d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5a44704319
freebsd-nq/sys/pci/ncr.c
Peter Wemm 579f45fa60 Simplify the COMPAT_PCI_DRIVER/DATA_SET hack. We can add: 
#define COMPAT_PCI_DRIVER(name,data) DATA_SET(pcidevice_set,data)
.. to 2.2.x and 3.x if people think it's worth it.  Driver writers can do
this if it's not defined.  (The reason for this is that I'm trying to
progressively eliminate use of linker_sets where it hurts modularity and
runtime load capability, and these DATA_SET's keep getting in the way.)
1999-05-09 17:07:30 +00:00

7230 lines
161 KiB
C
Raw Blame History

/**************************************************************************
**
** $Id: ncr.c,v 1.144 1999/05/06 20:16:37 ken Exp $
**
** Device driver for the NCR 53C8XX PCI-SCSI-Controller Family.
**
**-------------------------------------------------------------------------
**
** Written for 386bsd and FreeBSD by
** Wolfgang Stanglmeier <wolf@cologne.de>
** Stefan Esser <se@mi.Uni-Koeln.de>
**
**-------------------------------------------------------------------------
**
** Copyright (c) 1994 Wolfgang Stanglmeier. All rights reserved.
**
** Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions
** are met:
** 1. Redistributions of source code must retain the above copyright
** notice, this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright
** notice, this list of conditions and the following disclaimer in the
** documentation and/or other materials provided with the distribution.
** 3. The name of the author may not be used to endorse or promote products
** derived from this software without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
***************************************************************************
*/
#define NCR_DATE "pl30 98/1/1"
#define NCR_VERSION (2)
#define MAX_UNITS (16)
#define NCR_GETCC_WITHMSG
#if defined (__FreeBSD__) && defined(KERNEL)
#include "opt_failsafe.h"
#include "opt_ncr.h"
#endif /* defined(KERNEL) */
/*==========================================================
**
** Configuration and Debugging
**
** May be overwritten in <arch/conf/xxxx>
**
**==========================================================
*/
/*
** SCSI address of this device.
** The boot routines should have set it.
** If not, use this.
*/
#ifndef SCSI_NCR_MYADDR
#define SCSI_NCR_MYADDR (7)
#endif /* SCSI_NCR_MYADDR */
/*
** The default synchronous period factor
** (0=asynchronous)
** If maximum synchronous frequency is defined, use it instead.
*/
#ifndef SCSI_NCR_MAX_SYNC
#ifndef SCSI_NCR_DFLT_SYNC
#define SCSI_NCR_DFLT_SYNC (12)
#endif /* SCSI_NCR_DFLT_SYNC */
#else
#if SCSI_NCR_MAX_SYNC == 0
#define SCSI_NCR_DFLT_SYNC 0
#else
#define SCSI_NCR_DFLT_SYNC (250000 / SCSI_NCR_MAX_SYNC)
#endif
#endif
/*
** The minimal asynchronous pre-scaler period (ns)
** Shall be 40.
*/
#ifndef SCSI_NCR_MIN_ASYNC
#define SCSI_NCR_MIN_ASYNC (40)
#endif /* SCSI_NCR_MIN_ASYNC */
/*
** The maximal bus with (in log2 byte)
** (0=8 bit, 1=16 bit)
*/
#ifndef SCSI_NCR_MAX_WIDE
#define SCSI_NCR_MAX_WIDE (1)
#endif /* SCSI_NCR_MAX_WIDE */
/*==========================================================
**
** Configuration and Debugging
**
**==========================================================
*/
/*
** Number of targets supported by the driver.
** n permits target numbers 0..n-1.
** Default is 7, meaning targets #0..#6.
** #7 .. is myself.
*/
#define MAX_TARGET (16)
/*
** Number of logic units supported by the driver.
** n enables logic unit numbers 0..n-1.
** The common SCSI devices require only
** one lun, so take 1 as the default.
*/
#ifndef MAX_LUN
#define MAX_LUN (8)
#endif /* MAX_LUN */
/*
** The maximum number of jobs scheduled for starting.
** There should be one slot per target, and one slot
** for each tag of each target in use.
*/
#define MAX_START (256)
/*
** The maximum number of segments a transfer is split into.
*/
#define MAX_SCATTER (33)
/*
** The maximum transfer length (should be >= 64k).
** MUST NOT be greater than (MAX_SCATTER-1) * PAGE_SIZE.
*/
#define MAX_SIZE ((MAX_SCATTER-1) * (long) PAGE_SIZE)
/*
** other
*/
#define NCR_SNOOP_TIMEOUT (1000000)
/*==========================================================
**
** Include files
**
**==========================================================
*/
#include <stddef.h>
#include <sys/param.h>
#include <sys/time.h>
#ifdef KERNEL
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/buf.h>
#include <sys/kernel.h>
#include <sys/sysctl.h>
#include <machine/clock.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <vm/vm_extern.h>
#endif /* KERNEL */
#include <pci/pcivar.h>
#include <pci/pcireg.h>
#include <pci/ncrreg.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt_sim.h>
#include <cam/cam_debug.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
/*==========================================================
**
** Debugging tags
**
**==========================================================
*/
#define DEBUG_ALLOC (0x0001)
#define DEBUG_PHASE (0x0002)
#define DEBUG_POLL (0x0004)
#define DEBUG_QUEUE (0x0008)
#define DEBUG_RESULT (0x0010)
#define DEBUG_SCATTER (0x0020)
#define DEBUG_SCRIPT (0x0040)
#define DEBUG_TINY (0x0080)
#define DEBUG_TIMING (0x0100)
#define DEBUG_NEGO (0x0200)
#define DEBUG_TAGS (0x0400)
#define DEBUG_FREEZE (0x0800)
#define DEBUG_RESTART (0x1000)
/*
** Enable/Disable debug messages.
** Can be changed at runtime too.
*/
#ifdef SCSI_NCR_DEBUG
#define DEBUG_FLAGS ncr_debug
#else /* SCSI_NCR_DEBUG */
#define SCSI_NCR_DEBUG 0
#define DEBUG_FLAGS 0
#endif /* SCSI_NCR_DEBUG */
/*==========================================================
**
** assert ()
**
**==========================================================
**
** modified copy from 386bsd:/usr/include/sys/assert.h
**
**----------------------------------------------------------
*/
#ifdef DIAGNOSTIC
#define assert(expression) { \
if (!(expression)) { \
(void)printf("assertion \"%s\" failed: " \
"file \"%s\", line %d\n", \
#expression, __FILE__, __LINE__); \
Debugger(""); \
} \
}
#else
#define assert(expression) { \
if (!(expression)) { \
(void)printf("assertion \"%s\" failed: " \
"file \"%s\", line %d\n", \
#expression, __FILE__, __LINE__); \
} \
}
#endif
/*==========================================================
**
** Access to the controller chip.
**
**==========================================================
*/
#ifdef __alpha__
/* XXX */
#undef vtophys
#define vtophys(va) (pmap_kextract(((vm_offset_t) (va))) \
+ 1*1024*1024*1024)
#endif
#ifdef NCR_IOMAPPED
#define INB(r) inb (np->port + offsetof(struct ncr_reg, r))
#define INW(r) inw (np->port + offsetof(struct ncr_reg, r))
#define INL(r) inl (np->port + offsetof(struct ncr_reg, r))
#define OUTB(r, val) outb (np->port+offsetof(struct ncr_reg,r),(val))
#define OUTW(r, val) outw (np->port+offsetof(struct ncr_reg,r),(val))
#define OUTL(r, val) outl (np->port+offsetof(struct ncr_reg,r),(val))
#define OUTL_OFF(o, val) outl(np->port + (o), (val))
#define INB_OFF(o) inb (np->port + (o))
#define INW_OFF(o) inw (np->port + (o))
#define INL_OFF(o) inl (np->port + (o))
#define READSCRIPT_OFF(base, off) \
(*((u_int32_t *)((char *)base + (off))))
#define WRITESCRIPT_OFF(base, off, val) \
do { \
*((u_int32_t *)((char *)base + (off))) = (val); \
} while (0)
#define READSCRIPT(r) \
READSCRIPT_OFF(np->script, offsetof(struct script, r))
#define WRITESCRIPT(r, val) \
WRITESCRIPT_OFF(np->script, offsetof(struct script, r), val)
#else
#ifdef __alpha__
#define INB(r) readb (np->vaddr + offsetof(struct ncr_reg, r))
#define INW(r) readw (np->vaddr + offsetof(struct ncr_reg, r))
#define INL(r) readl (np->vaddr + offsetof(struct ncr_reg, r))
#define OUTB(r, val) writeb (np->vaddr+offsetof(struct ncr_reg,r),(val))
#define OUTW(r, val) writew (np->vaddr+offsetof(struct ncr_reg,r),(val))
#define OUTL(r, val) writel (np->vaddr+offsetof(struct ncr_reg,r),(val))
#define OUTL_OFF(o, val) writel (np->vaddr + (o), (val))
#define INB_OFF(o) readb (np->vaddr + (o))
#define INW_OFF(o) readw (np->vaddr + (o))
#define INL_OFF(o) readl (np->vaddr + (o))
#define READSCRIPT_OFF(base, off) \
(base ? *((u_int32_t *)((char *)base + (off))) : \
readl(np->vaddr2 + off))
#define WRITESCRIPT_OFF(base, off, val) \
do { \
if (base) \
*((u_int32_t *)((char *)base + (off))) = (val); \
else \
writel(np->vaddr2 + off, val); \
} while (0)
#define READSCRIPT(r) \
READSCRIPT_OFF(np->script, offsetof(struct script, r))
#define WRITESCRIPT(r, val) \
WRITESCRIPT_OFF(np->script, offsetof(struct script, r), val)
#else
#define INB(r) (np->reg->r)
#define INW(r) (np->reg->r)
#define INL(r) (np->reg->r)
#define OUTB(r, val) np->reg->r = (val)
#define OUTW(r, val) np->reg->r = (val)
#define OUTL(r, val) np->reg->r = (val)
#define OUTL_OFF(o, val) *(u_int32_t *) (((u_char *) np->reg) + (o)) = (val)
#define INB_OFF(o) *( ((u_char *) np->reg) + (o) )
#define INW_OFF(o) *((u_short *) ( ((u_char *) np->reg) + (o)) )
#define INL_OFF(o) *((u_int32_t *) ( ((u_char *) np->reg) + (o)) )
#define READSCRIPT_OFF(base, off) (*((volatile u_int32_t *)((char *)base + (off))))
#define WRITESCRIPT_OFF(base, off, val) (*((volatile u_int32_t *)((char *)base + (off))) = (val))
#define READSCRIPT(r) (np->script->r)
#define WRITESCRIPT(r, val) np->script->r = (val)
#endif
#endif
/*
** Set bit field ON, OFF
*/
#define OUTONB(r, m) OUTB(r, INB(r) | (m))
#define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m))
#define OUTONW(r, m) OUTW(r, INW(r) | (m))
#define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m))
#define OUTONL(r, m) OUTL(r, INL(r) | (m))
#define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m))
/*==========================================================
**
** Command control block states.
**
**==========================================================
*/
#define HS_IDLE (0)
#define HS_BUSY (1)
#define HS_NEGOTIATE (2) /* sync/wide data transfer*/
#define HS_DISCONNECT (3) /* Disconnected by target */
#define HS_COMPLETE (4)
#define HS_SEL_TIMEOUT (5) /* Selection timeout */
#define HS_RESET (6) /* SCSI reset */
#define HS_ABORTED (7) /* Transfer aborted */
#define HS_TIMEOUT (8) /* Software timeout */
#define HS_FAIL (9) /* SCSI or PCI bus errors */
#define HS_UNEXPECTED (10) /* Unexpected disconnect */
#define HS_STALL (11) /* QUEUE FULL or BUSY */
#define HS_DONEMASK (0xfc)
/*==========================================================
**
** Software Interrupt Codes
**
**==========================================================
*/
#define SIR_SENSE_RESTART (1)
#define SIR_SENSE_FAILED (2)
#define SIR_STALL_RESTART (3)
#define SIR_STALL_QUEUE (4)
#define SIR_NEGO_SYNC (5)
#define SIR_NEGO_WIDE (6)
#define SIR_NEGO_FAILED (7)
#define SIR_NEGO_PROTO (8)
#define SIR_REJECT_RECEIVED (9)
#define SIR_REJECT_SENT (10)
#define SIR_IGN_RESIDUE (11)
#define SIR_MISSING_SAVE (12)
#define SIR_MAX (12)
/*==========================================================
**
** Extended error codes.
** xerr_status field of struct nccb.
**
**==========================================================
*/
#define XE_OK (0)
#define XE_EXTRA_DATA (1) /* unexpected data phase */
#define XE_BAD_PHASE (2) /* illegal phase (4/5) */
/*==========================================================
**
** Negotiation status.
** nego_status field of struct nccb.
**
**==========================================================
*/
#define NS_SYNC (1)
#define NS_WIDE (2)
/*==========================================================
**
** XXX These are no longer used. Remove once the
** script is updated.
** "Special features" of targets.
** quirks field of struct tcb.
** actualquirks field of struct nccb.
**
**==========================================================
*/
#define QUIRK_AUTOSAVE (0x01)
#define QUIRK_NOMSG (0x02)
#define QUIRK_NOSYNC (0x10)
#define QUIRK_NOWIDE16 (0x20)
#define QUIRK_NOTAGS (0x40)
#define QUIRK_UPDATE (0x80)
/*==========================================================
**
** Misc.
**
**==========================================================
*/
#define CCB_MAGIC (0xf2691ad2)
#define MAX_TAGS (32) /* hard limit */
/*==========================================================
**
** OS dependencies.
**
**==========================================================
*/
#define PRINT_ADDR(ccb) xpt_print_path((ccb)->ccb_h.path)
/*==========================================================
**
** Declaration of structs.
**
**==========================================================
*/
struct tcb;
struct lcb;
struct nccb;
struct ncb;
struct script;
typedef struct ncb * ncb_p;
typedef struct tcb * tcb_p;
typedef struct lcb * lcb_p;
typedef struct nccb * nccb_p;
struct link {
ncrcmd l_cmd;
ncrcmd l_paddr;
};
struct usrcmd {
u_long target;
u_long lun;
u_long data;
u_long cmd;
};
#define UC_SETSYNC 10
#define UC_SETTAGS 11
#define UC_SETDEBUG 12
#define UC_SETORDER 13
#define UC_SETWIDE 14
#define UC_SETFLAG 15
#define UF_TRACE (0x01)
/*---------------------------------------
**
** Timestamps for profiling
**
**---------------------------------------
*/
/* Type of the kernel variable `ticks'. XXX should be declared with the var. */
typedef int ticks_t;
struct tstamp {
ticks_t start;
ticks_t end;
ticks_t select;
ticks_t command;
ticks_t data;
ticks_t status;
ticks_t disconnect;
};
/*
** profiling data (per device)
*/
struct profile {
u_long num_trans;
u_long num_bytes;
u_long num_disc;
u_long num_break;
u_long num_int;
u_long num_fly;
u_long ms_setup;
u_long ms_data;
u_long ms_disc;
u_long ms_post;
};
/*==========================================================
**
** Declaration of structs: target control block
**
**==========================================================
*/
#define NCR_TRANS_CUR 0x01 /* Modify current neogtiation status */
#define NCR_TRANS_ACTIVE 0x03 /* Assume this is the active target */
#define NCR_TRANS_GOAL 0x04 /* Modify negotiation goal */
#define NCR_TRANS_USER 0x08 /* Modify user negotiation settings */
struct ncr_transinfo {
u_int8_t width;
u_int8_t period;
u_int8_t offset;
};
struct ncr_target_tinfo {
/* Hardware version of our sync settings */
u_int8_t disc_tag;
#define NCR_CUR_DISCENB 0x01
#define NCR_CUR_TAGENB 0x02
#define NCR_USR_DISCENB 0x04
#define NCR_USR_TAGENB 0x08
u_int8_t sval;
struct ncr_transinfo current;
struct ncr_transinfo goal;
struct ncr_transinfo user;
/* Hardware version of our wide settings */
u_int8_t wval;
};
struct tcb {
/*
** during reselection the ncr jumps to this point
** with SFBR set to the encoded target number
** with bit 7 set.
** if it's not this target, jump to the next.
**
** JUMP IF (SFBR != #target#)
** @(next tcb)
*/
struct link jump_tcb;
/*
** load the actual values for the sxfer and the scntl3
** register (sync/wide mode).
**
** SCR_COPY (1);
** @(sval field of this tcb)
** @(sxfer register)
** SCR_COPY (1);
** @(wval field of this tcb)
** @(scntl3 register)
*/
ncrcmd getscr[6];
/*
** if next message is "identify"
** then load the message to SFBR,
** else load 0 to SFBR.
**
** CALL
** <RESEL_LUN>
*/
struct link call_lun;
/*
** now look for the right lun.
**
** JUMP
** @(first nccb of this lun)
*/
struct link jump_lcb;
/*
** pointer to interrupted getcc nccb
*/
nccb_p hold_cp;
/*
** pointer to nccb used for negotiating.
** Avoid to start a nego for all queued commands
** when tagged command queuing is enabled.
*/
nccb_p nego_cp;
/*
** statistical data
*/
u_long transfers;
u_long bytes;
/*
** user settable limits for sync transfer
** and tagged commands.
*/
struct ncr_target_tinfo tinfo;
/*
** the lcb's of this tcb
*/
lcb_p lp[MAX_LUN];
};
/*==========================================================
**
** Declaration of structs: lun control block
**
**==========================================================
*/
struct lcb {
/*
** during reselection the ncr jumps to this point
** with SFBR set to the "Identify" message.
** if it's not this lun, jump to the next.
**
** JUMP IF (SFBR != #lun#)
** @(next lcb of this target)
*/
struct link jump_lcb;
/*
** if next message is "simple tag",
** then load the tag to SFBR,
** else load 0 to SFBR.
**
** CALL
** <RESEL_TAG>
*/
struct link call_tag;
/*
** now look for the right nccb.
**
** JUMP
** @(first nccb of this lun)
*/
struct link jump_nccb;
/*
** start of the nccb chain
*/
nccb_p next_nccb;
/*
** Control of tagged queueing
*/
u_char reqnccbs;
u_char reqlink;
u_char actlink;
u_char usetags;
u_char lasttag;
};
/*==========================================================
**
** Declaration of structs: COMMAND control block
**
**==========================================================
**
** This substructure is copied from the nccb to a
** global address after selection (or reselection)
** and copied back before disconnect.
**
** These fields are accessible to the script processor.
**
**----------------------------------------------------------
*/
struct head {
/*
** Execution of a nccb starts at this point.
** It's a jump to the "SELECT" label
** of the script.
**
** After successful selection the script
** processor overwrites it with a jump to
** the IDLE label of the script.
*/
struct link launch;
/*
** Saved data pointer.
** Points to the position in the script
** responsible for the actual transfer
** of data.
** It's written after reception of a
** "SAVE_DATA_POINTER" message.
** The goalpointer points after
** the last transfer command.
*/
u_int32_t savep;
u_int32_t lastp;
u_int32_t goalp;
/*
** The virtual address of the nccb
** containing this header.
*/
nccb_p cp;
/*
** space for some timestamps to gather
** profiling data about devices and this driver.
*/
struct tstamp stamp;
/*
** status fields.
*/
u_char status[8];
};
/*
** The status bytes are used by the host and the script processor.
**
** The first four byte are copied to the scratchb register
** (declared as scr0..scr3 in ncr_reg.h) just after the select/reselect,
** and copied back just after disconnecting.
** Inside the script the XX_REG are used.
**
** The last four bytes are used inside the script by "COPY" commands.
** Because source and destination must have the same alignment
** in a longword, the fields HAVE to be at the choosen offsets.
** xerr_st (4) 0 (0x34) scratcha
** sync_st (5) 1 (0x05) sxfer
** wide_st (7) 3 (0x03) scntl3
*/
/*
** First four bytes (script)
*/
#define QU_REG scr0
#define HS_REG scr1
#define HS_PRT nc_scr1
#define SS_REG scr2
#define PS_REG scr3
/*
** First four bytes (host)
*/
#define actualquirks phys.header.status[0]
#define host_status phys.header.status[1]
#define s_status phys.header.status[2]
#define parity_status phys.header.status[3]
/*
** Last four bytes (script)
*/
#define xerr_st header.status[4] /* MUST be ==0 mod 4 */
#define sync_st header.status[5] /* MUST be ==1 mod 4 */
#define nego_st header.status[6]
#define wide_st header.status[7] /* MUST be ==3 mod 4 */
/*
** Last four bytes (host)
*/
#define xerr_status phys.xerr_st
#define sync_status phys.sync_st
#define nego_status phys.nego_st
#define wide_status phys.wide_st
/*==========================================================
**
** Declaration of structs: Data structure block
**
**==========================================================
**
** During execution of a nccb by the script processor,
** the DSA (data structure address) register points
** to this substructure of the nccb.
** This substructure contains the header with
** the script-processor-changable data and
** data blocks for the indirect move commands.
**
**----------------------------------------------------------
*/
struct dsb {
/*
** Header.
** Has to be the first entry,
** because it's jumped to by the
** script processor
*/
struct head header;
/*
** Table data for Script
*/
struct scr_tblsel select;
struct scr_tblmove smsg ;
struct scr_tblmove smsg2 ;
struct scr_tblmove cmd ;
struct scr_tblmove scmd ;
struct scr_tblmove sense ;
struct scr_tblmove data [MAX_SCATTER];
};
/*==========================================================
**
** Declaration of structs: Command control block.
**
**==========================================================
**
** During execution of a nccb by the script processor,
** the DSA (data structure address) register points
** to this substructure of the nccb.
** This substructure contains the header with
** the script-processor-changable data and then
** data blocks for the indirect move commands.
**
**----------------------------------------------------------
*/
struct nccb {
/*
** This filler ensures that the global header is
** cache line size aligned.
*/
ncrcmd filler[4];
/*
** during reselection the ncr jumps to this point.
** If a "SIMPLE_TAG" message was received,
** then SFBR is set to the tag.
** else SFBR is set to 0
** If looking for another tag, jump to the next nccb.
**
** JUMP IF (SFBR != #TAG#)
** @(next nccb of this lun)
*/
struct link jump_nccb;
/*
** After execution of this call, the return address
** (in the TEMP register) points to the following
** data structure block.
** So copy it to the DSA register, and start
** processing of this data structure.
**
** CALL
** <RESEL_TMP>
*/
struct link call_tmp;
/*
** This is the data structure which is
** to be executed by the script processor.
*/
struct dsb phys;
/*
** If a data transfer phase is terminated too early
** (after reception of a message (i.e. DISCONNECT)),
** we have to prepare a mini script to transfer
** the rest of the data.
*/
ncrcmd patch[8];
/*
** The general SCSI driver provides a
** pointer to a control block.
*/
union ccb *ccb;
/*
** We prepare a message to be sent after selection,
** and a second one to be sent after getcc selection.
** Contents are IDENTIFY and SIMPLE_TAG.
** While negotiating sync or wide transfer,
** a SDTM or WDTM message is appended.
*/
u_char scsi_smsg [8];
u_char scsi_smsg2[8];
/*
** Lock this nccb.
** Flag is used while looking for a free nccb.
*/
u_long magic;
/*
** Physical address of this instance of nccb
*/
u_long p_nccb;
/*
** Completion time out for this job.
** It's set to time of start + allowed number of seconds.
*/
time_t tlimit;
/*
** All nccbs of one hostadapter are chained.
*/
nccb_p link_nccb;
/*
** All nccbs of one target/lun are chained.
*/
nccb_p next_nccb;
/*
** Sense command
*/
u_char sensecmd[6];
/*
** Tag for this transfer.
** It's patched into jump_nccb.
** If it's not zero, a SIMPLE_TAG
** message is included in smsg.
*/
u_char tag;
};
#define CCB_PHYS(cp,lbl) (cp->p_nccb + offsetof(struct nccb, lbl))
