freebsd-nq/sys/i386/isa/if_el.c

/* Copyright (c) 1994, Matthew E. Kimmel.  Permission is hereby granted
 * to use, copy, modify and distribute this software provided that both
 * the copyright notice and this permission notice appear in all copies
 * of the software, derivative works or modified versions, and any
 * portions thereof.
 *
 * Questions, comments, bug reports and fixes to kimmel@cs.umass.edu.
 */
/* Except of course for the portions of code lifted from other FreeBSD
 * drivers (mainly elread, elget and el_ioctl)
 */
/* 3COM Etherlink 3C501 device driver for FreeBSD */
/* Yeah, I know these cards suck, but you can also get them for free
 * really easily...
 */
/* Bugs/possible improvements:
 *	- Does not currently support DMA
 *	- Does not currently support multicasts
 */
#include "el.h"
#if NEL > 0
#include "bpfilter.h"

#include "param.h"
#include "systm.h"
#include "errno.h"
#include "ioctl.h"
#include "mbuf.h"
#include "socket.h"
#include "syslog.h"

#include "net/if.h"
#include "net/if_dl.h"
#include "net/if_types.h"

#ifdef INET
#include "netinet/in.h"
#include "netinet/in_systm.h"
#include "netinet/in_var.h"
#include "netinet/ip.h"
#include "netinet/if_ether.h"
#endif

#ifdef NS
#include "netns/ns.h"
#include "netns/ns_if.h"
#endif

#if NBPFILTER > 0
#include "net/bpf.h"
#include "net/bpfdesc.h"
#endif

#include "i386/isa/isa.h"
#include "i386/isa/isa_device.h"
#include "i386/isa/icu.h"
#include "i386/isa/if_elreg.h"

#define ETHER_MIN_LEN	64
#define ETHER_MAX_LEN	1518

/* For debugging convenience */
#ifdef EL_DEBUG
#define dprintf(x) printf x
#else
#define dprintf(x)
#endif

/* el_softc: per line info and status */
struct el_softc {
	struct arpcom arpcom;	/* Ethernet common */
	u_short el_base;	/* Base I/O addr */
	caddr_t bpf;		/* BPF magic cookie */
	char el_pktbuf[EL_BUFSIZ]; 	/* Frame buffer */
} el_softc[NEL];

/* Prototypes */
int el_attach(struct isa_device *);
void el_init(int);
void elintr(int);
int el_ioctl(struct ifnet *,int,caddr_t);
int el_probe(struct isa_device *);
void el_start(struct ifnet *);
void el_reset(int,int);
void el_watchdog(int);

static void el_stop(int);
static int el_xmit(struct el_softc *,int);
static inline void elread(struct el_softc *,caddr_t,int);
static struct mbuf *elget(caddr_t,int,int,struct ifnet *);
static inline void el_hardreset(int);

/* isa_driver structure for autoconf */
struct isa_driver eldriver = {
	el_probe, el_attach, "el"
};

/* Probe routine.  See if the card is there and at the right place. */
int el_probe(struct isa_device *idev)
{
	struct el_softc *sc;
	u_short base; /* Just for convenience */
	u_char station_addr[ETHER_ADDR_LEN];
	int i;

	/* Grab some info for our structure */
	sc = &el_softc[idev->id_unit];
	sc->el_base = idev->id_iobase;
	base = sc->el_base;

	/* First check the base */
	if((base < 0x280) || (base > 0x3f0)) {
		printf("el%d: ioaddr must be between 0x280 and 0x3f0\n",
			idev->id_unit);
		return(0);
	}

	/* Now attempt to grab the station address from the PROM
	 * and see if it contains the 3com vendor code.
	 */
	dprintf(("Probing 3c501 at 0x%x...\n",base));

	/* Reset the board */
	dprintf(("Resetting board...\n"));
	outb(base+EL_AC,EL_AC_RESET);
	DELAY(5);
	outb(base+EL_AC,0);
	dprintf(("Reading station address...\n"));
	/* Now read the address */
	for(i=0;i<ETHER_ADDR_LEN;i++) {
		outb(base+EL_GPBL,i);
		station_addr[i] = inb(base+EL_EAW);
	}
	dprintf(("Address is %s\n",ether_sprintf(station_addr)));

