freebsd-nq/sys/amd64/isa/intr_machdep.c
Peter Wemm afa8862328 Commit MD parts of a loosely functional AMD64 port. This is based on
a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to
attempt to get a stable base to start from.  There is a lot missing still.
Worth noting:
- The kernel runs at 1GB in order to cheat with the pmap code.  pmap uses
  a variation of the PAE code in order to avoid having to worry about 4
  levels of page tables yet.
- It boots in 64 bit "long mode" with a tiny trampoline embedded in the
  i386 loader.  This simplifies locore.s greatly.
- There are still quite a few fragments of i386-specific code that have
  not been translated yet, and some that I cheated and wrote dumb C
  versions of (bcopy etc).
- It has both int 0x80 for syscalls (but using registers for argument
  passing, as is native on the amd64 ABI), and the 'syscall' instruction
  for syscalls.  int 0x80 preserves all registers, 'syscall' does not.
- I have tried to minimize looking at the NetBSD code, except in a couple
  of places (eg: to find which register they use to replace the trashed
  %rcx register in the syscall instruction).  As a result, there is not a
  lot of similarity.  I did look at NetBSD a few times while debugging to
  get some ideas about what I might have done wrong in my first attempt.
2003-05-01 01:05:25 +00:00

524 lines
13 KiB
C

/*-
* Copyright (c) 1991 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* William Jolitz.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)isa.c 7.2 (Berkeley) 5/13/91
* $FreeBSD$
*/
#include "opt_isa.h"
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/errno.h>
#include <sys/interrupt.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <sys/proc.h>
#include <sys/syslog.h>
#include <sys/systm.h>
#include <sys/unistd.h>
#include <machine/md_var.h>
#include <machine/segments.h>
#include <amd64/isa/isa.h>
#include <amd64/isa/icu.h>
#ifdef DEV_ISA
#include <isa/isavar.h>
#endif
#include <amd64/isa/intr_machdep.h>
#include <sys/interrupt.h>
/*
* Per-interrupt data.
*/
u_long *intr_countp[ICU_LEN]; /* pointers to interrupt counters */
driver_intr_t *intr_handler[ICU_LEN]; /* first level interrupt handler */
struct ithd *ithds[ICU_LEN]; /* real interrupt handler */
void *intr_unit[ICU_LEN];
static struct mtx ithds_table_lock; /* protect the ithds table */
static inthand_t *fastintr[ICU_LEN] = {
IDTVEC(fastintr0), IDTVEC(fastintr1),
IDTVEC(fastintr2), IDTVEC(fastintr3),
IDTVEC(fastintr4), IDTVEC(fastintr5),
IDTVEC(fastintr6), IDTVEC(fastintr7),
IDTVEC(fastintr8), IDTVEC(fastintr9),
IDTVEC(fastintr10), IDTVEC(fastintr11),
IDTVEC(fastintr12), IDTVEC(fastintr13),
IDTVEC(fastintr14), IDTVEC(fastintr15),
};
static inthand_t *slowintr[ICU_LEN] = {
IDTVEC(intr0), IDTVEC(intr1), IDTVEC(intr2), IDTVEC(intr3),
IDTVEC(intr4), IDTVEC(intr5), IDTVEC(intr6), IDTVEC(intr7),
IDTVEC(intr8), IDTVEC(intr9), IDTVEC(intr10), IDTVEC(intr11),
IDTVEC(intr12), IDTVEC(intr13), IDTVEC(intr14), IDTVEC(intr15),
};
static driver_intr_t isa_strayintr;
static void ithds_init(void *dummy);
static void ithread_enable(int vector);
static void ithread_disable(int vector);
static void init_i8259(void);
#define NMI_PARITY (1 << 7)
#define NMI_IOCHAN (1 << 6)
#define ENMI_WATCHDOG (1 << 7)
#define ENMI_BUSTIMER (1 << 6)
#define ENMI_IOSTATUS (1 << 5)
#ifdef DEV_ISA
/*
* Bus attachment for the ISA PIC.
