freebsd-nq/sys/i386/isa/apic_vector.s
Steve Passe d1283d9c9d Converted the TEST_LOPRIO code to default.
removed PEND_INTS 1st try
direct call to MPtrylock
1997-07-31 05:42:06 +00:00

471 lines
12 KiB
ArmAsm

/*
* from: vector.s, 386BSD 0.1 unknown origin
* $Id: apic_vector.s,v 1.18 1997/07/30 22:46:49 smp Exp smp $
*/
#include <machine/smp.h>
#include <machine/smptests.h> /** PEND_INTS, various counters */
#include "i386/isa/intr_machdep.h"
/* convert an absolute IRQ# into a bitmask */
#define IRQ_BIT(irq_num) (1 << (irq_num))
/* make an index into the IO APIC from the IRQ# */
#define REDTBL_IDX(irq_num) (0x10 + ((irq_num) * 2))
/*
* 'lazy masking' code suggested by Bruce Evans <bde@zeta.org.au>
*/
#ifdef PEND_INTS
/*
* the 1st version fails because masked edge-triggered INTs are lost
* by the IO APIC. This version tests to see whether we are handling
* an edge or level triggered INT. Level-triggered INTs must still be
* masked as we don't clear the source, and the EOI cycle would allow
* recursive INTs to occur.
*/
#define MAYBE_MASK_IRQ(irq_num) \
lock ; /* MP-safe */ \
btsl $(irq_num),iactive ; /* lazy masking */ \
jc 6f ; /* already active */ \
TRY_ISRLOCK(irq_num) ; /* try to get lock */ \
testl %eax, %eax ; /* did we get it? */ \
jnz 8f ; /* yes, enter kernel */ \
6: ; /* active or locked */ \
IMASK_LOCK ; /* into critical reg */ \
testl $IRQ_BIT(irq_num),_apic_pin_trigger ; \
jz 7f ; /* edge, don't mask */ \
orl $IRQ_BIT(irq_num),_apic_imen ; /* set the mask bit */ \
movl _ioapic,%ecx ; /* ioapic[0] addr */ \
movl $REDTBL_IDX(irq_num),(%ecx) ; /* write the index */ \
movl IOAPIC_WINDOW(%ecx),%eax ; /* current value */ \
orl $IOART_INTMASK,%eax ; /* set the mask */ \
movl %eax,IOAPIC_WINDOW(%ecx) ; /* new value */ \
7: ; \
orl $IRQ_BIT(irq_num), _ipending ; /* set _ipending bit */ \
IMASK_UNLOCK ; /* exit critical reg */ \
movl $0, lapic_eoi ; /* do the EOI */ \
popl %es ; \
popl %ds ; \
popal ; \
addl $4+4,%esp ; \
iret ; \
; \
ALIGN_TEXT ; \
8:
#else /* PEND_INTS */
#define MAYBE_MASK_IRQ(irq_num) \
lock ; /* MP-safe */ \
btsl $(irq_num),iactive ; /* lazy masking */ \
jnc 1f ; /* NOT active */ \
IMASK_LOCK ; /* enter critical reg */\
orl $IRQ_BIT(irq_num),_apic_imen ; /* set the mask bit */ \
movl _ioapic,%ecx ; /* ioapic[0]addr */ \
movl $REDTBL_IDX(irq_num),(%ecx) ; /* write the index */ \
movl IOAPIC_WINDOW(%ecx),%eax ; /* current value */ \
orl $IOART_INTMASK,%eax ; /* set the mask */ \
movl %eax,IOAPIC_WINDOW(%ecx) ; /* new value */ \
orl $IRQ_BIT(irq_num), _ipending ; /* set _ipending bit */ \
movl $0, lapic_eoi ; /* do the EOI */ \
IMASK_UNLOCK ; /* exit critical reg */ \
popl %es ; \
popl %ds ; \
popal ; \
addl $4+4,%esp ; \
iret ; \
; \
ALIGN_TEXT ; \
1: ; \
GET_MPLOCK /* SMP Spin lock */
#endif /* PEND_INTS */
#define MAYBE_UNMASK_IRQ(irq_num) \
cli ; /* must unmask _apic_imen and IO APIC atomically */ \
lock ; /* MP-safe */ \
andl $~IRQ_BIT(irq_num),iactive ; \
IMASK_LOCK ; /* enter critical reg */\
testl $IRQ_BIT(irq_num),_apic_imen ; \
je 9f ; \
andl $~IRQ_BIT(irq_num),_apic_imen ; /* clear mask bit */ \
movl _ioapic,%ecx ; /* ioapic[0]addr */ \
movl $REDTBL_IDX(irq_num),(%ecx) ; /* write the index */ \
movl IOAPIC_WINDOW(%ecx),%eax ; /* current value */ \
andl $~IOART_INTMASK,%eax ; /* clear the mask */ \
movl %eax,IOAPIC_WINDOW(%ecx) ; /* new value */ \
9: ; \
IMASK_UNLOCK ; /* exit critical reg */ \
sti /* XXX _doreti repeats the cli/sti */
/*
* Macros for interrupt interrupt entry, call to handler, and exit.
