freebsd-nq/contrib/diff/doc/diff.7

.Dd 2015-03-02
.Dt DIFF 7
.Os
.Sh NAME
.Nm diff
.Nd Comparing and Merging Files
.Sh  Comparing and Merging Files
.Sh  Overview
Computer users often find occasion to ask how two files differ. Perhaps one
file is a newer version of the other file. Or maybe the two files started
out as identical copies but were changed by different people.
.Pp
You can use the
.Xr diff
command to show differences between two files, or each corresponding file
in two directories.
.Xr diff
outputs differences between files line by line in any of several formats,
selectable by command line options. This set of differences is often called
a
.Em diff
or
.Em patch .
For files that are identical,
.Xr diff
normally produces no output; for binary (non-text) files,
.Xr diff
normally reports only that they are different.
.Pp
You can use the
.Xr cmp
command to show the byte and line numbers where two files differ.
.Xr cmp
can also show all the bytes that differ between the two files, side by side.
A way to compare two files character by character is the Emacs command
.Li M-x compare-windows .
See Section.Dq Other Window ,
for more information on that command.
.Pp
You can use the
.Xr diff3
command to show differences among three files. When two people have made independent
changes to a common original,
.Xr diff3
can report the differences between the original and the two changed versions,
and can produce a merged file that contains both persons' changes together
with warnings about conflicts.
.Pp
You can use the
.Xr sdiff
command to merge two files interactively.
.Pp
You can use the set of differences produced by
.Xr diff
to distribute updates to text files (such as program source code) to other
people. This method is especially useful when the differences are small compared
to the complete files. Given
.Xr diff
output, you can use the
.Xr patch
program to update, or
.Em patch ,
a copy of the file. If you think of
.Xr diff
as subtracting one file from another to produce their difference, you can
think of
.Xr patch
as adding the difference to one file to reproduce the other.
.Pp
This manual first concentrates on making diffs, and later shows how to use
diffs to update files.
.Pp
GNU
.Xr diff
was written by Paul Eggert, Mike Haertel, David Hayes, Richard Stallman, and
Len Tower. Wayne Davison designed and implemented the unified output format.
The basic algorithm is described by Eugene W. Myers in \(lqAn O(ND) Difference
Algorithm and its Variations\(rq,
.Em Algorithmica
Vol. 1 No. 2, 1986, pp. 251--266; and in \(lqA File Comparison Program\(rq, Webb Miller
and Eugene W. Myers,
.Em Software---Practice and Experience
Vol. 15 No. 11, 1985, pp. 1025--1040. The algorithm was independently discovered
as described by E. Ukkonen in \(lqAlgorithms for Approximate String Matching\(rq,
.Em Information and Control
Vol. 64, 1985, pp. 100--118. Unless the
.Op --minimal
option is used,
.Xr diff
uses a heuristic by Paul Eggert that limits the cost to O(N^1.5 log N) at
the price of producing suboptimal output for large inputs with many differences.
Related algorithms are surveyed by Alfred V. Aho in section 6.3 of \(lqAlgorithms
for Finding Patterns in Strings\(rq,
.Em Handbook of Theoretical Computer Science
(Jan Van Leeuwen, ed.), Vol. A,
.Em Algorithms and Complexity ,
Elsevier/MIT Press, 1990, pp. 255--300.
.Pp
GNU
.Xr diff3
was written by Randy Smith. GNU
.Xr sdiff
was written by Thomas Lord. GNU
.Xr cmp
was written by Torbj\(:orn Granlund and David MacKenzie.
.Pp
GNU
.Xr patch
was written mainly by Larry Wall and Paul Eggert; several GNU enhancements
were contributed by Wayne Davison and David MacKenzie. Parts of this manual
are adapted from a manual page written by Larry Wall, with his permission.
.Pp
.Sh  What Comparison Means
There are several ways to think about the differences between two files. One
way to think of the differences is as a series of lines that were deleted
from, inserted in, or changed in one file to produce the other file.
.Xr diff
compares two files line by line, finds groups of lines that differ, and reports
each group of differing lines. It can report the differing lines in several
formats, which have different purposes.
.Pp
GNU
.Xr diff
can show whether files are different without detailing the differences. It
also provides ways to suppress certain kinds of differences that are not important
to you. Most commonly, such differences are changes in the amount of white
space between words or lines.
.Xr diff
also provides ways to suppress differences in alphabetic case or in lines
that match a regular expression that you provide. These options can accumulate;
for example, you can ignore changes in both white space and alphabetic case.
.Pp
Another way to think of the differences between two files is as a sequence
of pairs of bytes that can be either identical or different.
.Xr cmp
reports the differences between two files byte by byte, instead of line by
line. As a result, it is often more useful than
.Xr diff
for comparing binary files. For text files,
.Xr cmp
is useful mainly when you want to know only whether two files are identical,
or whether one file is a prefix of the other.
.Pp
To illustrate the effect that considering changes byte by byte can have compared
with considering them line by line, think of what happens if a single newline
character is added to the beginning of a file. If that file is then compared
with an otherwise identical file that lacks the newline at the beginning,
.Xr diff
will report that a blank line has been added to the file, while
.Xr cmp
will report that almost every byte of the two files differs.
.Pp
.Xr diff3
normally compares three input files line by line, finds groups of lines that
differ, and reports each group of differing lines. Its output is designed
to make it easy to inspect two different sets of changes to the same file.
.Pp
.Ss  Hunks
When comparing two files,
.Xr diff
finds sequences of lines common to both files, interspersed with groups of
differing lines called
.Em hunks .
Comparing two identical files yields one sequence of common lines and no hunks,
because no lines differ. Comparing two entirely different files yields no
common lines and one large hunk that contains all lines of both files. In
general, there are many ways to match up lines between two given files.
.Xr diff
tries to minimize the total hunk size by finding large sequences of common
lines interspersed with small hunks of differing lines.
.Pp
For example, suppose the file
.Pa F
contains the three lines
.Li a ,
.Li b ,
.Li c ,
and the file
.Pa G
contains the same three lines in reverse order
.Li c ,
.Li b ,
.Li a .
If
.Xr diff
finds the line
.Li c
as common, then the command
.Li diff F G
produces this output:
.Pp
.Bd -literal -offset indent
1,2d0
< a
< b
3a2,3
> b
> a
.Ed
.Pp
But if
.Xr diff
notices the common line
.Li b
instead, it produces this output:
.Pp
.Bd -literal -offset indent
1c1
< a
---
> c
3c3
< c
---
> a
.Ed
.Pp
It is also possible to find
.Li a
as the common line.
.Xr diff
does not always find an optimal matching between the files; it takes shortcuts
to run faster. But its output is usually close to the shortest possible. You
can adjust this tradeoff with the
.Op -d
or
.Op --minimal
option (see Section
.Dq diff Performance ) .
.Pp
.Ss  Suppressing Differences in Blank and Tab Spacing
The
.Op -E
or
.Op --ignore-tab-expansion
option ignores the distinction between tabs and spaces on input. A tab is
considered to be equivalent to the number of spaces to the next tab stop (see Section
.Dq Tabs ) .
.Pp
The
.Op -b
or
.Op --ignore-space-change
option is stronger. It ignores white space at line end, and considers all
other sequences of one or more white space characters within a line to be
equivalent. With this option,
.Xr diff
considers the following two lines to be equivalent, where
.Li $
denotes the line end:
.Pp
.Bd -literal -offset indent
Here lyeth  muche rychnesse  in lytell space.   -- John Heywood$
Here lyeth muche rychnesse in lytell space. -- John Heywood   $
.Ed
.Pp
The
.Op -w
or
.Op --ignore-all-space
option is stronger still. It ignores differences even if one line has white
space where the other line has none.
.Em White space
characters include tab, newline, vertical tab, form feed, carriage return,
and space; some locales may define additional characters to be white space.
With this option,
.Xr diff
considers the following two lines to be equivalent, where
.Li $
denotes the line end and
.Li ^M
denotes a carriage return:
.Pp
.Bd -literal -offset indent
Here lyeth  muche  rychnesse in lytell space.--  John Heywood$
  He relyeth much erychnes  seinly tells pace.  --John Heywood   ^M$
.Ed
.Pp
.Ss  Suppressing Differences Whose Lines Are All Blank
The
.Op -B
or
.Op --ignore-blank-lines
option ignores changes that consist entirely of blank lines. With this option,
for example, a file containing
.Bd -literal -offset indent
1.  A point is that which has no part.

2.  A line is breadthless length.
-- Euclid, The Elements, I
.Ed
is considered identical to a file containing
.Bd -literal -offset indent
1.  A point is that which has no part.
2.  A line is breadthless length.


-- Euclid, The Elements, I
.Ed
.Pp
Normally this option affects only lines that are completely empty, but if
you also specify the
.Op -b
or
.Op --ignore-space-change
option, or the
.Op -w
or
.Op --ignore-all-space
option, lines are also affected if they look empty but contain white space.
In other words,
.Op -B
is equivalent to
.Li -I '^$'
by default, but it is equivalent to
.Op -I '^[[:space:]]*$'
if
.Op -b
or
.Op -w
is also specified.
.Pp
.Ss  Suppressing Differences Whose Lines All Match a Regular Expression
To ignore insertions and deletions of lines that match a
.Xr grep
-style regular expression, use the
.Op -I Va regexp
or
.Op --ignore-matching-lines= Va regexp
option. You should escape regular expressions that contain shell metacharacters
to prevent the shell from expanding them. For example,
.Li diff -I '^[[:digit:]]'
ignores all changes to lines beginning with a digit.
.Pp
However,
.Op -I
only ignores the insertion or deletion of lines that contain the regular expression
if every changed line in the hunk---every insertion and every deletion---matches
the regular expression. In other words, for each nonignorable change,
.Xr diff
prints the complete set of changes in its vicinity, including the ignorable
ones.
.Pp
You can specify more than one regular expression for lines to ignore by using
more than one
.Op -I
option.
.Xr diff
tries to match each line against each regular expression.
.Pp
.Ss  Suppressing Case Differences
GNU
.Xr diff
can treat lower case letters as equivalent to their upper case counterparts,
so that, for example, it considers
.Li Funky Stuff ,
.Li funky STUFF ,
and
.Li fUNKy stuFf
to all be the same. To request this, use the
.Op -i
or
.Op --ignore-case
option.
.Pp
.Ss  Summarizing Which Files Differ
When you only want to find out whether files are different, and you don't
care what the differences are, you can use the summary output format. In this
format, instead of showing the differences between the files,
.Xr diff
simply reports whether files differ. The
.Op -q
or
.Op --brief
option selects this output format.
.Pp
This format is especially useful when comparing the contents of two directories.
It is also much faster than doing the normal line by line comparisons, because
.Xr diff
can stop analyzing the files as soon as it knows that there are any differences.
.Pp
You can also get a brief indication of whether two files differ by using
.Xr cmp .
For files that are identical,
.Xr cmp
produces no output. When the files differ, by default,
.Xr cmp
outputs the byte and line number where the first difference occurs, or reports
that one file is a prefix of the other. You can use the
.Op -s ,
.Op --quiet ,
or
.Op --silent
option to suppress that information, so that
.Xr cmp
produces no output and reports whether the files differ using only its exit
status (see Section
.Dq Invoking cmp ) .
.Pp
Unlike
.Xr diff ,
.Xr cmp
cannot compare directories; it can only compare two files.
.Pp
.Ss  Binary Files and Forcing Text Comparisons
If
.Xr diff
thinks that either of the two files it is comparing is binary (a non-text
file), it normally treats that pair of files much as if the summary output
format had been selected (see Section
.Dq Brief ) ,
and reports only that the binary files are different. This is because line
by line comparisons are usually not meaningful for binary files.
.Pp
.Xr diff
determines whether a file is text or binary by checking the first few bytes
in the file; the exact number of bytes is system dependent, but it is typically
several thousand. If every byte in that part of the file is non-null,
.Xr diff
considers the file to be text; otherwise it considers the file to be binary.
.Pp
Sometimes you might want to force
.Xr diff
to consider files to be text. For example, you might be comparing text files
that contain null characters;
.Xr diff
would erroneously decide that those are non-text files. Or you might be comparing
documents that are in a format used by a word processing system that uses
null characters to indicate special formatting. You can force
.Xr diff
to consider all files to be text files, and compare them line by line, by
using the
.Op -a
or
.Op --text
option. If the files you compare using this option do not in fact contain
text, they will probably contain few newline characters, and the
.Xr diff
output will consist of hunks showing differences between long lines of whatever
characters the files contain.
.Pp
You can also force
.Xr diff
to report only whether files differ (but not how). Use the
.Op -q
or
.Op --brief
option for this.
.Pp
Normally, differing binary files count as trouble because the resulting
.Xr diff
output does not capture all the differences. This trouble causes
.Xr diff
to exit with status 2. However, this trouble cannot occur with the
.Op -a
or
.Op --text
option, or with the
.Op -q
or
.Op --brief
option, as these options both cause
.Xr diff
to generate a form of output that represents differences as requested.
.Pp
In operating systems that distinguish between text and binary files,
.Xr diff
normally reads and writes all data as text. Use the
.Op --binary
option to force
.Xr diff
to read and write binary data instead. This option has no effect on a POSIX-compliant
system like GNU or traditional Unix. However, many personal computer operating
systems represent the end of a line with a carriage return followed by a newline.
On such systems,
.Xr diff
normally ignores these carriage returns on input and generates them at the
end of each output line, but with the
.Op --binary
option
.Xr diff
treats each carriage return as just another input character, and does not
generate a carriage return at the end of each output line. This can be useful
when dealing with non-text files that are meant to be interchanged with POSIX-compliant
systems.
.Pp
The
.Op --strip-trailing-cr
causes
.Xr diff
to treat input lines that end in carriage return followed by newline as if
they end in plain newline. This can be useful when comparing text that is
imperfectly imported from many personal computer operating systems. This option
affects how lines are read, which in turn affects how they are compared and
output.
.Pp
If you want to compare two files byte by byte, you can use the
.Xr cmp
program with the
.Op -l
or
.Op --verbose
option to show the values of each differing byte in the two files. With GNU
.Xr cmp ,
you can also use the
.Op -b
or
.Op --print-bytes
option to show the ASCII representation of those bytes.See Section
.Dq Invoking cmp ,
for more information.
.Pp
If
.Xr diff3
thinks that any of the files it is comparing is binary (a non-text file),
it normally reports an error, because such comparisons are usually not useful.
.Xr diff3
uses the same test as
.Xr diff
to decide whether a file is binary. As with
.Xr diff ,
if the input files contain a few non-text bytes but otherwise are like text
files, you can force
.Xr diff3
to consider all files to be text files and compare them line by line by using
the
.Op -a
or
.Op --text
option.
.Pp
.Sh  Xr diff Output Formats
.Xr diff
has several mutually exclusive options for output format. The following sections
describe each format, illustrating how
.Xr diff
reports the differences between two sample input files.
.Pp
.Ss  Two Sample Input Files
Here are two sample files that we will use in numerous examples to illustrate
the output of
.Xr diff
and how various options can change it.
.Pp
This is the file
.Pa lao :
.Pp
.Bd -literal -offset indent
The Way that can be told of is not the eternal Way;
The name that can be named is not the eternal name.
The Nameless is the origin of Heaven and Earth;
The Named is the mother of all things.
Therefore let there always be non-being,
  so we may see their subtlety,
And let there always be being,
  so we may see their outcome.
The two are the same,
But after they are produced,
  they have different names.
.Ed
.Pp
This is the file
.Pa tzu :
.Pp
.Bd -literal -offset indent
The Nameless is the origin of Heaven and Earth;
The named is the mother of all things.

