d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
57402d4df8
freebsd-nq/sys/i386/isa/sound/sscape.c
Mark Murray b41c00fa66 Fix conflicts.
1997-11-10 18:31:35 +00:00

1059 lines
23 KiB
C
Raw Blame History

/*
* sound/sscape.c
*
* Low level driver for Ensoniq Soundscape
*
* Copyright by Hannu Savolainen 1994
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer. 2.
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include <i386/isa/sound/sound_config.h>
#if NSSCAPE > 0
#include <i386/isa/sound/coproc.h>
#define EXCLUDE_NATIVE_PCM
/*
* I/O ports
*/
#define MIDI_DATA 0
#define MIDI_CTRL 1
#define HOST_CTRL 2
#define TX_READY 0x02
#define RX_READY 0x01
#define HOST_DATA 3
#define ODIE_ADDR 4
#define ODIE_DATA 5
/*
* Indirect registers
*/
#define GA_INTSTAT_REG 0
#define GA_INTENA_REG 1
#define GA_DMAA_REG 2
#define GA_DMAB_REG 3
#define GA_INTCFG_REG 4
#define GA_DMACFG_REG 5
#define GA_CDCFG_REG 6
#define GA_SMCFGA_REG 7
#define GA_SMCFGB_REG 8
#define GA_HMCTL_REG 9
/*
* DMA channel identifiers (A and B)
*/
#define SSCAPE_DMA_A 0
#define SSCAPE_DMA_B 1
#define PORT(name) (devc->base+name)
/*
* Host commands recognized by the OBP microcode
*/
#define CMD_GEN_HOST_ACK 0x80
#define CMD_GEN_MPU_ACK 0x81
#define CMD_GET_BOARD_TYPE 0x82
#define CMD_SET_CONTROL 0x88
#define CMD_GET_CONTROL 0x89
#define CTL_MASTER_VOL 0
#define CTL_MIC_MODE 2
#define CTL_SYNTH_VOL 4
#define CTL_WAVE_VOL 7
#define CMD_SET_MT32 0x96
#define CMD_GET_MT32 0x97
#define CMD_SET_EXTMIDI 0x9b
#define CMD_GET_EXTMIDI 0x9c
#define CMD_ACK 0x80
typedef struct sscape_info {
int base, irq, dma;
int ok; /* Properly detected */
int failed;
int dma_allocated;
int my_audiodev;
int opened;
sound_os_info *osp;
}
sscape_info;
static struct sscape_info dev_info =
{0};
static struct sscape_info *devc = &dev_info;
static int *sscape_sleeper = NULL;
static volatile struct snd_wait sscape_sleep_flag =
{0};
/* Some older cards have assigned interrupt bits differently than new ones */
static char valid_interrupts_old[] =
{9, 7, 5, 15};
static char valid_interrupts_new[] =
{9, 5, 7, 10};
static char *valid_interrupts = valid_interrupts_new;
#ifdef REVEAL_SPEA
static char old_hardware = 1;
#else
static char old_hardware = 0;
#endif
static u_char
sscape_read(struct sscape_info * devc, int reg)
{
u_long flags;
u_char val;
flags = splhigh();
outb(PORT(ODIE_ADDR), reg);
val = inb(PORT(ODIE_DATA));
splx(flags);
return val;
}
static void
sscape_write(struct sscape_info * devc, int reg, int data)
{
u_long flags;
flags = splhigh();
outb(PORT(ODIE_ADDR), reg);
outb(PORT(ODIE_DATA), data);
splx(flags);
}
static void
host_open(struct sscape_info * devc)
{
outb(PORT(HOST_CTRL), 0x00); /* Put the board to the host mode */
}
static void
host_close(struct sscape_info * devc)
{
outb(PORT(HOST_CTRL), 0x03); /* Put the board to the MIDI mode */
}
static int
host_write(struct sscape_info * devc, u_char *data, int count)
{
u_long flags;
int i, timeout_val;
flags = splhigh();
/*
* Send the command and data bytes
*/
for (i = 0; i < count; i++) {
for (timeout_val = 10000; timeout_val > 0; timeout_val--)
if (inb(PORT(HOST_CTRL)) & TX_READY)
break;