/*==========================================================
**
** Declaration of structs: NCR device descriptor
**
**==========================================================
*/
struct ncb {
/*
** The global header.
** Accessible to both the host and the
** script-processor.
** We assume it is cache line size aligned.
*/
struct head header;
int unit;
/*-----------------------------------------------
** Scripts ..
**-----------------------------------------------
**
** During reselection the ncr jumps to this point.
** The SFBR register is loaded with the encoded target id.
**
** Jump to the first target.
**
** JUMP
** @(next tcb)
*/
struct link jump_tcb;
/*-----------------------------------------------
** Configuration ..
**-----------------------------------------------
**
** virtual and physical addresses
** of the 53c810 chip.
*/
vm_offset_t vaddr;
vm_offset_t paddr;
vm_offset_t vaddr2;
vm_offset_t paddr2;
/*
** pointer to the chip's registers.
*/
volatile
#ifdef __i386__
struct ncr_reg* reg;
#endif
/*
** Scripts instance virtual address.
*/
struct script *script;
struct scripth *scripth;
/*
** Scripts instance physical address.
*/
u_long p_script;
u_long p_scripth;
/*
** The SCSI address of the host adapter.
*/
u_char myaddr;
/*
** timing parameters
*/
u_char minsync; /* Minimum sync period factor */
u_char maxsync; /* Maximum sync period factor */
u_char maxoffs; /* Max scsi offset */
u_char clock_divn; /* Number of clock divisors */
u_long clock_khz; /* SCSI clock frequency in KHz */
u_long features; /* Chip features map */
u_char multiplier; /* Clock multiplier (1,2,4) */
u_char maxburst; /* log base 2 of dwords burst */
/*
** BIOS supplied PCI bus options
*/
u_char rv_scntl3;
u_char rv_dcntl;
u_char rv_dmode;
u_char rv_ctest3;
u_char rv_ctest4;
u_char rv_ctest5;
u_char rv_gpcntl;
u_char rv_stest2;
/*-----------------------------------------------
** CAM SIM information for this instance
**-----------------------------------------------
*/
struct cam_sim *sim;
struct cam_path *path;
/*-----------------------------------------------
** Job control
**-----------------------------------------------
**
** Commands from user
*/
struct usrcmd user;
/*
** Target data
*/
struct tcb target[MAX_TARGET];
/*
** Start queue.
*/
u_int32_t squeue [MAX_START];
u_short squeueput;
/*
** Timeout handler
*/
time_t heartbeat;
u_short ticks;
u_short latetime;
time_t lasttime;
struct callout_handle timeout_ch;
/*-----------------------------------------------
** Debug and profiling
**-----------------------------------------------
**
** register dump
*/
struct ncr_reg regdump;
time_t regtime;
/*
** Profiling data
*/
struct profile profile;
u_long disc_phys;
u_long disc_ref;
/*
** Head of list of all nccbs for this controller.
*/
nccb_p link_nccb;
/*
** message buffers.
** Should be longword aligned,
** because they're written with a
** COPY script command.
*/
u_char msgout[8];
u_char msgin [8];
u_int32_t lastmsg;
/*
** Buffer for STATUS_IN phase.
*/
u_char scratch;
/*
** controller chip dependent maximal transfer width.
*/
u_char maxwide;
#ifdef NCR_IOMAPPED
/*
** address of the ncr control registers in io space
*/
pci_port_t port;
#endif
};
#define NCB_SCRIPT_PHYS(np,lbl) (np->p_script + offsetof (struct script, lbl))
#define NCB_SCRIPTH_PHYS(np,lbl) (np->p_scripth + offsetof (struct scripth,lbl))
/*==========================================================
**
**
** Script for NCR-Processor.
**
** Use ncr_script_fill() to create the variable parts.
** Use ncr_script_copy_and_bind() to make a copy and
** bind to physical addresses.
**
**
**==========================================================
**
** We have to know the offsets of all labels before
** we reach them (for forward jumps).
** Therefore we declare a struct here.
** If you make changes inside the script,
** DONT FORGET TO CHANGE THE LENGTHS HERE!
**
**----------------------------------------------------------
*/
/*
** Script fragments which are loaded into the on-board RAM
** of 825A, 875 and 895 chips.
*/
struct script {
ncrcmd start [ 7];
ncrcmd start0 [ 2];
ncrcmd start1 [ 3];
ncrcmd startpos [ 1];
ncrcmd trysel [ 8];
ncrcmd skip [ 8];
ncrcmd skip2 [ 3];
ncrcmd idle [ 2];
ncrcmd select [ 22];
ncrcmd prepare [ 4];
ncrcmd loadpos [ 14];
ncrcmd prepare2 [ 24];
ncrcmd setmsg [ 5];
ncrcmd clrack [ 2];
ncrcmd dispatch [ 33];
ncrcmd no_data [ 17];
ncrcmd checkatn [ 10];
ncrcmd command [ 15];
ncrcmd status [ 27];
ncrcmd msg_in [ 26];
ncrcmd msg_bad [ 6];
ncrcmd complete [ 13];
ncrcmd cleanup [ 12];
ncrcmd cleanup0 [ 9];
ncrcmd signal [ 12];
ncrcmd save_dp [ 5];
ncrcmd restore_dp [ 5];
ncrcmd disconnect [ 12];
ncrcmd disconnect0 [ 5];
ncrcmd disconnect1 [ 23];
ncrcmd msg_out [ 9];
ncrcmd msg_out_done [ 7];
ncrcmd badgetcc [ 6];
ncrcmd reselect [ 8];
ncrcmd reselect1 [ 8];
ncrcmd reselect2 [ 8];
ncrcmd resel_tmp [ 5];
ncrcmd resel_lun [ 18];
ncrcmd resel_tag [ 24];
ncrcmd data_in [MAX_SCATTER * 4 + 7];
ncrcmd data_out [MAX_SCATTER * 4 + 7];
};
/*
** Script fragments which stay in main memory for all chips.
*/
struct scripth {
ncrcmd tryloop [MAX_START*5+2];
ncrcmd msg_parity [ 6];
ncrcmd msg_reject [ 8];
ncrcmd msg_ign_residue [ 32];
ncrcmd msg_extended [ 18];
ncrcmd msg_ext_2 [ 18];
ncrcmd msg_wdtr [ 27];
ncrcmd msg_ext_3 [ 18];
ncrcmd msg_sdtr [ 27];
ncrcmd msg_out_abort [ 10];
ncrcmd getcc [ 4];
ncrcmd getcc1 [ 5];
#ifdef NCR_GETCC_WITHMSG
ncrcmd getcc2 [ 33];
#else
ncrcmd getcc2 [ 14];
#endif
ncrcmd getcc3 [ 10];
ncrcmd aborttag [ 4];
ncrcmd abort [ 22];
ncrcmd snooptest [ 9];
ncrcmd snoopend [ 2];
};
/*==========================================================
**
**
** Function headers.
**
**
**==========================================================
*/
#ifdef KERNEL
static nccb_p ncr_alloc_nccb (ncb_p np, u_long target, u_long lun);
static void ncr_complete (ncb_p np, nccb_p cp);
static int ncr_delta (int * from, int * to);
static void ncr_exception (ncb_p np);
static void ncr_free_nccb (ncb_p np, nccb_p cp);
static void ncr_freeze_devq (ncb_p np, struct cam_path *path);
static void ncr_selectclock (ncb_p np, u_char scntl3);
static void ncr_getclock (ncb_p np, u_char multiplier);
static nccb_p ncr_get_nccb (ncb_p np, u_long t,u_long l);
#if 0
static u_int32_t ncr_info (int unit);
#endif
static void ncr_init (ncb_p np, char * msg, u_long code);
static void ncr_intr (void *vnp);
static void ncr_int_ma (ncb_p np, u_char dstat);
static void ncr_int_sir (ncb_p np);
static void ncr_int_sto (ncb_p np);
#if 0
static void ncr_min_phys (struct buf *bp);
#endif
static void ncr_poll (struct cam_sim *sim);
static void ncb_profile (ncb_p np, nccb_p cp);
static void ncr_script_copy_and_bind
(ncb_p np, ncrcmd *src, ncrcmd *dst, int len);
static void ncr_script_fill (struct script * scr, struct scripth *scrh);
static int ncr_scatter (struct dsb* phys, vm_offset_t vaddr,
vm_size_t datalen);
static void ncr_getsync (ncb_p np, u_char sfac, u_char *fakp,
u_char *scntl3p);
static void ncr_setsync (ncb_p np, nccb_p cp,u_char scntl3,u_char sxfer,
u_char period);
static void ncr_setwide (ncb_p np, nccb_p cp, u_char wide, u_char ack);
static int ncr_show_msg (u_char * msg);
static int ncr_snooptest (ncb_p np);
static void ncr_action (struct cam_sim *sim, union ccb *ccb);
static void ncr_timeout (void *arg);
static void ncr_wakeup (ncb_p np, u_long code);
static const char* ncr_probe (pcici_t tag, pcidi_t type);
static void ncr_attach (pcici_t tag, int unit);
#endif /* KERNEL */
/*==========================================================
**
**
** Global static data.
**
**
**==========================================================
*/
#if !defined(lint)
static const char ident[] =
"\n$Id: ncr.c,v 1.144 1999/05/06 20:16:37 ken Exp $\n";
#endif
static const u_long ncr_version = NCR_VERSION * 11
+ (u_long) sizeof (struct ncb) * 7
+ (u_long) sizeof (struct nccb) * 5
+ (u_long) sizeof (struct lcb) * 3
+ (u_long) sizeof (struct tcb) * 2;
#ifdef KERNEL
static const int nncr=MAX_UNITS; /* XXX to be replaced by SYSCTL */
static ncb_p ncrp [MAX_UNITS]; /* XXX to be replaced by SYSCTL */
static int ncr_debug = SCSI_NCR_DEBUG;
SYSCTL_INT(_debug, OID_AUTO, ncr_debug, CTLFLAG_RW, &ncr_debug, 0, "");
static int ncr_cache; /* to be aligned _NOT_ static */
/*==========================================================
**
**
** Global static data: auto configure
**
**
**==========================================================
*/
#define NCR_810_ID (0x00011000ul)
#define NCR_815_ID (0x00041000ul)
#define NCR_820_ID (0x00021000ul)
#define NCR_825_ID (0x00031000ul)
#define NCR_860_ID (0x00061000ul)
#define NCR_875_ID (0x000f1000ul)
#define NCR_875_ID2 (0x008f1000ul)
#define NCR_885_ID (0x000d1000ul)
#define NCR_895_ID (0x000c1000ul)
#define NCR_896_ID (0x000b1000ul)
static u_long ncr_count;
static struct pci_device ncr_device = {
"ncr",
ncr_probe,
ncr_attach,
&ncr_count,
NULL
};
COMPAT_PCI_DRIVER (ncr, ncr_device);
static char *ncr_name (ncb_p np)
{
static char name[10];
snprintf(name, sizeof(name), "ncr%d", np->unit);
return (name);
}
/*==========================================================
**
**
** Scripts for NCR-Processor.
**
** Use ncr_script_bind for binding to physical addresses.
**
**
**==========================================================
**
** NADDR generates a reference to a field of the controller data.
** PADDR generates a reference to another part of the script.
** RADDR generates a reference to a script processor register.
** FADDR generates a reference to a script processor register
** with offset.
**
**----------------------------------------------------------
*/
#define RELOC_SOFTC 0x40000000
#define RELOC_LABEL 0x50000000
#define RELOC_REGISTER 0x60000000
#define RELOC_KVAR 0x70000000
#define RELOC_LABELH 0x80000000
#define RELOC_MASK 0xf0000000
#define NADDR(label) (RELOC_SOFTC | offsetof(struct ncb, label))
#define PADDR(label) (RELOC_LABEL | offsetof(struct script, label))
#define PADDRH(label) (RELOC_LABELH | offsetof(struct scripth, label))
#define RADDR(label) (RELOC_REGISTER | REG(label))
#define FADDR(label,ofs)(RELOC_REGISTER | ((REG(label))+(ofs)))
#define KVAR(which) (RELOC_KVAR | (which))
#define KVAR_SECOND (0)
#define KVAR_TICKS (1)
#define KVAR_NCR_CACHE (2)
#define SCRIPT_KVAR_FIRST (0)
#define SCRIPT_KVAR_LAST (3)
/*
* Kernel variables referenced in the scripts.
* THESE MUST ALL BE ALIGNED TO A 4-BYTE BOUNDARY.
*/
static void *script_kvars[] =
{ &time_second, &ticks, &ncr_cache };