	/* If the vendor code is ok, return a 1.  We'll assume that
	 * whoever configured this system is right about the IRQ.
	 */
	if((station_addr[0] != 0x02) || (station_addr[1] != 0x60)
	   || (station_addr[2] != 0x8c)) {
		dprintf(("Bad vendor code.\n"));
		return(0);
	} else {
		dprintf(("Vendor code ok.\n"));
		/* Copy the station address into the arpcom structure */
		bcopy(station_addr,sc->arpcom.ac_enaddr,ETHER_ADDR_LEN);
		return(1);
	}
}

/* Attach the interface to the kernel data structures.  By the time
 * this is called, we know that the card exists at the given I/O address.
 * We still assume that the IRQ given is correct.
 */
int el_attach(struct isa_device *idev)
{
	struct el_softc *sc;
	struct ifnet *ifp;
	struct ifaddr *ifa;
	struct sockaddr_dl *sdl;
	u_short base;
	int t;

	dprintf(("Attaching el%d...\n",idev->id_unit));

	/* Get things pointing to the right places. */
	sc = &el_softc[idev->id_unit];
	ifp = &sc->arpcom.ac_if;
	base = sc->el_base;

	/* Now reset the board */
	dprintf(("Resetting board...\n"));
	el_hardreset(idev->id_unit);

	/* Initialize ifnet structure */
	ifp->if_unit = idev->id_unit;
	ifp->if_name = "el";
	ifp->if_mtu = ETHERMTU;
	ifp->if_init = el_init;
	ifp->if_output = ether_output;
	ifp->if_start = el_start;
	ifp->if_ioctl = el_ioctl;
	ifp->if_reset = el_reset;
	ifp->if_watchdog = el_watchdog;
	ifp->if_flags = (IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS);

	/* Now we can attach the interface */
	dprintf(("Attaching interface...\n"));
	if_attach(ifp);

	/* Put the station address in the ifa address list's AF_LINK
	 * entry, if any.
	 */
	ifa = ifp->if_addrlist;
	while ((ifa != NULL) && (ifa->ifa_addr != NULL) && 
	  (ifa->ifa_addr->sa_family != AF_LINK))
		ifa = ifa->ifa_next;
	if((ifa != NULL) && (ifa->ifa_addr != NULL)) {
		sdl = (struct sockaddr_dl *)ifa->ifa_addr;
		sdl->sdl_type = IFT_ETHER;
		sdl->sdl_alen = ETHER_ADDR_LEN;
		sdl->sdl_slen = 0;
		bcopy(sc->arpcom.ac_enaddr,LLADDR(sdl),ETHER_ADDR_LEN);
	}

	/* Print out some information for the user */
	printf("el%d: 3c501 address %s\n",idev->id_unit,
	  ether_sprintf(sc->arpcom.ac_enaddr));

	/* Finally, attach to bpf filter if it is present. */
#if NBPFILTER > 0
	dprintf(("Attaching to BPF...\n"));
	bpfattach(&sc->bpf,ifp,DLT_EN10MB,sizeof(struct ether_header));
#endif

	dprintf(("el_attach() finished.\n"));
	return(1);
}

/* This routine resets the interface. */
void el_reset(int unit,int uban)
{
	int s;

	dprintf(("elreset()\n"));
	s = splimp();
	el_stop(unit);
	el_init(unit);
	splx(s);
}

static void el_stop(int unit)
{
	struct el_softc *sc;

	sc = &el_softc[unit];
	outb(sc->el_base+EL_AC,0);
}

/* Do a hardware reset of the 3c501.  Do not call until after el_probe()! */
static inline void el_hardreset(int unit)
{
	register struct el_softc *sc;
	register int base;
	register int j;

	sc = &el_softc[unit];
	base = sc->el_base;

	/* First reset the board */
	outb(base+EL_AC,EL_AC_RESET);
	DELAY(5);
	outb(base+EL_AC,0);

	/* Then give it back its ethernet address.  Thanks to the mach
	 * source code for this undocumented goodie...
	 */
	for(j=0;j<ETHER_ADDR_LEN;j++)
		outb(base+j,sc->arpcom.ac_enaddr[j]);
}

/* Initialize interface.  */
void el_init(int unit)
{
	struct el_softc *sc;
	struct ifnet *ifp;
	int s;
	u_short base;

	/* Set up pointers */
	sc = &el_softc[unit];
	ifp = &sc->arpcom.ac_if;
	base = sc->el_base;