Therefore let there always be non-being,
  so we may see their subtlety,
And let there always be being,
  so we may see their outcome.
The two are the same,
But after they are produced,
  they have different names.
They both may be called deep and profound.
Deeper and more profound,
The door of all subtleties!
.Ed
.Pp
In this example, the first hunk contains just the first two lines of
.Pa lao ,
the second hunk contains the fourth line of
.Pa lao
opposing the second and third lines of
.Pa tzu ,
and the last hunk contains just the last three lines of
.Pa tzu .
.Pp
.Ss  Showing Differences in Their Context
Usually, when you are looking at the differences between files, you will also
want to see the parts of the files near the lines that differ, to help you
understand exactly what has changed. These nearby parts of the files are called
the
.Em context .
.Pp
GNU
.Xr diff
provides two output formats that show context around the differing lines:
.Em context format
and
.Em unified format .
It can optionally show in which function or section of the file the differing
lines are found.
.Pp
If you are distributing new versions of files to other people in the form
of
.Xr diff
output, you should use one of the output formats that show context so that
they can apply the diffs even if they have made small changes of their own
to the files.
.Xr patch
can apply the diffs in this case by searching in the files for the lines of
context around the differing lines; if those lines are actually a few lines
away from where the diff says they are,
.Xr patch
can adjust the line numbers accordingly and still apply the diff correctly.See Section
.Dq Imperfect ,
for more information on using
.Xr patch
to apply imperfect diffs.
.Pp
.Em  Context Format
.Pp
The context output format shows several lines of context around the lines
that differ. It is the standard format for distributing updates to source
code.
.Pp
To select this output format, use the
.Op -C Va lines ,
.Op --context[= Va lines] ,
or
.Op -c
option. The argument
.Va lines
that some of these options take is the number of lines of context to show.
If you do not specify
.Va lines ,
it defaults to three. For proper operation,
.Xr patch
typically needs at least two lines of context.
.Pp
.No  An Example of Context Format
.Pp
Here is the output of
.Li diff -c lao tzu
(see Section
.Dq Sample diff Input ,
for the complete contents of the two files). Notice that up to three lines
that are not different are shown around each line that is different; they
are the context lines. Also notice that the first two hunks have run together,
because their contents overlap.
.Pp
.Bd -literal -offset indent
*** lao	2002-02-21 23:30:39.942229878 -0800
--- tzu	2002-02-21 23:30:50.442260588 -0800
***************
*** 1,7 ****
- The Way that can be told of is not the eternal Way;
- The name that can be named is not the eternal name.
  The Nameless is the origin of Heaven and Earth;
! The Named is the mother of all things.
  Therefore let there always be non-being,
    so we may see their subtlety,
  And let there always be being,
--- 1,6 ----
  The Nameless is the origin of Heaven and Earth;
! The named is the mother of all things.
! 
  Therefore let there always be non-being,
    so we may see their subtlety,
  And let there always be being,
***************
*** 9,11 ****
--- 8,13 ----
  The two are the same,
  But after they are produced,
    they have different names.
+ They both may be called deep and profound.
+ Deeper and more profound,
+ The door of all subtleties!
.Ed
.Pp
.No  An Example of Context Format with Less Context
.Pp
Here is the output of
.Li diff -C 1 lao tzu
(see Section
.Dq Sample diff Input ,
for the complete contents of the two files). Notice that at most one context
line is reported here.
.Pp
.Bd -literal -offset indent
*** lao	2002-02-21 23:30:39.942229878 -0800
--- tzu	2002-02-21 23:30:50.442260588 -0800
***************
*** 1,5 ****
- The Way that can be told of is not the eternal Way;
- The name that can be named is not the eternal name.
  The Nameless is the origin of Heaven and Earth;
! The Named is the mother of all things.
  Therefore let there always be non-being,
--- 1,4 ----
  The Nameless is the origin of Heaven and Earth;
! The named is the mother of all things.
! 
  Therefore let there always be non-being,
***************
*** 11 ****
--- 10,13 ----
    they have different names.
+ They both may be called deep and profound.
+ Deeper and more profound,
+ The door of all subtleties!
.Ed
.Pp
.No  Detailed Description of Context Format
.Pp
The context output format starts with a two-line header, which looks like
this:
.Pp
.Bd -literal -offset indent
*** from-file from-file-modification-time
--- to-file to-file-modification time
.Ed
.Pp
The time stamp normally looks like
.Li 2002-02-21 23:30:39.942229878 -0800
to indicate the date, time with fractional seconds, and time zone in
.Lk ftp://ftp.isi.edu/in-notes/rfc2822.txt .
(The fractional seconds are omitted on hosts that do not support fractional
time stamps.) However, a traditional time stamp like
.Li Thu Feb 21 23:30:39 2002
is used if the
.Ev LC_TIME
locale category is either
.Li C
or
.Li POSIX .
.Pp
You can change the header's content with the
.Op --label= Va label
option; see Alternate Names.
.Pp
Next come one or more hunks of differences; each hunk shows one area where
the files differ. Context format hunks look like this:
.Pp
.Bd -literal -offset indent
***************
*** from-file-line-numbers ****
  from-file-line
  from-file-line...
--- to-file-line-numbers ----
  to-file-line
  to-file-line...
.Ed
.Pp
If a hunk contains two or more lines, its line numbers look like
.Li  Va start, Va end .
Otherwise only its end line number appears. An empty hunk is considered to
end at the line that precedes the hunk.
.Pp
The lines of context around the lines that differ start with two space characters.
The lines that differ between the two files start with one of the following
indicator characters, followed by a space character:
.Pp
.Bl -tag -width Ds
.It  !
A line that is part of a group of one or more lines that changed between the
two files. There is a corresponding group of lines marked with
.Li !
in the part of this hunk for the other file.
.Pp
.It  +
An \(lqinserted\(rq line in the second file that corresponds to nothing in the first
file.
.Pp
.It  -
A \(lqdeleted\(rq line in the first file that corresponds to nothing in the second
file.
.El
.Pp
If all of the changes in a hunk are insertions, the lines of
.Va from-file
are omitted. If all of the changes are deletions, the lines of
.Va to-file
are omitted.
.Pp
.Em  Unified Format
.Pp
The unified output format is a variation on the context format that is more
compact because it omits redundant context lines. To select this output format,
use the
.Op -U Va lines ,
.Op --unified[= Va lines] ,
or
.Op -u
option. The argument
.Va lines
is the number of lines of context to show. When it is not given, it defaults
to three.
.Pp
At present, only GNU
.Xr diff
can produce this format and only GNU
.Xr patch
can automatically apply diffs in this format. For proper operation,
.Xr patch
typically needs at least three lines of context.
.Pp
.No  An Example of Unified Format
.Pp
Here is the output of the command
.Li diff -u lao tzu
(see Section
.Dq Sample diff Input ,
for the complete contents of the two files):
.Pp
.Bd -literal -offset indent
--- lao	2002-02-21 23:30:39.942229878 -0800
+++ tzu	2002-02-21 23:30:50.442260588 -0800
@@ -1,7 +1,6 @@
-The Way that can be told of is not the eternal Way;
-The name that can be named is not the eternal name.
 The Nameless is the origin of Heaven and Earth;
-The Named is the mother of all things.
+The named is the mother of all things.
+
 Therefore let there always be non-being,
   so we may see their subtlety,
 And let there always be being,
@@ -9,3 +8,6 @@
 The two are the same,
 But after they are produced,
   they have different names.
+They both may be called deep and profound.
+Deeper and more profound,
+The door of all subtleties!
.Ed
.Pp
.No  Detailed Description of Unified Format
.Pp
The unified output format starts with a two-line header, which looks like
this:
.Pp
.Bd -literal -offset indent
--- from-file from-file-modification-time
+++ to-file to-file-modification-time
.Ed
.Pp
The time stamp looks like
.Li 2002-02-21 23:30:39.942229878 -0800
to indicate the date, time with fractional seconds, and time zone. The fractional
seconds are omitted on hosts that do not support fractional time stamps.
.Pp
You can change the header's content with the
.Op --label= Va label
option; seeSee Section
.Dq Alternate Names .
.Pp
Next come one or more hunks of differences; each hunk shows one area where
the files differ. Unified format hunks look like this:
.Pp
.Bd -literal -offset indent
@@ from-file-line-numbers to-file-line-numbers @@
 line-from-either-file
 line-from-either-file...
.Ed
.Pp
If a hunk contains just one line, only its start line number appears. Otherwise
its line numbers look like
.Li  Va start, Va count .
An empty hunk is considered to start at the line that follows the hunk.
.Pp
If a hunk and its context contain two or more lines, its line numbers look
like
.Li  Va start, Va count .
Otherwise only its end line number appears. An empty hunk is considered to
end at the line that precedes the hunk.
.Pp
The lines common to both files begin with a space character. The lines that
actually differ between the two files have one of the following indicator
characters in the left print column:
.Pp
.Bl -tag -width Ds
.It  +
A line was added here to the first file.
.Pp
.It  -
A line was removed here from the first file.
.El
.Pp
.Em  Showing Which Sections Differences Are in
.Pp
Sometimes you might want to know which part of the files each change falls
in. If the files are source code, this could mean which function was changed.
If the files are documents, it could mean which chapter or appendix was changed.
GNU
.Xr diff
can show this by displaying the nearest section heading line that precedes
the differing lines. Which lines are \(lqsection headings\(rq is determined by a regular
expression.
.Pp
.No  Showing Lines That Match Regular Expressions
.Pp
To show in which sections differences occur for files that are not source
code for C or similar languages, use the
.Op -F Va regexp
or
.Op --show-function-line= Va regexp
option.
.Xr diff
considers lines that match the
.Xr grep
-style regular expression
.Va regexp
to be the beginning of a section of the file. Here are suggested regular expressions
for some common languages:
.Pp
.Bl -tag -width Ds
.It  ^[[:alpha:]$_]
C, C++, Prolog
.It  ^(
Lisp
.It  ^@node
Texinfo
.El
.Pp
This option does not automatically select an output format; in order to use
it, you must select the context format (see Section
.Dq Context Format )
or unified format (see Section
.Dq Unified Format ) .
In other output formats it has no effect.
.Pp
The
.Op -F
or
.Op --show-function-line
option finds the nearest unchanged line that precedes each hunk of differences
and matches the given regular expression. Then it adds that line to the end
of the line of asterisks in the context format, or to the
.Li @@
line in unified format. If no matching line exists, this option leaves the
output for that hunk unchanged. If that line is more than 40 characters long,
it outputs only the first 40 characters. You can specify more than one regular
expression for such lines;
.Xr diff
tries to match each line against each regular expression, starting with the
last one given. This means that you can use
.Op -p
and
.Op -F
together, if you wish.
.Pp
.No  Showing C Function Headings
.Pp
To show in which functions differences occur for C and similar languages,
you can use the
.Op -p
or
.Op --show-c-function
option. This option automatically defaults to the context output format (see Section
.Dq Context Format ) ,
with the default number of lines of context. You can override that number
with
.Op -C Va lines
elsewhere in the command line. You can override both the format and the number
with
.Op -U Va lines
elsewhere in the command line.
.Pp
The
.Op -p
or
.Op --show-c-function
option is equivalent to
.Op -F '^[[:alpha:]$_]'
if the unified format is specified, otherwise
.Op -c -F '^[[:alpha:]$_]'
(see Section
.Dq Specified Headings ) .
GNU
.Xr diff
provides this option for the sake of convenience.
.Pp
.Em  Showing Alternate File Names
.Pp
If you are comparing two files that have meaningless or uninformative names,
you might want
.Xr diff
to show alternate names in the header of the context and unified output formats.
To do this, use the
.Op --label= Va label
option. The first time you give this option, its argument replaces the name
and date of the first file in the header; the second time, its argument replaces
the name and date of the second file. If you give this option more than twice,
.Xr diff
reports an error. The
.Op --label
option does not affect the file names in the
.Xr pr
header when the
.Op -l
or
.Op --paginate
option is used (see Section
.Dq Pagination ) .
.Pp
Here are the first two lines of the output from
.Li diff -C 2 --label=original --label=modified lao tzu :
.Pp
.Bd -literal -offset indent
*** original
--- modified
.Ed
.Pp
.Ss  Showing Differences Side by Side
.Xr diff
can produce a side by side difference listing of two files. The files are
listed in two columns with a gutter between them. The gutter contains one
of the following markers:
.Pp
.Bl -tag -width Ds
.It  white space
The corresponding lines are in common. That is, either the lines are identical,
or the difference is ignored because of one of the
.Op --ignore
options (see Section
.Dq White Space ) .
.Pp
.It  Li |
The corresponding lines differ, and they are either both complete or both
incomplete.
.Pp
.It  Li <
The files differ and only the first file contains the line.
.Pp
.It  Li >
The files differ and only the second file contains the line.
.Pp
.It  Li (
Only the first file contains the line, but the difference is ignored.
.Pp
.It  Li )
Only the second file contains the line, but the difference is ignored.
.Pp
.It  Li \e
The corresponding lines differ, and only the first line is incomplete.
.Pp
.It  Li /
The corresponding lines differ, and only the second line is incomplete.
.El
.Pp
Normally, an output line is incomplete if and only if the lines that it contains
are incomplete;See Section
.Dq Incomplete Lines .
However, when an output line represents two differing lines, one might be
incomplete while the other is not. In this case, the output line is complete,
but its the gutter is marked
.Li \e
if the first line is incomplete,
.Li /
if the second line is.
.Pp
Side by side format is sometimes easiest to read, but it has limitations.
It generates much wider output than usual, and truncates lines that are too
long to fit. Also, it relies on lining up output more heavily than usual,
so its output looks particularly bad if you use varying width fonts, nonstandard
tab stops, or nonprinting characters.
.Pp
You can use the
.Xr sdiff
command to interactively merge side by side differences.See Section
.Dq Interactive Merging ,
for more information on merging files.
.Pp
.Em  Controlling Side by Side Format
.Pp
The
.Op -y
or
.Op --side-by-side
option selects side by side format. Because side by side output lines contain
two input lines, the output is wider than usual: normally 130 print columns,
which can fit onto a traditional printer line. You can set the width of the
output with the
.Op -W Va columns
or
.Op --width= Va columns
option. The output is split into two halves of equal width, separated by a
small gutter to mark differences; the right half is aligned to a tab stop
so that tabs line up. Input lines that are too long to fit in half of an output
line are truncated for output.
.Pp
The
.Op --left-column
option prints only the left column of two common lines. The
.Op --suppress-common-lines
option suppresses common lines entirely.
.Pp
.Em  An Example of Side by Side Format
.Pp
Here is the output of the command
.Li diff -y -W 72 lao tzu
(see Section
.Dq Sample diff Input ,
for the complete contents of the two files).
.Pp
.Bd -literal -offset indent
The Way that can be told of is n   <
The name that can be named is no   <
The Nameless is the origin of He        The Nameless is the origin of He
The Named is the mother of all t   |    The named is the mother of all t
                                   >
Therefore let there always be no        Therefore let there always be no
  so we may see their subtlety,           so we may see their subtlety,
And let there always be being,          And let there always be being,
  so we may see their outcome.            so we may see their outcome.
The two are the same,                   The two are the same,
But after they are produced,            But after they are produced,
  they have different names.              they have different names.
                                   >    They both may be called deep and
                                   >    Deeper and more profound,
                                   >    The door of all subtleties!
.Ed
.Pp
.Ss  Showing Differences Without Context
The \(lqnormal\(rq
.Xr diff
output format shows each hunk of differences without any surrounding context.
Sometimes such output is the clearest way to see how lines have changed, without
the clutter of nearby unchanged lines (although you can get similar results
with the context or unified formats by using 0 lines of context). However,
this format is no longer widely used for sending out patches; for that purpose,
the context format (see Section
.Dq Context Format )
and the unified format (see Section
.Dq Unified Format )
are superior. Normal format is the default for compatibility with older versions
of
.Xr diff
and the POSIX standard. Use the
.Op --normal
option to select this output format explicitly.
.Pp
.Em  An Example of Normal Format
.Pp
Here is the output of the command
.Li diff lao tzu
(see Section
.Dq Sample diff Input ,
for the complete contents of the two files). Notice that it shows only the
lines that are different between the two files.
.Pp
.Bd -literal -offset indent
1,2d0
< The Way that can be told of is not the eternal Way;
< The name that can be named is not the eternal name.
4c2,3
< The Named is the mother of all things.
---
> The named is the mother of all things.
> 
11a11,13
> They both may be called deep and profound.
> Deeper and more profound,
> The door of all subtleties!
.Ed
.Pp
.Em  Detailed Description of Normal Format
.Pp
The normal output format consists of one or more hunks of differences; each
hunk shows one area where the files differ. Normal format hunks look like
this:
.Pp
.Bd -literal -offset indent
change-command
< from-file-line
< from-file-line...
---
> to-file-line
> to-file-line...
.Ed
.Pp
There are three types of change commands. Each consists of a line number or
comma-separated range of lines in the first file, a single character indicating
the kind of change to make, and a line number or comma-separated range of
lines in the second file. All line numbers are the original line numbers in
each file. The types of change commands are:
.Pp
.Bl -tag -width Ds
.It  Va la Va r
Add the lines in range
.Va r
of the second file after line
.Va l
of the first file. For example,
.Li 8a12,15
means append lines 12--15 of file 2 after line 8 of file 1; or, if changing
file 2 into file 1, delete lines 12--15 of file 2.
.Pp
.It  Va fc Va t
Replace the lines in range
.Va f
of the first file with lines in range
.Va t
of the second file. This is like a combined add and delete, but more compact.
For example,
.Li 5,7c8,10
means change lines 5--7 of file 1 to read as lines 8--10 of file 2; or, if
changing file 2 into file 1, change lines 8--10 of file 2 to read as lines
5--7 of file 1.
.Pp
.It  Va rd Va l
Delete the lines in range
.Va r
from the first file; line
.Va l
is where they would have appeared in the second file had they not been deleted.
For example,
.Li 5,7d3
means delete lines 5--7 of file 1; or, if changing file 2 into file 1, append
lines 5--7 of file 1 after line 3 of file 2.
.El
.Pp
.Ss  Making Edit Scripts
Several output modes produce command scripts for editing
.Va from-file
to produce
.Va to-file .
.Pp
.Em  Xr ed Scripts
.Pp
.Xr diff
can produce commands that direct the
.Xr ed
text editor to change the first file into the second file. Long ago, this
was the only output mode that was suitable for editing one file into another
automatically; today, with
.Xr patch ,
it is almost obsolete. Use the
.Op -e
or
.Op --ed
option to select this output format.
.Pp
Like the normal format (see Section
.Dq Normal ) ,
this output format does not show any context; unlike the normal format, it
does not include the information necessary to apply the diff in reverse (to
produce the first file if all you have is the second file and the diff).
.Pp
If the file
.Pa d
contains the output of
.Li diff -e old new ,
then the command
.Li (cat d && echo w) | ed - old
edits
.Pa old
to make it a copy of
.Pa new .
More generally, if
.Pa d1 ,
.Pa d2 ,
\&...,
.Pa dN
contain the outputs of
.Li diff -e old new1 ,
.Li diff -e new1 new2 ,
\&...,
.Li diff -e newN-1 newN ,
respectively, then the command
.Li (cat d1 d2 ... dN && echo w) | ed - old
edits
.Pa old
to make it a copy of
.Pa newN .
.Pp
.No  Example Xr ed Script
.Pp
Here is the output of
.Li diff -e lao tzu
(see Section
.Dq Sample diff Input ,
for the complete contents of the two files):
.Pp
.Bd -literal -offset indent
11a
They both may be called deep and profound.
Deeper and more profound,
The door of all subtleties!
\&.
4c
The named is the mother of all things.

\&.
1,2d
.Ed
.Pp
.No  Detailed Description of Xr ed Format
.Pp
The
.Xr ed
output format consists of one or more hunks of differences. The changes closest
to the ends of the files come first so that commands that change the number
of lines do not affect how
.Xr ed
interprets line numbers in succeeding commands.
.Xr ed
format hunks look like this:
.Pp
.Bd -literal -offset indent
change-command
to-file-line
to-file-line...
\&.
.Ed
.Pp
Because
.Xr ed
uses a single period on a line to indicate the end of input, GNU
.Xr diff
protects lines of changes that contain a single period on a line by writing
two periods instead, then writing a subsequent
.Xr ed
command to change the two periods into one. The
.Xr ed
format cannot represent an incomplete line, so if the second file ends in
a changed incomplete line,
.Xr diff
reports an error and then pretends that a newline was appended.
.Pp
There are three types of change commands. Each consists of a line number or
comma-separated range of lines in the first file and a single character indicating
the kind of change to make. All line numbers are the original line numbers
in the file. The types of change commands are:
.Pp
.Bl -tag -width Ds
.It  Va la
Add text from the second file after line
.Va l
in the first file. For example,
.Li 8a
means to add the following lines after line 8 of file 1.
.Pp
.It  Va rc
Replace the lines in range
.Va r
in the first file with the following lines. Like a combined add and delete,
but more compact. For example,
.Li 5,7c
means change lines 5--7 of file 1 to read as the text file 2.
.Pp
.It  Va rd
Delete the lines in range
.Va r
from the first file. For example,
.Li 5,7d
means delete lines 5--7 of file 1.
.El
.Pp
.Em  Forward Xr ed Scripts
.Pp
.Xr diff
can produce output that is like an
.Xr ed
script, but with hunks in forward (front to back) order. The format of the
commands is also changed slightly: command characters precede the lines they
modify, spaces separate line numbers in ranges, and no attempt is made to
disambiguate hunk lines consisting of a single period. Like
.Xr ed
format, forward
.Xr ed
format cannot represent incomplete lines.
.Pp
Forward
.Xr ed
format is not very useful, because neither
.Xr ed
nor
.Xr patch
can apply diffs in this format. It exists mainly for compatibility with older
versions of
.Xr diff .
Use the
.Op -f
or
.Op --forward-ed
option to select it.
.Pp
.Em  RCS Scripts
.Pp
The RCS output format is designed specifically for use by the Revision Control
System, which is a set of free programs used for organizing different versions
and systems of files. Use the
.Op -n
or
.Op --rcs
option to select this output format. It is like the forward
.Xr ed
format (see Section
.Dq Forward ed ) ,
but it can represent arbitrary changes to the contents of a file because it
avoids the forward
.Xr ed
format's problems with lines consisting of a single period and with incomplete
lines. Instead of ending text sections with a line consisting of a single
period, each command specifies the number of lines it affects; a combination
of the
.Li a
and
.Li d
commands are used instead of
.Li c .
Also, if the second file ends in a changed incomplete line, then the output
also ends in an incomplete line.
.Pp
Here is the output of
.Li diff -n lao tzu
(see Section
.Dq Sample diff Input ,
for the complete contents of the two files):
.Pp
.Bd -literal -offset indent
d1 2
d4 1
a4 2
The named is the mother of all things.