static struct script script0 = {
/*--------------------------< START >-----------------------*/ {
/*
** Claim to be still alive ...
*/
SCR_COPY (sizeof (((struct ncb *)0)->heartbeat)),
KVAR (KVAR_SECOND),
NADDR (heartbeat),
/*
** Make data structure address invalid.
** clear SIGP.
*/
SCR_LOAD_REG (dsa, 0xff),
0,
SCR_FROM_REG (ctest2),
0,
}/*-------------------------< START0 >----------------------*/,{
/*
** Hook for interrupted GetConditionCode.
** Will be patched to ... IFTRUE by
** the interrupt handler.
*/
SCR_INT ^ IFFALSE (0),
SIR_SENSE_RESTART,
}/*-------------------------< START1 >----------------------*/,{
/*
** Hook for stalled start queue.
** Will be patched to IFTRUE by the interrupt handler.
*/
SCR_INT ^ IFFALSE (0),
SIR_STALL_RESTART,
/*
** Then jump to a certain point in tryloop.
** Due to the lack of indirect addressing the code
** is self modifying here.
*/
SCR_JUMP,
}/*-------------------------< STARTPOS >--------------------*/,{
PADDRH(tryloop),
}/*-------------------------< TRYSEL >----------------------*/,{
/*
** Now:
** DSA: Address of a Data Structure
** or Address of the IDLE-Label.
**
** TEMP: Address of a script, which tries to
** start the NEXT entry.
**
** Save the TEMP register into the SCRATCHA register.
** Then copy the DSA to TEMP and RETURN.
** This is kind of an indirect jump.
** (The script processor has NO stack, so the
** CALL is actually a jump and link, and the
** RETURN is an indirect jump.)
**
** If the slot was empty, DSA contains the address
** of the IDLE part of this script. The processor
** jumps to IDLE and waits for a reselect.
** It will wake up and try the same slot again
** after the SIGP bit becomes set by the host.
**
** If the slot was not empty, DSA contains
** the address of the phys-part of a nccb.
** The processor jumps to this address.
** phys starts with head,
** head starts with launch,
** so actually the processor jumps to
** the lauch part.
** If the entry is scheduled for execution,
** then launch contains a jump to SELECT.
** If it's not scheduled, it contains a jump to IDLE.
*/
SCR_COPY (4),
RADDR (temp),
RADDR (scratcha),
SCR_COPY (4),
RADDR (dsa),
RADDR (temp),
SCR_RETURN,
0
}/*-------------------------< SKIP >------------------------*/,{
/*
** This entry has been canceled.
** Next time use the next slot.
*/
SCR_COPY (4),
RADDR (scratcha),
PADDR (startpos),
/*
** patch the launch field.
** should look like an idle process.
*/
SCR_COPY_F (4),
RADDR (dsa),
PADDR (skip2),
SCR_COPY (8),
PADDR (idle),
}/*-------------------------< SKIP2 >-----------------------*/,{
0,
SCR_JUMP,
PADDR(start),
}/*-------------------------< IDLE >------------------------*/,{
/*
** Nothing to do?
** Wait for reselect.
*/
SCR_JUMP,
PADDR(reselect),
}/*-------------------------< SELECT >----------------------*/,{
/*
** DSA contains the address of a scheduled
** data structure.
**
** SCRATCHA contains the address of the script,
** which starts the next entry.
**
** Set Initiator mode.
**
** (Target mode is left as an exercise for the reader)
*/
SCR_CLR (SCR_TRG),
0,
SCR_LOAD_REG (HS_REG, 0xff),
0,
/*
** And try to select this target.
*/
SCR_SEL_TBL_ATN ^ offsetof (struct dsb, select),
PADDR (reselect),
/*
** Now there are 4 possibilities:
**
** (1) The ncr looses arbitration.
** This is ok, because it will try again,
** when the bus becomes idle.
** (But beware of the timeout function!)
**
** (2) The ncr is reselected.
** Then the script processor takes the jump
** to the RESELECT label.
**
** (3) The ncr completes the selection.
** Then it will execute the next statement.
**
** (4) There is a selection timeout.
** Then the ncr should interrupt the host and stop.
** Unfortunately, it seems to continue execution
** of the script. But it will fail with an
** IID-interrupt on the next WHEN.
*/
SCR_JUMPR ^ IFTRUE (WHEN (SCR_MSG_IN)),
0,
/*
** Save target id to ctest0 register
*/
SCR_FROM_REG (sdid),
0,
SCR_TO_REG (ctest0),
0,
/*
** Send the IDENTIFY and SIMPLE_TAG messages
** (and the MSG_EXT_SDTR message)
*/
SCR_MOVE_TBL ^ SCR_MSG_OUT,
offsetof (struct dsb, smsg),
#ifdef undef /* XXX better fail than try to deal with this ... */
SCR_JUMPR ^ IFTRUE (WHEN (SCR_MSG_OUT)),
-16,
#endif
SCR_CLR (SCR_ATN),
0,
SCR_COPY (1),
RADDR (sfbr),
NADDR (lastmsg),
/*
** Selection complete.
** Next time use the next slot.
*/
SCR_COPY (4),
RADDR (scratcha),
PADDR (startpos),
}/*-------------------------< PREPARE >----------------------*/,{
/*
** The ncr doesn't have an indirect load
** or store command. So we have to
** copy part of the control block to a
** fixed place, where we can access it.
**
** We patch the address part of a
** COPY command with the DSA-register.
*/
SCR_COPY_F (4),
RADDR (dsa),
PADDR (loadpos),
/*
** then we do the actual copy.
*/
SCR_COPY (sizeof (struct head)),
/*
** continued after the next label ...
*/
}/*-------------------------< LOADPOS >---------------------*/,{
0,
NADDR (header),
/*
** Mark this nccb as not scheduled.
*/
SCR_COPY (8),
PADDR (idle),
NADDR (header.launch),
/*
** Set a time stamp for this selection
*/
SCR_COPY (sizeof (ticks)),
KVAR (KVAR_TICKS),
NADDR (header.stamp.select),
/*
** load the savep (saved pointer) into
** the TEMP register (actual pointer)
*/
SCR_COPY (4),
NADDR (header.savep),
RADDR (temp),
/*
** Initialize the status registers
*/
SCR_COPY (4),
NADDR (header.status),
RADDR (scr0),
}/*-------------------------< PREPARE2 >---------------------*/,{
/*
** Load the synchronous mode register
*/
SCR_COPY (1),
NADDR (sync_st),
RADDR (sxfer),
/*
** Load the wide mode and timing register
*/
SCR_COPY (1),
NADDR (wide_st),
RADDR (scntl3),
/*
** Initialize the msgout buffer with a NOOP message.
*/
SCR_LOAD_REG (scratcha, MSG_NOOP),
0,
SCR_COPY (1),
RADDR (scratcha),
NADDR (msgout),
SCR_COPY (1),
RADDR (scratcha),
NADDR (msgin),
/*
** Message in phase ?
*/
SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)),
PADDR (dispatch),
/*
** Extended or reject message ?
*/
SCR_FROM_REG (sbdl),
0,
SCR_JUMP ^ IFTRUE (DATA (MSG_EXTENDED)),
PADDR (msg_in),
SCR_JUMP ^ IFTRUE (DATA (MSG_MESSAGE_REJECT)),
PADDRH (msg_reject),
/*
** normal processing
*/
SCR_JUMP,
PADDR (dispatch),
}/*-------------------------< SETMSG >----------------------*/,{
SCR_COPY (1),
RADDR (scratcha),
NADDR (msgout),
SCR_SET (SCR_ATN),
0,
}/*-------------------------< CLRACK >----------------------*/,{
/*
** Terminate possible pending message phase.
*/
SCR_CLR (SCR_ACK),
0,
}/*-----------------------< DISPATCH >----------------------*/,{
SCR_FROM_REG (HS_REG),
0,
SCR_INT ^ IFTRUE (DATA (HS_NEGOTIATE)),
SIR_NEGO_FAILED,
/*
** remove bogus output signals
*/
SCR_REG_REG (socl, SCR_AND, CACK|CATN),
0,
SCR_RETURN ^ IFTRUE (WHEN (SCR_DATA_OUT)),
0,
SCR_RETURN ^ IFTRUE (IF (SCR_DATA_IN)),
0,
SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT)),
PADDR (msg_out),
SCR_JUMP ^ IFTRUE (IF (SCR_MSG_IN)),
PADDR (msg_in),
SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND)),
PADDR (command),
SCR_JUMP ^ IFTRUE (IF (SCR_STATUS)),
PADDR (status),
/*
** Discard one illegal phase byte, if required.
*/
SCR_LOAD_REG (scratcha, XE_BAD_PHASE),
0,
SCR_COPY (1),
RADDR (scratcha),
NADDR (xerr_st),
SCR_JUMPR ^ IFFALSE (IF (SCR_ILG_OUT)),
8,
SCR_MOVE_ABS (1) ^ SCR_ILG_OUT,
NADDR (scratch),
SCR_JUMPR ^ IFFALSE (IF (SCR_ILG_IN)),
8,
SCR_MOVE_ABS (1) ^ SCR_ILG_IN,
NADDR (scratch),
SCR_JUMP,
PADDR (dispatch),
}/*-------------------------< NO_DATA >--------------------*/,{
/*
** The target wants to tranfer too much data
** or in the wrong direction.
** Remember that in extended error.
*/
SCR_LOAD_REG (scratcha, XE_EXTRA_DATA),
0,
SCR_COPY (1),
RADDR (scratcha),
NADDR (xerr_st),
/*
** Discard one data byte, if required.
*/
SCR_JUMPR ^ IFFALSE (WHEN (SCR_DATA_OUT)),
8,
SCR_MOVE_ABS (1) ^ SCR_DATA_OUT,
NADDR (scratch),
SCR_JUMPR ^ IFFALSE (IF (SCR_DATA_IN)),
8,
SCR_MOVE_ABS (1) ^ SCR_DATA_IN,
NADDR (scratch),
/*
** .. and repeat as required.
*/
SCR_CALL,
PADDR (dispatch),
SCR_JUMP,
PADDR (no_data),
}/*-------------------------< CHECKATN >--------------------*/,{
/*
** If AAP (bit 1 of scntl0 register) is set
** and a parity error is detected,
** the script processor asserts ATN.
**
** The target should switch to a MSG_OUT phase
** to get the message.
*/
SCR_FROM_REG (socl),
0,
SCR_JUMP ^ IFFALSE (MASK (CATN, CATN)),
PADDR (dispatch),
/*
** count it
*/
SCR_REG_REG (PS_REG, SCR_ADD, 1),
0,
/*
** Prepare a MSG_INITIATOR_DET_ERR message
** (initiator detected error).
** The target should retry the transfer.
*/
SCR_LOAD_REG (scratcha, MSG_INITIATOR_DET_ERR),
0,
SCR_JUMP,
PADDR (setmsg),
}/*-------------------------< COMMAND >--------------------*/,{
/*
** If this is not a GETCC transfer ...
*/
SCR_FROM_REG (SS_REG),
0,
/*<<<*/ SCR_JUMPR ^ IFTRUE (DATA (SCSI_STATUS_CHECK_COND)),
28,
/*
** ... set a timestamp ...
*/
SCR_COPY (sizeof (ticks)),
KVAR (KVAR_TICKS),
NADDR (header.stamp.command),
/*
** ... and send the command
*/
SCR_MOVE_TBL ^ SCR_COMMAND,
offsetof (struct dsb, cmd),
SCR_JUMP,
PADDR (dispatch),
/*
** Send the GETCC command
*/
/*>>>*/ SCR_MOVE_TBL ^ SCR_COMMAND,
offsetof (struct dsb, scmd),
SCR_JUMP,
PADDR (dispatch),
}/*-------------------------< STATUS >--------------------*/,{
/*
** set the timestamp.
*/
SCR_COPY (sizeof (ticks)),
KVAR (KVAR_TICKS),
NADDR (header.stamp.status),
/*
** If this is a GETCC transfer,
*/
SCR_FROM_REG (SS_REG),
0,
/*<<<*/ SCR_JUMPR ^ IFFALSE (DATA (SCSI_STATUS_CHECK_COND)),
40,
/*
** get the status
*/
SCR_MOVE_ABS (1) ^ SCR_STATUS,
NADDR (scratch),
/*
** Save status to scsi_status.
** Mark as complete.
** And wait for disconnect.
*/
SCR_TO_REG (SS_REG),
0,
SCR_REG_REG (SS_REG, SCR_OR, SCSI_STATUS_SENSE),
0,
SCR_LOAD_REG (HS_REG, HS_COMPLETE),
0,
SCR_JUMP,
PADDR (checkatn),
/*
** If it was no GETCC transfer,
** save the status to scsi_status.
*/
/*>>>*/ SCR_MOVE_ABS (1) ^ SCR_STATUS,
NADDR (scratch),
SCR_TO_REG (SS_REG),
0,
/*
** if it was no check condition ...
*/
SCR_JUMP ^ IFTRUE (DATA (SCSI_STATUS_CHECK_COND)),
PADDR (checkatn),
/*
** ... mark as complete.
*/
SCR_LOAD_REG (HS_REG, HS_COMPLETE),
0,
SCR_JUMP,
PADDR (checkatn),
}/*-------------------------< MSG_IN >--------------------*/,{
/*
** Get the first byte of the message
** and save it to SCRATCHA.
**
** The script processor doesn't negate the
** ACK signal after this transfer.
*/
SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
NADDR (msgin[0]),
/*
** Check for message parity error.
*/
SCR_TO_REG (scratcha),
0,
SCR_FROM_REG (socl),
0,
SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)),
PADDRH (msg_parity),
SCR_FROM_REG (scratcha),
0,
/*
** Parity was ok, handle this message.
*/
SCR_JUMP ^ IFTRUE (DATA (MSG_CMDCOMPLETE)),
PADDR (complete),
SCR_JUMP ^ IFTRUE (DATA (MSG_SAVEDATAPOINTER)),
PADDR (save_dp),
SCR_JUMP ^ IFTRUE (DATA (MSG_RESTOREPOINTERS)),
PADDR (restore_dp),
SCR_JUMP ^ IFTRUE (DATA (MSG_DISCONNECT)),
PADDR (disconnect),
SCR_JUMP ^ IFTRUE (DATA (MSG_EXTENDED)),
PADDRH (msg_extended),
SCR_JUMP ^ IFTRUE (DATA (MSG_NOOP)),
PADDR (clrack),
SCR_JUMP ^ IFTRUE (DATA (MSG_MESSAGE_REJECT)),
PADDRH (msg_reject),
SCR_JUMP ^ IFTRUE (DATA (MSG_IGN_WIDE_RESIDUE)),
PADDRH (msg_ign_residue),
/*
** Rest of the messages left as
** an exercise ...
**
** Unimplemented messages:
** fall through to MSG_BAD.
*/
}/*-------------------------< MSG_BAD >------------------*/,{
/*
** unimplemented message - reject it.
*/
SCR_INT,
SIR_REJECT_SENT,
SCR_LOAD_REG (scratcha, MSG_MESSAGE_REJECT),
0,
SCR_JUMP,
PADDR (setmsg),
}/*-------------------------< COMPLETE >-----------------*/,{
/*
** Complete message.
**
** If it's not the get condition code,
** copy TEMP register to LASTP in header.
*/
SCR_FROM_REG (SS_REG),
0,
/*<<<*/ SCR_JUMPR ^ IFTRUE (MASK (SCSI_STATUS_SENSE, SCSI_STATUS_SENSE)),
12,
SCR_COPY (4),
RADDR (temp),
NADDR (header.lastp),
/*>>>*/ /*
** When we terminate the cycle by clearing ACK,
** the target may disconnect immediately.
**
** We don't want to be told of an
** "unexpected disconnect",
** so we disable this feature.
*/
SCR_REG_REG (scntl2, SCR_AND, 0x7f),
0,
/*
** Terminate cycle ...
*/
SCR_CLR (SCR_ACK|SCR_ATN),
0,
/*
** ... and wait for the disconnect.
*/
SCR_WAIT_DISC,
0,
}/*-------------------------< CLEANUP >-------------------*/,{
/*
** dsa: Pointer to nccb
** or xxxxxxFF (no nccb)
**
** HS_REG: Host-Status (<>0!)
*/
SCR_FROM_REG (dsa),
0,
SCR_JUMP ^ IFTRUE (DATA (0xff)),
PADDR (signal),
/*
** dsa is valid.
** save the status registers
*/
SCR_COPY (4),
RADDR (scr0),
NADDR (header.status),
/*
** and copy back the header to the nccb.
*/
SCR_COPY_F (4),
RADDR (dsa),
PADDR (cleanup0),
SCR_COPY (sizeof (struct head)),
NADDR (header),
}/*-------------------------< CLEANUP0 >--------------------*/,{
0,
/*
** If command resulted in "check condition"
** status and is not yet completed,
** try to get the condition code.
*/
SCR_FROM_REG (HS_REG),
0,
/*<<<*/ SCR_JUMPR ^ IFFALSE (MASK (0, HS_DONEMASK)),
16,
SCR_FROM_REG (SS_REG),
0,
SCR_JUMP ^ IFTRUE (DATA (SCSI_STATUS_CHECK_COND)),
PADDRH(getcc2),
}/*-------------------------< SIGNAL >----------------------*/,{
/*
** if status = queue full,
** reinsert in startqueue and stall queue.
*/
/*>>>*/ SCR_FROM_REG (SS_REG),
0,
SCR_INT ^ IFTRUE (DATA (SCSI_STATUS_QUEUE_FULL)),
SIR_STALL_QUEUE,
/*
** And make the DSA register invalid.
*/
SCR_LOAD_REG (dsa, 0xff), /* invalid */
0,
/*
** if job completed ...
*/
SCR_FROM_REG (HS_REG),
0,
/*
** ... signal completion to the host
*/
SCR_INT_FLY ^ IFFALSE (MASK (0, HS_DONEMASK)),
0,
/*
** Auf zu neuen Schandtaten!
*/
SCR_JUMP,
PADDR(start),
}/*-------------------------< SAVE_DP >------------------*/,{
/*
** SAVE_DP message:
** Copy TEMP register to SAVEP in header.
*/
SCR_COPY (4),
RADDR (temp),
NADDR (header.savep),
SCR_JUMP,
PADDR (clrack),
}/*-------------------------< RESTORE_DP >---------------*/,{
/*
** RESTORE_DP message:
** Copy SAVEP in header to TEMP register.
*/
SCR_COPY (4),
NADDR (header.savep),
RADDR (temp),
SCR_JUMP,
PADDR (clrack),
}/*-------------------------< DISCONNECT >---------------*/,{
/*
** If QUIRK_AUTOSAVE is set,
** do an "save pointer" operation.
*/
SCR_FROM_REG (QU_REG),
0,
/*<<<*/ SCR_JUMPR ^ IFFALSE (MASK (QUIRK_AUTOSAVE, QUIRK_AUTOSAVE)),
12,
/*
** like SAVE_DP message:
** Copy TEMP register to SAVEP in header.
*/
SCR_COPY (4),
RADDR (temp),
NADDR (header.savep),
/*>>>*/ /*
** Check if temp==savep or temp==goalp:
** if not, log a missing save pointer message.
** In fact, it's a comparison mod 256.
**
** Hmmm, I hadn't thought that I would be urged to
** write this kind of ugly self modifying code.
**
** It's unbelievable, but the ncr53c8xx isn't able
** to subtract one register from another.
*/
SCR_FROM_REG (temp),
0,
/*
** You are not expected to understand this ..
**
** CAUTION: only little endian architectures supported! XXX
*/
SCR_COPY_F (1),
NADDR (header.savep),
PADDR (disconnect0),
}/*-------------------------< DISCONNECT0 >--------------*/,{
/*<<<*/ SCR_JUMPR ^ IFTRUE (DATA (1)),
20,
/*
** neither this
*/
SCR_COPY_F (1),
NADDR (header.goalp),
PADDR (disconnect1),
}/*-------------------------< DISCONNECT1 >--------------*/,{
SCR_INT ^ IFFALSE (DATA (1)),
SIR_MISSING_SAVE,
/*>>>*/
/*
** DISCONNECTing ...
**
** disable the "unexpected disconnect" feature,
** and remove the ACK signal.
*/
SCR_REG_REG (scntl2, SCR_AND, 0x7f),
0,
SCR_CLR (SCR_ACK|SCR_ATN),
0,
/*
** Wait for the disconnect.
*/
SCR_WAIT_DISC,
0,
/*
** Profiling:
** Set a time stamp,
** and count the disconnects.
*/
SCR_COPY (sizeof (ticks)),
KVAR (KVAR_TICKS),
NADDR (header.stamp.disconnect),
SCR_COPY (4),
NADDR (disc_phys),
RADDR (temp),
SCR_REG_REG (temp, SCR_ADD, 0x01),
0,
SCR_COPY (4),
RADDR (temp),
NADDR (disc_phys),
/*
** Status is: DISCONNECTED.
*/
SCR_LOAD_REG (HS_REG, HS_DISCONNECT),
0,
SCR_JUMP,
PADDR (cleanup),
}/*-------------------------< MSG_OUT >-------------------*/,{
/*
** The target requests a message.
*/
SCR_MOVE_ABS (1) ^ SCR_MSG_OUT,
NADDR (msgout),
SCR_COPY (1),
RADDR (sfbr),
NADDR (lastmsg),
/*
** If it was no ABORT message ...
*/
SCR_JUMP ^ IFTRUE (DATA (MSG_ABORT)),
PADDRH (msg_out_abort),
/*
** ... wait for the next phase
** if it's a message out, send it again, ...
*/
SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_OUT)),
PADDR (msg_out),
}/*-------------------------< MSG_OUT_DONE >--------------*/,{
/*
** ... else clear the message ...
*/
SCR_LOAD_REG (scratcha, MSG_NOOP),
0,
SCR_COPY (4),
RADDR (scratcha),
NADDR (msgout),
/*
** ... and process the next phase
*/
SCR_JUMP,
PADDR (dispatch),
}/*------------------------< BADGETCC >---------------------*/,{
/*
** If SIGP was set, clear it and try again.
*/
SCR_FROM_REG (ctest2),
0,
SCR_JUMP ^ IFTRUE (MASK (CSIGP,CSIGP)),
PADDRH (getcc2),
SCR_INT,
SIR_SENSE_FAILED,
}/*-------------------------< RESELECT >--------------------*/,{
/*
** This NOP will be patched with LED OFF
** SCR_REG_REG (gpreg, SCR_OR, 0x01)
*/
SCR_NO_OP,
0,
/*
** make the DSA invalid.
*/
SCR_LOAD_REG (dsa, 0xff),
0,
SCR_CLR (SCR_TRG),
0,
/*
** Sleep waiting for a reselection.
** If SIGP is set, special treatment.
**
** Zu allem bereit ..
*/
SCR_WAIT_RESEL,
PADDR(reselect2),
}/*-------------------------< RESELECT1 >--------------------*/,{
/*
** This NOP will be patched with LED ON
** SCR_REG_REG (gpreg, SCR_AND, 0xfe)
*/
SCR_NO_OP,
0,
/*
** ... zu nichts zu gebrauchen ?
**
** load the target id into the SFBR
** and jump to the control block.
**
** Look at the declarations of
** - struct ncb
** - struct tcb
** - struct lcb
** - struct nccb
** to understand what's going on.
*/
SCR_REG_SFBR (ssid, SCR_AND, 0x8F),
0,
SCR_TO_REG (ctest0),
0,
SCR_JUMP,
NADDR (jump_tcb),
}/*-------------------------< RESELECT2 >-------------------*/,{
/*
** This NOP will be patched with LED ON
** SCR_REG_REG (gpreg, SCR_AND, 0xfe)
*/
SCR_NO_OP,
0,
/*
** If it's not connected :(
** -> interrupted by SIGP bit.
** Jump to start.
*/
SCR_FROM_REG (ctest2),
0,
SCR_JUMP ^ IFTRUE (MASK (CSIGP,CSIGP)),
PADDR (start),
SCR_JUMP,
PADDR (reselect),
}/*-------------------------< RESEL_TMP >-------------------*/,{
/*
** The return address in TEMP
** is in fact the data structure address,
** so copy it to the DSA register.
*/
SCR_COPY (4),
RADDR (temp),
RADDR (dsa),
SCR_JUMP,
PADDR (prepare),
}/*-------------------------< RESEL_LUN >-------------------*/,{
/*
** come back to this point
** to get an IDENTIFY message
** Wait for a msg_in phase.
*/
/*<<<*/ SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_IN)),
48,
/*
** message phase
** It's not a sony, it's a trick:
** read the data without acknowledging it.
*/
SCR_FROM_REG (sbdl),
0,
/*<<<*/ SCR_JUMPR ^ IFFALSE (MASK (MSG_IDENTIFYFLAG, 0x98)),
32,
/*
** It WAS an Identify message.
** get it and ack it!
*/
SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
NADDR (msgin),
SCR_CLR (SCR_ACK),
0,
/*
** Mask out the lun.
*/
SCR_REG_REG (sfbr, SCR_AND, 0x07),
0,
SCR_RETURN,
0,
/*
** No message phase or no IDENTIFY message:
** return 0.
*/
/*>>>*/ SCR_LOAD_SFBR (0),
0,
SCR_RETURN,
0,
}/*-------------------------< RESEL_TAG >-------------------*/,{
/*
** come back to this point
** to get a SIMPLE_TAG message
** Wait for a MSG_IN phase.
*/
/*<<<*/ SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_IN)),
64,
/*
** message phase
** It's a trick - read the data
** without acknowledging it.
*/
SCR_FROM_REG (sbdl),
0,
/*<<<*/ SCR_JUMPR ^ IFFALSE (DATA (MSG_SIMPLE_Q_TAG)),
48,
/*
** It WAS a SIMPLE_TAG message.
** get it and ack it!
*/
SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
NADDR (msgin),
SCR_CLR (SCR_ACK),
0,
/*
** Wait for the second byte (the tag)
*/
/*<<<*/ SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_IN)),
24,
/*
** Get it and ack it!
*/
SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
NADDR (msgin),
SCR_CLR (SCR_ACK|SCR_CARRY),
0,
SCR_RETURN,
0,
/*
** No message phase or no SIMPLE_TAG message
** or no second byte: return 0.
*/
/*>>>*/ SCR_LOAD_SFBR (0),
0,
SCR_SET (SCR_CARRY),
0,
SCR_RETURN,
0,
}/*-------------------------< DATA_IN >--------------------*/,{
/*
** Because the size depends on the
** #define MAX_SCATTER parameter,
** it is filled in at runtime.
**
** SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_IN)),
** PADDR (no_data),
** SCR_COPY (sizeof (ticks)),
** KVAR (KVAR_TICKS),
** NADDR (header.stamp.data),
** SCR_MOVE_TBL ^ SCR_DATA_IN,
** offsetof (struct dsb, data[ 0]),
**
** ##===========< i=1; i<MAX_SCATTER >=========
** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)),
** || PADDR (checkatn),
** || SCR_MOVE_TBL ^ SCR_DATA_IN,
** || offsetof (struct dsb, data[ i]),
** ##==========================================
**
** SCR_CALL,
** PADDR (checkatn),
** SCR_JUMP,
** PADDR (no_data),
*/
0
}/*-------------------------< DATA_OUT >-------------------*/,{
/*
** Because the size depends on the
** #define MAX_SCATTER parameter,
** it is filled in at runtime.
**
** SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_OUT)),
** PADDR (no_data),
** SCR_COPY (sizeof (ticks)),
** KVAR (KVAR_TICKS),
** NADDR (header.stamp.data),
** SCR_MOVE_TBL ^ SCR_DATA_OUT,
** offsetof (struct dsb, data[ 0]),
**
** ##===========< i=1; i<MAX_SCATTER >=========
** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT)),
** || PADDR (dispatch),
** || SCR_MOVE_TBL ^ SCR_DATA_OUT,
** || offsetof (struct dsb, data[ i]),
** ##==========================================
**
** SCR_CALL,
** PADDR (dispatch),
** SCR_JUMP,
** PADDR (no_data),
**
**---------------------------------------------------------
*/
(u_long)0
}/*--------------------------------------------------------*/
};
static struct scripth scripth0 = {
/*-------------------------< TRYLOOP >---------------------*/{
/*
** Load an entry of the start queue into dsa
** and try to start it by jumping to TRYSEL.
**
** Because the size depends on the
** #define MAX_START parameter, it is filled
** in at runtime.
**
**-----------------------------------------------------------
**
** ##===========< I=0; i<MAX_START >===========
** || SCR_COPY (4),
** || NADDR (squeue[i]),
** || RADDR (dsa),
** || SCR_CALL,
** || PADDR (trysel),
** ##==========================================
**
** SCR_JUMP,
** PADDRH(tryloop),
**
**-----------------------------------------------------------
*/
0
}/*-------------------------< MSG_PARITY >---------------*/,{
/*
** count it
*/
SCR_REG_REG (PS_REG, SCR_ADD, 0x01),
0,
/*
** send a "message parity error" message.
*/
SCR_LOAD_REG (scratcha, MSG_PARITY_ERROR),
0,
SCR_JUMP,
PADDR (setmsg),
}/*-------------------------< MSG_MESSAGE_REJECT >---------------*/,{
/*
** If a negotiation was in progress,
** negotiation failed.
*/
SCR_FROM_REG (HS_REG),
0,
SCR_INT ^ IFTRUE (DATA (HS_NEGOTIATE)),
SIR_NEGO_FAILED,
/*
** else make host log this message
*/
SCR_INT ^ IFFALSE (DATA (HS_NEGOTIATE)),
SIR_REJECT_RECEIVED,
SCR_JUMP,
PADDR (clrack),
}/*-------------------------< MSG_IGN_RESIDUE >----------*/,{
/*
** Terminate cycle
*/
SCR_CLR (SCR_ACK),
0,
SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)),
PADDR (dispatch),
/*
** get residue size.
*/
SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
NADDR (msgin[1]),
/*
** Check for message parity error.
*/
SCR_TO_REG (scratcha),
0,
SCR_FROM_REG (socl),
0,
SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)),
PADDRH (msg_parity),
SCR_FROM_REG (scratcha),
0,
/*
** Size is 0 .. ignore message.
*/
SCR_JUMP ^ IFTRUE (DATA (0)),
PADDR (clrack),
/*
** Size is not 1 .. have to interrupt.
*/
/*<<<*/ SCR_JUMPR ^ IFFALSE (DATA (1)),
40,
/*
** Check for residue byte in swide register
*/
SCR_FROM_REG (scntl2),
0,
/*<<<*/ SCR_JUMPR ^ IFFALSE (MASK (WSR, WSR)),
16,
/*
** There IS data in the swide register.
** Discard it.
*/
SCR_REG_REG (scntl2, SCR_OR, WSR),
0,
SCR_JUMP,
PADDR (clrack),
/*
** Load again the size to the sfbr register.
*/
/*>>>*/ SCR_FROM_REG (scratcha),
0,
/*>>>*/ SCR_INT,
SIR_IGN_RESIDUE,
SCR_JUMP,
PADDR (clrack),
}/*-------------------------< MSG_EXTENDED >-------------*/,{
/*
** Terminate cycle
*/
SCR_CLR (SCR_ACK),
0,
SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)),
PADDR (dispatch),
/*
** get length.
*/
SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
NADDR (msgin[1]),
/*
** Check for message parity error.
*/
SCR_TO_REG (scratcha),
0,
SCR_FROM_REG (socl),
0,
SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)),
PADDRH (msg_parity),
SCR_FROM_REG (scratcha),
0,
/*
*/
SCR_JUMP ^ IFTRUE (DATA (3)),
PADDRH (msg_ext_3),
SCR_JUMP ^ IFFALSE (DATA (2)),
PADDR (msg_bad),
}/*-------------------------< MSG_EXT_2 >----------------*/,{
SCR_CLR (SCR_ACK),
0,
SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)),
PADDR (dispatch),
/*
** get extended message code.
*/
SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
NADDR (msgin[2]),
/*
** Check for message parity error.
*/
SCR_TO_REG (scratcha),
0,
SCR_FROM_REG (socl),
0,
SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)),
PADDRH (msg_parity),
SCR_FROM_REG (scratcha),
0,
SCR_JUMP ^ IFTRUE (DATA (MSG_EXT_WDTR)),
PADDRH (msg_wdtr),
/*
** unknown extended message
*/
SCR_JUMP,
PADDR (msg_bad)
}/*-------------------------< MSG_WDTR >-----------------*/,{
SCR_CLR (SCR_ACK),
0,
SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)),
PADDR (dispatch),
/*
** get data bus width
*/
SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
NADDR (msgin[3]),
SCR_FROM_REG (socl),
0,
SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)),
PADDRH (msg_parity),
/*
** let the host do the real work.
*/
SCR_INT,
SIR_NEGO_WIDE,
/*
** let the target fetch our answer.
*/
SCR_SET (SCR_ATN),
0,
SCR_CLR (SCR_ACK),
0,
SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT)),
SIR_NEGO_PROTO,
/*
** Send the MSG_EXT_WDTR
*/
SCR_MOVE_ABS (4) ^ SCR_MSG_OUT,
NADDR (msgout),
SCR_CLR (SCR_ATN),
0,
SCR_COPY (1),
RADDR (sfbr),
NADDR (lastmsg),
SCR_JUMP,
PADDR (msg_out_done),
}/*-------------------------< MSG_EXT_3 >----------------*/,{
SCR_CLR (SCR_ACK),
0,
SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)),
PADDR (dispatch),
/*
** get extended message code.
*/
SCR_MOVE_ABS (1) ^ SCR_MSG_IN,
NADDR (msgin[2]),
/*
** Check for message parity error.
*/
SCR_TO_REG (scratcha),
0,
SCR_FROM_REG (socl),
0,
SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)),
PADDRH (msg_parity),
SCR_FROM_REG (scratcha),
0,
SCR_JUMP ^ IFTRUE (DATA (MSG_EXT_SDTR)),
PADDRH (msg_sdtr),
/*
** unknown extended message
*/
SCR_JUMP,
PADDR (msg_bad)