*/
static struct isa_pnp_id atpic_ids[] = {
{ 0x0000d041 /* PNP0000 */, "AT interrupt controller" },
{ 0 }
};
static int
atpic_probe(device_t dev)
{
int result;
if ((result = ISA_PNP_PROBE(device_get_parent(dev), dev, atpic_ids)) <= 0)
device_quiet(dev);
return(result);
}
/*
* The generic ISA attachment code will handle allocating any other resources
* that we don't explicitly claim here.
*/
static int
atpic_attach(device_t dev)
{
return(0);
}
static device_method_t atpic_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, atpic_probe),
DEVMETHOD(device_attach, atpic_attach),
DEVMETHOD(device_detach, bus_generic_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
{ 0, 0 }
};
static driver_t atpic_driver = {
"atpic",
atpic_methods,
1, /* no softc */
};
static devclass_t atpic_devclass;
DRIVER_MODULE(atpic, isa, atpic_driver, atpic_devclass, 0, 0);
DRIVER_MODULE(atpic, acpi, atpic_driver, atpic_devclass, 0, 0);
#endif /* DEV_ISA */
/*
* Handle a NMI, possibly a machine check.
* return true to panic system, false to ignore.
*/
int
isa_nmi(cd)
int cd;
{
int retval = 0;
int isa_port = inb(0x61);
log(LOG_CRIT, "NMI ISA STATUS 0x%02x", isa_port);
if (isa_port & NMI_PARITY) {
log(LOG_CRIT, "RAM parity error, likely hardware failure.");
retval = 1;
}
if (isa_port & NMI_IOCHAN) {
log(LOG_CRIT, "I/O channel check, likely hardware failure.");
retval = 1;
}
return (retval);
}
/*
* ICU reinitialize when ICU configuration has lost.
*/
void icu_reinit()
{
int i;
register_t crit;
crit = intr_disable();
mtx_lock_spin(&icu_lock);
init_i8259();
for(i=0;i<ICU_LEN;i++)
if(intr_handler[i] != isa_strayintr)
INTREN(1<<i);
mtx_unlock_spin(&icu_lock);
intr_restore(crit);
}
/*
* Create a default interrupt table to avoid problems caused by
* spurious interrupts during configuration of kernel, then setup
* interrupt control unit.
*/
void
isa_defaultirq()
{
int i;
register_t crit;
/* icu vectors */
for (i = 0; i < ICU_LEN; i++)
icu_unset(i, (driver_intr_t *)NULL);
crit = intr_disable();
mtx_lock_spin(&icu_lock);
init_i8259();
mtx_unlock_spin(&icu_lock);
intr_restore(crit);
}
/*
*initialize 8259's
*/
static void init_i8259()
{
outb(IO_ICU1, ICW1_RESET | ICW1_IC4); /* reset; program device, four bytes */
outb(IO_ICU1+ICU_IMR_OFFSET, NRSVIDT); /* starting at this vector index */
outb(IO_ICU1+ICU_IMR_OFFSET, IRQ_SLAVE);/* slave on line 2 */
outb(IO_ICU1+ICU_IMR_OFFSET, ICW4_8086);/* 8086 mode */
outb(IO_ICU1+ICU_IMR_OFFSET, 0xff); /* leave interrupts masked */
outb(IO_ICU1, OCW3_SEL | OCW3_RIS); /* default to IRR on read */
outb(IO_ICU1, ICU_SETPRI | 0x2);/* pri order 3-7, 0-2 (com2 first) */
outb(IO_ICU2, ICW1_RESET | ICW1_IC4); /* reset; program device, four bytes */
outb(IO_ICU2+ICU_IMR_OFFSET, NRSVIDT+8); /* staring at this vector index */
outb(IO_ICU2+ICU_IMR_OFFSET, ICU_SLAVEID); /* my slave id is 2 */
outb(IO_ICU2+ICU_IMR_OFFSET, ICW4_8086); /* 8086 mode */
outb(IO_ICU2+ICU_IMR_OFFSET, 0xff); /* leave interrupts masked */
outb(IO_ICU2, OCW3_SEL | OCW3_RIS); /* default to IRR on read */
}
/*
