|
bxe_handle_rx_mode_tq(void *context,
|
|
int pending)
|
|
{
|
|
struct bxe_softc *sc = (struct bxe_softc *)context;
|
|
if_t ifp = sc->ifp;
|
|
uint32_t rx_mode = BXE_RX_MODE_NORMAL;
|
|
|
|
BXE_CORE_LOCK(sc);
|
|
|
|
if (sc->state != BXE_STATE_OPEN) {
|
|
BLOGD(sc, DBG_SP, "state is %x, returning\n", sc->state);
|
|
BXE_CORE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
BLOGD(sc, DBG_SP, "if_flags(ifp)=0x%x\n", if_getflags(sc->ifp));
|
|
|
|
if (if_getflags(ifp) & IFF_PROMISC) {
|
|
rx_mode = BXE_RX_MODE_PROMISC;
|
|
} else if ((if_getflags(ifp) & IFF_ALLMULTI) ||
|
|
((if_getamcount(ifp) > BXE_MAX_MULTICAST) &&
|
|
CHIP_IS_E1(sc))) {
|
|
rx_mode = BXE_RX_MODE_ALLMULTI;
|
|
} else {
|
|
if (IS_PF(sc)) {
|
|
/* some multicasts */
|
|
if (bxe_set_mc_list(sc) < 0) {
|
|
rx_mode = BXE_RX_MODE_ALLMULTI;
|
|
}
|
|
if (bxe_set_uc_list(sc) < 0) {
|
|
rx_mode = BXE_RX_MODE_PROMISC;
|
|
}
|
|
}
|
|
#if 0
|
|
else {
|
|
/*
|
|
* Configuring mcast to a VF involves sleeping (when we
|
|
* wait for the PF's response). Since this function is
|
|
* called from a non sleepable context we must schedule
|
|
* a work item for this purpose
|
|
*/
|
|
bxe_set_bit(BXE_SP_RTNL_VFPF_MCAST, &sc->sp_rtnl_state);
|
|
schedule_delayed_work(&sc->sp_rtnl_task, 0);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
sc->rx_mode = rx_mode;
|
|
|
|
/* schedule the rx_mode command */
|
|
if (bxe_test_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state)) {
|
|
BLOGD(sc, DBG_LOAD, "Scheduled setting rx_mode with ECORE...\n");
|
|
bxe_set_bit(ECORE_FILTER_RX_MODE_SCHED, &sc->sp_state);
|
|
BXE_CORE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
if (IS_PF(sc)) {
|
|
bxe_set_storm_rx_mode(sc);
|
|
}
|
|
#if 0
|
|
else {
|
|
/*
|
|
* Configuring mcast to a VF involves sleeping (when we
|
|
* wait for the PF's response). Since this function is
|
|
* called from a non sleepable context we must schedule
|
|
* a work item for this purpose
|
|
*/
|
|
bxe_set_bit(BXE_SP_RTNL_VFPF_STORM_RX_MODE, &sc->sp_rtnl_state);
|
|
schedule_delayed_work(&sc->sp_rtnl_task, 0);
|
|
}
|
|
#endif
|
|
|
|
BXE_CORE_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
bxe_set_rx_mode(struct bxe_softc *sc)
|
|
{
|
|
taskqueue_enqueue(sc->rx_mode_tq, &sc->rx_mode_tq_task);
|
|
}
|
|
|
|
/* update flags in shmem */
|
|
static void
|
|
bxe_update_drv_flags(struct bxe_softc *sc,
|
|
uint32_t flags,
|
|
uint32_t set)
|
|
{
|
|
uint32_t drv_flags;
|
|
|
|
if (SHMEM2_HAS(sc, drv_flags)) {
|
|
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_DRV_FLAGS);
|
|
drv_flags = SHMEM2_RD(sc, drv_flags);
|
|
|
|
if (set) {
|
|
SET_FLAGS(drv_flags, flags);
|
|
} else {
|
|
RESET_FLAGS(drv_flags, flags);
|
|
}
|
|
|
|
SHMEM2_WR(sc, drv_flags, drv_flags);
|
|
BLOGD(sc, DBG_LOAD, "drv_flags 0x%08x\n", drv_flags);
|
|
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_DRV_FLAGS);
|
|
}
|
|
}
|
|
|
|
/* periodic timer callout routine, only runs when the interface is up */
|
|
|
|
static void
|
|
bxe_periodic_callout_func(void *xsc)
|
|
{
|
|
struct bxe_softc *sc = (struct bxe_softc *)xsc;
|
|
int i;
|
|
|
|
if (!BXE_CORE_TRYLOCK(sc)) {
|
|
/* just bail and try again next time */
|
|
|
|
if ((sc->state == BXE_STATE_OPEN) &&
|
|
(atomic_load_acq_long(&sc->periodic_flags) == PERIODIC_GO)) {
|
|
/* schedule the next periodic callout */
|
|
callout_reset(&sc->periodic_callout, hz,
|
|
bxe_periodic_callout_func, sc);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
if ((sc->state != BXE_STATE_OPEN) ||
|
|
(atomic_load_acq_long(&sc->periodic_flags) == PERIODIC_STOP)) {
|
|
BLOGW(sc, "periodic callout exit (state=0x%x)\n", sc->state);
|
|
BXE_CORE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/* Check for TX timeouts on any fastpath. */
|
|
FOR_EACH_QUEUE(sc, i) {
|
|
if (bxe_watchdog(sc, &sc->fp[i]) != 0) {
|
|
/* Ruh-Roh, chip was reset! */
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!CHIP_REV_IS_SLOW(sc)) {
|
|
/*
|
|
* This barrier is needed to ensure the ordering between the writing
|
|
* to the sc->port.pmf in the bxe_nic_load() or bxe_pmf_update() and
|
|
* the reading here.
|
|
*/
|
|
mb();
|
|
if (sc->port.pmf) {
|
|
BXE_PHY_LOCK(sc);
|
|
elink_period_func(&sc->link_params, &sc->link_vars);
|
|
BXE_PHY_UNLOCK(sc);
|
|
}
|
|
}
|
|
|
|
if (IS_PF(sc) && !BXE_NOMCP(sc)) {
|
|
int mb_idx = SC_FW_MB_IDX(sc);
|
|
uint32_t drv_pulse;
|
|
uint32_t mcp_pulse;
|
|
|
|
++sc->fw_drv_pulse_wr_seq;
|
|
sc->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;
|
|
|
|
drv_pulse = sc->fw_drv_pulse_wr_seq;
|
|
bxe_drv_pulse(sc);
|
|
|
|
mcp_pulse = (SHMEM_RD(sc, func_mb[mb_idx].mcp_pulse_mb) &
|
|
MCP_PULSE_SEQ_MASK);
|
|
|
|
/*
|
|
* The delta between driver pulse and mcp response should
|
|
* be 1 (before mcp response) or 0 (after mcp response).
|
|
*/
|
|
if ((drv_pulse != mcp_pulse) &&
|
|
(drv_pulse != ((mcp_pulse + 1) & MCP_PULSE_SEQ_MASK))) {
|
|
/* someone lost a heartbeat... */
|
|
BLOGE(sc, "drv_pulse (0x%x) != mcp_pulse (0x%x)\n",
|
|
drv_pulse, mcp_pulse);
|
|
}
|
|
}
|
|
|
|
/* state is BXE_STATE_OPEN */
|
|
bxe_stats_handle(sc, STATS_EVENT_UPDATE);
|
|
|
|
#if 0
|
|
/* sample VF bulletin board for new posts from PF */
|
|
if (IS_VF(sc)) {
|
|
bxe_sample_bulletin(sc);
|
|
}
|
|
#endif
|
|
|
|
BXE_CORE_UNLOCK(sc);
|
|
|
|
if ((sc->state == BXE_STATE_OPEN) &&
|
|
(atomic_load_acq_long(&sc->periodic_flags) == PERIODIC_GO)) {
|
|
/* schedule the next periodic callout */
|
|
callout_reset(&sc->periodic_callout, hz,
|
|
bxe_periodic_callout_func, sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_periodic_start(struct bxe_softc *sc)
|
|
{
|
|
atomic_store_rel_long(&sc->periodic_flags, PERIODIC_GO);
|
|
callout_reset(&sc->periodic_callout, hz, bxe_periodic_callout_func, sc);
|
|
}
|
|
|
|
static void
|
|
bxe_periodic_stop(struct bxe_softc *sc)
|
|
{
|
|
atomic_store_rel_long(&sc->periodic_flags, PERIODIC_STOP);
|
|
callout_drain(&sc->periodic_callout);
|
|
}
|
|
|
|
/* start the controller */
|
|
static __noinline int
|
|
bxe_nic_load(struct bxe_softc *sc,
|
|
int load_mode)
|
|
{
|
|
uint32_t val;
|
|
int load_code = 0;
|
|
int i, rc = 0;
|
|
|
|
BXE_CORE_LOCK_ASSERT(sc);
|
|
|
|
BLOGD(sc, DBG_LOAD, "Starting NIC load...\n");
|
|
|
|
sc->state = BXE_STATE_OPENING_WAITING_LOAD;
|
|
|
|
if (IS_PF(sc)) {
|
|
/* must be called before memory allocation and HW init */
|
|
bxe_ilt_set_info(sc);
|
|
}
|
|
|
|
sc->last_reported_link_state = LINK_STATE_UNKNOWN;
|
|
|
|
bxe_set_fp_rx_buf_size(sc);
|
|
|
|
if (bxe_alloc_fp_buffers(sc) != 0) {
|
|
BLOGE(sc, "Failed to allocate fastpath memory\n");
|
|
sc->state = BXE_STATE_CLOSED;
|
|
rc = ENOMEM;
|
|
goto bxe_nic_load_error0;
|
|
}
|
|
|
|
if (bxe_alloc_mem(sc) != 0) {
|
|
sc->state = BXE_STATE_CLOSED;
|
|
rc = ENOMEM;
|
|
goto bxe_nic_load_error0;
|
|
}
|
|
|
|
if (bxe_alloc_fw_stats_mem(sc) != 0) {
|
|
sc->state = BXE_STATE_CLOSED;
|
|
rc = ENOMEM;
|
|
goto bxe_nic_load_error0;
|
|
}
|
|
|
|
if (IS_PF(sc)) {
|
|
/* set pf load just before approaching the MCP */
|
|
bxe_set_pf_load(sc);
|
|
|
|
/* if MCP exists send load request and analyze response */
|
|
if (!BXE_NOMCP(sc)) {
|
|
/* attempt to load pf */
|
|
if (bxe_nic_load_request(sc, &load_code) != 0) {
|
|
sc->state = BXE_STATE_CLOSED;
|
|
rc = ENXIO;
|
|
goto bxe_nic_load_error1;
|
|
}
|
|
|
|
/* what did the MCP say? */
|
|
if (bxe_nic_load_analyze_req(sc, load_code) != 0) {
|
|
bxe_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
|
|
sc->state = BXE_STATE_CLOSED;
|
|
rc = ENXIO;
|
|
goto bxe_nic_load_error2;
|
|
}
|
|
} else {
|
|
BLOGI(sc, "Device has no MCP!\n");
|
|
load_code = bxe_nic_load_no_mcp(sc);
|
|
}
|
|
|
|
/* mark PMF if applicable */
|
|
bxe_nic_load_pmf(sc, load_code);
|
|
|
|
/* Init Function state controlling object */
|
|
bxe_init_func_obj(sc);
|
|
|
|
/* Initialize HW */
|
|
if (bxe_init_hw(sc, load_code) != 0) {
|
|
BLOGE(sc, "HW init failed\n");
|
|
bxe_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
|
|
sc->state = BXE_STATE_CLOSED;
|
|
rc = ENXIO;
|
|
goto bxe_nic_load_error2;
|
|
}
|
|
}
|
|
|
|
/* attach interrupts */
|
|
if (bxe_interrupt_attach(sc) != 0) {
|
|
sc->state = BXE_STATE_CLOSED;
|
|
rc = ENXIO;
|
|
goto bxe_nic_load_error2;
|
|
}
|
|
|
|
bxe_nic_init(sc, load_code);
|
|
|
|
/* Init per-function objects */
|
|
if (IS_PF(sc)) {
|
|
bxe_init_objs(sc);
|
|
// XXX bxe_iov_nic_init(sc);
|
|
|
|
/* set AFEX default VLAN tag to an invalid value */
|
|
sc->devinfo.mf_info.afex_def_vlan_tag = -1;
|
|
// XXX bxe_nic_load_afex_dcc(sc, load_code);
|
|
|
|
sc->state = BXE_STATE_OPENING_WAITING_PORT;
|
|
rc = bxe_func_start(sc);
|
|
if (rc) {
|
|
BLOGE(sc, "Function start failed!\n");
|
|
bxe_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
|
|
sc->state = BXE_STATE_ERROR;
|
|
goto bxe_nic_load_error3;
|
|
}
|
|
|
|
/* send LOAD_DONE command to MCP */
|
|
if (!BXE_NOMCP(sc)) {
|
|
load_code = bxe_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
|
|
if (!load_code) {
|
|
BLOGE(sc, "MCP response failure, aborting\n");
|
|
sc->state = BXE_STATE_ERROR;
|
|
rc = ENXIO;
|
|
goto bxe_nic_load_error3;
|
|
}
|
|
}
|
|
|
|
rc = bxe_setup_leading(sc);
|
|
if (rc) {
|
|
BLOGE(sc, "Setup leading failed!\n");
|
|
sc->state = BXE_STATE_ERROR;
|
|
goto bxe_nic_load_error3;
|
|
}
|
|
|
|
FOR_EACH_NONDEFAULT_ETH_QUEUE(sc, i) {
|
|
rc = bxe_setup_queue(sc, &sc->fp[i], FALSE);
|
|
if (rc) {
|
|
BLOGE(sc, "Queue(%d) setup failed\n", i);
|
|
sc->state = BXE_STATE_ERROR;
|
|
goto bxe_nic_load_error3;
|
|
}
|
|
}
|
|
|
|
rc = bxe_init_rss_pf(sc);
|
|
if (rc) {
|
|
BLOGE(sc, "PF RSS init failed\n");
|
|
sc->state = BXE_STATE_ERROR;
|
|
goto bxe_nic_load_error3;
|
|
}
|
|
}
|
|
/* XXX VF */
|
|
#if 0
|
|
else { /* VF */
|
|
FOR_EACH_ETH_QUEUE(sc, i) {
|
|
rc = bxe_vfpf_setup_q(sc, i);
|
|
if (rc) {
|
|
BLOGE(sc, "Queue(%d) setup failed\n", i);
|
|
sc->state = BXE_STATE_ERROR;
|
|
goto bxe_nic_load_error3;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* now when Clients are configured we are ready to work */
|
|
sc->state = BXE_STATE_OPEN;
|
|
|
|
/* Configure a ucast MAC */
|
|
if (IS_PF(sc)) {
|
|
rc = bxe_set_eth_mac(sc, TRUE);
|
|
}
|
|
#if 0
|
|
else { /* IS_VF(sc) */
|
|
rc = bxe_vfpf_set_mac(sc);
|
|
}
|
|
#endif
|
|
if (rc) {
|
|
BLOGE(sc, "Setting Ethernet MAC failed\n");
|
|
sc->state = BXE_STATE_ERROR;
|
|
goto bxe_nic_load_error3;
|
|
}
|
|
|
|
#if 0
|
|
if (IS_PF(sc) && sc->pending_max) {
|
|
/* for AFEX */
|
|
bxe_update_max_mf_config(sc, sc->pending_max);
|
|
sc->pending_max = 0;
|
|
}
|
|
#endif
|
|
|
|
if (sc->port.pmf) {
|
|
rc = bxe_initial_phy_init(sc, /* XXX load_mode */LOAD_OPEN);
|
|
if (rc) {
|
|
sc->state = BXE_STATE_ERROR;
|
|
goto bxe_nic_load_error3;
|
|
}
|
|
}
|
|
|
|
sc->link_params.feature_config_flags &=
|
|
~ELINK_FEATURE_CONFIG_BOOT_FROM_SAN;
|
|
|
|
/* start fast path */
|
|
|
|
/* Initialize Rx filter */
|
|
bxe_set_rx_mode(sc);
|
|
|
|
/* start the Tx */
|
|
switch (/* XXX load_mode */LOAD_OPEN) {
|
|
case LOAD_NORMAL:
|
|
case LOAD_OPEN:
|
|
break;
|
|
|
|
case LOAD_DIAG:
|
|
case LOAD_LOOPBACK_EXT:
|
|
sc->state = BXE_STATE_DIAG;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (sc->port.pmf) {
|
|
bxe_update_drv_flags(sc, 1 << DRV_FLAGS_PORT_MASK, 0);
|
|
} else {
|
|
bxe_link_status_update(sc);
|
|
}
|
|
|
|
/* start the periodic timer callout */
|
|
bxe_periodic_start(sc);
|
|
|
|
if (IS_PF(sc) && SHMEM2_HAS(sc, drv_capabilities_flag)) {
|
|
/* mark driver is loaded in shmem2 */
|
|
val = SHMEM2_RD(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)]);
|
|
SHMEM2_WR(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)],
|
|
(val |
|
|
DRV_FLAGS_CAPABILITIES_LOADED_SUPPORTED |
|
|
DRV_FLAGS_CAPABILITIES_LOADED_L2));
|
|
}
|
|
|
|
/* wait for all pending SP commands to complete */
|
|
if (IS_PF(sc) && !bxe_wait_sp_comp(sc, ~0x0UL)) {
|
|
BLOGE(sc, "Timeout waiting for all SPs to complete!\n");
|
|
bxe_periodic_stop(sc);
|
|
bxe_nic_unload(sc, UNLOAD_CLOSE, FALSE);
|
|
return (ENXIO);
|
|
}
|
|
|
|
#if 0
|
|
/* If PMF - send ADMIN DCBX msg to MFW to initiate DCBX FSM */
|
|
if (sc->port.pmf && (sc->state != BXE_STATE_DIAG)) {
|
|
bxe_dcbx_init(sc, FALSE);
|
|
}
|
|
#endif
|
|
|
|
/* Tell the stack the driver is running! */
|
|
if_setdrvflags(sc->ifp, IFF_DRV_RUNNING);
|
|
|
|
BLOGD(sc, DBG_LOAD, "NIC successfully loaded\n");
|
|
|
|
return (0);
|
|
|
|
bxe_nic_load_error3:
|
|
|
|
if (IS_PF(sc)) {
|
|
bxe_int_disable_sync(sc, 1);
|
|
|
|
/* clean out queued objects */
|
|
bxe_squeeze_objects(sc);
|
|
}
|
|
|
|
bxe_interrupt_detach(sc);
|
|
|
|
bxe_nic_load_error2:
|
|
|
|
if (IS_PF(sc) && !BXE_NOMCP(sc)) {
|
|
bxe_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
|
|
bxe_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, 0);
|
|
}
|
|
|
|
sc->port.pmf = 0;
|
|
|
|
bxe_nic_load_error1:
|
|
|
|
/* clear pf_load status, as it was already set */
|
|
if (IS_PF(sc)) {
|
|
bxe_clear_pf_load(sc);
|
|
}
|
|
|
|
bxe_nic_load_error0:
|
|
|
|
bxe_free_fw_stats_mem(sc);
|
|
bxe_free_fp_buffers(sc);
|
|
bxe_free_mem(sc);
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static int
|
|
bxe_init_locked(struct bxe_softc *sc)
|
|
{
|
|
int other_engine = SC_PATH(sc) ? 0 : 1;
|
|
uint8_t other_load_status, load_status;
|
|
uint8_t global = FALSE;
|
|
int rc;
|
|
|
|
BXE_CORE_LOCK_ASSERT(sc);
|
|
|
|
/* check if the driver is already running */
|
|
if (if_getdrvflags(sc->ifp) & IFF_DRV_RUNNING) {
|
|
BLOGD(sc, DBG_LOAD, "Init called while driver is running!\n");
|
|
return (0);
|
|
}
|
|
|
|
bxe_set_power_state(sc, PCI_PM_D0);
|
|
|
|
/*
|
|
* If parity occurred during the unload, then attentions and/or
|
|
* RECOVERY_IN_PROGRES may still be set. If so we want the first function
|
|
* loaded on the current engine to complete the recovery. Parity recovery
|
|
* is only relevant for PF driver.
|
|
*/
|
|
if (IS_PF(sc)) {
|
|
other_load_status = bxe_get_load_status(sc, other_engine);
|
|
load_status = bxe_get_load_status(sc, SC_PATH(sc));
|
|
|
|
if (!bxe_reset_is_done(sc, SC_PATH(sc)) ||
|
|
bxe_chk_parity_attn(sc, &global, TRUE)) {
|
|
do {
|
|
/*
|
|
* If there are attentions and they are in global blocks, set
|
|
* the GLOBAL_RESET bit regardless whether it will be this
|
|
* function that will complete the recovery or not.
|
|
*/
|
|
if (global) {
|
|
bxe_set_reset_global(sc);
|
|
}
|
|
|
|
/*
|
|
* Only the first function on the current engine should try
|
|
* to recover in open. In case of attentions in global blocks
|
|
* only the first in the chip should try to recover.
|
|
*/
|
|
if ((!load_status && (!global || !other_load_status)) &&
|
|
bxe_trylock_leader_lock(sc) && !bxe_leader_reset(sc)) {
|
|
BLOGI(sc, "Recovered during init\n");
|
|
break;
|
|
}
|
|
|
|
/* recovery has failed... */
|
|
bxe_set_power_state(sc, PCI_PM_D3hot);
|
|
sc->recovery_state = BXE_RECOVERY_FAILED;
|
|
|
|
BLOGE(sc, "Recovery flow hasn't properly "
|
|
"completed yet, try again later. "
|
|
"If you still see this message after a "
|
|
"few retries then power cycle is required.\n");
|
|
|
|
rc = ENXIO;
|
|
goto bxe_init_locked_done;
|
|
} while (0);
|
|
}
|
|
}
|
|
|
|
sc->recovery_state = BXE_RECOVERY_DONE;
|
|
|
|
rc = bxe_nic_load(sc, LOAD_OPEN);
|
|
|
|
bxe_init_locked_done:
|
|
|
|
if (rc) {
|
|
/* Tell the stack the driver is NOT running! */
|
|
BLOGE(sc, "Initialization failed, "
|
|
"stack notified driver is NOT running!\n");
|
|
if_setdrvflagbits(sc->ifp, 0, IFF_DRV_RUNNING);
|
|
}
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static int
|
|
bxe_stop_locked(struct bxe_softc *sc)
|
|
{
|
|
BXE_CORE_LOCK_ASSERT(sc);
|
|
return (bxe_nic_unload(sc, UNLOAD_NORMAL, TRUE));
|
|
}
|
|
|
|
/*
|
|
* Handles controller initialization when called from an unlocked routine.
|
|
* ifconfig calls this function.
|
|
*
|
|
* Returns:
|
|
* void
|
|
*/
|
|
static void
|
|
bxe_init(void *xsc)
|
|
{
|
|
struct bxe_softc *sc = (struct bxe_softc *)xsc;
|
|
|
|
BXE_CORE_LOCK(sc);
|
|
bxe_init_locked(sc);
|
|
BXE_CORE_UNLOCK(sc);
|
|
}
|
|
|
|
static int
|
|
bxe_init_ifnet(struct bxe_softc *sc)
|
|
{
|
|
if_t ifp;
|
|
int capabilities;
|
|
|
|
/* ifconfig entrypoint for media type/status reporting */
|
|
ifmedia_init(&sc->ifmedia, IFM_IMASK,
|
|
bxe_ifmedia_update,
|
|
bxe_ifmedia_status);
|
|
|
|
/* set the default interface values */
|
|
ifmedia_add(&sc->ifmedia, (IFM_ETHER | IFM_FDX | sc->media), 0, NULL);
|
|
ifmedia_add(&sc->ifmedia, (IFM_ETHER | IFM_AUTO), 0, NULL);
|
|
ifmedia_set(&sc->ifmedia, (IFM_ETHER | IFM_AUTO));
|
|
|
|
sc->ifmedia.ifm_media = sc->ifmedia.ifm_cur->ifm_media; /* XXX ? */
|
|
|
|
/* allocate the ifnet structure */
|
|
if ((ifp = if_gethandle(IFT_ETHER)) == NULL) {
|
|
BLOGE(sc, "Interface allocation failed!\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
if_setsoftc(ifp, sc);
|
|
if_initname_drv(ifp, device_get_name(sc->dev), device_get_unit(sc->dev));
|
|
if_setflags(ifp, (IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST));
|
|
if_setioctlfn(ifp, bxe_ioctl);
|
|
if_setstartfn(ifp, bxe_tx_start);
|
|
#if __FreeBSD_version >= 800000
|
|
if_settransmitfn(ifp, bxe_tx_mq_start);
|
|
if_setqflushfn(ifp, bxe_mq_flush);
|
|
#endif
|
|
#ifdef FreeBSD8_0
|
|
if_settimer(ifp, 0);
|
|
#endif
|
|
if_setinitfn(ifp, bxe_init);
|
|
if_setmtu(ifp, sc->mtu);
|
|
if_sethwassist(ifp, (CSUM_IP |
|
|
CSUM_TCP |
|
|
CSUM_UDP |
|
|
CSUM_TSO |
|
|
CSUM_TCP_IPV6 |
|
|
CSUM_UDP_IPV6));
|
|
|
|
capabilities =
|
|
#if __FreeBSD_version < 700000
|
|
(IFCAP_VLAN_MTU |
|
|
IFCAP_VLAN_HWTAGGING |
|
|
IFCAP_HWCSUM |
|
|
IFCAP_JUMBO_MTU |
|
|
IFCAP_LRO);
|
|
#else
|
|
(IFCAP_VLAN_MTU |
|
|
IFCAP_VLAN_HWTAGGING |
|
|
IFCAP_VLAN_HWTSO |
|
|
IFCAP_VLAN_HWFILTER |
|
|
IFCAP_VLAN_HWCSUM |
|
|
IFCAP_HWCSUM |
|
|
IFCAP_JUMBO_MTU |
|
|
IFCAP_LRO |
|
|
IFCAP_TSO4 |
|
|
IFCAP_TSO6 |
|
|
IFCAP_WOL_MAGIC);
|
|
#endif
|
|
if_setcapabilitiesbit(ifp, capabilities, 0); /* XXX */
|
|
if_setbaudrate(ifp, IF_Gbps(10));
|
|
/* XXX */
|
|
if_setsendqlen(ifp, sc->tx_ring_size);
|
|
if_setsendqready(ifp);
|
|
/* XXX */
|
|
|
|
sc->ifp = ifp;
|
|
|
|
/* attach to the Ethernet interface list */
|
|
ether_ifattach_drv(ifp, sc->link_params.mac_addr);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bxe_deallocate_bars(struct bxe_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < MAX_BARS; i++) {
|
|
if (sc->bar[i].resource != NULL) {
|
|
bus_release_resource(sc->dev,
|
|
SYS_RES_MEMORY,
|
|
sc->bar[i].rid,
|
|
sc->bar[i].resource);
|
|
BLOGD(sc, DBG_LOAD, "Released PCI BAR%d [%02x] memory\n",
|
|
i, PCIR_BAR(i));
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
bxe_allocate_bars(struct bxe_softc *sc)
|
|
{
|
|
u_int flags;
|
|
int i;
|
|
|
|
memset(sc->bar, 0, sizeof(sc->bar));
|
|
|
|
for (i = 0; i < MAX_BARS; i++) {
|
|
|
|
/* memory resources reside at BARs 0, 2, 4 */
|
|
/* Run `pciconf -lb` to see mappings */
|
|
if ((i != 0) && (i != 2) && (i != 4)) {
|
|
continue;
|
|
}
|
|
|
|
sc->bar[i].rid = PCIR_BAR(i);
|
|
|
|
flags = RF_ACTIVE;
|
|
if (i == 0) {
|
|
flags |= RF_SHAREABLE;
|
|
}
|
|
|
|
if ((sc->bar[i].resource =
|
|
bus_alloc_resource_any(sc->dev,
|
|
SYS_RES_MEMORY,
|
|
&sc->bar[i].rid,
|
|
flags)) == NULL) {
|
|
#if 0
|
|
/* BAR4 doesn't exist for E1 */
|
|
BLOGE(sc, "PCI BAR%d [%02x] memory allocation failed\n",
|
|
i, PCIR_BAR(i));
|
|
#endif
|
|
return (0);
|
|
}
|
|
|
|
sc->bar[i].tag = rman_get_bustag(sc->bar[i].resource);
|
|
sc->bar[i].handle = rman_get_bushandle(sc->bar[i].resource);
|
|
sc->bar[i].kva = (vm_offset_t)rman_get_virtual(sc->bar[i].resource);
|
|
|
|
BLOGI(sc, "PCI BAR%d [%02x] memory allocated: %p-%p (%ld) -> %p\n",
|
|
i, PCIR_BAR(i),
|
|
(void *)rman_get_start(sc->bar[i].resource),
|
|
(void *)rman_get_end(sc->bar[i].resource),
|
|
rman_get_size(sc->bar[i].resource),
|
|
(void *)sc->bar[i].kva);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bxe_get_function_num(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val = 0;
|
|
|
|
/*
|
|
* Read the ME register to get the function number. The ME register
|
|
* holds the relative-function number and absolute-function number. The
|
|
* absolute-function number appears only in E2 and above. Before that
|
|
* these bits always contained zero, therefore we cannot blindly use them.
|
|
*/
|
|
|
|
val = REG_RD(sc, BAR_ME_REGISTER);
|
|
|
|
sc->pfunc_rel =
|
|
(uint8_t)((val & ME_REG_PF_NUM) >> ME_REG_PF_NUM_SHIFT);
|
|
sc->path_id =
|
|
(uint8_t)((val & ME_REG_ABS_PF_NUM) >> ME_REG_ABS_PF_NUM_SHIFT) & 1;
|
|
|
|
if (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) {
|
|
sc->pfunc_abs = ((sc->pfunc_rel << 1) | sc->path_id);
|
|
} else {
|
|
sc->pfunc_abs = (sc->pfunc_rel | sc->path_id);
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD,
|
|
"Relative function %d, Absolute function %d, Path %d\n",
|
|
sc->pfunc_rel, sc->pfunc_abs, sc->path_id);
|
|
}
|
|
|
|
static uint32_t
|
|
bxe_get_shmem_mf_cfg_base(struct bxe_softc *sc)
|
|
{
|
|
uint32_t shmem2_size;
|
|
uint32_t offset;
|
|
uint32_t mf_cfg_offset_value;
|
|
|
|
/* Non 57712 */
|
|
offset = (SHMEM_RD(sc, func_mb) +
|
|
(MAX_FUNC_NUM * sizeof(struct drv_func_mb)));
|
|
|
|
/* 57712 plus */
|
|
if (sc->devinfo.shmem2_base != 0) {
|
|
shmem2_size = SHMEM2_RD(sc, size);
|
|
if (shmem2_size > offsetof(struct shmem2_region, mf_cfg_addr)) {
|
|
mf_cfg_offset_value = SHMEM2_RD(sc, mf_cfg_addr);
|
|
if (SHMEM_MF_CFG_ADDR_NONE != mf_cfg_offset_value) {
|
|
offset = mf_cfg_offset_value;
|
|
}
|
|
}
|
|
}
|
|
|
|
return (offset);
|
|
}
|
|
|
|
static uint32_t
|
|
bxe_pcie_capability_read(struct bxe_softc *sc,
|
|
int reg,
|
|
int width)
|
|
{
|
|
int pcie_reg;
|
|
|
|
/* ensure PCIe capability is enabled */
|
|
if (pci_find_cap(sc->dev, PCIY_EXPRESS, &pcie_reg) == 0) {
|
|
if (pcie_reg != 0) {
|
|
BLOGD(sc, DBG_LOAD, "PCIe capability at 0x%04x\n", pcie_reg);
|
|
return (pci_read_config(sc->dev, (pcie_reg + reg), width));
|
|
}
|
|
}
|
|
|
|
BLOGE(sc, "PCIe capability NOT FOUND!!!\n");
|
|
|
|
return (0);
|
|
}
|
|
|
|
static uint8_t
|
|
bxe_is_pcie_pending(struct bxe_softc *sc)
|
|
{
|
|
return (bxe_pcie_capability_read(sc, PCIR_EXPRESS_DEVICE_STA, 2) &
|
|
PCIM_EXP_STA_TRANSACTION_PND);
|
|
}
|
|
|
|
/*
|
|
* Walk the PCI capabiites list for the device to find what features are
|
|
* supported. These capabilites may be enabled/disabled by firmware so it's
|
|
* best to walk the list rather than make assumptions.