}/*-------------------------< MSG_SDTR >-----------------*/,{
SCR_CLR (SCR_ACK),
0,
SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)),
PADDR (dispatch),
/*
** get period and offset
*/
SCR_MOVE_ABS (2) ^ SCR_MSG_IN,
NADDR (msgin[3]),
SCR_FROM_REG (socl),
0,
SCR_JUMP ^ IFTRUE (MASK (CATN, CATN)),
PADDRH (msg_parity),
/*
** let the host do the real work.
*/
SCR_INT,
SIR_NEGO_SYNC,
/*
** let the target fetch our answer.
*/
SCR_SET (SCR_ATN),
0,
SCR_CLR (SCR_ACK),
0,
SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT)),
SIR_NEGO_PROTO,
/*
** Send the MSG_EXT_SDTR
*/
SCR_MOVE_ABS (5) ^ SCR_MSG_OUT,
NADDR (msgout),
SCR_CLR (SCR_ATN),
0,
SCR_COPY (1),
RADDR (sfbr),
NADDR (lastmsg),
SCR_JUMP,
PADDR (msg_out_done),
}/*-------------------------< MSG_OUT_ABORT >-------------*/,{
/*
** After ABORT message,
**
** expect an immediate disconnect, ...
*/
SCR_REG_REG (scntl2, SCR_AND, 0x7f),
0,
SCR_CLR (SCR_ACK|SCR_ATN),
0,
SCR_WAIT_DISC,
0,
/*
** ... and set the status to "ABORTED"
*/
SCR_LOAD_REG (HS_REG, HS_ABORTED),
0,
SCR_JUMP,
PADDR (cleanup),
}/*-------------------------< GETCC >-----------------------*/,{
/*
** The ncr doesn't have an indirect load
** or store command. So we have to
** copy part of the control block to a
** fixed place, where we can modify it.
**
** We patch the address part of a COPY command
** with the address of the dsa register ...
*/
SCR_COPY_F (4),
RADDR (dsa),
PADDRH (getcc1),
/*
** ... then we do the actual copy.
*/
SCR_COPY (sizeof (struct head)),
}/*-------------------------< GETCC1 >----------------------*/,{
0,
NADDR (header),
/*
** Initialize the status registers
*/
SCR_COPY (4),
NADDR (header.status),
RADDR (scr0),
}/*-------------------------< GETCC2 >----------------------*/,{
/*
** Get the condition code from a target.
**
** DSA points to a data structure.
** Set TEMP to the script location
** that receives the condition code.
**
** Because there is no script command
** to load a longword into a register,
** we use a CALL command.
*/
/*<<<*/ SCR_CALLR,
24,
/*
** Get the condition code.
*/
SCR_MOVE_TBL ^ SCR_DATA_IN,
offsetof (struct dsb, sense),
/*
** No data phase may follow!
*/
SCR_CALL,
PADDR (checkatn),
SCR_JUMP,
PADDR (no_data),
/*>>>*/
/*
** The CALL jumps to this point.
** Prepare for a RESTORE_POINTER message.
** Save the TEMP register into the saved pointer.
*/
SCR_COPY (4),
RADDR (temp),
NADDR (header.savep),
/*
** Load scratcha, because in case of a selection timeout,
** the host will expect a new value for startpos in
** the scratcha register.
*/
SCR_COPY (4),
PADDR (startpos),
RADDR (scratcha),
#ifdef NCR_GETCC_WITHMSG
/*
** If QUIRK_NOMSG is set, select without ATN.
** and don't send a message.
*/
SCR_FROM_REG (QU_REG),
0,
SCR_JUMP ^ IFTRUE (MASK (QUIRK_NOMSG, QUIRK_NOMSG)),
PADDRH(getcc3),
/*
** Then try to connect to the target.
** If we are reselected, special treatment
** of the current job is required before
** accepting the reselection.
*/
SCR_SEL_TBL_ATN ^ offsetof (struct dsb, select),
PADDR(badgetcc),
/*
** save target id.
*/
SCR_FROM_REG (sdid),
0,
SCR_TO_REG (ctest0),
0,
/*
** Send the IDENTIFY message.
** In case of short transfer, remove ATN.
*/
SCR_MOVE_TBL ^ SCR_MSG_OUT,
offsetof (struct dsb, smsg2),
SCR_CLR (SCR_ATN),
0,
/*
** save the first byte of the message.
*/
SCR_COPY (1),
RADDR (sfbr),
NADDR (lastmsg),
SCR_JUMP,
PADDR (prepare2),
#endif
}/*-------------------------< GETCC3 >----------------------*/,{
/*
** Try to connect to the target.
** If we are reselected, special treatment
** of the current job is required before
** accepting the reselection.
**
** Silly target won't accept a message.
** Select without ATN.
*/
SCR_SEL_TBL ^ offsetof (struct dsb, select),
PADDR(badgetcc),
/*
** save target id.
*/
SCR_FROM_REG (sdid),
0,
SCR_TO_REG (ctest0),
0,
/*
** Force error if selection timeout
*/
SCR_JUMPR ^ IFTRUE (WHEN (SCR_MSG_IN)),
0,
/*
** don't negotiate.
*/
SCR_JUMP,
PADDR (prepare2),
}/*-------------------------< ABORTTAG >-------------------*/,{
/*
** Abort a bad reselection.
** Set the message to ABORT vs. ABORT_TAG
*/
SCR_LOAD_REG (scratcha, MSG_ABORT_TAG),
0,
SCR_JUMPR ^ IFFALSE (CARRYSET),
8,
}/*-------------------------< ABORT >----------------------*/,{
SCR_LOAD_REG (scratcha, MSG_ABORT),
0,
SCR_COPY (1),
RADDR (scratcha),
NADDR (msgout),
SCR_SET (SCR_ATN),
0,
SCR_CLR (SCR_ACK),
0,
/*
** and send it.
** we expect an immediate disconnect
*/
SCR_REG_REG (scntl2, SCR_AND, 0x7f),
0,
SCR_MOVE_ABS (1) ^ SCR_MSG_OUT,
NADDR (msgout),
SCR_COPY (1),
RADDR (sfbr),
NADDR (lastmsg),
SCR_CLR (SCR_ACK|SCR_ATN),
0,
SCR_WAIT_DISC,
0,
SCR_JUMP,
PADDR (start),
}/*-------------------------< SNOOPTEST >-------------------*/,{
/*
** Read the variable.
*/
SCR_COPY (4),
KVAR (KVAR_NCR_CACHE),
RADDR (scratcha),
/*
** Write the variable.
*/
SCR_COPY (4),
RADDR (temp),
KVAR (KVAR_NCR_CACHE),
/*
** Read back the variable.
*/
SCR_COPY (4),
KVAR (KVAR_NCR_CACHE),
RADDR (temp),
}/*-------------------------< SNOOPEND >-------------------*/,{
/*
** And stop.
*/
SCR_INT,
99,
}/*--------------------------------------------------------*/
};
/*==========================================================
**
**
** Fill in #define dependent parts of the script
**
**
**==========================================================
*/
void ncr_script_fill (struct script * scr, struct scripth * scrh)
{
int i;
ncrcmd *p;
p = scrh->tryloop;
for (i=0; i<MAX_START; i++) {
*p++ =SCR_COPY (4);
*p++ =NADDR (squeue[i]);
*p++ =RADDR (dsa);
*p++ =SCR_CALL;
*p++ =PADDR (trysel);
};
*p++ =SCR_JUMP;
*p++ =PADDRH(tryloop);
assert ((char *)p == (char *)&scrh->tryloop + sizeof (scrh->tryloop));
p = scr->data_in;
*p++ =SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_IN));
*p++ =PADDR (no_data);
*p++ =SCR_COPY (sizeof (ticks));
*p++ =(ncrcmd) KVAR (KVAR_TICKS);
*p++ =NADDR (header.stamp.data);
*p++ =SCR_MOVE_TBL ^ SCR_DATA_IN;
*p++ =offsetof (struct dsb, data[ 0]);
for (i=1; i<MAX_SCATTER; i++) {
*p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN));
*p++ =PADDR (checkatn);
*p++ =SCR_MOVE_TBL ^ SCR_DATA_IN;
*p++ =offsetof (struct dsb, data[i]);
};
*p++ =SCR_CALL;
*p++ =PADDR (checkatn);
*p++ =SCR_JUMP;
*p++ =PADDR (no_data);
assert ((char *)p == (char *)&scr->data_in + sizeof (scr->data_in));
p = scr->data_out;
*p++ =SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_OUT));
*p++ =PADDR (no_data);
*p++ =SCR_COPY (sizeof (ticks));
*p++ =(ncrcmd) KVAR (KVAR_TICKS);
*p++ =NADDR (header.stamp.data);
*p++ =SCR_MOVE_TBL ^ SCR_DATA_OUT;
*p++ =offsetof (struct dsb, data[ 0]);
for (i=1; i<MAX_SCATTER; i++) {
*p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT));
*p++ =PADDR (dispatch);
*p++ =SCR_MOVE_TBL ^ SCR_DATA_OUT;
*p++ =offsetof (struct dsb, data[i]);
};
*p++ =SCR_CALL;
*p++ =PADDR (dispatch);
*p++ =SCR_JUMP;
*p++ =PADDR (no_data);
assert ((char *)p == (char *)&scr->data_out + sizeof (scr->data_out));
}
/*==========================================================
**
**
** Copy and rebind a script.
**
**
**==========================================================
*/
static void ncr_script_copy_and_bind (ncb_p np, ncrcmd *src, ncrcmd *dst, int len)
{
ncrcmd opcode, new, old, tmp1, tmp2;
ncrcmd *start, *end;
int relocs, offset;
start = src;
end = src + len/4;
offset = 0;
while (src < end) {
opcode = *src++;
WRITESCRIPT_OFF(dst, offset, opcode);
offset += 4;
/*
** If we forget to change the length
** in struct script, a field will be
** padded with 0. This is an illegal
** command.
*/
if (opcode == 0) {
printf ("%s: ERROR0 IN SCRIPT at %d.\n",
ncr_name(np), (int) (src-start-1));
DELAY (1000000);
};
if (DEBUG_FLAGS & DEBUG_SCRIPT)
printf ("%p: <%x>\n",
(src-1), (unsigned)opcode);
/*
** We don't have to decode ALL commands
*/
switch (opcode >> 28) {
case 0xc:
/*
** COPY has TWO arguments.
*/
relocs = 2;
tmp1 = src[0];
if ((tmp1 & RELOC_MASK) == RELOC_KVAR)
tmp1 = 0;
tmp2 = src[1];
if ((tmp2 & RELOC_MASK) == RELOC_KVAR)
tmp2 = 0;
if ((tmp1 ^ tmp2) & 3) {
printf ("%s: ERROR1 IN SCRIPT at %d.\n",
ncr_name(np), (int) (src-start-1));
DELAY (1000000);
}
/*
** If PREFETCH feature not enabled, remove
** the NO FLUSH bit if present.
*/
if ((opcode & SCR_NO_FLUSH) && !(np->features&FE_PFEN))
WRITESCRIPT_OFF(dst, offset - 4,
(opcode & ~SCR_NO_FLUSH));
break;
case 0x0:
/*
** MOVE (absolute address)
*/
relocs = 1;
break;
case 0x8:
/*
** JUMP / CALL
** dont't relocate if relative :-)
*/
if (opcode & 0x00800000)
relocs = 0;
else
relocs = 1;
break;
case 0x4:
case 0x5:
case 0x6:
case 0x7:
relocs = 1;
break;
default:
relocs = 0;
break;
};
if (relocs) {
while (relocs--) {
old = *src++;
switch (old & RELOC_MASK) {
case RELOC_REGISTER:
new = (old & ~RELOC_MASK) + np->paddr;
break;
case RELOC_LABEL:
new = (old & ~RELOC_MASK) + np->p_script;
break;
case RELOC_LABELH:
new = (old & ~RELOC_MASK) + np->p_scripth;
break;
case RELOC_SOFTC:
new = (old & ~RELOC_MASK) + vtophys(np);
break;
case RELOC_KVAR:
if (((old & ~RELOC_MASK) <
SCRIPT_KVAR_FIRST) ||
((old & ~RELOC_MASK) >
SCRIPT_KVAR_LAST))
panic("ncr KVAR out of range");
new = vtophys(script_kvars[old &
~RELOC_MASK]);
break;
case 0:
/* Don't relocate a 0 address. */
if (old == 0) {
new = old;
break;
}
/* fall through */
default:
panic("ncr_script_copy_and_bind: weird relocation %x @ %d\n", old, (int)(src - start));
break;
}
WRITESCRIPT_OFF(dst, offset, new);
offset += 4;
}
} else {
WRITESCRIPT_OFF(dst, offset, *src++);
offset += 4;
}
};
}
/*==========================================================
**
**
** Auto configuration.
**
**
**==========================================================
*/
#if 0
/*----------------------------------------------------------
**
** Reduce the transfer length to the max value
** we can transfer safely.
**
** Reading a block greater then MAX_SIZE from the
** raw (character) device exercises a memory leak
** in the vm subsystem. This is common to ALL devices.
** We have submitted a description of this bug to
** <FreeBSD-bugs@freefall.cdrom.com>.
** It should be fixed in the current release.
**
**----------------------------------------------------------
*/
void ncr_min_phys (struct buf *bp)
{
if ((unsigned long)bp->b_bcount > MAX_SIZE) bp->b_bcount = MAX_SIZE;
}
#endif
#if 0
/*----------------------------------------------------------
**
** Maximal number of outstanding requests per target.
**
**----------------------------------------------------------
*/
u_int32_t ncr_info (int unit)
{
return (1); /* may be changed later */
}
#endif
/*----------------------------------------------------------
**
** NCR chip devices table and chip look up function.
** Features bit are defined in ncrreg.h. Is it the
** right place?
**
**----------------------------------------------------------
*/
typedef struct {
unsigned long device_id;
unsigned short minrevid;
char *name;
unsigned char maxburst;
unsigned char maxoffs;
unsigned char clock_divn;
unsigned int features;
} ncr_chip;
static ncr_chip ncr_chip_table[] = {
{NCR_810_ID, 0x00, "ncr 53c810 fast10 scsi", 4, 8, 4,
FE_ERL}
,
{NCR_810_ID, 0x10, "ncr 53c810a fast10 scsi", 4, 8, 4,
FE_ERL|FE_LDSTR|FE_PFEN|FE_BOF}
,
{NCR_815_ID, 0x00, "ncr 53c815 fast10 scsi", 4, 8, 4,
FE_ERL|FE_BOF}
,
{NCR_820_ID, 0x00, "ncr 53c820 fast10 wide scsi", 4, 8, 4,
FE_WIDE|FE_ERL}
,
{NCR_825_ID, 0x00, "ncr 53c825 fast10 wide scsi", 4, 8, 4,
FE_WIDE|FE_ERL|FE_BOF}
,
{NCR_825_ID, 0x10, "ncr 53c825a fast10 wide scsi", 7, 8, 4,
FE_WIDE|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM}
,
{NCR_860_ID, 0x00, "ncr 53c860 fast20 scsi", 4, 8, 5,
FE_ULTRA|FE_CLK80|FE_CACHE_SET|FE_LDSTR|FE_PFEN}
,
{NCR_875_ID, 0x00, "ncr 53c875 fast20 wide scsi", 7, 16, 5,
FE_WIDE|FE_ULTRA|FE_CLK80|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM}
,
{NCR_875_ID, 0x02, "ncr 53c875 fast20 wide scsi", 7, 16, 5,
FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM}
,
{NCR_875_ID2, 0x00, "ncr 53c875j fast20 wide scsi", 7, 16, 5,
FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM}
,
{NCR_885_ID, 0x00, "ncr 53c885 fast20 wide scsi", 7, 16, 5,
FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM}
,
{NCR_895_ID, 0x00, "ncr 53c895 fast40 wide scsi", 7, 31, 7,
FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM}
,
{NCR_896_ID, 0x00, "ncr 53c896 fast40 wide scsi", 7, 31, 7,
FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM}
};
static int ncr_chip_lookup(u_long device_id, u_char revision_id)
{
int i, found;
found = -1;
for (i = 0; i < sizeof(ncr_chip_table)/sizeof(ncr_chip_table[0]); i++) {
if (device_id == ncr_chip_table[i].device_id &&
ncr_chip_table[i].minrevid <= revision_id) {
if (found < 0 ||
ncr_chip_table[found].minrevid
< ncr_chip_table[i].minrevid) {
found = i;
}
}
}
return found;
}
/*----------------------------------------------------------
**
** Probe the hostadapter.
**
**----------------------------------------------------------
*/
static const char* ncr_probe (pcici_t tag, pcidi_t type)
{
u_char rev = pci_conf_read (tag, PCI_CLASS_REG) & 0xff;
int i;
i = ncr_chip_lookup(type, rev);
if (i >= 0)
return ncr_chip_table[i].name;
return (NULL);
}
/*==========================================================
**
** NCR chip clock divisor table.
** Divisors are multiplied by 10,000,000 in order to make
** calculations more simple.
**
**==========================================================
*/
#define _5M 5000000
static u_long div_10M[] =
{2*_5M, 3*_5M, 4*_5M, 6*_5M, 8*_5M, 12*_5M, 16*_5M};
/*===============================================================
**
** NCR chips allow burst lengths of 2, 4, 8, 16, 32, 64, 128
** transfers. 32,64,128 are only supported by 875 and 895 chips.
** We use log base 2 (burst length) as internal code, with
** value 0 meaning "burst disabled".
**
**===============================================================
*/
/*
* Burst length from burst code.
*/
#define burst_length(bc) (!(bc))? 0 : 1 << (bc)
/*
* Burst code from io register bits.
*/
#define burst_code(dmode, ctest4, ctest5) \
(ctest4) & 0x80? 0 : (((dmode) & 0xc0) >> 6) + ((ctest5) & 0x04) + 1
/*
* Set initial io register bits from burst code.
*/
static void
ncr_init_burst(ncb_p np, u_char bc)
{
np->rv_ctest4 &= ~0x80;
np->rv_dmode &= ~(0x3 << 6);
np->rv_ctest5 &= ~0x4;
if (!bc) {
np->rv_ctest4 |= 0x80;
}
else {
--bc;
np->rv_dmode |= ((bc & 0x3) << 6);
np->rv_ctest5 |= (bc & 0x4);
}
}
/*==========================================================
**
**
** Auto configuration: attach and init a host adapter.
**
**
**==========================================================
*/
static void
ncr_attach (pcici_t config_id, int unit)
{
ncb_p np = (struct ncb*) 0;
u_char rev = 0;
u_long period;
int i;
u_int8_t usrsync;
u_int8_t usrwide;
struct cam_devq *devq;
/*
** allocate and initialize structures.
*/
np = (ncb_p) malloc (sizeof (struct ncb), M_DEVBUF, M_NOWAIT);
if (!np) return;
ncrp[unit]=np;
bzero (np, sizeof (*np));
np->unit = unit;
/*
** Try to map the controller chip to
** virtual and physical memory.
*/
if (!pci_map_mem (config_id, 0x14, &np->vaddr, &np->paddr))
return;
/*
** Make the controller's registers available.
** Now the INB INW INL OUTB OUTW OUTL macros
** can be used safely.
*/
#ifdef __i386__
np->reg = (struct ncr_reg*) np->vaddr;
#endif
#ifdef NCR_IOMAPPED
/*
** Try to map the controller chip into iospace.
*/
if (!pci_map_port (config_id, 0x10, &np->port))
return;
#endif
/*
** Save some controller register default values
*/
np->rv_scntl3 = INB(nc_scntl3) & 0x77;
np->rv_dmode = INB(nc_dmode) & 0xce;
np->rv_dcntl = INB(nc_dcntl) & 0xa9;
np->rv_ctest3 = INB(nc_ctest3) & 0x01;
np->rv_ctest4 = INB(nc_ctest4) & 0x88;
np->rv_ctest5 = INB(nc_ctest5) & 0x24;
np->rv_gpcntl = INB(nc_gpcntl);
np->rv_stest2 = INB(nc_stest2) & 0x20;
if (bootverbose >= 2) {
printf ("\tBIOS values: SCNTL3:%02x DMODE:%02x DCNTL:%02x\n",
np->rv_scntl3, np->rv_dmode, np->rv_dcntl);
printf ("\t CTEST3:%02x CTEST4:%02x CTEST5:%02x\n",
np->rv_ctest3, np->rv_ctest4, np->rv_ctest5);
}
np->rv_dcntl |= NOCOM;
/*
** Do chip dependent initialization.
*/
rev = pci_conf_read (config_id, PCI_CLASS_REG) & 0xff;
/*
** Get chip features from chips table.
*/
i = ncr_chip_lookup(pci_conf_read(config_id, PCI_ID_REG), rev);
if (i >= 0) {
np->maxburst = ncr_chip_table[i].maxburst;
np->maxoffs = ncr_chip_table[i].maxoffs;
np->clock_divn = ncr_chip_table[i].clock_divn;
np->features = ncr_chip_table[i].features;
} else { /* Should'nt happen if probe() is ok */
np->maxburst = 4;
np->maxoffs = 8;
np->clock_divn = 4;
np->features = FE_ERL;
}
np->maxwide = np->features & FE_WIDE ? 1 : 0;
np->clock_khz = np->features & FE_CLK80 ? 80000 : 40000;
if (np->features & FE_QUAD) np->multiplier = 4;
else if (np->features & FE_DBLR) np->multiplier = 2;
else np->multiplier = 1;
/*
** Get the frequency of the chip's clock.
** Find the right value for scntl3.
*/
if (np->features & (FE_ULTRA|FE_ULTRA2))
ncr_getclock(np, np->multiplier);
#ifdef NCR_TEKRAM_EEPROM
if (bootverbose) {
printf ("%s: Tekram EEPROM read %s\n",
ncr_name(np),
read_tekram_eeprom (np, NULL) ?
"succeeded" : "failed");
}
#endif /* NCR_TEKRAM_EEPROM */
/*
* If scntl3 != 0, we assume BIOS is present.
*/
if (np->rv_scntl3)
np->features |= FE_BIOS;
/*
* Divisor to be used for async (timer pre-scaler).
*/
i = np->clock_divn - 1;
while (i >= 0) {
--i;
if (10ul * SCSI_NCR_MIN_ASYNC * np->clock_khz > div_10M[i]) {
++i;
break;
}
}
np->rv_scntl3 = i+1;
/*
* Minimum synchronous period factor supported by the chip.
* Btw, 'period' is in tenths of nanoseconds.
*/
period = (4 * div_10M[0] + np->clock_khz - 1) / np->clock_khz;
if (period <= 250) np->minsync = 10;
else if (period <= 303) np->minsync = 11;
else if (period <= 500) np->minsync = 12;
else np->minsync = (period + 40 - 1) / 40;
/*
* Check against chip SCSI standard support (SCSI-2,ULTRA,ULTRA2).
*/
if (np->minsync < 25 && !(np->features & (FE_ULTRA|FE_ULTRA2)))
np->minsync = 25;
else if (np->minsync < 12 && !(np->features & FE_ULTRA2))
np->minsync = 12;
/*
* Maximum synchronous period factor supported by the chip.
*/
period = (11 * div_10M[np->clock_divn - 1]) / (4 * np->clock_khz);
np->maxsync = period > 2540 ? 254 : period / 10;
/*
* Now, some features available with Symbios compatible boards.
* LED support through GPIO0 and DIFF support.
*/
#ifdef SCSI_NCR_SYMBIOS_COMPAT
if (!(np->rv_gpcntl & 0x01))
np->features |= FE_LED0;
#if 0 /* Not safe enough without NVRAM support or user settable option */
if (!(INB(nc_gpreg) & 0x08))
np->features |= FE_DIFF;
#endif
#endif /* SCSI_NCR_SYMBIOS_COMPAT */
/*
* Prepare initial IO registers settings.
* Trust BIOS only if we believe we have one and if we want to.