if (timeout_val <= 0) {
splx(flags);
return 0;
}
outb(PORT(HOST_DATA), data[i]);
}
splx(flags);
return 1;
}
static int
host_read(struct sscape_info * devc)
{
u_long flags;
int timeout_val;
u_char data;
flags = splhigh();
/*
* Read a byte
*/
for (timeout_val = 10000; timeout_val > 0; timeout_val--)
if (inb(PORT(HOST_CTRL)) & RX_READY)
break;
if (timeout_val <= 0) {
splx(flags);
return -1;
}
data = inb(PORT(HOST_DATA));
splx(flags);
return data;
}
static int
host_command1(struct sscape_info * devc, int cmd)
{
u_char buf[10];
buf[0] = (u_char) (cmd & 0xff);
return host_write(devc, buf, 1);
}
static int
host_command2(struct sscape_info * devc, int cmd, int parm1)
{
u_char buf[10];
buf[0] = (u_char) (cmd & 0xff);
buf[1] = (u_char) (parm1 & 0xff);
return host_write(devc, buf, 2);
}
static int
host_command3(struct sscape_info * devc, int cmd, int parm1, int parm2)
{
u_char buf[10];
buf[0] = (u_char) (cmd & 0xff);
buf[1] = (u_char) (parm1 & 0xff);
buf[2] = (u_char) (parm2 & 0xff);
return host_write(devc, buf, 3);
}
static void
set_mt32(struct sscape_info * devc, int value)
{
host_open(devc);
host_command2(devc, CMD_SET_MT32,
value ? 1 : 0);
if (host_read(devc) != CMD_ACK) {
printf("SNDSCAPE: Setting MT32 mode failed\n");
}
host_close(devc);
}
static void
set_control(struct sscape_info * devc, int ctrl, int value)
{
host_open(devc);
host_command3(devc, CMD_SET_CONTROL, ctrl, value);
if (host_read(devc) != CMD_ACK) {
printf("SNDSCAPE: Setting control (%d) failed\n", ctrl);
}
host_close(devc);
}
static int
get_board_type(struct sscape_info * devc)
{
int tmp;
host_open(devc);
if (!host_command1(devc, CMD_GET_BOARD_TYPE))
tmp = -1;
else
tmp = host_read(devc);
host_close(devc);
return tmp;
}
void
sscapeintr(int irq)
{
u_char bits, tmp;
static int debug = 0;
DEB(printf("sscapeintr(0x%02x)\n", (bits = sscape_read(devc, GA_INTSTAT_REG))));
if ((sscape_sleep_flag.mode & WK_SLEEP)) {
sscape_sleep_flag.mode = WK_WAKEUP;
wakeup(sscape_sleeper);
}
if (bits & 0x02) { /* Host interface interrupt */
printf("SSCAPE: Host interrupt, data=%02x\n", host_read(devc));
}
#if (defined(CONFIG_MPU401) || defined(CONFIG_MPU_EMU)) && defined(CONFIG_MIDI)
if (bits & 0x01) {
mpuintr(irq);
if (debug++ > 10) { /* Temporary debugging hack */
sscape_write(devc, GA_INTENA_REG, 0x00); /* Disable all interr. */
}
}
#endif
/*
* Acknowledge interrupts (toggle the interrupt bits)
*/
tmp = sscape_read(devc, GA_INTENA_REG);
sscape_write(devc, GA_INTENA_REG, (~bits & 0x0e) | (tmp & 0xf1));
}
static void
do_dma(struct sscape_info * devc, int dma_chan, u_long buf, int blk_size, int mode)
{
u_char temp;
if (dma_chan != SSCAPE_DMA_A) {
printf("SSCAPE: Tried to use DMA channel != A. Why?\n");
return;
}
DMAbuf_start_dma(devc->my_audiodev, buf, blk_size, mode);
temp = devc->dma << 4; /* Setup DMA channel select bits */
if (devc->dma <= 3)
temp |= 0x80; /* 8 bit DMA channel */
temp |= 1; /* Trigger DMA */
sscape_write(devc, GA_DMAA_REG, temp);
temp &= 0xfe; /* Clear DMA trigger */
sscape_write(devc, GA_DMAA_REG, temp);
}
static int
verify_mpu(struct sscape_info * devc)
{
/*
* The SoundScape board could be in three modes (MPU, 8250 and host).
