freebsd-nq/sys/dev/iwm/if_iwm_mac_ctxt.c
Adrian Chadd b80e7ca55b [iwm] Properly implement iwm_wme_update callback function.
* Inspired by iwn(4) and Linux iwlwifi.

* Read wme parameters into a buffer within struct iwm_vap in
  iwm_wme_update().

* If we aren't associated yet, the new settings will soon be sent
  by iwm_mvm_mac_ctxt_changed() during association.

* If we are already associated, explicitly call iwm_mvm_mac_ctxt_changed()
  from iwm_wme_update() to send the new settings to the firmware.

* Change iwm_mvm_ac_to_tx_fifo mapping, to fit the freebsd net80211
  WME stream class numbering, instead of Linux's enum ieee80211_ac_numbers.

Obtained from:	dragonflybsd.git b8bd6cd746d1f45e616ccfcbeed06dfe452a1108
2017-05-12 05:50:38 +00:00

557 lines
18 KiB
C

/* $OpenBSD: if_iwm.c,v 1.39 2015/03/23 00:35:19 jsg Exp $ */
/*
* Copyright (c) 2014 genua mbh <info@genua.de>
* Copyright (c) 2014 Fixup Software Ltd.
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/*-
* Based on BSD-licensed source modules in the Linux iwlwifi driver,
* which were used as the reference documentation for this implementation.
*
* Driver version we are currently based off of is
* Linux 3.14.3 (tag id a2df521e42b1d9a23f620ac79dbfe8655a8391dd)
*
***********************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called COPYING.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*
* BSD LICENSE
*
* Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*-
* Copyright (c) 2007-2010 Damien Bergamini <damien.bergamini@free.fr>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_wlan.h"
#include "opt_iwm.h"
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/endian.h>
#include <sys/firmware.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/mutex.h>
#include <sys/module.h>
#include <sys/proc.h>
#include <sys/rman.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/sysctl.h>
#include <sys/linker.h>
#include <machine/bus.h>
#include <machine/endian.h>
#include <machine/resource.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <net/bpf.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_arp.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/if_ether.h>
#include <netinet/ip.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_regdomain.h>
#include <net80211/ieee80211_ratectl.h>
#include <net80211/ieee80211_radiotap.h>
#include <dev/iwm/if_iwmreg.h>
#include <dev/iwm/if_iwmvar.h>
#include <dev/iwm/if_iwm_debug.h>
#include <dev/iwm/if_iwm_util.h>
#include <dev/iwm/if_iwm_mac_ctxt.h>
/*
* BEGIN mvm/mac-ctxt.c
*/
const uint8_t iwm_mvm_ac_to_tx_fifo[] = {
IWM_MVM_TX_FIFO_BE,
IWM_MVM_TX_FIFO_BK,
IWM_MVM_TX_FIFO_VI,
IWM_MVM_TX_FIFO_VO,
};
static void
iwm_mvm_ack_rates(struct iwm_softc *sc, int is2ghz,
int *cck_rates, int *ofdm_rates, struct iwm_node *in)
{
int lowest_present_ofdm = 100;
int lowest_present_cck = 100;
uint8_t cck = 0;
uint8_t ofdm = 0;
int i;
struct ieee80211_rateset *rs = &in->in_ni.ni_rates;
if (is2ghz) {
for (i = IWM_FIRST_CCK_RATE; i <= IWM_LAST_CCK_RATE; i++) {
if ((iwm_ridx2rate(rs, i) & IEEE80211_RATE_BASIC) == 0)
continue;
cck |= (1 << i);
if (lowest_present_cck > i)
lowest_present_cck = i;
}
}
for (i = IWM_FIRST_OFDM_RATE; i <= IWM_LAST_NON_HT_RATE; i++) {
if ((iwm_ridx2rate(rs, i) & IEEE80211_RATE_BASIC) == 0)
continue;
ofdm |= (1 << (i - IWM_FIRST_OFDM_RATE));
if (lowest_present_ofdm > i)
lowest_present_ofdm = i;
}
/*
* Now we've got the basic rates as bitmaps in the ofdm and cck
* variables. This isn't sufficient though, as there might not
* be all the right rates in the bitmap. E.g. if the only basic
* rates are 5.5 Mbps and 11 Mbps, we still need to add 1 Mbps
* and 6 Mbps because the 802.11-2007 standard says in 9.6:
*
* [...] a STA responding to a received frame shall transmit
* its Control Response frame [...] at the highest rate in the
* BSSBasicRateSet parameter that is less than or equal to the
* rate of the immediately previous frame in the frame exchange
* sequence ([...]) and that is of the same modulation class
* ([...]) as the received frame. If no rate contained in the
* BSSBasicRateSet parameter meets these conditions, then the
* control frame sent in response to a received frame shall be
* transmitted at the highest mandatory rate of the PHY that is
* less than or equal to the rate of the received frame, and
* that is of the same modulation class as the received frame.