*/
#ifdef SCSI_NCR_TRUST_BIOS
if (!(np->features & FE_BIOS)) {
#else
if (1) {
#endif
np->rv_dmode = 0;
np->rv_dcntl = NOCOM;
np->rv_ctest3 = 0;
np->rv_ctest4 = MPEE;
np->rv_ctest5 = 0;
np->rv_stest2 = 0;
if (np->features & FE_ERL)
np->rv_dmode |= ERL; /* Enable Read Line */
if (np->features & FE_BOF)
np->rv_dmode |= BOF; /* Burst Opcode Fetch */
if (np->features & FE_ERMP)
np->rv_dmode |= ERMP; /* Enable Read Multiple */
if (np->features & FE_CLSE)
np->rv_dcntl |= CLSE; /* Cache Line Size Enable */
if (np->features & FE_WRIE)
np->rv_ctest3 |= WRIE; /* Write and Invalidate */
if (np->features & FE_PFEN)
np->rv_dcntl |= PFEN; /* Prefetch Enable */
if (np->features & FE_DFS)
np->rv_ctest5 |= DFS; /* Dma Fifo Size */
if (np->features & FE_DIFF)
np->rv_stest2 |= 0x20; /* Differential mode */
ncr_init_burst(np, np->maxburst); /* Max dwords burst length */
} else {
np->maxburst =
burst_code(np->rv_dmode, np->rv_ctest4, np->rv_ctest5);
}
#ifndef NCR_IOMAPPED
/*
** Get on-chip SRAM address, if supported
*/
if ((np->features & FE_RAM) && sizeof(struct script) <= 4096)
(void)(!pci_map_mem (config_id,0x18, &np->vaddr2, &np->paddr2));
#endif /* !NCR_IOMAPPED */
/*
** Allocate structure for script relocation.
*/
if (np->vaddr2 != NULL) {
#ifdef __alpha__
np->script = NULL;
#else
np->script = (struct script *) np->vaddr2;
#endif
np->p_script = np->paddr2;
} else if (sizeof (struct script) > PAGE_SIZE) {
np->script = (struct script*) vm_page_alloc_contig
(round_page(sizeof (struct script)),
0x100000, 0xffffffff, PAGE_SIZE);
} else {
np->script = (struct script *)
malloc (sizeof (struct script), M_DEVBUF, M_WAITOK);
}
/* XXX JGibbs - Use contigmalloc */
if (sizeof (struct scripth) > PAGE_SIZE) {
np->scripth = (struct scripth*) vm_page_alloc_contig
(round_page(sizeof (struct scripth)),
0x100000, 0xffffffff, PAGE_SIZE);
} else
{
np->scripth = (struct scripth *)
malloc (sizeof (struct scripth), M_DEVBUF, M_WAITOK);
}
#ifdef SCSI_NCR_PCI_CONFIG_FIXUP
/*
** If cache line size is enabled, check PCI config space and
** try to fix it up if necessary.
*/
#ifdef PCIR_CACHELNSZ /* To be sure that new PCI stuff is present */
{
u_char cachelnsz = pci_cfgread(config_id, PCIR_CACHELNSZ, 1);
u_short command = pci_cfgread(config_id, PCIR_COMMAND, 2);
if (!cachelnsz) {
cachelnsz = 8;
printf("%s: setting PCI cache line size register to %d.\n",
ncr_name(np), (int)cachelnsz);
pci_cfgwrite(config_id, PCIR_CACHELNSZ, cachelnsz, 1);
}
if (!(command & (1<<4))) {
command |= (1<<4);
printf("%s: setting PCI command write and invalidate.\n",
ncr_name(np));
pci_cfgwrite(config_id, PCIR_COMMAND, command, 2);
}
}
#endif /* PCIR_CACHELNSZ */
#endif /* SCSI_NCR_PCI_CONFIG_FIXUP */
/* Initialize per-target user settings */
usrsync = 0;
if (SCSI_NCR_DFLT_SYNC) {
usrsync = SCSI_NCR_DFLT_SYNC;
if (usrsync > np->maxsync)
usrsync = np->maxsync;
if (usrsync < np->minsync)
usrsync = np->minsync;
};
usrwide = (SCSI_NCR_MAX_WIDE);
if (usrwide > np->maxwide) usrwide=np->maxwide;
for (i=0;i<MAX_TARGET;i++) {
tcb_p tp = &np->target[i];
tp->tinfo.user.period = usrsync;
tp->tinfo.user.offset = usrsync != 0 ? np->maxoffs : 0;
tp->tinfo.user.width = usrwide;
tp->tinfo.disc_tag = NCR_CUR_DISCENB
| NCR_CUR_TAGENB
| NCR_USR_DISCENB
| NCR_USR_TAGENB;
}
/*
** Bells and whistles ;-)
*/
if (bootverbose)
printf("%s: minsync=%d, maxsync=%d, maxoffs=%d, %d dwords burst, %s dma fifo\n",
ncr_name(np), np->minsync, np->maxsync, np->maxoffs,
burst_length(np->maxburst),
(np->rv_ctest5 & DFS) ? "large" : "normal");
/*
** Print some complementary information that can be helpfull.
*/
if (bootverbose)
printf("%s: %s, %s IRQ driver%s\n",
ncr_name(np),
np->rv_stest2 & 0x20 ? "differential" : "single-ended",
np->rv_dcntl & IRQM ? "totem pole" : "open drain",
np->vaddr2 ? ", using on-chip SRAM" : "");
/*
** Patch scripts to physical addresses
*/
ncr_script_fill (&script0, &scripth0);
if (np->script)
np->p_script = vtophys(np->script);
np->p_scripth = vtophys(np->scripth);
ncr_script_copy_and_bind (np, (ncrcmd *) &script0,
(ncrcmd *) np->script, sizeof(struct script));
ncr_script_copy_and_bind (np, (ncrcmd *) &scripth0,
(ncrcmd *) np->scripth, sizeof(struct scripth));
/*
** Patch the script for LED support.
*/
if (np->features & FE_LED0) {
WRITESCRIPT(reselect[0], SCR_REG_REG(gpreg, SCR_OR, 0x01));
WRITESCRIPT(reselect1[0], SCR_REG_REG(gpreg, SCR_AND, 0xfe));
WRITESCRIPT(reselect2[0], SCR_REG_REG(gpreg, SCR_AND, 0xfe));
}
/*
** init data structure
*/
np->jump_tcb.l_cmd = SCR_JUMP;
np->jump_tcb.l_paddr = NCB_SCRIPTH_PHYS (np, abort);
/*
** Get SCSI addr of host adapter (set by bios?).
*/
np->myaddr = INB(nc_scid) & 0x07;
if (!np->myaddr) np->myaddr = SCSI_NCR_MYADDR;
#ifdef NCR_DUMP_REG
/*
** Log the initial register contents
*/
{
int reg;
for (reg=0; reg<256; reg+=4) {
if (reg%16==0) printf ("reg[%2x]", reg);
printf (" %08x", (int)pci_conf_read (config_id, reg));
if (reg%16==12) printf ("\n");
}
}
#endif /* NCR_DUMP_REG */
/*
** Reset chip.
*/
OUTB (nc_istat, SRST);
DELAY (1000);
OUTB (nc_istat, 0 );
/*
** Now check the cache handling of the pci chipset.
*/
if (ncr_snooptest (np)) {
printf ("CACHE INCORRECTLY CONFIGURED.\n");
return;
};
/*
** Install the interrupt handler.
*/
if (!pci_map_int (config_id, ncr_intr, np, &cam_imask))
printf ("\tinterruptless mode: reduced performance.\n");
/*
** Create the device queue. We only allow MAX_START-1 concurrent
** transactions so we can be sure to have one element free in our
** start queue to reset to the idle loop.
*/
devq = cam_simq_alloc(MAX_START - 1);
if (devq == NULL)
return;
/*
** Now tell the generic SCSI layer
** about our bus.
*/
np->sim = cam_sim_alloc(ncr_action, ncr_poll, "ncr", np, np->unit,
1, MAX_TAGS, devq);
if (np->sim == NULL) {
cam_simq_free(devq);
return;
}
if (xpt_bus_register(np->sim, 0) != CAM_SUCCESS) {
free(np->sim, M_DEVBUF);
return;
}
#ifdef __alpha__
alpha_register_pci_scsi(config_id->bus, config_id->slot, np->sim);
#endif
if (xpt_create_path(&np->path, /*periph*/NULL,
cam_sim_path(np->sim), CAM_TARGET_WILDCARD,
CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister(cam_sim_path(np->sim));
cam_sim_free(np->sim, /*free_simq*/TRUE);
free(np->sim, M_DEVBUF);
return;
}
/*
** start the timeout daemon
*/
ncr_timeout (np);
np->lasttime=0;
return;
}
/*==========================================================
**
**
** Process pending device interrupts.
**
**
**==========================================================
*/
static void
ncr_intr(vnp)
void *vnp;
{
ncb_p np = vnp;
int oldspl = splcam();
if (DEBUG_FLAGS & DEBUG_TINY) printf ("[");
if (INB(nc_istat) & (INTF|SIP|DIP)) {
/*
** Repeat until no outstanding ints
*/
do {
ncr_exception (np);
} while (INB(nc_istat) & (INTF|SIP|DIP));
np->ticks = 100;
};
if (DEBUG_FLAGS & DEBUG_TINY) printf ("]\n");
splx (oldspl);
}
/*==========================================================
**
**
** Start execution of a SCSI command.
** This is called from the generic SCSI driver.
**
**
**==========================================================
*/
static void
ncr_action (struct cam_sim *sim, union ccb *ccb)
{
ncb_p np;
np = (ncb_p) cam_sim_softc(sim);
switch (ccb->ccb_h.func_code) {
/* Common cases first */
case XPT_SCSI_IO: /* Execute the requested I/O operation */
{
nccb_p cp;
lcb_p lp;
tcb_p tp;
int oldspl;
struct ccb_scsiio *csio;
u_int8_t *msgptr;
u_int msglen;
u_int msglen2;
int segments;
u_int8_t nego;
u_int8_t idmsg;
u_int8_t qidx;
tp = &np->target[ccb->ccb_h.target_id];
csio = &ccb->csio;
oldspl = splcam();
/*
* Last time we need to check if this CCB needs to
* be aborted.
*/
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) {
xpt_done(ccb);
splx(oldspl);
return;
}
ccb->ccb_h.status |= CAM_SIM_QUEUED;
/*---------------------------------------------------
**
** Assign an nccb / bind ccb
**
**----------------------------------------------------
*/
cp = ncr_get_nccb (np, ccb->ccb_h.target_id,
ccb->ccb_h.target_lun);
if (cp == NULL) {
/* XXX JGibbs - Freeze SIMQ */
ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
xpt_done(ccb);
return;
};
cp->ccb = ccb;
/*---------------------------------------------------
**
** timestamp
**
**----------------------------------------------------
*/
/*
** XXX JGibbs - Isn't this expensive
** enough to be conditionalized??
*/
bzero (&cp->phys.header.stamp, sizeof (struct tstamp));
cp->phys.header.stamp.start = ticks;
nego = 0;
if (tp->nego_cp == NULL) {
if (tp->tinfo.current.width
!= tp->tinfo.goal.width) {
tp->nego_cp = cp;
nego = NS_WIDE;
} else if ((tp->tinfo.current.period
!= tp->tinfo.goal.period)
|| (tp->tinfo.current.offset
!= tp->tinfo.goal.offset)) {
tp->nego_cp = cp;
nego = NS_SYNC;
};
};
/*---------------------------------------------------
**
** choose a new tag ...
**
**----------------------------------------------------
*/
lp = tp->lp[ccb->ccb_h.target_lun];
if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0
&& (ccb->csio.tag_action != CAM_TAG_ACTION_NONE)
&& (nego == 0)) {
/*
** assign a tag to this nccb
*/
while (!cp->tag) {
nccb_p cp2 = lp->next_nccb;
lp->lasttag = lp->lasttag % 255 + 1;
while (cp2 && cp2->tag != lp->lasttag)
cp2 = cp2->next_nccb;
if (cp2) continue;
cp->tag=lp->lasttag;
if (DEBUG_FLAGS & DEBUG_TAGS) {
PRINT_ADDR(ccb);
printf ("using tag #%d.\n", cp->tag);
};
};
} else {
cp->tag=0;
};
/*----------------------------------------------------
**
** Build the identify / tag / sdtr message
**
**----------------------------------------------------
*/
idmsg = MSG_IDENTIFYFLAG | ccb->ccb_h.target_lun;
if (tp->tinfo.disc_tag & NCR_CUR_DISCENB)
idmsg |= MSG_IDENTIFY_DISCFLAG;
msgptr = cp->scsi_smsg;
msglen = 0;
msgptr[msglen++] = idmsg;
if (cp->tag) {
msgptr[msglen++] = ccb->csio.tag_action;
msgptr[msglen++] = cp->tag;
}
switch (nego) {
case NS_SYNC:
msgptr[msglen++] = MSG_EXTENDED;
msgptr[msglen++] = MSG_EXT_SDTR_LEN;
msgptr[msglen++] = MSG_EXT_SDTR;
msgptr[msglen++] = tp->tinfo.goal.period;
msgptr[msglen++] = tp->tinfo.goal.offset;;
if (DEBUG_FLAGS & DEBUG_NEGO) {
PRINT_ADDR(ccb);
printf ("sync msgout: ");
ncr_show_msg (&cp->scsi_smsg [msglen-5]);
printf (".\n");
};
break;
case NS_WIDE:
msgptr[msglen++] = MSG_EXTENDED;
msgptr[msglen++] = MSG_EXT_WDTR_LEN;
msgptr[msglen++] = MSG_EXT_WDTR;
msgptr[msglen++] = tp->tinfo.goal.width;
if (DEBUG_FLAGS & DEBUG_NEGO) {
PRINT_ADDR(ccb);
printf ("wide msgout: ");
ncr_show_msg (&cp->scsi_smsg [msglen-4]);
printf (".\n");
};
break;
};
/*----------------------------------------------------
**
** Build the identify message for getcc.
**
**----------------------------------------------------
*/
cp->scsi_smsg2 [0] = idmsg;
msglen2 = 1;
/*----------------------------------------------------
**
** Build the data descriptors
**
**----------------------------------------------------
*/
/* XXX JGibbs - Handle other types of I/O */
if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
segments = ncr_scatter(&cp->phys,
(vm_offset_t)csio->data_ptr,
(vm_size_t)csio->dxfer_len);
if (segments < 0) {
ccb->ccb_h.status = CAM_REQ_TOO_BIG;
ncr_free_nccb(np, cp);
splx(oldspl);
xpt_done(ccb);
return;
}
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
cp->phys.header.savep = NCB_SCRIPT_PHYS (np, data_in);
cp->phys.header.goalp = cp->phys.header.savep +20 +segments*16;
} else { /* CAM_DIR_OUT */
cp->phys.header.savep = NCB_SCRIPT_PHYS (np, data_out);
cp->phys.header.goalp = cp->phys.header.savep +20 +segments*16;
}
} else {
cp->phys.header.savep = NCB_SCRIPT_PHYS (np, no_data);
cp->phys.header.goalp = cp->phys.header.savep;
}
cp->phys.header.lastp = cp->phys.header.savep;
/*----------------------------------------------------
**
** fill in nccb
**
**----------------------------------------------------
**
**
** physical -> virtual backlink
** Generic SCSI command
*/
cp->phys.header.cp = cp;
/*
** Startqueue
*/
cp->phys.header.launch.l_paddr = NCB_SCRIPT_PHYS (np, select);
cp->phys.header.launch.l_cmd = SCR_JUMP;
/*
** select
*/
cp->phys.select.sel_id = ccb->ccb_h.target_id;
cp->phys.select.sel_scntl3 = tp->tinfo.wval;
cp->phys.select.sel_sxfer = tp->tinfo.sval;
/*
** message
*/
cp->phys.smsg.addr = CCB_PHYS (cp, scsi_smsg);
cp->phys.smsg.size = msglen;
cp->phys.smsg2.addr = CCB_PHYS (cp, scsi_smsg2);
cp->phys.smsg2.size = msglen2;
/*
** command
*/
/* XXX JGibbs - Support other command types */
cp->phys.cmd.addr = vtophys (csio->cdb_io.cdb_bytes);
cp->phys.cmd.size = csio->cdb_len;
/*
** sense command
*/
cp->phys.scmd.addr = CCB_PHYS (cp, sensecmd);
cp->phys.scmd.size = 6;
/*
** patch requested size into sense command
*/
cp->sensecmd[0] = 0x03;
cp->sensecmd[1] = ccb->ccb_h.target_lun << 5;
cp->sensecmd[4] = sizeof(struct scsi_sense_data);
cp->sensecmd[4] = csio->sense_len;
/*
** sense data
*/
cp->phys.sense.addr = vtophys (&csio->sense_data);
cp->phys.sense.size = csio->sense_len;
/*
** status
*/
cp->actualquirks = QUIRK_NOMSG;
cp->host_status = nego ? HS_NEGOTIATE : HS_BUSY;
cp->s_status = SCSI_STATUS_ILLEGAL;
cp->parity_status = 0;
cp->xerr_status = XE_OK;
cp->sync_status = tp->tinfo.sval;
cp->nego_status = nego;
cp->wide_status = tp->tinfo.wval;
/*----------------------------------------------------
**
** Critical region: start this job.
**
**----------------------------------------------------
*/
/*
** reselect pattern and activate this job.
*/
cp->jump_nccb.l_cmd = (SCR_JUMP ^ IFFALSE (DATA (cp->tag)));
cp->tlimit = time_second
+ ccb->ccb_h.timeout / 1000 + 2;
cp->magic = CCB_MAGIC;
/*
** insert into start queue.
*/
qidx = np->squeueput + 1;
if (qidx >= MAX_START) qidx=0;
np->squeue [qidx ] = NCB_SCRIPT_PHYS (np, idle);
np->squeue [np->squeueput] = CCB_PHYS (cp, phys);
np->squeueput = qidx;
if(DEBUG_FLAGS & DEBUG_QUEUE)
printf("%s: queuepos=%d tryoffset=%d.\n",
ncr_name (np), np->squeueput,
(unsigned)(READSCRIPT(startpos[0]) -
(NCB_SCRIPTH_PHYS (np, tryloop))));
/*
** Script processor may be waiting for reselect.
** Wake it up.
*/
OUTB (nc_istat, SIGP);
/*
** and reenable interrupts
*/
splx (oldspl);
break;
}
case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */
case XPT_EN_LUN: /* Enable LUN as a target */
case XPT_TARGET_IO: /* Execute target I/O request */
case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */
case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/
case XPT_ABORT: /* Abort the specified CCB */
/* XXX Implement */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
case XPT_SET_TRAN_SETTINGS:
{
struct ccb_trans_settings *cts;
tcb_p tp;
u_int update_type;
int s;
cts = &ccb->cts;
update_type = 0;
if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0)
update_type |= NCR_TRANS_GOAL;
if ((cts->flags & CCB_TRANS_USER_SETTINGS) != 0)
update_type |= NCR_TRANS_USER;
s = splcam();
tp = &np->target[ccb->ccb_h.target_id];
/* Tag and disc enables */
if ((cts->valid & CCB_TRANS_DISC_VALID) != 0) {
if (update_type & NCR_TRANS_GOAL) {
if ((cts->flags & CCB_TRANS_DISC_ENB) != 0)
tp->tinfo.disc_tag |= NCR_CUR_DISCENB;
else
tp->tinfo.disc_tag &= ~NCR_CUR_DISCENB;
}
if (update_type & NCR_TRANS_USER) {
if ((cts->flags & CCB_TRANS_DISC_ENB) != 0)
tp->tinfo.disc_tag |= NCR_USR_DISCENB;
else
tp->tinfo.disc_tag &= ~NCR_USR_DISCENB;
}
}
if ((cts->valid & CCB_TRANS_TQ_VALID) != 0) {
if (update_type & NCR_TRANS_GOAL) {
if ((cts->flags & CCB_TRANS_TAG_ENB) != 0)
tp->tinfo.disc_tag |= NCR_CUR_TAGENB;
else
tp->tinfo.disc_tag &= ~NCR_CUR_TAGENB;
}
if (update_type & NCR_TRANS_USER) {
if ((cts->flags & CCB_TRANS_TAG_ENB) != 0)
tp->tinfo.disc_tag |= NCR_USR_TAGENB;
else
tp->tinfo.disc_tag &= ~NCR_USR_TAGENB;
}
}
/* Filter bus width and sync negotiation settings */
if ((cts->valid & CCB_TRANS_BUS_WIDTH_VALID) != 0) {
if (cts->bus_width > np->maxwide)
cts->bus_width = np->maxwide;
}
if (((cts->valid & CCB_TRANS_SYNC_RATE_VALID) != 0)
|| ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) != 0)) {
if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) != 0) {
if (cts->sync_period != 0
&& (cts->sync_period < np->minsync))
cts->sync_period = np->minsync;
}
if ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) != 0) {
if (cts->sync_offset == 0)
cts->sync_period = 0;
if (cts->sync_offset > np->maxoffs)
cts->sync_offset = np->maxoffs;
}
}
if ((update_type & NCR_TRANS_USER) != 0) {
if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) != 0)
tp->tinfo.user.period = cts->sync_period;
if ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) != 0)
tp->tinfo.user.offset = cts->sync_offset;
if ((cts->valid & CCB_TRANS_BUS_WIDTH_VALID) != 0)
tp->tinfo.user.width = cts->bus_width;
}
if ((update_type & NCR_TRANS_GOAL) != 0) {
if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) != 0)
tp->tinfo.goal.period = cts->sync_period;
if ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) != 0)
tp->tinfo.goal.offset = cts->sync_offset;
if ((cts->valid & CCB_TRANS_BUS_WIDTH_VALID) != 0)
tp->tinfo.goal.width = cts->bus_width;
}
splx(s);
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_GET_TRAN_SETTINGS:
/* Get default/user set transfer settings for the target */
{
struct ccb_trans_settings *cts;
struct ncr_transinfo *tinfo;
tcb_p tp;
int s;
cts = &ccb->cts;
tp = &np->target[ccb->ccb_h.target_id];
s = splcam();
if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0) {
tinfo = &tp->tinfo.current;
if (tp->tinfo.disc_tag & NCR_CUR_DISCENB)
cts->flags |= CCB_TRANS_DISC_ENB;
else
cts->flags &= ~CCB_TRANS_DISC_ENB;
if (tp->tinfo.disc_tag & NCR_CUR_TAGENB)
cts->flags |= CCB_TRANS_TAG_ENB;
else
cts->flags &= ~CCB_TRANS_TAG_ENB;
} else {
tinfo = &tp->tinfo.user;
if (tp->tinfo.disc_tag & NCR_USR_DISCENB)
cts->flags |= CCB_TRANS_DISC_ENB;
else
cts->flags &= ~CCB_TRANS_DISC_ENB;
if (tp->tinfo.disc_tag & NCR_USR_TAGENB)
cts->flags |= CCB_TRANS_TAG_ENB;
else
cts->flags &= ~CCB_TRANS_TAG_ENB;
}
cts->sync_period = tinfo->period;
cts->sync_offset = tinfo->offset;
cts->bus_width = tinfo->width;
splx(s);
cts->valid = CCB_TRANS_SYNC_RATE_VALID
| CCB_TRANS_SYNC_OFFSET_VALID
| CCB_TRANS_BUS_WIDTH_VALID
| CCB_TRANS_DISC_VALID
| CCB_TRANS_TQ_VALID;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_CALC_GEOMETRY:
{
struct ccb_calc_geometry *ccg;
u_int32_t size_mb;
u_int32_t secs_per_cylinder;
int extended;
/* XXX JGibbs - I'm sure the NCR uses a different strategy,
* but it should be able to deal with Adaptec
* geometry too.