|
|
*/
|
|
static void
|
|
bxe_probe_pci_caps(struct bxe_softc *sc)
|
|
{
|
|
uint16_t link_status;
|
|
int reg;
|
|
|
|
/* check if PCI Power Management is enabled */
|
|
if (pci_find_cap(sc->dev, PCIY_PMG, ®) == 0) {
|
|
if (reg != 0) {
|
|
BLOGD(sc, DBG_LOAD, "Found PM capability at 0x%04x\n", reg);
|
|
|
|
sc->devinfo.pcie_cap_flags |= BXE_PM_CAPABLE_FLAG;
|
|
sc->devinfo.pcie_pm_cap_reg = (uint16_t)reg;
|
|
}
|
|
}
|
|
|
|
link_status = bxe_pcie_capability_read(sc, PCIR_EXPRESS_LINK_STA, 2);
|
|
|
|
/* handle PCIe 2.0 workarounds for 57710 */
|
|
if (CHIP_IS_E1(sc)) {
|
|
/* workaround for 57710 errata E4_57710_27462 */
|
|
sc->devinfo.pcie_link_speed =
|
|
(REG_RD(sc, 0x3d04) & (1 << 24)) ? 2 : 1;
|
|
|
|
/* workaround for 57710 errata E4_57710_27488 */
|
|
sc->devinfo.pcie_link_width =
|
|
((link_status & PCIM_LINK_STA_WIDTH) >> 4);
|
|
if (sc->devinfo.pcie_link_speed > 1) {
|
|
sc->devinfo.pcie_link_width =
|
|
((link_status & PCIM_LINK_STA_WIDTH) >> 4) >> 1;
|
|
}
|
|
} else {
|
|
sc->devinfo.pcie_link_speed =
|
|
(link_status & PCIM_LINK_STA_SPEED);
|
|
sc->devinfo.pcie_link_width =
|
|
((link_status & PCIM_LINK_STA_WIDTH) >> 4);
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "PCIe link speed=%d width=%d\n",
|
|
sc->devinfo.pcie_link_speed, sc->devinfo.pcie_link_width);
|
|
|
|
sc->devinfo.pcie_cap_flags |= BXE_PCIE_CAPABLE_FLAG;
|
|
sc->devinfo.pcie_pcie_cap_reg = (uint16_t)reg;
|
|
|
|
/* check if MSI capability is enabled */
|
|
if (pci_find_cap(sc->dev, PCIY_MSI, ®) == 0) {
|
|
if (reg != 0) {
|
|
BLOGD(sc, DBG_LOAD, "Found MSI capability at 0x%04x\n", reg);
|
|
|
|
sc->devinfo.pcie_cap_flags |= BXE_MSI_CAPABLE_FLAG;
|
|
sc->devinfo.pcie_msi_cap_reg = (uint16_t)reg;
|
|
}
|
|
}
|
|
|
|
/* check if MSI-X capability is enabled */
|
|
if (pci_find_cap(sc->dev, PCIY_MSIX, ®) == 0) {
|
|
if (reg != 0) {
|
|
BLOGD(sc, DBG_LOAD, "Found MSI-X capability at 0x%04x\n", reg);
|
|
|
|
sc->devinfo.pcie_cap_flags |= BXE_MSIX_CAPABLE_FLAG;
|
|
sc->devinfo.pcie_msix_cap_reg = (uint16_t)reg;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
bxe_get_shmem_mf_cfg_info_sd(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_mf_info *mf_info = &sc->devinfo.mf_info;
|
|
uint32_t val;
|
|
|
|
/* get the outer vlan if we're in switch-dependent mode */
|
|
|
|
val = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
|
|
mf_info->ext_id = (uint16_t)val;
|
|
|
|
mf_info->multi_vnics_mode = 1;
|
|
|
|
if (!VALID_OVLAN(mf_info->ext_id)) {
|
|
BLOGE(sc, "Invalid VLAN (%d)\n", mf_info->ext_id);
|
|
return (1);
|
|
}
|
|
|
|
/* get the capabilities */
|
|
if ((mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_PROTOCOL_MASK) ==
|
|
FUNC_MF_CFG_PROTOCOL_ISCSI) {
|
|
mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_ISCSI;
|
|
} else if ((mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_PROTOCOL_MASK) ==
|
|
FUNC_MF_CFG_PROTOCOL_FCOE) {
|
|
mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_FCOE;
|
|
} else {
|
|
mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_ETHERNET;
|
|
}
|
|
|
|
mf_info->vnics_per_port =
|
|
(CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static uint32_t
|
|
bxe_get_shmem_ext_proto_support_flags(struct bxe_softc *sc)
|
|
{
|
|
uint32_t retval = 0;
|
|
uint32_t val;
|
|
|
|
val = MFCFG_RD(sc, func_ext_config[SC_ABS_FUNC(sc)].func_cfg);
|
|
|
|
if (val & MACP_FUNC_CFG_FLAGS_ENABLED) {
|
|
if (val & MACP_FUNC_CFG_FLAGS_ETHERNET) {
|
|
retval |= MF_PROTO_SUPPORT_ETHERNET;
|
|
}
|
|
if (val & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) {
|
|
retval |= MF_PROTO_SUPPORT_ISCSI;
|
|
}
|
|
if (val & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) {
|
|
retval |= MF_PROTO_SUPPORT_FCOE;
|
|
}
|
|
}
|
|
|
|
return (retval);
|
|
}
|
|
|
|
static int
|
|
bxe_get_shmem_mf_cfg_info_si(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_mf_info *mf_info = &sc->devinfo.mf_info;
|
|
uint32_t val;
|
|
|
|
/*
|
|
* There is no outer vlan if we're in switch-independent mode.
|
|
* If the mac is valid then assume multi-function.
|
|
*/
|
|
|
|
val = MFCFG_RD(sc, func_ext_config[SC_ABS_FUNC(sc)].func_cfg);
|
|
|
|
mf_info->multi_vnics_mode = ((val & MACP_FUNC_CFG_FLAGS_MASK) != 0);
|
|
|
|
mf_info->mf_protos_supported = bxe_get_shmem_ext_proto_support_flags(sc);
|
|
|
|
mf_info->vnics_per_port =
|
|
(CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bxe_get_shmem_mf_cfg_info_niv(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_mf_info *mf_info = &sc->devinfo.mf_info;
|
|
uint32_t e1hov_tag;
|
|
uint32_t func_config;
|
|
uint32_t niv_config;
|
|
|
|
mf_info->multi_vnics_mode = 1;
|
|
|
|
e1hov_tag = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
|
|
func_config = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].config);
|
|
niv_config = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].afex_config);
|
|
|
|
mf_info->ext_id =
|
|
(uint16_t)((e1hov_tag & FUNC_MF_CFG_E1HOV_TAG_MASK) >>
|
|
FUNC_MF_CFG_E1HOV_TAG_SHIFT);
|
|
|
|
mf_info->default_vlan =
|
|
(uint16_t)((e1hov_tag & FUNC_MF_CFG_AFEX_VLAN_MASK) >>
|
|
FUNC_MF_CFG_AFEX_VLAN_SHIFT);
|
|
|
|
mf_info->niv_allowed_priorities =
|
|
(uint8_t)((niv_config & FUNC_MF_CFG_AFEX_COS_FILTER_MASK) >>
|
|
FUNC_MF_CFG_AFEX_COS_FILTER_SHIFT);
|
|
|
|
mf_info->niv_default_cos =
|
|
(uint8_t)((func_config & FUNC_MF_CFG_TRANSMIT_PRIORITY_MASK) >>
|
|
FUNC_MF_CFG_TRANSMIT_PRIORITY_SHIFT);
|
|
|
|
mf_info->afex_vlan_mode =
|
|
((niv_config & FUNC_MF_CFG_AFEX_VLAN_MODE_MASK) >>
|
|
FUNC_MF_CFG_AFEX_VLAN_MODE_SHIFT);
|
|
|
|
mf_info->niv_mba_enabled =
|
|
((niv_config & FUNC_MF_CFG_AFEX_MBA_ENABLED_MASK) >>
|
|
FUNC_MF_CFG_AFEX_MBA_ENABLED_SHIFT);
|
|
|
|
mf_info->mf_protos_supported = bxe_get_shmem_ext_proto_support_flags(sc);
|
|
|
|
mf_info->vnics_per_port =
|
|
(CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bxe_check_valid_mf_cfg(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_mf_info *mf_info = &sc->devinfo.mf_info;
|
|
uint32_t mf_cfg1;
|
|
uint32_t mf_cfg2;
|
|
uint32_t ovlan1;
|
|
uint32_t ovlan2;
|
|
uint8_t i, j;
|
|
|
|
BLOGD(sc, DBG_LOAD, "MF config parameters for function %d\n",
|
|
SC_PORT(sc));
|
|
BLOGD(sc, DBG_LOAD, "\tmf_config=0x%x\n",
|
|
mf_info->mf_config[SC_VN(sc)]);
|
|
BLOGD(sc, DBG_LOAD, "\tmulti_vnics_mode=%d\n",
|
|
mf_info->multi_vnics_mode);
|
|
BLOGD(sc, DBG_LOAD, "\tvnics_per_port=%d\n",
|
|
mf_info->vnics_per_port);
|
|
BLOGD(sc, DBG_LOAD, "\tovlan/vifid=%d\n",
|
|
mf_info->ext_id);
|
|
BLOGD(sc, DBG_LOAD, "\tmin_bw=%d/%d/%d/%d\n",
|
|
mf_info->min_bw[0], mf_info->min_bw[1],
|
|
mf_info->min_bw[2], mf_info->min_bw[3]);
|
|
BLOGD(sc, DBG_LOAD, "\tmax_bw=%d/%d/%d/%d\n",
|
|
mf_info->max_bw[0], mf_info->max_bw[1],
|
|
mf_info->max_bw[2], mf_info->max_bw[3]);
|
|
BLOGD(sc, DBG_LOAD, "\tmac_addr: %s\n",
|
|
sc->mac_addr_str);
|
|
|
|
/* various MF mode sanity checks... */
|
|
|
|
if (mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_FUNC_HIDE) {
|
|
BLOGE(sc, "Enumerated function %d is marked as hidden\n",
|
|
SC_PORT(sc));
|
|
return (1);
|
|
}
|
|
|
|
if ((mf_info->vnics_per_port > 1) && !mf_info->multi_vnics_mode) {
|
|
BLOGE(sc, "vnics_per_port=%d multi_vnics_mode=%d\n",
|
|
mf_info->vnics_per_port, mf_info->multi_vnics_mode);
|
|
return (1);
|
|
}
|
|
|
|
if (mf_info->mf_mode == MULTI_FUNCTION_SD) {
|
|
/* vnic id > 0 must have valid ovlan in switch-dependent mode */
|
|
if ((SC_VN(sc) > 0) && !VALID_OVLAN(OVLAN(sc))) {
|
|
BLOGE(sc, "mf_mode=SD vnic_id=%d ovlan=%d\n",
|
|
SC_VN(sc), OVLAN(sc));
|
|
return (1);
|
|
}
|
|
|
|
if (!VALID_OVLAN(OVLAN(sc)) && mf_info->multi_vnics_mode) {
|
|
BLOGE(sc, "mf_mode=SD multi_vnics_mode=%d ovlan=%d\n",
|
|
mf_info->multi_vnics_mode, OVLAN(sc));
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Verify all functions are either MF or SF mode. If MF, make sure
|
|
* sure that all non-hidden functions have a valid ovlan. If SF,
|
|
* make sure that all non-hidden functions have an invalid ovlan.
|
|
*/
|
|
FOREACH_ABS_FUNC_IN_PORT(sc, i) {
|
|
mf_cfg1 = MFCFG_RD(sc, func_mf_config[i].config);
|
|
ovlan1 = MFCFG_RD(sc, func_mf_config[i].e1hov_tag);
|
|
if (!(mf_cfg1 & FUNC_MF_CFG_FUNC_HIDE) &&
|
|
(((mf_info->multi_vnics_mode) && !VALID_OVLAN(ovlan1)) ||
|
|
((!mf_info->multi_vnics_mode) && VALID_OVLAN(ovlan1)))) {
|
|
BLOGE(sc, "mf_mode=SD function %d MF config "
|
|
"mismatch, multi_vnics_mode=%d ovlan=%d\n",
|
|
i, mf_info->multi_vnics_mode, ovlan1);
|
|
return (1);
|
|
}
|
|
}
|
|
|
|
/* Verify all funcs on the same port each have a different ovlan. */
|
|
FOREACH_ABS_FUNC_IN_PORT(sc, i) {
|
|
mf_cfg1 = MFCFG_RD(sc, func_mf_config[i].config);
|
|
ovlan1 = MFCFG_RD(sc, func_mf_config[i].e1hov_tag);
|
|
/* iterate from the next function on the port to the max func */
|
|
for (j = i + 2; j < MAX_FUNC_NUM; j += 2) {
|
|
mf_cfg2 = MFCFG_RD(sc, func_mf_config[j].config);
|
|
ovlan2 = MFCFG_RD(sc, func_mf_config[j].e1hov_tag);
|
|
if (!(mf_cfg1 & FUNC_MF_CFG_FUNC_HIDE) &&
|
|
VALID_OVLAN(ovlan1) &&
|
|
!(mf_cfg2 & FUNC_MF_CFG_FUNC_HIDE) &&
|
|
VALID_OVLAN(ovlan2) &&
|
|
(ovlan1 == ovlan2)) {
|
|
BLOGE(sc, "mf_mode=SD functions %d and %d "
|
|
"have the same ovlan (%d)\n",
|
|
i, j, ovlan1);
|
|
return (1);
|
|
}
|
|
}
|
|
}
|
|
} /* MULTI_FUNCTION_SD */
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bxe_get_mf_cfg_info(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_mf_info *mf_info = &sc->devinfo.mf_info;
|
|
uint32_t val, mac_upper;
|
|
uint8_t i, vnic;
|
|
|
|
/* initialize mf_info defaults */
|
|
mf_info->vnics_per_port = 1;
|
|
mf_info->multi_vnics_mode = FALSE;
|
|
mf_info->path_has_ovlan = FALSE;
|
|
mf_info->mf_mode = SINGLE_FUNCTION;
|
|
|
|
if (!CHIP_IS_MF_CAP(sc)) {
|
|
return (0);
|
|
}
|
|
|
|
if (sc->devinfo.mf_cfg_base == SHMEM_MF_CFG_ADDR_NONE) {
|
|
BLOGE(sc, "Invalid mf_cfg_base!\n");
|
|
return (1);
|
|
}
|
|
|
|
/* get the MF mode (switch dependent / independent / single-function) */
|
|
|
|
val = SHMEM_RD(sc, dev_info.shared_feature_config.config);
|
|
|
|
switch (val & SHARED_FEAT_CFG_FORCE_SF_MODE_MASK)
|
|
{
|
|
case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT:
|
|
|
|
mac_upper = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
|
|
|
|
/* check for legal upper mac bytes */
|
|
if (mac_upper != FUNC_MF_CFG_UPPERMAC_DEFAULT) {
|
|
mf_info->mf_mode = MULTI_FUNCTION_SI;
|
|
} else {
|
|
BLOGE(sc, "Invalid config for Switch Independent mode\n");
|
|
}
|
|
|
|
break;
|
|
|
|
case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED:
|
|
case SHARED_FEAT_CFG_FORCE_SF_MODE_SPIO4:
|
|
|
|
/* get outer vlan configuration */
|
|
val = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
|
|
|
|
if ((val & FUNC_MF_CFG_E1HOV_TAG_MASK) !=
|
|
FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
|
|
mf_info->mf_mode = MULTI_FUNCTION_SD;
|
|
} else {
|
|
BLOGE(sc, "Invalid config for Switch Dependent mode\n");
|
|
}
|
|
|
|
break;
|
|
|
|
case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF:
|
|
|
|
/* not in MF mode, vnics_per_port=1 and multi_vnics_mode=FALSE */
|
|
return (0);
|
|
|
|
case SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE:
|
|
|
|
/*
|
|
* Mark MF mode as NIV if MCP version includes NPAR-SD support
|
|
* and the MAC address is valid.
|
|
*/
|
|
mac_upper = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
|
|
|
|
if ((SHMEM2_HAS(sc, afex_driver_support)) &&
|
|
(mac_upper != FUNC_MF_CFG_UPPERMAC_DEFAULT)) {
|
|
mf_info->mf_mode = MULTI_FUNCTION_AFEX;
|
|
} else {
|
|
BLOGE(sc, "Invalid config for AFEX mode\n");
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
BLOGE(sc, "Unknown MF mode (0x%08x)\n",
|
|
(val & SHARED_FEAT_CFG_FORCE_SF_MODE_MASK));
|
|
|
|
return (1);
|
|
}
|
|
|
|
/* set path mf_mode (which could be different than function mf_mode) */
|
|
if (mf_info->mf_mode == MULTI_FUNCTION_SD) {
|
|
mf_info->path_has_ovlan = TRUE;
|
|
} else if (mf_info->mf_mode == SINGLE_FUNCTION) {
|
|
/*
|
|
* Decide on path multi vnics mode. If we're not in MF mode and in
|
|
* 4-port mode, this is good enough to check vnic-0 of the other port
|
|
* on the same path
|
|
*/
|
|
if (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) {
|
|
uint8_t other_port = !(PORT_ID(sc) & 1);
|
|
uint8_t abs_func_other_port = (SC_PATH(sc) + (2 * other_port));
|
|
|
|
val = MFCFG_RD(sc, func_mf_config[abs_func_other_port].e1hov_tag);
|
|
|
|
mf_info->path_has_ovlan = VALID_OVLAN((uint16_t)val) ? 1 : 0;
|
|
}
|
|
}
|
|
|
|
if (mf_info->mf_mode == SINGLE_FUNCTION) {
|
|
/* invalid MF config */
|
|
if (SC_VN(sc) >= 1) {
|
|
BLOGE(sc, "VNIC ID >= 1 in SF mode\n");
|
|
return (1);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/* get the MF configuration */
|
|
mf_info->mf_config[SC_VN(sc)] =
|
|
MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].config);
|
|
|
|
switch(mf_info->mf_mode)
|
|
{
|
|
case MULTI_FUNCTION_SD:
|
|
|
|
bxe_get_shmem_mf_cfg_info_sd(sc);
|
|
break;
|
|
|
|
case MULTI_FUNCTION_SI:
|
|
|
|
bxe_get_shmem_mf_cfg_info_si(sc);
|
|
break;
|
|
|
|
case MULTI_FUNCTION_AFEX:
|
|
|
|
bxe_get_shmem_mf_cfg_info_niv(sc);
|
|
break;
|
|
|
|
default:
|
|
|
|
BLOGE(sc, "Get MF config failed (mf_mode=0x%08x)\n",
|
|
mf_info->mf_mode);
|
|
return (1);
|
|
}
|
|
|
|
/* get the congestion management parameters */
|
|
|
|
vnic = 0;
|
|
FOREACH_ABS_FUNC_IN_PORT(sc, i) {
|
|
/* get min/max bw */
|
|
val = MFCFG_RD(sc, func_mf_config[i].config);
|
|
mf_info->min_bw[vnic] =
|
|
((val & FUNC_MF_CFG_MIN_BW_MASK) >> FUNC_MF_CFG_MIN_BW_SHIFT);
|
|
mf_info->max_bw[vnic] =
|
|
((val & FUNC_MF_CFG_MAX_BW_MASK) >> FUNC_MF_CFG_MAX_BW_SHIFT);
|
|
vnic++;
|
|
}
|
|
|
|
return (bxe_check_valid_mf_cfg(sc));
|
|
}
|
|
|
|
static int
|
|
bxe_get_shmem_info(struct bxe_softc *sc)
|
|
{
|
|
int port;
|
|
uint32_t mac_hi, mac_lo, val;
|
|
|
|
port = SC_PORT(sc);
|
|
mac_hi = mac_lo = 0;
|
|
|
|
sc->link_params.sc = sc;
|
|
sc->link_params.port = port;
|
|
|
|
/* get the hardware config info */
|
|
sc->devinfo.hw_config =
|
|
SHMEM_RD(sc, dev_info.shared_hw_config.config);
|
|
sc->devinfo.hw_config2 =
|
|
SHMEM_RD(sc, dev_info.shared_hw_config.config2);
|
|
|
|
sc->link_params.hw_led_mode =
|
|
((sc->devinfo.hw_config & SHARED_HW_CFG_LED_MODE_MASK) >>
|
|
SHARED_HW_CFG_LED_MODE_SHIFT);
|
|
|
|
/* get the port feature config */
|
|
sc->port.config =
|
|
SHMEM_RD(sc, dev_info.port_feature_config[port].config),
|
|
|
|
/* get the link params */
|
|
sc->link_params.speed_cap_mask[0] =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].speed_capability_mask);
|
|
sc->link_params.speed_cap_mask[1] =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].speed_capability_mask2);
|
|
|
|
/* get the lane config */
|
|
sc->link_params.lane_config =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].lane_config);
|
|
|
|
/* get the link config */
|
|
val = SHMEM_RD(sc, dev_info.port_feature_config[port].link_config);
|
|
sc->port.link_config[ELINK_INT_PHY] = val;
|
|
sc->link_params.switch_cfg = (val & PORT_FEATURE_CONNECTED_SWITCH_MASK);
|
|
sc->port.link_config[ELINK_EXT_PHY1] =
|
|
SHMEM_RD(sc, dev_info.port_feature_config[port].link_config2);
|
|
|
|
/* get the override preemphasis flag and enable it or turn it off */
|
|
val = SHMEM_RD(sc, dev_info.shared_feature_config.config);
|
|
if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED) {
|
|
sc->link_params.feature_config_flags |=
|
|
ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
|
|
} else {
|
|
sc->link_params.feature_config_flags &=
|
|
~ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
|
|
}
|
|
|
|
/* get the initial value of the link params */
|
|
sc->link_params.multi_phy_config =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].multi_phy_config);
|
|
|
|
/* get external phy info */
|
|
sc->port.ext_phy_config =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].external_phy_config);
|
|
|
|
/* get the multifunction configuration */
|
|
bxe_get_mf_cfg_info(sc);
|
|
|
|
/* get the mac address */
|
|
if (IS_MF(sc)) {
|
|
mac_hi = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
|
|
mac_lo = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_lower);
|
|
} else {
|
|
mac_hi = SHMEM_RD(sc, dev_info.port_hw_config[port].mac_upper);
|
|
mac_lo = SHMEM_RD(sc, dev_info.port_hw_config[port].mac_lower);
|
|
}
|
|
|
|
if ((mac_lo == 0) && (mac_hi == 0)) {
|
|
*sc->mac_addr_str = 0;
|
|
BLOGE(sc, "No Ethernet address programmed!\n");
|
|
} else {
|
|
sc->link_params.mac_addr[0] = (uint8_t)(mac_hi >> 8);
|
|
sc->link_params.mac_addr[1] = (uint8_t)(mac_hi);
|
|
sc->link_params.mac_addr[2] = (uint8_t)(mac_lo >> 24);
|
|
sc->link_params.mac_addr[3] = (uint8_t)(mac_lo >> 16);
|
|
sc->link_params.mac_addr[4] = (uint8_t)(mac_lo >> 8);
|
|
sc->link_params.mac_addr[5] = (uint8_t)(mac_lo);
|
|
snprintf(sc->mac_addr_str, sizeof(sc->mac_addr_str),
|
|
"%02x:%02x:%02x:%02x:%02x:%02x",
|
|
sc->link_params.mac_addr[0], sc->link_params.mac_addr[1],
|
|
sc->link_params.mac_addr[2], sc->link_params.mac_addr[3],
|
|
sc->link_params.mac_addr[4], sc->link_params.mac_addr[5]);
|
|
BLOGD(sc, DBG_LOAD, "Ethernet address: %s\n", sc->mac_addr_str);
|
|
}
|
|
|
|
#if 0
|
|
if (!IS_MF(sc) &&
|
|
((sc->port.config & PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK) ==
|
|
PORT_FEAT_CFG_STORAGE_PERSONALITY_FCOE)) {
|
|
sc->flags |= BXE_NO_ISCSI;
|
|
}
|
|
if (!IS_MF(sc) &&
|
|
((sc->port.config & PORT_FEAT_CFG_STORAGE_PERSONALITY_MASK) ==
|
|
PORT_FEAT_CFG_STORAGE_PERSONALITY_ISCSI)) {
|
|
sc->flags |= BXE_NO_FCOE_FLAG;
|
|
}
|
|
#endif
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bxe_get_tunable_params(struct bxe_softc *sc)
|
|
{
|
|
/* sanity checks */
|
|
|
|
if ((bxe_interrupt_mode != INTR_MODE_INTX) &&
|
|
(bxe_interrupt_mode != INTR_MODE_MSI) &&
|
|
(bxe_interrupt_mode != INTR_MODE_MSIX)) {
|
|
BLOGW(sc, "invalid interrupt_mode value (%d)\n", bxe_interrupt_mode);
|
|
bxe_interrupt_mode = INTR_MODE_MSIX;
|
|
}
|
|
|
|
if ((bxe_queue_count < 0) || (bxe_queue_count > MAX_RSS_CHAINS)) {
|
|
BLOGW(sc, "invalid queue_count value (%d)\n", bxe_queue_count);
|
|
bxe_queue_count = 0;
|
|
}
|
|
|
|
if ((bxe_max_rx_bufs < 1) || (bxe_max_rx_bufs > RX_BD_USABLE)) {
|
|
if (bxe_max_rx_bufs == 0) {
|
|
bxe_max_rx_bufs = RX_BD_USABLE;
|
|
} else {
|
|
BLOGW(sc, "invalid max_rx_bufs (%d)\n", bxe_max_rx_bufs);
|
|
bxe_max_rx_bufs = 2048;
|
|
}
|
|
}
|
|
|
|
if ((bxe_hc_rx_ticks < 1) || (bxe_hc_rx_ticks > 100)) {
|
|
BLOGW(sc, "invalid hc_rx_ticks (%d)\n", bxe_hc_rx_ticks);
|
|
bxe_hc_rx_ticks = 25;
|
|
}
|
|
|
|
if ((bxe_hc_tx_ticks < 1) || (bxe_hc_tx_ticks > 100)) {
|
|
BLOGW(sc, "invalid hc_tx_ticks (%d)\n", bxe_hc_tx_ticks);
|
|
bxe_hc_tx_ticks = 50;
|
|
}
|
|
|
|
if (bxe_max_aggregation_size == 0) {
|
|
bxe_max_aggregation_size = TPA_AGG_SIZE;
|
|
}
|
|
|
|
if (bxe_max_aggregation_size > 0xffff) {
|
|
BLOGW(sc, "invalid max_aggregation_size (%d)\n",
|
|
bxe_max_aggregation_size);
|
|
bxe_max_aggregation_size = TPA_AGG_SIZE;
|
|
}
|
|
|
|
if ((bxe_mrrs < -1) || (bxe_mrrs > 3)) {
|
|
BLOGW(sc, "invalid mrrs (%d)\n", bxe_mrrs);
|
|
bxe_mrrs = -1;
|
|
}
|
|
|
|
if ((bxe_autogreeen < 0) || (bxe_autogreeen > 2)) {
|
|
BLOGW(sc, "invalid autogreeen (%d)\n", bxe_autogreeen);
|
|
bxe_autogreeen = 0;
|
|
}
|
|
|
|
if ((bxe_udp_rss < 0) || (bxe_udp_rss > 1)) {
|
|
BLOGW(sc, "invalid udp_rss (%d)\n", bxe_udp_rss);
|
|
bxe_udp_rss = 0;
|
|
}
|
|
|
|
/* pull in user settings */
|
|
|
|
sc->interrupt_mode = bxe_interrupt_mode;
|
|
sc->max_rx_bufs = bxe_max_rx_bufs;
|
|
sc->hc_rx_ticks = bxe_hc_rx_ticks;
|
|
sc->hc_tx_ticks = bxe_hc_tx_ticks;
|
|
sc->max_aggregation_size = bxe_max_aggregation_size;
|
|
sc->mrrs = bxe_mrrs;
|
|
sc->autogreeen = bxe_autogreeen;
|
|
sc->udp_rss = bxe_udp_rss;
|
|
|
|
if (bxe_interrupt_mode == INTR_MODE_INTX) {
|
|
sc->num_queues = 1;
|
|
} else { /* INTR_MODE_MSI or INTR_MODE_MSIX */
|
|
sc->num_queues =
|
|
min((bxe_queue_count ? bxe_queue_count : mp_ncpus),
|
|
MAX_RSS_CHAINS);
|
|
if (sc->num_queues > mp_ncpus) {
|
|
sc->num_queues = mp_ncpus;
|
|
}
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD,
|
|
"User Config: "
|
|
"debug=0x%lx "
|
|
"interrupt_mode=%d "
|
|
"queue_count=%d "
|
|
"hc_rx_ticks=%d "
|
|
"hc_tx_ticks=%d "
|
|
"rx_budget=%d "
|
|
"max_aggregation_size=%d "
|
|
"mrrs=%d "
|
|
"autogreeen=%d "
|
|
"udp_rss=%d\n",
|
|
bxe_debug,
|
|
sc->interrupt_mode,
|
|
sc->num_queues,
|
|
sc->hc_rx_ticks,
|
|
sc->hc_tx_ticks,
|
|
bxe_rx_budget,
|
|
sc->max_aggregation_size,
|
|
sc->mrrs,
|
|
sc->autogreeen,
|
|
sc->udp_rss);
|
|
}
|
|
|
|
static void
|
|
bxe_media_detect(struct bxe_softc *sc)
|
|
{
|
|
uint32_t phy_idx = bxe_get_cur_phy_idx(sc);
|
|
switch (sc->link_params.phy[phy_idx].media_type) {
|
|
case ELINK_ETH_PHY_SFPP_10G_FIBER:
|
|
case ELINK_ETH_PHY_XFP_FIBER:
|
|
BLOGI(sc, "Found 10Gb Fiber media.\n");
|
|
sc->media = IFM_10G_SR;
|
|
break;
|
|
case ELINK_ETH_PHY_SFP_1G_FIBER:
|
|
BLOGI(sc, "Found 1Gb Fiber media.\n");
|
|
sc->media = IFM_1000_SX;
|
|
break;
|
|
case ELINK_ETH_PHY_KR:
|
|
case ELINK_ETH_PHY_CX4:
|
|
BLOGI(sc, "Found 10GBase-CX4 media.\n");
|
|
sc->media = IFM_10G_CX4;
|
|
break;
|
|
case ELINK_ETH_PHY_DA_TWINAX:
|
|
BLOGI(sc, "Found 10Gb Twinax media.\n");
|
|
sc->media = IFM_10G_TWINAX;
|
|
break;
|
|
case ELINK_ETH_PHY_BASE_T:
|
|
if (sc->link_params.speed_cap_mask[0] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
|
|
BLOGI(sc, "Found 10GBase-T media.\n");
|
|
sc->media = IFM_10G_T;
|
|
} else {
|
|
BLOGI(sc, "Found 1000Base-T media.\n");
|
|
sc->media = IFM_1000_T;
|
|
}
|
|
break;
|
|
case ELINK_ETH_PHY_NOT_PRESENT:
|
|
BLOGI(sc, "Media not present.\n");
|
|
sc->media = 0;
|
|
break;
|
|
case ELINK_ETH_PHY_UNSPECIFIED:
|
|
default:
|
|
BLOGI(sc, "Unknown media!\n");
|
|
sc->media = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
#define GET_FIELD(value, fname) \
|
|
(((value) & (fname##_MASK)) >> (fname##_SHIFT))
|
|
#define IGU_FID(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID)
|
|
#define IGU_VEC(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)
|
|
|
|
static int
|
|
bxe_get_igu_cam_info(struct bxe_softc *sc)
|
|
{
|
|
int pfid = SC_FUNC(sc);
|
|
int igu_sb_id;
|
|
uint32_t val;
|
|
uint8_t fid, igu_sb_cnt = 0;
|
|
|
|
sc->igu_base_sb = 0xff;
|
|
|
|
if (CHIP_INT_MODE_IS_BC(sc)) {
|
|
int vn = SC_VN(sc);
|
|
igu_sb_cnt = sc->igu_sb_cnt;
|
|
sc->igu_base_sb = ((CHIP_IS_MODE_4_PORT(sc) ? pfid : vn) *
|
|
FP_SB_MAX_E1x);
|
|
sc->igu_dsb_id = (E1HVN_MAX * FP_SB_MAX_E1x +
|
|
(CHIP_IS_MODE_4_PORT(sc) ? pfid : vn));
|
|
return (0);
|
|
}
|
|
|
|
/* IGU in normal mode - read CAM */
|
|
for (igu_sb_id = 0;
|
|
igu_sb_id < IGU_REG_MAPPING_MEMORY_SIZE;
|
|
igu_sb_id++) {
|
|
val = REG_RD(sc, IGU_REG_MAPPING_MEMORY + igu_sb_id * 4);
|
|
if (!(val & IGU_REG_MAPPING_MEMORY_VALID)) {
|
|
continue;
|
|
}
|
|
fid = IGU_FID(val);
|
|
if ((fid & IGU_FID_ENCODE_IS_PF)) {
|
|
if ((fid & IGU_FID_PF_NUM_MASK) != pfid) {
|
|
continue;
|
|
}
|
|
if (IGU_VEC(val) == 0) {
|
|
/* default status block */
|
|
sc->igu_dsb_id = igu_sb_id;
|
|
} else {
|
|
if (sc->igu_base_sb == 0xff) {
|
|
sc->igu_base_sb = igu_sb_id;
|
|
}
|
|
igu_sb_cnt++;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Due to new PF resource allocation by MFW T7.4 and above, it's optional
|
|
* that number of CAM entries will not be equal to the value advertised in
|
|
* PCI. Driver should use the minimal value of both as the actual status
|
|
* block count
|
|
*/
|
|
sc->igu_sb_cnt = min(sc->igu_sb_cnt, igu_sb_cnt);
|
|
|
|
if (igu_sb_cnt == 0) {
|
|
BLOGE(sc, "CAM configuration error\n");
|
|
return (-1);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Gather various information from the device config space, the device itself,
|
|
* shmem, and the user input.