*
* As a consequence, we need to add all mandatory rates that are
* lower than all of the basic rates to these bitmaps.
*/
if (IWM_RATE_24M_INDEX < lowest_present_ofdm)
ofdm |= IWM_RATE_BIT_MSK(24) >> IWM_FIRST_OFDM_RATE;
if (IWM_RATE_12M_INDEX < lowest_present_ofdm)
ofdm |= IWM_RATE_BIT_MSK(12) >> IWM_FIRST_OFDM_RATE;
/* 6M already there or needed so always add */
ofdm |= IWM_RATE_BIT_MSK(6) >> IWM_FIRST_OFDM_RATE;
/*
* CCK is a bit more complex with DSSS vs. HR/DSSS vs. ERP.
* Note, however:
* - if no CCK rates are basic, it must be ERP since there must
* be some basic rates at all, so they're OFDM => ERP PHY
* (or we're in 5 GHz, and the cck bitmap will never be used)
* - if 11M is a basic rate, it must be ERP as well, so add 5.5M
* - if 5.5M is basic, 1M and 2M are mandatory
* - if 2M is basic, 1M is mandatory
* - if 1M is basic, that's the only valid ACK rate.
* As a consequence, it's not as complicated as it sounds, just add
* any lower rates to the ACK rate bitmap.
*/
if (IWM_RATE_11M_INDEX < lowest_present_cck)
cck |= IWM_RATE_BIT_MSK(11) >> IWM_FIRST_CCK_RATE;
if (IWM_RATE_5M_INDEX < lowest_present_cck)
cck |= IWM_RATE_BIT_MSK(5) >> IWM_FIRST_CCK_RATE;
if (IWM_RATE_2M_INDEX < lowest_present_cck)
cck |= IWM_RATE_BIT_MSK(2) >> IWM_FIRST_CCK_RATE;
/* 1M already there or needed so always add */
cck |= IWM_RATE_BIT_MSK(1) >> IWM_FIRST_CCK_RATE;
*cck_rates = cck;
*ofdm_rates = ofdm;
}
static void
iwm_mvm_mac_ctxt_cmd_common(struct iwm_softc *sc, struct iwm_node *in,
struct iwm_mac_ctx_cmd *cmd, uint32_t action)
{
struct ieee80211com *ic = &sc->sc_ic;
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
struct ieee80211_node *ni = vap->iv_bss;
struct iwm_vap *ivp = IWM_VAP(vap);
int cck_ack_rates, ofdm_ack_rates;
int i;
int is2ghz;
/*
* id is the MAC address ID - something to do with MAC filtering.
* color - not sure.
*
* These are both functions of the vap, not of the node.
* So, for now, hard-code both to 0 (default).
*/
cmd->id_and_color = htole32(IWM_FW_CMD_ID_AND_COLOR(ivp->id,
ivp->color));
cmd->action = htole32(action);
cmd->mac_type = htole32(IWM_FW_MAC_TYPE_BSS_STA);
/*
* The TSF ID is one of four TSF tracking resources in the firmware.