*/
extended = 1;
ccg = &ccb->ccg;
size_mb = ccg->volume_size
/ ((1024L * 1024L) / ccg->block_size);
if (size_mb > 1024 && extended) {
ccg->heads = 255;
ccg->secs_per_track = 63;
} else {
ccg->heads = 64;
ccg->secs_per_track = 32;
}
secs_per_cylinder = ccg->heads * ccg->secs_per_track;
ccg->cylinders = ccg->volume_size / secs_per_cylinder;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_RESET_BUS: /* Reset the specified SCSI bus */
{
OUTB (nc_scntl1, CRST);
ccb->ccb_h.status = CAM_REQ_CMP;
DELAY(10000); /* Wait until our interrupt handler sees it */
xpt_done(ccb);
break;
}
case XPT_TERM_IO: /* Terminate the I/O process */
/* XXX Implement */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi = &ccb->cpi;
cpi->version_num = 1; /* XXX??? */
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE;
if ((np->features & FE_WIDE) != 0)
cpi->hba_inquiry |= PI_WIDE_16;
cpi->target_sprt = 0;
cpi->hba_misc = 0;
cpi->hba_eng_cnt = 0;
cpi->max_target = (np->features & FE_WIDE) ? 15 : 7;
cpi->max_lun = MAX_LUN - 1;
cpi->initiator_id = np->myaddr;
cpi->bus_id = cam_sim_bus(sim);
cpi->base_transfer_speed = 3300;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "Symbios", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
/*==========================================================
**
**
** Complete execution of a SCSI command.
** Signal completion to the generic SCSI driver.
**
**
**==========================================================
*/
void
ncr_complete (ncb_p np, nccb_p cp)
{
union ccb *ccb;
tcb_p tp;
lcb_p lp;
/*
** Sanity check
*/
if (!cp || (cp->magic!=CCB_MAGIC) || !cp->ccb) return;
cp->magic = 1;
cp->tlimit= 0;
/*
** No Reselect anymore.
*/
cp->jump_nccb.l_cmd = (SCR_JUMP);
/*
** No starting.
*/
cp->phys.header.launch.l_paddr= NCB_SCRIPT_PHYS (np, idle);
/*
** timestamp
*/
ncb_profile (np, cp);
if (DEBUG_FLAGS & DEBUG_TINY)
printf ("CCB=%x STAT=%x/%x\n", (int)(intptr_t)cp & 0xfff,
cp->host_status,cp->s_status);
ccb = cp->ccb;
cp->ccb = NULL;
tp = &np->target[ccb->ccb_h.target_id];
lp = tp->lp[ccb->ccb_h.target_lun];
/*
** We do not queue more than 1 nccb per target
** with negotiation at any time. If this nccb was
** used for negotiation, clear this info in the tcb.
*/
if (cp == tp->nego_cp)
tp->nego_cp = NULL;
/*
** Check for parity errors.
*/
/* XXX JGibbs - What about reporting them??? */
if (cp->parity_status) {
PRINT_ADDR(ccb);
printf ("%d parity error(s), fallback.\n", cp->parity_status);
/*
** fallback to asynch transfer.
*/
tp->tinfo.goal.period = 0;
tp->tinfo.goal.offset = 0;
};
/*
** Check for extended errors.
*/
if (cp->xerr_status != XE_OK) {
PRINT_ADDR(ccb);
switch (cp->xerr_status) {
case XE_EXTRA_DATA:
printf ("extraneous data discarded.\n");
break;
case XE_BAD_PHASE:
printf ("illegal scsi phase (4/5).\n");
break;
default:
printf ("extended error %d.\n", cp->xerr_status);
break;
};
if (cp->host_status==HS_COMPLETE)
cp->host_status = HS_FAIL;
};
/*
** Check the status.
*/
if (cp->host_status == HS_COMPLETE) {
if (cp->s_status == SCSI_STATUS_OK) {
/*
** All went well.
*/
/* XXX JGibbs - Properly calculate residual */
tp->bytes += ccb->csio.dxfer_len;
tp->transfers ++;
ccb->ccb_h.status = CAM_REQ_CMP;
} else if ((cp->s_status & SCSI_STATUS_SENSE) != 0) {
/*
* XXX Could be TERMIO too. Should record
* original status.
*/
ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
cp->s_status &= ~SCSI_STATUS_SENSE;
if (cp->s_status == SCSI_STATUS_OK) {
ccb->ccb_h.status =
CAM_AUTOSNS_VALID|CAM_SCSI_STATUS_ERROR;
} else {
ccb->ccb_h.status = CAM_AUTOSENSE_FAIL;
}
} else {
ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR;
ccb->csio.scsi_status = cp->s_status;
}
} else if (cp->host_status == HS_SEL_TIMEOUT) {
/*
** Device failed selection
*/
ccb->ccb_h.status = CAM_SEL_TIMEOUT;
} else if (cp->host_status == HS_TIMEOUT) {
/*
** No response
*/
ccb->ccb_h.status = CAM_CMD_TIMEOUT;
} else if (cp->host_status == HS_STALL) {
ccb->ccb_h.status = CAM_REQUEUE_REQ;
} else {
/*
** Other protocol messes
*/
PRINT_ADDR(ccb);
printf ("COMMAND FAILED (%x %x) @%p.\n",
cp->host_status, cp->s_status, cp);
ccb->ccb_h.status = CAM_CMD_TIMEOUT;
}
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
xpt_freeze_devq(ccb->ccb_h.path, /*count*/1);
ccb->ccb_h.status |= CAM_DEV_QFRZN;
}
/*
** Free this nccb
*/
ncr_free_nccb (np, cp);
/*
** signal completion to generic driver.
*/
xpt_done (ccb);
}
/*==========================================================
**
**
** Signal all (or one) control block done.
**
**
**==========================================================
*/
void
ncr_wakeup (ncb_p np, u_long code)
{
/*
** Starting at the default nccb and following
** the links, complete all jobs with a
** host_status greater than "disconnect".
**
** If the "code" parameter is not zero,
** complete all jobs that are not IDLE.
*/
nccb_p cp = np->link_nccb;
while (cp) {
switch (cp->host_status) {
case HS_IDLE:
break;
case HS_DISCONNECT:
if(DEBUG_FLAGS & DEBUG_TINY) printf ("D");
/* fall through */
case HS_BUSY:
case HS_NEGOTIATE:
if (!code) break;
cp->host_status = code;
/* fall through */
default:
ncr_complete (np, cp);
break;
};
cp = cp -> link_nccb;
};
}
static void
ncr_freeze_devq (ncb_p np, struct cam_path *path)
{
nccb_p cp;
int i;
int count;
int firstskip;
/*
** Starting at the first nccb and following
** the links, complete all jobs that match
** the passed in path and are in the start queue.
*/
cp = np->link_nccb;
count = 0;
firstskip = 0;
while (cp) {
switch (cp->host_status) {
case HS_BUSY:
case HS_NEGOTIATE:
if ((cp->phys.header.launch.l_paddr
== NCB_SCRIPT_PHYS (np, select))
&& (xpt_path_comp(path, cp->ccb->ccb_h.path) >= 0)) {
/* Mark for removal from the start queue */
for (i = 1; i < MAX_START; i++) {
int idx;
idx = np->squeueput - i;
if (idx < 0)
idx = MAX_START + idx;
if (np->squeue[idx]
== CCB_PHYS(cp, phys)) {
np->squeue[idx] =
NCB_SCRIPT_PHYS (np, skip);
if (i > firstskip)
firstskip = i;
break;
}
}
cp->host_status=HS_STALL;
ncr_complete (np, cp);
count++;
}
break;
default:
break;
}
cp = cp->link_nccb;
}
if (count > 0) {
int j;
int bidx;
/* Compress the start queue */
j = 0;
bidx = np->squeueput;
i = np->squeueput - firstskip;
if (i < 0)
i = MAX_START + i;
for (;;) {
bidx = i - j;
if (bidx < 0)
bidx = MAX_START + bidx;
if (np->squeue[i] == NCB_SCRIPT_PHYS (np, skip)) {
j++;
} else if (j != 0) {
np->squeue[bidx] = np->squeue[i];
if (np->squeue[bidx]
== NCB_SCRIPT_PHYS(np, idle))
break;
}
i = (i + 1) % MAX_START;
}
np->squeueput = bidx;
}
}
/*==========================================================
**
**
** Start NCR chip.
**
**
**==========================================================
*/
void
ncr_init(ncb_p np, char * msg, u_long code)
{
int i;
/*
** Reset chip.
*/
OUTB (nc_istat, SRST);
DELAY (1000);
OUTB (nc_istat, 0);
/*
** Message.
*/
if (msg) printf ("%s: restart (%s).\n", ncr_name (np), msg);
/*
** Clear Start Queue
*/
for (i=0;i<MAX_START;i++)
np -> squeue [i] = NCB_SCRIPT_PHYS (np, idle);
/*
** Start at first entry.
*/
np->squeueput = 0;
WRITESCRIPT(startpos[0], NCB_SCRIPTH_PHYS (np, tryloop));
WRITESCRIPT(start0 [0], SCR_INT ^ IFFALSE (0));
/*
** Wakeup all pending jobs.
*/
ncr_wakeup (np, code);
/*
** Init chip.
*/
OUTB (nc_istat, 0x00 ); /* Remove Reset, abort ... */
OUTB (nc_scntl0, 0xca ); /* full arb., ena parity, par->ATN */
OUTB (nc_scntl1, 0x00 ); /* odd parity, and remove CRST!! */
ncr_selectclock(np, np->rv_scntl3); /* Select SCSI clock */
OUTB (nc_scid , RRE|np->myaddr);/* host adapter SCSI address */
OUTW (nc_respid, 1ul<<np->myaddr);/* id to respond to */
OUTB (nc_istat , SIGP ); /* Signal Process */
OUTB (nc_dmode , np->rv_dmode); /* XXX modify burstlen ??? */
OUTB (nc_dcntl , np->rv_dcntl);
OUTB (nc_ctest3, np->rv_ctest3);
OUTB (nc_ctest5, np->rv_ctest5);
OUTB (nc_ctest4, np->rv_ctest4);/* enable master parity checking */
OUTB (nc_stest2, np->rv_stest2|EXT); /* Extended Sreq/Sack filtering */
OUTB (nc_stest3, TE ); /* TolerANT enable */
OUTB (nc_stime0, 0x0b ); /* HTH = disabled, STO = 0.1 sec. */
if (bootverbose >= 2) {
printf ("\tACTUAL values:SCNTL3:%02x DMODE:%02x DCNTL:%02x\n",
np->rv_scntl3, np->rv_dmode, np->rv_dcntl);
printf ("\t CTEST3:%02x CTEST4:%02x CTEST5:%02x\n",
np->rv_ctest3, np->rv_ctest4, np->rv_ctest5);
}
/*
** Enable GPIO0 pin for writing if LED support.
*/
if (np->features & FE_LED0) {
OUTOFFB (nc_gpcntl, 0x01);
}
/*
** Fill in target structure.
*/
for (i=0;i<MAX_TARGET;i++) {
tcb_p tp = &np->target[i];
tp->tinfo.sval = 0;
tp->tinfo.wval = np->rv_scntl3;
tp->tinfo.current.period = 0;
tp->tinfo.current.offset = 0;
tp->tinfo.current.width = MSG_EXT_WDTR_BUS_8_BIT;
}
/*
** enable ints
*/
OUTW (nc_sien , STO|HTH|MA|SGE|UDC|RST);
OUTB (nc_dien , MDPE|BF|ABRT|SSI|SIR|IID);
/*
** Start script processor.
*/
OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, start));
/*
* Notify the XPT of the event
*/
if (code == HS_RESET)
xpt_async(AC_BUS_RESET, np->path, NULL);
}
static void
ncr_poll(struct cam_sim *sim)
{
ncr_intr(cam_sim_softc(sim));
}
/*==========================================================
**
** Get clock factor and sync divisor for a given
** synchronous factor period.
** Returns the clock factor (in sxfer) and scntl3
** synchronous divisor field.
**
**==========================================================
*/
static void ncr_getsync(ncb_p np, u_char sfac, u_char *fakp, u_char *scntl3p)
{
u_long clk = np->clock_khz; /* SCSI clock frequency in kHz */
int div = np->clock_divn; /* Number of divisors supported */
u_long fak; /* Sync factor in sxfer */
u_long per; /* Period in tenths of ns */
u_long kpc; /* (per * clk) */
/*
** Compute the synchronous period in tenths of nano-seconds
*/
if (sfac <= 10) per = 250;
else if (sfac == 11) per = 303;
else if (sfac == 12) per = 500;
else per = 40 * sfac;
/*
** Look for the greatest clock divisor that allows an
** input speed faster than the period.
*/
kpc = per * clk;
while (--div >= 0)
if (kpc >= (div_10M[div] * 4)) break;
/*
** Calculate the lowest clock factor that allows an output
** speed not faster than the period.
*/
fak = (kpc - 1) / div_10M[div] + 1;
#if 0 /* You can #if 1 if you think this optimization is usefull */
per = (fak * div_10M[div]) / clk;
/*
** Why not to try the immediate lower divisor and to choose
** the one that allows the fastest output speed ?
** We dont want input speed too much greater than output speed.
*/
if (div >= 1 && fak < 6) {
u_long fak2, per2;
fak2 = (kpc - 1) / div_10M[div-1] + 1;
per2 = (fak2 * div_10M[div-1]) / clk;
if (per2 < per && fak2 <= 6) {
fak = fak2;
per = per2;
--div;
}
}
#endif
if (fak < 4) fak = 4; /* Should never happen, too bad ... */
/*
** Compute and return sync parameters for the ncr
*/
*fakp = fak - 4;
*scntl3p = ((div+1) << 4) + (sfac < 25 ? 0x80 : 0);
}
/*==========================================================
**
** Switch sync mode for current job and its target
**
**==========================================================
*/
static void
ncr_setsync(ncb_p np, nccb_p cp, u_char scntl3, u_char sxfer, u_char period)
{
union ccb *ccb;
struct ccb_trans_settings neg;
tcb_p tp;
int div;
u_int target = INB (nc_ctest0) & 0x0f;
u_int period_10ns;
assert (cp);
if (!cp) return;
ccb = cp->ccb;
assert (ccb);
if (!ccb) return;
assert (target == ccb->ccb_h.target_id);
tp = &np->target[target];
if (!scntl3 || !(sxfer & 0x1f))
scntl3 = np->rv_scntl3;
scntl3 = (scntl3 & 0xf0) | (tp->tinfo.wval & EWS)
| (np->rv_scntl3 & 0x07);
/*
** Deduce the value of controller sync period from scntl3.
** period is in tenths of nano-seconds.
*/
div = ((scntl3 >> 4) & 0x7);
if ((sxfer & 0x1f) && div)
period_10ns =
(((sxfer>>5)+4)*div_10M[div-1])/np->clock_khz;
else
period_10ns = 0;
tp->tinfo.goal.period = period;
tp->tinfo.goal.offset = sxfer & 0x1f;
tp->tinfo.current.period = period;
tp->tinfo.current.offset = sxfer & 0x1f;
/*
** Stop there if sync parameters are unchanged
*/
if (tp->tinfo.sval == sxfer && tp->tinfo.wval == scntl3) return;
tp->tinfo.sval = sxfer;
tp->tinfo.wval = scntl3;
if (sxfer & 0x1f) {
/*
** Disable extended Sreq/Sack filtering
*/
if (period_10ns <= 2000) OUTOFFB (nc_stest2, EXT);
}
/*
** Tell the SCSI layer about the
** new transfer parameters.
*/
neg.sync_period = period;
neg.sync_offset = sxfer & 0x1f;
neg.valid = CCB_TRANS_SYNC_RATE_VALID
| CCB_TRANS_SYNC_OFFSET_VALID;
xpt_setup_ccb(&neg.ccb_h, ccb->ccb_h.path,
/*priority*/1);
xpt_async(AC_TRANSFER_NEG, ccb->ccb_h.path, &neg);
/*
** set actual value and sync_status
*/
OUTB (nc_sxfer, sxfer);
np->sync_st = sxfer;
OUTB (nc_scntl3, scntl3);
np->wide_st = scntl3;
/*
** patch ALL nccbs of this target.
*/
for (cp = np->link_nccb; cp; cp = cp->link_nccb) {
if (!cp->ccb) continue;
if (cp->ccb->ccb_h.target_id != target) continue;
cp->sync_status = sxfer;
cp->wide_status = scntl3;
};
}
/*==========================================================
**
** Switch wide mode for current job and its target
** SCSI specs say: a SCSI device that accepts a WDTR
** message shall reset the synchronous agreement to
** asynchronous mode.
**
**==========================================================
*/
static void ncr_setwide (ncb_p np, nccb_p cp, u_char wide, u_char ack)
{
union ccb *ccb;
struct ccb_trans_settings neg;
u_int target = INB (nc_ctest0) & 0x0f;
tcb_p tp;
u_char scntl3;
u_char sxfer;
assert (cp);
if (!cp) return;
ccb = cp->ccb;
assert (ccb);
if (!ccb) return;
assert (target == ccb->ccb_h.target_id);
tp = &np->target[target];
tp->tinfo.current.width = wide;
tp->tinfo.goal.width = wide;
tp->tinfo.current.period = 0;
tp->tinfo.current.offset = 0;
scntl3 = (tp->tinfo.wval & (~EWS)) | (wide ? EWS : 0);
sxfer = ack ? 0 : tp->tinfo.sval;
/*
** Stop there if sync/wide parameters are unchanged
*/
if (tp->tinfo.sval == sxfer && tp->tinfo.wval == scntl3) return;
tp->tinfo.sval = sxfer;
tp->tinfo.wval = scntl3;
/* Tell the SCSI layer about the new transfer params */
neg.bus_width = (scntl3 & EWS) ? MSG_EXT_WDTR_BUS_16_BIT
: MSG_EXT_WDTR_BUS_8_BIT;
neg.sync_period = 0;
neg.sync_offset = 0;
neg.valid = CCB_TRANS_BUS_WIDTH_VALID
| CCB_TRANS_SYNC_RATE_VALID
| CCB_TRANS_SYNC_OFFSET_VALID;
xpt_setup_ccb(&neg.ccb_h, ccb->ccb_h.path,
/*priority*/1);
xpt_async(AC_TRANSFER_NEG, ccb->ccb_h.path, &neg);
/*
** set actual value and sync_status
*/
OUTB (nc_sxfer, sxfer);
np->sync_st = sxfer;
OUTB (nc_scntl3, scntl3);
np->wide_st = scntl3;
/*
** patch ALL nccbs of this target.
*/
for (cp = np->link_nccb; cp; cp = cp->link_nccb) {
if (!cp->ccb) continue;
if (cp->ccb->ccb_h.target_id != target) continue;
cp->sync_status = sxfer;
cp->wide_status = scntl3;
};
}
/*==========================================================
**
**
** ncr timeout handler.
**
**
**==========================================================
**
** Misused to keep the driver running when
** interrupts are not configured correctly.
**
**----------------------------------------------------------
*/
static void
ncr_timeout (void *arg)
{
ncb_p np = arg;
time_t thistime = time_second;
ticks_t step = np->ticks;
u_long count = 0;
long signed t;
nccb_p cp;
if (np->lasttime != thistime) {
/*
** block ncr interrupts
*/
int oldspl = splcam();
np->lasttime = thistime;
/*----------------------------------------------------
**
** handle ncr chip timeouts
**
** Assumption:
** We have a chance to arbitrate for the
** SCSI bus at least every 10 seconds.
**
**----------------------------------------------------
*/
t = thistime - np->heartbeat;
if (t<2) np->latetime=0; else np->latetime++;
if (np->latetime>2) {
/*
** If there are no requests, the script
** processor will sleep on SEL_WAIT_RESEL.
** But we have to check whether it died.
** Let's try to wake it up.
*/
OUTB (nc_istat, SIGP);
};
/*----------------------------------------------------
**
** handle nccb timeouts
**
**----------------------------------------------------
*/
for (cp=np->link_nccb; cp; cp=cp->link_nccb) {
/*
** look for timed out nccbs.
*/
if (!cp->host_status) continue;
count++;
if (cp->tlimit > thistime) continue;
/*
** Disable reselect.
** Remove it from startqueue.
*/
cp->jump_nccb.l_cmd = (SCR_JUMP);
if (cp->phys.header.launch.l_paddr ==
NCB_SCRIPT_PHYS (np, select)) {
printf ("%s: timeout nccb=%p (skip)\n",
ncr_name (np), cp);
cp->phys.header.launch.l_paddr
= NCB_SCRIPT_PHYS (np, skip);
};
switch (cp->host_status) {
case HS_BUSY:
case HS_NEGOTIATE:
/* fall through */
case HS_DISCONNECT:
cp->host_status=HS_TIMEOUT;
};
cp->tag = 0;
/*
** wakeup this nccb.
*/
ncr_complete (np, cp);
};
splx (oldspl);
}
np->timeout_ch =
timeout (ncr_timeout, (caddr_t) np, step ? step : 1);
if (INB(nc_istat) & (INTF|SIP|DIP)) {
/*
** Process pending interrupts.
*/
int oldspl = splcam();
if (DEBUG_FLAGS & DEBUG_TINY) printf ("{");
ncr_exception (np);
if (DEBUG_FLAGS & DEBUG_TINY) printf ("}");
splx (oldspl);
};
}
/*==========================================================
**
** log message for real hard errors
**
** "ncr0 targ 0?: ERROR (ds:si) (so-si-sd) (sxfer/scntl3) @ name (dsp:dbc)."
** " reg: r0 r1 r2 r3 r4 r5 r6 ..... rf."
**
** exception register:
** ds: dstat
** si: sist
**
** SCSI bus lines:
** so: control lines as driver by NCR.
** si: control lines as seen by NCR.
** sd: scsi data lines as seen by NCR.
**
** wide/fastmode:
** sxfer: (see the manual)
** scntl3: (see the manual)
**
** current script command:
** dsp: script adress (relative to start of script).
** dbc: first word of script command.
**
** First 16 register of the chip:
** r0..rf
**
**==========================================================
*/
static void ncr_log_hard_error(ncb_p np, u_short sist, u_char dstat)
{
u_int32_t dsp;
int script_ofs;
int script_size;
char *script_name;
u_char *script_base;
int i;
dsp = INL (nc_dsp);
if (np->p_script < dsp &&
dsp <= np->p_script + sizeof(struct script)) {
script_ofs = dsp - np->p_script;
script_size = sizeof(struct script);
script_base = (u_char *) np->script;
script_name = "script";
}
else if (np->p_scripth < dsp &&
dsp <= np->p_scripth + sizeof(struct scripth)) {
script_ofs = dsp - np->p_scripth;
script_size = sizeof(struct scripth);
script_base = (u_char *) np->scripth;
script_name = "scripth";
} else {
script_ofs = dsp;
script_size = 0;
script_base = 0;
script_name = "mem";
}
printf ("%s:%d: ERROR (%x:%x) (%x-%x-%x) (%x/%x) @ (%s %x:%08x).\n",
ncr_name (np), (unsigned)INB (nc_ctest0)&0x0f, dstat, sist,
(unsigned)INB (nc_socl), (unsigned)INB (nc_sbcl), (unsigned)INB (nc_sbdl),
(unsigned)INB (nc_sxfer),(unsigned)INB (nc_scntl3), script_name, script_ofs,
(unsigned)INL (nc_dbc));
if (((script_ofs & 3) == 0) &&
(unsigned)script_ofs < script_size) {
printf ("%s: script cmd = %08x\n", ncr_name(np),
(int)READSCRIPT_OFF(script_base, script_ofs));
}
printf ("%s: regdump:", ncr_name(np));
for (i=0; i<16;i++)
printf (" %02x", (unsigned)INB_OFF(i));
printf (".\n");
}
/*==========================================================
**
**
** ncr chip exception handler.
**
**
**==========================================================
*/
void ncr_exception (ncb_p np)
{
u_char istat, dstat;
u_short sist;
/*
** interrupt on the fly ?
*/
while ((istat = INB (nc_istat)) & INTF) {
if (DEBUG_FLAGS & DEBUG_TINY) printf ("F ");
OUTB (nc_istat, INTF);
np->profile.num_fly++;
ncr_wakeup (np, 0);
};
if (!(istat & (SIP|DIP))) {
return;
}
/*
** Steinbach's Guideline for Systems Programming:
** Never test for an error condition you don't know how to handle.
*/
sist = (istat & SIP) ? INW (nc_sist) : 0;
dstat = (istat & DIP) ? INB (nc_dstat) : 0;
np->profile.num_int++;
if (DEBUG_FLAGS & DEBUG_TINY)
printf ("<%d|%x:%x|%x:%x>",
INB(nc_scr0),
dstat,sist,
(unsigned)INL(nc_dsp),
(unsigned)INL(nc_dbc));
if ((dstat==DFE) && (sist==PAR)) return;
/*==========================================================
**
** First the normal cases.
**
**==========================================================
*/
/*-------------------------------------------
** SCSI reset
**-------------------------------------------
*/
if (sist & RST) {
ncr_init (np, bootverbose ? "scsi reset" : NULL, HS_RESET);
return;
};
/*-------------------------------------------
** selection timeout
**
** IID excluded from dstat mask!
** (chip bug)
**-------------------------------------------
*/
if ((sist & STO) &&
!(sist & (GEN|HTH|MA|SGE|UDC|RST|PAR)) &&
!(dstat & (MDPE|BF|ABRT|SIR))) {
ncr_int_sto (np);
return;
};