	/* If address not known, do nothing. */
	if(ifp->if_addrlist == (struct ifaddr *)0)
		return;

	s = splimp();

	/* First, reset the board. */
	dprintf(("Resetting board...\n"));
	el_hardreset(unit);

	/* Configure rx */
	dprintf(("Configuring rx...\n"));
	if(ifp->if_flags & IFF_PROMISC)
		outb(base+EL_RXC,(EL_RXC_PROMISC|EL_RXC_AGF|EL_RXC_DSHORT|EL_RXC_DDRIB|EL_RXC_DOFLOW));
	else
		outb(base+EL_RXC,(EL_RXC_ABROAD|EL_RXC_AGF|EL_RXC_DSHORT|EL_RXC_DDRIB|EL_RXC_DOFLOW));
	outb(base+EL_RBC,0);

	/* Configure TX */
	dprintf(("Configuring tx...\n"));
	outb(base+EL_TXC,0);

	/* Start reception */
	dprintf(("Starting reception...\n"));
	outb(base+EL_AC,(EL_AC_IRQE|EL_AC_RX));

	/* Set flags appropriately */
	ifp->if_flags |= IFF_RUNNING;
	ifp->if_flags &= ~IFF_OACTIVE;

	/* And start output. */
	el_start(ifp);

	splx(s);
}

/* Start output on interface.  Get datagrams from the queue and output
 * them, giving the receiver a chance between datagrams.  Call only
 * from splimp or interrupt level!
 */
void el_start(struct ifnet *ifp)
{
	struct el_softc *sc;
	u_short base;
	struct mbuf *m, *m0;
	int s, i, len, retries, done;

	/* Get things pointing in the right directions */
	sc = &el_softc[ifp->if_unit];
	base = sc->el_base;

	dprintf(("el_start()...\n"));
	s = splimp();

	/* Don't do anything if output is active */
	if(sc->arpcom.ac_if.if_flags & IFF_OACTIVE)
		return;
	sc->arpcom.ac_if.if_flags |= IFF_OACTIVE;

	/* The main loop.  They warned me against endless loops, but
	 * would I listen?  NOOO....
	 */
	while(1) {
		/* Dequeue the next datagram */
		IF_DEQUEUE(&sc->arpcom.ac_if.if_snd,m0);

		/* If there's nothing to send, return. */
		if(m0 == NULL) {
			sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE;
			splx(s);
			return;
		}

		/* Disable the receiver */
		outb(base+EL_AC,EL_AC_HOST);
		outb(base+EL_RBC,0);

		/* Copy the datagram to the buffer. */
		len = 0;
		for(m = m0; m != NULL; m = m->m_next) {
			if(m->m_len == 0)
				continue;
			bcopy(mtod(m,caddr_t),sc->el_pktbuf+len,m->m_len);
			len += m->m_len;
		}
		m_freem(m0);

		len = MAX(len,ETHER_MIN_LEN);

		/* Give the packet to the bpf, if any */
#if NBPFILTER > 0
		if(sc->bpf)
			bpf_tap(sc->bpf,sc->el_pktbuf,len);
#endif

		/* Transfer datagram to board */
		dprintf(("el: xfr pkt length=%d...\n",len));
		i = EL_BUFSIZ - len;
		outb(base+EL_GPBL,(i & 0xff));
		outb(base+EL_GPBH,((i>>8)&0xff));
		outsb(base+EL_BUF,sc->el_pktbuf,len);

		/* Now transmit the datagram */
		retries=0;
		done=0;
		while(!done) {
			if(el_xmit(sc,len)) { /* Something went wrong */
				done = -1;
				break;
			}
			/* Check out status */
			i = inb(base+EL_TXS);
			dprintf(("tx status=0x%x\n",i));
			if(!(i & EL_TXS_READY)) {
				dprintf(("el: err txs=%x\n",i));
				sc->arpcom.ac_if.if_oerrors++;
				if(i & (EL_TXS_COLL|EL_TXS_COLL16)) {
					if((!(i & EL_TXC_DCOLL16)) && retries < 15) {
						retries++;
						outb(base+EL_AC,EL_AC_HOST);
					}
				}
				else
					done = 1;
			} 
			else {
				sc->arpcom.ac_if.if_opackets++;
				done = 1;
			}
		}
		if(done == -1)  /* Packet not transmitted */
			continue;