* Read the iwlwifi/mvm code for more details.
*
* For now, just hard-code it to TSF tracking ID 0; we only support
* a single STA mode VAP.
*
* It's per-vap, not per-node.
*/
cmd->tsf_id = htole32(IWM_DEFAULT_TSFID);
IEEE80211_ADDR_COPY(cmd->node_addr, vap->iv_myaddr);
/*
* XXX should we error out if in_assoc is 1 and ni == NULL?
*/
#if 0
if (in->in_assoc) {
IEEE80211_ADDR_COPY(cmd->bssid_addr, ni->ni_bssid);
} else {
/* eth broadcast address */
IEEE80211_ADDR_COPY(cmd->bssid_addr, ieee80211broadcastaddr);
}
#else
/*
* XXX This workaround makes the firmware behave more correctly once
* we are associated, regularly giving us statistics notifications,
* as well as signaling missed beacons to us.
* Since we only call iwm_mvm_mac_ctxt_add() and
* iwm_mvm_mac_ctxt_changed() when already authenticating or
* associating, ni->ni_bssid should always make sense here.
*/
IEEE80211_ADDR_COPY(cmd->bssid_addr, ni->ni_bssid);
#endif
/*
* Default to 2ghz if no node information is given.
*/
if (in && in->in_ni.ni_chan != IEEE80211_CHAN_ANYC) {
is2ghz = !! IEEE80211_IS_CHAN_2GHZ(in->in_ni.ni_chan);
} else {
is2ghz = 1;
}
iwm_mvm_ack_rates(sc, is2ghz, &cck_ack_rates, &ofdm_ack_rates, in);
cmd->cck_rates = htole32(cck_ack_rates);
cmd->ofdm_rates = htole32(ofdm_ack_rates);
cmd->cck_short_preamble
= htole32((ic->ic_flags & IEEE80211_F_SHPREAMBLE)
? IWM_MAC_FLG_SHORT_PREAMBLE : 0);
cmd->short_slot
= htole32((ic->ic_flags & IEEE80211_F_SHSLOT)
? IWM_MAC_FLG_SHORT_SLOT : 0);
/*
* XXX TODO: if we're doing QOS..
* cmd->qos_flags |= cpu_to_le32(MAC_QOS_FLG_UPDATE_EDCA)
*/
for (i = 0; i < WME_NUM_AC; i++) {
uint8_t txf = iwm_mvm_ac_to_tx_fifo[i];
cmd->ac[txf].cw_min = htole16(ivp->queue_params[i].cw_min);
cmd->ac[txf].cw_max = htole16(ivp->queue_params[i].cw_max);
cmd->ac[txf].edca_txop =
htole16(ivp->queue_params[i].edca_txop);
cmd->ac[txf].aifsn = ivp->queue_params[i].aifsn;
cmd->ac[txf].fifos_mask = (1 << txf);
}
if (ivp->have_wme)
cmd->qos_flags |= htole32(IWM_MAC_QOS_FLG_UPDATE_EDCA);
if (ic->ic_flags & IEEE80211_F_USEPROT)
cmd->protection_flags |= htole32(IWM_MAC_PROT_FLG_TGG_PROTECT);
cmd->filter_flags = htole32(IWM_MAC_FILTER_ACCEPT_GRP);
}
static int
iwm_mvm_mac_ctxt_send_cmd(struct iwm_softc *sc, struct iwm_mac_ctx_cmd *cmd)
{
int ret = iwm_mvm_send_cmd_pdu(sc, IWM_MAC_CONTEXT_CMD, IWM_CMD_SYNC,
sizeof(*cmd), cmd);
if (ret)
device_printf(sc->sc_dev,
"%s: Failed to send MAC context (action:%d): %d\n",
__func__, le32toh(cmd->action), ret);
return ret;
}
/*
* Fill the specific data for mac context of type station or p2p client
*/
static void
iwm_mvm_mac_ctxt_cmd_fill_sta(struct iwm_softc *sc, struct iwm_node *in,
