freebsd-nq/sys/dev/usb/ohci_pci.c
Warner Losh bbc84740c1 Latest round of usb cleanups:
o Consistently use device_foo_t and bus_foo_t for functions implementing
  device_foo and bus_foo respectively.  Adjust those routines that were wrong
  (we should do this throughout the tree).
o make all the modules depend on usb.  Otherwise these modules won't
  load.
o ucycom doesn't need usb_port.h
o Minor unifdefing
o uhub, umass, ums, urio, uscanner conversion complete.
o ukbd: Remove the NO_SET_PROTO quirk (fixes a PR 77940).  NetBSD removed
  their check and setting the proto a long time ago.
o umodem panic fixed.  UQ_ASSUME_CM_OVER_DATA quirk removed because I've never
  seen a umodem that needed this rejection for proection (this gets rid of
  ~20% of the quirks).

Approved by: re@ (kensmith)
PR: 77940
2007-06-21 14:42:34 +00:00

413 lines
12 KiB
C

/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (augustss@carlstedt.se) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* USB Open Host Controller driver.
*
* OHCI spec: http://www.intel.com/design/usb/ohci11d.pdf
*/
/* The low level controller code for OHCI has been split into
* PCI probes and OHCI specific code. This was done to facilitate the
* sharing of code between *BSD's
*/
#include "opt_bus.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/bus.h>
#include <sys/queue.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdivar.h>
#include <dev/usb/usb_mem.h>
#include <dev/usb/ohcireg.h>
#include <dev/usb/ohcivar.h>
#define PCI_OHCI_VENDORID_ACERLABS 0x10b9
#define PCI_OHCI_VENDORID_AMD 0x1022
#define PCI_OHCI_VENDORID_APPLE 0x106b
#define PCI_OHCI_VENDORID_ATI 0x1002
#define PCI_OHCI_VENDORID_CMDTECH 0x1095
#define PCI_OHCI_VENDORID_NEC 0x1033
#define PCI_OHCI_VENDORID_NVIDIA 0x12D2
#define PCI_OHCI_VENDORID_NVIDIA2 0x10DE
#define PCI_OHCI_VENDORID_OPTI 0x1045
#define PCI_OHCI_VENDORID_SIS 0x1039
#define PCI_OHCI_VENDORID_SUN 0x108e
#define PCI_OHCI_DEVICEID_ALADDIN_V 0x523710b9
static const char *ohci_device_aladdin_v = "AcerLabs M5237 (Aladdin-V) USB controller";
#define PCI_OHCI_DEVICEID_AMD756 0x740c1022
static const char *ohci_device_amd756 = "AMD-756 USB Controller";
#define PCI_OHCI_DEVICEID_AMD766 0x74141022
static const char *ohci_device_amd766 = "AMD-766 USB Controller";
#define PCI_OHCI_DEVICEID_SB400_1 0x43741002
#define PCI_OHCI_DEVICEID_SB400_2 0x43751002
static const char *ohci_device_sb400 = "ATI SB400 USB Controller";
#define PCI_OHCI_DEVICEID_FIRELINK 0xc8611045
static const char *ohci_device_firelink = "OPTi 82C861 (FireLink) USB controller";
#define PCI_OHCI_DEVICEID_NEC 0x00351033
static const char *ohci_device_nec = "NEC uPD 9210 USB controller";
#define PCI_OHCI_DEVICEID_NFORCE3 0x00d710de
static const char *ohci_device_nforce3 = "nVidia nForce3 USB Controller";
#define PCI_OHCI_DEVICEID_USB0670 0x06701095
static const char *ohci_device_usb0670 = "CMD Tech 670 (USB0670) USB controller";
#define PCI_OHCI_DEVICEID_USB0673 0x06731095
static const char *ohci_device_usb0673 = "CMD Tech 673 (USB0673) USB controller";
#define PCI_OHCI_DEVICEID_SIS5571 0x70011039
static const char *ohci_device_sis5571 = "SiS 5571 USB controller";
#define PCI_OHCI_DEVICEID_KEYLARGO 0x0019106b
static const char *ohci_device_keylargo = "Apple KeyLargo USB controller";
#define PCI_OHCI_DEVICEID_PCIO2USB 0x1103108e
static const char *ohci_device_pcio2usb = "Sun PCIO-2 USB controller";