a11 3
They both may be called deep and profound.
Deeper and more profound,
The door of all subtleties!
.Ed
.Pp
.Ss  Merging Files with If-then-else
You can use
.Xr diff
to merge two files of C source code. The output of
.Xr diff
in this format contains all the lines of both files. Lines common to both
files are output just once; the differing parts are separated by the C preprocessor
directives
.Li #ifdef Va name
or
.Li #ifndef Va name ,
.Li #else ,
and
.Li #endif .
When compiling the output, you select which version to use by either defining
or leaving undefined the macro
.Va name .
.Pp
To merge two files, use
.Xr diff
with the
.Op -D Va name
or
.Op --ifdef= Va name
option. The argument
.Va name
is the C preprocessor identifier to use in the
.Li #ifdef
and
.Li #ifndef
directives.
.Pp
For example, if you change an instance of
.Li wait (&s)
to
.Li waitpid (-1, &s, 0)
and then merge the old and new files with the
.Op --ifdef=HAVE_WAITPID
option, then the affected part of your code might look like this:
.Pp
.Bd -literal -offset indent
    do {
#ifndef HAVE_WAITPID
        if ((w = wait (&s)) < 0  &&  errno != EINTR)
#else /* HAVE_WAITPID */
        if ((w = waitpid (-1, &s, 0)) < 0  &&  errno != EINTR)
#endif /* HAVE_WAITPID */
            return w;
    } while (w != child);
.Ed
.Pp
You can specify formats for languages other than C by using line group formats
and line formats, as described in the next sections.
.Pp
.Em  Line Group Formats
.Pp
Line group formats let you specify formats suitable for many applications
that allow if-then-else input, including programming languages and text formatting
languages. A line group format specifies the output format for a contiguous
group of similar lines.
.Pp
For example, the following command compares the TeX files
.Pa old
and
.Pa new ,
and outputs a merged file in which old regions are surrounded by
.Li \ebegin{em}
-
.Li \eend{em}
lines, and new regions are surrounded by
.Li \ebegin{bf}
-
.Li \eend{bf}
lines.
.Pp
.Bd -literal -offset indent
diff \e
   --old-group-format='\ebegin{em}
%<\eend{em}
\&' \e
   --new-group-format='\ebegin{bf}
%>\eend{bf}
\&' \e
   old new
.Ed
.Pp
The following command is equivalent to the above example, but it is a little
more verbose, because it spells out the default line group formats.
.Pp
.Bd -literal -offset indent
diff \e
   --old-group-format='\ebegin{em}
%<\eend{em}
\&' \e
   --new-group-format='\ebegin{bf}
%>\eend{bf}
\&' \e
   --unchanged-group-format='%=' \e
   --changed-group-format='\ebegin{em}
%<\eend{em}
\ebegin{bf}
%>\eend{bf}
\&' \e
   old new
.Ed
.Pp
Here is a more advanced example, which outputs a diff listing with headers
containing line numbers in a \(lqplain English\(rq style.
.Pp
.Bd -literal -offset indent
diff \e
   --unchanged-group-format=\(rq \e
   --old-group-format='-------- %dn line%(n=1?:s) deleted at %df:
%<' \e
   --new-group-format='-------- %dN line%(N=1?:s) added after %de:
%>' \e
   --changed-group-format='-------- %dn line%(n=1?:s) changed at %df:
%<-------- to:
%>' \e
   old new
.Ed
.Pp
To specify a line group format, use
.Xr diff
with one of the options listed below. You can specify up to four line group
formats, one for each kind of line group. You should quote
.Va format ,
because it typically contains shell metacharacters.
.Pp
.Bl -tag -width Ds
.It  --old-group-format= Va format
These line groups are hunks containing only lines from the first file. The
default old group format is the same as the changed group format if it is
specified; otherwise it is a format that outputs the line group as-is.
.Pp
.It  --new-group-format= Va format
These line groups are hunks containing only lines from the second file. The
default new group format is same as the changed group format if it is specified;
otherwise it is a format that outputs the line group as-is.
.Pp
.It  --changed-group-format= Va format
These line groups are hunks containing lines from both files. The default
changed group format is the concatenation of the old and new group formats.
.Pp
.It  --unchanged-group-format= Va format
These line groups contain lines common to both files. The default unchanged
group format is a format that outputs the line group as-is.
.El
.Pp
In a line group format, ordinary characters represent themselves; conversion
specifications start with
.Li %
and have one of the following forms.
.Pp
.Bl -tag -width Ds
.It  %<
stands for the lines from the first file, including the trailing newline.
Each line is formatted according to the old line format (see Section
.Dq Line Formats ) .
.Pp
.It  %>
stands for the lines from the second file, including the trailing newline.
Each line is formatted according to the new line format.
.Pp
.It  %=
stands for the lines common to both files, including the trailing newline.
Each line is formatted according to the unchanged line format.
.Pp
.It  %%
stands for
.Li % .
.Pp
.It  %c' Va C'
where
.Va C
is a single character, stands for
.Va C .
.Va C
may not be a backslash or an apostrophe. For example,
.Li %c':'
stands for a colon, even inside the then-part of an if-then-else format, which
a colon would normally terminate.
.Pp
.It  %c'\e Va O'
where
.Va O
is a string of 1, 2, or 3 octal digits, stands for the character with octal
code
.Va O .
For example,
.Li %c'\e0'
stands for a null character.
.Pp
.It  Va F Va n
where
.Va F
is a
.Li printf
conversion specification and
.Va n
is one of the following letters, stands for
.Va n
\&'s value formatted with
.Va F .
.Pp
.Bl -tag -width Ds
.It  e
The line number of the line just before the group in the old file.
.Pp
.It  f
The line number of the first line in the group in the old file; equals
.Va e
+ 1.
.Pp
.It  l
The line number of the last line in the group in the old file.
.Pp
.It  m
The line number of the line just after the group in the old file; equals
.Va l
+ 1.
.Pp
.It  n
The number of lines in the group in the old file; equals
.Va l
-
.Va f
+ 1.
.Pp
.It  E, F, L, M, N
Likewise, for lines in the new file.
.Pp
.El
The
.Li printf
conversion specification can be
.Li %d ,
.Li %o ,
.Li %x ,
or
.Li %X ,
specifying decimal, octal, lower case hexadecimal, or upper case hexadecimal
output respectively. After the
.Li %
the following options can appear in sequence: a series of zero or more flags;
an integer specifying the minimum field width; and a period followed by an
optional integer specifying the minimum number of digits. The flags are
.Li -
for left-justification,
.Li '
for separating the digit into groups as specified by the
.Ev LC_NUMERIC
locale category, and
.Li 0
for padding with zeros instead of spaces. For example,
.Li %5dN
prints the number of new lines in the group in a field of width 5 characters,
using the
.Li printf
format
.Li "%5d" .
.Pp
.It  ( Va A= Va B? Va T: Va E)
If
.Va A
equals
.Va B
then
.Va T
else
.Va E .
.Va A
and
.Va B
are each either a decimal constant or a single letter interpreted as above.
This format spec is equivalent to
.Va T
if
.Va A
\&'s value equals
.Va B
\&'s; otherwise it is equivalent to
.Va E .
.Pp
For example,
.Li %(N=0?no:%dN) line%(N=1?:s)
is equivalent to
.Li no lines
if
.Va N
(the number of lines in the group in the new file) is 0, to
.Li 1 line
if
.Va N
is 1, and to
.Li %dN lines
otherwise.
.El
.Pp
.Em  Line Formats
.Pp
Line formats control how each line taken from an input file is output as part
of a line group in if-then-else format.
.Pp
For example, the following command outputs text with a one-character change
indicator to the left of the text. The first character of output is
.Li -
for deleted lines,
.Li |
for added lines, and a space for unchanged lines. The formats contain newline
characters where newlines are desired on output.
.Pp
.Bd -literal -offset indent
diff \e
   --old-line-format='-%l
\&' \e
   --new-line-format='|%l
\&' \e
   --unchanged-line-format=' %l
\&' \e
   old new
.Ed
.Pp
To specify a line format, use one of the following options. You should quote
.Va format ,
since it often contains shell metacharacters.
.Pp
.Bl -tag -width Ds
.It  --old-line-format= Va format
formats lines just from the first file.
.Pp
.It  --new-line-format= Va format
formats lines just from the second file.
.Pp
.It  --unchanged-line-format= Va format
formats lines common to both files.
.Pp
.It  --line-format= Va format
formats all lines; in effect, it sets all three above options simultaneously.
.El
.Pp
In a line format, ordinary characters represent themselves; conversion specifications
start with
.Li %
and have one of the following forms.
.Pp
.Bl -tag -width Ds
.It  %l
stands for the contents of the line, not counting its trailing newline (if
any). This format ignores whether the line is incomplete;See Section
.Dq Incomplete Lines .
.Pp
.It  %L
stands for the contents of the line, including its trailing newline (if any).
If a line is incomplete, this format preserves its incompleteness.
.Pp
.It  %%
stands for
.Li % .
.Pp
.It  %c' Va C'
where
.Va C
is a single character, stands for
.Va C .
.Va C
may not be a backslash or an apostrophe. For example,
.Li %c':'
stands for a colon.
.Pp
.It  %c'\e Va O'
where
.Va O
is a string of 1, 2, or 3 octal digits, stands for the character with octal
code
.Va O .
For example,
.Li %c'\e0'
stands for a null character.
.Pp
.It  Va Fn
where
.Va F
is a
.Li printf
conversion specification, stands for the line number formatted with
.Va F .
For example,
.Li %.5dn
prints the line number using the
.Li printf
format
.Li "%.5d" .
See Section.Dq Line Group Formats ,
for more about printf conversion specifications.
.Pp
.El
The default line format is
.Li %l
followed by a newline character.
.Pp
If the input contains tab characters and it is important that they line up
on output, you should ensure that
.Li %l
or
.Li %L
in a line format is just after a tab stop (e.g. by preceding
.Li %l
or
.Li %L
with a tab character), or you should use the
.Op -t
or
.Op --expand-tabs
option.
.Pp
Taken together, the line and line group formats let you specify many different
formats. For example, the following command uses a format similar to normal
.Xr diff
format. You can tailor this command to get fine control over
.Xr diff
output.
.Pp
.Bd -literal -offset indent
diff \e
   --old-line-format='< %l
\&' \e
   --new-line-format='> %l
\&' \e
   --old-group-format='%df%(f=l?:,%dl)d%dE
%<' \e
   --new-group-format='%dea%dF%(F=L?:,%dL)
%>' \e
   --changed-group-format='%df%(f=l?:,%dl)c%dF%(F=L?:,%dL)
%<---
%>' \e
   --unchanged-group-format=\(rq \e
   old new
.Ed
.Pp
.Em  An Example of If-then-else Format
.Pp
Here is the output of
.Li diff -DTWO lao tzu
(see Section
.Dq Sample diff Input ,
for the complete contents of the two files):
.Pp
.Bd -literal -offset indent
#ifndef TWO
The Way that can be told of is not the eternal Way;
The name that can be named is not the eternal name.
#endif /* ! TWO */
The Nameless is the origin of Heaven and Earth;
#ifndef TWO
The Named is the mother of all things.
#else /* TWO */
The named is the mother of all things.

#endif /* TWO */
Therefore let there always be non-being,
  so we may see their subtlety,
And let there always be being,
  so we may see their outcome.
The two are the same,
But after they are produced,
  they have different names.
#ifdef TWO
They both may be called deep and profound.
Deeper and more profound,
The door of all subtleties!
#endif /* TWO */
.Ed
.Pp
.Em  Detailed Description of If-then-else Format
.Pp
For lines common to both files,
.Xr diff
uses the unchanged line group format. For each hunk of differences in the
merged output format, if the hunk contains only lines from the first file,
.Xr diff
uses the old line group format; if the hunk contains only lines from the second
file,
.Xr diff
uses the new group format; otherwise,
.Xr diff
uses the changed group format.
.Pp
The old, new, and unchanged line formats specify the output format of lines
from the first file, lines from the second file, and lines common to both
files, respectively.
.Pp
The option
.Op --ifdef= Va name
is equivalent to the following sequence of options using shell syntax:
.Pp
.Bd -literal -offset indent
--old-group-format='#ifndef name
%<#endif /* ! name */
\&' \e
--new-group-format='#ifdef name
%>#endif /* name */
\&' \e
--unchanged-group-format='%=' \e
--changed-group-format='#ifndef name
%<#else /* name */
%>#endif /* name */
\&'
.Ed
.Pp
You should carefully check the
.Xr diff
output for proper nesting. For example, when using the
.Op -D Va name
or
.Op --ifdef= Va name
option, you should check that if the differing lines contain any of the C
preprocessor directives
.Li #ifdef ,
.Li #ifndef ,
.Li #else ,
.Li #elif ,
or
.Li #endif ,
they are nested properly and match. If they don't, you must make corrections
manually. It is a good idea to carefully check the resulting code anyway to
make sure that it really does what you want it to; depending on how the input
files were produced, the output might contain duplicate or otherwise incorrect
code.
.Pp
The
.Xr patch
.Op -D Va name
option behaves like the
.Xr diff
.Op -D Va name
option, except it operates on a file and a diff to produce a merged file;See Section
.Dq patch Options .
.Pp
.Sh  Incomplete Lines
When an input file ends in a non-newline character, its last line is called
an
.Em incomplete line
because its last character is not a newline. All other lines are called
.Em full lines
and end in a newline character. Incomplete lines do not match full lines unless
differences in white space are ignored (see Section
.Dq White Space ) .
.Pp
An incomplete line is normally distinguished on output from a full line by
a following line that starts with
.Li \e .
However, the RCS format (see Section
.Dq RCS )
outputs the incomplete line as-is, without any trailing newline or following
line. The side by side format normally represents incomplete lines as-is,
but in some cases uses a
.Li \e
or
.Li /
gutter marker;See Section
.Dq Side by Side .
The if-then-else line format preserves a line's incompleteness with
.Li %L ,
and discards the newline with
.Li %l
;See Section
.Dq Line Formats .
Finally, with the
.Xr ed
and forward
.Xr ed
output formats (see Section
.Dq Output Formats )
.Xr diff
cannot represent an incomplete line, so it pretends there was a newline and
reports an error.
.Pp
For example, suppose
.Pa F
and
.Pa G
are one-byte files that contain just
.Li f
and
.Li g ,
respectively. Then
.Li diff F G
outputs
.Pp
.Bd -literal -offset indent
1c1
< f
\e No newline at end of file
---
> g
\e No newline at end of file
.Ed
.Pp
(The exact message may differ in non-English locales.)
.Li diff -n F G
outputs the following without a trailing newline:
.Pp
.Bd -literal -offset indent
d1 1
a1 1
g
.Ed
.Pp
.Li diff -e F G
reports two errors and outputs the following:
.Pp
.Bd -literal -offset indent
1c
g
\&.
.Ed
.Pp
.Sh  Comparing Directories
You can use
.Xr diff
to compare some or all of the files in two directory trees. When both file
name arguments to
.Xr diff
are directories, it compares each file that is contained in both directories,
examining file names in alphabetical order as specified by the
.Ev LC_COLLATE
locale category. Normally
.Xr diff
is silent about pairs of files that contain no differences, but if you use
the
.Op -s
or
.Op --report-identical-files
option, it reports pairs of identical files. Normally
.Xr diff
reports subdirectories common to both directories without comparing subdirectories'
files, but if you use the
.Op -r
or
.Op --recursive
option, it compares every corresponding pair of files in the directory trees,
as many levels deep as they go.
.Pp
For file names that are in only one of the directories,
.Xr diff
normally does not show the contents of the file that exists; it reports only
that the file exists in that directory and not in the other. You can make
.Xr diff
act as though the file existed but was empty in the other directory, so that
it outputs the entire contents of the file that actually exists. (It is output
as either an insertion or a deletion, depending on whether it is in the first
or the second directory given.) To do this, use the
.Op -N
or
.Op --new-file
option.
.Pp
If the older directory contains one or more large files that are not in the
newer directory, you can make the patch smaller by using the
.Op --unidirectional-new-file
option instead of
.Op -N .
This option is like
.Op -N
except that it only inserts the contents of files that appear in the second
directory but not the first (that is, files that were added). At the top of
the patch, write instructions for the user applying the patch to remove the
files that were deleted before applying the patch.See Section
.Dq Making Patches ,
for more discussion of making patches for distribution.
.Pp
To ignore some files while comparing directories, use the
.Op -x Va pattern
or
.Op --exclude= Va pattern
option. This option ignores any files or subdirectories whose base names match
the shell pattern
.Va pattern .
Unlike in the shell, a period at the start of the base of a file name matches
a wildcard at the start of a pattern. You should enclose
.Va pattern
in quotes so that the shell does not expand it. For example, the option
.Op -x '*.[ao]'
ignores any file whose name ends with
.Li .a
or
.Li .o .
.Pp
This option accumulates if you specify it more than once. For example, using
the options
.Op -x 'RCS' -x '*,v'
ignores any file or subdirectory whose base name is
.Li RCS
or ends with
.Li ,v .
.Pp
If you need to give this option many times, you can instead put the patterns
in a file, one pattern per line, and use the
.Op -X Va file
or
.Op --exclude-from= Va file
option. Trailing white space and empty lines are ignored in the pattern file.
.Pp
If you have been comparing two directories and stopped partway through, later
you might want to continue where you left off. You can do this by using the
.Op -S Va file
or
.Op --starting-file= Va file
option. This compares only the file
.Va file
and all alphabetically later files in the topmost directory level.
.Pp
If two directories differ only in that file names are lower case in one directory
and upper case in the upper,
.Xr diff
normally reports many differences because it compares file names in a case
sensitive way. With the
.Op --ignore-file-name-case
option,
.Xr diff
ignores case differences in file names, so that for example the contents of
the file
.Pa Tao
in one directory are compared to the contents of the file
.Pa TAO
in the other. The
.Op --no-ignore-file-name-case
option cancels the effect of the
.Op --ignore-file-name-case
option, reverting to the default behavior.
.Pp
If an
.Op -x Va pattern
or
.Op --exclude= Va pattern
option, or an
.Op -X Va file
or
.Op --exclude-from= Va file
option, is specified while the
.Op --ignore-file-name-case
option is in effect, case is ignored when excluding file names matching the
specified patterns.
.Pp
.Sh  Making Xr diff Output Prettier
.Xr diff
provides several ways to adjust the appearance of its output. These adjustments
can be applied to any output format.
.Pp
.Ss  Preserving Tab Stop Alignment
The lines of text in some of the
.Xr diff
output formats are preceded by one or two characters that indicate whether
the text is inserted, deleted, or changed. The addition of those characters
can cause tabs to move to the next tab stop, throwing off the alignment of
columns in the line. GNU
.Xr diff
provides two ways to make tab-aligned columns line up correctly.
.Pp
The first way is to have
.Xr diff
convert all tabs into the correct number of spaces before outputting them;
select this method with the
.Op -t
or
.Op --expand-tabs
option. To use this form of output with
.Xr patch ,
you must give
.Xr patch
the
.Op -l
or
.Op --ignore-white-space
option (see Section
.Dq Changed White Space ,
for more information).
.Xr diff
normally assumes that tab stops are set every 8 print columns, but this can
be altered by the
.Op --tabsize= Va columns
option.
.Pp
The other method for making tabs line up correctly is to add a tab character
instead of a space after the indicator character at the beginning of the line.
This ensures that all following tab characters are in the same position relative
to tab stops that they were in the original files, so that the output is aligned
correctly. Its disadvantage is that it can make long lines too long to fit
on one line of the screen or the paper. It also does not work with the unified
output format, which does not have a space character after the change type
indicator character. Select this method with the
.Op -T
or
.Op --initial-tab
option.
.Pp
.Ss  Paginating Xr diff Output
It can be convenient to have long output page-numbered and time-stamped. The
.Op -l
or
.Op --paginate
option does this by sending the
.Xr diff
output through the
.Xr pr
program. Here is what the page header might look like for
.Li diff -lc lao tzu :
.Pp
.Bd -literal -offset indent
2002-02-22 14:20                 diff -lc lao tzu                 Page 1
.Ed
.Pp
.Sh  Xr diff Performance Tradeoffs
GNU
.Xr diff
runs quite efficiently; however, in some circumstances you can cause it to
run faster or produce a more compact set of changes.
.Pp
One way to improve
.Xr diff
performance is to use hard or symbolic links to files instead of copies. This
improves performance because
.Xr diff
normally does not need to read two hard or symbolic links to the same file,
since their contents must be identical. For example, suppose you copy a large
directory hierarchy, make a few changes to the copy, and then often use
.Li diff -r
to compare the original to the copy. If the original files are read-only,
you can greatly improve performance by creating the copy using hard or symbolic
links (e.g., with GNU
.Li cp -lR
or
.Li cp -sR ) .
Before editing a file in the copy for the first time, you should break the
link and replace it with a regular copy.
.Pp
You can also affect the performance of GNU
.Xr diff
by giving it options that change the way it compares files. Performance has
more than one dimension. These options improve one aspect of performance at
the cost of another, or they improve performance in some cases while hurting
it in others.
.Pp
The way that GNU
.Xr diff
determines which lines have changed always comes up with a near-minimal set
of differences. Usually it is good enough for practical purposes. If the
.Xr diff
output is large, you might want
.Xr diff
to use a modified algorithm that sometimes produces a smaller set of differences.
The
.Op -d
or
.Op --minimal
option does this; however, it can also cause
.Xr diff
to run more slowly than usual, so it is not the default behavior.
.Pp
When the files you are comparing are large and have small groups of changes
scattered throughout them, you can use the
.Op --speed-large-files
option to make a different modification to the algorithm that
.Xr diff
uses. If the input files have a constant small density of changes, this option
speeds up the comparisons without changing the output. If not,
.Xr diff
might produce a larger set of differences; however, the output will still
be correct.
.Pp
Normally
.Xr diff
discards the prefix and suffix that is common to both files before it attempts
to find a minimal set of differences. This makes
.Xr diff
run faster, but occasionally it may produce non-minimal output. The
.Op --horizon-lines= Va lines
option prevents
.Xr diff
from discarding the last
.Va lines
lines of the prefix and the first
.Va lines
lines of the suffix. This gives
.Xr diff
further opportunities to find a minimal output.
.Pp
Suppose a run of changed lines includes a sequence of lines at one end and
there is an identical sequence of lines just outside the other end. The
.Xr diff
command is free to choose which identical sequence is included in the hunk.
In this case,
.Xr diff
normally shifts the hunk's boundaries when this merges adjacent hunks, or
shifts a hunk's lines towards the end of the file. Merging hunks can make
the output look nicer in some cases.
.Pp
.Sh  Comparing Three Files
Use the program
.Xr diff3
to compare three files and show any differences among them. (
.Xr diff3
can also merge files; see diff3 Merging).
.Pp
The \(lqnormal\(rq
.Xr diff3
output format shows each hunk of differences without surrounding context.
Hunks are labeled depending on whether they are two-way or three-way, and
lines are annotated by their location in the input files.
.Pp
See Section.Dq Invoking diff3 ,
for more information on how to run
.Xr diff3 .
.Pp
.Ss  A Third Sample Input File
Here is a third sample file that will be used in examples to illustrate the
output of
.Xr diff3
and how various options can change it. The first two files are the same that
we used for
.Xr diff
(see Section
.Dq Sample diff Input ) .
This is the third sample file, called
.Pa tao :
.Pp
.Bd -literal -offset indent
The Way that can be told of is not the eternal Way;
The name that can be named is not the eternal name.
The Nameless is the origin of Heaven and Earth;
The named is the mother of all things.