struct iwm_mac_data_sta *ctxt_sta, int force_assoc_off)
{
struct ieee80211_node *ni = &in->in_ni;
unsigned dtim_period, dtim_count;
struct ieee80211com *ic = &sc->sc_ic;
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
/* will this work? */
dtim_period = vap->iv_dtim_period;
dtim_count = vap->iv_dtim_count;
IWM_DPRINTF(sc, IWM_DEBUG_RESET | IWM_DEBUG_BEACON | IWM_DEBUG_CMD,
"%s: force_assoc_off=%d\n", __func__, force_assoc_off);
IWM_DPRINTF(sc, IWM_DEBUG_RESET | IWM_DEBUG_BEACON | IWM_DEBUG_CMD,
"DTIM: period=%d count=%d\n", dtim_period, dtim_count);
IWM_DPRINTF(sc, IWM_DEBUG_RESET | IWM_DEBUG_BEACON | IWM_DEBUG_CMD,
"BEACON: tsf: %llu, ni_intval=%d\n",
(unsigned long long) le64toh(ni->ni_tstamp.tsf),
ni->ni_intval);
/* We need the dtim_period to set the MAC as associated */
if (in->in_assoc && dtim_period && !force_assoc_off) {
uint64_t tsf;
uint32_t dtim_offs;
/*
* The DTIM count counts down, so when it is N that means N
* more beacon intervals happen until the DTIM TBTT. Therefore
* add this to the current time. If that ends up being in the
* future, the firmware will handle it.
*
* Also note that the system_timestamp (which we get here as
* "sync_device_ts") and TSF timestamp aren't at exactly the
* same offset in the frame -- the TSF is at the first symbol
* of the TSF, the system timestamp is at signal acquisition
* time. This means there's an offset between them of at most
* a few hundred microseconds (24 * 8 bits + PLCP time gives
* 384us in the longest case), this is currently not relevant
* as the firmware wakes up around 2ms before the TBTT.
*/
dtim_offs = dtim_count * ni->ni_intval;
/* convert TU to usecs */
dtim_offs *= 1024;
/*
* net80211: TSF is in 802.11 order, so convert up to local
* ordering before we manipulate things.
*/
tsf = le64toh(ni->ni_tstamp.tsf);
ctxt_sta->dtim_tsf = htole64(tsf + dtim_offs);
ctxt_sta->dtim_time = htole32(tsf + dtim_offs);
IWM_DPRINTF(sc, IWM_DEBUG_RESET | IWM_DEBUG_BEACON | IWM_DEBUG_CMD,
"DTIM TBTT is 0x%llx/0x%x, offset %d\n",
(long long)le64toh(ctxt_sta->dtim_tsf),
le32toh(ctxt_sta->dtim_time), dtim_offs);
ctxt_sta->is_assoc = htole32(1);
} else {
ctxt_sta->is_assoc = htole32(0);
}
IWM_DPRINTF(sc, IWM_DEBUG_RESET | IWM_DEBUG_CMD | IWM_DEBUG_BEACON,
"%s: ni_intval: %d, bi_reciprocal: %d, dtim_interval: %d, dtim_reciprocal: %d\n",
__func__,
ni->ni_intval,
iwm_mvm_reciprocal(ni->ni_intval),
ni->ni_intval * dtim_period,
iwm_mvm_reciprocal(ni->ni_intval * dtim_period));
ctxt_sta->bi = htole32(ni->ni_intval);
ctxt_sta->bi_reciprocal = htole32(iwm_mvm_reciprocal(ni->ni_intval));
ctxt_sta->dtim_interval = htole32(ni->ni_intval * dtim_period);