|
|
*/
|
|
static int
|
|
bxe_get_device_info(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
int rc;
|
|
|
|
/* Get the data for the device */
|
|
sc->devinfo.vendor_id = pci_get_vendor(sc->dev);
|
|
sc->devinfo.device_id = pci_get_device(sc->dev);
|
|
sc->devinfo.subvendor_id = pci_get_subvendor(sc->dev);
|
|
sc->devinfo.subdevice_id = pci_get_subdevice(sc->dev);
|
|
|
|
/* get the chip revision (chip metal comes from pci config space) */
|
|
sc->devinfo.chip_id =
|
|
sc->link_params.chip_id =
|
|
(((REG_RD(sc, MISC_REG_CHIP_NUM) & 0xffff) << 16) |
|
|
((REG_RD(sc, MISC_REG_CHIP_REV) & 0xf) << 12) |
|
|
(((REG_RD(sc, PCICFG_OFFSET + PCI_ID_VAL3) >> 24) & 0xf) << 4) |
|
|
((REG_RD(sc, MISC_REG_BOND_ID) & 0xf) << 0));
|
|
|
|
/* force 57811 according to MISC register */
|
|
if (REG_RD(sc, MISC_REG_CHIP_TYPE) & MISC_REG_CHIP_TYPE_57811_MASK) {
|
|
if (CHIP_IS_57810(sc)) {
|
|
sc->devinfo.chip_id = ((CHIP_NUM_57811 << 16) |
|
|
(sc->devinfo.chip_id & 0x0000ffff));
|
|
} else if (CHIP_IS_57810_MF(sc)) {
|
|
sc->devinfo.chip_id = ((CHIP_NUM_57811_MF << 16) |
|
|
(sc->devinfo.chip_id & 0x0000ffff));
|
|
}
|
|
sc->devinfo.chip_id |= 0x1;
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD,
|
|
"chip_id=0x%08x (num=0x%04x rev=0x%01x metal=0x%02x bond=0x%01x)\n",
|
|
sc->devinfo.chip_id,
|
|
((sc->devinfo.chip_id >> 16) & 0xffff),
|
|
((sc->devinfo.chip_id >> 12) & 0xf),
|
|
((sc->devinfo.chip_id >> 4) & 0xff),
|
|
((sc->devinfo.chip_id >> 0) & 0xf));
|
|
|
|
val = (REG_RD(sc, 0x2874) & 0x55);
|
|
if ((sc->devinfo.chip_id & 0x1) ||
|
|
(CHIP_IS_E1(sc) && val) ||
|
|
(CHIP_IS_E1H(sc) && (val == 0x55))) {
|
|
sc->flags |= BXE_ONE_PORT_FLAG;
|
|
BLOGD(sc, DBG_LOAD, "single port device\n");
|
|
}
|
|
|
|
/* set the doorbell size */
|
|
sc->doorbell_size = (1 << BXE_DB_SHIFT);
|
|
|
|
/* determine whether the device is in 2 port or 4 port mode */
|
|
sc->devinfo.chip_port_mode = CHIP_PORT_MODE_NONE; /* E1 & E1h*/
|
|
if (CHIP_IS_E2E3(sc)) {
|
|
/*
|
|
* Read port4mode_en_ovwr[0]:
|
|
* If 1, four port mode is in port4mode_en_ovwr[1].
|
|
* If 0, four port mode is in port4mode_en[0].
|
|
*/
|
|
val = REG_RD(sc, MISC_REG_PORT4MODE_EN_OVWR);
|
|
if (val & 1) {
|
|
val = ((val >> 1) & 1);
|
|
} else {
|
|
val = REG_RD(sc, MISC_REG_PORT4MODE_EN);
|
|
}
|
|
|
|
sc->devinfo.chip_port_mode =
|
|
(val) ? CHIP_4_PORT_MODE : CHIP_2_PORT_MODE;
|
|
|
|
BLOGD(sc, DBG_LOAD, "Port mode = %s\n", (val) ? "4" : "2");
|
|
}
|
|
|
|
/* get the function and path info for the device */
|
|
bxe_get_function_num(sc);
|
|
|
|
/* get the shared memory base address */
|
|
sc->devinfo.shmem_base =
|
|
sc->link_params.shmem_base =
|
|
REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
|
|
sc->devinfo.shmem2_base =
|
|
REG_RD(sc, (SC_PATH(sc) ? MISC_REG_GENERIC_CR_1 :
|
|
MISC_REG_GENERIC_CR_0));
|
|
|
|
BLOGD(sc, DBG_LOAD, "shmem_base=0x%08x, shmem2_base=0x%08x\n",
|
|
sc->devinfo.shmem_base, sc->devinfo.shmem2_base);
|
|
|
|
if (!sc->devinfo.shmem_base) {
|
|
/* this should ONLY prevent upcoming shmem reads */
|
|
BLOGI(sc, "MCP not active\n");
|
|
sc->flags |= BXE_NO_MCP_FLAG;
|
|
return (0);
|
|
}
|
|
|
|
/* make sure the shared memory contents are valid */
|
|
val = SHMEM_RD(sc, validity_map[SC_PORT(sc)]);
|
|
if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) !=
|
|
(SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) {
|
|
BLOGE(sc, "Invalid SHMEM validity signature: 0x%08x\n", val);
|
|
return (0);
|
|
}
|
|
BLOGD(sc, DBG_LOAD, "Valid SHMEM validity signature: 0x%08x\n", val);
|
|
|
|
/* get the bootcode version */
|
|
sc->devinfo.bc_ver = SHMEM_RD(sc, dev_info.bc_rev);
|
|
snprintf(sc->devinfo.bc_ver_str,
|
|
sizeof(sc->devinfo.bc_ver_str),
|
|
"%d.%d.%d",
|
|
((sc->devinfo.bc_ver >> 24) & 0xff),
|
|
((sc->devinfo.bc_ver >> 16) & 0xff),
|
|
((sc->devinfo.bc_ver >> 8) & 0xff));
|
|
BLOGD(sc, DBG_LOAD, "Bootcode version: %s\n", sc->devinfo.bc_ver_str);
|
|
|
|
/* get the bootcode shmem address */
|
|
sc->devinfo.mf_cfg_base = bxe_get_shmem_mf_cfg_base(sc);
|
|
BLOGD(sc, DBG_LOAD, "mf_cfg_base=0x08%x \n", sc->devinfo.mf_cfg_base);
|
|
|
|
/* clean indirect addresses as they're not used */
|
|
pci_write_config(sc->dev, PCICFG_GRC_ADDRESS, 0, 4);
|
|
if (IS_PF(sc)) {
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_88_F0, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_8C_F0, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_90_F0, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_94_F0, 0);
|
|
if (CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_88_F1, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_8C_F1, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_90_F1, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_94_F1, 0);
|
|
}
|
|
|
|
/*
|
|
* Enable internal target-read (in case we are probed after PF
|
|
* FLR). Must be done prior to any BAR read access. Only for
|
|
* 57712 and up
|
|
*/
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
|
|
}
|
|
}
|
|
|
|
/* get the nvram size */
|
|
val = REG_RD(sc, MCP_REG_MCPR_NVM_CFG4);
|
|
sc->devinfo.flash_size =
|
|
(NVRAM_1MB_SIZE << (val & MCPR_NVM_CFG4_FLASH_SIZE));
|
|
BLOGD(sc, DBG_LOAD, "nvram flash size: %d\n", sc->devinfo.flash_size);
|
|
|
|
/* get PCI capabilites */
|
|
bxe_probe_pci_caps(sc);
|
|
|
|
bxe_set_power_state(sc, PCI_PM_D0);
|
|
|
|
/* get various configuration parameters from shmem */
|
|
bxe_get_shmem_info(sc);
|
|
|
|
if (sc->devinfo.pcie_msix_cap_reg != 0) {
|
|
val = pci_read_config(sc->dev,
|
|
(sc->devinfo.pcie_msix_cap_reg +
|
|
PCIR_MSIX_CTRL),
|
|
2);
|
|
sc->igu_sb_cnt = (val & PCIM_MSIXCTRL_TABLE_SIZE);
|
|
} else {
|
|
sc->igu_sb_cnt = 1;
|
|
}
|
|
|
|
sc->igu_base_addr = BAR_IGU_INTMEM;
|
|
|
|
/* initialize IGU parameters */
|
|
if (CHIP_IS_E1x(sc)) {
|
|
sc->devinfo.int_block = INT_BLOCK_HC;
|
|
sc->igu_dsb_id = DEF_SB_IGU_ID;
|
|
sc->igu_base_sb = 0;
|
|
} else {
|
|
sc->devinfo.int_block = INT_BLOCK_IGU;
|
|
|
|
/* do not allow device reset during IGU info preocessing */
|
|
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
|
|
|
|
val = REG_RD(sc, IGU_REG_BLOCK_CONFIGURATION);
|
|
|
|
if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
|
|
int tout = 5000;
|
|
|
|
BLOGD(sc, DBG_LOAD, "FORCING IGU Normal Mode\n");
|
|
|
|
val &= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN);
|
|
REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION, val);
|
|
REG_WR(sc, IGU_REG_RESET_MEMORIES, 0x7f);
|
|
|
|
while (tout && REG_RD(sc, IGU_REG_RESET_MEMORIES)) {
|
|
tout--;
|
|
DELAY(1000);
|
|
}
|
|
|
|
if (REG_RD(sc, IGU_REG_RESET_MEMORIES)) {
|
|
BLOGD(sc, DBG_LOAD, "FORCING IGU Normal Mode failed!!!\n");
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
|
|
return (-1);
|
|
}
|
|
}
|
|
|
|
if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
|
|
BLOGD(sc, DBG_LOAD, "IGU Backward Compatible Mode\n");
|
|
sc->devinfo.int_block |= INT_BLOCK_MODE_BW_COMP;
|
|
} else {
|
|
BLOGD(sc, DBG_LOAD, "IGU Normal Mode\n");
|
|
}
|
|
|
|
rc = bxe_get_igu_cam_info(sc);
|
|
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
|
|
|
|
if (rc) {
|
|
return (rc);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Get base FW non-default (fast path) status block ID. This value is
|
|
* used to initialize the fw_sb_id saved on the fp/queue structure to
|
|
* determine the id used by the FW.
|
|
*/
|
|
if (CHIP_IS_E1x(sc)) {
|
|
sc->base_fw_ndsb = ((SC_PORT(sc) * FP_SB_MAX_E1x) + SC_L_ID(sc));
|
|
} else {
|
|
/*
|
|
* 57712+ - We currently use one FW SB per IGU SB (Rx and Tx of
|
|
* the same queue are indicated on the same IGU SB). So we prefer
|
|
* FW and IGU SBs to be the same value.
|
|
*/
|
|
sc->base_fw_ndsb = sc->igu_base_sb;
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD,
|
|
"igu_dsb_id=%d igu_base_sb=%d igu_sb_cnt=%d base_fw_ndsb=%d\n",
|
|
sc->igu_dsb_id, sc->igu_base_sb,
|
|
sc->igu_sb_cnt, sc->base_fw_ndsb);
|
|
|
|
elink_phy_probe(&sc->link_params);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bxe_link_settings_supported(struct bxe_softc *sc,
|
|
uint32_t switch_cfg)
|
|
{
|
|
uint32_t cfg_size = 0;
|
|
uint32_t idx;
|
|
uint8_t port = SC_PORT(sc);
|
|
|
|
/* aggregation of supported attributes of all external phys */
|
|
sc->port.supported[0] = 0;
|
|
sc->port.supported[1] = 0;
|
|
|
|
switch (sc->link_params.num_phys) {
|
|
case 1:
|
|
sc->port.supported[0] = sc->link_params.phy[ELINK_INT_PHY].supported;
|
|
cfg_size = 1;
|
|
break;
|
|
case 2:
|
|
sc->port.supported[0] = sc->link_params.phy[ELINK_EXT_PHY1].supported;
|
|
cfg_size = 1;
|
|
break;
|
|
case 3:
|
|
if (sc->link_params.multi_phy_config &
|
|
PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
|
|
sc->port.supported[1] =
|
|
sc->link_params.phy[ELINK_EXT_PHY1].supported;
|
|
sc->port.supported[0] =
|
|
sc->link_params.phy[ELINK_EXT_PHY2].supported;
|
|
} else {
|
|
sc->port.supported[0] =
|
|
sc->link_params.phy[ELINK_EXT_PHY1].supported;
|
|
sc->port.supported[1] =
|
|
sc->link_params.phy[ELINK_EXT_PHY2].supported;
|
|
}
|
|
cfg_size = 2;
|
|
break;
|
|
}
|
|
|
|
if (!(sc->port.supported[0] || sc->port.supported[1])) {
|
|
BLOGE(sc, "Invalid phy config in NVRAM (PHY1=0x%08x PHY2=0x%08x)\n",
|
|
SHMEM_RD(sc,
|
|
dev_info.port_hw_config[port].external_phy_config),
|
|
SHMEM_RD(sc,
|
|
dev_info.port_hw_config[port].external_phy_config2));
|
|
return;
|
|
}
|
|
|
|
if (CHIP_IS_E3(sc))
|
|
sc->port.phy_addr = REG_RD(sc, MISC_REG_WC0_CTRL_PHY_ADDR);
|
|
else {
|
|
switch (switch_cfg) {
|
|
case ELINK_SWITCH_CFG_1G:
|
|
sc->port.phy_addr =
|
|
REG_RD(sc, NIG_REG_SERDES0_CTRL_PHY_ADDR + port*0x10);
|
|
break;
|
|
case ELINK_SWITCH_CFG_10G:
|
|
sc->port.phy_addr =
|
|
REG_RD(sc, NIG_REG_XGXS0_CTRL_PHY_ADDR + port*0x18);
|
|
break;
|
|
default:
|
|
BLOGE(sc, "Invalid switch config in link_config=0x%08x\n",
|
|
sc->port.link_config[0]);
|
|
return;
|
|
}
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "PHY addr 0x%08x\n", sc->port.phy_addr);
|
|
|
|
/* mask what we support according to speed_cap_mask per configuration */
|
|
for (idx = 0; idx < cfg_size; idx++) {
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) {
|
|
sc->port.supported[idx] &= ~ELINK_SUPPORTED_10baseT_Half;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL)) {
|
|
sc->port.supported[idx] &= ~ELINK_SUPPORTED_10baseT_Full;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) {
|
|
sc->port.supported[idx] &= ~ELINK_SUPPORTED_100baseT_Half;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL)) {
|
|
sc->port.supported[idx] &= ~ELINK_SUPPORTED_100baseT_Full;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) {
|
|
sc->port.supported[idx] &= ~ELINK_SUPPORTED_1000baseT_Full;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) {
|
|
sc->port.supported[idx] &= ~ELINK_SUPPORTED_2500baseX_Full;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
|
|
sc->port.supported[idx] &= ~ELINK_SUPPORTED_10000baseT_Full;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) {
|
|
sc->port.supported[idx] &= ~ELINK_SUPPORTED_20000baseKR2_Full;
|
|
}
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "PHY supported 0=0x%08x 1=0x%08x\n",
|
|
sc->port.supported[0], sc->port.supported[1]);
|
|
}
|
|
|
|
static void
|
|
bxe_link_settings_requested(struct bxe_softc *sc)
|
|
{
|
|
uint32_t link_config;
|
|
uint32_t idx;
|
|
uint32_t cfg_size = 0;
|
|
|
|
sc->port.advertising[0] = 0;
|
|
sc->port.advertising[1] = 0;
|
|
|
|
switch (sc->link_params.num_phys) {
|
|
case 1:
|
|
case 2:
|
|
cfg_size = 1;
|
|
break;
|
|
case 3:
|
|
cfg_size = 2;
|
|
break;
|
|
}
|
|
|
|
for (idx = 0; idx < cfg_size; idx++) {
|
|
sc->link_params.req_duplex[idx] = DUPLEX_FULL;
|
|
link_config = sc->port.link_config[idx];
|
|
|
|
switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
|
|
case PORT_FEATURE_LINK_SPEED_AUTO:
|
|
if (sc->port.supported[idx] & ELINK_SUPPORTED_Autoneg) {
|
|
sc->link_params.req_line_speed[idx] = ELINK_SPEED_AUTO_NEG;
|
|
sc->port.advertising[idx] |= sc->port.supported[idx];
|
|
if (sc->link_params.phy[ELINK_EXT_PHY1].type ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
|
|
sc->port.advertising[idx] |=
|
|
(ELINK_SUPPORTED_100baseT_Half |
|
|
ELINK_SUPPORTED_100baseT_Full);
|
|
} else {
|
|
/* force 10G, no AN */
|
|
sc->link_params.req_line_speed[idx] = ELINK_SPEED_10000;
|
|
sc->port.advertising[idx] |=
|
|
(ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE);
|
|
continue;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_10M_FULL:
|
|
if (sc->port.supported[idx] & ELINK_SUPPORTED_10baseT_Full) {
|
|
sc->link_params.req_line_speed[idx] = ELINK_SPEED_10;
|
|
sc->port.advertising[idx] |= (ADVERTISED_10baseT_Full |
|
|
ADVERTISED_TP);
|
|
} else {
|
|
BLOGE(sc, "Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x\n",
|
|
link_config, sc->link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_10M_HALF:
|
|
if (sc->port.supported[idx] & ELINK_SUPPORTED_10baseT_Half) {
|
|
sc->link_params.req_line_speed[idx] = ELINK_SPEED_10;
|
|
sc->link_params.req_duplex[idx] = DUPLEX_HALF;
|
|
sc->port.advertising[idx] |= (ADVERTISED_10baseT_Half |
|
|
ADVERTISED_TP);
|
|
} else {
|
|
BLOGE(sc, "Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x\n",
|
|
link_config, sc->link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_100M_FULL:
|
|
if (sc->port.supported[idx] & ELINK_SUPPORTED_100baseT_Full) {
|
|
sc->link_params.req_line_speed[idx] = ELINK_SPEED_100;
|
|
sc->port.advertising[idx] |= (ADVERTISED_100baseT_Full |
|
|
ADVERTISED_TP);
|
|
} else {
|
|
BLOGE(sc, "Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x\n",
|
|
link_config, sc->link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_100M_HALF:
|
|
if (sc->port.supported[idx] & ELINK_SUPPORTED_100baseT_Half) {
|
|
sc->link_params.req_line_speed[idx] = ELINK_SPEED_100;
|
|
sc->link_params.req_duplex[idx] = DUPLEX_HALF;
|
|
sc->port.advertising[idx] |= (ADVERTISED_100baseT_Half |
|
|
ADVERTISED_TP);
|
|
} else {
|
|
BLOGE(sc, "Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x\n",
|
|
link_config, sc->link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_1G:
|
|
if (sc->port.supported[idx] & ELINK_SUPPORTED_1000baseT_Full) {
|
|
sc->link_params.req_line_speed[idx] = ELINK_SPEED_1000;
|
|
sc->port.advertising[idx] |= (ADVERTISED_1000baseT_Full |
|
|
ADVERTISED_TP);
|
|
} else {
|
|
BLOGE(sc, "Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x\n",
|
|
link_config, sc->link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_2_5G:
|
|
if (sc->port.supported[idx] & ELINK_SUPPORTED_2500baseX_Full) {
|
|
sc->link_params.req_line_speed[idx] = ELINK_SPEED_2500;
|
|
sc->port.advertising[idx] |= (ADVERTISED_2500baseX_Full |
|
|
ADVERTISED_TP);
|
|
} else {
|
|
BLOGE(sc, "Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x\n",
|
|
link_config, sc->link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_10G_CX4:
|
|
if (sc->port.supported[idx] & ELINK_SUPPORTED_10000baseT_Full) {
|
|
sc->link_params.req_line_speed[idx] = ELINK_SPEED_10000;
|
|
sc->port.advertising[idx] |= (ADVERTISED_10000baseT_Full |
|
|
ADVERTISED_FIBRE);
|
|
} else {
|
|
BLOGE(sc, "Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x\n",
|
|
link_config, sc->link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_20G:
|
|
sc->link_params.req_line_speed[idx] = ELINK_SPEED_20000;
|
|
break;
|
|
|
|
default:
|
|
BLOGE(sc, "Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x\n",
|
|
link_config, sc->link_params.speed_cap_mask[idx]);
|
|
sc->link_params.req_line_speed[idx] = ELINK_SPEED_AUTO_NEG;
|
|
sc->port.advertising[idx] = sc->port.supported[idx];
|
|
break;
|
|
}
|
|
|
|
sc->link_params.req_flow_ctrl[idx] =
|
|
(link_config & PORT_FEATURE_FLOW_CONTROL_MASK);
|
|
|
|
if (sc->link_params.req_flow_ctrl[idx] == ELINK_FLOW_CTRL_AUTO) {
|
|
if (!(sc->port.supported[idx] & ELINK_SUPPORTED_Autoneg)) {
|
|
sc->link_params.req_flow_ctrl[idx] = ELINK_FLOW_CTRL_NONE;
|
|
} else {
|
|
bxe_set_requested_fc(sc);
|
|
}
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "req_line_speed=%d req_duplex=%d "
|
|
"req_flow_ctrl=0x%x advertising=0x%x\n",
|
|
sc->link_params.req_line_speed[idx],
|
|
sc->link_params.req_duplex[idx],
|
|
sc->link_params.req_flow_ctrl[idx],
|
|
sc->port.advertising[idx]);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_get_phy_info(struct bxe_softc *sc)
|
|
{
|
|
uint8_t port = SC_PORT(sc);
|
|
uint32_t config = sc->port.config;
|
|
uint32_t eee_mode;
|
|
|
|
/* shmem data already read in bxe_get_shmem_info() */
|
|
|
|
BLOGD(sc, DBG_LOAD, "lane_config=0x%08x speed_cap_mask0=0x%08x "
|
|
"link_config0=0x%08x\n",
|
|
sc->link_params.lane_config,
|
|
sc->link_params.speed_cap_mask[0],
|
|
sc->port.link_config[0]);
|
|
|
|
bxe_link_settings_supported(sc, sc->link_params.switch_cfg);
|
|
bxe_link_settings_requested(sc);
|
|
|
|
if (sc->autogreeen == AUTO_GREEN_FORCE_ON) {
|
|
sc->link_params.feature_config_flags |=
|
|
ELINK_FEATURE_CONFIG_AUTOGREEEN_ENABLED;
|
|
} else if (sc->autogreeen == AUTO_GREEN_FORCE_OFF) {
|
|
sc->link_params.feature_config_flags &=
|
|
~ELINK_FEATURE_CONFIG_AUTOGREEEN_ENABLED;
|
|
} else if (config & PORT_FEAT_CFG_AUTOGREEEN_ENABLED) {
|
|
sc->link_params.feature_config_flags |=
|
|
ELINK_FEATURE_CONFIG_AUTOGREEEN_ENABLED;
|
|
}
|
|
|
|
/* configure link feature according to nvram value */
|
|
eee_mode =
|
|
(((SHMEM_RD(sc, dev_info.port_feature_config[port].eee_power_mode)) &
|
|
PORT_FEAT_CFG_EEE_POWER_MODE_MASK) >>
|
|
PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT);
|
|
if (eee_mode != PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED) {
|
|
sc->link_params.eee_mode = (ELINK_EEE_MODE_ADV_LPI |
|
|
ELINK_EEE_MODE_ENABLE_LPI |
|
|
ELINK_EEE_MODE_OUTPUT_TIME);
|
|
} else {
|
|
sc->link_params.eee_mode = 0;
|
|
}
|
|
|
|
/* get the media type */
|
|
bxe_media_detect(sc);
|
|
}
|
|
|
|
static void
|
|
bxe_get_params(struct bxe_softc *sc)
|
|
{
|
|
/* get user tunable params */
|
|
bxe_get_tunable_params(sc);
|
|
|
|
/* select the RX and TX ring sizes */
|
|
sc->tx_ring_size = TX_BD_USABLE;
|
|
sc->rx_ring_size = RX_BD_USABLE;
|
|
|
|
/* XXX disable WoL */
|
|
sc->wol = 0;
|
|
}
|
|
|
|
static void
|
|
bxe_set_modes_bitmap(struct bxe_softc *sc)
|
|
{
|
|
uint32_t flags = 0;
|
|
|
|
if (CHIP_REV_IS_FPGA(sc)) {
|
|
SET_FLAGS(flags, MODE_FPGA);
|
|
} else if (CHIP_REV_IS_EMUL(sc)) {
|
|
SET_FLAGS(flags, MODE_EMUL);
|
|
} else {
|
|
SET_FLAGS(flags, MODE_ASIC);
|
|
}
|
|
|
|
if (CHIP_IS_MODE_4_PORT(sc)) {
|
|
SET_FLAGS(flags, MODE_PORT4);
|
|
} else {
|
|
SET_FLAGS(flags, MODE_PORT2);
|
|
}
|
|
|
|
if (CHIP_IS_E2(sc)) {
|
|
SET_FLAGS(flags, MODE_E2);
|
|
} else if (CHIP_IS_E3(sc)) {
|
|
SET_FLAGS(flags, MODE_E3);
|
|
if (CHIP_REV(sc) == CHIP_REV_Ax) {
|
|
SET_FLAGS(flags, MODE_E3_A0);
|
|
} else /*if (CHIP_REV(sc) == CHIP_REV_Bx)*/ {
|
|
SET_FLAGS(flags, MODE_E3_B0 | MODE_COS3);
|
|
}
|
|
}
|
|
|
|
if (IS_MF(sc)) {
|
|
SET_FLAGS(flags, MODE_MF);
|
|
switch (sc->devinfo.mf_info.mf_mode) {
|
|
case MULTI_FUNCTION_SD:
|
|
SET_FLAGS(flags, MODE_MF_SD);
|
|
break;
|
|
case MULTI_FUNCTION_SI:
|
|
SET_FLAGS(flags, MODE_MF_SI);
|
|
break;
|
|
case MULTI_FUNCTION_AFEX:
|
|
SET_FLAGS(flags, MODE_MF_AFEX);
|
|
break;
|
|
}
|
|
} else {
|
|
SET_FLAGS(flags, MODE_SF);
|
|
}
|
|
|
|
#if defined(__LITTLE_ENDIAN)
|
|
SET_FLAGS(flags, MODE_LITTLE_ENDIAN);
|
|
#else /* __BIG_ENDIAN */
|
|
SET_FLAGS(flags, MODE_BIG_ENDIAN);
|
|
#endif
|
|
|
|
INIT_MODE_FLAGS(sc) = flags;
|
|
}
|
|
|
|
static int
|
|
bxe_alloc_hsi_mem(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_fastpath *fp;
|
|
bus_addr_t busaddr;
|
|
int max_agg_queues;
|
|
int max_segments;
|
|
bus_size_t max_size;
|
|
bus_size_t max_seg_size;
|
|
char buf[32];
|
|
int rc;
|
|
int i, j;
|
|
|
|
/* XXX zero out all vars here and call bxe_alloc_hsi_mem on error */
|
|
|
|
/* allocate the parent bus DMA tag */
|
|
rc = bus_dma_tag_create(bus_get_dma_tag(sc->dev), /* parent tag */
|
|
1, /* alignment */
|
|
0, /* boundary limit */
|
|
BUS_SPACE_MAXADDR, /* restricted low */
|
|
BUS_SPACE_MAXADDR, /* restricted hi */
|
|
NULL, /* addr filter() */
|
|
NULL, /* addr filter() arg */
|
|
BUS_SPACE_MAXSIZE_32BIT, /* max map size */
|
|
BUS_SPACE_UNRESTRICTED, /* num discontinuous */
|
|
BUS_SPACE_MAXSIZE_32BIT, /* max seg size */
|
|
0, /* flags */
|
|
NULL, /* lock() */
|
|
NULL, /* lock() arg */
|
|
&sc->parent_dma_tag); /* returned dma tag */
|
|
if (rc != 0) {
|
|
BLOGE(sc, "Failed to alloc parent DMA tag (%d)!\n", rc);
|
|
return (1);
|
|
}
|
|
|
|
/************************/
|
|
/* DEFAULT STATUS BLOCK */
|
|
/************************/
|
|
|
|
if (bxe_dma_alloc(sc, sizeof(struct host_sp_status_block),
|
|
&sc->def_sb_dma, "default status block") != 0) {
|
|
/* XXX */
|
|
bus_dma_tag_destroy(sc->parent_dma_tag);
|
|
return (1);
|
|
}
|
|
|
|
sc->def_sb = (struct host_sp_status_block *)sc->def_sb_dma.vaddr;
|
|
|
|
/***************/
|
|
/* EVENT QUEUE */
|
|
/***************/
|
|
|
|
if (bxe_dma_alloc(sc, BCM_PAGE_SIZE,
|
|
&sc->eq_dma, "event queue") != 0) {
|
|
/* XXX */
|
|
bxe_dma_free(sc, &sc->def_sb_dma);
|
|
sc->def_sb = NULL;
|
|
bus_dma_tag_destroy(sc->parent_dma_tag);
|
|
return (1);
|
|
}
|
|
|
|
sc->eq = (union event_ring_elem * )sc->eq_dma.vaddr;
|
|
|
|
/*************/
|
|
/* SLOW PATH */
|
|
/*************/
|
|
|
|
if (bxe_dma_alloc(sc, sizeof(struct bxe_slowpath),
|
|
&sc->sp_dma, "slow path") != 0) {
|
|
/* XXX */
|
|
bxe_dma_free(sc, &sc->eq_dma);
|
|
sc->eq = NULL;
|
|
bxe_dma_free(sc, &sc->def_sb_dma);
|
|
sc->def_sb = NULL;
|
|
bus_dma_tag_destroy(sc->parent_dma_tag);
|
|
return (1);
|
|
}
|
|
|
|
sc->sp = (struct bxe_slowpath *)sc->sp_dma.vaddr;
|
|
|
|
/*******************/
|
|
/* SLOW PATH QUEUE */
|
|
/*******************/
|
|
|
|
if (bxe_dma_alloc(sc, BCM_PAGE_SIZE,
|
|