		/* Now give the card a chance to receive.
		 * Gotta love 3c501s...
		 */
		(void)inb(base+EL_AS);
		outb(base+EL_AC,(EL_AC_IRQE|EL_AC_RX));
		splx(s);
		/* Interrupt here */
		s = splimp();
	}
}

/* This function actually attempts to transmit a datagram downloaded
 * to the board.  Call at splimp or interrupt, after downloading data!
 * Returns 0 on success, non-0 on failure
 */
static int el_xmit(struct el_softc *sc,int len)
{
	int gpl;
	int i;

	gpl = EL_BUFSIZ - len;
	dprintf(("el: xmit..."));
	outb((sc->el_base)+EL_GPBL,(gpl & 0xff));
	outb((sc->el_base)+EL_GPBH,((gpl>>8)&0xff));
	outb((sc->el_base)+EL_AC,EL_AC_TXFRX);
	i = 20000;
	while((inb((sc->el_base)+EL_AS) & EL_AS_TXBUSY) && (i>0))
		i--;
	if(i == 0) {
		dprintf(("tx not ready\n"));
		sc->arpcom.ac_if.if_oerrors++;
		return(-1);
	}
	dprintf(("%d cycles.\n",(20000-i)));
	return(0);
}

/* controller interrupt */
void elintr(int unit)
{
	register struct el_softc *sc;
	register base;
	int stat, rxstat, len, done;

	/* Get things pointing properly */
	sc = &el_softc[unit];
	base = sc->el_base;

	dprintf(("elintr: "));

	/* Check board status */
	stat = inb(base+EL_AS);
	if(stat & EL_AS_RXBUSY) {
		(void)inb(base+EL_RXC);
		outb(base+EL_AC,(EL_AC_IRQE|EL_AC_RX));
		return;
	}

	done = 0;
	while(!done) {
		rxstat = inb(base+EL_RXS);
		if(rxstat & EL_RXS_STALE) {
			(void)inb(base+EL_RXC);
			outb(base+EL_AC,(EL_AC_IRQE|EL_AC_RX));
			return;
		}

		/* If there's an overflow, reinit the board. */
		if(!(rxstat & EL_RXS_NOFLOW)) {
			dprintf(("overflow.\n"));
			el_hardreset(unit);
			/* Put board back into receive mode */
			if(sc->arpcom.ac_if.if_flags & IFF_PROMISC)
				outb(base+EL_RXC,(EL_RXC_PROMISC|EL_RXC_AGF|EL_RXC_DSHORT|EL_RXC_DDRIB|EL_RXC_DOFLOW));
			else
				outb(base+EL_RXC,(EL_RXC_ABROAD|EL_RXC_AGF|EL_RXC_DSHORT|EL_RXC_DDRIB|EL_RXC_DOFLOW));
			(void)inb(base+EL_AS);
			outb(base+EL_RBC,0);
			(void)inb(base+EL_RXC);
			outb(base+EL_AC,(EL_AC_IRQE|EL_AC_RX));
			return;
		}

		/* Incoming packet */
		len = inb(base+EL_RBL);
		len |= inb(base+EL_RBH) << 8;
		dprintf(("receive len=%d rxstat=%x ",len,rxstat));
		outb(base+EL_AC,EL_AC_HOST);

		/* If packet too short or too long, restore rx mode and return
		 */
		if((len <= sizeof(struct ether_header)) || (len > ETHER_MAX_LEN)) {
			if(sc->arpcom.ac_if.if_flags & IFF_PROMISC)
				outb(base+EL_RXC,(EL_RXC_PROMISC|EL_RXC_AGF|EL_RXC_DSHORT|EL_RXC_DDRIB|EL_RXC_DOFLOW));
			else
				outb(base+EL_RXC,(EL_RXC_ABROAD|EL_RXC_AGF|EL_RXC_DSHORT|EL_RXC_DDRIB|EL_RXC_DOFLOW));
			(void)inb(base+EL_AS);
			outb(base+EL_RBC,0);
			(void)inb(base+EL_RXC);
			outb(base+EL_AC,(EL_AC_IRQE|EL_AC_RX));
			return;
		}

		sc->arpcom.ac_if.if_ipackets++;

		/* Copy the data into our buffer */
		outb(base+EL_GPBL,0);
		outb(base+EL_GPBH,0);
		insb(base+EL_BUF,sc->el_pktbuf,len);
		outb(base+EL_RBC,0);
		outb(base+EL_AC,EL_AC_RX);
		dprintf(("%s-->",ether_sprintf(sc->el_pktbuf+6)));
		dprintf(("%s\n",ether_sprintf(sc->el_pktbuf)));