ctxt_sta->dtim_reciprocal =
htole32(iwm_mvm_reciprocal(ni->ni_intval * dtim_period));
/* 10 = CONN_MAX_LISTEN_INTERVAL */
ctxt_sta->listen_interval = htole32(10);
IWM_DPRINTF(sc, IWM_DEBUG_RESET | IWM_DEBUG_CMD | IWM_DEBUG_BEACON,
"%s: associd=%d\n", __func__, IEEE80211_AID(ni->ni_associd));
ctxt_sta->assoc_id = htole32(IEEE80211_AID(ni->ni_associd));
}
static int
iwm_mvm_mac_ctxt_cmd_station(struct iwm_softc *sc, struct ieee80211vap *vap,
uint32_t action)
{
struct ieee80211_node *ni = vap->iv_bss;
struct iwm_node *in = IWM_NODE(ni);
struct iwm_mac_ctx_cmd cmd = {};
IWM_DPRINTF(sc, IWM_DEBUG_RESET,
"%s: called; action=%d\n", __func__, action);
/* Fill the common data for all mac context types */
iwm_mvm_mac_ctxt_cmd_common(sc, in, &cmd, action);
/* Allow beacons to pass through as long as we are not associated,or we
* do not have dtim period information */
if (!in->in_assoc || !vap->iv_dtim_period)
cmd.filter_flags |= htole32(IWM_MAC_FILTER_IN_BEACON);
else
cmd.filter_flags &= ~htole32(IWM_MAC_FILTER_IN_BEACON);
/* Fill the data specific for station mode */
iwm_mvm_mac_ctxt_cmd_fill_sta(sc, in,
&cmd.sta, action == IWM_FW_CTXT_ACTION_ADD);
return iwm_mvm_mac_ctxt_send_cmd(sc, &cmd);
}
static int
iwm_mvm_mac_ctx_send(struct iwm_softc *sc, struct ieee80211vap *vap,
uint32_t action)
{
return iwm_mvm_mac_ctxt_cmd_station(sc, vap, action);
}
int
iwm_mvm_mac_ctxt_add(struct iwm_softc *sc, struct ieee80211vap *vap)
{
struct iwm_vap *iv = IWM_VAP(vap);
int ret;
if (iv->is_uploaded != 0) {
device_printf(sc->sc_dev, "%s: called; uploaded != 0\n",
__func__);
return (EIO);
}
ret = iwm_mvm_mac_ctx_send(sc, vap, IWM_FW_CTXT_ACTION_ADD);
if (ret)
return (ret);
iv->is_uploaded = 1;
return (0);
}
int
iwm_mvm_mac_ctxt_changed(struct iwm_softc *sc, struct ieee80211vap *vap)
{
struct iwm_vap *iv = IWM_VAP(vap);
if (iv->is_uploaded == 0) {
device_printf(sc->sc_dev, "%s: called; uploaded = 0\n",
__func__);
return (EIO);
}
return iwm_mvm_mac_ctx_send(sc, vap, IWM_FW_CTXT_ACTION_MODIFY);
}
#if 0
static int
iwm_mvm_mac_ctxt_remove(struct iwm_softc *sc, struct iwm_node *in)
{
struct iwm_mac_ctx_cmd cmd;
int ret;
if (!in->in_uploaded) {
device_printf(sc->sc_dev,
"attempt to remove !uploaded node %p", in);
return EIO;
}
memset(&cmd, 0, sizeof(cmd));
cmd.id_and_color = htole32(IWM_FW_CMD_ID_AND_COLOR(IWM_DEFAULT_MACID,
IWM_DEFAULT_COLOR));
cmd.action = htole32(IWM_FW_CTXT_ACTION_REMOVE);
ret = iwm_mvm_send_cmd_pdu(sc,
IWM_MAC_CONTEXT_CMD, IWM_CMD_SYNC, sizeof(cmd), &cmd);
if (ret) {
device_printf(sc->sc_dev,
"Failed to remove MAC context: %d\n", ret);
return ret;
}
in->in_uploaded = 0;
return 0;
}
#endif