Therefore let there always be non-being,
  so we may see their subtlety,
And let there always be being,
  so we may see their result.
The two are the same,
But after they are produced,
  they have different names.

  -- The Way of Lao-Tzu, tr. Wing-tsit Chan
.Ed
.Pp
.Ss  An Example of Xr diff3 Normal Format
Here is the output of the command
.Li diff3 lao tzu tao
(see Section
.Dq Sample diff3 Input ,
for the complete contents of the files). Notice that it shows only the lines
that are different among the three files.
.Pp
.Bd -literal -offset indent
====2
1:1,2c
3:1,2c
  The Way that can be told of is not the eternal Way;
  The name that can be named is not the eternal name.
2:0a
====1
1:4c
  The Named is the mother of all things.
2:2,3c
3:4,5c
  The named is the mother of all things.
  
====3
1:8c
2:7c
    so we may see their outcome.
3:9c
    so we may see their result.
====
1:11a
2:11,13c
  They both may be called deep and profound.
  Deeper and more profound,
  The door of all subtleties!
3:13,14c
  
    -- The Way of Lao-Tzu, tr. Wing-tsit Chan
.Ed
.Pp
.Ss  Detailed Description of Xr diff3 Normal Format
Each hunk begins with a line marked
.Li ==== .
Three-way hunks have plain
.Li ====
lines, and two-way hunks have
.Li 1 ,
.Li 2 ,
or
.Li 3
appended to specify which of the three input files differ in that hunk. The
hunks contain copies of two or three sets of input lines each preceded by
one or two commands identifying where the lines came from.
.Pp
Normally, two spaces precede each copy of an input line to distinguish it
from the commands. But with the
.Op -T
or
.Op --initial-tab
option,
.Xr diff3
uses a tab instead of two spaces; this lines up tabs correctly.See Section
.Dq Tabs ,
for more information.
.Pp
Commands take the following forms:
.Pp
.Bl -tag -width Ds
.It  Va file: Va la
This hunk appears after line
.Va l
of file
.Va file ,
and contains no lines in that file. To edit this file to yield the other files,
one must append hunk lines taken from the other files. For example,
.Li 1:11a
means that the hunk follows line 11 in the first file and contains no lines
from that file.
.Pp
.It  Va file: Va rc
This hunk contains the lines in the range
.Va r
of file
.Va file .
The range
.Va r
is a comma-separated pair of line numbers, or just one number if the range
is a singleton. To edit this file to yield the other files, one must change
the specified lines to be the lines taken from the other files. For example,
.Li 2:11,13c
means that the hunk contains lines 11 through 13 from the second file.
.El
.Pp
If the last line in a set of input lines is incomplete (see Section
.Dq Incomplete Lines ) ,
it is distinguished on output from a full line by a following line that starts
with
.Li \e .
.Pp
.Ss  Xr diff3 Hunks
Groups of lines that differ in two or three of the input files are called
.Em diff3 hunks ,
by analogy with
.Xr diff
hunks (see Section
.Dq Hunks ) .
If all three input files differ in a
.Xr diff3
hunk, the hunk is called a
.Em three-way hunk
; if just two input files differ, it is a
.Em two-way hunk .
.Pp
As with
.Xr diff ,
several solutions are possible. When comparing the files
.Li A ,
.Li B ,
and
.Li C ,
.Xr diff3
normally finds
.Xr diff3
hunks by merging the two-way hunks output by the two commands
.Li diff A B
and
.Li diff A C .
This does not necessarily minimize the size of the output, but exceptions
should be rare.
.Pp
For example, suppose
.Pa F
contains the three lines
.Li a ,
.Li b ,
.Li f ,
.Pa G
contains the lines
.Li g ,
.Li b ,
.Li g ,
and
.Pa H
contains the lines
.Li a ,
.Li b ,
.Li h .
.Li diff3 F G H
might output the following:
.Pp
.Bd -literal -offset indent
====2
1:1c
3:1c
  a
2:1c
  g
====
1:3c
  f
2:3c
  g
3:3c
  h
.Ed
.Pp
because it found a two-way hunk containing
.Li a
in the first and third files and
.Li g
in the second file, then the single line
.Li b
common to all three files, then a three-way hunk containing the last line
of each file.
.Pp
.Sh  Merging From a Common Ancestor
When two people have made changes to copies of the same file,
.Xr diff3
can produce a merged output that contains both sets of changes together with
warnings about conflicts.
.Pp
One might imagine programs with names like
.Xr diff4
and
.Xr diff5
to compare more than three files simultaneously, but in practice the need
rarely arises. You can use
.Xr diff3
to merge three or more sets of changes to a file by merging two change sets
at a time.
.Pp
.Xr diff3
can incorporate changes from two modified versions into a common preceding
version. This lets you merge the sets of changes represented by the two newer
files. Specify the common ancestor version as the second argument and the
two newer versions as the first and third arguments, like this:
.Pp
.Bd -literal -offset indent
diff3 mine older yours
.Ed
.Pp
You can remember the order of the arguments by noting that they are in alphabetical
order.
.Pp
You can think of this as subtracting
.Va older
from
.Va yours
and adding the result to
.Va mine ,
or as merging into
.Va mine
the changes that would turn
.Va older
into
.Va yours .
This merging is well-defined as long as
.Va mine
and
.Va older
match in the neighborhood of each such change. This fails to be true when
all three input files differ or when only
.Va older
differs; we call this a
.Em conflict .
When all three input files differ, we call the conflict an
.Em overlap .
.Pp
.Xr diff3
gives you several ways to handle overlaps and conflicts. You can omit overlaps
or conflicts, or select only overlaps, or mark conflicts with special
.Li <<<<<<<
and
.Li >>>>>>>
lines.
.Pp
.Xr diff3
can output the merge results as an
.Xr ed
script that that can be applied to the first file to yield the merged output.
However, it is usually better to have
.Xr diff3
generate the merged output directly; this bypasses some problems with
.Xr ed .
.Pp
.Ss  Selecting Which Changes to Incorporate
You can select all unmerged changes from
.Va older
to
.Va yours
for merging into
.Va mine
with the
.Op -e
or
.Op --ed
option. You can select only the nonoverlapping unmerged changes with
.Op -3
or
.Op --easy-only ,
and you can select only the overlapping changes with
.Op -x
or
.Op --overlap-only .
.Pp
The
.Op -e ,
.Op -3
and
.Op -x
options select only
.Em unmerged changes ,
i.e. changes where
.Va mine
and
.Va yours
differ; they ignore changes from
.Va older
to
.Va yours
where
.Va mine
and
.Va yours
are identical, because they assume that such changes have already been merged.
If this assumption is not a safe one, you can use the
.Op -A
or
.Op --show-all
option (see Section
.Dq Marking Conflicts ) .
.Pp
Here is the output of the command
.Xr diff3
with each of these three options (see Section
.Dq Sample diff3 Input ,
for the complete contents of the files). Notice that
.Op -e
outputs the union of the disjoint sets of changes output by
.Op -3
and
.Op -x .
.Pp
Output of
.Li diff3 -e lao tzu tao :
.Bd -literal -offset indent
11a

  -- The Way of Lao-Tzu, tr. Wing-tsit Chan
\&.
8c
  so we may see their result.
\&.
.Ed
.Pp
Output of
.Li diff3 -3 lao tzu tao :
.Bd -literal -offset indent
8c
  so we may see their result.
\&.
.Ed
.Pp
Output of
.Li diff3 -x lao tzu tao :
.Bd -literal -offset indent
11a

  -- The Way of Lao-Tzu, tr. Wing-tsit Chan
\&.
.Ed
.Pp
.Ss  Marking Conflicts
.Xr diff3
can mark conflicts in the merged output by bracketing them with special marker
lines. A conflict that comes from two files
.Va A
and
.Va B
is marked as follows:
.Pp
.Bd -literal -offset indent
<<<<<<< A
lines from A
=======
lines from B
>>>>>>> B
.Ed
.Pp
A conflict that comes from three files
.Va A ,
.Va B
and
.Va C
is marked as follows:
.Pp
.Bd -literal -offset indent
<<<<<<< A
lines from A
||||||| B
lines from B
=======
lines from C
>>>>>>> C
.Ed
.Pp
The
.Op -A
or
.Op --show-all
option acts like the
.Op -e
option, except that it brackets conflicts, and it outputs all changes from
.Va older
to
.Va yours ,
not just the unmerged changes. Thus, given the sample input files (see Section
.Dq Sample diff3 Input ) ,
.Li diff3 -A lao tzu tao
puts brackets around the conflict where only
.Pa tzu
differs:
.Pp
.Bd -literal -offset indent
<<<<<<< tzu
=======
The Way that can be told of is not the eternal Way;
The name that can be named is not the eternal name.
>>>>>>> tao
.Ed
.Pp
And it outputs the three-way conflict as follows:
.Pp
.Bd -literal -offset indent
<<<<<<< lao
||||||| tzu
They both may be called deep and profound.
Deeper and more profound,
The door of all subtleties!
=======

  -- The Way of Lao-Tzu, tr. Wing-tsit Chan
>>>>>>> tao
.Ed
.Pp
The
.Op -E
or
.Op --show-overlap
option outputs less information than the
.Op -A
or
.Op --show-all
option, because it outputs only unmerged changes, and it never outputs the
contents of the second file. Thus the
.Op -E
option acts like the
.Op -e
option, except that it brackets the first and third files from three-way overlapping
changes. Similarly,
.Op -X
acts like
.Op -x ,
except it brackets all its (necessarily overlapping) changes. For example,
for the three-way overlapping change above, the
.Op -E
and
.Op -X
options output the following:
.Pp
.Bd -literal -offset indent
<<<<<<< lao
=======

  -- The Way of Lao-Tzu, tr. Wing-tsit Chan
>>>>>>> tao
.Ed
.Pp
If you are comparing files that have meaningless or uninformative names, you
can use the
.Op --label= Va label
option to show alternate names in the
.Li <<<<<<< ,
.Li |||||||
and
.Li >>>>>>>
brackets. This option can be given up to three times, once for each input
file. Thus
.Li diff3 -A --label X --label Y --label Z A B C
acts like
.Li diff3 -A A B C ,
except that the output looks like it came from files named
.Li X ,
.Li Y
and
.Li Z
rather than from files named
.Li A ,
.Li B
and
.Li C .
.Pp
.Ss  Generating the Merged Output Directly
With the
.Op -m
or
.Op --merge
option,
.Xr diff3
outputs the merged file directly. This is more efficient than using
.Xr ed
to generate it, and works even with non-text files that
.Xr ed
would reject. If you specify
.Op -m
without an
.Xr ed
script option,
.Op -A
is assumed.
.Pp
For example, the command
.Li diff3 -m lao tzu tao
(see Section
.Dq Sample diff3 Input
for a copy of the input files) would output the following:
.Pp
.Bd -literal -offset indent
<<<<<<< tzu
=======
The Way that can be told of is not the eternal Way;
The name that can be named is not the eternal name.
>>>>>>> tao
The Nameless is the origin of Heaven and Earth;
The Named is the mother of all things.
Therefore let there always be non-being,
  so we may see their subtlety,
And let there always be being,
  so we may see their result.
The two are the same,
But after they are produced,
  they have different names.
<<<<<<< lao
||||||| tzu
They both may be called deep and profound.
Deeper and more profound,
The door of all subtleties!
=======

  -- The Way of Lao-Tzu, tr. Wing-tsit Chan
>>>>>>> tao
.Ed
.Pp
.Ss  How Xr diff3 Merges Incomplete Lines
With
.Op -m ,
incomplete lines (see Section
.Dq Incomplete Lines )
are simply copied to the output as they are found; if the merged output ends
in an conflict and one of the input files ends in an incomplete line, succeeding
.Li ||||||| ,
.Li =======
or
.Li >>>>>>>
brackets appear somewhere other than the start of a line because they are
appended to the incomplete line.
.Pp
Without
.Op -m ,
if an
.Xr ed
script option is specified and an incomplete line is found,
.Xr diff3
generates a warning and acts as if a newline had been present.
.Pp
.Ss  Saving the Changed File
Traditional Unix
.Xr diff3
generates an
.Xr ed
script without the trailing
.Li w
and
.Li q
commands that save the changes. System V
.Xr diff3
generates these extra commands. GNU
.Xr diff3
normally behaves like traditional Unix
.Xr diff3 ,
but with the
.Op -i
option it behaves like System V
.Xr diff3
and appends the
.Li w
and
.Li q
commands.
.Pp
The
.Op -i
option requires one of the
.Xr ed
script options
.Op -AeExX3 ,
and is incompatible with the merged output option
.Op -m .
.Pp
.Sh  Interactive Merging with Xr sdiff
With
.Xr sdiff ,
you can merge two files interactively based on a side-by-side
.Op -y
format comparison (see Section
.Dq Side by Side ) .
Use
.Op -o Va file
or
.Op --output= Va file
to specify where to put the merged text.See Section
.Dq Invoking sdiff ,
for more details on the options to
.Xr sdiff .
.Pp
Another way to merge files interactively is to use the Emacs Lisp package
.Xr emerge .
See Section.Dq emerge ,
for more information.
.Pp
.Ss  Specifying Xr diff Options to Xr sdiff
The following
.Xr sdiff
options have the same meaning as for
.Xr diff .
See Section.Dq diff Options ,
for the use of these options.
.Pp
.Bd -literal -offset indent
-a -b -d -i -t -v
-B -E -I regexp