/*-------------------------------------------
** Phase mismatch.
**-------------------------------------------
*/
if ((sist & MA) &&
!(sist & (STO|GEN|HTH|SGE|UDC|RST|PAR)) &&
!(dstat & (MDPE|BF|ABRT|SIR|IID))) {
ncr_int_ma (np, dstat);
return;
};
/*----------------------------------------
** move command with length 0
**----------------------------------------
*/
if ((dstat & IID) &&
!(sist & (STO|GEN|HTH|MA|SGE|UDC|RST|PAR)) &&
!(dstat & (MDPE|BF|ABRT|SIR)) &&
((INL(nc_dbc) & 0xf8000000) == SCR_MOVE_TBL)) {
/*
** Target wants more data than available.
** The "no_data" script will do it.
*/
OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, no_data));
return;
};
/*-------------------------------------------
** Programmed interrupt
**-------------------------------------------
*/
if ((dstat & SIR) &&
!(sist & (STO|GEN|HTH|MA|SGE|UDC|RST|PAR)) &&
!(dstat & (MDPE|BF|ABRT|IID)) &&
(INB(nc_dsps) <= SIR_MAX)) {
ncr_int_sir (np);
return;
};
/*========================================
** log message for real hard errors
**========================================
*/
ncr_log_hard_error(np, sist, dstat);
/*========================================
** do the register dump
**========================================
*/
if (time_second - np->regtime > 10) {
int i;
np->regtime = time_second;
for (i=0; i<sizeof(np->regdump); i++)
((volatile char*)&np->regdump)[i] = INB_OFF(i);
np->regdump.nc_dstat = dstat;
np->regdump.nc_sist = sist;
};
/*----------------------------------------
** clean up the dma fifo
**----------------------------------------
*/
if ( (INB(nc_sstat0) & (ILF|ORF|OLF) ) ||
(INB(nc_sstat1) & (FF3210) ) ||
(INB(nc_sstat2) & (ILF1|ORF1|OLF1)) || /* wide .. */
!(dstat & DFE)) {
printf ("%s: have to clear fifos.\n", ncr_name (np));
OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */
OUTB (nc_ctest3, np->rv_ctest3 | CLF);
/* clear dma fifo */
}
/*----------------------------------------
** handshake timeout
**----------------------------------------
*/
if (sist & HTH) {
printf ("%s: handshake timeout\n", ncr_name(np));
OUTB (nc_scntl1, CRST);
DELAY (1000);
OUTB (nc_scntl1, 0x00);
OUTB (nc_scr0, HS_FAIL);
OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, cleanup));
return;
}
/*----------------------------------------
** unexpected disconnect
**----------------------------------------
*/
if ((sist & UDC) &&
!(sist & (STO|GEN|HTH|MA|SGE|RST|PAR)) &&
!(dstat & (MDPE|BF|ABRT|SIR|IID))) {
OUTB (nc_scr0, HS_UNEXPECTED);
OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, cleanup));
return;
};
/*----------------------------------------
** cannot disconnect
**----------------------------------------
*/
if ((dstat & IID) &&
!(sist & (STO|GEN|HTH|MA|SGE|UDC|RST|PAR)) &&
!(dstat & (MDPE|BF|ABRT|SIR)) &&
((INL(nc_dbc) & 0xf8000000) == SCR_WAIT_DISC)) {
/*
** Unexpected data cycle while waiting for disconnect.
*/
if (INB(nc_sstat2) & LDSC) {
/*
** It's an early reconnect.
** Let's continue ...
*/
OUTB (nc_dcntl, np->rv_dcntl | STD);
/*
** info message
*/
printf ("%s: INFO: LDSC while IID.\n",
ncr_name (np));
return;
};
printf ("%s: target %d doesn't release the bus.\n",
ncr_name (np), INB (nc_ctest0)&0x0f);
/*
** return without restarting the NCR.
** timeout will do the real work.
*/
return;
};
/*----------------------------------------
** single step
**----------------------------------------
*/
if ((dstat & SSI) &&
!(sist & (STO|GEN|HTH|MA|SGE|UDC|RST|PAR)) &&
!(dstat & (MDPE|BF|ABRT|SIR|IID))) {
OUTB (nc_dcntl, np->rv_dcntl | STD);
return;
};
/*
** @RECOVER@ HTH, SGE, ABRT.
**
** We should try to recover from these interrupts.
** They may occur if there are problems with synch transfers, or
** if targets are switched on or off while the driver is running.
*/
if (sist & SGE) {
/* clear scsi offsets */
OUTB (nc_ctest3, np->rv_ctest3 | CLF);
}
/*
** Freeze controller to be able to read the messages.
*/
if (DEBUG_FLAGS & DEBUG_FREEZE) {
int i;
unsigned char val;
for (i=0; i<0x60; i++) {
switch (i%16) {
case 0:
printf ("%s: reg[%d0]: ",
ncr_name(np),i/16);
break;
case 4:
case 8:
case 12:
printf (" ");
break;
};
val = ((unsigned char*) np->vaddr) [i];
printf (" %x%x", val/16, val%16);
if (i%16==15) printf (".\n");
};
untimeout (ncr_timeout, (caddr_t) np, np->timeout_ch);
printf ("%s: halted!\n", ncr_name(np));
/*
** don't restart controller ...
*/
OUTB (nc_istat, SRST);
return;
};
#ifdef NCR_FREEZE
/*
** Freeze system to be able to read the messages.
*/
printf ("ncr: fatal error: system halted - press reset to reboot ...");
(void) splhigh();
for (;;);
#endif
/*
** sorry, have to kill ALL jobs ...
*/
ncr_init (np, "fatal error", HS_FAIL);
}
/*==========================================================
**
** ncr chip exception handler for selection timeout
**
**==========================================================
**
** There seems to be a bug in the 53c810.
** Although a STO-Interrupt is pending,
** it continues executing script commands.
** But it will fail and interrupt (IID) on
** the next instruction where it's looking
** for a valid phase.
**
**----------------------------------------------------------
*/
void ncr_int_sto (ncb_p np)
{
u_long dsa, scratcha, diff;
nccb_p cp;
if (DEBUG_FLAGS & DEBUG_TINY) printf ("T");
/*
** look for nccb and set the status.
*/
dsa = INL (nc_dsa);
cp = np->link_nccb;
while (cp && (CCB_PHYS (cp, phys) != dsa))
cp = cp->link_nccb;
if (cp) {
cp-> host_status = HS_SEL_TIMEOUT;
ncr_complete (np, cp);
};
/*
** repair start queue
*/
scratcha = INL (nc_scratcha);
diff = scratcha - NCB_SCRIPTH_PHYS (np, tryloop);
/* assert ((diff <= MAX_START * 20) && !(diff % 20));*/
if ((diff <= MAX_START * 20) && !(diff % 20)) {
WRITESCRIPT(startpos[0], scratcha);
OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, start));
return;
};
ncr_init (np, "selection timeout", HS_FAIL);
}
/*==========================================================
**
**
** ncr chip exception handler for phase errors.
**
**
**==========================================================
**
** We have to construct a new transfer descriptor,
** to transfer the rest of the current block.
**
**----------------------------------------------------------
*/
static void ncr_int_ma (ncb_p np, u_char dstat)
{
u_int32_t dbc;
u_int32_t rest;
u_int32_t dsa;
u_int32_t dsp;
u_int32_t nxtdsp;
volatile void *vdsp_base;
size_t vdsp_off;
u_int32_t oadr, olen;
u_int32_t *tblp, *newcmd;
u_char cmd, sbcl, ss0, ss2, ctest5;
u_short delta;
nccb_p cp;
dsp = INL (nc_dsp);
dsa = INL (nc_dsa);
dbc = INL (nc_dbc);
ss0 = INB (nc_sstat0);
ss2 = INB (nc_sstat2);
sbcl= INB (nc_sbcl);
cmd = dbc >> 24;
rest= dbc & 0xffffff;
ctest5 = (np->rv_ctest5 & DFS) ? INB (nc_ctest5) : 0;
if (ctest5 & DFS)
delta=(((ctest5<<8) | (INB (nc_dfifo) & 0xff)) - rest) & 0x3ff;
else
delta=(INB (nc_dfifo) - rest) & 0x7f;
/*
** The data in the dma fifo has not been transfered to
** the target -> add the amount to the rest
** and clear the data.
** Check the sstat2 register in case of wide transfer.
*/
if (!(dstat & DFE)) rest += delta;
if (ss0 & OLF) rest++;
if (ss0 & ORF) rest++;
if (INB(nc_scntl3) & EWS) {
if (ss2 & OLF1) rest++;
if (ss2 & ORF1) rest++;
};
OUTB (nc_ctest3, np->rv_ctest3 | CLF); /* clear dma fifo */
OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */
/*
** locate matching cp
*/
cp = np->link_nccb;
while (cp && (CCB_PHYS (cp, phys) != dsa))
cp = cp->link_nccb;
if (!cp) {
printf ("%s: SCSI phase error fixup: CCB already dequeued (%p)\n",
ncr_name (np), (void *) np->header.cp);
return;
}
if (cp != np->header.cp) {
printf ("%s: SCSI phase error fixup: CCB address mismatch "
"(%p != %p) np->nccb = %p\n",
ncr_name (np), (void *)cp, (void *)np->header.cp,
(void *)np->link_nccb);
/* return;*/
}
/*
** find the interrupted script command,
** and the address at which to continue.
*/
if (dsp == vtophys (&cp->patch[2])) {
vdsp_base = cp;
vdsp_off = offsetof(struct nccb, patch[0]);
nxtdsp = READSCRIPT_OFF(vdsp_base, vdsp_off + 3*4);
} else if (dsp == vtophys (&cp->patch[6])) {
vdsp_base = cp;
vdsp_off = offsetof(struct nccb, patch[4]);
nxtdsp = READSCRIPT_OFF(vdsp_base, vdsp_off + 3*4);
} else if (dsp > np->p_script &&
dsp <= np->p_script + sizeof(struct script)) {
vdsp_base = np->script;
vdsp_off = dsp - np->p_script - 8;
nxtdsp = dsp;
} else {
vdsp_base = np->scripth;
vdsp_off = dsp - np->p_scripth - 8;
nxtdsp = dsp;
};
/*
** log the information
*/
if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_PHASE)) {
printf ("P%x%x ",cmd&7, sbcl&7);
printf ("RL=%d D=%d SS0=%x ",
(unsigned) rest, (unsigned) delta, ss0);
};
if (DEBUG_FLAGS & DEBUG_PHASE) {
printf ("\nCP=%p CP2=%p DSP=%x NXT=%x VDSP=%p CMD=%x ",
cp, np->header.cp,
dsp,
nxtdsp, (char*)vdsp_base+vdsp_off, cmd);
};
/*
** get old startaddress and old length.
*/
oadr = READSCRIPT_OFF(vdsp_base, vdsp_off + 1*4);
if (cmd & 0x10) { /* Table indirect */
tblp = (u_int32_t *) ((char*) &cp->phys + oadr);
olen = tblp[0];
oadr = tblp[1];
} else {
tblp = (u_int32_t *) 0;
olen = READSCRIPT_OFF(vdsp_base, vdsp_off) & 0xffffff;
};
if (DEBUG_FLAGS & DEBUG_PHASE) {
printf ("OCMD=%x\nTBLP=%p OLEN=%lx OADR=%lx\n",
(unsigned) (READSCRIPT_OFF(vdsp_base, vdsp_off) >> 24),
(void *) tblp,
(u_long) olen,
(u_long) oadr);
};
/*
** if old phase not dataphase, leave here.
*/
if (cmd != (READSCRIPT_OFF(vdsp_base, vdsp_off) >> 24)) {
PRINT_ADDR(cp->ccb);
printf ("internal error: cmd=%02x != %02x=(vdsp[0] >> 24)\n",
(unsigned)cmd,
(unsigned)READSCRIPT_OFF(vdsp_base, vdsp_off) >> 24);
return;
}
if (cmd & 0x06) {
PRINT_ADDR(cp->ccb);
printf ("phase change %x-%x %d@%08x resid=%d.\n",
cmd&7, sbcl&7, (unsigned)olen,
(unsigned)oadr, (unsigned)rest);
OUTB (nc_dcntl, np->rv_dcntl | STD);
return;
};
/*
** choose the correct patch area.
** if savep points to one, choose the other.
*/
newcmd = cp->patch;
if (cp->phys.header.savep == vtophys (newcmd)) newcmd+=4;
/*
** fillin the commands
*/
newcmd[0] = ((cmd & 0x0f) << 24) | rest;
newcmd[1] = oadr + olen - rest;
newcmd[2] = SCR_JUMP;
newcmd[3] = nxtdsp;
if (DEBUG_FLAGS & DEBUG_PHASE) {
PRINT_ADDR(cp->ccb);
printf ("newcmd[%d] %x %x %x %x.\n",
(int)(newcmd - cp->patch),
(unsigned)newcmd[0],
(unsigned)newcmd[1],
(unsigned)newcmd[2],
(unsigned)newcmd[3]);
}
/*
** fake the return address (to the patch).
** and restart script processor at dispatcher.
*/
np->profile.num_break++;
OUTL (nc_temp, vtophys (newcmd));
if ((cmd & 7) == 0)
OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, dispatch));
else
OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, checkatn));
}
/*==========================================================
**
**
** ncr chip exception handler for programmed interrupts.
**
**
**==========================================================
*/
static int ncr_show_msg (u_char * msg)
{
u_char i;
printf ("%x",*msg);
if (*msg==MSG_EXTENDED) {
for (i=1;i<8;i++) {
if (i-1>msg[1]) break;
printf ("-%x",msg[i]);
};
return (i+1);
} else if ((*msg & 0xf0) == 0x20) {
printf ("-%x",msg[1]);
return (2);
};
return (1);
}
void ncr_int_sir (ncb_p np)
{
u_char scntl3;
u_char chg, ofs, per, fak, wide;
u_char num = INB (nc_dsps);
nccb_p cp=0;
u_long dsa;
u_int target = INB (nc_ctest0) & 0x0f;
tcb_p tp = &np->target[target];
int i;
if (DEBUG_FLAGS & DEBUG_TINY) printf ("I#%d", num);
switch (num) {
case SIR_SENSE_RESTART:
case SIR_STALL_RESTART:
break;
default:
/*
** lookup the nccb
*/
dsa = INL (nc_dsa);
cp = np->link_nccb;
while (cp && (CCB_PHYS (cp, phys) != dsa))
cp = cp->link_nccb;
assert (cp);
if (!cp)
goto out;
assert (cp == np->header.cp);
if (cp != np->header.cp)
goto out;
}
switch (num) {
/*--------------------------------------------------------------------
**
** Processing of interrupted getcc selects
**
**--------------------------------------------------------------------
*/
case SIR_SENSE_RESTART:
/*------------------------------------------
** Script processor is idle.
** Look for interrupted "check cond"
**------------------------------------------
*/
if (DEBUG_FLAGS & DEBUG_RESTART)
printf ("%s: int#%d",ncr_name (np),num);
cp = (nccb_p) 0;
for (i=0; i<MAX_TARGET; i++) {
if (DEBUG_FLAGS & DEBUG_RESTART) printf (" t%d", i);
tp = &np->target[i];
if (DEBUG_FLAGS & DEBUG_RESTART) printf ("+");
cp = tp->hold_cp;
if (!cp) continue;
if (DEBUG_FLAGS & DEBUG_RESTART) printf ("+");
if ((cp->host_status==HS_BUSY) &&
(cp->s_status==SCSI_STATUS_CHECK_COND))
break;
if (DEBUG_FLAGS & DEBUG_RESTART) printf ("- (remove)");
tp->hold_cp = cp = (nccb_p) 0;
};
if (cp) {
if (DEBUG_FLAGS & DEBUG_RESTART)
printf ("+ restart job ..\n");
OUTL (nc_dsa, CCB_PHYS (cp, phys));
OUTL (nc_dsp, NCB_SCRIPTH_PHYS (np, getcc));
return;
};
/*
** no job, resume normal processing
*/
if (DEBUG_FLAGS & DEBUG_RESTART) printf (" -- remove trap\n");
WRITESCRIPT(start0[0], SCR_INT ^ IFFALSE (0));
break;
case SIR_SENSE_FAILED:
/*-------------------------------------------
** While trying to select for
** getting the condition code,
** a target reselected us.
**-------------------------------------------
*/
if (DEBUG_FLAGS & DEBUG_RESTART) {
PRINT_ADDR(cp->ccb);
printf ("in getcc reselect by t%d.\n",
INB(nc_ssid) & 0x0f);
}
/*
** Mark this job
*/
cp->host_status = HS_BUSY;
cp->s_status = SCSI_STATUS_CHECK_COND;
np->target[cp->ccb->ccb_h.target_id].hold_cp = cp;
/*
** And patch code to restart it.
*/
WRITESCRIPT(start0[0], SCR_INT);
break;
/*-----------------------------------------------------------------------------
**
** Was Sie schon immer ueber transfermode negotiation wissen wollten ...
**
** We try to negotiate sync and wide transfer only after
** a successfull inquire command. We look at byte 7 of the
** inquire data to determine the capabilities if the target.
**
** When we try to negotiate, we append the negotiation message
** to the identify and (maybe) simple tag message.
** The host status field is set to HS_NEGOTIATE to mark this
** situation.
**
** If the target doesn't answer this message immidiately
** (as required by the standard), the SIR_NEGO_FAIL interrupt
** will be raised eventually.
** The handler removes the HS_NEGOTIATE status, and sets the
** negotiated value to the default (async / nowide).
**
** If we receive a matching answer immediately, we check it
** for validity, and set the values.
**
** If we receive a Reject message immediately, we assume the
** negotiation has failed, and fall back to standard values.
**
** If we receive a negotiation message while not in HS_NEGOTIATE
** state, it's a target initiated negotiation. We prepare a
** (hopefully) valid answer, set our parameters, and send back
** this answer to the target.
**
** If the target doesn't fetch the answer (no message out phase),
** we assume the negotiation has failed, and fall back to default
** settings.
**
** When we set the values, we adjust them in all nccbs belonging
** to this target, in the controller's register, and in the "phys"
** field of the controller's struct ncb.
**
** Possible cases: hs sir msg_in value send goto
** We try try to negotiate:
** -> target doesnt't msgin NEG FAIL noop defa. - dispatch
** -> target rejected our msg NEG FAIL reject defa. - dispatch
** -> target answered (ok) NEG SYNC sdtr set - clrack
** -> target answered (!ok) NEG SYNC sdtr defa. REJ--->msg_bad
** -> target answered (ok) NEG WIDE wdtr set - clrack
** -> target answered (!ok) NEG WIDE wdtr defa. REJ--->msg_bad
** -> any other msgin NEG FAIL noop defa. - dispatch
**
** Target tries to negotiate:
** -> incoming message --- SYNC sdtr set SDTR -
** -> incoming message --- WIDE wdtr set WDTR -
** We sent our answer:
** -> target doesn't msgout --- PROTO ? defa. - dispatch
**
**-----------------------------------------------------------------------------
*/
case SIR_NEGO_FAILED:
/*-------------------------------------------------------
**
** Negotiation failed.
** Target doesn't send an answer message,
** or target rejected our message.
**
** Remove negotiation request.
**
**-------------------------------------------------------
*/
OUTB (HS_PRT, HS_BUSY);
/* fall through */
case SIR_NEGO_PROTO:
/*-------------------------------------------------------
**
** Negotiation failed.
** Target doesn't fetch the answer message.
**
**-------------------------------------------------------
*/
if (DEBUG_FLAGS & DEBUG_NEGO) {
PRINT_ADDR(cp->ccb);
printf ("negotiation failed sir=%x status=%x.\n",
num, cp->nego_status);
};
/*
** any error in negotiation:
** fall back to default mode.
*/
switch (cp->nego_status) {
case NS_SYNC:
ncr_setsync (np, cp, 0, 0xe0, 0);
break;
case NS_WIDE:
ncr_setwide (np, cp, 0, 0);
break;
};
np->msgin [0] = MSG_NOOP;
np->msgout[0] = MSG_NOOP;
cp->nego_status = 0;
OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, dispatch));
break;
case SIR_NEGO_SYNC:
/*
** Synchronous request message received.
*/
if (DEBUG_FLAGS & DEBUG_NEGO) {
PRINT_ADDR(cp->ccb);
printf ("sync msgin: ");
(void) ncr_show_msg (np->msgin);
printf (".\n");
};
/*
** get requested values.
*/
chg = 0;
per = np->msgin[3];
ofs = np->msgin[4];
if (ofs==0) per=255;
/*
** check values against driver limits.
*/
if (per < np->minsync)
{chg = 1; per = np->minsync;}
if (per < tp->tinfo.user.period)
{chg = 1; per = tp->tinfo.user.period;}
if (ofs > tp->tinfo.user.offset)
{chg = 1; ofs = tp->tinfo.user.offset;}
/*
** Check against controller limits.
*/
fak = 7;
scntl3 = 0;
if (ofs != 0) {
ncr_getsync(np, per, &fak, &scntl3);
if (fak > 7) {
chg = 1;
ofs = 0;
}
}
if (ofs == 0) {
fak = 7;
per = 0;
scntl3 = 0;
}
if (DEBUG_FLAGS & DEBUG_NEGO) {
PRINT_ADDR(cp->ccb);
printf ("sync: per=%d scntl3=0x%x ofs=%d fak=%d chg=%d.\n",
per, scntl3, ofs, fak, chg);
}
if (INB (HS_PRT) == HS_NEGOTIATE) {
OUTB (HS_PRT, HS_BUSY);
switch (cp->nego_status) {
case NS_SYNC:
/*
** This was an answer message
*/
if (chg) {
/*
** Answer wasn't acceptable.
*/
ncr_setsync (np, cp, 0, 0xe0, 0);
OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, msg_bad));
} else {
/*
** Answer is ok.
*/
ncr_setsync (np,cp,scntl3,(fak<<5)|ofs, per);
OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, clrack));
};
return;
case NS_WIDE:
ncr_setwide (np, cp, 0, 0);
break;
};
};
/*
** It was a request. Set value and
** prepare an answer message
*/
ncr_setsync (np, cp, scntl3, (fak<<5)|ofs, per);
np->msgout[0] = MSG_EXTENDED;
np->msgout[1] = 3;
np->msgout[2] = MSG_EXT_SDTR;
np->msgout[3] = per;
np->msgout[4] = ofs;
cp->nego_status = NS_SYNC;
if (DEBUG_FLAGS & DEBUG_NEGO) {
PRINT_ADDR(cp->ccb);
printf ("sync msgout: ");
(void) ncr_show_msg (np->msgout);
printf (".\n");
}
if (!ofs) {
OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, msg_bad));
return;
}
np->msgin [0] = MSG_NOOP;
break;
case SIR_NEGO_WIDE:
/*
** Wide request message received.
*/
if (DEBUG_FLAGS & DEBUG_NEGO) {
PRINT_ADDR(cp->ccb);
printf ("wide msgin: ");
(void) ncr_show_msg (np->msgin);
printf (".\n");
};
/*
** get requested values.
*/
chg = 0;
wide = np->msgin[3];
/*
** check values against driver limits.
*/
if (wide > tp->tinfo.user.width)
{chg = 1; wide = tp->tinfo.user.width;}
if (DEBUG_FLAGS & DEBUG_NEGO) {
PRINT_ADDR(cp->ccb);
printf ("wide: wide=%d chg=%d.\n", wide, chg);
}
if (INB (HS_PRT) == HS_NEGOTIATE) {
OUTB (HS_PRT, HS_BUSY);
switch (cp->nego_status) {
case NS_WIDE:
/*
** This was an answer message
*/
if (chg) {
/*
** Answer wasn't acceptable.
*/
ncr_setwide (np, cp, 0, 1);
OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, msg_bad));