static const char *ohci_device_generic = "OHCI (generic) USB controller";
#define PCI_OHCI_BASE_REG 0x10
static device_attach_t ohci_pci_attach;
static device_detach_t ohci_pci_detach;
static device_suspend_t ohci_pci_suspend;
static device_resume_t ohci_pci_resume;
static int
ohci_pci_suspend(device_t self)
{
ohci_softc_t *sc = device_get_softc(self);
int err;
err = bus_generic_suspend(self);
if (err)
return err;
ohci_power(PWR_SUSPEND, sc);
return 0;
}
static int
ohci_pci_resume(device_t self)
{
ohci_softc_t *sc = device_get_softc(self);
ohci_power(PWR_RESUME, sc);
bus_generic_resume(self);
return 0;
}
static const char *
ohci_pci_match(device_t self)
{
u_int32_t device_id = pci_get_devid(self);
switch (device_id) {
case PCI_OHCI_DEVICEID_ALADDIN_V:
return (ohci_device_aladdin_v);
case PCI_OHCI_DEVICEID_AMD756:
return (ohci_device_amd756);
case PCI_OHCI_DEVICEID_AMD766:
return (ohci_device_amd766);
case PCI_OHCI_DEVICEID_SB400_1:
case PCI_OHCI_DEVICEID_SB400_2:
return (ohci_device_sb400);
case PCI_OHCI_DEVICEID_USB0670:
return (ohci_device_usb0670);
case PCI_OHCI_DEVICEID_USB0673:
return (ohci_device_usb0673);
case PCI_OHCI_DEVICEID_FIRELINK:
return (ohci_device_firelink);
case PCI_OHCI_DEVICEID_NEC:
return (ohci_device_nec);
case PCI_OHCI_DEVICEID_NFORCE3:
return (ohci_device_nforce3);
case PCI_OHCI_DEVICEID_SIS5571:
return (ohci_device_sis5571);
case PCI_OHCI_DEVICEID_KEYLARGO:
return (ohci_device_keylargo);
case PCI_OHCI_DEVICEID_PCIO2USB:
return (ohci_device_pcio2usb);
default:
if (pci_get_class(self) == PCIC_SERIALBUS
&& pci_get_subclass(self) == PCIS_SERIALBUS_USB
&& pci_get_progif(self) == PCI_INTERFACE_OHCI) {
return (ohci_device_generic);
}
}
return NULL; /* dunno */
}
static int
ohci_pci_probe(device_t self)
{
const char *desc = ohci_pci_match(self);
if (desc) {
device_set_desc(self, desc);
return BUS_PROBE_DEFAULT;
} else {
return ENXIO;
}
}
static int
ohci_pci_attach(device_t self)
{
ohci_softc_t *sc = device_get_softc(self);
int err;
int rid;
/* XXX where does it say so in the spec? */
sc->sc_bus.usbrev = USBREV_1_0;
pci_enable_busmaster(self);
/*
* Some Sun PCIO-2 USB controllers have their intpin register
* bogusly set to 0, although it should be 4. Correct that.
*/
if (pci_get_devid(self) == PCI_OHCI_DEVICEID_PCIO2USB &&
pci_get_intpin(self) == 0)
pci_set_intpin(self, 4);
rid = PCI_CBMEM;
sc->io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (!sc->io_res) {
device_printf(self, "Could not map memory\n");
return ENXIO;
}
sc->iot = rman_get_bustag(sc->io_res);
sc->ioh = rman_get_bushandle(sc->io_res);
rid = 0;
sc->irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid,
RF_SHAREABLE | RF_ACTIVE);
if (sc->irq_res == NULL) {
device_printf(self, "Could not allocate irq\n");
ohci_pci_detach(self);
return ENXIO;
}
sc->sc_bus.bdev = device_add_child(self, "usb", -1);
if (!sc->sc_bus.bdev) {
device_printf(self, "Could not add USB device\n");
ohci_pci_detach(self);
return ENOMEM;
}
device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
/* ohci_pci_match will never return NULL if ohci_pci_probe succeeded */
device_set_desc(sc->sc_bus.bdev, ohci_pci_match(self));
switch (pci_get_vendor(self)) {
case PCI_OHCI_VENDORID_ACERLABS:
sprintf(sc->sc_vendor, "AcerLabs");
break;
case PCI_OHCI_VENDORID_AMD:
sprintf(sc->sc_vendor, "AMD");
break;
case PCI_OHCI_VENDORID_APPLE:
sprintf(sc->sc_vendor, "Apple");
break;
case PCI_OHCI_VENDORID_ATI:
sprintf(sc->sc_vendor, "ATI");
break;
case PCI_OHCI_VENDORID_CMDTECH:
sprintf(sc->sc_vendor, "CMDTECH");
break;
case PCI_OHCI_VENDORID_NEC:
sprintf(sc->sc_vendor, "NEC");
break;
case PCI_OHCI_VENDORID_NVIDIA:
case PCI_OHCI_VENDORID_NVIDIA2:
sprintf(sc->sc_vendor, "nVidia");
break;
case PCI_OHCI_VENDORID_OPTI:
sprintf(sc->sc_vendor, "OPTi");
break;
case PCI_OHCI_VENDORID_SIS:
sprintf(sc->sc_vendor, "SiS");
break;
default:
if (bootverbose)
device_printf(self, "(New OHCI DeviceId=0x%08x)\n",
pci_get_devid(self));
sprintf(sc->sc_vendor, "(0x%04x)", pci_get_vendor(self));
}
err = bus_setup_intr(self, sc->irq_res, INTR_TYPE_BIO, NULL, ohci_intr,
sc, &sc->ih);
if (err) {
device_printf(self, "Could not setup irq, %d\n", err);
sc->ih = NULL;
ohci_pci_detach(self);
return ENXIO;
}
/* Allocate a parent dma tag for DMA maps */
err = bus_dma_tag_create(bus_get_dma_tag(self), 1, 0,
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
BUS_SPACE_MAXSIZE_32BIT, USB_DMA_NSEG, BUS_SPACE_MAXSIZE_32BIT, 0,
NULL, NULL, &sc->sc_bus.parent_dmatag);
if (err) {
device_printf(self, "Could not allocate parent DMA tag (%d)\n",
err);
ohci_pci_detach(self);
return ENXIO;
}
/* Allocate a dma tag for transfer buffers */
err = bus_dma_tag_create(sc->sc_bus.parent_dmatag, 1, 0,
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
BUS_SPACE_MAXSIZE_32BIT, USB_DMA_NSEG, BUS_SPACE_MAXSIZE_32BIT, 0,
busdma_lock_mutex, &Giant, &sc->sc_bus.buffer_dmatag);
if (err) {
device_printf(self, "Could not allocate transfer tag (%d)\n",
err);
ohci_pci_detach(self);
return ENXIO;
}
err = ohci_init(sc);
if (!err) {
sc->sc_flags |= OHCI_SCFLG_DONEINIT;
err = device_probe_and_attach(sc->sc_bus.bdev);
}
if (err) {
device_printf(self, "USB init failed\n");
ohci_pci_detach(self);
return EIO;
}
return 0;
}
static int
ohci_pci_detach(device_t self)
{
ohci_softc_t *sc = device_get_softc(self);
if (sc->sc_flags & OHCI_SCFLG_DONEINIT) {
ohci_detach(sc, 0);
sc->sc_flags &= ~OHCI_SCFLG_DONEINIT;
}
if (sc->sc_bus.parent_dmatag != NULL)
bus_dma_tag_destroy(sc->sc_bus.parent_dmatag);
if (sc->sc_bus.buffer_dmatag != NULL)
bus_dma_tag_destroy(sc->sc_bus.buffer_dmatag);
if (sc->irq_res && sc->ih) {
int err = bus_teardown_intr(self, sc->irq_res, sc->ih);
if (err)
/* XXX or should we panic? */
device_printf(self, "Could not tear down irq, %d\n",
err);
sc->ih = NULL;
}
if (sc->sc_bus.bdev) {
device_delete_child(self, sc->sc_bus.bdev);
sc->sc_bus.bdev = NULL;
}
if (sc->irq_res) {
bus_release_resource(self, SYS_RES_IRQ, 0, sc->irq_res);
sc->irq_res = NULL;
}
if (sc->io_res) {
bus_release_resource(self, SYS_RES_MEMORY, PCI_CBMEM,
sc->io_res);
sc->io_res = NULL;
sc->iot = 0;
sc->ioh = 0;
}
return 0;
}
static device_method_t ohci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ohci_pci_probe),
DEVMETHOD(device_attach, ohci_pci_attach),
DEVMETHOD(device_detach, ohci_pci_detach),
DEVMETHOD(device_suspend, ohci_pci_suspend),
DEVMETHOD(device_resume, ohci_pci_resume),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
/* Bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
{0, 0}
};
static driver_t ohci_driver = {
"ohci",
ohci_methods,
sizeof(ohci_softc_t),
};
static devclass_t ohci_devclass;
DRIVER_MODULE(ohci, pci, ohci_driver, ohci_devclass, 0, 0);
DRIVER_MODULE(ohci, cardbus, ohci_driver, ohci_devclass, 0, 0);