--expand-tabs
--ignore-blank-lines  --ignore-case
--ignore-matching-lines=regexp  --ignore-space-change
--ignore-tab-expansion
--left-column  --minimal  --speed-large-files
--strip-trailing-cr  --suppress-common-lines
--tabsize=columns  --text  --version  --width=columns
.Ed
.Pp
For historical reasons,
.Xr sdiff
has alternate names for some options. The
.Op -l
option is equivalent to the
.Op --left-column
option, and similarly
.Op -s
is equivalent to
.Op --suppress-common-lines .
The meaning of the
.Xr sdiff
.Op -w
and
.Op -W
options is interchanged from that of
.Xr diff :
with
.Xr sdiff ,
.Op -w Va columns
is equivalent to
.Op --width= Va columns ,
and
.Op -W
is equivalent to
.Op --ignore-all-space .
.Xr sdiff
without the
.Op -o
option is equivalent to
.Xr diff
with the
.Op -y
or
.Op --side-by-side
option (see Section
.Dq Side by Side ) .
.Pp
.Ss  Merge Commands
Groups of common lines, with a blank gutter, are copied from the first file
to the output. After each group of differing lines,
.Xr sdiff
prompts with
.Li %
and pauses, waiting for one of the following commands. Follow each command
with RET.
.Pp
.Bl -tag -width Ds
.It  e
Discard both versions. Invoke a text editor on an empty temporary file, then
copy the resulting file to the output.
.Pp
.It  eb
Concatenate the two versions, edit the result in a temporary file, then copy
the edited result to the output.
.Pp
.It  ed
Like
.Li eb ,
except precede each version with a header that shows what file and lines the
version came from.
.Pp
.It  el
.It  e1
Edit a copy of the left version, then copy the result to the output.
.Pp
.It  er
.It  e2
Edit a copy of the right version, then copy the result to the output.
.Pp
.It  l
.It  1
Copy the left version to the output.
.Pp
.It  q
Quit.
.Pp
.It  r
.It  2
Copy the right version to the output.
.Pp
.It  s
Silently copy common lines.
.Pp
.It  v
Verbosely copy common lines. This is the default.
.El
.Pp
The text editor invoked is specified by the
.Ev EDITOR
environment variable if it is set. The default is system-dependent.
.Pp
.Sh  Merging with Xr patch
.Xr patch
takes comparison output produced by
.Xr diff
and applies the differences to a copy of the original file, producing a patched
version. With
.Xr patch ,
you can distribute just the changes to a set of files instead of distributing
the entire file set; your correspondents can apply
.Xr patch
to update their copy of the files with your changes.
.Xr patch
automatically determines the diff format, skips any leading or trailing headers,
and uses the headers to determine which file to patch. This lets your correspondents
feed a mail message containing a difference listing directly to
.Xr patch .
.Pp
.Xr patch
detects and warns about common problems like forward patches. It saves any
patches that it could not apply. It can also maintain a
.Li patchlevel.h
file to ensure that your correspondents apply diffs in the proper order.
.Pp
.Xr patch
accepts a series of diffs in its standard input, usually separated by headers
that specify which file to patch. It applies
.Xr diff
hunks (see Section
.Dq Hunks )
one by one. If a hunk does not exactly match the original file,
.Xr patch
uses heuristics to try to patch the file as well as it can. If no approximate
match can be found,
.Xr patch
rejects the hunk and skips to the next hunk.
.Xr patch
normally replaces each file
.Va f
with its new version, putting reject hunks (if any) into
.Li  Va f.rej .
.Pp
See Section.Dq Invoking patch ,
for detailed information on the options to
.Xr patch .
.Pp
.Ss  Selecting the Xr patch Input Format
.Xr patch
normally determines which
.Xr diff
format the patch file uses by examining its contents. For patch files that
contain particularly confusing leading text, you might need to use one of
the following options to force
.Xr patch
to interpret the patch file as a certain format of diff. The output formats
listed here are the only ones that
.Xr patch
can understand.
.Pp
.Bl -tag -width Ds
.It  -c
.It  --context
context diff.
.Pp
.It  -e
.It  --ed
.Xr ed
script.
.Pp
.It  -n
.It  --normal
normal diff.
.Pp
.It  -u
.It  --unified
unified diff.
.El
.Pp
.Ss  Revision Control
If a nonexistent input file is under a revision control system supported by
.Xr patch ,
.Xr patch
normally asks the user whether to get (or check out) the file from the revision
control system. Patch currently supports RCS, ClearCase and SCCS. Under RCS
and SCCS,
.Xr patch
also asks when the input file is read-only and matches the default version
in the revision control system.
.Pp
The
.Op -g Va num
or
.Op --get= Va num
option affects access to files under supported revision control systems. If
.Va num
is positive,
.Xr patch
gets the file without asking the user; if zero,
.Xr patch
neither asks the user nor gets the file; and if negative,
.Xr patch
asks the user before getting the file. The default value of
.Va num
is given by the value of the
.Ev PATCH_GET
environment variable if it is set; if not, the default value is zero if
.Xr patch
is conforming to POSIX, negative otherwise.See Section
.Dq patch and POSIX .
.Pp
The choice of revision control system is unaffected by the
.Ev VERSION_CONTROL
environment variable (see Section
.Dq Backup Names ) .
.Pp
.Ss  Applying Imperfect Patches
.Xr patch
tries to skip any leading text in the patch file, apply the diff, and then
skip any trailing text. Thus you can feed a mail message directly to
.Xr patch ,
and it should work. If the entire diff is indented by a constant amount of
white space,
.Xr patch
automatically ignores the indentation. If a context diff contains trailing
carriage return on each line,
.Xr patch
automatically ignores the carriage return. If a context diff has been encapsulated
by prepending
.Li -
to lines beginning with
.Li -
as per
.Lk ftp://ftp.isi.edu/in-notes/rfc934.txt ,
.Xr patch
automatically unencapsulates the input.
.Pp
However, certain other types of imperfect input require user intervention
or testing.
.Pp
.Em  Applying Patches with Changed White Space
.Pp
Sometimes mailers, editors, or other programs change spaces into tabs, or
vice versa. If this happens to a patch file or an input file, the files might
look the same, but
.Xr patch
will not be able to match them properly. If this problem occurs, use the
.Op -l
or
.Op --ignore-white-space
option, which makes
.Xr patch
compare blank characters (i.e. spaces and tabs) loosely so that any nonempty
sequence of blanks in the patch file matches any nonempty sequence of blanks
in the input files. Non-blank characters must still match exactly. Each line
of the context must still match a line in the input file.
.Pp
.Em  Applying Reversed Patches
.Pp
Sometimes people run
.Xr diff
with the new file first instead of second. This creates a diff that is \(lqreversed\(rq.
To apply such patches, give
.Xr patch
the
.Op -R
or
.Op --reverse
option.
.Xr patch
then attempts to swap each hunk around before applying it. Rejects come out
in the swapped format.
.Pp
Often
.Xr patch
can guess that the patch is reversed. If the first hunk of a patch fails,
.Xr patch
reverses the hunk to see if it can apply it that way. If it can,
.Xr patch
asks you if you want to have the
.Op -R
option set; if it can't,
.Xr patch
continues to apply the patch normally. This method cannot detect a reversed
patch if it is a normal diff and the first command is an append (which should
have been a delete) since appends always succeed, because a null context matches
anywhere. But most patches add or change lines rather than delete them, so
most reversed normal diffs begin with a delete, which fails, and
.Xr patch
notices.
.Pp
If you apply a patch that you have already applied,
.Xr patch
thinks it is a reversed patch and offers to un-apply the patch. This could
be construed as a feature. If you did this inadvertently and you don't want
to un-apply the patch, just answer
.Li n
to this offer and to the subsequent \(lqapply anyway\(rq question---or type
.Li C-c
to kill the
.Xr patch
process.
.Pp
.Em  Helping Xr patch Find Inexact Matches
.Pp
For context diffs, and to a lesser extent normal diffs,
.Xr patch
can detect when the line numbers mentioned in the patch are incorrect, and
it attempts to find the correct place to apply each hunk of the patch. As
a first guess, it takes the line number mentioned in the hunk, plus or minus
any offset used in applying the previous hunk. If that is not the correct
place,
.Xr patch
scans both forward and backward for a set of lines matching the context given
in the hunk.
.Pp
First
.Xr patch
looks for a place where all lines of the context match. If it cannot find
such a place, and it is reading a context or unified diff, and the maximum
fuzz factor is set to 1 or more, then
.Xr patch
makes another scan, ignoring the first and last line of context. If that fails,
and the maximum fuzz factor is set to 2 or more, it makes another scan, ignoring
the first two and last two lines of context are ignored. It continues similarly
if the maximum fuzz factor is larger.
.Pp
The
.Op -F Va lines
or
.Op --fuzz= Va lines
option sets the maximum fuzz factor to
.Va lines .
This option only applies to context and unified diffs; it ignores up to
.Va lines
lines while looking for the place to install a hunk. Note that a larger fuzz
factor increases the odds of making a faulty patch. The default fuzz factor
is 2; there is no point to setting it to more than the number of lines of
context in the diff, ordinarily 3.
.Pp
If
.Xr patch
cannot find a place to install a hunk of the patch, it writes the hunk out
to a reject file (see Section
.Dq Reject Names ,
for information on how reject files are named). It writes out rejected hunks
in context format no matter what form the input patch is in. If the input
is a normal or
.Xr ed
diff, many of the contexts are simply null. The line numbers on the hunks
in the reject file may be different from those in the patch file: they show
the approximate location where
.Xr patch
thinks the failed hunks belong in the new file rather than in the old one.
.Pp
If the
.Op --verbose
option is given, then as it completes each hunk
.Xr patch
tells you whether the hunk succeeded or failed, and if it failed, on which
line (in the new file)
.Xr patch
thinks the hunk should go. If this is different from the line number specified
in the diff, it tells you the offset. A single large offset
.Em may
indicate that
.Xr patch
installed a hunk in the wrong place.
.Xr patch
also tells you if it used a fuzz factor to make the match, in which case you
should also be slightly suspicious.
.Pp
.Xr patch
cannot tell if the line numbers are off in an
.Xr ed
script, and can only detect wrong line numbers in a normal diff when it finds
a change or delete command. It may have the same problem with a context diff
using a fuzz factor equal to or greater than the number of lines of context
shown in the diff (typically 3). In these cases, you should probably look
at a context diff between your original and patched input files to see if
the changes make sense. Compiling without errors is a pretty good indication
that the patch worked, but not a guarantee.
.Pp
A patch against an empty file applies to a nonexistent file, and vice versa.See Section
.Dq Creating and Removing .
.Pp
.Xr patch
usually produces the correct results, even when it must make many guesses.
However, the results are guaranteed only when the patch is applied to an exact
copy of the file that the patch was generated from.
.Pp
.Em  Predicting what Xr patch will do
.Pp
It may not be obvious in advance what
.Xr patch
will do with a complicated or poorly formatted patch. If you are concerned
that the input might cause
.Xr patch
to modify the wrong files, you can use the
.Op --dry-run
option, which causes
.Xr patch
to print the results of applying patches without actually changing any files.
You can then inspect the diagnostics generated by the dry run to see whether
.Xr patch
will modify the files that you expect. If the patch does not do what you want,
you can modify the patch (or the other options to
.Xr patch )
and try another dry run. Once you are satisfied with the proposed patch you
can apply it by invoking
.Xr patch
as before, but this time without the
.Op --dry-run
option.
.Pp
.Ss  Creating and Removing Files
Sometimes when comparing two directories, a file may exist in one directory
but not the other. If you give
.Xr diff
the
.Op -N
or
.Op --new-file
option, or if you supply an old or new file that is named
.Pa /dev/null
or is empty and is dated the Epoch (1970-01-01 00:00:00 UTC),
.Xr diff
outputs a patch that adds or deletes the contents of this file. When given
such a patch,
.Xr patch
normally creates a new file or removes the old file. However, when conforming
to POSIX (see Section
.Dq patch and POSIX ) ,
.Xr patch
does not remove the old file, but leaves it empty. The
.Op -E
or
.Op --remove-empty-files
option causes
.Xr patch
to remove output files that are empty after applying a patch, even if the
patch does not appear to be one that removed the file.
.Pp
If the patch appears to create a file that already exists,
.Xr patch
asks for confirmation before applying the patch.
.Pp
.Ss  Updating Time Stamps on Patched Files
When
.Xr patch
updates a file, it normally sets the file's last-modified time stamp to the
current time of day. If you are using
.Xr patch
to track a software distribution, this can cause
.Xr make
to incorrectly conclude that a patched file is out of date. For example, if
.Pa syntax.c
depends on
.Pa syntax.y ,
and
.Xr patch
updates
.Pa syntax.c
and then
.Pa syntax.y ,
then
.Pa syntax.c
will normally appear to be out of date with respect to
.Pa syntax.y
even though its contents are actually up to date.
.Pp
The
.Op -Z
or
.Op --set-utc
option causes
.Xr patch
to set a patched file's modification and access times to the time stamps given
in context diff headers. If the context diff headers do not specify a time
zone, they are assumed to use Coordinated Universal Time (UTC, often known
as GMT).
.Pp
The
.Op -T
or
.Op --set-time
option acts like
.Op -Z
or
.Op --set-utc ,
except that it assumes that the context diff headers' time stamps use local
time instead of UTC. This option is not recommended, because patches using
local time cannot easily be used by people in other time zones, and because
local time stamps are ambiguous when local clocks move backwards during daylight-saving
time adjustments. If the context diff headers specify a time zone, this option
is equivalent to
.Op -Z
or
.Op --set-utc .
.Pp
.Xr patch
normally refrains from setting a file's time stamps if the file's original
last-modified time stamp does not match the time given in the diff header,
of if the file's contents do not exactly match the patch. However, if the
.Op -f
or
.Op --force
option is given, the file's time stamps are set regardless.
.Pp
Due to the limitations of the current
.Xr diff
format,
.Xr patch
cannot update the times of files whose contents have not changed. Also, if
you set file time stamps to values other than the current time of day, you
should also remove (e.g., with
.Li make clean )
all files that depend on the patched files, so that later invocations of
.Xr make
do not get confused by the patched files' times.
.Pp
.Ss  Multiple Patches in a File
If the patch file contains more than one patch, and if you do not specify
an input file on the command line,
.Xr patch
tries to apply each patch as if they came from separate patch files. This
means that it determines the name of the file to patch for each patch, and
that it examines the leading text before each patch for file names and prerequisite
revision level (see Section
.Dq Making Patches ,
for more on that topic).
.Pp
.Xr patch
uses the following rules to intuit a file name from the leading text before
a patch. First,
.Xr patch
takes an ordered list of candidate file names as follows:
.Pp
.Bl -bullet
.It
If the header is that of a context diff,
.Xr patch
takes the old and new file names in the header. A name is ignored if it does
not have enough slashes to satisfy the
.Op -p Va num
or
.Op --strip= Va num
option. The name
.Pa /dev/null
is also ignored.
.Pp
.It
If there is an
.Li Index:
line in the leading garbage and if either the old and new names are both absent
or if
.Xr patch
is conforming to POSIX,
.Xr patch
takes the name in the
.Li Index:
line.
.Pp
.It
For the purpose of the following rules, the candidate file names are considered
to be in the order (old, new, index), regardless of the order that they appear
in the header.
.El
.Pp
Then
.Xr patch
selects a file name from the candidate list as follows:
.Pp
.Bl -bullet
.It
If some of the named files exist,
.Xr patch
selects the first name if conforming to POSIX, and the best name otherwise.
.Pp
.It
If
.Xr patch
is not ignoring RCS, ClearCase, and SCCS (see Section
.Dq Revision Control ) ,
and no named files exist but an RCS, ClearCase, or SCCS master is found,
.Xr patch
selects the first named file with an RCS, ClearCase, or SCCS master.
.Pp
.It
If no named files exist, no RCS, ClearCase, or SCCS master was found, some
names are given,
.Xr patch
is not conforming to POSIX, and the patch appears to create a file,
.Xr patch
selects the best name requiring the creation of the fewest directories.
.Pp
.It
If no file name results from the above heuristics, you are asked for the name
of the file to patch, and
.Xr patch
selects that name.
.El
.Pp
To determine the
.Em best
of a nonempty list of file names,
.Xr patch
first takes all the names with the fewest path name components; of those,
it then takes all the names with the shortest basename; of those, it then
takes all the shortest names; finally, it takes the first remaining name.
.Pp
See Section.Dq patch and POSIX ,
to see whether
.Xr patch
is conforming to POSIX.
.Pp
.Ss  Applying Patches in Other Directories
The
.Op -d Va directory
or
.Op --directory= Va directory
option to
.Xr patch
makes directory
.Va directory
the current directory for interpreting both file names in the patch file,
and file names given as arguments to other options (such as
.Op -B
and
.Op -o ) .
For example, while in a mail reading program, you can patch a file in the
.Pa /usr/src/emacs
directory directly from a message containing the patch like this:
.Pp
.Bd -literal -offset indent
| patch -d /usr/src/emacs
.Ed
.Pp
Sometimes the file names given in a patch contain leading directories, but
you keep your files in a directory different from the one given in the patch.
In those cases, you can use the
.Op -p Va number
or
.Op --strip= Va number
option to set the file name strip count to
.Va number .
The strip count tells
.Xr patch
how many slashes, along with the directory names between them, to strip from
the front of file names. A sequence of one or more adjacent slashes is counted
as a single slash. By default,
.Xr patch
strips off all leading directories, leaving just the base file names.
.Pp
For example, suppose the file name in the patch file is
.Pa /gnu/src/emacs/etc/NEWS .
Using
.Op -p0
gives the entire file name unmodified,
.Op -p1
gives
.Pa gnu/src/emacs/etc/NEWS
(no leading slash),
.Op -p4
gives
.Pa etc/NEWS ,
and not specifying
.Op -p
at all gives
.Pa NEWS .
.Pp
.Xr patch
looks for each file (after any slashes have been stripped) in the current
directory, or if you used the
.Op -d Va directory
option, in that directory.
.Pp
.Ss  Backup Files
Normally,
.Xr patch
creates a backup file if the patch does not exactly match the original input
file, because in that case the original data might not be recovered if you
undo the patch with
.Li patch -R
(see Section
.Dq Reversed Patches ) .
However, when conforming to POSIX,
.Xr patch
does not create backup files by default.See Section
.Dq patch and POSIX .
.Pp
The
.Op -b
or
.Op --backup
option causes
.Xr patch
to make a backup file regardless of whether the patch matches the original
input. The
.Op --backup-if-mismatch
option causes
.Xr patch
to create backup files for mismatches files; this is the default when not
conforming to POSIX. The
.Op --no-backup-if-mismatch
option causes
.Xr patch
to not create backup files, even for mismatched patches; this is the default
when conforming to POSIX.
.Pp
When backing up a file that does not exist, an empty, unreadable backup file
is created as a placeholder to represent the nonexistent file.
.Pp
.Ss  Backup File Names
Normally,
.Xr patch
renames an original input file into a backup file by appending to its name
the extension
.Li .orig ,
or
.Li ~
if using
.Li .orig
would make the backup file name too long. The
.Op -z Va backup-suffix
or
.Op --suffix= Va backup-suffix
option causes
.Xr patch
to use
.Va backup-suffix
as the backup extension instead.
.Pp
Alternately, you can specify the extension for backup files with the
.Ev SIMPLE_BACKUP_SUFFIX
environment variable, which the options override.
.Pp
.Xr patch
can also create numbered backup files the way GNU Emacs does. With this method,
instead of having a single backup of each file,
.Xr patch
makes a new backup file name each time it patches a file. For example, the
backups of a file named
.Pa sink
would be called, successively,
.Pa sink.~1~ ,
.Pa sink.~2~ ,
.Pa sink.~3~ ,
etc.
.Pp
The
.Op -V Va backup-style
or
.Op --version-control= Va backup-style
option takes as an argument a method for creating backup file names. You can
alternately control the type of backups that
.Xr patch
makes with the
.Ev PATCH_VERSION_CONTROL
environment variable, which the
.Op -V
option overrides. If
.Ev PATCH_VERSION_CONTROL
is not set, the
.Ev VERSION_CONTROL
environment variable is used instead. Please note that these options and variables
control backup file names; they do not affect the choice of revision control
system (see Section
.Dq Revision Control ) .
.Pp
The values of these environment variables and the argument to the
.Op -V
option are like the GNU Emacs
.Li version-control
variable (see Section
.Dq Backup Names ,
for more information on backup versions in Emacs). They also recognize synonyms
that are more descriptive. The valid values are listed below; unique abbreviations
are acceptable.
.Pp
.Bl -tag -width Ds
.It  t
.It  numbered
Always make numbered backups.
.Pp
.It  nil
.It  existing
Make numbered backups of files that already have them, simple backups of the
others. This is the default.
.Pp
.It  never
.It  simple
Always make simple backups.
.El
.Pp
You can also tell
.Xr patch
to prepend a prefix, such as a directory name, to produce backup file names.
The
.Op -B Va prefix
or
.Op --prefix= Va prefix
option makes backup files by prepending
.Va prefix
to them. The
.Op -Y Va prefix
or
.Op --basename-prefix= Va prefix
prepends
.Va prefix
to the last file name component of backup file names instead; for example,
.Op -Y ~
causes the backup name for
.Pa dir/file.c
to be
.Pa dir/~file.c .
If you use either of these prefix options, the suffix-based options are ignored.
.Pp
If you specify the output file with the
.Op -o
option, that file is the one that is backed up, not the input file.
.Pp
Options that affect the names of backup files do not affect whether backups
are made. For example, if you specify the
.Op --no-backup-if-mismatch
option, none of the options described in this section have any affect, because
no backups are made.
.Pp
.Ss  Reject File Names
The names for reject files (files containing patches that
.Xr patch
could not find a place to apply) are normally the name of the output file
with
.Li .rej
appended (or