&sc->spq_dma, "slow path queue") != 0) {
|
|
/* XXX */
|
|
bxe_dma_free(sc, &sc->sp_dma);
|
|
sc->sp = NULL;
|
|
bxe_dma_free(sc, &sc->eq_dma);
|
|
sc->eq = NULL;
|
|
bxe_dma_free(sc, &sc->def_sb_dma);
|
|
sc->def_sb = NULL;
|
|
bus_dma_tag_destroy(sc->parent_dma_tag);
|
|
return (1);
|
|
}
|
|
|
|
sc->spq = (struct eth_spe *)sc->spq_dma.vaddr;
|
|
|
|
/***************************/
|
|
/* FW DECOMPRESSION BUFFER */
|
|
/***************************/
|
|
|
|
if (bxe_dma_alloc(sc, FW_BUF_SIZE, &sc->gz_buf_dma,
|
|
"fw decompression buffer") != 0) {
|
|
/* XXX */
|
|
bxe_dma_free(sc, &sc->spq_dma);
|
|
sc->spq = NULL;
|
|
bxe_dma_free(sc, &sc->sp_dma);
|
|
sc->sp = NULL;
|
|
bxe_dma_free(sc, &sc->eq_dma);
|
|
sc->eq = NULL;
|
|
bxe_dma_free(sc, &sc->def_sb_dma);
|
|
sc->def_sb = NULL;
|
|
bus_dma_tag_destroy(sc->parent_dma_tag);
|
|
return (1);
|
|
}
|
|
|
|
sc->gz_buf = (void *)sc->gz_buf_dma.vaddr;
|
|
|
|
if ((sc->gz_strm =
|
|
malloc(sizeof(*sc->gz_strm), M_DEVBUF, M_NOWAIT)) == NULL) {
|
|
/* XXX */
|
|
bxe_dma_free(sc, &sc->gz_buf_dma);
|
|
sc->gz_buf = NULL;
|
|
bxe_dma_free(sc, &sc->spq_dma);
|
|
sc->spq = NULL;
|
|
bxe_dma_free(sc, &sc->sp_dma);
|
|
sc->sp = NULL;
|
|
bxe_dma_free(sc, &sc->eq_dma);
|
|
sc->eq = NULL;
|
|
bxe_dma_free(sc, &sc->def_sb_dma);
|
|
sc->def_sb = NULL;
|
|
bus_dma_tag_destroy(sc->parent_dma_tag);
|
|
return (1);
|
|
}
|
|
|
|
/*************/
|
|
/* FASTPATHS */
|
|
/*************/
|
|
|
|
/* allocate DMA memory for each fastpath structure */
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
fp->sc = sc;
|
|
fp->index = i;
|
|
|
|
/*******************/
|
|
/* FP STATUS BLOCK */
|
|
/*******************/
|
|
|
|
snprintf(buf, sizeof(buf), "fp %d status block", i);
|
|
if (bxe_dma_alloc(sc, sizeof(union bxe_host_hc_status_block),
|
|
&fp->sb_dma, buf) != 0) {
|
|
/* XXX unwind and free previous fastpath allocations */
|
|
BLOGE(sc, "Failed to alloc %s\n", buf);
|
|
return (1);
|
|
} else {
|
|
if (CHIP_IS_E2E3(sc)) {
|
|
fp->status_block.e2_sb =
|
|
(struct host_hc_status_block_e2 *)fp->sb_dma.vaddr;
|
|
} else {
|
|
fp->status_block.e1x_sb =
|
|
(struct host_hc_status_block_e1x *)fp->sb_dma.vaddr;
|
|
}
|
|
}
|
|
|
|
/******************/
|
|
/* FP TX BD CHAIN */
|
|
/******************/
|
|
|
|
snprintf(buf, sizeof(buf), "fp %d tx bd chain", i);
|
|
if (bxe_dma_alloc(sc, (BCM_PAGE_SIZE * TX_BD_NUM_PAGES),
|
|
&fp->tx_dma, buf) != 0) {
|
|
/* XXX unwind and free previous fastpath allocations */
|
|
BLOGE(sc, "Failed to alloc %s\n", buf);
|
|
return (1);
|
|
} else {
|
|
fp->tx_chain = (union eth_tx_bd_types *)fp->tx_dma.vaddr;
|
|
}
|
|
|
|
/* link together the tx bd chain pages */
|
|
for (j = 1; j <= TX_BD_NUM_PAGES; j++) {
|
|
/* index into the tx bd chain array to last entry per page */
|
|
struct eth_tx_next_bd *tx_next_bd =
|
|
&fp->tx_chain[TX_BD_TOTAL_PER_PAGE * j - 1].next_bd;
|
|
/* point to the next page and wrap from last page */
|
|
busaddr = (fp->tx_dma.paddr +
|
|
(BCM_PAGE_SIZE * (j % TX_BD_NUM_PAGES)));
|
|
tx_next_bd->addr_hi = htole32(U64_HI(busaddr));
|
|
tx_next_bd->addr_lo = htole32(U64_LO(busaddr));
|
|
}
|
|
|
|
/******************/
|
|
/* FP RX BD CHAIN */
|
|
/******************/
|
|
|
|
snprintf(buf, sizeof(buf), "fp %d rx bd chain", i);
|
|
if (bxe_dma_alloc(sc, (BCM_PAGE_SIZE * RX_BD_NUM_PAGES),
|
|
&fp->rx_dma, buf) != 0) {
|
|
/* XXX unwind and free previous fastpath allocations */
|
|
BLOGE(sc, "Failed to alloc %s\n", buf);
|
|
return (1);
|
|
} else {
|
|
fp->rx_chain = (struct eth_rx_bd *)fp->rx_dma.vaddr;
|
|
}
|
|
|
|
/* link together the rx bd chain pages */
|
|
for (j = 1; j <= RX_BD_NUM_PAGES; j++) {
|
|
/* index into the rx bd chain array to last entry per page */
|
|
struct eth_rx_bd *rx_bd =
|
|
&fp->rx_chain[RX_BD_TOTAL_PER_PAGE * j - 2];
|
|
/* point to the next page and wrap from last page */
|
|
busaddr = (fp->rx_dma.paddr +
|
|
(BCM_PAGE_SIZE * (j % RX_BD_NUM_PAGES)));
|
|
rx_bd->addr_hi = htole32(U64_HI(busaddr));
|
|
rx_bd->addr_lo = htole32(U64_LO(busaddr));
|
|
}
|
|
|
|
/*******************/
|
|
/* FP RX RCQ CHAIN */
|
|
/*******************/
|
|
|
|
snprintf(buf, sizeof(buf), "fp %d rcq chain", i);
|
|
if (bxe_dma_alloc(sc, (BCM_PAGE_SIZE * RCQ_NUM_PAGES),
|
|
&fp->rcq_dma, buf) != 0) {
|
|
/* XXX unwind and free previous fastpath allocations */
|
|
BLOGE(sc, "Failed to alloc %s\n", buf);
|
|
return (1);
|
|
} else {
|
|
fp->rcq_chain = (union eth_rx_cqe *)fp->rcq_dma.vaddr;
|
|
}
|
|
|
|
/* link together the rcq chain pages */
|
|
for (j = 1; j <= RCQ_NUM_PAGES; j++) {
|
|
/* index into the rcq chain array to last entry per page */
|
|
struct eth_rx_cqe_next_page *rx_cqe_next =
|
|
(struct eth_rx_cqe_next_page *)
|
|
&fp->rcq_chain[RCQ_TOTAL_PER_PAGE * j - 1];
|
|
/* point to the next page and wrap from last page */
|
|
busaddr = (fp->rcq_dma.paddr +
|
|
(BCM_PAGE_SIZE * (j % RCQ_NUM_PAGES)));
|
|
rx_cqe_next->addr_hi = htole32(U64_HI(busaddr));
|
|
rx_cqe_next->addr_lo = htole32(U64_LO(busaddr));
|
|
}
|
|
|
|
/*******************/
|
|
/* FP RX SGE CHAIN */
|
|
/*******************/
|
|
|
|
snprintf(buf, sizeof(buf), "fp %d sge chain", i);
|
|
if (bxe_dma_alloc(sc, (BCM_PAGE_SIZE * RX_SGE_NUM_PAGES),
|
|
&fp->rx_sge_dma, buf) != 0) {
|
|
/* XXX unwind and free previous fastpath allocations */
|
|
BLOGE(sc, "Failed to alloc %s\n", buf);
|
|
return (1);
|
|
} else {
|
|
fp->rx_sge_chain = (struct eth_rx_sge *)fp->rx_sge_dma.vaddr;
|
|
}
|
|
|
|
/* link together the sge chain pages */
|
|
for (j = 1; j <= RX_SGE_NUM_PAGES; j++) {
|
|
/* index into the rcq chain array to last entry per page */
|
|
struct eth_rx_sge *rx_sge =
|
|
&fp->rx_sge_chain[RX_SGE_TOTAL_PER_PAGE * j - 2];
|
|
/* point to the next page and wrap from last page */
|
|
busaddr = (fp->rx_sge_dma.paddr +
|
|
(BCM_PAGE_SIZE * (j % RX_SGE_NUM_PAGES)));
|
|
rx_sge->addr_hi = htole32(U64_HI(busaddr));
|
|
rx_sge->addr_lo = htole32(U64_LO(busaddr));
|
|
}
|
|
|
|
/***********************/
|
|
/* FP TX MBUF DMA MAPS */
|
|
/***********************/
|
|
|
|
/* set required sizes before mapping to conserve resources */
|
|
if (if_getcapenable(sc->ifp) & (IFCAP_TSO4 | IFCAP_TSO6)) {
|
|
max_size = BXE_TSO_MAX_SIZE;
|
|
max_segments = BXE_TSO_MAX_SEGMENTS;
|
|
max_seg_size = BXE_TSO_MAX_SEG_SIZE;
|
|
} else {
|
|
max_size = (MCLBYTES * BXE_MAX_SEGMENTS);
|
|
max_segments = BXE_MAX_SEGMENTS;
|
|
max_seg_size = MCLBYTES;
|
|
}
|
|
|
|
/* create a dma tag for the tx mbufs */
|
|
rc = bus_dma_tag_create(sc->parent_dma_tag, /* parent tag */
|
|
1, /* alignment */
|
|
0, /* boundary limit */
|
|
BUS_SPACE_MAXADDR, /* restricted low */
|
|
BUS_SPACE_MAXADDR, /* restricted hi */
|
|
NULL, /* addr filter() */
|
|
NULL, /* addr filter() arg */
|
|
max_size, /* max map size */
|
|
max_segments, /* num discontinuous */
|
|
max_seg_size, /* max seg size */
|
|
0, /* flags */
|
|
NULL, /* lock() */
|
|
NULL, /* lock() arg */
|
|
&fp->tx_mbuf_tag); /* returned dma tag */
|
|
if (rc != 0) {
|
|
/* XXX unwind and free previous fastpath allocations */
|
|
BLOGE(sc, "Failed to create dma tag for "
|
|
"'fp %d tx mbufs' (%d)\n",
|
|
i, rc);
|
|
return (1);
|
|
}
|
|
|
|
/* create dma maps for each of the tx mbuf clusters */
|
|
for (j = 0; j < TX_BD_TOTAL; j++) {
|
|
if (bus_dmamap_create(fp->tx_mbuf_tag,
|
|
BUS_DMA_NOWAIT,
|
|
&fp->tx_mbuf_chain[j].m_map)) {
|
|
/* XXX unwind and free previous fastpath allocations */
|
|
BLOGE(sc, "Failed to create dma map for "
|
|
"'fp %d tx mbuf %d' (%d)\n",
|
|
i, j, rc);
|
|
return (1);
|
|
}
|
|
}
|
|
|
|
/***********************/
|
|
/* FP RX MBUF DMA MAPS */
|
|
/***********************/
|
|
|
|
/* create a dma tag for the rx mbufs */
|
|
rc = bus_dma_tag_create(sc->parent_dma_tag, /* parent tag */
|
|
1, /* alignment */
|
|
0, /* boundary limit */
|
|
BUS_SPACE_MAXADDR, /* restricted low */
|
|
BUS_SPACE_MAXADDR, /* restricted hi */
|
|
NULL, /* addr filter() */
|
|
NULL, /* addr filter() arg */
|
|
MJUM9BYTES, /* max map size */
|
|
1, /* num discontinuous */
|
|
MJUM9BYTES, /* max seg size */
|
|
0, /* flags */
|
|
NULL, /* lock() */
|
|
NULL, /* lock() arg */
|
|
&fp->rx_mbuf_tag); /* returned dma tag */
|
|
if (rc != 0) {
|
|
/* XXX unwind and free previous fastpath allocations */
|
|
BLOGE(sc, "Failed to create dma tag for "
|
|
"'fp %d rx mbufs' (%d)\n",
|
|
i, rc);
|
|
return (1);
|
|
}
|
|
|
|
/* create dma maps for each of the rx mbuf clusters */
|
|
for (j = 0; j < RX_BD_TOTAL; j++) {
|
|
if (bus_dmamap_create(fp->rx_mbuf_tag,
|
|
BUS_DMA_NOWAIT,
|
|
&fp->rx_mbuf_chain[j].m_map)) {
|
|
/* XXX unwind and free previous fastpath allocations */
|
|
BLOGE(sc, "Failed to create dma map for "
|
|
"'fp %d rx mbuf %d' (%d)\n",
|
|
i, j, rc);
|
|
return (1);
|
|
}
|
|
}
|
|
|
|
/* create dma map for the spare rx mbuf cluster */
|
|
if (bus_dmamap_create(fp->rx_mbuf_tag,
|
|
BUS_DMA_NOWAIT,
|
|
&fp->rx_mbuf_spare_map)) {
|
|
/* XXX unwind and free previous fastpath allocations */
|
|
BLOGE(sc, "Failed to create dma map for "
|
|
"'fp %d spare rx mbuf' (%d)\n",
|
|
i, rc);
|
|
return (1);
|
|
}
|
|
|
|
/***************************/
|
|
/* FP RX SGE MBUF DMA MAPS */
|
|
/***************************/
|
|
|
|
/* create a dma tag for the rx sge mbufs */
|
|
rc = bus_dma_tag_create(sc->parent_dma_tag, /* parent tag */
|
|
1, /* alignment */
|
|
0, /* boundary limit */
|
|
BUS_SPACE_MAXADDR, /* restricted low */
|
|
BUS_SPACE_MAXADDR, /* restricted hi */
|
|
NULL, /* addr filter() */
|
|
NULL, /* addr filter() arg */
|
|
BCM_PAGE_SIZE, /* max map size */
|
|
1, /* num discontinuous */
|
|
BCM_PAGE_SIZE, /* max seg size */
|
|
0, /* flags */
|
|
NULL, /* lock() */
|
|
NULL, /* lock() arg */
|
|
&fp->rx_sge_mbuf_tag); /* returned dma tag */
|
|
if (rc != 0) {
|
|
/* XXX unwind and free previous fastpath allocations */
|
|
BLOGE(sc, "Failed to create dma tag for "
|
|
"'fp %d rx sge mbufs' (%d)\n",
|
|
i, rc);
|
|
return (1);
|
|
}
|
|
|
|
/* create dma maps for the rx sge mbuf clusters */
|
|
for (j = 0; j < RX_SGE_TOTAL; j++) {
|
|
if (bus_dmamap_create(fp->rx_sge_mbuf_tag,
|
|
BUS_DMA_NOWAIT,
|
|
&fp->rx_sge_mbuf_chain[j].m_map)) {
|
|
/* XXX unwind and free previous fastpath allocations */
|
|
BLOGE(sc, "Failed to create dma map for "
|
|
"'fp %d rx sge mbuf %d' (%d)\n",
|
|
i, j, rc);
|
|
return (1);
|
|
}
|
|
}
|
|
|
|
/* create dma map for the spare rx sge mbuf cluster */
|
|
if (bus_dmamap_create(fp->rx_sge_mbuf_tag,
|
|
BUS_DMA_NOWAIT,
|
|
&fp->rx_sge_mbuf_spare_map)) {
|
|
/* XXX unwind and free previous fastpath allocations */
|
|
BLOGE(sc, "Failed to create dma map for "
|
|
"'fp %d spare rx sge mbuf' (%d)\n",
|
|
i, rc);
|
|
return (1);
|
|
}
|
|
|
|
/***************************/
|
|
/* FP RX TPA MBUF DMA MAPS */
|
|
/***************************/
|
|
|
|
/* create dma maps for the rx tpa mbuf clusters */
|
|
max_agg_queues = MAX_AGG_QS(sc);
|
|
|
|
for (j = 0; j < max_agg_queues; j++) {
|
|
if (bus_dmamap_create(fp->rx_mbuf_tag,
|
|
BUS_DMA_NOWAIT,
|
|
&fp->rx_tpa_info[j].bd.m_map)) {
|
|
/* XXX unwind and free previous fastpath allocations */
|
|
BLOGE(sc, "Failed to create dma map for "
|
|
"'fp %d rx tpa mbuf %d' (%d)\n",
|
|
i, j, rc);
|
|
return (1);
|
|
}
|
|
}
|
|
|
|
/* create dma map for the spare rx tpa mbuf cluster */
|
|
if (bus_dmamap_create(fp->rx_mbuf_tag,
|
|
BUS_DMA_NOWAIT,
|
|
&fp->rx_tpa_info_mbuf_spare_map)) {
|
|
/* XXX unwind and free previous fastpath allocations */
|
|
BLOGE(sc, "Failed to create dma map for "
|
|
"'fp %d spare rx tpa mbuf' (%d)\n",
|
|
i, rc);
|
|
return (1);
|
|
}
|
|
|
|
bxe_init_sge_ring_bit_mask(fp);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bxe_free_hsi_mem(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_fastpath *fp;
|
|
int max_agg_queues;
|
|
int i, j;
|
|
|
|
if (sc->parent_dma_tag == NULL) {
|
|
return; /* assume nothing was allocated */
|
|
}
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
|
|
/*******************/
|
|
/* FP STATUS BLOCK */
|
|
/*******************/
|
|
|
|
bxe_dma_free(sc, &fp->sb_dma);
|
|
memset(&fp->status_block, 0, sizeof(fp->status_block));
|
|
|
|
/******************/
|
|
/* FP TX BD CHAIN */
|
|
/******************/
|
|
|
|
bxe_dma_free(sc, &fp->tx_dma);
|
|
fp->tx_chain = NULL;
|
|
|
|
/******************/
|
|
/* FP RX BD CHAIN */
|
|
/******************/
|
|
|
|
bxe_dma_free(sc, &fp->rx_dma);
|
|
fp->rx_chain = NULL;
|
|
|
|
/*******************/
|
|
/* FP RX RCQ CHAIN */
|
|
/*******************/
|
|
|
|
bxe_dma_free(sc, &fp->rcq_dma);
|
|
fp->rcq_chain = NULL;
|
|
|
|
/*******************/
|
|
/* FP RX SGE CHAIN */
|
|
/*******************/
|
|
|
|
bxe_dma_free(sc, &fp->rx_sge_dma);
|
|
fp->rx_sge_chain = NULL;
|
|
|
|
/***********************/
|
|
/* FP TX MBUF DMA MAPS */
|
|
/***********************/
|
|
|
|
if (fp->tx_mbuf_tag != NULL) {
|
|
for (j = 0; j < TX_BD_TOTAL; j++) {
|
|
if (fp->tx_mbuf_chain[j].m_map != NULL) {
|
|
bus_dmamap_unload(fp->tx_mbuf_tag,
|
|
fp->tx_mbuf_chain[j].m_map);
|
|
bus_dmamap_destroy(fp->tx_mbuf_tag,
|
|
fp->tx_mbuf_chain[j].m_map);
|
|
}
|
|
}
|
|
|
|
bus_dma_tag_destroy(fp->tx_mbuf_tag);
|
|
fp->tx_mbuf_tag = NULL;
|
|
}
|
|
|
|
/***********************/
|
|
/* FP RX MBUF DMA MAPS */
|
|
/***********************/
|
|
|
|
if (fp->rx_mbuf_tag != NULL) {
|
|
for (j = 0; j < RX_BD_TOTAL; j++) {
|
|
if (fp->rx_mbuf_chain[j].m_map != NULL) {
|
|
bus_dmamap_unload(fp->rx_mbuf_tag,
|
|
fp->rx_mbuf_chain[j].m_map);
|
|
bus_dmamap_destroy(fp->rx_mbuf_tag,
|
|
fp->rx_mbuf_chain[j].m_map);
|
|
}
|
|
}
|
|
|
|
if (fp->rx_mbuf_spare_map != NULL) {
|
|
bus_dmamap_unload(fp->rx_mbuf_tag, fp->rx_mbuf_spare_map);
|
|
bus_dmamap_destroy(fp->rx_mbuf_tag, fp->rx_mbuf_spare_map);
|
|
}
|
|
|
|
/***************************/
|
|
/* FP RX TPA MBUF DMA MAPS */
|
|
/***************************/
|
|
|
|
max_agg_queues = MAX_AGG_QS(sc);
|
|
|
|
for (j = 0; j < max_agg_queues; j++) {
|
|
if (fp->rx_tpa_info[j].bd.m_map != NULL) {
|
|
bus_dmamap_unload(fp->rx_mbuf_tag,
|
|
fp->rx_tpa_info[j].bd.m_map);
|
|
bus_dmamap_destroy(fp->rx_mbuf_tag,
|
|
fp->rx_tpa_info[j].bd.m_map);
|
|
}
|
|
}
|
|
|
|
if (fp->rx_tpa_info_mbuf_spare_map != NULL) {
|
|
bus_dmamap_unload(fp->rx_mbuf_tag,
|
|
fp->rx_tpa_info_mbuf_spare_map);
|
|
bus_dmamap_destroy(fp->rx_mbuf_tag,
|
|
fp->rx_tpa_info_mbuf_spare_map);
|
|
}
|
|
|
|
bus_dma_tag_destroy(fp->rx_mbuf_tag);
|
|
fp->rx_mbuf_tag = NULL;
|
|
}
|
|
|
|
/***************************/
|
|
/* FP RX SGE MBUF DMA MAPS */
|
|
/***************************/
|
|
|
|
if (fp->rx_sge_mbuf_tag != NULL) {
|
|
for (j = 0; j < RX_SGE_TOTAL; j++) {
|
|
if (fp->rx_sge_mbuf_chain[j].m_map != NULL) {
|
|
bus_dmamap_unload(fp->rx_sge_mbuf_tag,
|
|
fp->rx_sge_mbuf_chain[j].m_map);
|
|
bus_dmamap_destroy(fp->rx_sge_mbuf_tag,
|
|
fp->rx_sge_mbuf_chain[j].m_map);
|
|
}
|
|
}
|
|
|
|
if (fp->rx_sge_mbuf_spare_map != NULL) {
|
|
bus_dmamap_unload(fp->rx_sge_mbuf_tag,
|
|
fp->rx_sge_mbuf_spare_map);
|
|
bus_dmamap_destroy(fp->rx_sge_mbuf_tag,
|
|
fp->rx_sge_mbuf_spare_map);
|
|
}
|
|
|
|
bus_dma_tag_destroy(fp->rx_sge_mbuf_tag);
|
|
fp->rx_sge_mbuf_tag = NULL;
|
|
}
|
|
}
|
|
|
|
/***************************/
|
|
/* FW DECOMPRESSION BUFFER */
|
|
/***************************/
|
|
|
|
bxe_dma_free(sc, &sc->gz_buf_dma);
|
|
sc->gz_buf = NULL;
|
|
free(sc->gz_strm, M_DEVBUF);
|
|
sc->gz_strm = NULL;
|
|
|
|
/*******************/
|
|
/* SLOW PATH QUEUE */
|
|
/*******************/
|
|
|
|
bxe_dma_free(sc, &sc->spq_dma);
|
|
sc->spq = NULL;
|
|
|
|
/*************/
|
|
/* SLOW PATH */
|
|
/*************/
|
|
|
|
bxe_dma_free(sc, &sc->sp_dma);
|
|
sc->sp = NULL;
|
|
|
|
/***************/
|
|
/* EVENT QUEUE */
|
|
/***************/
|
|
|
|
bxe_dma_free(sc, &sc->eq_dma);
|
|
sc->eq = NULL;
|
|
|
|
/************************/
|
|
/* DEFAULT STATUS BLOCK */
|
|
/************************/
|
|
|
|
bxe_dma_free(sc, &sc->def_sb_dma);
|
|
sc->def_sb = NULL;
|
|
|
|
bus_dma_tag_destroy(sc->parent_dma_tag);
|
|
sc->parent_dma_tag = NULL;
|
|
}
|
|
|
|
/*
|
|
* Previous driver DMAE transaction may have occurred when pre-boot stage
|
|
* ended and boot began. This would invalidate the addresses of the
|
|
* transaction, resulting in was-error bit set in the PCI causing all
|
|
* hw-to-host PCIe transactions to timeout. If this happened we want to clear
|
|
* the interrupt which detected this from the pglueb and the was-done bit
|
|
*/
|
|
static void
|
|
bxe_prev_interrupted_dmae(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
val = REG_RD(sc, PGLUE_B_REG_PGLUE_B_INT_STS);
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) {
|
|
BLOGD(sc, DBG_LOAD,
|
|
"Clearing 'was-error' bit that was set in pglueb");
|
|
REG_WR(sc, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, 1 << SC_FUNC(sc));
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
bxe_prev_mcp_done(struct bxe_softc *sc)
|
|
{
|
|
uint32_t rc = bxe_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE,
|
|
DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET);
|
|
if (!rc) {
|
|
BLOGE(sc, "MCP response failure, aborting\n");
|
|
return (-1);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static struct bxe_prev_list_node *
|
|
bxe_prev_path_get_entry(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_prev_list_node *tmp;
|
|
|
|
LIST_FOREACH(tmp, &bxe_prev_list, node) {
|
|
if ((sc->pcie_bus == tmp->bus) &&
|
|
(sc->pcie_device == tmp->slot) &&
|
|
(SC_PATH(sc) == tmp->path)) {
|
|
return (tmp);
|
|
}
|
|
}
|
|
|
|
return (NULL);
|
|
}
|
|
|
|
static uint8_t
|
|
bxe_prev_is_path_marked(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_prev_list_node *tmp;
|
|
int rc = FALSE;
|
|
|
|
mtx_lock(&bxe_prev_mtx);
|
|
|
|
tmp = bxe_prev_path_get_entry(sc);
|
|
if (tmp) {
|
|
if (tmp->aer) {
|
|
BLOGD(sc, DBG_LOAD,
|
|
"Path %d/%d/%d was marked by AER\n",
|
|
sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
|
|
} else {
|
|
rc = TRUE;
|
|
BLOGD(sc, DBG_LOAD,
|
|
"Path %d/%d/%d was already cleaned from previous drivers\n",
|
|
sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
|
|
}
|
|
}
|
|
|
|
mtx_unlock(&bxe_prev_mtx);
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static int
|
|
bxe_prev_mark_path(struct bxe_softc *sc,
|
|
uint8_t after_undi)
|
|
{
|
|
struct bxe_prev_list_node *tmp;
|
|
|
|
mtx_lock(&bxe_prev_mtx);
|
|
|
|
/* Check whether the entry for this path already exists */
|
|
tmp = bxe_prev_path_get_entry(sc);
|
|
if (tmp) {
|
|
if (!tmp->aer) {
|
|
BLOGD(sc, DBG_LOAD,
|
|
"Re-marking AER in path %d/%d/%d\n",
|
|
sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
|
|
} else {
|
|
BLOGD(sc, DBG_LOAD,
|
|
"Removing AER indication from path %d/%d/%d\n",
|
|
sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
|
|
tmp->aer = 0;
|
|
}
|
|
|
|
mtx_unlock(&bxe_prev_mtx);
|
|
return (0);
|
|
}
|
|
|
|
mtx_unlock(&bxe_prev_mtx);
|
|
|
|
/* Create an entry for this path and add it */
|
|
tmp = malloc(sizeof(struct bxe_prev_list_node), M_DEVBUF,
|
|
(M_NOWAIT | M_ZERO));
|
|
if (!tmp) {
|
|
BLOGE(sc, "Failed to allocate 'bxe_prev_list_node'\n");
|
|
return (-1);
|
|
}
|
|
|
|
tmp->bus = sc->pcie_bus;
|
|
tmp->slot = sc->pcie_device;
|
|
tmp->path = SC_PATH(sc);
|
|
tmp->aer = 0;
|
|
tmp->undi = after_undi ? (1 << SC_PORT(sc)) : 0;
|
|
|
|
mtx_lock(&bxe_prev_mtx);
|
|
|
|
BLOGD(sc, DBG_LOAD,
|
|
"Marked path %d/%d/%d - finished previous unload\n",
|
|
sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
|
|
LIST_INSERT_HEAD(&bxe_prev_list, tmp, node);
|
|
|
|
mtx_unlock(&bxe_prev_mtx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bxe_do_flr(struct bxe_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
/* only E2 and onwards support FLR */
|
|
if (CHIP_IS_E1x(sc)) {
|
|
BLOGD(sc, DBG_LOAD, "FLR not supported in E1/E1H\n");
|
|
return (-1);
|
|
}
|
|
|
|
/* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */
|
|
if (sc->devinfo.bc_ver < REQ_BC_VER_4_INITIATE_FLR) {
|
|
BLOGD(sc, DBG_LOAD, "FLR not supported by BC_VER: 0x%08x\n",
|
|
sc->devinfo.bc_ver);
|
|
return (-1);
|
|
}
|
|
|
|
/* Wait for Transaction Pending bit clean */
|
|
for (i = 0; i < 4; i++) {
|
|
if (i) {
|
|
DELAY(((1 << (i - 1)) * 100) * 1000);
|
|
}
|
|
|
|
if (!bxe_is_pcie_pending(sc)) {
|
|
goto clear;
|
|
}
|
|
}
|
|
|
|
BLOGE(sc, "PCIE transaction is not cleared, "
|
|
"proceeding with reset anyway\n");
|
|
|
|
clear:
|
|
|
|
BLOGD(sc, DBG_LOAD, "Initiating FLR\n");
|
|
bxe_fw_command(sc, DRV_MSG_CODE_INITIATE_FLR, 0);
|
|
|
|
return (0);
|
|
}
|
|
|
|
struct bxe_mac_vals {
|
|
uint32_t xmac_addr;
|
|
uint32_t xmac_val;
|
|
uint32_t emac_addr;
|
|
uint32_t emac_val;
|
|
uint32_t umac_addr;
|
|
uint32_t umac_val;
|
|
uint32_t bmac_addr;
|
|
uint32_t bmac_val[2];
|
|
};
|
|
|
|
static void
|
|
bxe_prev_unload_close_mac(struct bxe_softc *sc,
|
|
struct bxe_mac_vals *vals)
|
|
{
|
|
uint32_t val, base_addr, offset, mask, reset_reg;
|
|
uint8_t mac_stopped = FALSE;
|
|
uint8_t port = SC_PORT(sc);
|
|
uint32_t wb_data[2];
|
|
|
|
/* reset addresses as they also mark which values were changed */
|
|
vals->bmac_addr = 0;
|
|
vals->umac_addr = 0;
|
|
vals->xmac_addr = 0;
|
|
vals->emac_addr = 0;
|
|
|
|
reset_reg = REG_RD(sc, MISC_REG_RESET_REG_2);
|
|
|
|
if (!CHIP_IS_E3(sc)) {
|
|
val = REG_RD(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4);
|
|
mask = MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port;
|
|
if ((mask & reset_reg) && val) {
|
|
BLOGD(sc, DBG_LOAD, "Disable BMAC Rx\n");
|
|
base_addr = SC_PORT(sc) ? NIG_REG_INGRESS_BMAC1_MEM
|
|
: NIG_REG_INGRESS_BMAC0_MEM;
|
|
offset = CHIP_IS_E2(sc) ? BIGMAC2_REGISTER_BMAC_CONTROL
|
|
: BIGMAC_REGISTER_BMAC_CONTROL;
|
|
|
|
/*
|
|
* use rd/wr since we cannot use dmae. This is safe
|
|
* since MCP won't access the bus due to the request
|
|
* to unload, and no function on the path can be
|
|
* loaded at this time.