* If the card is not in the MPU mode, enabling the MPU driver will
* cause infinite loop (the driver believes that there is always some
* received data in the buffer.
*
* Detect this by looking if there are more than 10 received MIDI bytes
* (0x00) in the buffer.
*/
int i;
for (i = 0; i < 10; i++) {
if (inb(devc->base + HOST_CTRL) & 0x80)
return 1;
if (inb(devc->base) != 0x00)
return 1;
}
printf("SoundScape: The device is not in the MPU-401 mode\n");
return 0;
}
static int
sscape_coproc_open(void *dev_info, int sub_device)
{
if (sub_device == COPR_MIDI) {
set_mt32(devc, 0);
if (!verify_mpu(devc))
return -(EIO);
}
sscape_sleep_flag.aborting = 0;
sscape_sleep_flag.mode = WK_NONE;
return 0;
}
static void
sscape_coproc_close(void *dev_info, int sub_device)
{
struct sscape_info *devc = dev_info;
u_long flags;
flags = splhigh();
if (devc->dma_allocated) {
sscape_write(devc, GA_DMAA_REG, 0x20); /* DMA channel disabled */
#ifdef CONFIG_NATIVE_PCM
#endif
devc->dma_allocated = 0;
}
sscape_sleep_flag.aborting = 0;
sscape_sleep_flag.mode = WK_NONE;
splx(flags);
return;
}
static void
sscape_coproc_reset(void *dev_info)
{
}
static int
sscape_download_boot(struct sscape_info * devc, u_char *block, int size, int flag)
{
u_long flags;
u_char temp;
int done, timeout_val;
if (flag & CPF_FIRST) {
/*
* First block. Have to allocate DMA and to reset the board
* before continuing.
*/
flags = splhigh();
if (devc->dma_allocated == 0) {
devc->dma_allocated = 1;
}
splx(flags);
sscape_write(devc, GA_HMCTL_REG,
(temp = sscape_read(devc, GA_HMCTL_REG)) & 0x3f); /* Reset */
for (timeout_val = 10000; timeout_val > 0; timeout_val--)
sscape_read(devc, GA_HMCTL_REG); /* Delay */
/* Take board out of reset */
sscape_write(devc, GA_HMCTL_REG,
(temp = sscape_read(devc, GA_HMCTL_REG)) | 0x80);
}
/*
* Transfer one code block using DMA
*/
bcopy(block, audio_devs[devc->my_audiodev]->dmap_out->raw_buf, size);
flags = splhigh();
/******** INTERRUPTS DISABLED NOW ********/
do_dma(devc, SSCAPE_DMA_A,
audio_devs[devc->my_audiodev]->dmap_out->raw_buf_phys,
size, 1);
/*
* Wait until transfer completes.