.Li #
if using
.Li .rej
would make the backup file name too long).
.Pp
Alternatively, you can tell
.Xr patch
to place all of the rejected patches in a single file. The
.Op -r Va reject-file
or
.Op --reject-file= Va reject-file
option uses
.Va reject-file
as the reject file name.
.Pp
.Ss  Messages and Questions from Xr patch
.Xr patch
can produce a variety of messages, especially if it has trouble decoding its
input. In a few situations where it's not sure how to proceed,
.Xr patch
normally prompts you for more information from the keyboard. There are options
to produce more or fewer messages, to have it not ask for keyboard input,
and to affect the way that file names are quoted in messages.
.Pp
.Xr patch
exits with status 0 if all hunks are applied successfully, 1 if some hunks
cannot be applied, and 2 if there is more serious trouble. When applying a
set of patches in a loop, you should check the exit status, so you don't apply
a later patch to a partially patched file.
.Pp
.Em  Controlling the Verbosity of Xr patch
.Pp
You can cause
.Xr patch
to produce more messages by using the
.Op --verbose
option. For example, when you give this option, the message
.Li Hmm...
indicates that
.Xr patch
is reading text in the patch file, attempting to determine whether there is
a patch in that text, and if so, what kind of patch it is.
.Pp
You can inhibit all terminal output from
.Xr patch ,
unless an error occurs, by using the
.Op -s ,
.Op --quiet ,
or
.Op --silent
option.
.Pp
.Em  Inhibiting Keyboard Input
.Pp
There are two ways you can prevent
.Xr patch
from asking you any questions. The
.Op -f
or
.Op --force
option assumes that you know what you are doing. It causes
.Xr patch
to do the following:
.Pp
.Bl -bullet
.It
Skip patches that do not contain file names in their headers.
.Pp
.It
Patch files even though they have the wrong version for the
.Li Prereq:
line in the patch;
.Pp
.It
Assume that patches are not reversed even if they look like they are.
.El
.Pp
The
.Op -t
or
.Op --batch
option is similar to
.Op -f ,
in that it suppresses questions, but it makes somewhat different assumptions:
.Pp
.Bl -bullet
.It
Skip patches that do not contain file names in their headers (the same as
.Op -f ) .
.Pp
.It
Skip patches for which the file has the wrong version for the
.Li Prereq:
line in the patch;
.Pp
.It
Assume that patches are reversed if they look like they are.
.El
.Pp
.Em  Xr patch Quoting Style
.Pp
When
.Xr patch
outputs a file name in a diagnostic message, it can format the name in any
of several ways. This can be useful to output file names unambiguously, even
if they contain punctuation or special characters like newlines. The
.Op --quoting-style= Va word
option controls how names are output. The
.Va word
should be one of the following:
.Pp
.Bl -tag -width Ds
.It  literal
Output names as-is.
.It  shell
Quote names for the shell if they contain shell metacharacters or would cause
ambiguous output.
.It  shell-always
Quote names for the shell, even if they would normally not require quoting.
.It  c
Quote names as for a C language string.
.It  escape
Quote as with
.Li c
except omit the surrounding double-quote characters.
.El
.Pp
You can specify the default value of the
.Op --quoting-style
option with the environment variable
.Ev QUOTING_STYLE .
If that environment variable is not set, the default value is
.Li shell ,
but this default may change in a future version of
.Xr patch .
.Pp
.Ss  Xr patch and the POSIX Standard
If you specify the
.Op --posix
option, or set the
.Ev POSIXLY_CORRECT
environment variable,
.Xr patch
conforms more strictly to the POSIX standard, as follows:
.Pp
.Bl -bullet
.It
Take the first existing file from the list (old, new, index) when intuiting
file names from diff headers.See Section
.Dq Multiple Patches .
.Pp
.It
Do not remove files that are removed by a diff.See Section
.Dq Creating and Removing .
.Pp
.It
Do not ask whether to get files from RCS, ClearCase, or SCCS.See Section
.Dq Revision Control .
.Pp
.It
Require that all options precede the files in the command line.
.Pp
.It
Do not backup files, even when there is a mismatch.See Section
.Dq Backups .
.Pp
.El
.Ss  GNU Xr patch and Traditional Xr patch
The current version of GNU
.Xr patch
normally follows the POSIX standard.See Section
.Dq patch and POSIX ,
for the few exceptions to this general rule.
.Pp
Unfortunately, POSIX redefined the behavior of
.Xr patch
in several important ways. You should be aware of the following differences
if you must interoperate with traditional
.Xr patch ,
or with GNU
.Xr patch
version 2.1 and earlier.
.Pp
.Bl -bullet
.It
In traditional
.Xr patch ,
the
.Op -p
option's operand was optional, and a bare
.Op -p
was equivalent to
.Op -p0 .
The
.Op -p
option now requires an operand, and
.Op -p 0
is now equivalent to
.Op -p0 .
For maximum compatibility, use options like
.Op -p0
and
.Op -p1 .
.Pp
Also, traditional
.Xr patch
simply counted slashes when stripping path prefixes;
.Xr patch
now counts pathname components. That is, a sequence of one or more adjacent
slashes now counts as a single slash. For maximum portability, avoid sending
patches containing
.Pa //
in file names.
.Pp
.It
In traditional
.Xr patch ,
backups were enabled by default. This behavior is now enabled with the
.Op -b
or
.Op --backup
option.
.Pp
Conversely, in POSIX
.Xr patch ,
backups are never made, even when there is a mismatch. In GNU
.Xr patch ,
this behavior is enabled with the
.Op --no-backup-if-mismatch
option, or by conforming to POSIX.
.Pp
The
.Op -b  Va suffix
option of traditional
.Xr patch
is equivalent to the
.Li -b -z  Va suffix
options of GNU
.Xr patch .
.Pp
.It
Traditional
.Xr patch
used a complicated (and incompletely documented) method to intuit the name
of the file to be patched from the patch header. This method did not conform
to POSIX, and had a few gotchas. Now
.Xr patch
uses a different, equally complicated (but better documented) method that
is optionally POSIX-conforming; we hope it has fewer gotchas. The two methods
are compatible if the file names in the context diff header and the
.Li Index:
line are all identical after prefix-stripping. Your patch is normally compatible
if each header's file names all contain the same number of slashes.
.Pp
.It
When traditional
.Xr patch
asked the user a question, it sent the question to standard error and looked
for an answer from the first file in the following list that was a terminal:
standard error, standard output,
.Pa /dev/tty ,
and standard input. Now
.Xr patch
sends questions to standard output and gets answers from
.Pa /dev/tty .
Defaults for some answers have been changed so that
.Xr patch
never goes into an infinite loop when using default answers.
.Pp
.It
Traditional
.Xr patch
exited with a status value that counted the number of bad hunks, or with status
1 if there was real trouble. Now
.Xr patch
exits with status 1 if some hunks failed, or with 2 if there was real trouble.
.Pp
.It
Limit yourself to the following options when sending instructions meant to
be executed by anyone running GNU
.Xr patch ,
traditional
.Xr patch ,
or a
.Xr patch
that conforms to POSIX. Spaces are significant in the following list, and
operands are required.
.Pp
.Bd -literal -offset indent
-c
-d dir
-D define
-e
-l
-n
-N
-o outfile
-pnum
-R
-r rejectfile
.Ed
.Pp
.El
.Sh  Tips for Making and Using Patches
Use some common sense when making and using patches. For example, when sending
bug fixes to a program's maintainer, send several small patches, one per independent
subject, instead of one large, harder-to-digest patch that covers all the
subjects.
.Pp
Here are some other things you should keep in mind if you are going to distribute
patches for updating a software package.
.Pp
.Ss  Tips for Patch Producers
To create a patch that changes an older version of a package into a newer
version, first make a copy of the older and newer versions in adjacent subdirectories.
It is common to do that by unpacking
.Xr tar
archives of the two versions.
.Pp
To generate the patch, use the command
.Li diff -Naur Va old Va new
where
.Va old
and
.Va new
identify the old and new directories. The names
.Va old
and
.Va new
should not contain any slashes. The
.Op -N
option lets the patch create and remove files;
.Op -a
lets the patch update non-text files;
.Op -u
generates useful time stamps and enough context; and
.Op -r
lets the patch update subdirectories. Here is an example command, using Bourne
shell syntax:
.Pp
.Bd -literal -offset indent
diff -Naur gcc-3.0.3 gcc-3.0.4
.Ed
.Pp
Tell your recipients how to apply the patches. This should include which working
directory to use, and which
.Xr patch
options to use; the option
.Li -p1
is recommended. Test your procedure by pretending to be a recipient and applying
your patches to a copy of the original files.
.Pp
See Section.Dq Avoiding Common Mistakes ,
for how to avoid common mistakes when generating a patch.
.Pp
.Ss  Tips for Patch Consumers
A patch producer should tell recipients how to apply the patches, so the first
rule of thumb for a patch consumer is to follow the instructions supplied
with the patch.
.Pp
GNU
.Xr diff
can analyze files with arbitrarily long lines and files that end in incomplete
lines. However, older versions of
.Xr patch
cannot patch such files. If you are having trouble applying such patches,
try upgrading to a recent version of GNU
.Xr patch .
.Pp
.Ss  Avoiding Common Mistakes
When producing a patch for multiple files, apply
.Xr diff
to directories whose names do not have slashes. This reduces confusion when
the patch consumer specifies the
.Op -p Va number
option, since this option can have surprising results when the old and new
file names have different numbers of slashes. For example, do not send a patch
with a header that looks like this:
.Pp
.Bd -literal -offset indent
diff -Naur v2.0.29/prog/README prog/README
--- v2.0.29/prog/README	2002-03-10 23:30:39.942229878 -0800
+++ prog/README	2002-03-17 20:49:32.442260588 -0800
.Ed
.Pp
because the two file names have different numbers of slashes, and different
versions of
.Xr patch
interpret the file names differently. To avoid confusion, send output that
looks like this instead:
.Pp
.Bd -literal -offset indent
diff -Naur v2.0.29/prog/README v2.0.30/prog/README
--- v2.0.29/prog/README	2002-03-10 23:30:39.942229878 -0800
+++ v2.0.30/prog/README	2002-03-17 20:49:32.442260588 -0800
.Ed
.Pp
Make sure you have specified the file names correctly, either in a context
diff header or with an
.Li Index:
line. Take care to not send out reversed patches, since these make people
wonder whether they have already applied the patch.
.Pp
Avoid sending patches that compare backup file names like
.Pa README.orig
or
.Pa README~ ,
since this might confuse
.Xr patch
into patching a backup file instead of the real file. Instead, send patches
that compare the same base file names in different directories, e.g.
.Pa old/README
and
.Pa new/README .
.Pp
To save people from partially applying a patch before other patches that should
have gone before it, you can make the first patch in the patch file update
a file with a name like
.Pa patchlevel.h
or
.Pa version.c ,
which contains a patch level or version number. If the input file contains
the wrong version number,
.Xr patch
will complain immediately.
.Pp
An even clearer way to prevent this problem is to put a
.Li Prereq:
line before the patch. If the leading text in the patch file contains a line
that starts with
.Li Prereq: ,
.Xr patch
takes the next word from that line (normally a version number) and checks
whether the next input file contains that word, preceded and followed by either
white space or a newline. If not,
.Xr patch
prompts you for confirmation before proceeding. This makes it difficult to
accidentally apply patches in the wrong order.
.Pp
.Ss  Generating Smaller Patches
The simplest way to generate a patch is to use
.Li diff -Naur
(see Section
.Dq Tips for Patch Producers ) ,
but you might be able to reduce the size of the patch by renaming or removing
some files before making the patch. If the older version of the package contains
any files that the newer version does not, or if any files have been renamed
between the two versions, make a list of
.Xr rm
and
.Xr mv
commands for the user to execute in the old version directory before applying
the patch. Then run those commands yourself in the scratch directory.
.Pp
If there are any files that you don't need to include in the patch because
they can easily be rebuilt from other files (for example,
.Pa TAGS
and output from
.Xr yacc
and
.Xr makeinfo ) ,
exclude them from the patch by giving
.Xr diff
the
.Op -x Va pattern
option (see Section
.Dq Comparing Directories ) .
If you want your patch to modify a derived file because your recipients lack
tools to build it, make sure that the patch for the derived file follows any
patches for files that it depends on, so that the recipients' time stamps
will not confuse
.Xr make .
.Pp
Now you can create the patch using
.Li diff -Naur .
Make sure to specify the scratch directory first and the newer directory second.
.Pp
Add to the top of the patch a note telling the user any
.Xr rm
and
.Xr mv
commands to run before applying the patch. Then you can remove the scratch
directory.
.Pp
You can also shrink the patch size by using fewer lines of context, but bear
in mind that
.Xr patch
typically needs at least two lines for proper operation when patches do not
exactly match the input files.
.Pp
.Sh  Invoking Xr cmp
The
.Xr cmp
command compares two files, and if they differ, tells the first byte and line
number where they differ or reports that one file is a prefix of the other.
Bytes and lines are numbered starting with 1. The arguments of
.Xr cmp
are as follows:
.Pp
.Bd -literal -offset indent
cmp options... from-file [to-file [from-skip [to-skip]]]
.Ed
.Pp
The file name
.Pa -
is always the standard input.
.Xr cmp
also uses the standard input if one file name is omitted. The
.Va from-skip
and
.Va to-skip
operands specify how many bytes to ignore at the start of each file; they
are equivalent to the
.Op --ignore-initial= Va from-skip: Va to-skip
option.
.Pp
By default,
.Xr cmp
outputs nothing if the two files have the same contents. If one file is a
prefix of the other,
.Xr cmp
prints to standard error a message of the following form:
.Pp
.Bd -literal -offset indent
cmp: EOF on shorter-file
.Ed
.Pp
Otherwise,
.Xr cmp
prints to standard output a message of the following form:
.Pp
.Bd -literal -offset indent
from-file to-file differ: char byte-number, line line-number
.Ed
.Pp
The message formats can differ outside the POSIX locale. Also, POSIX allows
the EOF message to be followed by a blank and some additional information.
.Pp
An exit status of 0 means no differences were found, 1 means some differences
were found, and 2 means trouble.
.Pp
.Ss  Options to Xr cmp
Below is a summary of all of the options that GNU
.Xr cmp
accepts. Most options have two equivalent names, one of which is a single
letter preceded by
.Li - ,
and the other of which is a long name preceded by
.Li -- .
Multiple single letter options (unless they take an argument) can be combined
into a single command line word:
.Op -bl
is equivalent to
.Op -b -l .
.Pp
.Bl -tag -width Ds
.It  -b
.It  --print-bytes
Print the differing bytes. Display control bytes as a
.Li ^
followed by a letter of the alphabet and precede bytes that have the high
bit set with
.Li M-
(which stands for \(lqmeta\(rq).
.Pp
.It  --help
Output a summary of usage and then exit.
.Pp
.It  -i Va skip
.It  --ignore-initial= Va skip
Ignore any differences in the first
.Va skip
bytes of the input files. Treat files with fewer than
.Va skip
bytes as if they are empty. If
.Va skip
is of the form
.Op  Va from-skip: Va to-skip ,
skip the first
.Va from-skip
bytes of the first input file and the first
.Va to-skip
bytes of the second.
.Pp
.It  -l
.It  --verbose
Output the (decimal) byte numbers and (octal) values of all differing bytes,
instead of the default standard output.
.Pp
.It  -n Va count
.It  --bytes= Va count
Compare at most
.Va count
input bytes.
.Pp
.It  -s
.It  --quiet
.It  --silent
Do not print anything; only return an exit status indicating whether the files
differ.
.Pp
.It  -v
.It  --version
Output version information and then exit.
.El
.Pp
In the above table, operands that are byte counts are normally decimal, but
may be preceded by
.Li 0
for octal and
.Li 0x
for hexadecimal.
.Pp
A byte count can be followed by a suffix to specify a multiple of that count;
in this case an omitted integer is understood to be 1. A bare size letter,
or one followed by
.Li iB ,
specifies a multiple using powers of 1024. A size letter followed by
.Li B
specifies powers of 1000 instead. For example,
.Op -n 4M
and
.Op -n 4MiB
are equivalent to
.Op -n 4194304 ,
whereas
.Op -n 4MB
is equivalent to
.Op -n 4000000 .
This notation is upward compatible with the
.Lk http://www.bipm.fr/enus/3_SI/si-prefixes.html
for decimal multiples and with the
.Lk http://physics.nist.gov/cuu/Units/binary.html .
.Pp
The following suffixes are defined. Large sizes like
.Li 1Y
may be rejected by your computer due to limitations of its arithmetic.
.Pp
.Bl -tag -width Ds
.It  kB
kilobyte: 10^3 = 1000.
.It  k
.It  K
.It  KiB
kibibyte: 2^10 = 1024.
.Li K
is special: the SI prefix is
.Li k
and the IEC 60027-2 prefix is
.Li Ki ,
but tradition and POSIX use
.Li k
to mean
.Li KiB .
.It  MB
megabyte: 10^6 = 1,000,000.
.It  M
.It  MiB
mebibyte: 2^20 = 1,048,576.
.It  GB
gigabyte: 10^9 = 1,000,000,000.
.It  G
.It  GiB
gibibyte: 2^30 = 1,073,741,824.
.It  TB
terabyte: 10^12 = 1,000,000,000,000.
.It  T
.It  TiB
tebibyte: 2^40 = 1,099,511,627,776.
.It  PB
petabyte: 10^15 = 1,000,000,000,000,000.
.It  P
.It  PiB
pebibyte: 2^50 = 1,125,899,906,842,624.
.It  EB
exabyte: 10^18 = 1,000,000,000,000,000,000.
.It  E
.It  EiB
exbibyte: 2^60 = 1,152,921,504,606,846,976.
.It  ZB
zettabyte: 10^21 = 1,000,000,000,000,000,000,000
.It  Z
.It  ZiB
2^70 = 1,180,591,620,717,411,303,424. (
.Li Zi
is a GNU extension to IEC 60027-2.)
.It  YB
yottabyte: 10^24 = 1,000,000,000,000,000,000,000,000.
.It  Y
.It  YiB
2^80 = 1,208,925,819,614,629,174,706,176. (
.Li Yi
is a GNU extension to IEC 60027-2.)
.El
.Pp
.Sh  Invoking Xr diff
The format for running the
.Xr diff
command is:
.Pp
.Bd -literal -offset indent
diff options... files...
.Ed
.Pp
In the simplest case, two file names
.Va from-file
and
.Va to-file
are given, and
.Xr diff
compares the contents of
.Va from-file
and
.Va to-file .
A file name of
.Pa -
stands for text read from the standard input. As a special case,
.Li diff - -
compares a copy of standard input to itself.
.Pp
If one file is a directory and the other is not,
.Xr diff
compares the file in the directory whose name is that of the non-directory.
The non-directory file must not be
.Pa - .
.Pp
If two file names are given and both are directories,
.Xr diff
compares corresponding files in both directories, in alphabetical order; this
comparison is not recursive unless the
.Op -r
or
.Op --recursive
option is given.
.Xr diff
never compares the actual contents of a directory as if it were a file. The
file that is fully specified may not be standard input, because standard input
is nameless and the notion of \(lqfile with the same name\(rq does not apply.
.Pp
If the
.Op --from-file= Va file
option is given, the number of file names is arbitrary, and
.Va file
is compared to each named file. Similarly, if the
.Op --to-file= Va file
option is given, each named file is compared to
.Va file .
.Pp
.Xr diff
options begin with
.Li - ,
so normally file names may not begin with
.Li - .
However,
.Op --
as an argument by itself treats the remaining arguments as file names even
if they begin with
.Li - .
.Pp
An exit status of 0 means no differences were found, 1 means some differences
were found, and 2 means trouble. Normally, differing binary files count as
trouble, but this can be altered by using the
.Op -a
or
.Op --text
option, or the
.Op -q
or
.Op --brief
option.
.Pp
.Ss  Options to Xr diff
Below is a summary of all of the options that GNU
.Xr diff
accepts. Most options have two equivalent names, one of which is a single
letter preceded by
.Li - ,
and the other of which is a long name preceded by
.Li -- .
Multiple single letter options (unless they take an argument) can be combined
into a single command line word:
.Op -ac
is equivalent to
.Op -a -c .
Long named options can be abbreviated to any unique prefix of their name.
Brackets ([ and ]) indicate that an option takes an optional argument.
.Pp
.Bl -tag -width Ds
.It  -a
.It  --text
Treat all files as text and compare them line-by-line, even if they do not
seem to be text.See Section
.Dq Binary .
.Pp
.It  -b
.It  --ignore-space-change
Ignore changes in amount of white space.See Section
.Dq White Space .
.Pp
.It  -B
.It  --ignore-blank-lines
Ignore changes that just insert or delete blank lines.See Section
.Dq Blank Lines .
.Pp
.It  --binary
Read and write data in binary mode.See Section
.Dq Binary .
.Pp
.It  -c
Use the context output format, showing three lines of context.See Section
.Dq Context Format .
.Pp
.It  -C Va lines
.It  --context[= Va lines]
Use the context output format, showing
.Va lines
(an integer) lines of context, or three if
.Va lines
is not given.See Section
.Dq Context Format .
For proper operation,
.Xr patch
typically needs at least two lines of context.
.Pp
On older systems,
.Xr diff
supports an obsolete option
.Op - Va lines
that has effect when combined with
.Op -c
or
.Op -p .
POSIX 1003.1-2001 (see Section
.Dq Standards conformance )
does not allow this; use
.Op -C Va lines
instead.
.Pp
.It  --changed-group-format= Va format
Use
.Va format
to output a line group containing differing lines from both files in if-then-else
format.See Section
.Dq Line Group Formats .
.Pp
.It  -d
.It  --minimal
Change the algorithm perhaps find a smaller set of changes. This makes
.Xr diff
slower (sometimes much slower).See Section
.Dq diff Performance .
.Pp
.It  -D Va name
.It  --ifdef= Va name
Make merged
.Li #ifdef
format output, conditional on the preprocessor macro
.Va name .
See Section.Dq If-then-else .
.Pp
.It  -e
.It  --ed
Make output that is a valid
.Xr ed
script.See Section
.Dq ed Scripts .
.Pp
.It  -E
.It  --ignore-tab-expansion
Ignore changes due to tab expansion.See Section
.Dq White Space .
.Pp
.It  -f
.It  --forward-ed
Make output that looks vaguely like an
.Xr ed
script but has changes in the order they appear in the file.See Section
.Dq Forward ed .
.Pp
.It  -F Va regexp
.It  --show-function-line= Va regexp
In context and unified format, for each hunk of differences, show some of
the last preceding line that matches
.Va regexp .
See Section.Dq Specified Headings .
.Pp
.It  --from-file= Va file
Compare
.Va file
to each operand;
.Va file
may be a directory.
.Pp
.It  --help
Output a summary of usage and then exit.
.Pp
.It  --horizon-lines= Va lines
Do not discard the last
.Va lines
lines of the common prefix and the first
.Va lines
lines of the common suffix.See Section
.Dq diff Performance .
.Pp
.It  -i
.It  --ignore-case
Ignore changes in case; consider upper- and lower-case letters equivalent.See Section
.Dq Case Folding .
.Pp
.It  -I Va regexp
.It  --ignore-matching-lines= Va regexp
Ignore changes that just insert or delete lines that match
.Va regexp .
See Section.Dq Specified Lines .
.Pp
.It  --ignore-file-name-case
