d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
573044a926
freebsd-nq/sys/amd64/isa/icu_vector.S
Peter Wemm afa8862328 Commit MD parts of a loosely functional AMD64 port. This is based on 
a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to
attempt to get a stable base to start from.  There is a lot missing still.
Worth noting:
- The kernel runs at 1GB in order to cheat with the pmap code.  pmap uses
  a variation of the PAE code in order to avoid having to worry about 4
  levels of page tables yet.
- It boots in 64 bit "long mode" with a tiny trampoline embedded in the
  i386 loader.  This simplifies locore.s greatly.
- There are still quite a few fragments of i386-specific code that have
  not been translated yet, and some that I cheated and wrote dumb C
  versions of (bcopy etc).
- It has both int 0x80 for syscalls (but using registers for argument
  passing, as is native on the amd64 ABI), and the 'syscall' instruction
  for syscalls.  int 0x80 preserves all registers, 'syscall' does not.
- I have tried to minimize looking at the NetBSD code, except in a couple
  of places (eg: to find which register they use to replace the trashed
  %rcx register in the syscall instruction).  As a result, there is not a
  lot of similarity.  I did look at NetBSD a few times while debugging to
  get some ideas about what I might have done wrong in my first attempt.
2003-05-01 01:05:25 +00:00

143 lines
4.7 KiB
ArmAsm
Raw Blame History

/*
* from: vector.s, 386BSD 0.1 unknown origin
* $FreeBSD$
*/
#define IRQ_BIT(irq_num) (1 << ((irq_num) % 8))
#define IRQ_BYTE(irq_num) ((irq_num) >> 3)
#define ENABLE_ICU1 \
movb $ICU_EOI,%al ; /* as soon as possible send EOI ... */ \
outb %al,$IO_ICU1 /* ... to clear in service bit */
#define ENABLE_ICU1_AND_2 \
movb $ICU_EOI,%al ; /* as above */ \
outb %al,$IO_ICU2 ; /* but do second icu first ... */ \
outb %al,$IO_ICU1 /* ... then first icu */
/*
* Macros for interrupt interrupt entry, call to handler, and exit.
*/
#define FAST_INTR(irq_num, vec_name, enable_icus) \
.text ; \
SUPERALIGN_TEXT ; \
IDTVEC(vec_name) ; \
subq $TF_RIP,%rsp ; /* skip dummy tf_err and tf_trapno */ \
movq %rdi,TF_RDI(%rsp) ; \
movq %rsi,TF_RSI(%rsp) ; \
movq %rdx,TF_RDX(%rsp) ; \
movq %rcx,TF_RCX(%rsp) ; \
movq %r8,TF_R8(%rsp) ; \
movq %r9,TF_R9(%rsp) ; \
movq %rax,TF_RAX(%rsp) ; \
movq %rbx,TF_RBX(%rsp) ; \
movq %rbp,TF_RBP(%rsp) ; \
movq %r10,TF_R10(%rsp) ; \
movq %r11,TF_R11(%rsp) ; \
movq %r12,TF_R12(%rsp) ; \
movq %r13,TF_R13(%rsp) ; \
movq %r14,TF_R14(%rsp) ; \
movq %r15,TF_R15(%rsp) ; \
FAKE_MCOUNT((12)*4(%rsp)) ; \
call critical_enter ; \
movq PCPU(CURTHREAD),%rbx ; \
incl TD_INTR_NESTING_LEVEL(%rbx) ; \
movq intr_unit + (irq_num) * 8, %rdi ; \
call *intr_handler + (irq_num) * 8 ; /* do the work ASAP */ \
enable_icus ; /* (re)enable ASAP (helps edge trigger?) */ \
incl cnt+V_INTR ; /* book-keeping can wait */ \
movq intr_countp + (irq_num) * 8,%rax ; \
incq (%rax) ; \
decl TD_INTR_NESTING_LEVEL(%rbx) ; \
call critical_exit ; \
MEXITCOUNT ; \
jmp doreti
/*
* Slow, threaded interrupts.
*
* XXX Most of the parameters here are obsolete. Fix this when we're
* done.
* XXX we really shouldn't return via doreti if we just schedule the
* interrupt handler and don't run anything. We could just do an
* iret. FIXME.