|
|
*/
|
|
wb_data[0] = REG_RD(sc, base_addr + offset);
|
|
wb_data[1] = REG_RD(sc, base_addr + offset + 0x4);
|
|
vals->bmac_addr = base_addr + offset;
|
|
vals->bmac_val[0] = wb_data[0];
|
|
vals->bmac_val[1] = wb_data[1];
|
|
wb_data[0] &= ~ELINK_BMAC_CONTROL_RX_ENABLE;
|
|
REG_WR(sc, vals->bmac_addr, wb_data[0]);
|
|
REG_WR(sc, vals->bmac_addr + 0x4, wb_data[1]);
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "Disable EMAC Rx\n");
|
|
vals->emac_addr = NIG_REG_NIG_EMAC0_EN + SC_PORT(sc)*4;
|
|
vals->emac_val = REG_RD(sc, vals->emac_addr);
|
|
REG_WR(sc, vals->emac_addr, 0);
|
|
mac_stopped = TRUE;
|
|
} else {
|
|
if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) {
|
|
BLOGD(sc, DBG_LOAD, "Disable XMAC Rx\n");
|
|
base_addr = SC_PORT(sc) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
|
|
val = REG_RD(sc, base_addr + XMAC_REG_PFC_CTRL_HI);
|
|
REG_WR(sc, base_addr + XMAC_REG_PFC_CTRL_HI, val & ~(1 << 1));
|
|
REG_WR(sc, base_addr + XMAC_REG_PFC_CTRL_HI, val | (1 << 1));
|
|
vals->xmac_addr = base_addr + XMAC_REG_CTRL;
|
|
vals->xmac_val = REG_RD(sc, vals->xmac_addr);
|
|
REG_WR(sc, vals->xmac_addr, 0);
|
|
mac_stopped = TRUE;
|
|
}
|
|
|
|
mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port;
|
|
if (mask & reset_reg) {
|
|
BLOGD(sc, DBG_LOAD, "Disable UMAC Rx\n");
|
|
base_addr = SC_PORT(sc) ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
|
|
vals->umac_addr = base_addr + UMAC_REG_COMMAND_CONFIG;
|
|
vals->umac_val = REG_RD(sc, vals->umac_addr);
|
|
REG_WR(sc, vals->umac_addr, 0);
|
|
mac_stopped = TRUE;
|
|
}
|
|
}
|
|
|
|
if (mac_stopped) {
|
|
DELAY(20000);
|
|
}
|
|
}
|
|
|
|
#define BXE_PREV_UNDI_PROD_ADDR(p) (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4))
|
|
#define BXE_PREV_UNDI_RCQ(val) ((val) & 0xffff)
|
|
#define BXE_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff)
|
|
#define BXE_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq))
|
|
|
|
static void
|
|
bxe_prev_unload_undi_inc(struct bxe_softc *sc,
|
|
uint8_t port,
|
|
uint8_t inc)
|
|
{
|
|
uint16_t rcq, bd;
|
|
uint32_t tmp_reg = REG_RD(sc, BXE_PREV_UNDI_PROD_ADDR(port));
|
|
|
|
rcq = BXE_PREV_UNDI_RCQ(tmp_reg) + inc;
|
|
bd = BXE_PREV_UNDI_BD(tmp_reg) + inc;
|
|
|
|
tmp_reg = BXE_PREV_UNDI_PROD(rcq, bd);
|
|
REG_WR(sc, BXE_PREV_UNDI_PROD_ADDR(port), tmp_reg);
|
|
|
|
BLOGD(sc, DBG_LOAD,
|
|
"UNDI producer [%d] rings bd -> 0x%04x, rcq -> 0x%04x\n",
|
|
port, bd, rcq);
|
|
}
|
|
|
|
static int
|
|
bxe_prev_unload_common(struct bxe_softc *sc)
|
|
{
|
|
uint32_t reset_reg, tmp_reg = 0, rc;
|
|
uint8_t prev_undi = FALSE;
|
|
struct bxe_mac_vals mac_vals;
|
|
uint32_t timer_count = 1000;
|
|
uint32_t prev_brb;
|
|
|
|
/*
|
|
* It is possible a previous function received 'common' answer,
|
|
* but hasn't loaded yet, therefore creating a scenario of
|
|
* multiple functions receiving 'common' on the same path.
|
|
*/
|
|
BLOGD(sc, DBG_LOAD, "Common unload Flow\n");
|
|
|
|
memset(&mac_vals, 0, sizeof(mac_vals));
|
|
|
|
if (bxe_prev_is_path_marked(sc)) {
|
|
return (bxe_prev_mcp_done(sc));
|
|
}
|
|
|
|
reset_reg = REG_RD(sc, MISC_REG_RESET_REG_1);
|
|
|
|
/* Reset should be performed after BRB is emptied */
|
|
if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) {
|
|
/* Close the MAC Rx to prevent BRB from filling up */
|
|
bxe_prev_unload_close_mac(sc, &mac_vals);
|
|
|
|
/* close LLH filters towards the BRB */
|
|
elink_set_rx_filter(&sc->link_params, 0);
|
|
|
|
/*
|
|
* Check if the UNDI driver was previously loaded.
|
|
* UNDI driver initializes CID offset for normal bell to 0x7
|
|
*/
|
|
if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_DORQ) {
|
|
tmp_reg = REG_RD(sc, DORQ_REG_NORM_CID_OFST);
|
|
if (tmp_reg == 0x7) {
|
|
BLOGD(sc, DBG_LOAD, "UNDI previously loaded\n");
|
|
prev_undi = TRUE;
|
|
/* clear the UNDI indication */
|
|
REG_WR(sc, DORQ_REG_NORM_CID_OFST, 0);
|
|
/* clear possible idle check errors */
|
|
REG_RD(sc, NIG_REG_NIG_INT_STS_CLR_0);
|
|
}
|
|
}
|
|
|
|
/* wait until BRB is empty */
|
|
tmp_reg = REG_RD(sc, BRB1_REG_NUM_OF_FULL_BLOCKS);
|
|
while (timer_count) {
|
|
prev_brb = tmp_reg;
|
|
|
|
tmp_reg = REG_RD(sc, BRB1_REG_NUM_OF_FULL_BLOCKS);
|
|
if (!tmp_reg) {
|
|
break;
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "BRB still has 0x%08x\n", tmp_reg);
|
|
|
|
/* reset timer as long as BRB actually gets emptied */
|
|
if (prev_brb > tmp_reg) {
|
|
timer_count = 1000;
|
|
} else {
|
|
timer_count--;
|
|
}
|
|
|
|
/* If UNDI resides in memory, manually increment it */
|
|
if (prev_undi) {
|
|
bxe_prev_unload_undi_inc(sc, SC_PORT(sc), 1);
|
|
}
|
|
|
|
DELAY(10);
|
|
}
|
|
|
|
if (!timer_count) {
|
|
BLOGE(sc, "Failed to empty BRB\n");
|
|
}
|
|
}
|
|
|
|
/* No packets are in the pipeline, path is ready for reset */
|
|
bxe_reset_common(sc);
|
|
|
|
if (mac_vals.xmac_addr) {
|
|
REG_WR(sc, mac_vals.xmac_addr, mac_vals.xmac_val);
|
|
}
|
|
if (mac_vals.umac_addr) {
|
|
REG_WR(sc, mac_vals.umac_addr, mac_vals.umac_val);
|
|
}
|
|
if (mac_vals.emac_addr) {
|
|
REG_WR(sc, mac_vals.emac_addr, mac_vals.emac_val);
|
|
}
|
|
if (mac_vals.bmac_addr) {
|
|
REG_WR(sc, mac_vals.bmac_addr, mac_vals.bmac_val[0]);
|
|
REG_WR(sc, mac_vals.bmac_addr + 4, mac_vals.bmac_val[1]);
|
|
}
|
|
|
|
rc = bxe_prev_mark_path(sc, prev_undi);
|
|
if (rc) {
|
|
bxe_prev_mcp_done(sc);
|
|
return (rc);
|
|
}
|
|
|
|
return (bxe_prev_mcp_done(sc));
|
|
}
|
|
|
|
static int
|
|
bxe_prev_unload_uncommon(struct bxe_softc *sc)
|
|
{
|
|
int rc;
|
|
|
|
BLOGD(sc, DBG_LOAD, "Uncommon unload Flow\n");
|
|
|
|
/* Test if previous unload process was already finished for this path */
|
|
if (bxe_prev_is_path_marked(sc)) {
|
|
return (bxe_prev_mcp_done(sc));
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "Path is unmarked\n");
|
|
|
|
/*
|
|
* If function has FLR capabilities, and existing FW version matches
|
|
* the one required, then FLR will be sufficient to clean any residue
|
|
* left by previous driver
|
|
*/
|
|
rc = bxe_nic_load_analyze_req(sc, FW_MSG_CODE_DRV_LOAD_FUNCTION);
|
|
if (!rc) {
|
|
/* fw version is good */
|
|
BLOGD(sc, DBG_LOAD, "FW version matches our own, attempting FLR\n");
|
|
rc = bxe_do_flr(sc);
|
|
}
|
|
|
|
if (!rc) {
|
|
/* FLR was performed */
|
|
BLOGD(sc, DBG_LOAD, "FLR successful\n");
|
|
return (0);
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "Could not FLR\n");
|
|
|
|
/* Close the MCP request, return failure*/
|
|
rc = bxe_prev_mcp_done(sc);
|
|
if (!rc) {
|
|
rc = BXE_PREV_WAIT_NEEDED;
|
|
}
|
|
|
|
return (rc);
|
|
}
|
|
|
|
static int
|
|
bxe_prev_unload(struct bxe_softc *sc)
|
|
{
|
|
int time_counter = 10;
|
|
uint32_t fw, hw_lock_reg, hw_lock_val;
|
|
uint32_t rc = 0;
|
|
|
|
/*
|
|
* Clear HW from errors which may have resulted from an interrupted
|
|
* DMAE transaction.
|
|
*/
|
|
bxe_prev_interrupted_dmae(sc);
|
|
|
|
/* Release previously held locks */
|
|
hw_lock_reg =
|
|
(SC_FUNC(sc) <= 5) ?
|
|
(MISC_REG_DRIVER_CONTROL_1 + SC_FUNC(sc) * 8) :
|
|
(MISC_REG_DRIVER_CONTROL_7 + (SC_FUNC(sc) - 6) * 8);
|
|
|
|
hw_lock_val = (REG_RD(sc, hw_lock_reg));
|
|
if (hw_lock_val) {
|
|
if (hw_lock_val & HW_LOCK_RESOURCE_NVRAM) {
|
|
BLOGD(sc, DBG_LOAD, "Releasing previously held NVRAM lock\n");
|
|
REG_WR(sc, MCP_REG_MCPR_NVM_SW_ARB,
|
|
(MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << SC_PORT(sc)));
|
|
}
|
|
BLOGD(sc, DBG_LOAD, "Releasing previously held HW lock\n");
|
|
REG_WR(sc, hw_lock_reg, 0xffffffff);
|
|
} else {
|
|
BLOGD(sc, DBG_LOAD, "No need to release HW/NVRAM locks\n");
|
|
}
|
|
|
|
if (MCPR_ACCESS_LOCK_LOCK & REG_RD(sc, MCP_REG_MCPR_ACCESS_LOCK)) {
|
|
BLOGD(sc, DBG_LOAD, "Releasing previously held ALR\n");
|
|
REG_WR(sc, MCP_REG_MCPR_ACCESS_LOCK, 0);
|
|
}
|
|
|
|
do {
|
|
/* Lock MCP using an unload request */
|
|
fw = bxe_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS, 0);
|
|
if (!fw) {
|
|
BLOGE(sc, "MCP response failure, aborting\n");
|
|
rc = -1;
|
|
break;
|
|
}
|
|
|
|
if (fw == FW_MSG_CODE_DRV_UNLOAD_COMMON) {
|
|
rc = bxe_prev_unload_common(sc);
|
|
break;
|
|
}
|
|
|
|
/* non-common reply from MCP night require looping */
|
|
rc = bxe_prev_unload_uncommon(sc);
|
|
if (rc != BXE_PREV_WAIT_NEEDED) {
|
|
break;
|
|
}
|
|
|
|
DELAY(20000);
|
|
} while (--time_counter);
|
|
|
|
if (!time_counter || rc) {
|
|
BLOGE(sc, "Failed to unload previous driver!\n");
|
|
rc = -1;
|
|
}
|
|
|
|
return (rc);
|
|
}
|
|
|
|
void
|
|
bxe_dcbx_set_state(struct bxe_softc *sc,
|
|
uint8_t dcb_on,
|
|
uint32_t dcbx_enabled)
|
|
{
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
sc->dcb_state = dcb_on;
|
|
sc->dcbx_enabled = dcbx_enabled;
|
|
} else {
|
|
sc->dcb_state = FALSE;
|
|
sc->dcbx_enabled = BXE_DCBX_ENABLED_INVALID;
|
|
}
|
|
BLOGD(sc, DBG_LOAD,
|
|
"DCB state [%s:%s]\n",
|
|
dcb_on ? "ON" : "OFF",
|
|
(dcbx_enabled == BXE_DCBX_ENABLED_OFF) ? "user-mode" :
|
|
(dcbx_enabled == BXE_DCBX_ENABLED_ON_NEG_OFF) ? "on-chip static" :
|
|
(dcbx_enabled == BXE_DCBX_ENABLED_ON_NEG_ON) ?
|
|
"on-chip with negotiation" : "invalid");
|
|
}
|
|
|
|
/* must be called after sriov-enable */
|
|
static int
|
|
bxe_set_qm_cid_count(struct bxe_softc *sc)
|
|
{
|
|
int cid_count = BXE_L2_MAX_CID(sc);
|
|
|
|
if (IS_SRIOV(sc)) {
|
|
cid_count += BXE_VF_CIDS;
|
|
}
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
cid_count += CNIC_CID_MAX;
|
|
}
|
|
|
|
return (roundup(cid_count, QM_CID_ROUND));
|
|
}
|
|
|
|
static void
|
|
bxe_init_multi_cos(struct bxe_softc *sc)
|
|
{
|
|
int pri, cos;
|
|
|
|
uint32_t pri_map = 0; /* XXX change to user config */
|
|
|
|
for (pri = 0; pri < BXE_MAX_PRIORITY; pri++) {
|
|
cos = ((pri_map & (0xf << (pri * 4))) >> (pri * 4));
|
|
if (cos < sc->max_cos) {
|
|
sc->prio_to_cos[pri] = cos;
|
|
} else {
|
|
BLOGW(sc, "Invalid COS %d for priority %d "
|
|
"(max COS is %d), setting to 0\n",
|
|
cos, pri, (sc->max_cos - 1));
|
|
sc->prio_to_cos[pri] = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
bxe_sysctl_state(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bxe_softc *sc;
|
|
int error, result;
|
|
|
|
result = 0;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr) {
|
|
return (error);
|
|
}
|
|
|
|
if (result == 1) {
|
|
sc = (struct bxe_softc *)arg1;
|
|
BLOGI(sc, "... dumping driver state ...\n");
|
|
/* XXX */
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
bxe_sysctl_eth_stat(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bxe_softc *sc = (struct bxe_softc *)arg1;
|
|
uint32_t *eth_stats = (uint32_t *)&sc->eth_stats;
|
|
uint32_t *offset;
|
|
uint64_t value = 0;
|
|
int index = (int)arg2;
|
|
|
|
if (index >= BXE_NUM_ETH_STATS) {
|
|
BLOGE(sc, "bxe_eth_stats index out of range (%d)\n", index);
|
|
return (-1);
|
|
}
|
|
|
|
offset = (eth_stats + bxe_eth_stats_arr[index].offset);
|
|
|
|
switch (bxe_eth_stats_arr[index].size) {
|
|
case 4:
|
|
value = (uint64_t)*offset;
|
|
break;
|
|
case 8:
|
|
value = HILO_U64(*offset, *(offset + 1));
|
|
break;
|
|
default:
|
|
BLOGE(sc, "Invalid bxe_eth_stats size (index=%d size=%d)\n",
|
|
index, bxe_eth_stats_arr[index].size);
|
|
return (-1);
|
|
}
|
|
|
|
return (sysctl_handle_64(oidp, &value, 0, req));
|
|
}
|
|
|
|
static int
|
|
bxe_sysctl_eth_q_stat(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bxe_softc *sc = (struct bxe_softc *)arg1;
|
|
uint32_t *eth_stats;
|
|
uint32_t *offset;
|
|
uint64_t value = 0;
|
|
uint32_t q_stat = (uint32_t)arg2;
|
|
uint32_t fp_index = ((q_stat >> 16) & 0xffff);
|
|
uint32_t index = (q_stat & 0xffff);
|
|
|
|
eth_stats = (uint32_t *)&sc->fp[fp_index].eth_q_stats;
|
|
|
|
if (index >= BXE_NUM_ETH_Q_STATS) {
|
|
BLOGE(sc, "bxe_eth_q_stats index out of range (%d)\n", index);
|
|
return (-1);
|
|
}
|
|
|
|
offset = (eth_stats + bxe_eth_q_stats_arr[index].offset);
|
|
|
|
switch (bxe_eth_q_stats_arr[index].size) {
|
|
case 4:
|
|
value = (uint64_t)*offset;
|
|
break;
|
|
case 8:
|
|
value = HILO_U64(*offset, *(offset + 1));
|
|
break;
|
|
default:
|
|
BLOGE(sc, "Invalid bxe_eth_q_stats size (index=%d size=%d)\n",
|
|
index, bxe_eth_q_stats_arr[index].size);
|
|
return (-1);
|
|
}
|
|
|
|
return (sysctl_handle_64(oidp, &value, 0, req));
|
|
}
|
|
|
|
static void
|
|
bxe_add_sysctls(struct bxe_softc *sc)
|
|
{
|
|
struct sysctl_ctx_list *ctx;
|
|
struct sysctl_oid_list *children;
|
|
struct sysctl_oid *queue_top, *queue;
|
|
struct sysctl_oid_list *queue_top_children, *queue_children;
|
|
char queue_num_buf[32];
|
|
uint32_t q_stat;
|
|
int i, j;
|
|
|
|
ctx = device_get_sysctl_ctx(sc->dev);
|
|
children = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->dev));
|
|
|
|
SYSCTL_ADD_STRING(ctx, children, OID_AUTO, "version",
|
|
CTLFLAG_RD, BXE_DRIVER_VERSION, 0,
|
|
"version");
|
|
|
|
SYSCTL_ADD_STRING(ctx, children, OID_AUTO, "bc_version",
|
|
CTLFLAG_RD, &sc->devinfo.bc_ver_str, 0,
|
|
"bootcode version");
|
|
|
|
snprintf(sc->fw_ver_str, sizeof(sc->fw_ver_str), "%d.%d.%d.%d",
|
|
BCM_5710_FW_MAJOR_VERSION,
|
|
BCM_5710_FW_MINOR_VERSION,
|
|
BCM_5710_FW_REVISION_VERSION,
|
|
BCM_5710_FW_ENGINEERING_VERSION);
|
|
SYSCTL_ADD_STRING(ctx, children, OID_AUTO, "fw_version",
|
|
CTLFLAG_RD, &sc->fw_ver_str, 0,
|
|
"firmware version");
|
|
|
|
snprintf(sc->mf_mode_str, sizeof(sc->mf_mode_str), "%s",
|
|
((sc->devinfo.mf_info.mf_mode == SINGLE_FUNCTION) ? "Single" :
|
|
(sc->devinfo.mf_info.mf_mode == MULTI_FUNCTION_SD) ? "MF-SD" :
|
|
(sc->devinfo.mf_info.mf_mode == MULTI_FUNCTION_SI) ? "MF-SI" :
|
|
(sc->devinfo.mf_info.mf_mode == MULTI_FUNCTION_AFEX) ? "MF-AFEX" :
|
|
"Unknown"));
|
|
SYSCTL_ADD_STRING(ctx, children, OID_AUTO, "mf_mode",
|
|
CTLFLAG_RD, &sc->mf_mode_str, 0,
|
|
"multifunction mode");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO, "mf_vnics",
|
|
CTLFLAG_RD, &sc->devinfo.mf_info.vnics_per_port, 0,
|
|
"multifunction vnics per port");
|
|
|
|
SYSCTL_ADD_STRING(ctx, children, OID_AUTO, "mac_addr",
|
|
CTLFLAG_RD, &sc->mac_addr_str, 0,
|
|
"mac address");
|
|
|
|
snprintf(sc->pci_link_str, sizeof(sc->pci_link_str), "%s x%d",
|
|
((sc->devinfo.pcie_link_speed == 1) ? "2.5GT/s" :
|
|
(sc->devinfo.pcie_link_speed == 2) ? "5.0GT/s" :
|
|
(sc->devinfo.pcie_link_speed == 4) ? "8.0GT/s" :
|
|
"???GT/s"),
|
|
sc->devinfo.pcie_link_width);
|
|
SYSCTL_ADD_STRING(ctx, children, OID_AUTO, "pci_link",
|
|
CTLFLAG_RD, &sc->pci_link_str, 0,
|
|
"pci link status");
|
|
|
|
sc->debug = bxe_debug;
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO, "debug",
|
|
CTLFLAG_RW, &sc->debug, 0,
|
|
"debug logging mode");
|
|
|
|
sc->rx_budget = bxe_rx_budget;
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO, "rx_budget",
|
|
CTLFLAG_RW, &sc->rx_budget, 0,
|
|
"rx processing budget");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "state",
|
|
CTLTYPE_UINT | CTLFLAG_RW, sc, 0,
|
|
bxe_sysctl_state, "IU", "dump driver state");
|
|
|
|
for (i = 0; i < BXE_NUM_ETH_STATS; i++) {
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
bxe_eth_stats_arr[i].string,
|
|
CTLTYPE_U64 | CTLFLAG_RD, sc, i,
|
|
bxe_sysctl_eth_stat, "LU",
|
|
bxe_eth_stats_arr[i].string);
|
|
}
|
|
|
|
/* add a new parent node for all queues "dev.bxe.#.queue" */
|
|
queue_top = SYSCTL_ADD_NODE(ctx, children, OID_AUTO, "queue",
|
|
CTLFLAG_RD, NULL, "queue");
|
|
queue_top_children = SYSCTL_CHILDREN(queue_top);
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
/* add a new parent node for a single queue "dev.bxe.#.queue.#" */
|
|
snprintf(queue_num_buf, sizeof(queue_num_buf), "%d", i);
|
|
queue = SYSCTL_ADD_NODE(ctx, queue_top_children, OID_AUTO,
|
|
queue_num_buf, CTLFLAG_RD, NULL,
|
|
"single queue");
|
|
queue_children = SYSCTL_CHILDREN(queue);
|
|
|
|
for (j = 0; j < BXE_NUM_ETH_Q_STATS; j++) {
|
|
q_stat = ((i << 16) | j);
|
|
SYSCTL_ADD_PROC(ctx, queue_children, OID_AUTO,
|
|
bxe_eth_q_stats_arr[j].string,
|
|
CTLTYPE_U64 | CTLFLAG_RD, sc, q_stat,
|
|
bxe_sysctl_eth_q_stat, "LU",
|
|
bxe_eth_q_stats_arr[j].string);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Device attach function.
|
|
*
|
|
* Allocates device resources, performs secondary chip identification, and
|
|
* initializes driver instance variables. This function is called from driver
|
|
* load after a successful probe.
|
|
*
|
|
* Returns:
|
|
* 0 = Success, >0 = Failure
|
|
*/
|
|
static int
|
|
bxe_attach(device_t dev)
|
|
{
|
|
struct bxe_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
BLOGD(sc, DBG_LOAD, "Starting attach...\n");
|
|
|
|
sc->state = BXE_STATE_CLOSED;
|
|
|
|
sc->dev = dev;
|
|
sc->unit = device_get_unit(dev);
|
|
|
|
BLOGD(sc, DBG_LOAD, "softc = %p\n", sc);
|
|
|
|
sc->pcie_bus = pci_get_bus(dev);
|
|
sc->pcie_device = pci_get_slot(dev);
|
|
sc->pcie_func = pci_get_function(dev);
|
|
|
|
/* enable bus master capability */
|
|
pci_enable_busmaster(dev);
|
|
|
|
/* get the BARs */
|
|
if (bxe_allocate_bars(sc) != 0) {
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* initialize the mutexes */
|
|
bxe_init_mutexes(sc);
|
|
|
|
/* prepare the periodic callout */
|
|
callout_init(&sc->periodic_callout, 0);
|
|
|
|
/* prepare the chip taskqueue */
|
|
sc->chip_tq_flags = CHIP_TQ_NONE;
|
|
snprintf(sc->chip_tq_name, sizeof(sc->chip_tq_name),
|
|
"bxe%d_chip_tq", sc->unit);
|
|
TASK_INIT(&sc->chip_tq_task, 0, bxe_handle_chip_tq, sc);
|
|
sc->chip_tq = taskqueue_create(sc->chip_tq_name, M_NOWAIT,
|
|
taskqueue_thread_enqueue,
|
|
&sc->chip_tq);
|
|
taskqueue_start_threads(&sc->chip_tq, 1, PWAIT, /* lower priority */
|
|
"%s", sc->chip_tq_name);
|
|
|
|
/* get device info and set params */
|
|
if (bxe_get_device_info(sc) != 0) {
|
|
BLOGE(sc, "getting device info\n");
|
|
bxe_deallocate_bars(sc);
|
|
pci_disable_busmaster(dev);
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* get final misc params */
|
|
bxe_get_params(sc);
|
|
|
|
/* set the default MTU (changed via ifconfig) */
|
|
sc->mtu = ETHERMTU;
|
|
|
|
bxe_set_modes_bitmap(sc);
|
|
|
|
/* XXX
|
|
* If in AFEX mode and the function is configured for FCoE
|
|
* then bail... no L2 allowed.
|
|
*/
|
|
|
|
/* get phy settings from shmem and 'and' against admin settings */
|
|
bxe_get_phy_info(sc);
|
|
|
|
/* initialize the FreeBSD ifnet interface */
|
|
if (bxe_init_ifnet(sc) != 0) {
|
|
bxe_release_mutexes(sc);
|
|
bxe_deallocate_bars(sc);
|
|
pci_disable_busmaster(dev);
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* allocate device interrupts */
|
|
if (bxe_interrupt_alloc(sc) != 0) {
|
|
if (sc->ifp != NULL) {
|
|
ether_ifdetach_drv(sc->ifp);
|
|
}
|
|
ifmedia_removeall(&sc->ifmedia);
|
|
bxe_release_mutexes(sc);
|
|
bxe_deallocate_bars(sc);
|
|
pci_disable_busmaster(dev);
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* allocate ilt */
|
|
if (bxe_alloc_ilt_mem(sc) != 0) {
|
|
bxe_interrupt_free(sc);
|
|
if (sc->ifp != NULL) {
|
|
ether_ifdetach_drv(sc->ifp);
|
|
}
|
|
ifmedia_removeall(&sc->ifmedia);
|
|
bxe_release_mutexes(sc);
|
|
bxe_deallocate_bars(sc);
|
|
pci_disable_busmaster(dev);
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* allocate the host hardware/software hsi structures */
|
|
if (bxe_alloc_hsi_mem(sc) != 0) {
|
|
bxe_free_ilt_mem(sc);
|
|
bxe_interrupt_free(sc);
|
|
if (sc->ifp != NULL) {
|
|
ether_ifdetach_drv(sc->ifp);
|
|
}
|
|
ifmedia_removeall(&sc->ifmedia);
|
|
bxe_release_mutexes(sc);
|
|
bxe_deallocate_bars(sc);
|
|
pci_disable_busmaster(dev);
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* need to reset chip if UNDI was active */
|
|
if (IS_PF(sc) && !BXE_NOMCP(sc)) {
|
|
/* init fw_seq */
|
|
sc->fw_seq =
|
|
(SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_mb_header) &
|
|
DRV_MSG_SEQ_NUMBER_MASK);
|
|
BLOGD(sc, DBG_LOAD, "prev unload fw_seq 0x%04x\n", sc->fw_seq);
|
|
bxe_prev_unload(sc);
|
|
}
|
|
|
|
#if 1
|
|
/* XXX */
|
|
bxe_dcbx_set_state(sc, FALSE, BXE_DCBX_ENABLED_OFF);
|
|
#else
|
|
if (SHMEM2_HAS(sc, dcbx_lldp_params_offset) &&
|
|
SHMEM2_HAS(sc, dcbx_lldp_dcbx_stat_offset) &&
|
|
SHMEM2_RD(sc, dcbx_lldp_params_offset) &&
|
|
SHMEM2_RD(sc, dcbx_lldp_dcbx_stat_offset)) {
|
|
bxe_dcbx_set_state(sc, TRUE, BXE_DCBX_ENABLED_ON_NEG_ON);
|
|
bxe_dcbx_init_params(sc);
|
|
} else {
|
|
bxe_dcbx_set_state(sc, FALSE, BXE_DCBX_ENABLED_OFF);
|
|
}
|
|
#endif
|
|
|
|
/* calculate qm_cid_count */
|
|
sc->qm_cid_count = bxe_set_qm_cid_count(sc);
|
|
BLOGD(sc, DBG_LOAD, "qm_cid_count=%d\n", sc->qm_cid_count);
|
|
|
|
sc->max_cos = 1;
|
|
bxe_init_multi_cos(sc);
|
|
|
|
bxe_add_sysctls(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Device detach function.