Ignore case when comparing file names during recursive comparison.See Section
.Dq Comparing Directories .
.Pp
.It  -l
.It  --paginate
Pass the output through
.Xr pr
to paginate it.See Section
.Dq Pagination .
.Pp
.It  --label= Va label
Use
.Va label
instead of the file name in the context format (see Section
.Dq Context Format )
and unified format (see Section
.Dq Unified Format )
headers.See Section
.Dq RCS .
.Pp
.It  --left-column
Print only the left column of two common lines in side by side format.See Section
.Dq Side by Side Format .
.Pp
.It  --line-format= Va format
Use
.Va format
to output all input lines in if-then-else format.See Section
.Dq Line Formats .
.Pp
.It  -n
.It  --rcs
Output RCS-format diffs; like
.Op -f
except that each command specifies the number of lines affected.See Section
.Dq RCS .
.Pp
.It  -N
.It  --new-file
In directory comparison, if a file is found in only one directory, treat it
as present but empty in the other directory.See Section
.Dq Comparing Directories .
.Pp
.It  --new-group-format= Va format
Use
.Va format
to output a group of lines taken from just the second file in if-then-else
format.See Section
.Dq Line Group Formats .
.Pp
.It  --new-line-format= Va format
Use
.Va format
to output a line taken from just the second file in if-then-else format.See Section
.Dq Line Formats .
.Pp
.It  --old-group-format= Va format
Use
.Va format
to output a group of lines taken from just the first file in if-then-else
format.See Section
.Dq Line Group Formats .
.Pp
.It  --old-line-format= Va format
Use
.Va format
to output a line taken from just the first file in if-then-else format.See Section
.Dq Line Formats .
.Pp
.It  -p
.It  --show-c-function
Show which C function each change is in.See Section
.Dq C Function Headings .
.Pp
.It  -q
.It  --brief
Report only whether the files differ, not the details of the differences.See Section
.Dq Brief .
.Pp
.It  -r
.It  --recursive
When comparing directories, recursively compare any subdirectories found.See Section
.Dq Comparing Directories .
.Pp
.It  -s
.It  --report-identical-files
Report when two files are the same.See Section
.Dq Comparing Directories .
.Pp
.It  -S Va file
.It  --starting-file= Va file
When comparing directories, start with the file
.Va file .
This is used for resuming an aborted comparison.See Section
.Dq Comparing Directories .
.Pp
.It  --speed-large-files
Use heuristics to speed handling of large files that have numerous scattered
small changes.See Section
.Dq diff Performance .
.Pp
.It  --strip-trailing-cr
Strip any trailing carriage return at the end of an input line.See Section
.Dq Binary .
.Pp
.It  --suppress-common-lines
Do not print common lines in side by side format.See Section
.Dq Side by Side Format .
.Pp
.It  -t
.It  --expand-tabs
Expand tabs to spaces in the output, to preserve the alignment of tabs in
the input files.See Section
.Dq Tabs .
.Pp
.It  -T
.It  --initial-tab
Output a tab rather than a space before the text of a line in normal or context
format. This causes the alignment of tabs in the line to look normal.See Section
.Dq Tabs .
.Pp
.It  --tabsize= Va columns
Assume that tab stops are set every
.Va columns
(default 8) print columns.See Section
.Dq Tabs .
.Pp
.It  --to-file= Va file
Compare each operand to
.Va file
;
.Va file
may be a directory.
.Pp
.It  -u
Use the unified output format, showing three lines of context.See Section
.Dq Unified Format .
.Pp
.It  --unchanged-group-format= Va format
Use
.Va format
to output a group of common lines taken from both files in if-then-else format.See Section
.Dq Line Group Formats .
.Pp
.It  --unchanged-line-format= Va format
Use
.Va format
to output a line common to both files in if-then-else format.See Section
.Dq Line Formats .
.Pp
.It  --unidirectional-new-file
When comparing directories, if a file appears only in the second directory
of the two, treat it as present but empty in the other.See Section
.Dq Comparing Directories .
.Pp
.It  -U Va lines
.It  --unified[= Va lines]
Use the unified output format, showing
.Va lines
(an integer) lines of context, or three if
.Va lines
is not given.See Section
.Dq Unified Format .
For proper operation,
.Xr patch
typically needs at least two lines of context.
.Pp
On older systems,
.Xr diff
supports an obsolete option
.Op - Va lines
that has effect when combined with
.Op -u .
POSIX 1003.1-2001 (see Section
.Dq Standards conformance )
does not allow this; use
.Op -U Va lines
instead.
.Pp
.It  -v
.It  --version
Output version information and then exit.
.Pp
.It  -w
.It  --ignore-all-space
Ignore white space when comparing lines.See Section
.Dq White Space .
.Pp
.It  -W Va columns
.It  --width= Va columns
Output at most
.Va columns
(default 130) print columns per line in side by side format.See Section
.Dq Side by Side Format .
.Pp
.It  -x Va pattern
.It  --exclude= Va pattern
When comparing directories, ignore files and subdirectories whose basenames
match
.Va pattern .
See Section.Dq Comparing Directories .
.Pp
.It  -X Va file
.It  --exclude-from= Va file
When comparing directories, ignore files and subdirectories whose basenames
match any pattern contained in
.Va file .
See Section.Dq Comparing Directories .
.Pp
.It  -y
.It  --side-by-side
Use the side by side output format.See Section
.Dq Side by Side Format .
.El
.Pp
.Sh  Invoking Xr diff3
The
.Xr diff3
command compares three files and outputs descriptions of their differences.
Its arguments are as follows:
.Pp
.Bd -literal -offset indent
diff3 options... mine older yours
.Ed
.Pp
The files to compare are
.Va mine ,
.Va older ,
and
.Va yours .
At most one of these three file names may be
.Pa - ,
which tells
.Xr diff3
to read the standard input for that file.
.Pp
An exit status of 0 means
.Xr diff3
was successful, 1 means some conflicts were found, and 2 means trouble.
.Pp
.Ss  Options to Xr diff3
Below is a summary of all of the options that GNU
.Xr diff3
accepts. Multiple single letter options (unless they take an argument) can
be combined into a single command line argument.
.Pp
.Bl -tag -width Ds
.It  -a
.It  --text
Treat all files as text and compare them line-by-line, even if they do not
appear to be text.See Section
.Dq Binary .
.Pp
.It  -A
.It  --show-all
Incorporate all unmerged changes from
.Va older
to
.Va yours
into
.Va mine ,
surrounding conflicts with bracket lines.See Section
.Dq Marking Conflicts .
.Pp
.It  --diff-program= Va program
Use the compatible comparison program
.Va program
to compare files instead of
.Xr diff .
.Pp
.It  -e
.It  --ed
Generate an
.Xr ed
script that incorporates all the changes from
.Va older
to
.Va yours
into
.Va mine .
See Section.Dq Which Changes .
.Pp
.It  -E
.It  --show-overlap
Like
.Op -e ,
except bracket lines from overlapping changes' first and third files.See Section
.Dq Marking Conflicts .
With
.Op -E ,
an overlapping change looks like this:
.Pp
.Bd -literal -offset indent
<<<<<<< mine
lines from mine
=======
lines from yours
>>>>>>> yours
.Ed
.Pp
.It  --help
Output a summary of usage and then exit.
.Pp
.It  -i
Generate
.Li w
and
.Li q
commands at the end of the
.Xr ed
script for System V compatibility. This option must be combined with one of
the
.Op -AeExX3
options, and may not be combined with
.Op -m .
See Section.Dq Saving the Changed File .
.Pp
.It  --label= Va label
Use the label
.Va label
for the brackets output by the
.Op -A ,
.Op -E
and
.Op -X
options. This option may be given up to three times, one for each input file.
The default labels are the names of the input files. Thus
.Li diff3 --label X --label Y --label Z -m A B C
acts like
.Li diff3 -m A B C ,
except that the output looks like it came from files named
.Li X ,
.Li Y
and
.Li Z
rather than from files named
.Li A ,
.Li B
and
.Li C .
See Section.Dq Marking Conflicts .
.Pp
.It  -m
.It  --merge
Apply the edit script to the first file and send the result to standard output.
Unlike piping the output from
.Xr diff3
to
.Xr ed ,
this works even for binary files and incomplete lines.
.Op -A
is assumed if no edit script option is specified.See Section
.Dq Bypassing ed .
.Pp
.It  --strip-trailing-cr
Strip any trailing carriage return at the end of an input line.See Section
.Dq Binary .
.Pp
.It  -T
.It  --initial-tab
Output a tab rather than two spaces before the text of a line in normal format.
This causes the alignment of tabs in the line to look normal.See Section
.Dq Tabs .
.Pp
.It  -v
.It  --version
Output version information and then exit.
.Pp
.It  -x
.It  --overlap-only
Like
.Op -e ,
except output only the overlapping changes.See Section
.Dq Which Changes .
.Pp
.It  -X
Like
.Op -E ,
except output only the overlapping changes. In other words, like
.Op -x ,
except bracket changes as in
.Op -E .
See Section.Dq Marking Conflicts .
.Pp
.It  -3
.It  --easy-only
Like
.Op -e ,
except output only the nonoverlapping changes.See Section
.Dq Which Changes .
.El
.Pp
.Sh  Invoking Xr patch
Normally
.Xr patch
is invoked like this:
.Pp
.Bd -literal -offset indent
patch <patchfile
.Ed
.Pp
The full format for invoking
.Xr patch
is:
.Pp
.Bd -literal -offset indent
patch options... [origfile [patchfile]]
.Ed
.Pp
You can also specify where to read the patch from with the
.Op -i Va patchfile
or
.Op --input= Va patchfile
option. If you do not specify
.Va patchfile ,
or if
.Va patchfile
is
.Pa - ,
.Xr patch
reads the patch (that is, the
.Xr diff
output) from the standard input.
.Pp
If you do not specify an input file on the command line,
.Xr patch
tries to intuit from the
.Em leading text
(any text in the patch that comes before the
.Xr diff
output) which file to edit.See Section
.Dq Multiple Patches .
.Pp
By default,
.Xr patch
replaces the original input file with the patched version, possibly after
renaming the original file into a backup file (see Section
.Dq Backup Names ,
for a description of how
.Xr patch
names backup files). You can also specify where to put the output with the
.Op -o Va file
or
.Op --output= Va file
option; however, do not use this option if
.Va file
is one of the input files.
.Pp
.Ss  Options to Xr patch
Here is a summary of all of the options that GNU
.Xr patch
accepts.See Section
.Dq patch and Tradition ,
for which of these options are safe to use in older versions of
.Xr patch .
.Pp
Multiple single-letter options that do not take an argument can be combined
into a single command line argument with only one dash.
.Pp
.Bl -tag -width Ds
.It  -b
.It  --backup
Back up the original contents of each file, even if backups would normally
not be made.See Section
.Dq Backups .
.Pp
.It  -B Va prefix
.It  --prefix= Va prefix
Prepend
.Va prefix
to backup file names.See Section
.Dq Backup Names .
.Pp
.It  --backup-if-mismatch
Back up the original contents of each file if the patch does not exactly match
the file. This is the default behavior when not conforming to POSIX.See Section
.Dq Backups .
.Pp
.It  --binary
Read and write all files in binary mode, except for standard output and
.Pa /dev/tty .
This option has no effect on POSIX-conforming systems like GNU/Linux. On systems
where this option makes a difference, the patch should be generated by
.Li diff -a --binary .
See Section.Dq Binary .
.Pp
.It  -c
.It  --context
Interpret the patch file as a context diff.See Section
.Dq patch Input .
.Pp
.It  -d Va directory
.It  --directory= Va directory
Make directory
.Va directory
the current directory for interpreting both file names in the patch file,
and file names given as arguments to other options.See Section
.Dq patch Directories .
.Pp
.It  -D Va name
.It  --ifdef= Va name
Make merged if-then-else output using
.Va name .
See Section.Dq If-then-else .
.Pp
.It  --dry-run
Print the results of applying the patches without actually changing any files.See Section
.Dq Dry Runs .
.Pp
.It  -e
.It  --ed
Interpret the patch file as an
.Xr ed
script.See Section
.Dq patch Input .
.Pp
.It  -E
.It  --remove-empty-files
Remove output files that are empty after the patches have been applied.See Section
.Dq Creating and Removing .
.Pp
.It  -f
.It  --force
Assume that the user knows exactly what he or she is doing, and do not ask
any questions.See Section
.Dq patch Messages .
.Pp
.It  -F Va lines
.It  --fuzz= Va lines
Set the maximum fuzz factor to
.Va lines .
See Section.Dq Inexact .
.Pp
.It  -g Va num
.It  --get= Va num
If
.Va num
is positive, get input files from a revision control system as necessary;
if zero, do not get the files; if negative, ask the user whether to get the
files.See Section
.Dq Revision Control .
.Pp
.It  --help
Output a summary of usage and then exit.
.Pp
.It  -i Va patchfile
.It  --input= Va patchfile
Read the patch from
.Va patchfile
rather than from standard input.See Section
.Dq patch Options .
.Pp
.It  -l
.It  --ignore-white-space
Let any sequence of blanks (spaces or tabs) in the patch file match any sequence
of blanks in the input file.See Section
.Dq Changed White Space .
.Pp
.It  -n
.It  --normal
Interpret the patch file as a normal diff.See Section
.Dq patch Input .
.Pp
.It  -N
.It  --forward
Ignore patches that
.Xr patch
thinks are reversed or already applied. See also
.Op -R .
See Section.Dq Reversed Patches .
.Pp
.It  --no-backup-if-mismatch
Do not back up the original contents of files. This is the default behavior
when conforming to POSIX.See Section
.Dq Backups .
.Pp
.It  -o Va file
.It  --output= Va file
Use
.Va file
as the output file name.See Section
.Dq patch Options .
.Pp
.It  -p Va number
.It  --strip= Va number
Set the file name strip count to
.Va number .
See Section.Dq patch Directories .
.Pp
.It  --posix
Conform to POSIX, as if the
.Ev POSIXLY_CORRECT
environment variable had been set.See Section
.Dq patch and POSIX .
.Pp
.It  --quoting-style= Va word
Use style
.Va word
to quote names in diagnostics, as if the
.Ev QUOTING_STYLE
environment variable had been set to
.Va word .
See Section.Dq patch Quoting Style .
.Pp
.It  -r Va reject-file
.It  --reject-file= Va reject-file
Use
.Va reject-file
as the reject file name.See Section
.Dq Reject Names .
.Pp
.It  -R
.It  --reverse
Assume that this patch was created with the old and new files swapped.See Section
.Dq Reversed Patches .
.Pp
.It  -s
.It  --quiet
.It  --silent
Work silently unless an error occurs.See Section
.Dq patch Messages .
.Pp
.It  -t
.It  --batch
Do not ask any questions.See Section
.Dq patch Messages .
.Pp
.It  -T
.It  --set-time
Set the modification and access times of patched files from time stamps given
in context diff headers, assuming that the context diff headers use local
time.See Section
.Dq Patching Time Stamps .
.Pp
.It  -u
.It  --unified
Interpret the patch file as a unified diff.See Section
.Dq patch Input .
.Pp
.It  -v
.It  --version
Output version information and then exit.
.Pp
.It  -V Va backup-style
.It  --version=control= Va backup-style
Select the naming convention for backup file names.See Section
.Dq Backup Names .
.Pp
.It  --verbose
Print more diagnostics than usual.See Section
.Dq patch Messages .
.Pp
.It  -x Va number
.It  --debug= Va number
Set internal debugging flags. Of interest only to
.Xr patch
patchers.
.Pp
.It  -Y Va prefix
.It  --basename-prefix= Va prefix
Prepend
.Va prefix
to base names of backup files.See Section
.Dq Backup Names .
.Pp
.It  -z Va suffix
.It  --suffix= Va suffix
Use
.Va suffix
as the backup extension instead of
.Li .orig
or
.Li ~ .
See Section.Dq Backup Names .
.Pp
.It  -Z
.It  --set-utc
Set the modification and access times of patched files from time stamps given
in context diff headers, assuming that the context diff headers use UTC.See Section
.Dq Patching Time Stamps .
.Pp
.El
.Sh  Invoking Xr sdiff
The
.Xr sdiff
command merges two files and interactively outputs the results. Its arguments
are as follows:
.Pp
.Bd -literal -offset indent
sdiff -o outfile options... from-file to-file
.Ed
.Pp
This merges
.Va from-file
with
.Va to-file ,
with output to
.Va outfile .
If
.Va from-file
is a directory and
.Va to-file
is not,
.Xr sdiff
compares the file in
.Va from-file
whose file name is that of
.Va to-file ,
and vice versa.
.Va from-file
and
.Va to-file
may not both be directories.
.Pp
.Xr sdiff
options begin with
.Li - ,
so normally
.Va from-file
and
.Va to-file
may not begin with
.Li - .
However,
.Op --
as an argument by itself treats the remaining arguments as file names even
if they begin with
.Li - .
You may not use
.Pa -
as an input file.
.Pp
.Xr sdiff
without
.Op -o
(or
.Op --output )
produces a side-by-side difference. This usage is obsolete; use the
.Op -y
or
.Op --side-by-side
option of
.Xr diff
instead.
.Pp
An exit status of 0 means no differences were found, 1 means some differences
were found, and 2 means trouble.
.Pp
.Ss  Options to Xr sdiff
Below is a summary of all of the options that GNU
.Xr sdiff
accepts. Each option has two equivalent names, one of which is a single letter
preceded by
.Li - ,
and the other of which is a long name preceded by
.Li -- .
Multiple single letter options (unless they take an argument) can be combined
into a single command line argument. Long named options can be abbreviated
to any unique prefix of their name.
.Pp
.Bl -tag -width Ds
.It  -a
.It  --text
Treat all files as text and compare them line-by-line, even if they do not
appear to be text.See Section
.Dq Binary .
.Pp
.It  -b
.It  --ignore-space-change
Ignore changes in amount of white space.See Section
.Dq White Space .
.Pp
.It  -B
.It  --ignore-blank-lines
Ignore changes that just insert or delete blank lines.See Section
.Dq Blank Lines .
.Pp
.It  -d
.It  --minimal
Change the algorithm to perhaps find a smaller set of changes. This makes
.Xr sdiff
slower (sometimes much slower).See Section
.Dq diff Performance .
.Pp
.It  --diff-program= Va program
Use the compatible comparison program
.Va program
to compare files instead of
.Xr diff .
.Pp
.It  -E
.It  --ignore-tab-expansion
Ignore changes due to tab expansion.See Section
.Dq White Space .
.Pp
.It  --help
Output a summary of usage and then exit.
.Pp
.It  -i
.It  --ignore-case
Ignore changes in case; consider upper- and lower-case to be the same.See Section
.Dq Case Folding .
.Pp
.It  -I Va regexp
.It  --ignore-matching-lines= Va regexp
Ignore changes that just insert or delete lines that match
.Va regexp .
See Section.Dq Specified Lines .
.Pp
.It  -l
.It  --left-column
Print only the left column of two common lines.See Section
.Dq Side by Side Format .
.Pp
.It  -o Va file
.It  --output= Va file
Put merged output into
.Va file .
This option is required for merging.
.Pp
.It  -s
.It  --suppress-common-lines
Do not print common lines.See Section
.Dq Side by Side Format .
.Pp
.It  --speed-large-files
Use heuristics to speed handling of large files that have numerous scattered
small changes.See Section
.Dq diff Performance .
.Pp
.It  --strip-trailing-cr
Strip any trailing carriage return at the end of an input line.See Section
.Dq Binary .
.Pp
.It  -t
.It  --expand-tabs
Expand tabs to spaces in the output, to preserve the alignment of tabs in
the input files.See Section
.Dq Tabs .
.Pp
.It  --tabsize= Va columns
Assume that tab stops are set every
.Va columns
(default 8) print columns.See Section
.Dq Tabs .
.Pp
.It  -v
.It  --version
Output version information and then exit.
.Pp
.It  -w Va columns
.It  --width= Va columns
Output at most
.Va columns
(default 130) print columns per line.See Section
.Dq Side by Side Format .
Note that for historical reasons, this option is
.Op -W
in
.Xr diff ,
.Op -w
in
.Xr sdiff .
.Pp
.It  -W
.It  --ignore-all-space
Ignore white space when comparing lines.See Section
.Dq White Space .
Note that for historical reasons, this option is
.Op -w
in
.Xr diff ,
.Op -W
in
.Xr sdiff .
.El
.Pp
.Sh  Standards conformance
In a few cases, the GNU utilities' default behavior is incompatible with the
POSIX standard. To suppress these incompatibilities, define the
.Ev POSIXLY_CORRECT
environment variable. Unless you are checking for POSIX conformance, you probably
do not need to define
.Ev POSIXLY_CORRECT .
.Pp
Normally options and operands can appear in any order, and programs act as
if all the options appear before any operands. For example,
.Li diff lao tzu -C 2
acts like
.Li diff -C 2 lao tzu ,
since
.Li 2
is an option-argument of
.Op -C .
However, if the
.Ev POSIXLY_CORRECT
environment variable is set, options must appear before operands, unless otherwise
specified for a particular command.
.Pp
Newer versions of POSIX are occasionally incompatible with older versions.
For example, older versions of POSIX allowed the command
.Li diff -c -10
to have the same meaning as
.Li diff -C 10 ,
but POSIX 1003.1-2001
.Li diff
no longer allows digit-string options like
.Op -10 .
.Pp
The GNU utilities normally conform to the version of POSIX that is standard
for your system. To cause them to conform to a different version of POSIX,
define the
.Ev _POSIX2_VERSION
environment variable to a value of the form
.Va yyyymm
specifying the year and month the standard was adopted. Two values are currently
supported for
.Ev _POSIX2_VERSION :
.Li 199209
stands for POSIX 1003.2-1992, and
.Li 200112
stands for POSIX 1003.1-2001. For example, if you are running older software
that assumes an older version of POSIX and uses
.Li diff -c -10 ,
you can work around the compatibility problems by setting
.Li _POSIX2_VERSION=199209
in your environment.
.Pp
.Sh  Future Projects
Here are some ideas for improving GNU
.Xr diff
and
.Xr patch .
The GNU project has identified some improvements as potential programming
projects for volunteers. You can also help by reporting any bugs that you
find.
.Pp
If you are a programmer and would like to contribute something to the GNU
project, please consider volunteering for one of these projects. If you are
seriously contemplating work, please write to
.Mt gvc@gnu.org
to coordinate with other volunteers.
.Pp
.Ss  Suggested Projects for Improving GNU Xr diff and Xr patch
One should be able to use GNU
.Xr diff
to generate a patch from any pair of directory trees, and given the patch
and a copy of one such tree, use
.Xr patch
to generate a faithful copy of the other. Unfortunately, some changes to directory
trees cannot be expressed using current patch formats; also,
.Xr patch
does not handle some of the existing formats. These shortcomings motivate
the following suggested projects.
.Pp
.Em  Handling Multibyte and Varying-Width Characters
.Pp
.Xr diff ,
.Xr diff3
and
.Xr sdiff
treat each line of input as a string of unibyte characters. This can mishandle
multibyte characters in some cases. For example, when asked to ignore spaces,
.Xr diff
does not properly ignore a multibyte space character.
.Pp
Also,
.Xr diff
currently assumes that each byte is one column wide, and this assumption is
incorrect in some locales, e.g., locales that use UTF-8 encoding. This causes
problems with the
.Op -y
or
.Op --side-by-side
option of
.Xr diff .
.Pp
These problems need to be fixed without unduly affecting the performance of
the utilities in unibyte environments.
.Pp
The IBM GNU/Linux Technology Center Internationalization Team has proposed
.Lk http://oss.software.ibm.com/developer/opensource/linux/patches/i18n/diffutils-2.7.2-i18n-0.1.patch.gz .
Unfortunately, these patches are incomplete and are to an older version of
.Xr diff ,
so more work needs to be done in this area.
.Pp
.Em  Handling Changes to the Directory Structure
.Pp
.Xr diff
and
.Xr patch
do not handle some changes to directory structure. For example, suppose one
directory tree contains a directory named
.Li D