		/* Pass data up to upper levels */
		len -= sizeof(struct ether_header);
		elread(sc,(caddr_t)(sc->el_pktbuf),len);

		/* Is there another packet? */
		stat = inb(base+EL_AS);

		/* If so, do it all again (i.e. don't set done to 1) */
		if(!(stat & EL_AS_RXBUSY)) 
			dprintf(("<rescan> "));
		else
			done = 1;
	}

	(void)inb(base+EL_RXC);
	outb(base+EL_AC,(EL_AC_IRQE|EL_AC_RX));
	return;
}

/* Pass a packet up to the higher levels.  Deal with trailer protocol. */
static inline void elread(struct el_softc *sc,caddr_t buf,int len)
{
	register struct ether_header *eh;
	struct mbuf *m;
	int off, resid;

	/* Deal with trailer protocol: if type is trailer type
	 * get true type from first 16-bit word past data.
	 * Remember that type was trailer by setting off.
	 */
	eh = (struct ether_header *)buf;
	eh->ether_type = ntohs((u_short)eh->ether_type);
#define eldataaddr(eh,off,type)	((type)(((caddr_t)((eh)+1)+(off))))
	if(eh->ether_type >= ETHERTYPE_TRAIL &&
	   eh->ether_type < ETHERTYPE_TRAIL+ETHERTYPE_NTRAILER) {
		off = (eh->ether_type - ETHERTYPE_TRAIL) * 512;
		if(off >= ETHERMTU)
			return;
		eh->ether_type = ntohs(*eldataaddr(eh,off,u_short *));
		resid = ntohs(*(eldataaddr(eh,off+2,u_short *)));
		if((off+resid) > len)
			return;
		len = off + resid;
	}
	else
		off = 0;

	if(len <= 0)
		return;

#if NBPFILTER > 0
	/*
	 * Check if there's a bpf filter listening on this interface.
	 * If so, hand off the raw packet to bpf, which must deal with
	 * trailers in its own way.
	 */
	if(sc->bpf) {
		eh->ether_type = htons((u_short)eh->ether_type);
		bpf_tap(sc->bpf,buf,len+sizeof(struct ether_header));
		eh->ether_type = ntohs((u_short)eh->ether_type);

		/*
		 * Note that the interface cannot be in promiscuous mode if
		 * there are no bpf listeners.  And if el are in promiscuous
		 * mode, el have to check if this packet is really ours.
		 *
		 * This test does not support multicasts.
		 */
		if((sc->arpcom.ac_if.if_flags & IFF_PROMISC)
		   && bcmp(eh->ether_dhost,sc->arpcom.ac_enaddr,
			   sizeof(eh->ether_dhost)) != 0
		   && bcmp(eh->ether_dhost,etherbroadcastaddr,
			   sizeof(eh->ether_dhost)) != 0)
			return;
	}
#endif

	/*
	 * Pull packet off interface.  Off is nonzero if packet
	 * has trailing header; neget will then force this header
	 * information to be at the front, but we still have to drop
	 * the type and length which are at the front of any trailer data.
	 */
	m = elget(buf,len,off,&sc->arpcom.ac_if);
	if(m == 0)
		return;

	ether_input(&sc->arpcom.ac_if,eh,m);
}

/*
 * Pull read data off a interface.
 * Len is length of data, with local net header stripped.
 * Off is non-zero if a trailer protocol was used, and
 * gives the offset of the trailer information.
 * We copy the trailer information and then all the normal
 * data into mbufs.  When full cluster sized units are present
 * we copy into clusters.
 */
struct mbuf *
elget(buf, totlen, off0, ifp)
        caddr_t buf;
        int totlen, off0;
        struct ifnet *ifp;
{
        struct mbuf *top, **mp, *m, *p;
        int off = off0, len;
        register caddr_t cp = buf;
        char *epkt;

        buf += sizeof(struct ether_header);
        cp = buf;
        epkt = cp + totlen;


        if (off) {
                cp += off + 2 * sizeof(u_short);
                totlen -= 2 * sizeof(u_short);
        }