*/
sscape_sleep_flag.aborting = 0;
sscape_sleep_flag.mode = WK_NONE;
done = 0;
timeout_val = 100;
while (!done && timeout_val-- > 0) {
int resid;
int chn;
sscape_sleeper = &chn;
DO_SLEEP(chn, sscape_sleep_flag, 1);
done = 1;
}
splx(flags);
if (!done)
return 0;
if (flag & CPF_LAST) {
/*
* Take the board out of reset
*/
outb(PORT(HOST_CTRL), 0x00);
outb(PORT(MIDI_CTRL), 0x00);
temp = sscape_read(devc, GA_HMCTL_REG);
temp |= 0x40;
sscape_write(devc, GA_HMCTL_REG, temp); /* Kickstart the board */
/*
* Wait until the ODB wakes up
*/
flags = splhigh();
done = 0;
timeout_val = 5 * hz;
while (!done && timeout_val-- > 0) {
int chn;
sscape_sleeper = &chn;
DO_SLEEP(chn, sscape_sleep_flag, 1);
if (inb(PORT(HOST_DATA)) == 0xff) /* OBP startup acknowledge */
done = 1;
}
splx(flags);
if (!done) {
printf("SoundScape: The OBP didn't respond after code download\n");
return 0;
}
flags = splhigh();
done = 0;
timeout_val = 5 * hz;
while (!done && timeout_val-- > 0) {
int chn;
sscape_sleeper = &chn;
DO_SLEEP(chn, sscape_sleep_flag, 1);
if (inb(PORT(HOST_DATA)) == 0xfe) /* Host startup acknowledge */
done = 1;
}
splx(flags);
if (!done) {
printf("SoundScape: OBP Initialization failed.\n");
return 0;
}
printf("SoundScape board of type %d initialized OK\n",
get_board_type(devc));
set_control(devc, CTL_MASTER_VOL, 100);
set_control(devc, CTL_SYNTH_VOL, 100);
#ifdef SSCAPE_DEBUG3
/*
* Temporary debugging aid. Print contents of the registers
* after downloading the code.
*/
{
int i;
for (i = 0; i < 13; i++)
printf("I%d = %02x (new value)\n", i, sscape_read(devc, i));
}
#endif
}
return 1;
}
static int
download_boot_block(void *dev_info, copr_buffer * buf)
{
if (buf->len <= 0 || buf->len > sizeof(buf->data))
return -(EINVAL);
if (!sscape_download_boot(devc, buf->data, buf->len, buf->flags)) {
printf("SSCAPE: Unable to load microcode block to the OBP.\n");
return -(EIO);
}
return 0;
}
static int
sscape_coproc_ioctl(void *dev_info, u_int cmd, ioctl_arg arg, int local)
{
switch (cmd) {
case SNDCTL_COPR_RESET:
sscape_coproc_reset(dev_info);
return 0;
break;
case SNDCTL_COPR_LOAD:
{
copr_buffer *buf;
int err;
buf = (copr_buffer *) malloc(sizeof(copr_buffer), M_TEMP, M_WAITOK);
if (buf == NULL)
return -(ENOSPC);
bcopy(&(((char *) arg)[0]), (char *) buf, sizeof(*buf));
err = download_boot_block(dev_info, buf);
free(buf, M_TEMP);
return err;
}
break;
default:
return -(EINVAL);
}
}
static coproc_operations sscape_coproc_operations =
{
"SoundScape M68K",
sscape_coproc_open,
sscape_coproc_close,
sscape_coproc_ioctl,
sscape_coproc_reset,
&dev_info
};
static int
sscape_audio_open(int dev, int mode)
{
u_long flags;
sscape_info *devc = (sscape_info *) audio_devs[dev]->devc;
flags = splhigh();
if (devc->opened) {
splx(flags);
return -(EBUSY);
}
devc->opened = 1;
splx(flags);
#ifdef SSCAPE_DEBUG4
/*
* Temporary debugging aid. Print contents of the registers when the
* device is opened.