|
|
*
|
|
* Stops the controller, resets the controller, and releases resources.
|
|
*
|
|
* Returns:
|
|
* 0 = Success, >0 = Failure
|
|
*/
|
|
static int
|
|
bxe_detach(device_t dev)
|
|
{
|
|
struct bxe_softc *sc;
|
|
if_t ifp;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
BLOGD(sc, DBG_LOAD, "Starting detach...\n");
|
|
|
|
ifp = sc->ifp;
|
|
if (ifp != NULL && if_vlantrunkinuse(ifp)) {
|
|
BLOGE(sc, "Cannot detach while VLANs are in use.\n");
|
|
return(EBUSY);
|
|
}
|
|
|
|
/* stop the periodic callout */
|
|
bxe_periodic_stop(sc);
|
|
|
|
/* stop the chip taskqueue */
|
|
atomic_store_rel_long(&sc->chip_tq_flags, CHIP_TQ_NONE);
|
|
if (sc->chip_tq) {
|
|
taskqueue_drain(sc->chip_tq, &sc->chip_tq_task);
|
|
taskqueue_free(sc->chip_tq);
|
|
sc->chip_tq = NULL;
|
|
}
|
|
|
|
/* stop and reset the controller if it was open */
|
|
if (sc->state != BXE_STATE_CLOSED) {
|
|
BXE_CORE_LOCK(sc);
|
|
bxe_nic_unload(sc, UNLOAD_CLOSE, TRUE);
|
|
BXE_CORE_UNLOCK(sc);
|
|
}
|
|
|
|
/* release the network interface */
|
|
if (ifp != NULL) {
|
|
ether_ifdetach_drv(ifp);
|
|
}
|
|
ifmedia_removeall(&sc->ifmedia);
|
|
|
|
/* XXX do the following based on driver state... */
|
|
|
|
/* free the host hardware/software hsi structures */
|
|
bxe_free_hsi_mem(sc);
|
|
|
|
/* free ilt */
|
|
bxe_free_ilt_mem(sc);
|
|
|
|
/* release the interrupts */
|
|
bxe_interrupt_free(sc);
|
|
|
|
/* Release the mutexes*/
|
|
bxe_release_mutexes(sc);
|
|
|
|
/* Release the PCIe BAR mapped memory */
|
|
bxe_deallocate_bars(sc);
|
|
|
|
/* Release the FreeBSD interface. */
|
|
if (sc->ifp != NULL) {
|
|
if_free_drv(sc->ifp);
|
|
}
|
|
|
|
pci_disable_busmaster(dev);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Device shutdown function.
|
|
*
|
|
* Stops and resets the controller.
|
|
*
|
|
* Returns:
|
|
* Nothing
|
|
*/
|
|
static int
|
|
bxe_shutdown(device_t dev)
|
|
{
|
|
struct bxe_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
BLOGD(sc, DBG_LOAD, "Starting shutdown...\n");
|
|
|
|
/* stop the periodic callout */
|
|
bxe_periodic_stop(sc);
|
|
|
|
BXE_CORE_LOCK(sc);
|
|
bxe_nic_unload(sc, UNLOAD_NORMAL, FALSE);
|
|
BXE_CORE_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
bxe_igu_ack_sb(struct bxe_softc *sc,
|
|
uint8_t igu_sb_id,
|
|
uint8_t segment,
|
|
uint16_t index,
|
|
uint8_t op,
|
|
uint8_t update)
|
|
{
|
|
uint32_t igu_addr = sc->igu_base_addr;
|
|
igu_addr += (IGU_CMD_INT_ACK_BASE + igu_sb_id)*8;
|
|
bxe_igu_ack_sb_gen(sc, igu_sb_id, segment, index, op, update, igu_addr);
|
|
}
|
|
|
|
static void
|
|
bxe_igu_clear_sb_gen(struct bxe_softc *sc,
|
|
uint8_t func,
|
|
uint8_t idu_sb_id,
|
|
uint8_t is_pf)
|
|
{
|
|
uint32_t data, ctl, cnt = 100;
|
|
uint32_t igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA;
|
|
uint32_t igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL;
|
|
uint32_t igu_addr_ack = IGU_REG_CSTORM_TYPE_0_SB_CLEANUP + (idu_sb_id/32)*4;
|
|
uint32_t sb_bit = 1 << (idu_sb_id%32);
|
|
uint32_t func_encode = func | (is_pf ? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT;
|
|
uint32_t addr_encode = IGU_CMD_E2_PROD_UPD_BASE + idu_sb_id;
|
|
|
|
/* Not supported in BC mode */
|
|
if (CHIP_INT_MODE_IS_BC(sc)) {
|
|
return;
|
|
}
|
|
|
|
data = ((IGU_USE_REGISTER_cstorm_type_0_sb_cleanup <<
|
|
IGU_REGULAR_CLEANUP_TYPE_SHIFT) |
|
|
IGU_REGULAR_CLEANUP_SET |
|
|
IGU_REGULAR_BCLEANUP);
|
|
|
|
ctl = ((addr_encode << IGU_CTRL_REG_ADDRESS_SHIFT) |
|
|
(func_encode << IGU_CTRL_REG_FID_SHIFT) |
|
|
(IGU_CTRL_CMD_TYPE_WR << IGU_CTRL_REG_TYPE_SHIFT));
|
|
|
|
BLOGD(sc, DBG_LOAD, "write 0x%08x to IGU(via GRC) addr 0x%x\n",
|
|
data, igu_addr_data);
|
|
REG_WR(sc, igu_addr_data, data);
|
|
|
|
bus_space_barrier(sc->bar[BAR0].tag, sc->bar[BAR0].handle, 0, 0,
|
|
BUS_SPACE_BARRIER_WRITE);
|
|
mb();
|
|
|
|
BLOGD(sc, DBG_LOAD, "write 0x%08x to IGU(via GRC) addr 0x%x\n",
|
|
ctl, igu_addr_ctl);
|
|
REG_WR(sc, igu_addr_ctl, ctl);
|
|
|
|
bus_space_barrier(sc->bar[BAR0].tag, sc->bar[BAR0].handle, 0, 0,
|
|
BUS_SPACE_BARRIER_WRITE);
|
|
mb();
|
|
|
|
/* wait for clean up to finish */
|
|
while (!(REG_RD(sc, igu_addr_ack) & sb_bit) && --cnt) {
|
|
DELAY(20000);
|
|
}
|
|
|
|
if (!(REG_RD(sc, igu_addr_ack) & sb_bit)) {
|
|
BLOGD(sc, DBG_LOAD,
|
|
"Unable to finish IGU cleanup: "
|
|
"idu_sb_id %d offset %d bit %d (cnt %d)\n",
|
|
idu_sb_id, idu_sb_id/32, idu_sb_id%32, cnt);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_igu_clear_sb(struct bxe_softc *sc,
|
|
uint8_t idu_sb_id)
|
|
{
|
|
bxe_igu_clear_sb_gen(sc, SC_FUNC(sc), idu_sb_id, TRUE /*PF*/);
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*******************/
|
|
/* ECORE CALLBACKS */
|
|
/*******************/
|
|
|
|
static void
|
|
bxe_reset_common(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val = 0x1400;
|
|
|
|
/* reset_common */
|
|
REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR), 0xd3ffff7f);
|
|
|
|
if (CHIP_IS_E3(sc)) {
|
|
val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
|
|
val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
|
|
}
|
|
|
|
REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR), val);
|
|
}
|
|
|
|
static void
|
|
bxe_common_init_phy(struct bxe_softc *sc)
|
|
{
|
|
uint32_t shmem_base[2];
|
|
uint32_t shmem2_base[2];
|
|
|
|
/* Avoid common init in case MFW supports LFA */
|
|
if (SHMEM2_RD(sc, size) >
|
|
(uint32_t)offsetof(struct shmem2_region,
|
|
lfa_host_addr[SC_PORT(sc)])) {
|
|
return;
|
|
}
|
|
|
|
shmem_base[0] = sc->devinfo.shmem_base;
|
|
shmem2_base[0] = sc->devinfo.shmem2_base;
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
shmem_base[1] = SHMEM2_RD(sc, other_shmem_base_addr);
|
|
shmem2_base[1] = SHMEM2_RD(sc, other_shmem2_base_addr);
|
|
}
|
|
|
|
BXE_PHY_LOCK(sc);
|
|
elink_common_init_phy(sc, shmem_base, shmem2_base,
|
|
sc->devinfo.chip_id, 0);
|
|
BXE_PHY_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
bxe_pf_disable(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
|
|
|
|
val &= ~IGU_PF_CONF_FUNC_EN;
|
|
|
|
REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
|
|
REG_WR(sc, CFC_REG_WEAK_ENABLE_PF, 0);
|
|
}
|
|
|
|
static void
|
|
bxe_init_pxp(struct bxe_softc *sc)
|
|
{
|
|
uint16_t devctl;
|
|
int r_order, w_order;
|
|
|
|
devctl = bxe_pcie_capability_read(sc, PCIR_EXPRESS_DEVICE_CTL, 2);
|
|
|
|
BLOGD(sc, DBG_LOAD, "read 0x%08x from devctl\n", devctl);
|
|
|
|
w_order = ((devctl & PCIM_EXP_CTL_MAX_PAYLOAD) >> 5);
|
|
|
|
if (sc->mrrs == -1) {
|
|
r_order = ((devctl & PCIM_EXP_CTL_MAX_READ_REQUEST) >> 12);
|
|
} else {
|
|
BLOGD(sc, DBG_LOAD, "forcing read order to %d\n", sc->mrrs);
|
|
r_order = sc->mrrs;
|
|
}
|
|
|
|
ecore_init_pxp_arb(sc, r_order, w_order);
|
|
}
|
|
|
|
static uint32_t
|
|
bxe_get_pretend_reg(struct bxe_softc *sc)
|
|
{
|
|
uint32_t base = PXP2_REG_PGL_PRETEND_FUNC_F0;
|
|
uint32_t stride = (PXP2_REG_PGL_PRETEND_FUNC_F1 - base);
|
|
return (base + (SC_ABS_FUNC(sc)) * stride);
|
|
}
|
|
|
|
/*
|
|
* Called only on E1H or E2.
|
|
* When pretending to be PF, the pretend value is the function number 0..7.
|
|
* When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID
|
|
* combination.
|
|
*/
|
|
static int
|
|
bxe_pretend_func(struct bxe_softc *sc,
|
|
uint16_t pretend_func_val)
|
|
{
|
|
uint32_t pretend_reg;
|
|
|
|
if (CHIP_IS_E1H(sc) && (pretend_func_val > E1H_FUNC_MAX)) {
|
|
return (-1);
|
|
}
|
|
|
|
/* get my own pretend register */
|
|
pretend_reg = bxe_get_pretend_reg(sc);
|
|
REG_WR(sc, pretend_reg, pretend_func_val);
|
|
REG_RD(sc, pretend_reg);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bxe_iov_init_dmae(struct bxe_softc *sc)
|
|
{
|
|
return;
|
|
#if 0
|
|
BLOGD(sc, DBG_LOAD, "SRIOV is %s\n", IS_SRIOV(sc) ? "ON" : "OFF");
|
|
|
|
if (!IS_SRIOV(sc)) {
|
|
return;
|
|
}
|
|
|
|
REG_WR(sc, DMAE_REG_BACKWARD_COMP_EN, 0);
|
|
#endif
|
|
}
|
|
|
|
#if 0
|
|
static int
|
|
bxe_iov_init_ilt(struct bxe_softc *sc,
|
|
uint16_t line)
|
|
{
|
|
return (line);
|
|
#if 0
|
|
int i;
|
|
struct ecore_ilt* ilt = sc->ilt;
|
|
|
|
if (!IS_SRIOV(sc)) {
|
|
return (line);
|
|
}
|
|
|
|
/* set vfs ilt lines */
|
|
for (i = 0; i < BXE_VF_CIDS/ILT_PAGE_CIDS ; i++) {
|
|
struct hw_dma *hw_cxt = SC_VF_CXT_PAGE(sc,i);
|
|
ilt->lines[line+i].page = hw_cxt->addr;
|
|
ilt->lines[line+i].page_mapping = hw_cxt->mapping;
|
|
ilt->lines[line+i].size = hw_cxt->size; /* doesn't matter */
|
|
}
|
|
return (line+i);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
static void
|
|
bxe_iov_init_dq(struct bxe_softc *sc)
|
|
{
|
|
return;
|
|
#if 0
|
|
if (!IS_SRIOV(sc)) {
|
|
return;
|
|
}
|
|
|
|
/* Set the DQ such that the CID reflect the abs_vfid */
|
|
REG_WR(sc, DORQ_REG_VF_NORM_VF_BASE, 0);
|
|
REG_WR(sc, DORQ_REG_MAX_RVFID_SIZE, ilog2(BNX2X_MAX_NUM_OF_VFS));
|
|
|
|
/*
|
|
* Set VFs starting CID. If its > 0 the preceding CIDs are belong to
|
|
* the PF L2 queues
|
|
*/
|
|
REG_WR(sc, DORQ_REG_VF_NORM_CID_BASE, BNX2X_FIRST_VF_CID);
|
|
|
|
/* The VF window size is the log2 of the max number of CIDs per VF */
|
|
REG_WR(sc, DORQ_REG_VF_NORM_CID_WND_SIZE, BNX2X_VF_CID_WND);
|
|
|
|
/*
|
|
* The VF doorbell size 0 - *B, 4 - 128B. We set it here to match
|
|
* the Pf doorbell size although the 2 are independent.
|
|
*/
|
|
REG_WR(sc, DORQ_REG_VF_NORM_CID_OFST,
|
|
BNX2X_DB_SHIFT - BNX2X_DB_MIN_SHIFT);
|
|
|
|
/*
|
|
* No security checks for now -
|
|
* configure single rule (out of 16) mask = 0x1, value = 0x0,
|
|
* CID range 0 - 0x1ffff
|
|
*/
|
|
REG_WR(sc, DORQ_REG_VF_TYPE_MASK_0, 1);
|
|
REG_WR(sc, DORQ_REG_VF_TYPE_VALUE_0, 0);
|
|
REG_WR(sc, DORQ_REG_VF_TYPE_MIN_MCID_0, 0);
|
|
REG_WR(sc, DORQ_REG_VF_TYPE_MAX_MCID_0, 0x1ffff);
|
|
|
|
/* set the number of VF alllowed doorbells to the full DQ range */
|
|
REG_WR(sc, DORQ_REG_VF_NORM_MAX_CID_COUNT, 0x20000);
|
|
|
|
/* set the VF doorbell threshold */
|
|
REG_WR(sc, DORQ_REG_VF_USAGE_CT_LIMIT, 4);
|
|
#endif
|
|
}
|
|
|
|
/* send a NIG loopback debug packet */
|
|
static void
|
|
bxe_lb_pckt(struct bxe_softc *sc)
|
|
{
|
|
uint32_t wb_write[3];
|
|
|
|
/* Ethernet source and destination addresses */
|
|
wb_write[0] = 0x55555555;
|
|
wb_write[1] = 0x55555555;
|
|
wb_write[2] = 0x20; /* SOP */
|
|
REG_WR_DMAE(sc, NIG_REG_DEBUG_PACKET_LB, wb_write, 3);
|
|
|
|
/* NON-IP protocol */
|
|
wb_write[0] = 0x09000000;
|
|
wb_write[1] = 0x55555555;
|
|
wb_write[2] = 0x10; /* EOP, eop_bvalid = 0 */
|
|
REG_WR_DMAE(sc, NIG_REG_DEBUG_PACKET_LB, wb_write, 3);
|
|
}
|
|
|
|
/*
|
|
* Some of the internal memories are not directly readable from the driver.
|
|
* To test them we send debug packets.
|
|
*/
|
|
static int
|
|
bxe_int_mem_test(struct bxe_softc *sc)
|
|
{
|
|
int factor;
|
|
int count, i;
|
|
uint32_t val = 0;
|
|
|
|
if (CHIP_REV_IS_FPGA(sc)) {
|
|
factor = 120;
|
|
} else if (CHIP_REV_IS_EMUL(sc)) {
|
|
factor = 200;
|
|
} else {
|
|
factor = 1;
|
|
}
|
|
|
|
/* disable inputs of parser neighbor blocks */
|
|
REG_WR(sc, TSDM_REG_ENABLE_IN1, 0x0);
|
|
REG_WR(sc, TCM_REG_PRS_IFEN, 0x0);
|
|
REG_WR(sc, CFC_REG_DEBUG0, 0x1);
|
|
REG_WR(sc, NIG_REG_PRS_REQ_IN_EN, 0x0);
|
|
|
|
/* write 0 to parser credits for CFC search request */
|
|
REG_WR(sc, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
|
|
|
|
/* send Ethernet packet */
|
|
bxe_lb_pckt(sc);
|
|
|
|
/* TODO do i reset NIG statistic? */
|
|
/* Wait until NIG register shows 1 packet of size 0x10 */
|
|
count = 1000 * factor;
|
|
while (count) {
|
|
bxe_read_dmae(sc, NIG_REG_STAT2_BRB_OCTET, 2);
|
|
val = *BXE_SP(sc, wb_data[0]);
|
|
if (val == 0x10) {
|
|
break;
|
|
}
|
|
|
|
DELAY(10000);
|
|
count--;
|
|
}
|
|
|
|
if (val != 0x10) {
|
|
BLOGE(sc, "NIG timeout val=0x%x\n", val);
|
|
return (-1);
|
|
}
|
|
|
|
/* wait until PRS register shows 1 packet */
|
|
count = (1000 * factor);
|
|
while (count) {
|
|
val = REG_RD(sc, PRS_REG_NUM_OF_PACKETS);
|
|
if (val == 1) {
|
|
break;
|
|
}
|
|
|
|
DELAY(10000);
|
|
count--;
|
|
}
|
|
|
|
if (val != 0x1) {
|
|
BLOGE(sc, "PRS timeout val=0x%x\n", val);
|
|
return (-2);
|
|
}
|
|
|
|
/* Reset and init BRB, PRS */
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03);
|
|
DELAY(50000);
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
|
|
DELAY(50000);
|
|
ecore_init_block(sc, BLOCK_BRB1, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_PRS, PHASE_COMMON);
|
|
|
|
/* Disable inputs of parser neighbor blocks */
|
|
REG_WR(sc, TSDM_REG_ENABLE_IN1, 0x0);
|
|
REG_WR(sc, TCM_REG_PRS_IFEN, 0x0);
|
|
REG_WR(sc, CFC_REG_DEBUG0, 0x1);
|
|
REG_WR(sc, NIG_REG_PRS_REQ_IN_EN, 0x0);
|
|
|
|
/* Write 0 to parser credits for CFC search request */
|
|
REG_WR(sc, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
|
|
|
|
/* send 10 Ethernet packets */
|
|
for (i = 0; i < 10; i++) {
|
|
bxe_lb_pckt(sc);
|
|
}
|
|
|
|
/* Wait until NIG register shows 10+1 packets of size 11*0x10 = 0xb0 */
|
|
count = (1000 * factor);
|
|
while (count) {
|
|
bxe_read_dmae(sc, NIG_REG_STAT2_BRB_OCTET, 2);
|
|
val = *BXE_SP(sc, wb_data[0]);
|
|
if (val == 0xb0) {
|
|
break;
|
|
}
|
|
|
|
DELAY(10000);
|
|
count--;
|
|
}
|
|
|
|
if (val != 0xb0) {
|
|
BLOGE(sc, "NIG timeout val=0x%x\n", val);
|
|
return (-3);
|
|
}
|
|
|
|
/* Wait until PRS register shows 2 packets */
|
|
val = REG_RD(sc, PRS_REG_NUM_OF_PACKETS);
|
|
if (val != 2) {
|
|
BLOGE(sc, "PRS timeout val=0x%x\n", val);
|
|
}
|
|
|
|
/* Write 1 to parser credits for CFC search request */
|
|
REG_WR(sc, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x1);
|
|
|
|
/* Wait until PRS register shows 3 packets */
|
|
DELAY(10000 * factor);
|
|
|
|
/* Wait until NIG register shows 1 packet of size 0x10 */
|
|
val = REG_RD(sc, PRS_REG_NUM_OF_PACKETS);
|
|
if (val != 3) {
|
|
BLOGE(sc, "PRS timeout val=0x%x\n", val);
|
|
}
|
|
|
|
/* clear NIG EOP FIFO */
|
|
for (i = 0; i < 11; i++) {
|
|
REG_RD(sc, NIG_REG_INGRESS_EOP_LB_FIFO);
|
|
}
|
|
|
|
val = REG_RD(sc, NIG_REG_INGRESS_EOP_LB_EMPTY);
|
|
if (val != 1) {
|
|
BLOGE(sc, "clear of NIG failed\n");
|
|
return (-4);
|
|
}
|
|
|
|
/* Reset and init BRB, PRS, NIG */
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03);
|
|
DELAY(50000);
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
|
|
DELAY(50000);
|
|
ecore_init_block(sc, BLOCK_BRB1, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_PRS, PHASE_COMMON);
|
|
if (!CNIC_SUPPORT(sc)) {
|
|
/* set NIC mode */
|
|
REG_WR(sc, PRS_REG_NIC_MODE, 1);
|
|
}
|
|
|
|
/* Enable inputs of parser neighbor blocks */
|
|
REG_WR(sc, TSDM_REG_ENABLE_IN1, 0x7fffffff);
|
|
REG_WR(sc, TCM_REG_PRS_IFEN, 0x1);
|
|
REG_WR(sc, CFC_REG_DEBUG0, 0x0);
|
|
REG_WR(sc, NIG_REG_PRS_REQ_IN_EN, 0x1);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bxe_setup_fan_failure_detection(struct bxe_softc *sc)
|
|
{
|
|
int is_required;
|
|
uint32_t val;
|
|
int port;
|
|
|
|
is_required = 0;
|
|
val = (SHMEM_RD(sc, dev_info.shared_hw_config.config2) &
|
|
SHARED_HW_CFG_FAN_FAILURE_MASK);
|
|
|
|
if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED) {
|
|
is_required = 1;
|
|
}
|
|
/*
|
|
* The fan failure mechanism is usually related to the PHY type since
|
|
* the power consumption of the board is affected by the PHY. Currently,
|
|
* fan is required for most designs with SFX7101, BCM8727 and BCM8481.
|
|
*/
|
|
else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE) {
|
|
for (port = PORT_0; port < PORT_MAX; port++) {
|
|
is_required |= elink_fan_failure_det_req(sc,
|
|
sc->devinfo.shmem_base,
|
|
sc->devinfo.shmem2_base,
|
|
port);
|
|
}
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "fan detection setting: %d\n", is_required);
|
|
|
|
if (is_required == 0) {
|
|
return;
|
|
}
|
|
|
|
/* Fan failure is indicated by SPIO 5 */
|
|
bxe_set_spio(sc, MISC_SPIO_SPIO5, MISC_SPIO_INPUT_HI_Z);
|
|
|
|
/* set to active low mode */
|
|
val = REG_RD(sc, MISC_REG_SPIO_INT);
|
|
val |= (MISC_SPIO_SPIO5 << MISC_SPIO_INT_OLD_SET_POS);
|
|
REG_WR(sc, MISC_REG_SPIO_INT, val);
|
|
|
|
/* enable interrupt to signal the IGU */
|
|
val = REG_RD(sc, MISC_REG_SPIO_EVENT_EN);
|
|
val |= MISC_SPIO_SPIO5;
|
|
REG_WR(sc, MISC_REG_SPIO_EVENT_EN, val);
|
|
}
|
|
|
|
static void
|
|
bxe_enable_blocks_attention(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
|
|
REG_WR(sc, PXP_REG_PXP_INT_MASK_0, 0);
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, PXP_REG_PXP_INT_MASK_1, 0x40);
|
|
} else {
|
|
REG_WR(sc, PXP_REG_PXP_INT_MASK_1, 0);
|
|
}
|
|
REG_WR(sc, DORQ_REG_DORQ_INT_MASK, 0);
|
|
REG_WR(sc, CFC_REG_CFC_INT_MASK, 0);
|
|
/*
|
|
* mask read length error interrupts in brb for parser
|
|
* (parsing unit and 'checksum and crc' unit)
|
|
* these errors are legal (PU reads fixed length and CAC can cause
|
|
* read length error on truncated packets)
|
|
*/
|
|
REG_WR(sc, BRB1_REG_BRB1_INT_MASK, 0xFC00);
|
|
REG_WR(sc, QM_REG_QM_INT_MASK, 0);
|
|
REG_WR(sc, TM_REG_TM_INT_MASK, 0);
|
|
REG_WR(sc, XSDM_REG_XSDM_INT_MASK_0, 0);
|
|
REG_WR(sc, XSDM_REG_XSDM_INT_MASK_1, 0);
|
|
REG_WR(sc, XCM_REG_XCM_INT_MASK, 0);
|
|
/* REG_WR(sc, XSEM_REG_XSEM_INT_MASK_0, 0); */
|
|
/* REG_WR(sc, XSEM_REG_XSEM_INT_MASK_1, 0); */
|
|
REG_WR(sc, USDM_REG_USDM_INT_MASK_0, 0);
|
|
REG_WR(sc, USDM_REG_USDM_INT_MASK_1, 0);
|
|
REG_WR(sc, UCM_REG_UCM_INT_MASK, 0);
|
|
/* REG_WR(sc, USEM_REG_USEM_INT_MASK_0, 0); */
|
|
/* REG_WR(sc, USEM_REG_USEM_INT_MASK_1, 0); */
|
|
REG_WR(sc, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0);
|
|
REG_WR(sc, CSDM_REG_CSDM_INT_MASK_0, 0);
|
|
REG_WR(sc, CSDM_REG_CSDM_INT_MASK_1, 0);
|
|
REG_WR(sc, CCM_REG_CCM_INT_MASK, 0);
|
|
/* REG_WR(sc, CSEM_REG_CSEM_INT_MASK_0, 0); */
|
|
/* REG_WR(sc, CSEM_REG_CSEM_INT_MASK_1, 0); */
|
|
|
|
val = (PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT |
|
|
PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF |
|
|
PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN);
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
val |= (PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED |
|
|
PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED);
|
|
}
|
|
REG_WR(sc, PXP2_REG_PXP2_INT_MASK_0, val);
|
|
|
|
REG_WR(sc, TSDM_REG_TSDM_INT_MASK_0, 0);
|
|
REG_WR(sc, TSDM_REG_TSDM_INT_MASK_1, 0);
|
|
REG_WR(sc, TCM_REG_TCM_INT_MASK, 0);
|
|
/* REG_WR(sc, TSEM_REG_TSEM_INT_MASK_0, 0); */
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */
|
|
REG_WR(sc, TSEM_REG_TSEM_INT_MASK_1, 0x07ff);
|
|
}
|
|
|
|
REG_WR(sc, CDU_REG_CDU_INT_MASK, 0);
|
|
REG_WR(sc, DMAE_REG_DMAE_INT_MASK, 0);
|
|
/* REG_WR(sc, MISC_REG_MISC_INT_MASK, 0); */
|
|
REG_WR(sc, PBF_REG_PBF_INT_MASK, 0x18); /* bit 3,4 masked */
|
|
}
|
|
|
|
/**
|
|
* bxe_init_hw_common - initialize the HW at the COMMON phase.
|
|
*
|
|
* @sc: driver handle
|
|
*/
|
|
static int
|
|
bxe_init_hw_common(struct bxe_softc *sc)
|
|
{
|
|
uint8_t abs_func_id;
|
|
uint32_t val;
|
|
|
|
BLOGD(sc, DBG_LOAD, "starting common init for func %d\n",
|
|
SC_ABS_FUNC(sc));
|
|
|
|
/*
|
|
* take the RESET lock to protect undi_unload flow from accessing
|
|
* registers while we are resetting the chip
|
|
*/
|
|
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
|
|
|
|
bxe_reset_common(sc);
|
|
|
|
REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET), 0xffffffff);
|
|
|
|
val = 0xfffc;
|
|
if (CHIP_IS_E3(sc)) {
|
|
val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
|
|
val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
|
|
}
|
|
|
|
REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET), val);
|
|
|
|
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
|
|
|
|
ecore_init_block(sc, BLOCK_MISC, PHASE_COMMON);
|
|
BLOGD(sc, DBG_LOAD, "after misc block init\n");
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/*
|
|
* 4-port mode or 2-port mode we need to turn off master-enable for
|
|
* everyone. After that we turn it back on for self. So, we disregard
|
|
* multi-function, and always disable all functions on the given path,
|
|
* this means 0,2,4,6 for path 0 and 1,3,5,7 for path 1
|
|
*/
|
|
for (abs_func_id = SC_PATH(sc);
|
|
abs_func_id < (E2_FUNC_MAX * 2);
|
|
abs_func_id += 2) {
|
|
if (abs_func_id == SC_ABS_FUNC(sc)) {
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
|
|
continue;
|
|
}
|
|
|
|
bxe_pretend_func(sc, abs_func_id);
|
|
|
|
/* clear pf enable */
|
|
bxe_pf_disable(sc);
|
|
|
|
bxe_pretend_func(sc, SC_ABS_FUNC(sc));
|
|
}
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "after pf disable\n");
|
|
|
|
ecore_init_block(sc, BLOCK_PXP, PHASE_COMMON);
|
|
|
|
if (CHIP_IS_E1(sc)) {
|
|
/*
|
|
* enable HW interrupt from PXP on USDM overflow
|
|
* bit 16 on INT_MASK_0
|
|
*/
|
|
REG_WR(sc, PXP_REG_PXP_INT_MASK_0, 0);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_PXP2, PHASE_COMMON);
|
|
bxe_init_pxp(sc);
|
|
|
|
#ifdef __BIG_ENDIAN
|
|
REG_WR(sc, PXP2_REG_RQ_QM_ENDIAN_M, 1);
|
|
REG_WR(sc, PXP2_REG_RQ_TM_ENDIAN_M, 1);
|
|
REG_WR(sc, PXP2_REG_RQ_SRC_ENDIAN_M, 1);
|
|
REG_WR(sc, PXP2_REG_RQ_CDU_ENDIAN_M, 1);
|
|
REG_WR(sc, PXP2_REG_RQ_DBG_ENDIAN_M, 1);
|
|
/* make sure this value is 0 */
|
|
REG_WR(sc, PXP2_REG_RQ_HC_ENDIAN_M, 0);
|
|
|
|
//REG_WR(sc, PXP2_REG_RD_PBF_SWAP_MODE, 1);
|
|
REG_WR(sc, PXP2_REG_RD_QM_SWAP_MODE, 1);
|
|
REG_WR(sc, PXP2_REG_RD_TM_SWAP_MODE, 1);
|
|
REG_WR(sc, PXP2_REG_RD_SRC_SWAP_MODE, 1);
|
|
REG_WR(sc, PXP2_REG_RD_CDURD_SWAP_MODE, 1);
|
|
#endif
|
|
|
|
ecore_ilt_init_page_size(sc, INITOP_SET);
|
|
|
|
if (CHIP_REV_IS_FPGA(sc) && CHIP_IS_E1H(sc)) {
|
|
REG_WR(sc, PXP2_REG_PGL_TAGS_LIMIT, 0x1);
|
|
}
|
|
|
|
/* let the HW do it's magic... */
|
|
DELAY(100000);
|
|
|
|
/* finish PXP init */
|
|
val = REG_RD(sc, PXP2_REG_RQ_CFG_DONE);
|
|
if (val != 1) {
|
|
BLOGE(sc, "PXP2 CFG failed\n");
|
|
return (-1);
|
|
}
|
|
val = REG_RD(sc, PXP2_REG_RD_INIT_DONE);
|
|
if (val != 1) {
|
|
BLOGE(sc, "PXP2 RD_INIT failed\n");
|
|
return (-1);
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "after pxp init\n");
|
|
|
|
/*
|
|
* Timer bug workaround for E2 only. We need to set the entire ILT to have
|
|
* entries with value "0" and valid bit on. This needs to be done by the
|
|
* first PF that is loaded in a path (i.e. common phase)
|
|
*/
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/*
|
|
* In E2 there is a bug in the timers block that can cause function 6 / 7
|
|
* (i.e. vnic3) to start even if it is marked as "scan-off".