*/
#define FAST_INTR(irq_num, vec_name) \
.text ; \
SUPERALIGN_TEXT ; \
IDTVEC(vec_name) ; \
pushl %eax ; /* save only call-used registers */ \
pushl %ecx ; \
pushl %edx ; \
pushl %ds ; \
MAYBE_PUSHL_ES ; \
movl $KDSEL,%eax ; \
movl %ax,%ds ; \
MAYBE_MOVW_AX_ES ; \
FAKE_MCOUNT((4+ACTUALLY_PUSHED)*4(%esp)) ; \
GET_ISRLOCK(irq_num) ; \
pushl _intr_unit + (irq_num) * 4 ; \
call *_intr_handler + (irq_num) * 4 ; /* do the work ASAP */ \
movl $0, lapic_eoi ; \
addl $4,%esp ; \
incl _cnt+V_INTR ; /* book-keeping can wait */ \
movl _intr_countp + (irq_num) * 4,%eax ; \
incl (%eax) ; \
movl _cpl,%eax ; /* unmasking pending HWIs or SWIs? */ \
notl %eax ; \
andl _ipending,%eax ; \
jne 2f ; /* yes, maybe handle them */ \
1: ; \
MEXITCOUNT ; \
REL_ISRLOCK(irq_num) ; \
MAYBE_POPL_ES ; \
popl %ds ; \
popl %edx ; \
popl %ecx ; \
popl %eax ; \
iret ; \
; \
ALIGN_TEXT ; \
2: ; \
cmpb $3,_intr_nesting_level ; /* enough stack? */ \
jae 1b ; /* no, return */ \
movl _cpl,%eax ; \
/* XXX next line is probably unnecessary now. */ \
movl $HWI_MASK|SWI_MASK,_cpl ; /* limit nesting ... */ \
incb _intr_nesting_level ; /* ... really limit it ... */ \
sti ; /* to do this as early as possible */ \
MAYBE_POPL_ES ; /* discard most of thin frame ... */ \
popl %ecx ; /* ... original %ds ... */ \
popl %edx ; \
xchgl %eax,4(%esp) ; /* orig %eax; save cpl */ \
pushal ; /* build fat frame (grrr) ... */ \
pushl %ecx ; /* ... actually %ds ... */ \
pushl %es ; \
movl $KDSEL,%eax ; \
movl %ax,%es ; \
movl (2+8+0)*4(%esp),%ecx ; /* %ecx from thin frame ... */ \
movl %ecx,(2+6)*4(%esp) ; /* ... to fat frame ... */ \
movl (2+8+1)*4(%esp),%eax ; /* ... cpl from thin frame */ \
pushl %eax ; \
subl $4,%esp ; /* junk for unit number */ \
MEXITCOUNT ; \
jmp _doreti
#define INTR(irq_num, vec_name) \
.text ; \
SUPERALIGN_TEXT ; \
IDTVEC(vec_name) ; \
pushl $0 ; /* dummy error code */ \
pushl $0 ; /* dummy trap type */ \
pushal ; \
pushl %ds ; /* save data and extra segments ... */ \
pushl %es ; \
movl $KDSEL,%eax ; /* ... and reload with kernel's ... */ \
movl %ax,%ds ; /* ... early for obsolete reasons */ \
movl %ax,%es ; \
MAYBE_MASK_IRQ(irq_num) ; \
movl $0, lapic_eoi ; \
movl _cpl,%eax ; \
testl $IRQ_BIT(irq_num), %eax ; \
jne 3f ; \
incb _intr_nesting_level ; \
__CONCAT(Xresume,irq_num): ; \
FAKE_MCOUNT(12*4(%esp)) ; /* XXX late to avoid dbl cnt */ \
incl _cnt+V_INTR ; /* tally interrupts */ \
movl _intr_countp + (irq_num) * 4,%eax ; \
incl (%eax) ; \
movl _cpl,%eax ; \
pushl %eax ; \
pushl _intr_unit + (irq_num) * 4 ; \
orl _intr_mask + (irq_num) * 4,%eax ; \
movl %eax,_cpl ; \
sti ; \
call *_intr_handler + (irq_num) * 4 ; \
MAYBE_UNMASK_IRQ(irq_num) ; \
MEXITCOUNT ; \
jmp _doreti ; \
; \
ALIGN_TEXT ; \
3: ; \
/* XXX skip mcounting here to avoid double count */ \
orl $IRQ_BIT(irq_num), _ipending ; \
REL_ISRLOCK(irq_num) ; \
popl %es ; \
popl %ds ; \
popal ; \
addl $4+4,%esp ; \
iret
/*
* Handle "spurious INTerrupts".