*/
{
int i;
for (i = 0; i < 13; i++)
printf("I%d = %02x\n", i, sscape_read(devc, i));
}
#endif
return 0;
}
static void
sscape_audio_close(int dev)
{
u_long flags;
sscape_info *devc = (sscape_info *) audio_devs[dev]->devc;
DEB(printf("sscape_audio_close(void)\n"));
flags = splhigh();
devc->opened = 0;
splx(flags);
}
static int
set_speed(sscape_info * devc, int arg)
{
return 8000;
}
static int
set_channels(sscape_info * devc, int arg)
{
return 1;
}
static int
set_format(sscape_info * devc, int arg)
{
return AFMT_U8;
}
static int
sscape_audio_ioctl(int dev, u_int cmd, ioctl_arg arg, int local)
{
sscape_info *devc = (sscape_info *) audio_devs[dev]->devc;
switch (cmd) {
case SOUND_PCM_WRITE_RATE:
if (local)
return set_speed(devc, (int) arg);
return *(int *) arg = set_speed(devc, (*(int *) arg));
case SOUND_PCM_READ_RATE:
if (local)
return 8000;
return *(int *) arg = 8000;
case SNDCTL_DSP_STEREO:
if (local)
return set_channels(devc, (int) arg + 1) - 1;
return *(int *) arg = set_channels(devc, (*(int *) arg) + 1) - 1;
case SOUND_PCM_WRITE_CHANNELS:
if (local)
return set_channels(devc, (int) arg);
return *(int *) arg = set_channels(devc, (*(int *) arg));
case SOUND_PCM_READ_CHANNELS:
if (local)
return 1;
return *(int *) arg = 1;
case SNDCTL_DSP_SAMPLESIZE:
if (local)
return set_format(devc, (int) arg);
return *(int *) arg = set_format(devc, (*(int *) arg));
case SOUND_PCM_READ_BITS:
if (local)
return 8;
return *(int *) arg = 8;
default:;
}
return -(EINVAL);
}
static void
sscape_audio_output_block(int dev, u_long buf, int count, int intrflag, int dma_restart)
{
}
static void
sscape_audio_start_input(int dev, u_long buf, int count, int intrflag, int dma_restart)
{
}
static int
sscape_audio_prepare_for_input(int dev, int bsize, int bcount)
{
return 0;
}
static int
sscape_audio_prepare_for_output(int dev, int bsize, int bcount)
{
return 0;
}
static void
sscape_audio_halt(int dev)
{
}
static void
sscape_audio_reset(int dev)
{
sscape_audio_halt(dev);
}
static struct audio_operations sscape_audio_operations =
{
"Not functional",
0,
AFMT_U8 | AFMT_S16_LE,
NULL,
sscape_audio_open,
sscape_audio_close,
sscape_audio_output_block,
sscape_audio_start_input,
sscape_audio_ioctl,
sscape_audio_prepare_for_input,
sscape_audio_prepare_for_output,
sscape_audio_reset,
sscape_audio_halt,
NULL,
NULL
};
static int sscape_detected = 0;
void
attach_sscape(struct address_info * hw_config)
{
int my_dev;
#ifndef SSCAPE_REGS
/*
* Config register values for Spea/V7 Media FX and Ensoniq S-2000.