} else {
/*
** Answer is ok.
*/
ncr_setwide (np, cp, wide, 1);
OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, clrack));
};
return;
case NS_SYNC:
ncr_setsync (np, cp, 0, 0xe0, 0);
break;
};
};
/*
** It was a request, set value and
** prepare an answer message
*/
ncr_setwide (np, cp, wide, 1);
np->msgout[0] = MSG_EXTENDED;
np->msgout[1] = 2;
np->msgout[2] = MSG_EXT_WDTR;
np->msgout[3] = wide;
np->msgin [0] = MSG_NOOP;
cp->nego_status = NS_WIDE;
if (DEBUG_FLAGS & DEBUG_NEGO) {
PRINT_ADDR(cp->ccb);
printf ("wide msgout: ");
(void) ncr_show_msg (np->msgout);
printf (".\n");
}
break;
/*--------------------------------------------------------------------
**
** Processing of special messages
**
**--------------------------------------------------------------------
*/
case SIR_REJECT_RECEIVED:
/*-----------------------------------------------
**
** We received a MSG_MESSAGE_REJECT message.
**
**-----------------------------------------------
*/
PRINT_ADDR(cp->ccb);
printf ("MSG_MESSAGE_REJECT received (%x:%x).\n",
(unsigned)np->lastmsg, np->msgout[0]);
break;
case SIR_REJECT_SENT:
/*-----------------------------------------------
**
** We received an unknown message
**
**-----------------------------------------------
*/
PRINT_ADDR(cp->ccb);
printf ("MSG_MESSAGE_REJECT sent for ");
(void) ncr_show_msg (np->msgin);
printf (".\n");
break;
/*--------------------------------------------------------------------
**
** Processing of special messages
**
**--------------------------------------------------------------------
*/
case SIR_IGN_RESIDUE:
/*-----------------------------------------------
**
** We received an IGNORE RESIDUE message,
** which couldn't be handled by the script.
**
**-----------------------------------------------
*/
PRINT_ADDR(cp->ccb);
printf ("MSG_IGN_WIDE_RESIDUE received, but not yet implemented.\n");
break;
case SIR_MISSING_SAVE:
/*-----------------------------------------------
**
** We received an DISCONNECT message,
** but the datapointer wasn't saved before.
**
**-----------------------------------------------
*/
PRINT_ADDR(cp->ccb);
printf ("MSG_DISCONNECT received, but datapointer not saved:\n"
"\tdata=%x save=%x goal=%x.\n",
(unsigned) INL (nc_temp),
(unsigned) np->header.savep,
(unsigned) np->header.goalp);
break;
/*--------------------------------------------------------------------
**
** Processing of a "SCSI_STATUS_QUEUE_FULL" status.
**
** XXX JGibbs - We should do the same thing for BUSY status.
**
** The current command has been rejected,
** because there are too many in the command queue.
** We have started too many commands for that target.
**
**--------------------------------------------------------------------
*/
case SIR_STALL_QUEUE:
cp->xerr_status = XE_OK;
cp->host_status = HS_COMPLETE;
cp->s_status = SCSI_STATUS_QUEUE_FULL;
ncr_freeze_devq(np, cp->ccb->ccb_h.path);
ncr_complete(np, cp);
/* FALL THROUGH */
case SIR_STALL_RESTART:
/*-----------------------------------------------
**
** Enable selecting again,
** if NO disconnected jobs.
**
**-----------------------------------------------
*/
/*
** Look for a disconnected job.
*/
cp = np->link_nccb;
while (cp && cp->host_status != HS_DISCONNECT)
cp = cp->link_nccb;
/*
** if there is one, ...
*/
if (cp) {
/*
** wait for reselection
*/
OUTL (nc_dsp, NCB_SCRIPT_PHYS (np, reselect));
return;
};
/*
** else remove the interrupt.
*/
printf ("%s: queue empty.\n", ncr_name (np));
WRITESCRIPT(start1[0], SCR_INT ^ IFFALSE (0));
break;
};
out:
OUTB (nc_dcntl, np->rv_dcntl | STD);
}
/*==========================================================
**
**
** Aquire a control block
**
**
**==========================================================
*/
static nccb_p ncr_get_nccb
(ncb_p np, u_long target, u_long lun)
{
lcb_p lp;
int s;
nccb_p cp = NULL;
/* Keep our timeout handler out */
s = splsoftclock();
/*
** Lun structure available ?
*/
lp = np->target[target].lp[lun];
if (lp) {
cp = lp->next_nccb;
/*
** Look for free CCB
*/
while (cp && cp->magic) {
cp = cp->next_nccb;
}
}
/*
** if nothing available, create one.
*/
if (cp == NULL)
cp = ncr_alloc_nccb(np, target, lun);
if (cp != NULL) {
if (cp->magic) {
printf("%s: Bogus free cp found\n", ncr_name(np));
splx(s);
return (NULL);
}
cp->magic = 1;
}
splx(s);
return (cp);
}
/*==========================================================
**
**
** Release one control block
**
**
**==========================================================
*/
void ncr_free_nccb (ncb_p np, nccb_p cp)
{
/*
** sanity
*/
assert (cp != NULL);
cp -> host_status = HS_IDLE;
cp -> magic = 0;
}
/*==========================================================
**
**
** Allocation of resources for Targets/Luns/Tags.
**
**
**==========================================================
*/
static nccb_p
ncr_alloc_nccb (ncb_p np, u_long target, u_long lun)
{
tcb_p tp;
lcb_p lp;
nccb_p cp;
assert (np != NULL);
if (target>=MAX_TARGET) return(NULL);
if (lun >=MAX_LUN ) return(NULL);
tp=&np->target[target];
if (!tp->jump_tcb.l_cmd) {
/*
** initialize it.
*/
tp->jump_tcb.l_cmd = (SCR_JUMP^IFFALSE (DATA (0x80 + target)));
tp->jump_tcb.l_paddr = np->jump_tcb.l_paddr;
tp->getscr[0] =
(np->features & FE_PFEN)? SCR_COPY(1) : SCR_COPY_F(1);
tp->getscr[1] = vtophys (&tp->tinfo.sval);
tp->getscr[2] = np->paddr + offsetof (struct ncr_reg, nc_sxfer);
tp->getscr[3] =
(np->features & FE_PFEN)? SCR_COPY(1) : SCR_COPY_F(1);
tp->getscr[4] = vtophys (&tp->tinfo.wval);
tp->getscr[5] = np->paddr + offsetof (struct ncr_reg, nc_scntl3);
assert (((offsetof(struct ncr_reg, nc_sxfer) ^
(offsetof(struct tcb ,tinfo)
+ offsetof(struct ncr_target_tinfo, sval))) & 3) == 0);
assert (((offsetof(struct ncr_reg, nc_scntl3) ^
(offsetof(struct tcb, tinfo)
+ offsetof(struct ncr_target_tinfo, wval))) &3) == 0);
tp->call_lun.l_cmd = (SCR_CALL);
tp->call_lun.l_paddr = NCB_SCRIPT_PHYS (np, resel_lun);
tp->jump_lcb.l_cmd = (SCR_JUMP);
tp->jump_lcb.l_paddr = NCB_SCRIPTH_PHYS (np, abort);
np->jump_tcb.l_paddr = vtophys (&tp->jump_tcb);
}
/*
** Logic unit control block
*/
lp = tp->lp[lun];
if (!lp) {
/*
** Allocate a lcb
*/
lp = (lcb_p) malloc (sizeof (struct lcb), M_DEVBUF, M_NOWAIT);
if (!lp) return(NULL);
/*
** Initialize it
*/
bzero (lp, sizeof (*lp));
lp->jump_lcb.l_cmd = (SCR_JUMP ^ IFFALSE (DATA (lun)));
lp->jump_lcb.l_paddr = tp->jump_lcb.l_paddr;
lp->call_tag.l_cmd = (SCR_CALL);
lp->call_tag.l_paddr = NCB_SCRIPT_PHYS (np, resel_tag);
lp->jump_nccb.l_cmd = (SCR_JUMP);
lp->jump_nccb.l_paddr = NCB_SCRIPTH_PHYS (np, aborttag);
lp->actlink = 1;
/*
** Chain into LUN list
*/
tp->jump_lcb.l_paddr = vtophys (&lp->jump_lcb);
tp->lp[lun] = lp;
}
/*
** Allocate a nccb
*/
cp = (nccb_p) malloc (sizeof (struct nccb), M_DEVBUF, M_NOWAIT);
if (!cp)
return (NULL);
if (DEBUG_FLAGS & DEBUG_ALLOC) {
printf ("new nccb @%p.\n", cp);
}
/*
** Initialize it
*/
bzero (cp, sizeof (*cp));
/*
** Fill in physical addresses
*/
cp->p_nccb = vtophys (cp);
/*
** Chain into reselect list
*/
cp->jump_nccb.l_cmd = SCR_JUMP;
cp->jump_nccb.l_paddr = lp->jump_nccb.l_paddr;
lp->jump_nccb.l_paddr = CCB_PHYS (cp, jump_nccb);
cp->call_tmp.l_cmd = SCR_CALL;
cp->call_tmp.l_paddr = NCB_SCRIPT_PHYS (np, resel_tmp);
/*
** Chain into wakeup list
*/
cp->link_nccb = np->link_nccb;
np->link_nccb = cp;
/*
** Chain into CCB list
*/
cp->next_nccb = lp->next_nccb;
lp->next_nccb = cp;
return (cp);
}
/*==========================================================
**
**
** Build Scatter Gather Block
**
**
**==========================================================
**
** The transfer area may be scattered among
** several non adjacent physical pages.
**
** We may use MAX_SCATTER blocks.
**
**----------------------------------------------------------
*/
static int ncr_scatter
(struct dsb* phys, vm_offset_t vaddr, vm_size_t datalen)
{
u_long paddr, pnext;
u_short segment = 0;
u_long segsize, segaddr;
u_long size, csize = 0;
u_long chunk = MAX_SIZE;
int free;
bzero (&phys->data, sizeof (phys->data));
if (!datalen) return (0);
paddr = vtophys (vaddr);
/*
** insert extra break points at a distance of chunk.
** We try to reduce the number of interrupts caused
** by unexpected phase changes due to disconnects.
** A typical harddisk may disconnect before ANY block.
** If we wanted to avoid unexpected phase changes at all
** we had to use a break point every 512 bytes.
** Of course the number of scatter/gather blocks is
** limited.
*/
free = MAX_SCATTER - 1;
if (vaddr & PAGE_MASK) free -= datalen / PAGE_SIZE;
if (free>1)
while ((chunk * free >= 2 * datalen) && (chunk>=1024))
chunk /= 2;
if(DEBUG_FLAGS & DEBUG_SCATTER)
printf("ncr?:\tscattering virtual=%p size=%d chunk=%d.\n",
(void *) vaddr, (unsigned) datalen, (unsigned) chunk);
/*
** Build data descriptors.
*/
while (datalen && (segment < MAX_SCATTER)) {
/*
** this segment is empty
*/
segsize = 0;
segaddr = paddr;
pnext = paddr;
if (!csize) csize = chunk;
while ((datalen) && (paddr == pnext) && (csize)) {
/*
** continue this segment
*/
pnext = (paddr & (~PAGE_MASK)) + PAGE_SIZE;
/*
** Compute max size
*/
size = pnext - paddr; /* page size */
if (size > datalen) size = datalen; /* data size */
if (size > csize ) size = csize ; /* chunksize */
segsize += size;
vaddr += size;
csize -= size;
datalen -= size;
paddr = vtophys (vaddr);
};
if(DEBUG_FLAGS & DEBUG_SCATTER)
printf ("\tseg #%d addr=%x size=%d (rest=%d).\n",
segment,
(unsigned) segaddr,
(unsigned) segsize,
(unsigned) datalen);
phys->data[segment].addr = segaddr;
phys->data[segment].size = segsize;
segment++;
}
if (datalen) {
printf("ncr?: scatter/gather failed (residue=%d).\n",
(unsigned) datalen);
return (-1);
};
return (segment);
}
/*==========================================================
**
**
** Test the pci bus snoop logic :-(
**
** Has to be called with interrupts disabled.
**
**
**==========================================================
*/
#ifndef NCR_IOMAPPED
static int ncr_regtest (struct ncb* np)
{
register volatile u_int32_t data;
/*
** ncr registers may NOT be cached.
** write 0xffffffff to a read only register area,
** and try to read it back.
*/
data = 0xffffffff;
OUTL_OFF(offsetof(struct ncr_reg, nc_dstat), data);
data = INL_OFF(offsetof(struct ncr_reg, nc_dstat));
#if 1
if (data == 0xffffffff) {
#else
if ((data & 0xe2f0fffd) != 0x02000080) {
#endif
printf ("CACHE TEST FAILED: reg dstat-sstat2 readback %x.\n",
(unsigned) data);
return (0x10);
};
return (0);
}
#endif
static int ncr_snooptest (struct ncb* np)
{
u_int32_t ncr_rd, ncr_wr, ncr_bk, host_rd, host_wr, pc;
int i, err=0;
#ifndef NCR_IOMAPPED
err |= ncr_regtest (np);
if (err) return (err);
#endif
/*
** init
*/
pc = NCB_SCRIPTH_PHYS (np, snooptest);
host_wr = 1;
ncr_wr = 2;
/*
** Set memory and register.
*/
ncr_cache = host_wr;
OUTL (nc_temp, ncr_wr);
/*
** Start script (exchange values)
*/
OUTL (nc_dsp, pc);
/*
** Wait 'til done (with timeout)
*/
for (i=0; i<NCR_SNOOP_TIMEOUT; i++)
if (INB(nc_istat) & (INTF|SIP|DIP))
break;
/*
** Save termination position.
*/
pc = INL (nc_dsp);
/*
** Read memory and register.
*/
host_rd = ncr_cache;
ncr_rd = INL (nc_scratcha);
ncr_bk = INL (nc_temp);
/*
** Reset ncr chip
*/
OUTB (nc_istat, SRST);
DELAY (1000);
OUTB (nc_istat, 0 );
/*
** check for timeout
*/
if (i>=NCR_SNOOP_TIMEOUT) {
printf ("CACHE TEST FAILED: timeout.\n");
return (0x20);
};
/*
** Check termination position.
*/
if (pc != NCB_SCRIPTH_PHYS (np, snoopend)+8) {
printf ("CACHE TEST FAILED: script execution failed.\n");
printf ("start=%08lx, pc=%08lx, end=%08lx\n",
(u_long) NCB_SCRIPTH_PHYS (np, snooptest), (u_long) pc,
(u_long) NCB_SCRIPTH_PHYS (np, snoopend) +8);
return (0x40);
};
/*
** Show results.
*/
if (host_wr != ncr_rd) {
printf ("CACHE TEST FAILED: host wrote %d, ncr read %d.\n",
(int) host_wr, (int) ncr_rd);
err |= 1;
};
if (host_rd != ncr_wr) {
printf ("CACHE TEST FAILED: ncr wrote %d, host read %d.\n",
(int) ncr_wr, (int) host_rd);
err |= 2;
};
if (ncr_bk != ncr_wr) {
printf ("CACHE TEST FAILED: ncr wrote %d, read back %d.\n",
(int) ncr_wr, (int) ncr_bk);
err |= 4;
};
return (err);
}
/*==========================================================
**
**
** Profiling the drivers and targets performance.
**
**
**==========================================================
*/
/*
** Compute the difference in milliseconds.
**/
static int ncr_delta (int *from, int *to)
{
if (!from) return (-1);
if (!to) return (-2);
return ((to - from) * 1000 / hz);
}
#define PROFILE cp->phys.header.stamp
static void ncb_profile (ncb_p np, nccb_p cp)
{
int co, da, st, en, di, se, post,work,disc;
u_long diff;
PROFILE.end = ticks;
st = ncr_delta (&PROFILE.start,&PROFILE.status);
if (st<0) return; /* status not reached */
da = ncr_delta (&PROFILE.start,&PROFILE.data);
if (da<0) return; /* No data transfer phase */
co = ncr_delta (&PROFILE.start,&PROFILE.command);
if (co<0) return; /* command not executed */
en = ncr_delta (&PROFILE.start,&PROFILE.end),
di = ncr_delta (&PROFILE.start,&PROFILE.disconnect),
se = ncr_delta (&PROFILE.start,&PROFILE.select);
post = en - st;
/*
** @PROFILE@ Disconnect time invalid if multiple disconnects
*/
if (di>=0) disc = se-di; else disc = 0;
work = (st - co) - disc;
diff = (np->disc_phys - np->disc_ref) & 0xff;
np->disc_ref += diff;
np->profile.num_trans += 1;
if (cp->ccb)
np->profile.num_bytes += cp->ccb->csio.dxfer_len;
np->profile.num_disc += diff;
np->profile.ms_setup += co;
np->profile.ms_data += work;
np->profile.ms_disc += disc;
np->profile.ms_post += post;
}
#undef PROFILE
/*==========================================================
**
** Determine the ncr's clock frequency.
** This is essential for the negotiation
** of the synchronous transfer rate.
**
**==========================================================
**
** Note: we have to return the correct value.
** THERE IS NO SAVE DEFAULT VALUE.
**
** Most NCR/SYMBIOS boards are delivered with a 40 Mhz clock.
** 53C860 and 53C875 rev. 1 support fast20 transfers but
** do not have a clock doubler and so are provided with a
** 80 MHz clock. All other fast20 boards incorporate a doubler
** and so should be delivered with a 40 MHz clock.
** The future fast40 chips (895/895) use a 40 Mhz base clock
** and provide a clock quadrupler (160 Mhz). The code below
** tries to deal as cleverly as possible with all this stuff.
**
**----------------------------------------------------------
*/
/*
* Select NCR SCSI clock frequency
*/
static void ncr_selectclock(ncb_p np, u_char scntl3)
{
if (np->multiplier < 2) {
OUTB(nc_scntl3, scntl3);
return;
}
if (bootverbose >= 2)
printf ("%s: enabling clock multiplier\n", ncr_name(np));
OUTB(nc_stest1, DBLEN); /* Enable clock multiplier */
if (np->multiplier > 2) { /* Poll bit 5 of stest4 for quadrupler */
int i = 20;
while (!(INB(nc_stest4) & LCKFRQ) && --i > 0)
DELAY(20);
if (!i)
printf("%s: the chip cannot lock the frequency\n", ncr_name(np));
} else /* Wait 20 micro-seconds for doubler */
DELAY(20);
OUTB(nc_stest3, HSC); /* Halt the scsi clock */
OUTB(nc_scntl3, scntl3);
OUTB(nc_stest1, (DBLEN|DBLSEL));/* Select clock multiplier */
OUTB(nc_stest3, 0x00); /* Restart scsi clock */
}
/*
* calculate NCR SCSI clock frequency (in KHz)
*/
static unsigned
ncrgetfreq (ncb_p np, int gen)
{
int ms = 0;
/*
* Measure GEN timer delay in order
* to calculate SCSI clock frequency
*
* This code will never execute too
* many loop iterations (if DELAY is
* reasonably correct). It could get
* too low a delay (too high a freq.)
* if the CPU is slow executing the
* loop for some reason (an NMI, for
* example). For this reason we will
* if multiple measurements are to be
* performed trust the higher delay
* (lower frequency returned).
*/
OUTB (nc_stest1, 0); /* make sure clock doubler is OFF */
OUTW (nc_sien , 0); /* mask all scsi interrupts */
(void) INW (nc_sist); /* clear pending scsi interrupt */
OUTB (nc_dien , 0); /* mask all dma interrupts */
(void) INW (nc_sist); /* another one, just to be sure :) */
OUTB (nc_scntl3, 4); /* set pre-scaler to divide by 3 */
OUTB (nc_stime1, 0); /* disable general purpose timer */
OUTB (nc_stime1, gen); /* set to nominal delay of (1<<gen) * 125us */
while (!(INW(nc_sist) & GEN) && ms++ < 1000)
DELAY(1000); /* count ms */
OUTB (nc_stime1, 0); /* disable general purpose timer */
OUTB (nc_scntl3, 0);
/*
* Set prescaler to divide by whatever "0" means.
* "0" ought to choose divide by 2, but appears
* to set divide by 3.5 mode in my 53c810 ...
*/
OUTB (nc_scntl3, 0);
if (bootverbose >= 2)
printf ("\tDelay (GEN=%d): %u msec\n", gen, ms);
/*
* adjust for prescaler, and convert into KHz
*/
return ms ? ((1 << gen) * 4440) / ms : 0;
}
static void ncr_getclock (ncb_p np, u_char multiplier)
{
unsigned char scntl3;
unsigned char stest1;
scntl3 = INB(nc_scntl3);
stest1 = INB(nc_stest1);
np->multiplier = 1;
if (multiplier > 1) {
np->multiplier = multiplier;
np->clock_khz = 40000 * multiplier;
} else {
if ((scntl3 & 7) == 0) {
unsigned f1, f2;
/* throw away first result */
(void) ncrgetfreq (np, 11);
f1 = ncrgetfreq (np, 11);
f2 = ncrgetfreq (np, 11);
if (bootverbose >= 2)
printf ("\tNCR clock is %uKHz, %uKHz\n", f1, f2);
if (f1 > f2) f1 = f2; /* trust lower result */
if (f1 > 45000) {
scntl3 = 5; /* >45Mhz: assume 80MHz */
} else {
scntl3 = 3; /* <45Mhz: assume 40MHz */
}
}
else if ((scntl3 & 7) == 5)
np->clock_khz = 80000; /* Probably a 875 rev. 1 ? */
}
}
/*=========================================================================*/
#ifdef NCR_TEKRAM_EEPROM
struct tekram_eeprom_dev {
u_char devmode;
#define TKR_PARCHK 0x01
#define TKR_TRYSYNC 0x02
#define TKR_ENDISC 0x04
#define TKR_STARTUNIT 0x08
#define TKR_USETAGS 0x10
#define TKR_TRYWIDE 0x20
u_char syncparam; /* max. sync transfer rate (table ?) */
u_char filler1;
u_char filler2;
};
struct tekram_eeprom {
struct tekram_eeprom_dev
dev[16];
u_char adaptid;
u_char adaptmode;
#define TKR_ADPT_GT2DRV 0x01
#define TKR_ADPT_GT1GB 0x02
#define TKR_ADPT_RSTBUS 0x04
#define TKR_ADPT_ACTNEG 0x08
#define TKR_ADPT_NOSEEK 0x10
#define TKR_ADPT_MORLUN 0x20
u_char delay; /* unit ? ( table ??? ) */
u_char tags; /* use 4 times as many ... */
u_char filler[60];
};
static void
tekram_write_bit (ncb_p np, int bit)
{
u_char val = 0x10 + ((bit & 1) << 1);
DELAY(10);
OUTB (nc_gpreg, val);
DELAY(10);
OUTB (nc_gpreg, val | 0x04);
DELAY(10);
OUTB (nc_gpreg, val);
DELAY(10);
}
static int
tekram_read_bit (ncb_p np)
{
OUTB (nc_gpreg, 0x10);
DELAY(10);
OUTB (nc_gpreg, 0x14);
DELAY(10);
return INB (nc_gpreg) & 1;
}
static u_short
read_tekram_eeprom_reg (ncb_p np, int reg)
{
int bit;
u_short result = 0;
int cmd = 0x80 | reg;
OUTB (nc_gpreg, 0x10);
tekram_write_bit (np, 1);
for (bit = 7; bit >= 0; bit--)
{
tekram_write_bit (np, cmd >> bit);
}
for (bit = 0; bit < 16; bit++)
{
result <<= 1;
result |= tekram_read_bit (np);
}
OUTB (nc_gpreg, 0x00);
return result;
}
static int
read_tekram_eeprom(ncb_p np, struct tekram_eeprom *buffer)
{
u_short *p = (u_short *) buffer;
u_short sum = 0;
int i;
if (INB (nc_gpcntl) != 0x09)
{
return 0;
}
for (i = 0; i < 64; i++)
{
u_short val;
if((i&0x0f) == 0) printf ("%02x:", i*2);
val = read_tekram_eeprom_reg (np, i);
if (p)
*p++ = val;
sum += val;
if((i&0x01) == 0x00) printf (" ");
printf ("%02x%02x", val & 0xff, (val >> 8) & 0xff);
if((i&0x0f) == 0x0f) printf ("\n");
}
printf ("Sum = %04x\n", sum);
return sum == 0x1234;
}
#endif /* NCR_TEKRAM_EEPROM */
/*=========================================================================*/
#endif /* KERNEL */
Reference in New Issue View Git Blame Copy Permalink