* Caught a stray interrupt, notify
*/
static int isaglitch7;
static int isaglitch15;
static void
isa_strayintr(vcookiep)
void *vcookiep;
{
int intr = (void **)vcookiep - &intr_unit[0];
int isr;
/* Determine if it is a stray interrupt or simply a glitch */
if (intr == 7) {
outb(IO_ICU1, OCW3_SEL); /* select IS register */
isr = inb(IO_ICU1);
outb(IO_ICU1, OCW3_SEL | OCW3_RIS); /* reselect IIR */
if ((isr & 0x80) == 0) {
isaglitch7++;
return;
}
}
if (intr == 15) {
outb(IO_ICU2, OCW3_SEL); /* select IS register */
isr = inb(IO_ICU2);
outb(IO_ICU2, OCW3_SEL | OCW3_RIS); /* reselect IIR */
if ((isr & 0x80) == 0) {
isaglitch15++;
return;
}
}
if (intrcnt[1 + intr] <= 5)
log(LOG_ERR, "stray irq %d\n", intr);
if (intrcnt[1 + intr] == 5)
log(LOG_CRIT,
"too many stray irq %d's; not logging any more\n", intr);
}
#ifdef DEV_ISA
/*
* Return a bitmap of the current interrupt requests. This is 8259-specific
* and is only suitable for use at probe time.
*/
intrmask_t
isa_irq_pending()
{
u_char irr1;
u_char irr2;
irr1 = inb(IO_ICU1);
irr2 = inb(IO_ICU2);
return ((irr2 << 8) | irr1);
}
#endif
/*
* Update intrnames array with the specified name. This is used by
* vmstat(8) and the like.
*/
static void
update_intrname(int intr, const char *name)
{
char buf[32];
char *cp;
int name_index, off, strayintr;
/*
* Initialise strings for bitbucket and stray interrupt counters.
* These have statically allocated indices 0 and 1 through ICU_LEN.
*/
if (intrnames[0] == '\0') {
off = sprintf(intrnames, "???") + 1;
for (strayintr = 0; strayintr < ICU_LEN; strayintr++)
off += sprintf(intrnames + off, "stray irq%d",
strayintr) + 1;
}
if (name == NULL)
name = "???";
if (snprintf(buf, sizeof(buf), "%s irq%d", name, intr) >= sizeof(buf))
goto use_bitbucket;
/*
* Search for `buf' in `intrnames'. In the usual case when it is
* not found, append it to the end if there is enough space (the \0
* terminator for the previous string, if any, becomes a separator).
*/
for (cp = intrnames, name_index = 0;
cp != eintrnames && name_index < NR_INTRNAMES;
cp += strlen(cp) + 1, name_index++) {
if (*cp == '\0') {
if (strlen(buf) >= eintrnames - cp)
break;
strcpy(cp, buf);
goto found;
}
if (strcmp(cp, buf) == 0)
goto found;
}
use_bitbucket:
printf("update_intrname: counting %s irq%d as %s\n", name, intr,
intrnames);
name_index = 0;
found:
intr_countp[intr] = &intrcnt[name_index];
}
int
icu_setup(int intr, driver_intr_t *handler, void *arg, int flags)
{
register_t crit;
if ((u_int)intr >= ICU_LEN || intr == ICU_SLAVEID)
return (EINVAL);
#if 0
if (intr_handler[intr] != isa_strayintr)
return (EBUSY);
#endif
crit = intr_disable();
mtx_lock_spin(&icu_lock);
intr_handler[intr] = handler;
intr_unit[intr] = arg;
setidt(ICU_OFFSET + intr,
flags & INTR_FAST ? fastintr[intr] : slowintr[intr],
SDT_SYSIGT, SEL_KPL, 0);
INTREN(1 << intr);
mtx_unlock_spin(&icu_lock);
intr_restore(crit);
return (0);
}
/*
* Dissociate an interrupt handler from an IRQ and set the handler to
* the stray interrupt handler. The 'handler' parameter is used only
* for consistency checking.