* These values are card dependent. If you have another SoundScape
* based card, you have to find the correct values. Do the following:
* - Compile this driver with SSCAPE_DEBUG1 defined. - Shut down and
* power off your machine. - Boot with DOS so that the SSINIT.EXE
* program is run. - Warm boot to {Linux|SYSV|BSD} and write down the
* lines displayed when detecting the SoundScape. - Modify the
* following list to use the values printed during boot. Undefine the
* SSCAPE_DEBUG1
*/
#define SSCAPE_REGS { \
/* I0 */ 0x00, \
0xf0, /* Note! Ignored. Set always to 0xf0 */ \
0x20, /* Note! Ignored. Set always to 0x20 */ \
0x20, /* Note! Ignored. Set always to 0x20 */ \
0xf5, /* Ignored */ \
0x10, \
0x00, \
0x2e, /* I7 MEM config A. Likely to vary between models */ \
0x00, /* I8 MEM config B. Likely to vary between models */ \
/* I9 */ 0x40 /* Ignored */ \
}
#endif
u_long flags;
static u_char regs[10] = SSCAPE_REGS;
int i, irq_bits = 0xff;
if (sscape_detected != hw_config->io_base)
return;
if (old_hardware) {
valid_interrupts = valid_interrupts_old;
conf_printf("Ensoniq Soundscape (old)", hw_config);
} else
conf_printf("Ensoniq Soundscape", hw_config);
for (i = 0; i < sizeof(valid_interrupts); i++)
if (hw_config->irq == valid_interrupts[i]) {
irq_bits = i;
break;
}
if (hw_config->irq > 15 || (regs[4] = irq_bits == 0xff)) {
printf("Invalid IRQ%d\n", hw_config->irq);
return;
}
flags = splhigh();
for (i = 1; i < 10; i++)
switch (i) {
case 1: /* Host interrupt enable */
sscape_write(devc, i, 0xf0); /* All interrupts enabled */
break;
case 2: /* DMA A status/trigger register */
case 3: /* DMA B status/trigger register */
sscape_write(devc, i, 0x20); /* DMA channel disabled */
break;
case 4: /* Host interrupt config reg */
sscape_write(devc, i, 0xf0 | (irq_bits << 2) | irq_bits);
break;
case 5: /* Don't destroy CD-ROM DMA config bits (0xc0) */
sscape_write(devc, i, (regs[i] & 0x3f) |
(sscape_read(devc, i) & 0xc0));
break;
case 6: /* CD-ROM config. Don't touch. */
break;
case 9: /* Master control reg. Don't modify CR-ROM
* bits. Disable SB emul */
sscape_write(devc, i, (sscape_read(devc, i) & 0xf0) | 0x00);
break;
default:
sscape_write(devc, i, regs[i]);
}
splx(flags);
#ifdef SSCAPE_DEBUG2
/*
* Temporary debugging aid. Print contents of the registers after
* changing them.
*/
{
int i;
for (i = 0; i < 13; i++)
printf("I%d = %02x (new value)\n", i, sscape_read(devc, i));
}
#endif
#if defined(CONFIG_MIDI) && defined(CONFIG_MPU_EMU)
if (probe_mpu401(hw_config))
hw_config->always_detect = 1;
{
int prev_devs;
prev_devs = num_midis;
attach_mpu401(hw_config);
if (num_midis == (prev_devs + 1)) /* The MPU driver
* installed itself */
midi_devs[prev_devs]->coproc = &sscape_coproc_operations;
}
#endif
#ifndef EXCLUDE_NATIVE_PCM
/* Not supported yet */
#ifdef CONFIG_AUDIO
if (num_audiodevs < MAX_AUDIO_DEV) {
audio_devs[my_dev = num_audiodevs++] = &sscape_audio_operations;
audio_devs[my_dev]->dmachan1 = hw_config->dma;
audio_devs[my_dev]->buffsize = DSP_BUFFSIZE;
audio_devs[my_dev]->devc = devc;
devc->my_audiodev = my_dev;
devc->opened = 0;
audio_devs[my_dev]->coproc = &sscape_coproc_operations;
if (snd_set_irq_handler(hw_config->irq, sscapeintr, devc->osp) < 0)
printf("Error: Can't allocate IRQ for SoundScape\n");
sscape_write(devc, GA_INTENA_REG, 0x80); /* Master IRQ enable */
} else
printf("SoundScape: More than enough audio devices detected\n");
#endif
#endif
devc->ok = 1;
devc->failed = 0;
return;
}
int
probe_sscape(struct address_info * hw_config)
{
u_char save;
devc->failed = 1;
devc->base = hw_config->io_base;
devc->irq = hw_config->irq;
devc->dma = hw_config->dma;
devc->osp = hw_config->osp;
if (sscape_detected != 0 && sscape_detected != hw_config->io_base)
return 0;
/*
* First check that the address register of "ODIE" is there and that
* it has exactly 4 writeable bits. First 4 bits
*/
if ((save = inb(PORT(ODIE_ADDR))) & 0xf0)
return 0;
outb(PORT(ODIE_ADDR), 0x00);
if (inb(PORT(ODIE_ADDR)) != 0x00)
return 0;
outb(PORT(ODIE_ADDR), 0xff);
if (inb(PORT(ODIE_ADDR)) != 0x0f)
return 0;
outb(PORT(ODIE_ADDR), save);
/*
* Now verify that some indirect registers return zero on some bits.