        MGETHDR(m, M_DONTWAIT, MT_DATA);
        if (m == 0)
                return (0);
        m->m_pkthdr.rcvif = ifp;
        m->m_pkthdr.len = totlen;
        m->m_len = MHLEN;
        top = 0;
        mp = &top;
        while (totlen > 0) {
                if (top) {
                        MGET(m, M_DONTWAIT, MT_DATA);
                        if (m == 0) {
                                m_freem(top);
                                return (0);
                        }
                        m->m_len = MLEN;
                }
                len = min(totlen, epkt - cp);
                if (len >= MINCLSIZE) {
                        MCLGET(m, M_DONTWAIT);
                        if (m->m_flags & M_EXT)
                                m->m_len = len = min(len, MCLBYTES);
                        else
                                len = m->m_len;
                } else {
                        /*
                         * Place initial small packet/header at end of mbuf.
                         */
                        if (len < m->m_len) {
                                if (top == 0 && len + max_linkhdr <= m->m_len)
                                        m->m_data += max_linkhdr;
                                m->m_len = len;
                        } else
                                len = m->m_len;
                }
                bcopy(cp, mtod(m, caddr_t), (unsigned)len);
                cp += len;
                *mp = m;
                mp = &m->m_next;
                totlen -= len;
                if (cp == epkt)
                        cp = buf;
        }
        return (top);
}

/*
 * Process an ioctl request. This code needs some work - it looks
 *	pretty ugly.
 */
int
el_ioctl(ifp, command, data)
	register struct ifnet *ifp;
	int command;
	caddr_t data;
{
	register struct ifaddr *ifa = (struct ifaddr *)data;
	struct el_softc *sc = &el_softc[ifp->if_unit];
	struct ifreq *ifr = (struct ifreq *)data;
	int s, error = 0;

	s = splimp();

	switch (command) {

	case SIOCSIFADDR:
		ifp->if_flags |= IFF_UP;

		switch (ifa->ifa_addr->sa_family) {
#ifdef INET
		case AF_INET:
			el_init(ifp->if_unit);	/* before arpwhohas */
			/*
			 * See if another station has *our* IP address.
			 * i.e.: There is an address conflict! If a
			 * conflict exists, a message is sent to the
			 * console.
			 */
			((struct arpcom *)ifp)->ac_ipaddr = IA_SIN(ifa)->sin_addr;
			arpwhohas((struct arpcom *)ifp, &IA_SIN(ifa)->sin_addr);
			break;
#endif
#ifdef NS
		/*
		 * XXX - This code is probably wrong
		 */
		case AF_NS:
		    {
			register struct ns_addr *ina = &(IA_SNS(ifa)->sns_addr);

			if (ns_nullhost(*ina))
				ina->x_host =
					*(union ns_host *)(sc->arpcom.ac_enaddr);
			else {
				/* 
				 * 
				 */
				bcopy((caddr_t)ina->x_host.c_host,
				      (caddr_t)sc->arpcom.ac_enaddr,
				      sizeof(sc->arpcom.ac_enaddr));
			}
			/*
			 * Set new address
			 */
			el_init(ifp->if_unit);
			break;
		    }
#endif
		default:
			el_init(ifp->if_unit);
			break;
		}
		break;

	case SIOCGIFADDR:
		{
			struct sockaddr *sa;
			sa = (struct sockaddr *)&ifr->ifr_data;
			bcopy((caddr_t)sc->arpcom.ac_enaddr,
			    (caddr_t) sa->sa_data, ETHER_ADDR_LEN);
		}
		break;

	case SIOCSIFFLAGS:
		/*
		 * If interface is marked down and it is running, then stop it
		 */
		if (((ifp->if_flags & IFF_UP) == 0) &&
		    (ifp->if_flags & IFF_RUNNING)) {
			el_stop(ifp->if_unit);
			ifp->if_flags &= ~IFF_RUNNING;
		} else {
		/*
		 * If interface is marked up and it is stopped, then start it
		 */
			if ((ifp->if_flags & IFF_UP) &&
		    	    ((ifp->if_flags & IFF_RUNNING) == 0))
				el_init(ifp->if_unit);
		}

	default:
		error = EINVAL;
	}
	(void) splx(s);
	return (error);
}

/* Device timeout routine */
void el_watchdog(int unit)
{
	struct el_softc *sc;

	sc = &el_softc[unit];

	log(LOG_ERR,"el%d: device timeout\n",unit);
	sc->arpcom.ac_if.if_oerrors++;
	el_reset(unit,0);
}
#endif