* Notes:
* This is different than the "spurious INTerrupt" generated by an
* 8259 PIC for missing INTs. See the APIC documentation for details.
* This routine should NOT do an 'EOI' cycle.
*/
.text
SUPERALIGN_TEXT
.globl _Xspuriousint
_Xspuriousint:
#ifdef COUNT_SPURIOUS_INTS
ss
incl _sihits
#endif
/* No EOI cycle used here */
iret
/*
* Handle TLB shootdowns.
*/
.text
SUPERALIGN_TEXT
.globl _Xinvltlb
_Xinvltlb:
pushl %eax
#ifdef COUNT_XINVLTLB_HITS
ss
movl _cpuid, %eax
ss
incl _xhits(,%eax,4)
#endif /* COUNT_XINVLTLB_HITS */
movl %cr3, %eax /* invalidate the TLB */
movl %eax, %cr3
ss /* stack segment, avoid %ds load */
movl $0, lapic_eoi /* End Of Interrupt to APIC */
popl %eax
iret
/*
* Executed by a CPU when it receives an Xcpustop IPI from another CPU,
*
* - Signals its receipt.
* - Waits for permission to restart.
* - Signals its restart.
*/
.text
SUPERALIGN_TEXT
.globl _Xcpustop
_Xcpustop:
pushl %eax
pushl %ds /* save current data segment */
movl $KDSEL, %eax
movl %ax, %ds /* use KERNEL data segment */
movl _cpuid, %eax
#ifdef COUNT_CSHITS
incl _cshits(,%eax,4)
#endif /* COUNT_CSHITS */
ASMPOSTCODE_HI(0x1)
lock
btsl %eax, _stopped_cpus /* stopped_cpus |= (1<<id) */
ASMPOSTCODE_HI(0x2);
1:
btl %eax, _started_cpus /* while (!(started_cpus & (1<<id))) */
jnc 1b
ASMPOSTCODE_HI(0x3)
lock
btrl %eax, _started_cpus /* started_cpus &= ~(1<<id) */
ASMPOSTCODE_HI(0x4)
movl $0, lapic_eoi /* End Of Interrupt to APIC */
popl %ds /* restore previous data segment */
popl %eax
iret
MCOUNT_LABEL(bintr)
FAST_INTR(0,fastintr0)
FAST_INTR(1,fastintr1)
FAST_INTR(2,fastintr2)
FAST_INTR(3,fastintr3)
FAST_INTR(4,fastintr4)
FAST_INTR(5,fastintr5)
FAST_INTR(6,fastintr6)
FAST_INTR(7,fastintr7)
FAST_INTR(8,fastintr8)
FAST_INTR(9,fastintr9)
FAST_INTR(10,fastintr10)
FAST_INTR(11,fastintr11)
FAST_INTR(12,fastintr12)
FAST_INTR(13,fastintr13)
FAST_INTR(14,fastintr14)
FAST_INTR(15,fastintr15)
FAST_INTR(16,fastintr16)
FAST_INTR(17,fastintr17)
FAST_INTR(18,fastintr18)
FAST_INTR(19,fastintr19)
FAST_INTR(20,fastintr20)
FAST_INTR(21,fastintr21)
FAST_INTR(22,fastintr22)
FAST_INTR(23,fastintr23)
INTR(0,intr0)
INTR(1,intr1)
INTR(2,intr2)
INTR(3,intr3)
INTR(4,intr4)
INTR(5,intr5)
INTR(6,intr6)
INTR(7,intr7)
INTR(8,intr8)
INTR(9,intr9)
INTR(10,intr10)
INTR(11,intr11)
INTR(12,intr12)
INTR(13,intr13)
INTR(14,intr14)
INTR(15,intr15)
INTR(16,intr16)
INTR(17,intr17)
INTR(18,intr18)
INTR(19,intr19)
INTR(20,intr20)
INTR(21,intr21)
INTR(22,intr22)