* This may break the driver with some future revisions of "ODIE"
* but...
*/
if (sscape_read(devc, 0) & 0x0c)
return 0;
if (sscape_read(devc, 1) & 0x0f)
return 0;
if (sscape_read(devc, 5) & 0x0f)
return 0;
#ifdef SSCAPE_DEBUG1
/*
* Temporary debugging aid. Print contents of the registers before
* changing them.
*/
{
int i;
for (i = 0; i < 13; i++)
printf("I%d = %02x (old value)\n", i, sscape_read(devc, i));
}
#endif
if (old_hardware) { /* Check that it's really an old Spea/Reveal card. */
u_char tmp;
int cc;
if (!((tmp = sscape_read(devc, GA_HMCTL_REG)) & 0xc0)) {
sscape_write(devc, GA_HMCTL_REG, tmp | 0x80);
for (cc = 0; cc < 200000; ++cc)
inb(devc->base + ODIE_ADDR);
} else
old_hardware = 0;
}
if (0) {
printf("sscape.c: Can't allocate DMA channel\n");
return 0;
}
sscape_detected = hw_config->io_base;
return 1;
}
int
probe_ss_mss(struct address_info * hw_config)
{
int i, irq_bits = 0xff;
if (devc->failed)
return 0;
if (devc->ok == 0) {
printf("SoundScape: Invalid initialization order.\n");
return 0;
}
for (i = 0; i < sizeof(valid_interrupts); i++)
if (hw_config->irq == valid_interrupts[i]) {
irq_bits = i;
break;
}
if (hw_config->irq > 15 || irq_bits == 0xff) {
printf("SoundScape: Invalid MSS IRQ%d\n", hw_config->irq);
return 0;
}
return ad1848_detect(hw_config->io_base, NULL, hw_config->osp);
}
void
attach_ss_mss(struct address_info * hw_config)
{
/*
* This routine configures the SoundScape card for use with the Win
* Sound System driver. The AD1848 codec interface uses the CD-ROM
* config registers of the "ODIE".
*/
int i, irq_bits = 0xff;
#ifndef CONFIG_NATIVE_PCM
int prev_devs = num_audiodevs;
#endif
/*
* Setup the DMA polarity.
*/
sscape_write(devc, GA_DMACFG_REG, 0x50);
/*
* Take the gate-arry off of the DMA channel.
*/
sscape_write(devc, GA_DMAB_REG, 0x20);
/*
* Init the AD1848 (CD-ROM) config reg.
*/
for (i = 0; i < sizeof(valid_interrupts); i++)
if (hw_config->irq == valid_interrupts[i]) {
irq_bits = i;
break;
}
sscape_write(devc, GA_CDCFG_REG, 0x89 | (hw_config->dma << 4) |
(irq_bits << 1));
if (hw_config->irq == devc->irq)
printf("SoundScape: Warning! WSS mode can't share IRQ with MIDI\n");
ad1848_init("SoundScape", hw_config->io_base,
hw_config->irq,
hw_config->dma,
hw_config->dma,
0,
devc->osp);
#ifndef CONFIG_NATIVE_PCM
/* Check if the AD1848 driver installed itself */
if (num_audiodevs == (prev_devs + 1))
audio_devs[prev_devs]->coproc = &sscape_coproc_operations;
#endif
return;
}
#endif
Reference in New Issue View Git Blame Copy Permalink