*/
#define INTR(irq_num, vec_name, icu, enable_icus, maybe_extra_ipending) \
.text ; \
SUPERALIGN_TEXT ; \
IDTVEC(vec_name) ; \
subq $TF_RIP,%rsp ; /* skip dummy tf_err and tf_trapno */ \
movq %rdi,TF_RDI(%rsp) ; \
movq %rsi,TF_RSI(%rsp) ; \
movq %rdx,TF_RDX(%rsp) ; \
movq %rcx,TF_RCX(%rsp) ; \
movq %r8,TF_R8(%rsp) ; \
movq %r9,TF_R9(%rsp) ; \
movq %rax,TF_RAX(%rsp) ; \
movq %rbx,TF_RBX(%rsp) ; \
movq %rbp,TF_RBP(%rsp) ; \
movq %r10,TF_R10(%rsp) ; \
movq %r11,TF_R11(%rsp) ; \
movq %r12,TF_R12(%rsp) ; \
movq %r13,TF_R13(%rsp) ; \
movq %r14,TF_R14(%rsp) ; \
movq %r15,TF_R15(%rsp) ; \
maybe_extra_ipending ; \
movb imen + IRQ_BYTE(irq_num),%al ; \
orb $IRQ_BIT(irq_num),%al ; \
movb %al,imen + IRQ_BYTE(irq_num) ; \
outb %al,$icu+ICU_IMR_OFFSET ; \
enable_icus ; \
movq PCPU(CURTHREAD),%rbx ; \
incl TD_INTR_NESTING_LEVEL(%rbx) ; \
FAKE_MCOUNT(13*4(%rsp)) ; /* XXX late to avoid double count */ \
movq $irq_num, %rdi; /* pass the IRQ */ \
call sched_ithd ; \
decl TD_INTR_NESTING_LEVEL(%rbx) ; \
MEXITCOUNT ; \
/* We could usually avoid the following jmp by inlining some of */ \
/* doreti, but it's probably better to use less cache. */ \
jmp doreti
MCOUNT_LABEL(bintr)
FAST_INTR(0,fastintr0, ENABLE_ICU1)
FAST_INTR(1,fastintr1, ENABLE_ICU1)
FAST_INTR(2,fastintr2, ENABLE_ICU1)
FAST_INTR(3,fastintr3, ENABLE_ICU1)
FAST_INTR(4,fastintr4, ENABLE_ICU1)
FAST_INTR(5,fastintr5, ENABLE_ICU1)
FAST_INTR(6,fastintr6, ENABLE_ICU1)
FAST_INTR(7,fastintr7, ENABLE_ICU1)
FAST_INTR(8,fastintr8, ENABLE_ICU1_AND_2)
FAST_INTR(9,fastintr9, ENABLE_ICU1_AND_2)
FAST_INTR(10,fastintr10, ENABLE_ICU1_AND_2)
FAST_INTR(11,fastintr11, ENABLE_ICU1_AND_2)
FAST_INTR(12,fastintr12, ENABLE_ICU1_AND_2)
FAST_INTR(13,fastintr13, ENABLE_ICU1_AND_2)
FAST_INTR(14,fastintr14, ENABLE_ICU1_AND_2)
FAST_INTR(15,fastintr15, ENABLE_ICU1_AND_2)
#define CLKINTR_PENDING movl $1,CNAME(clkintr_pending)
/* Threaded interrupts */
INTR(0,intr0, IO_ICU1, ENABLE_ICU1, CLKINTR_PENDING)
INTR(1,intr1, IO_ICU1, ENABLE_ICU1,)
INTR(2,intr2, IO_ICU1, ENABLE_ICU1,)
INTR(3,intr3, IO_ICU1, ENABLE_ICU1,)
INTR(4,intr4, IO_ICU1, ENABLE_ICU1,)
INTR(5,intr5, IO_ICU1, ENABLE_ICU1,)
INTR(6,intr6, IO_ICU1, ENABLE_ICU1,)
INTR(7,intr7, IO_ICU1, ENABLE_ICU1,)
INTR(8,intr8, IO_ICU2, ENABLE_ICU1_AND_2,)
INTR(9,intr9, IO_ICU2, ENABLE_ICU1_AND_2,)
INTR(10,intr10, IO_ICU2, ENABLE_ICU1_AND_2,)
INTR(11,intr11, IO_ICU2, ENABLE_ICU1_AND_2,)
INTR(12,intr12, IO_ICU2, ENABLE_ICU1_AND_2,)
INTR(13,intr13, IO_ICU2, ENABLE_ICU1_AND_2,)
INTR(14,intr14, IO_ICU2, ENABLE_ICU1_AND_2,)
INTR(15,intr15, IO_ICU2, ENABLE_ICU1_AND_2,)
MCOUNT_LABEL(eintr)
Reference in New Issue View Git Blame Copy Permalink