*/
int
icu_unset(intr, handler)
int intr;
driver_intr_t *handler;
{
register_t crit;
if ((u_int)intr >= ICU_LEN || handler != intr_handler[intr])
return (EINVAL);
crit = intr_disable();
mtx_lock_spin(&icu_lock);
INTRDIS(1 << intr);
intr_countp[intr] = &intrcnt[1 + intr];
intr_handler[intr] = isa_strayintr;
intr_unit[intr] = &intr_unit[intr];
setidt(ICU_OFFSET + intr, slowintr[intr], SDT_SYSIGT, SEL_KPL, 0);
mtx_unlock_spin(&icu_lock);
intr_restore(crit);
return (0);
}
static void
ithds_init(void *dummy)
{
mtx_init(&ithds_table_lock, "ithread table lock", NULL, MTX_SPIN);
}
SYSINIT(ithds_init, SI_SUB_INTR, SI_ORDER_SECOND, ithds_init, NULL);
static void
ithread_enable(int vector)
{
register_t crit;
crit = intr_disable();
mtx_lock_spin(&icu_lock);
INTREN(1 << vector);
mtx_unlock_spin(&icu_lock);
intr_restore(crit);
}
static void
ithread_disable(int vector)
{
register_t crit;
crit = intr_disable();
mtx_lock_spin(&icu_lock);
INTRDIS(1 << vector);
mtx_unlock_spin(&icu_lock);
intr_restore(crit);
}
int
inthand_add(const char *name, int irq, driver_intr_t handler, void *arg,
enum intr_type flags, void **cookiep)
{
struct ithd *ithd; /* descriptor for the IRQ */
int errcode = 0;
int created_ithd = 0;
/*
* Work around a race where more than one CPU may be registering
* handlers on the same IRQ at the same time.
*/
mtx_lock_spin(&ithds_table_lock);
ithd = ithds[irq];
mtx_unlock_spin(&ithds_table_lock);
if (ithd == NULL) {
errcode = ithread_create(&ithd, irq, 0, ithread_disable,
ithread_enable, "irq%d:", irq);
if (errcode)
return (errcode);
mtx_lock_spin(&ithds_table_lock);
if (ithds[irq] == NULL) {
ithds[irq] = ithd;
created_ithd++;
mtx_unlock_spin(&ithds_table_lock);
} else {
struct ithd *orphan;
orphan = ithd;
ithd = ithds[irq];
mtx_unlock_spin(&ithds_table_lock);
ithread_destroy(orphan);
}
}
errcode = ithread_add_handler(ithd, name, handler, arg,
ithread_priority(flags), flags, cookiep);
if ((flags & INTR_FAST) == 0 || errcode)
/*
* The interrupt process must be in place, but
* not necessarily schedulable, before we
* initialize the ICU, since it may cause an
* immediate interrupt.
*/
if (icu_setup(irq, sched_ithd, arg, flags) != 0)
panic("inthand_add: Can't initialize ICU");
if (errcode)
return (errcode);
if (flags & INTR_FAST) {
errcode = icu_setup(irq, handler, arg, flags);
if (errcode && bootverbose)
printf("\tinthand_add(irq%d) failed, result=%d\n",
irq, errcode);
if (errcode)
return (errcode);
}
update_intrname(irq, name);
return (0);
}
/*
* Deactivate and remove linked list the interrupt handler descriptor
* data connected created by an earlier call of inthand_add(), then
* adjust the interrupt masks if necessary.
*
* Return the memory held by the interrupt handler descriptor data
* structure to the system. First ensure the handler is not actively
* in use.
*/
int
inthand_remove(void *cookie)
{
return (ithread_remove_handler(cookie));
}