INTR(23,intr23)
MCOUNT_LABEL(eintr)
.data
ihandlers: /* addresses of interrupt handlers */
/* actually resumption addresses for HWI's */
.long Xresume0, Xresume1, Xresume2, Xresume3
.long Xresume4, Xresume5, Xresume6, Xresume7
.long Xresume8, Xresume9, Xresume10, Xresume11
.long Xresume12, Xresume13, Xresume14, Xresume15
.long Xresume16, Xresume17, Xresume18, Xresume19
.long Xresume20, Xresume21, Xresume22, Xresume23
.long swi_tty, swi_net
.long 0, 0, 0, 0
.long _softclock, swi_ast
imasks: /* masks for interrupt handlers */
.space NHWI*4 /* padding; HWI masks are elsewhere */
.long SWI_TTY_MASK, SWI_NET_MASK
.long 0, 0, 0, 0
.long SWI_CLOCK_MASK, SWI_AST_MASK
.globl _ivectors
_ivectors:
.long _Xintr0, _Xintr1, _Xintr2, _Xintr3
.long _Xintr4, _Xintr5, _Xintr6, _Xintr7
.long _Xintr8, _Xintr9, _Xintr10, _Xintr11
.long _Xintr12, _Xintr13, _Xintr14, _Xintr15
.long _Xintr16, _Xintr17, _Xintr18, _Xintr19
.long _Xintr20, _Xintr21, _Xintr22, _Xintr23
/* active flag for lazy masking */
iactive:
.long 0
#ifdef COUNT_SPURIOUS_INTS
.globl _sihits
_sihits:
.long 0
#endif /* COUNT_SPURIOUS_INTS */
#ifdef COUNT_XINVLTLB_HITS
.globl _xhits
_xhits:
.space (NCPU * 4), 0
#endif /* COUNT_XINVLTLB_HITS */
/* variables used by stop_cpus()/restart_cpus()/Xcpustop */
.globl _stopped_cpus, _started_cpus
_stopped_cpus:
.long 0
_started_cpus:
.long 0
#ifdef COUNT_CSHITS
.globl _cshits
_cshits:
.space (NCPU * 4), 0
#endif /* COUNT_CSHITS */
#ifdef PEND_INTS
.globl _apic_pin_trigger
_apic_pin_trigger:
.space (NAPIC * 4), 0
#endif /* PEND_INTS */
/*
* Interrupt counters and names. The format of these and the label names
* must agree with what vmstat expects. The tables are indexed by device
* ids so that we don't have to move the names around as devices are
* attached.
*/
#include "vector.h"
.globl _intrcnt, _eintrcnt
_intrcnt:
.space (NR_DEVICES + ICU_LEN) * 4
_eintrcnt:
.globl _intrnames, _eintrnames
_intrnames:
.ascii DEVICE_NAMES
.asciz "stray irq0"
.asciz "stray irq1"
.asciz "stray irq2"
.asciz "stray irq3"
.asciz "stray irq4"
.asciz "stray irq5"
.asciz "stray irq6"
.asciz "stray irq7"
.asciz "stray irq8"
.asciz "stray irq9"
.asciz "stray irq10"
.asciz "stray irq11"
.asciz "stray irq12"
.asciz "stray irq13"
.asciz "stray irq14"
.asciz "stray irq15"
.asciz "stray irq16"
.asciz "stray irq17"
.asciz "stray irq18"
.asciz "stray irq19"
.asciz "stray irq20"
.asciz "stray irq21"
.asciz "stray irq22"
.asciz "stray irq23"
_eintrnames:
.text