|
|
* This occurs when a different function (func2,3) is being marked
|
|
* as "scan-off". Real-life scenario for example: if a driver is being
|
|
* load-unloaded while func6,7 are down. This will cause the timer to access
|
|
* the ilt, translate to a logical address and send a request to read/write.
|
|
* Since the ilt for the function that is down is not valid, this will cause
|
|
* a translation error which is unrecoverable.
|
|
* The Workaround is intended to make sure that when this happens nothing
|
|
* fatal will occur. The workaround:
|
|
* 1. First PF driver which loads on a path will:
|
|
* a. After taking the chip out of reset, by using pretend,
|
|
* it will write "0" to the following registers of
|
|
* the other vnics.
|
|
* REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
|
|
* REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0);
|
|
* REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0);
|
|
* And for itself it will write '1' to
|
|
* PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable
|
|
* dmae-operations (writing to pram for example.)
|
|
* note: can be done for only function 6,7 but cleaner this
|
|
* way.
|
|
* b. Write zero+valid to the entire ILT.
|
|
* c. Init the first_timers_ilt_entry, last_timers_ilt_entry of
|
|
* VNIC3 (of that port). The range allocated will be the
|
|
* entire ILT. This is needed to prevent ILT range error.
|
|
* 2. Any PF driver load flow:
|
|
* a. ILT update with the physical addresses of the allocated
|
|
* logical pages.
|
|
* b. Wait 20msec. - note that this timeout is needed to make
|
|
* sure there are no requests in one of the PXP internal
|
|
* queues with "old" ILT addresses.
|
|
* c. PF enable in the PGLC.
|
|
* d. Clear the was_error of the PF in the PGLC. (could have
|
|
* occurred while driver was down)
|
|
* e. PF enable in the CFC (WEAK + STRONG)
|
|
* f. Timers scan enable
|
|
* 3. PF driver unload flow:
|
|
* a. Clear the Timers scan_en.
|
|
* b. Polling for scan_on=0 for that PF.
|
|
* c. Clear the PF enable bit in the PXP.
|
|
* d. Clear the PF enable in the CFC (WEAK + STRONG)
|
|
* e. Write zero+valid to all ILT entries (The valid bit must
|
|
* stay set)
|
|
* f. If this is VNIC 3 of a port then also init
|
|
* first_timers_ilt_entry to zero and last_timers_ilt_entry
|
|
* to the last enrty in the ILT.
|
|
*
|
|
* Notes:
|
|
* Currently the PF error in the PGLC is non recoverable.
|
|
* In the future the there will be a recovery routine for this error.
|
|
* Currently attention is masked.
|
|
* Having an MCP lock on the load/unload process does not guarantee that
|
|
* there is no Timer disable during Func6/7 enable. This is because the
|
|
* Timers scan is currently being cleared by the MCP on FLR.
|
|
* Step 2.d can be done only for PF6/7 and the driver can also check if
|
|
* there is error before clearing it. But the flow above is simpler and
|
|
* more general.
|
|
* All ILT entries are written by zero+valid and not just PF6/7
|
|
* ILT entries since in the future the ILT entries allocation for
|
|
* PF-s might be dynamic.
|
|
*/
|
|
struct ilt_client_info ilt_cli;
|
|
struct ecore_ilt ilt;
|
|
|
|
memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
|
|
memset(&ilt, 0, sizeof(struct ecore_ilt));
|
|
|
|
/* initialize dummy TM client */
|
|
ilt_cli.start = 0;
|
|
ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
|
|
ilt_cli.client_num = ILT_CLIENT_TM;
|
|
|
|
/*
|
|
* Step 1: set zeroes to all ilt page entries with valid bit on
|
|
* Step 2: set the timers first/last ilt entry to point
|
|
* to the entire range to prevent ILT range error for 3rd/4th
|
|
* vnic (this code assumes existence of the vnic)
|
|
*
|
|
* both steps performed by call to ecore_ilt_client_init_op()
|
|
* with dummy TM client
|
|
*
|
|
* we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT
|
|
* and his brother are split registers
|
|
*/
|
|
|
|
bxe_pretend_func(sc, (SC_PATH(sc) + 6));
|
|
ecore_ilt_client_init_op_ilt(sc, &ilt, &ilt_cli, INITOP_CLEAR);
|
|
bxe_pretend_func(sc, SC_ABS_FUNC(sc));
|
|
|
|
REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN, BXE_PXP_DRAM_ALIGN);
|
|
REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN_RD, BXE_PXP_DRAM_ALIGN);
|
|
REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN_SEL, 1);
|
|
}
|
|
|
|
REG_WR(sc, PXP2_REG_RQ_DISABLE_INPUTS, 0);
|
|
REG_WR(sc, PXP2_REG_RD_DISABLE_INPUTS, 0);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
int factor = CHIP_REV_IS_EMUL(sc) ? 1000 :
|
|
(CHIP_REV_IS_FPGA(sc) ? 400 : 0);
|
|
|
|
ecore_init_block(sc, BLOCK_PGLUE_B, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_ATC, PHASE_COMMON);
|
|
|
|
/* let the HW do it's magic... */
|
|
do {
|
|
DELAY(200000);
|
|
val = REG_RD(sc, ATC_REG_ATC_INIT_DONE);
|
|
} while (factor-- && (val != 1));
|
|
|
|
if (val != 1) {
|
|
BLOGE(sc, "ATC_INIT failed\n");
|
|
return (-1);
|
|
}
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "after pglue and atc init\n");
|
|
|
|
ecore_init_block(sc, BLOCK_DMAE, PHASE_COMMON);
|
|
|
|
bxe_iov_init_dmae(sc);
|
|
|
|
/* clean the DMAE memory */
|
|
sc->dmae_ready = 1;
|
|
ecore_init_fill(sc, TSEM_REG_PRAM, 0, 8, 1);
|
|
|
|
ecore_init_block(sc, BLOCK_TCM, PHASE_COMMON);
|
|
|
|
ecore_init_block(sc, BLOCK_UCM, PHASE_COMMON);
|
|
|
|
ecore_init_block(sc, BLOCK_CCM, PHASE_COMMON);
|
|
|
|
ecore_init_block(sc, BLOCK_XCM, PHASE_COMMON);
|
|
|
|
bxe_read_dmae(sc, XSEM_REG_PASSIVE_BUFFER, 3);
|
|
bxe_read_dmae(sc, CSEM_REG_PASSIVE_BUFFER, 3);
|
|
bxe_read_dmae(sc, TSEM_REG_PASSIVE_BUFFER, 3);
|
|
bxe_read_dmae(sc, USEM_REG_PASSIVE_BUFFER, 3);
|
|
|
|
ecore_init_block(sc, BLOCK_QM, PHASE_COMMON);
|
|
|
|
/* QM queues pointers table */
|
|
ecore_qm_init_ptr_table(sc, sc->qm_cid_count, INITOP_SET);
|
|
|
|
/* soft reset pulse */
|
|
REG_WR(sc, QM_REG_SOFT_RESET, 1);
|
|
REG_WR(sc, QM_REG_SOFT_RESET, 0);
|
|
|
|
if (CNIC_SUPPORT(sc))
|
|
ecore_init_block(sc, BLOCK_TM, PHASE_COMMON);
|
|
|
|
ecore_init_block(sc, BLOCK_DORQ, PHASE_COMMON);
|
|
REG_WR(sc, DORQ_REG_DPM_CID_OFST, BXE_DB_SHIFT);
|
|
if (!CHIP_REV_IS_SLOW(sc)) {
|
|
/* enable hw interrupt from doorbell Q */
|
|
REG_WR(sc, DORQ_REG_DORQ_INT_MASK, 0);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_BRB1, PHASE_COMMON);
|
|
|
|
ecore_init_block(sc, BLOCK_PRS, PHASE_COMMON);
|
|
REG_WR(sc, PRS_REG_A_PRSU_20, 0xf);
|
|
|
|
if (!CHIP_IS_E1(sc)) {
|
|
REG_WR(sc, PRS_REG_E1HOV_MODE, sc->devinfo.mf_info.path_has_ovlan);
|
|
}
|
|
|
|
if (!CHIP_IS_E1x(sc) && !CHIP_IS_E3B0(sc)) {
|
|
if (IS_MF_AFEX(sc)) {
|
|
/*
|
|
* configure that AFEX and VLAN headers must be
|
|
* received in AFEX mode
|
|
*/
|
|
REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC, 0xE);
|
|
REG_WR(sc, PRS_REG_MUST_HAVE_HDRS, 0xA);
|
|
REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0, 0x6);
|
|
REG_WR(sc, PRS_REG_TAG_ETHERTYPE_0, 0x8926);
|
|
REG_WR(sc, PRS_REG_TAG_LEN_0, 0x4);
|
|
} else {
|
|
/*
|
|
* Bit-map indicating which L2 hdrs may appear
|
|
* after the basic Ethernet header
|
|
*/
|
|
REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC,
|
|
sc->devinfo.mf_info.path_has_ovlan ? 7 : 6);
|
|
}
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_TSDM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_CSDM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_USDM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_XSDM, PHASE_COMMON);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/* reset VFC memories */
|
|
REG_WR(sc, TSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
|
|
VFC_MEMORIES_RST_REG_CAM_RST |
|
|
VFC_MEMORIES_RST_REG_RAM_RST);
|
|
REG_WR(sc, XSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
|
|
VFC_MEMORIES_RST_REG_CAM_RST |
|
|
VFC_MEMORIES_RST_REG_RAM_RST);
|
|
|
|
DELAY(20000);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_TSEM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_USEM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_CSEM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_XSEM, PHASE_COMMON);
|
|
|
|
/* sync semi rtc */
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
|
|
0x80000000);
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
|
|
0x80000000);
|
|
|
|
ecore_init_block(sc, BLOCK_UPB, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_XPB, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_PBF, PHASE_COMMON);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
if (IS_MF_AFEX(sc)) {
|
|
/*
|
|
* configure that AFEX and VLAN headers must be
|
|
* sent in AFEX mode
|
|
*/
|
|
REG_WR(sc, PBF_REG_HDRS_AFTER_BASIC, 0xE);
|
|
REG_WR(sc, PBF_REG_MUST_HAVE_HDRS, 0xA);
|
|
REG_WR(sc, PBF_REG_HDRS_AFTER_TAG_0, 0x6);
|
|
REG_WR(sc, PBF_REG_TAG_ETHERTYPE_0, 0x8926);
|
|
REG_WR(sc, PBF_REG_TAG_LEN_0, 0x4);
|
|
} else {
|
|
REG_WR(sc, PBF_REG_HDRS_AFTER_BASIC,
|
|
sc->devinfo.mf_info.path_has_ovlan ? 7 : 6);
|
|
}
|
|
}
|
|
|
|
REG_WR(sc, SRC_REG_SOFT_RST, 1);
|
|
|
|
ecore_init_block(sc, BLOCK_SRC, PHASE_COMMON);
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_0, 0x63285672);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_1, 0x24b8f2cc);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_2, 0x223aef9b);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_3, 0x26001e3a);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_4, 0x7ae91116);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_5, 0x5ce5230b);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_6, 0x298d8adf);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_7, 0x6eb0ff09);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_8, 0x1830f82f);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_9, 0x01e46be7);
|
|
}
|
|
REG_WR(sc, SRC_REG_SOFT_RST, 0);
|
|
|
|
if (sizeof(union cdu_context) != 1024) {
|
|
/* we currently assume that a context is 1024 bytes */
|
|
BLOGE(sc, "please adjust the size of cdu_context(%ld)\n",
|
|
(long)sizeof(union cdu_context));
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_CDU, PHASE_COMMON);
|
|
val = (4 << 24) + (0 << 12) + 1024;
|
|
REG_WR(sc, CDU_REG_CDU_GLOBAL_PARAMS, val);
|
|
|
|
ecore_init_block(sc, BLOCK_CFC, PHASE_COMMON);
|
|
|
|
REG_WR(sc, CFC_REG_INIT_REG, 0x7FF);
|
|
/* enable context validation interrupt from CFC */
|
|
REG_WR(sc, CFC_REG_CFC_INT_MASK, 0);
|
|
|
|
/* set the thresholds to prevent CFC/CDU race */
|
|
REG_WR(sc, CFC_REG_DEBUG0, 0x20020000);
|
|
ecore_init_block(sc, BLOCK_HC, PHASE_COMMON);
|
|
|
|
if (!CHIP_IS_E1x(sc) && BXE_NOMCP(sc)) {
|
|
REG_WR(sc, IGU_REG_RESET_MEMORIES, 0x36);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_IGU, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_MISC_AEU, PHASE_COMMON);
|
|
|
|
/* Reset PCIE errors for debug */
|
|
REG_WR(sc, 0x2814, 0xffffffff);
|
|
REG_WR(sc, 0x3820, 0xffffffff);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_CONTROL_5,
|
|
(PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 |
|
|
PXPCS_TL_CONTROL_5_ERR_UNSPPORT));
|
|
REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_FUNC345_STAT,
|
|
(PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4 |
|
|
PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3 |
|
|
PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2));
|
|
REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_FUNC678_STAT,
|
|
(PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7 |
|
|
PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6 |
|
|
PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5));
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_NIG, PHASE_COMMON);
|
|
|
|
if (!CHIP_IS_E1(sc)) {
|
|
/* in E3 this done in per-port section */
|
|
if (!CHIP_IS_E3(sc))
|
|
REG_WR(sc, NIG_REG_LLH_MF_MODE, IS_MF(sc));
|
|
}
|
|
|
|
if (CHIP_IS_E1H(sc)) {
|
|
/* not applicable for E2 (and above ...) */
|
|
REG_WR(sc, NIG_REG_LLH_E1HOV_MODE, IS_MF_SD(sc));
|
|
}
|
|
|
|
if (CHIP_REV_IS_SLOW(sc)) {
|
|
DELAY(200000);
|
|
}
|
|
|
|
/* finish CFC init */
|
|
val = reg_poll(sc, CFC_REG_LL_INIT_DONE, 1, 100, 10);
|
|
if (val != 1) {
|
|
BLOGE(sc, "CFC LL_INIT failed\n");
|
|
return (-1);
|
|
}
|
|
val = reg_poll(sc, CFC_REG_AC_INIT_DONE, 1, 100, 10);
|
|
if (val != 1) {
|
|
BLOGE(sc, "CFC AC_INIT failed\n");
|
|
return (-1);
|
|
}
|
|
val = reg_poll(sc, CFC_REG_CAM_INIT_DONE, 1, 100, 10);
|
|
if (val != 1) {
|
|
BLOGE(sc, "CFC CAM_INIT failed\n");
|
|
return (-1);
|
|
}
|
|
REG_WR(sc, CFC_REG_DEBUG0, 0);
|
|
|
|
if (CHIP_IS_E1(sc)) {
|
|
/* read NIG statistic to see if this is our first up since powerup */
|
|
bxe_read_dmae(sc, NIG_REG_STAT2_BRB_OCTET, 2);
|
|
val = *BXE_SP(sc, wb_data[0]);
|
|
|
|
/* do internal memory self test */
|
|
if ((val == 0) && bxe_int_mem_test(sc)) {
|
|
BLOGE(sc, "internal mem self test failed\n");
|
|
return (-1);
|
|
}
|
|
}
|
|
|
|
bxe_setup_fan_failure_detection(sc);
|
|
|
|
/* clear PXP2 attentions */
|
|
REG_RD(sc, PXP2_REG_PXP2_INT_STS_CLR_0);
|
|
|
|
bxe_enable_blocks_attention(sc);
|
|
|
|
if (!CHIP_REV_IS_SLOW(sc)) {
|
|
ecore_enable_blocks_parity(sc);
|
|
}
|
|
|
|
if (!BXE_NOMCP(sc)) {
|
|
if (CHIP_IS_E1x(sc)) {
|
|
bxe_common_init_phy(sc);
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/**
|
|
* bxe_init_hw_common_chip - init HW at the COMMON_CHIP phase.
|
|
*
|
|
* @sc: driver handle
|
|
*/
|
|
static int
|
|
bxe_init_hw_common_chip(struct bxe_softc *sc)
|
|
{
|
|
int rc = bxe_init_hw_common(sc);
|
|
|
|
if (rc) {
|
|
return (rc);
|
|
}
|
|
|
|
/* In E2 2-PORT mode, same ext phy is used for the two paths */
|
|
if (!BXE_NOMCP(sc)) {
|
|
bxe_common_init_phy(sc);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
bxe_init_hw_port(struct bxe_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int init_phase = port ? PHASE_PORT1 : PHASE_PORT0;
|
|
uint32_t low, high;
|
|
uint32_t val;
|
|
|
|
BLOGD(sc, DBG_LOAD, "starting port init for port %d\n", port);
|
|
|
|
REG_WR(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
|
|
|
|
ecore_init_block(sc, BLOCK_MISC, init_phase);
|
|
ecore_init_block(sc, BLOCK_PXP, init_phase);
|
|
ecore_init_block(sc, BLOCK_PXP2, init_phase);
|
|
|
|
/*
|
|
* Timers bug workaround: disables the pf_master bit in pglue at
|
|
* common phase, we need to enable it here before any dmae access are
|
|
* attempted. Therefore we manually added the enable-master to the
|
|
* port phase (it also happens in the function phase)
|
|
*/
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_ATC, init_phase);
|
|
ecore_init_block(sc, BLOCK_DMAE, init_phase);
|
|
ecore_init_block(sc, BLOCK_PGLUE_B, init_phase);
|
|
ecore_init_block(sc, BLOCK_QM, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_TCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_UCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XCM, init_phase);
|
|
|
|
/* QM cid (connection) count */
|
|
ecore_qm_init_cid_count(sc, sc->qm_cid_count, INITOP_SET);
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
ecore_init_block(sc, BLOCK_TM, init_phase);
|
|
REG_WR(sc, TM_REG_LIN0_SCAN_TIME + port*4, 20);
|
|
REG_WR(sc, TM_REG_LIN0_MAX_ACTIVE_CID + port*4, 31);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_DORQ, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_BRB1, init_phase);
|
|
|
|
if (CHIP_IS_E1(sc) || CHIP_IS_E1H(sc)) {
|
|
if (IS_MF(sc)) {
|
|
low = (BXE_ONE_PORT(sc) ? 160 : 246);
|
|
} else if (sc->mtu > 4096) {
|
|
if (BXE_ONE_PORT(sc)) {
|
|
low = 160;
|
|
} else {
|
|
val = sc->mtu;
|
|
/* (24*1024 + val*4)/256 */
|
|
low = (96 + (val / 64) + ((val % 64) ? 1 : 0));
|
|
}
|
|
} else {
|
|
low = (BXE_ONE_PORT(sc) ? 80 : 160);
|
|
}
|
|
high = (low + 56); /* 14*1024/256 */
|
|
REG_WR(sc, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port*4, low);
|
|
REG_WR(sc, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port*4, high);
|
|
}
|
|
|
|
if (CHIP_IS_MODE_4_PORT(sc)) {
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
BRB1_REG_MAC_GUARANTIED_1 :
|
|
BRB1_REG_MAC_GUARANTIED_0, 40);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_PRS, init_phase);
|
|
if (CHIP_IS_E3B0(sc)) {
|
|
if (IS_MF_AFEX(sc)) {
|
|
/* configure headers for AFEX mode */
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
PRS_REG_HDRS_AFTER_BASIC_PORT_1 :
|
|
PRS_REG_HDRS_AFTER_BASIC_PORT_0, 0xE);
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
PRS_REG_HDRS_AFTER_TAG_0_PORT_1 :
|
|
PRS_REG_HDRS_AFTER_TAG_0_PORT_0, 0x6);
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
PRS_REG_MUST_HAVE_HDRS_PORT_1 :
|
|
PRS_REG_MUST_HAVE_HDRS_PORT_0, 0xA);
|
|
} else {
|
|
/* Ovlan exists only if we are in multi-function +
|
|
* switch-dependent mode, in switch-independent there
|
|
* is no ovlan headers
|
|
*/
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
PRS_REG_HDRS_AFTER_BASIC_PORT_1 :
|
|
PRS_REG_HDRS_AFTER_BASIC_PORT_0,
|
|
(sc->devinfo.mf_info.path_has_ovlan ? 7 : 6));
|
|
}
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_TSDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CSDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_USDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XSDM, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_TSEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_USEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CSEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XSEM, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_UPB, init_phase);
|
|
ecore_init_block(sc, BLOCK_XPB, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_PBF, init_phase);
|
|
|
|
if (CHIP_IS_E1x(sc)) {
|
|
/* configure PBF to work without PAUSE mtu 9000 */
|
|
REG_WR(sc, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
|
|
|
|
/* update threshold */
|
|
REG_WR(sc, PBF_REG_P0_ARB_THRSH + port*4, (9040/16));
|
|
/* update init credit */
|
|
REG_WR(sc, PBF_REG_P0_INIT_CRD + port*4, (9040/16) + 553 - 22);
|
|
|
|
/* probe changes */
|
|
REG_WR(sc, PBF_REG_INIT_P0 + port*4, 1);
|
|
DELAY(50);
|
|
REG_WR(sc, PBF_REG_INIT_P0 + port*4, 0);
|
|
}
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
ecore_init_block(sc, BLOCK_SRC, init_phase);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_CDU, init_phase);
|
|
ecore_init_block(sc, BLOCK_CFC, init_phase);
|
|
|
|
if (CHIP_IS_E1(sc)) {
|
|
REG_WR(sc, HC_REG_LEADING_EDGE_0 + port*8, 0);
|
|
REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port*8, 0);
|
|
}
|
|
ecore_init_block(sc, BLOCK_HC, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_IGU, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_MISC_AEU, init_phase);
|
|
/* init aeu_mask_attn_func_0/1:
|
|
* - SF mode: bits 3-7 are masked. only bits 0-2 are in use
|
|
* - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
|
|
* bits 4-7 are used for "per vn group attention" */
|
|
val = IS_MF(sc) ? 0xF7 : 0x7;
|
|
/* Enable DCBX attention for all but E1 */
|
|
val |= CHIP_IS_E1(sc) ? 0 : 0x10;
|
|
REG_WR(sc, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, val);
|
|
|
|
ecore_init_block(sc, BLOCK_NIG, init_phase);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/* Bit-map indicating which L2 hdrs may appear after the
|
|
* basic Ethernet header
|
|
*/
|
|
if (IS_MF_AFEX(sc)) {
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
NIG_REG_P1_HDRS_AFTER_BASIC :
|
|
NIG_REG_P0_HDRS_AFTER_BASIC, 0xE);
|
|
} else {
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
NIG_REG_P1_HDRS_AFTER_BASIC :
|
|
NIG_REG_P0_HDRS_AFTER_BASIC,
|
|
IS_MF_SD(sc) ? 7 : 6);
|
|
}
|
|
|
|
if (CHIP_IS_E3(sc)) {
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
NIG_REG_LLH1_MF_MODE :
|
|
NIG_REG_LLH_MF_MODE, IS_MF(sc));
|
|
}
|
|
}
|
|
if (!CHIP_IS_E3(sc)) {
|
|
REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1);
|
|
}
|
|
|
|
if (!CHIP_IS_E1(sc)) {
|
|
/* 0x2 disable mf_ov, 0x1 enable */
|
|
REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port*4,
|
|
(IS_MF_SD(sc) ? 0x1 : 0x2));
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
val = 0;
|
|
switch (sc->devinfo.mf_info.mf_mode) {
|
|
case MULTI_FUNCTION_SD:
|
|
val = 1;
|
|
break;
|
|
case MULTI_FUNCTION_SI:
|
|
case MULTI_FUNCTION_AFEX:
|
|
val = 2;
|
|
break;
|
|
}
|
|
|
|
REG_WR(sc, (SC_PORT(sc) ? NIG_REG_LLH1_CLS_TYPE :
|
|
NIG_REG_LLH0_CLS_TYPE), val);
|
|
}
|
|
REG_WR(sc, NIG_REG_LLFC_ENABLE_0 + port*4, 0);
|
|
REG_WR(sc, NIG_REG_LLFC_OUT_EN_0 + port*4, 0);
|
|
REG_WR(sc, NIG_REG_PAUSE_ENABLE_0 + port*4, 1);
|
|
}
|
|
|
|
/* If SPIO5 is set to generate interrupts, enable it for this port */
|
|
val = REG_RD(sc, MISC_REG_SPIO_EVENT_EN);
|
|
if (val & MISC_SPIO_SPIO5) {
|
|
uint32_t reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
|
|
val = REG_RD(sc, reg_addr);
|
|
val |= AEU_INPUTS_ATTN_BITS_SPIO5;
|
|
REG_WR(sc, reg_addr, val);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static uint32_t
|
|
bxe_flr_clnup_reg_poll(struct bxe_softc *sc,
|
|
uint32_t reg,
|
|
uint32_t expected,
|
|
uint32_t poll_count)
|
|
{
|
|
uint32_t cur_cnt = poll_count;
|
|
uint32_t val;
|
|
|
|
while ((val = REG_RD(sc, reg)) != expected && cur_cnt--) {
|
|
DELAY(FLR_WAIT_INTERVAL);
|
|
}
|
|
|
|
return (val);
|
|
}
|
|
|
|
static int
|
|
bxe_flr_clnup_poll_hw_counter(struct bxe_softc *sc,
|
|
uint32_t reg,
|
|
char *msg,
|
|
uint32_t poll_cnt)
|
|
{
|
|
uint32_t val = bxe_flr_clnup_reg_poll(sc, reg, 0, poll_cnt);
|
|
|
|
if (val != 0) {
|
|
BLOGE(sc, "%s usage count=%d\n", msg, val);
|
|
return (1);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/* Common routines with VF FLR cleanup */
|
|
static uint32_t
|
|
bxe_flr_clnup_poll_count(struct bxe_softc *sc)
|
|
{
|
|
/* adjust polling timeout */
|
|
if (CHIP_REV_IS_EMUL(sc)) {
|
|
return (FLR_POLL_CNT * 2000);
|
|
}
|
|
|
|
if (CHIP_REV_IS_FPGA(sc)) {
|
|
return (FLR_POLL_CNT * 120);
|
|
}
|
|
|
|
return (FLR_POLL_CNT);
|
|
}
|
|
|
|
static int
|
|
bxe_poll_hw_usage_counters(struct bxe_softc *sc,
|
|
uint32_t poll_cnt)
|
|
{
|
|
/* wait for CFC PF usage-counter to zero (includes all the VFs) */
|
|
if (bxe_flr_clnup_poll_hw_counter(sc,
|
|
CFC_REG_NUM_LCIDS_INSIDE_PF,
|
|
"CFC PF usage counter timed out",
|
|
poll_cnt)) {
|
|
return (1);
|
|
}
|
|
|
|
/* Wait for DQ PF usage-counter to zero (until DQ cleanup) */
|
|
if (bxe_flr_clnup_poll_hw_counter(sc,
|
|
DORQ_REG_PF_USAGE_CNT,
|
|
"DQ PF usage counter timed out",
|
|
poll_cnt)) {
|
|
return (1);
|
|
}
|
|
|
|
/* Wait for QM PF usage-counter to zero (until DQ cleanup) */
|
|
if (bxe_flr_clnup_poll_hw_counter(sc,
|
|
QM_REG_PF_USG_CNT_0 + 4*SC_FUNC(sc),
|
|
"QM PF usage counter timed out",
|
|
poll_cnt)) {
|
|
return (1);
|
|
}
|
|
|
|
/* Wait for Timer PF usage-counters to zero (until DQ cleanup) */
|
|
if (bxe_flr_clnup_poll_hw_counter(sc,
|
|
TM_REG_LIN0_VNIC_UC + 4*SC_PORT(sc),
|
|
"Timers VNIC usage counter timed out",
|
|
poll_cnt)) {
|
|
return (1);
|
|
}
|
|
|
|
if (bxe_flr_clnup_poll_hw_counter(sc,
|
|
TM_REG_LIN0_NUM_SCANS + 4*SC_PORT(sc),
|
|
"Timers NUM_SCANS usage counter timed out",
|
|
poll_cnt)) {
|
|
return (1);
|
|
}
|
|
|
|
/* Wait DMAE PF usage counter to zero */
|
|
if (bxe_flr_clnup_poll_hw_counter(sc,
|
|
dmae_reg_go_c[INIT_DMAE_C(sc)],
|
|
"DMAE dommand register timed out",
|
|
poll_cnt)) {
|
|
return (1);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
#define OP_GEN_PARAM(param) \
|
|
(((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM)
|
|
#define OP_GEN_TYPE(type) \
|
|
(((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE)
|
|
#define OP_GEN_AGG_VECT(index) \
|
|
(((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX)
|
|
|
|
static int
|
|
bxe_send_final_clnup(struct bxe_softc *sc,
|
|
uint8_t clnup_func,
|
|
uint32_t poll_cnt)
|
|
{
|
|
uint32_t op_gen_command = 0;
|
|
uint32_t comp_addr = (BAR_CSTRORM_INTMEM +
|
|
CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func));
|
|
int ret = 0;
|
|
|
|
if (REG_RD(sc, comp_addr)) {
|
|
BLOGE(sc, "Cleanup complete was not 0 before sending\n");
|
|
return (1);
|
|
}
|
|
|
|
op_gen_command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX);
|
|
op_gen_command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE);
|
|
op_gen_command |= OP_GEN_AGG_VECT(clnup_func);
|
|
op_gen_command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT;
|
|
|
|
BLOGD(sc, DBG_LOAD, "sending FW Final cleanup\n");
|
|
REG_WR(sc, XSDM_REG_OPERATION_GEN, op_gen_command);
|
|
|
|
if (bxe_flr_clnup_reg_poll(sc, comp_addr, 1, poll_cnt) != 1) {
|
|
BLOGE(sc, "FW final cleanup did not succeed\n");
|
|
BLOGD(sc, DBG_LOAD, "At timeout completion address contained %x\n",
|
|
(REG_RD(sc, comp_addr)));
|
|
bxe_panic(sc, ("FLR cleanup failed\n"));
|
|
return (1);
|
|
}
|
|
|
|
/* Zero completion for nxt FLR */
|
|
REG_WR(sc, comp_addr, 0);
|
|
|
|
return (ret);
|
|
}
|
|
|
|
static void
|
|
bxe_pbf_pN_buf_flushed(struct bxe_softc *sc,
|
|
struct pbf_pN_buf_regs *regs,
|
|
uint32_t poll_count)
|
|
{
|
|
uint32_t init_crd, crd, crd_start, crd_freed, crd_freed_start;
|
|
uint32_t cur_cnt = poll_count;
|
|
|
|
crd_freed = crd_freed_start = REG_RD(sc, regs->crd_freed);
|
|
crd = crd_start = REG_RD(sc, regs->crd);
|
|
init_crd = REG_RD(sc, regs->init_crd);
|
|
|
|
BLOGD(sc, DBG_LOAD, "INIT CREDIT[%d] : %x\n", regs->pN, init_crd);
|
|
BLOGD(sc, DBG_LOAD, "CREDIT[%d] : s:%x\n", regs->pN, crd);
|
|
BLOGD(sc, DBG_LOAD, "CREDIT_FREED[%d]: s:%x\n", regs->pN, crd_freed);
|
|
|
|
while ((crd != init_crd) &&
|
|
((uint32_t)((int32_t)crd_freed - (int32_t)crd_freed_start) <
|
|
(init_crd - crd_start))) {
|
|
if (cur_cnt--) {
|
|
DELAY(FLR_WAIT_INTERVAL);
|
|
crd = REG_RD(sc, regs->crd);
|
|
crd_freed = REG_RD(sc, regs->crd_freed);
|
|
} else {
|
|
BLOGD(sc, DBG_LOAD, "PBF tx buffer[%d] timed out\n", regs->pN);
|
|
BLOGD(sc, DBG_LOAD, "CREDIT[%d] : c:%x\n", regs->pN, crd);
|
|
BLOGD(sc, DBG_LOAD, "CREDIT_FREED[%d]: c:%x\n", regs->pN, crd_freed);
|
|
break;
|
|
}
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "Waited %d*%d usec for PBF tx buffer[%d]\n",
|
|
poll_count-cur_cnt, FLR_WAIT_INTERVAL, regs->pN);
|
|
}
|
|
|
|
static void
|
|
bxe_pbf_pN_cmd_flushed(struct bxe_softc *sc,
|
|
struct pbf_pN_cmd_regs *regs,
|
|
uint32_t poll_count)
|
|
{
|
|
uint32_t occup, to_free, freed, freed_start;
|
|
uint32_t cur_cnt = poll_count;
|
|
|
|
occup = to_free = REG_RD(sc, regs->lines_occup);
|
|
freed = freed_start = REG_RD(sc, regs->lines_freed);
|
|
|
|
BLOGD(sc, DBG_LOAD, "OCCUPANCY[%d] : s:%x\n", regs->pN, occup);
|
|
BLOGD(sc, DBG_LOAD, "LINES_FREED[%d] : s:%x\n", regs->pN, freed);
|
|
|
|
while (occup &&
|
|
((uint32_t)((int32_t)freed - (int32_t)freed_start) < to_free)) {
|
|
if (cur_cnt--) {
|
|
DELAY(FLR_WAIT_INTERVAL);
|
|
occup = REG_RD(sc, regs->lines_occup);
|
|
freed = REG_RD(sc, regs->lines_freed);
|
|
} else {
|
|
BLOGD(sc, DBG_LOAD, "PBF cmd queue[%d] timed out\n", regs->pN);
|
|
BLOGD(sc, DBG_LOAD, "OCCUPANCY[%d] : s:%x\n", regs->pN, occup);
|
|
BLOGD(sc, DBG_LOAD, "LINES_FREED[%d] : s:%x\n", regs->pN, freed);
|
|
break;
|
|
}
|
|
}
|
|
|
|
BLOGD(sc, DBG_LOAD, "Waited %d*%d usec for PBF cmd queue[%d]\n",
|
|
poll_count - cur_cnt, FLR_WAIT_INTERVAL, regs->pN);
|
|
}
|
|
|
|
static void
|
|
bxe_tx_hw_flushed(struct bxe_softc *sc, uint32_t poll_count)
|
|
{
|
|
struct pbf_pN_cmd_regs cmd_regs[] = {
|
|
{0, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_OCCUPANCY_Q0 :
|
|
PBF_REG_P0_TQ_OCCUPANCY,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_LINES_FREED_CNT_Q0 :
|
|
PBF_REG_P0_TQ_LINES_FREED_CNT},
|
|
{1, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_OCCUPANCY_Q1 :
|
|
PBF_REG_P1_TQ_OCCUPANCY,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_LINES_FREED_CNT_Q1 :
|
|
PBF_REG_P1_TQ_LINES_FREED_CNT},
|
|
{4, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_OCCUPANCY_LB_Q :
|
|
PBF_REG_P4_TQ_OCCUPANCY,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_LINES_FREED_CNT_LB_Q :
|
|
PBF_REG_P4_TQ_LINES_FREED_CNT}
|
|
};
|
|
|
|
struct pbf_pN_buf_regs buf_regs[] = {
|
|
{0, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INIT_CRD_Q0 :
|
|
PBF_REG_P0_INIT_CRD ,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_CREDIT_Q0 :
|
|
PBF_REG_P0_CREDIT,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 :
|
|
PBF_REG_P0_INTERNAL_CRD_FREED_CNT},
|
|
{1, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INIT_CRD_Q1 :
|
|
PBF_REG_P1_INIT_CRD,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_CREDIT_Q1 :
|
|
PBF_REG_P1_CREDIT,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 :
|
|
PBF_REG_P1_INTERNAL_CRD_FREED_CNT},
|
|
{4, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INIT_CRD_LB_Q :
|
|
PBF_REG_P4_INIT_CRD,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_CREDIT_LB_Q :
|
|
PBF_REG_P4_CREDIT,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q :
|
|
PBF_REG_P4_INTERNAL_CRD_FREED_CNT},
|
|
};
|
|
|
|
int i;
|
|
|
|
/* Verify the command queues are flushed P0, P1, P4 */
|
|
for (i = 0; i < ARRAY_SIZE(cmd_regs); i++) {
|
|
bxe_pbf_pN_cmd_flushed(sc, &cmd_regs[i], poll_count);
|
|
}
|
|
|
|
/* Verify the transmission buffers are flushed P0, P1, P4 */
|
|
for (i = 0; i < ARRAY_SIZE(buf_regs); i++) {
|
|
bxe_pbf_pN_buf_flushed(sc, &buf_regs[i], poll_count);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_hw_enable_status(struct bxe_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
|
|
val = REG_RD(sc, CFC_REG_WEAK_ENABLE_PF);
|
|
BLOGD(sc, DBG_LOAD, "CFC_REG_WEAK_ENABLE_PF is 0x%x\n", val);
|
|
|
|
val = REG_RD(sc, PBF_REG_DISABLE_PF);
|
|
BLOGD(sc, DBG_LOAD, "PBF_REG_DISABLE_PF is 0x%x\n", val);
|
|
|
|
val = REG_RD(sc, IGU_REG_PCI_PF_MSI_EN);
|
|
BLOGD(sc, DBG_LOAD, "IGU_REG_PCI_PF_MSI_EN is 0x%x\n", val);
|
|
|
|
val = REG_RD(sc, IGU_REG_PCI_PF_MSIX_EN);
|
|
BLOGD(sc, DBG_LOAD, "IGU_REG_PCI_PF_MSIX_EN is 0x%x\n", val);
|
|
|
|
val = REG_RD(sc, IGU_REG_PCI_PF_MSIX_FUNC_MASK);
|
|
BLOGD(sc, DBG_LOAD, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x\n", val);
|
|
|
|
val = REG_RD(sc, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR);
|
|
BLOGD(sc, DBG_LOAD, "PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x\n", val);
|
|
|
|
val = REG_RD(sc, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR);
|
|
BLOGD(sc, DBG_LOAD, "PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x\n", val);
|
|
|
|
val = REG_RD(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER);
|
|
BLOGD(sc, DBG_LOAD, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x\n", val);
|
|
}
|
|
|
|
static int
|
|
bxe_pf_flr_clnup(struct bxe_softc *sc)
|
|
{
|
|
uint32_t poll_cnt = bxe_flr_clnup_poll_count(sc);
|
|
|
|
BLOGD(sc, DBG_LOAD, "Cleanup after FLR PF[%d]\n", SC_ABS_FUNC(sc));
|
|
|
|
/* Re-enable PF target read access */
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
|
|
|
|
/* Poll HW usage counters */
|
|
BLOGD(sc, DBG_LOAD, "Polling usage counters\n");
|
|
if (bxe_poll_hw_usage_counters(sc, poll_cnt)) {
|
|
return (-1);
|
|
}
|
|
|
|
/* Zero the igu 'trailing edge' and 'leading edge' */
|
|
|
|
/* Send the FW cleanup command */
|
|
if (bxe_send_final_clnup(sc, (uint8_t)SC_FUNC(sc), poll_cnt)) {
|
|
return (-1);
|
|
}
|
|
|
|
/* ATC cleanup */
|
|
|
|
/* Verify TX hw is flushed */
|
|
bxe_tx_hw_flushed(sc, poll_cnt);
|
|
|
|
/* Wait 100ms (not adjusted according to platform) */
|
|
DELAY(100000);
|
|
|
|
/* Verify no pending pci transactions */
|
|
if (bxe_is_pcie_pending(sc)) {
|
|
BLOGE(sc, "PCIE Transactions still pending\n");
|
|
}
|
|
|
|
/* Debug */
|
|
bxe_hw_enable_status(sc);
|
|
|
|
/*
|
|
* Master enable - Due to WB DMAE writes performed before this
|
|
* register is re-initialized as part of the regular function init
|
|
*/
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
|
|
|
|
return (0);
|
|
}
|
|
|
|
#if 0
|
|
static void
|
|
bxe_init_searcher(struct bxe_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
ecore_src_init_t2(sc, sc->t2, sc->t2_mapping, SRC_CONN_NUM);
|
|
/* T1 hash bits value determines the T1 number of entries */
|
|
REG_WR(sc, SRC_REG_NUMBER_HASH_BITS0 + port*4, SRC_HASH_BITS);
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
bxe_init_hw_func(struct bxe_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int func = SC_FUNC(sc);
|
|
int init_phase = PHASE_PF0 + func;
|
|
struct ecore_ilt *ilt = sc->ilt;
|
|
uint16_t cdu_ilt_start;
|
|
uint32_t addr, val;
|
|
uint32_t main_mem_base, main_mem_size, main_mem_prty_clr;
|
|
int i, main_mem_width, rc;
|
|
|
|
BLOGD(sc, DBG_LOAD, "starting func init for func %d\n", func);
|
|
|
|
/* FLR cleanup */
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
rc = bxe_pf_flr_clnup(sc);
|
|
if (rc) {
|
|
BLOGE(sc, "FLR cleanup failed!\n");
|
|
// XXX bxe_fw_dump(sc);
|
|
// XXX bxe_idle_chk(sc);
|
|
return (rc);
|
|
}
|
|
}
|
|
|
|
/* set MSI reconfigure capability */
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0);
|
|
val = REG_RD(sc, addr);
|
|
val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0;
|
|
REG_WR(sc, addr, val);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_PXP, init_phase);
|
|
ecore_init_block(sc, BLOCK_PXP2, init_phase);
|
|
|
|
ilt = sc->ilt;
|
|
cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start;
|
|
|
|
#if 0
|
|
if (IS_SRIOV(sc)) {
|
|
cdu_ilt_start += BXE_FIRST_VF_CID/ILT_PAGE_CIDS;
|
|
}
|
|
cdu_ilt_start = bxe_iov_init_ilt(sc, cdu_ilt_start);
|
|
|
|
#if (BXE_FIRST_VF_CID > 0)
|
|
/*
|
|
* If BXE_FIRST_VF_CID > 0 then the PF L2 cids precedes
|
|
* those of the VFs, so start line should be reset
|
|
*/
|
|
cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start;
|
|
#endif
|
|
#endif
|
|
|
|
for (i = 0; i < L2_ILT_LINES(sc); i++) {
|
|
ilt->lines[cdu_ilt_start + i].page = sc->context[i].vcxt;
|
|
ilt->lines[cdu_ilt_start + i].page_mapping =
|
|
sc->context[i].vcxt_dma.paddr;
|
|
ilt->lines[cdu_ilt_start + i].size = sc->context[i].size;
|
|
}
|
|
ecore_ilt_init_op(sc, INITOP_SET);
|
|
|
|
#if 0
|
|
if (!CONFIGURE_NIC_MODE(sc)) {
|
|
bxe_init_searcher(sc);
|
|
REG_WR(sc, PRS_REG_NIC_MODE, 0);
|
|
BLOGD(sc, DBG_LOAD, "NIC MODE disabled\n");
|
|
} else
|
|
#endif
|
|
{
|
|
/* Set NIC mode */
|
|
REG_WR(sc, PRS_REG_NIC_MODE, 1);
|
|
BLOGD(sc, DBG_LOAD, "NIC MODE configured\n");
|
|
}
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
uint32_t pf_conf = IGU_PF_CONF_FUNC_EN;
|
|
|
|
/* Turn on a single ISR mode in IGU if driver is going to use
|
|
* INT#x or MSI
|
|
*/
|
|
if (sc->interrupt_mode != INTR_MODE_MSIX) {
|
|
pf_conf |= IGU_PF_CONF_SINGLE_ISR_EN;
|
|
}
|
|
|
|
/*
|
|
* Timers workaround bug: function init part.
|
|
* Need to wait 20msec after initializing ILT,
|
|
* needed to make sure there are no requests in
|
|
* one of the PXP internal queues with "old" ILT addresses
|
|
*/
|
|
DELAY(20000);
|
|
|
|
/*
|
|
* Master enable - Due to WB DMAE writes performed before this
|
|
* register is re-initialized as part of the regular function
|
|
* init
|
|
*/
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
|
|
/* Enable the function in IGU */
|
|
REG_WR(sc, IGU_REG_PF_CONFIGURATION, pf_conf);
|
|
}
|
|
|
|
sc->dmae_ready = 1;
|
|
|
|
ecore_init_block(sc, BLOCK_PGLUE_B, init_phase);
|
|
|
|
if (!CHIP_IS_E1x(sc))
|
|
REG_WR(sc, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, func);
|
|
|
|
ecore_init_block(sc, BLOCK_ATC, init_phase);
|
|
ecore_init_block(sc, BLOCK_DMAE, init_phase);
|
|
ecore_init_block(sc, BLOCK_NIG, init_phase);
|
|
ecore_init_block(sc, BLOCK_SRC, init_phase);
|
|
ecore_init_block(sc, BLOCK_MISC, init_phase);
|
|
ecore_init_block(sc, BLOCK_TCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_UCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_TSEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_USEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CSEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XSEM, init_phase);
|
|
|
|
if (!CHIP_IS_E1x(sc))
|
|
REG_WR(sc, QM_REG_PF_EN, 1);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, TSEM_REG_VFPF_ERR_NUM, BXE_MAX_NUM_OF_VFS + func);
|
|
REG_WR(sc, USEM_REG_VFPF_ERR_NUM, BXE_MAX_NUM_OF_VFS + func);
|
|
REG_WR(sc, CSEM_REG_VFPF_ERR_NUM, BXE_MAX_NUM_OF_VFS + func);
|
|
REG_WR(sc, XSEM_REG_VFPF_ERR_NUM, BXE_MAX_NUM_OF_VFS + func);
|
|
}
|
|
ecore_init_block(sc, BLOCK_QM, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_TM, init_phase);
|
|
ecore_init_block(sc, BLOCK_DORQ, init_phase);
|
|
|
|
bxe_iov_init_dq(sc);
|
|
|
|
ecore_init_block(sc, BLOCK_BRB1, init_phase);
|
|
ecore_init_block(sc, BLOCK_PRS, init_phase);
|
|
ecore_init_block(sc, BLOCK_TSDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CSDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_USDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XSDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_UPB, init_phase);
|
|
ecore_init_block(sc, BLOCK_XPB, init_phase);
|
|
ecore_init_block(sc, BLOCK_PBF, init_phase);
|
|
if (!CHIP_IS_E1x(sc))
|
|
REG_WR(sc, PBF_REG_DISABLE_PF, 0);
|
|
|
|
ecore_init_block(sc, BLOCK_CDU, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_CFC, init_phase);
|
|
|
|
if (!CHIP_IS_E1x(sc))
|
|
REG_WR(sc, CFC_REG_WEAK_ENABLE_PF, 1);
|
|
|
|
if (IS_MF(sc)) {
|
|
REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port*8, 1);
|
|
REG_WR(sc, NIG_REG_LLH0_FUNC_VLAN_ID + port*8, OVLAN(sc));
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_MISC_AEU, init_phase);
|
|
|
|
/* HC init per function */
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
if (CHIP_IS_E1H(sc)) {
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
|
|
|
|
REG_WR(sc, HC_REG_LEADING_EDGE_0 + port*8, 0);
|
|
REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port*8, 0);
|
|
}
|
|
ecore_init_block(sc, BLOCK_HC, init_phase);
|
|
|
|
} else {
|
|
int num_segs, sb_idx, prod_offset;
|
|
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, 0);
|
|
REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, 0);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_IGU, init_phase);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
int dsb_idx = 0;
|
|
/**
|
|
* Producer memory:
|
|
* E2 mode: address 0-135 match to the mapping memory;
|
|
* 136 - PF0 default prod; 137 - PF1 default prod;
|
|
* 138 - PF2 default prod; 139 - PF3 default prod;
|
|
* 140 - PF0 attn prod; 141 - PF1 attn prod;
|
|
* 142 - PF2 attn prod; 143 - PF3 attn prod;
|
|
* 144-147 reserved.
|
|
*
|
|
* E1.5 mode - In backward compatible mode;
|
|
* for non default SB; each even line in the memory
|
|
* holds the U producer and each odd line hold
|
|
* the C producer. The first 128 producers are for
|
|
* NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20
|
|
* producers are for the DSB for each PF.
|
|
* Each PF has five segments: (the order inside each
|
|
* segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
|
|
* 132-135 C prods; 136-139 X prods; 140-143 T prods;
|
|
* 144-147 attn prods;
|
|
*/
|
|
/* non-default-status-blocks */
|
|
num_segs = CHIP_INT_MODE_IS_BC(sc) ?
|
|
IGU_BC_NDSB_NUM_SEGS : IGU_NORM_NDSB_NUM_SEGS;
|
|
for (sb_idx = 0; sb_idx < sc->igu_sb_cnt; sb_idx++) {
|
|
prod_offset = (sc->igu_base_sb + sb_idx) *
|
|
num_segs;
|
|
|
|
for (i = 0; i < num_segs; i++) {
|
|
addr = IGU_REG_PROD_CONS_MEMORY +
|
|
(prod_offset + i) * 4;
|
|
REG_WR(sc, addr, 0);
|
|
}
|
|
/* send consumer update with value 0 */
|
|
bxe_ack_sb(sc, sc->igu_base_sb + sb_idx,
|
|
USTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bxe_igu_clear_sb(sc, sc->igu_base_sb + sb_idx);
|
|
}
|
|
|
|
/* default-status-blocks */
|
|
num_segs = CHIP_INT_MODE_IS_BC(sc) ?
|
|
IGU_BC_DSB_NUM_SEGS : IGU_NORM_DSB_NUM_SEGS;
|
|
|
|
if (CHIP_IS_MODE_4_PORT(sc))
|
|
dsb_idx = SC_FUNC(sc);
|
|
else
|
|
dsb_idx = SC_VN(sc);
|
|
|
|
prod_offset = (CHIP_INT_MODE_IS_BC(sc) ?
|
|
IGU_BC_BASE_DSB_PROD + dsb_idx :
|
|
IGU_NORM_BASE_DSB_PROD + dsb_idx);
|
|
|
|
/*
|
|
* igu prods come in chunks of E1HVN_MAX (4) -
|
|
* does not matters what is the current chip mode
|
|
*/
|
|
for (i = 0; i < (num_segs * E1HVN_MAX);
|
|
i += E1HVN_MAX) {
|
|
addr = IGU_REG_PROD_CONS_MEMORY +
|
|
(prod_offset + i)*4;
|
|
REG_WR(sc, addr, 0);
|
|
}
|
|
/* send consumer update with 0 */
|
|
if (CHIP_INT_MODE_IS_BC(sc)) {
|
|
bxe_ack_sb(sc, sc->igu_dsb_id,
|
|
USTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bxe_ack_sb(sc, sc->igu_dsb_id,
|
|
CSTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bxe_ack_sb(sc, sc->igu_dsb_id,
|
|
XSTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bxe_ack_sb(sc, sc->igu_dsb_id,
|
|
TSTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bxe_ack_sb(sc, sc->igu_dsb_id,
|
|
ATTENTION_ID, 0, IGU_INT_NOP, 1);
|
|
} else {
|
|
bxe_ack_sb(sc, sc->igu_dsb_id,
|
|
USTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bxe_ack_sb(sc, sc->igu_dsb_id,
|
|
ATTENTION_ID, 0, IGU_INT_NOP, 1);
|
|
}
|
|
bxe_igu_clear_sb(sc, sc->igu_dsb_id);
|
|
|
|
/* !!! these should become driver const once
|
|
rf-tool supports split-68 const */
|
|
REG_WR(sc, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0);
|
|
REG_WR(sc, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0);
|
|
REG_WR(sc, IGU_REG_SB_MASK_LSB, 0);
|
|
REG_WR(sc, IGU_REG_SB_MASK_MSB, 0);
|
|
REG_WR(sc, IGU_REG_PBA_STATUS_LSB, 0);
|
|
REG_WR(sc, IGU_REG_PBA_STATUS_MSB, 0);
|
|
}
|
|
}
|
|
|
|
/* Reset PCIE errors for debug */
|
|
REG_WR(sc, 0x2114, 0xffffffff);
|
|
REG_WR(sc, 0x2120, 0xffffffff);
|
|
|
|
if (CHIP_IS_E1x(sc)) {
|
|
main_mem_size = HC_REG_MAIN_MEMORY_SIZE / 2; /*dwords*/
|
|
main_mem_base = HC_REG_MAIN_MEMORY +
|
|
SC_PORT(sc) * (main_mem_size * 4);
|
|
main_mem_prty_clr = HC_REG_HC_PRTY_STS_CLR;
|
|
main_mem_width = 8;
|
|
|
|
val = REG_RD(sc, main_mem_prty_clr);
|
|
if (val) {
|
|
BLOGD(sc, DBG_LOAD,
|
|
"Parity errors in HC block during function init (0x%x)!\n",
|
|
val);
|
|
}
|
|
|
|
/* Clear "false" parity errors in MSI-X table */
|
|
for (i = main_mem_base;
|
|
i < main_mem_base + main_mem_size * 4;
|
|
i += main_mem_width) {
|
|
bxe_read_dmae(sc, i, main_mem_width / 4);
|
|
bxe_write_dmae(sc, BXE_SP_MAPPING(sc, wb_data),
|
|
i, main_mem_width / 4);
|
|
}
|
|
/* Clear HC parity attention */
|
|
REG_RD(sc, main_mem_prty_clr);
|
|
}
|
|
|
|
#if 1
|
|
/* Enable STORMs SP logging */
|
|
REG_WR8(sc, BAR_USTRORM_INTMEM +
|
|
USTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
|
|
REG_WR8(sc, BAR_TSTRORM_INTMEM +
|
|
TSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
|
|
REG_WR8(sc, BAR_CSTRORM_INTMEM +
|
|
CSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
|
|
REG_WR8(sc, BAR_XSTRORM_INTMEM +
|
|
XSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
|
|
#endif
|
|
|
|
elink_phy_probe(&sc->link_params);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bxe_link_reset(struct bxe_softc *sc)
|
|
{
|
|
if (!BXE_NOMCP(sc)) {
|
|
BXE_PHY_LOCK(sc);
|
|
elink_lfa_reset(&sc->link_params, &sc->link_vars);
|
|
BXE_PHY_UNLOCK(sc);
|
|
} else {
|
|
if (!CHIP_REV_IS_SLOW(sc)) {
|
|
BLOGW(sc, "Bootcode is missing - cannot reset link\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_reset_port(struct bxe_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t val;
|
|
|
|
/* reset physical Link */
|
|
bxe_link_reset(sc);
|
|
|
|
REG_WR(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
|
|
|
|
/* Do not rcv packets to BRB */
|
|
REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK + port*4, 0x0);
|
|
/* Do not direct rcv packets that are not for MCP to the BRB */
|
|
REG_WR(sc, (port ? NIG_REG_LLH1_BRB1_NOT_MCP :
|
|
NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
|
|
|
|
/* Configure AEU */
|
|
REG_WR(sc, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, 0);
|
|
|
|
DELAY(100000);
|
|
|
|
/* Check for BRB port occupancy */
|
|
val = REG_RD(sc, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4);
|
|
if (val) {
|
|
BLOGD(sc, DBG_LOAD,
|
|
"BRB1 is not empty, %d blocks are occupied\n", val);
|
|
}
|
|
|
|
/* TODO: Close Doorbell port? */
|
|
}
|
|
|
|
static void
|
|
bxe_ilt_wr(struct bxe_softc *sc,
|
|
uint32_t index,
|
|
bus_addr_t addr)
|
|
{
|
|
int reg;
|
|
uint32_t wb_write[2];
|
|
|
|
if (CHIP_IS_E1(sc)) {
|
|
reg = PXP2_REG_RQ_ONCHIP_AT + index*8;
|
|
} else {
|
|
reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index*8;
|
|
}
|
|
|
|
wb_write[0] = ONCHIP_ADDR1(addr);
|
|
wb_write[1] = ONCHIP_ADDR2(addr);
|
|
REG_WR_DMAE(sc, reg, wb_write, 2);
|
|
}
|
|
|
|
static void
|
|
bxe_clear_func_ilt(struct bxe_softc *sc,
|
|
uint32_t func)
|
|
{
|
|
uint32_t i, base = FUNC_ILT_BASE(func);
|
|
for (i = base; i < base + ILT_PER_FUNC; i++) {
|
|
bxe_ilt_wr(sc, i, 0);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bxe_reset_func(struct bxe_softc *sc)
|
|
{
|
|
struct bxe_fastpath *fp;
|
|
int port = SC_PORT(sc);
|
|
int func = SC_FUNC(sc);
|
|
int i;
|
|
|
|
/* Disable the function in the FW */
|
|
REG_WR8(sc, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(func), 0);
|
|
REG_WR8(sc, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(func), 0);
|
|
REG_WR8(sc, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(func), 0);
|
|
REG_WR8(sc, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(func), 0);
|
|
|
|
/* FP SBs */
|
|
FOR_EACH_ETH_QUEUE(sc, i) {
|
|
fp = &sc->fp[i];
|
|
REG_WR8(sc, BAR_CSTRORM_INTMEM +
|
|
CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp->fw_sb_id),
|
|
SB_DISABLED);
|
|
}
|
|
|
|
#if 0
|
|
if (CNIC_LOADED(sc)) {
|
|
/* CNIC SB */
|
|
REG_WR8(sc, BAR_CSTRORM_INTMEM +
|
|
CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET
|
|
(bxe_cnic_fw_sb_id(sc)), SB_DISABLED);
|
|
}
|
|
#endif
|
|
|
|
/* SP SB */
|
|
REG_WR8(sc, BAR_CSTRORM_INTMEM +
|
|
CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func),
|
|
SB_DISABLED);
|
|
|
|
for (i = 0; i < XSTORM_SPQ_DATA_SIZE / 4; i++) {
|
|
REG_WR(sc, BAR_XSTRORM_INTMEM + XSTORM_SPQ_DATA_OFFSET(func), 0);
|
|
}
|
|
|
|
/* Configure IGU */
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
REG_WR(sc, HC_REG_LEADING_EDGE_0 + port*8, 0);
|
|
REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port*8, 0);
|
|
} else {
|
|
REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, 0);
|
|
REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, 0);
|
|
}
|
|
|
|
if (CNIC_LOADED(sc)) {
|
|
/* Disable Timer scan */
|
|
REG_WR(sc, TM_REG_EN_LINEAR0_TIMER + port*4, 0);
|
|
/*
|
|
* Wait for at least 10ms and up to 2 second for the timers
|
|
* scan to complete
|
|
*/
|
|
for (i = 0; i < 200; i++) {
|
|
DELAY(10000);
|
|
if (!REG_RD(sc, TM_REG_LIN0_SCAN_ON + port*4))
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Clear ILT */
|
|
bxe_clear_func_ilt(sc, func);
|
|
|
|
/*
|
|
* Timers workaround bug for E2: if this is vnic-3,
|
|
* we need to set the entire ilt range for this timers.
|
|
*/
|
|
if (!CHIP_IS_E1x(sc) && SC_VN(sc) == 3) {
|
|
struct ilt_client_info ilt_cli;
|
|
/* use dummy TM client */
|
|
memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
|
|
ilt_cli.start = 0;
|
|
ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
|
|
ilt_cli.client_num = ILT_CLIENT_TM;
|
|
|
|
ecore_ilt_boundry_init_op(sc, &ilt_cli, 0, INITOP_CLEAR);
|
|
}
|
|
|
|
/* this assumes that reset_port() called before reset_func()*/
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
bxe_pf_disable(sc);
|
|
}
|
|
|
|
sc->dmae_ready = 0;
|
|
}
|
|
|
|
static int
|
|
bxe_gunzip_init(struct bxe_softc *sc)
|
|
{
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bxe_gunzip_end(struct bxe_softc *sc)
|
|
{
|
|
return;
|
|
}
|
|
|
|
static int
|
|
bxe_init_firmware(struct bxe_softc *sc)
|
|
{
|
|
if (CHIP_IS_E1(sc)) {
|
|
ecore_init_e1_firmware(sc);
|
|
sc->iro_array = e1_iro_arr;
|
|
} else if (CHIP_IS_E1H(sc)) {
|
|
ecore_init_e1h_firmware(sc);
|
|
sc->iro_array = e1h_iro_arr;
|
|
} else if (!CHIP_IS_E1x(sc)) {
|
|
ecore_init_e2_firmware(sc);
|
|
sc->iro_array = e2_iro_arr;
|
|
} else {
|
|
BLOGE(sc, "Unsupported chip revision\n");
|
|
return (-1);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
bxe_release_firmware(struct bxe_softc *sc)
|
|
{
|
|
/* Do nothing */
|
|
return;
|
|
}
|
|
|
|
static int
|
|
ecore_gunzip(struct bxe_softc *sc,
|
|
const uint8_t *zbuf,
|
|
int len)
|
|
{
|
|
/* XXX : Implement... */
|
|
BLOGD(sc, DBG_LOAD, "ECORE_GUNZIP NOT IMPLEMENTED\n");
|
|
return (FALSE);
|
|
}
|
|
|
|
static void
|
|
ecore_reg_wr_ind(struct bxe_softc *sc,
|
|
uint32_t addr,
|
|
uint32_t val)
|
|
{
|
|
bxe_reg_wr_ind(sc, addr, val);
|
|
}
|
|
|
|
static void
|
|
ecore_write_dmae_phys_len(struct bxe_softc *sc,
|
|
bus_addr_t phys_addr,
|
|
uint32_t addr,
|
|
uint32_t len)
|
|
{
|
|
bxe_write_dmae_phys_len(sc, phys_addr, addr, len);
|
|
}
|
|
|
|
void
|
|
ecore_storm_memset_struct(struct bxe_softc *sc,
|
|
uint32_t addr,
|
|
size_t size,
|
|
uint32_t *data)
|
|
{
|
|
uint8_t i;
|
|
for (i = 0; i < size/4; i++) {
|
|
REG_WR(sc, addr + (i * 4), data[i]);
|
|
}
|
|
}
|
|
|