with some subsidiary files, and another contains a file with the same name
.Li D .
.Li diff -r
does not output enough information for
.Xr patch
to transform the directory subtree into the file.
.Pp
There should be a way to specify that a file has been removed without having
to include its entire contents in the patch file. There should also be a way
to tell
.Xr patch
that a file was renamed, even if there is no way for
.Xr diff
to generate such information. There should be a way to tell
.Xr patch
that a file's time stamp has changed, even if its contents have not changed.
.Pp
These problems can be fixed by extending the
.Xr diff
output format to represent changes in directory structure, and extending
.Xr patch
to understand these extensions.
.Pp
.Em  Files that are Neither Directories Nor Regular Files
.Pp
Some files are neither directories nor regular files: they are unusual files
like symbolic links, device special files, named pipes, and sockets. Currently,
.Xr diff
treats symbolic links as if they were the pointed-to files, except that a
recursive
.Xr diff
reports an error if it detects infinite loops of symbolic links (e.g., symbolic
links to
.Pa .. ) .
.Xr diff
treats other special files like regular files if they are specified at the
top level, but simply reports their presence when comparing directories. This
means that
.Xr patch
cannot represent changes to such files. For example, if you change which file
a symbolic link points to,
.Xr diff
outputs the difference between the two files, instead of the change to the
symbolic link.
.Pp
.Xr diff
should optionally report changes to special files specially, and
.Xr patch
should be extended to understand these extensions.
.Pp
.Em  File Names that Contain Unusual Characters
.Pp
When a file name contains an unusual character like a newline or white space,
.Li diff -r
generates a patch that
.Xr patch
cannot parse. The problem is with format of
.Xr diff
output, not just with
.Xr patch ,
because with odd enough file names one can cause
.Xr diff
to generate a patch that is syntactically correct but patches the wrong files.
The format of
.Xr diff
output should be extended to handle all possible file names.
.Pp
.Em  Outputting Diffs in Time Stamp Order
.Pp
Applying
.Xr patch
to a multiple-file diff can result in files whose time stamps are out of order.
GNU
.Xr patch
has options to restore the time stamps of the updated files (see Section
.Dq Patching Time Stamps ) ,
but sometimes it is useful to generate a patch that works even if the recipient
does not have GNU patch, or does not use these options. One way to do this
would be to implement a
.Xr diff
option to output diffs in time stamp order.
.Pp
.Em  Ignoring Certain Changes
.Pp
It would be nice to have a feature for specifying two strings, one in
.Va from-file
and one in
.Va to-file ,
which should be considered to match. Thus, if the two strings are
.Li foo
and
.Li bar ,
then if two lines differ only in that
.Li foo
in file 1 corresponds to
.Li bar
in file 2, the lines are treated as identical.
.Pp
It is not clear how general this feature can or should be, or what syntax
should be used for it.
.Pp
A partial substitute is to filter one or both files before comparing, e.g.:
.Pp
.Bd -literal -offset indent
sed 's/foo/bar/g' file1 | diff - file2
.Ed
.Pp
However, this outputs the filtered text, not the original.
.Pp
.Em  Improving Performance
.Pp
When comparing two large directory structures, one of which was originally
copied from the other with time stamps preserved (e.g., with
.Li cp -pR ) ,
it would greatly improve performance if an option told
.Xr diff
to assume that two files with the same size and time stamps have the same
content.See Section
.Dq diff Performance .
.Pp
.Ss  Reporting Bugs
If you think you have found a bug in GNU
.Xr cmp ,
.Xr diff ,
.Xr diff3 ,
or
.Xr sdiff ,
please report it by electronic mail to the
.Lk http://mail.gnu.org/mailman/listinfo/bug-gnu-utils
.Mt bug-gnu-utils@gnu.org .
Please send bug reports for GNU
.Xr patch
to
.Mt bug-patch@gnu.org .
Send as precise a description of the problem as you can, including the output
of the
.Op --version
option and sample input files that produce the bug, if applicable. If you
have a nontrivial fix for the bug, please send it as well. If you have a patch,
please send it too. It may simplify the maintainer's job if the patch is relative
to a recent test release, which you can find in the directory
.Lk ftp://alpha.gnu.org/gnu/diffutils/ .
.Pp
.Sh  Copying This Manual
.Ss  GNU Free Documentation License
.Bd -filled -offset indent
Copyright \(co 2000,2001,2002 Free Software Foundation, Inc. 59 Temple Place,
Suite 330, Boston, MA 02111-1307, USA
.Pp
Everyone is permitted to copy and distribute verbatim copies of this license
document, but changing it is not allowed.
.Ed
.Pp
.Bl -enum
.It
PREAMBLE
.Pp
The purpose of this License is to make a manual, textbook, or other functional
and useful document
.Em free
in the sense of freedom: to assure everyone the effective freedom to copy
and redistribute it, with or without modifying it, either commercially or
noncommercially. Secondarily, this License preserves for the author and publisher
a way to get credit for their work, while not being considered responsible
for modifications made by others.
.Pp
This License is a kind of \(lqcopyleft\(rq, which means that derivative works of the
document must themselves be free in the same sense. It complements the GNU
General Public License, which is a copyleft license designed for free software.
.Pp
We have designed this License in order to use it for manuals for free software,
because free software needs free documentation: a free program should come
with manuals providing the same freedoms that the software does. But this
License is not limited to software manuals; it can be used for any textual
work, regardless of subject matter or whether it is published as a printed
book. We recommend this License principally for works whose purpose is instruction
or reference.
.Pp
.It
APPLICABILITY AND DEFINITIONS
.Pp
This License applies to any manual or other work, in any medium, that contains
a notice placed by the copyright holder saying it can be distributed under
the terms of this License. Such a notice grants a world-wide, royalty-free
license, unlimited in duration, to use that work under the conditions stated
herein. The \(lqDocument\(rq, below, refers to any such manual or work. Any member
of the public is a licensee, and is addressed as \(lqyou\(rq. You accept the license
if you copy, modify or distribute the work in a way requiring permission under
copyright law.
.Pp
A \(lqModified Version\(rq of the Document means any work containing the Document
or a portion of it, either copied verbatim, or with modifications and/or translated
into another language.
.Pp
A \(lqSecondary Section\(rq is a named appendix or a front-matter section of the Document
that deals exclusively with the relationship of the publishers or authors
of the Document to the Document's overall subject (or to related matters)
and contains nothing that could fall directly within that overall subject.
(Thus, if the Document is in part a textbook of mathematics, a Secondary Section
may not explain any mathematics.) The relationship could be a matter of historical
connection with the subject or with related matters, or of legal, commercial,
philosophical, ethical or political position regarding them.
.Pp
The \(lqInvariant Sections\(rq are certain Secondary Sections whose titles are designated,
as being those of Invariant Sections, in the notice that says that the Document
is released under this License. If a section does not fit the above definition
of Secondary then it is not allowed to be designated as Invariant. The Document
may contain zero Invariant Sections. If the Document does not identify any
Invariant Sections then there are none.
.Pp
The \(lqCover Texts\(rq are certain short passages of text that are listed, as Front-Cover
Texts or Back-Cover Texts, in the notice that says that the Document is released
under this License. A Front-Cover Text may be at most 5 words, and a Back-Cover
Text may be at most 25 words.
.Pp
A \(lqTransparent\(rq copy of the Document means a machine-readable copy, represented
in a format whose specification is available to the general public, that is
suitable for revising the document straightforwardly with generic text editors
or (for images composed of pixels) generic paint programs or (for drawings)
some widely available drawing editor, and that is suitable for input to text
formatters or for automatic translation to a variety of formats suitable for
input to text formatters. A copy made in an otherwise Transparent file format
whose markup, or absence of markup, has been arranged to thwart or discourage
subsequent modification by readers is not Transparent. An image format is
not Transparent if used for any substantial amount of text. A copy that is
not \(lqTransparent\(rq is called \(lqOpaque\(rq.
.Pp
Examples of suitable formats for Transparent copies include plain ascii without
markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly
available DTD, and standard-conforming simple HTML, PostScript or PDF designed
for human modification. Examples of transparent image formats include PNG,
XCF and JPG. Opaque formats include proprietary formats that can be read and
edited only by proprietary word processors, SGML or XML for which the DTD
and/or processing tools are not generally available, and the machine-generated
HTML, PostScript or PDF produced by some word processors for output purposes
only.
.Pp
The \(lqTitle Page\(rq means, for a printed book, the title page itself, plus such
following pages as are needed to hold, legibly, the material this License
requires to appear in the title page. For works in formats which do not have
any title page as such, \(lqTitle Page\(rq means the text near the most prominent
appearance of the work's title, preceding the beginning of the body of the
text.
.Pp
A section \(lqEntitled XYZ\(rq means a named subunit of the Document whose title either
is precisely XYZ or contains XYZ in parentheses following text that translates
XYZ in another language. (Here XYZ stands for a specific section name mentioned
below, such as \(lqAcknowledgements\(rq, \(lqDedications\(rq, \(lqEndorsements\(rq, or \(lqHistory\(rq.) To
\(lqPreserve the Title\(rq of such a section when you modify the Document means that
it remains a section \(lqEntitled XYZ\(rq according to this definition.
.Pp
The Document may include Warranty Disclaimers next to the notice which states
that this License applies to the Document. These Warranty Disclaimers are
considered to be included by reference in this License, but only as regards
disclaiming warranties: any other implication that these Warranty Disclaimers
may have is void and has no effect on the meaning of this License.
.Pp
.It
VERBATIM COPYING
.Pp
You may copy and distribute the Document in any medium, either commercially
or noncommercially, provided that this License, the copyright notices, and
the license notice saying this License applies to the Document are reproduced
in all copies, and that you add no other conditions whatsoever to those of
this License. You may not use technical measures to obstruct or control the
reading or further copying of the copies you make or distribute. However,
you may accept compensation in exchange for copies. If you distribute a large
enough number of copies you must also follow the conditions in section 3.
.Pp
You may also lend copies, under the same conditions stated above, and you
may publicly display copies.
.Pp
.It
COPYING IN QUANTITY
.Pp
If you publish printed copies (or copies in media that commonly have printed
covers) of the Document, numbering more than 100, and the Document's license
notice requires Cover Texts, you must enclose the copies in covers that carry,
clearly and legibly, all these Cover Texts: Front-Cover Texts on the front
cover, and Back-Cover Texts on the back cover. Both covers must also clearly
and legibly identify you as the publisher of these copies. The front cover
must present the full title with all words of the title equally prominent
and visible. You may add other material on the covers in addition. Copying
with changes limited to the covers, as long as they preserve the title of
the Document and satisfy these conditions, can be treated as verbatim copying
in other respects.
.Pp
If the required texts for either cover are too voluminous to fit legibly,
you should put the first ones listed (as many as fit reasonably) on the actual
cover, and continue the rest onto adjacent pages.
.Pp
If you publish or distribute Opaque copies of the Document numbering more
than 100, you must either include a machine-readable Transparent copy along
with each Opaque copy, or state in or with each Opaque copy a computer-network
location from which the general network-using public has access to download
using public-standard network protocols a complete Transparent copy of the
Document, free of added material. If you use the latter option, you must take
reasonably prudent steps, when you begin distribution of Opaque copies in
quantity, to ensure that this Transparent copy will remain thus accessible
at the stated location until at least one year after the last time you distribute
an Opaque copy (directly or through your agents or retailers) of that edition
to the public.
.Pp
It is requested, but not required, that you contact the authors of the Document
well before redistributing any large number of copies, to give them a chance
to provide you with an updated version of the Document.
.Pp
.It
MODIFICATIONS
.Pp
You may copy and distribute a Modified Version of the Document under the conditions
of sections 2 and 3 above, provided that you release the Modified Version
under precisely this License, with the Modified Version filling the role of
the Document, thus licensing distribution and modification of the Modified
Version to whoever possesses a copy of it. In addition, you must do these
things in the Modified Version:
.Pp
.Bl -enum
.It
Use in the Title Page (and on the covers, if any) a title distinct from that
of the Document, and from those of previous versions (which should, if there
were any, be listed in the History section of the Document). You may use the
same title as a previous version if the original publisher of that version
gives permission.
.Pp
.It
List on the Title Page, as authors, one or more persons or entities responsible
for authorship of the modifications in the Modified Version, together with
at least five of the principal authors of the Document (all of its principal
authors, if it has fewer than five), unless they release you from this requirement.
.Pp
.It
State on the Title page the name of the publisher of the Modified Version,
as the publisher.
.Pp
.It
Preserve all the copyright notices of the Document.
.Pp
.It
Add an appropriate copyright notice for your modifications adjacent to the
other copyright notices.
.Pp
.It
Include, immediately after the copyright notices, a license notice giving
the public permission to use the Modified Version under the terms of this
License, in the form shown in the Addendum below.
.Pp
.It
Preserve in that license notice the full lists of Invariant Sections and required
Cover Texts given in the Document's license notice.
.Pp
.It
Include an unaltered copy of this License.
.Pp
.It
Preserve the section Entitled \(lqHistory\(rq, Preserve its Title, and add to it an
item stating at least the title, year, new authors, and publisher of the Modified
Version as given on the Title Page. If there is no section Entitled \(lqHistory\(rq
in the Document, create one stating the title, year, authors, and publisher
of the Document as given on its Title Page, then add an item describing the
Modified Version as stated in the previous sentence.
.Pp
.It
Preserve the network location, if any, given in the Document for public access
to a Transparent copy of the Document, and likewise the network locations
given in the Document for previous versions it was based on. These may be
placed in the \(lqHistory\(rq section. You may omit a network location for a work
that was published at least four years before the Document itself, or if the
original publisher of the version it refers to gives permission.
.Pp
.It
For any section Entitled \(lqAcknowledgements\(rq or \(lqDedications\(rq, Preserve the Title
of the section, and preserve in the section all the substance and tone of
each of the contributor acknowledgements and/or dedications given therein.
.Pp
.It
Preserve all the Invariant Sections of the Document, unaltered in their text
and in their titles. Section numbers or the equivalent are not considered
part of the section titles.
.Pp
.It
Delete any section Entitled \(lqEndorsements\(rq. Such a section may not be included
in the Modified Version.
.Pp
.It
Do not retitle any existing section to be Entitled \(lqEndorsements\(rq or to conflict
in title with any Invariant Section.
.Pp
.It
Preserve any Warranty Disclaimers.
.El
.Pp
If the Modified Version includes new front-matter sections or appendices that
qualify as Secondary Sections and contain no material copied from the Document,
you may at your option designate some or all of these sections as invariant.
To do this, add their titles to the list of Invariant Sections in the Modified
Version's license notice. These titles must be distinct from any other section
titles.
.Pp
You may add a section Entitled \(lqEndorsements\(rq, provided it contains nothing
but endorsements of your Modified Version by various parties---for example,
statements of peer review or that the text has been approved by an organization
as the authoritative definition of a standard.
.Pp
You may add a passage of up to five words as a Front-Cover Text, and a passage
of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts
in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover
Text may be added by (or through arrangements made by) any one entity. If
the Document already includes a cover text for the same cover, previously
added by you or by arrangement made by the same entity you are acting on behalf
of, you may not add another; but you may replace the old one, on explicit
permission from the previous publisher that added the old one.
.Pp
The author(s) and publisher(s) of the Document do not by this License give
permission to use their names for publicity for or to assert or imply endorsement
of any Modified Version.
.Pp
.It
COMBINING DOCUMENTS
.Pp
You may combine the Document with other documents released under this License,
under the terms defined in section 4 above for modified versions, provided
that you include in the combination all of the Invariant Sections of all of
the original documents, unmodified, and list them all as Invariant Sections
of your combined work in its license notice, and that you preserve all their
Warranty Disclaimers.
.Pp
The combined work need only contain one copy of this License, and multiple
identical Invariant Sections may be replaced with a single copy. If there
are multiple Invariant Sections with the same name but different contents,
make the title of each such section unique by adding at the end of it, in
parentheses, the name of the original author or publisher of that section
if known, or else a unique number. Make the same adjustment to the section
titles in the list of Invariant Sections in the license notice of the combined
work.
.Pp
In the combination, you must combine any sections Entitled \(lqHistory\(rq in the
various original documents, forming one section Entitled \(lqHistory\(rq; likewise
combine any sections Entitled \(lqAcknowledgements\(rq, and any sections Entitled
\(lqDedications\(rq. You must delete all sections Entitled \(lqEndorsements.\(rq
.Pp
.It
COLLECTIONS OF DOCUMENTS
.Pp
You may make a collection consisting of the Document and other documents released
under this License, and replace the individual copies of this License in the
various documents with a single copy that is included in the collection, provided
that you follow the rules of this License for verbatim copying of each of
the documents in all other respects.
.Pp
You may extract a single document from such a collection, and distribute it
individually under this License, provided you insert a copy of this License
into the extracted document, and follow this License in all other respects
regarding verbatim copying of that document.
.Pp
.It
AGGREGATION WITH INDEPENDENT WORKS
.Pp
A compilation of the Document or its derivatives with other separate and independent
documents or works, in or on a volume of a storage or distribution medium,
is called an \(lqaggregate\(rq if the copyright resulting from the compilation is
not used to limit the legal rights of the compilation's users beyond what
the individual works permit. When the Document is included in an aggregate,
this License does not apply to the other works in the aggregate which are
not themselves derivative works of the Document.
.Pp
If the Cover Text requirement of section 3 is applicable to these copies of
the Document, then if the Document is less than one half of the entire aggregate,
the Document's Cover Texts may be placed on covers that bracket the Document
within the aggregate, or the electronic equivalent of covers if the Document
is in electronic form. Otherwise they must appear on printed covers that bracket
the whole aggregate.
.Pp
.It
TRANSLATION
.Pp
Translation is considered a kind of modification, so you may distribute translations
of the Document under the terms of section 4. Replacing Invariant Sections
with translations requires special permission from their copyright holders,
but you may include translations of some or all Invariant Sections in addition
to the original versions of these Invariant Sections. You may include a translation
of this License, and all the license notices in the Document, and any Warranty
Disclaimers, provided that you also include the original English version of
this License and the original versions of those notices and disclaimers. In
case of a disagreement between the translation and the original version of
this License or a notice or disclaimer, the original version will prevail.
.Pp
If a section in the Document is Entitled \(lqAcknowledgements\(rq, \(lqDedications\(rq, or
\(lqHistory\(rq, the requirement (section 4) to Preserve its Title (section 1) will
typically require changing the actual title.
.Pp
.It
TERMINATION
.Pp
You may not copy, modify, sublicense, or distribute the Document except as
expressly provided for under this License. Any other attempt to copy, modify,
sublicense or distribute the Document is void, and will automatically terminate
your rights under this License. However, parties who have received copies,
or rights, from you under this License will not have their licenses terminated
so long as such parties remain in full compliance.
.Pp
.It
FUTURE REVISIONS OF THIS LICENSE
.Pp
The Free Software Foundation may publish new, revised versions of the GNU
Free Documentation License from time to time. Such new versions will be similar
in spirit to the present version, but may differ in detail to address new
problems or concerns. See
.Lk http://www.gnu.org/copyleft/ .
.Pp
Each version of the License is given a distinguishing version number. If the
Document specifies that a particular numbered version of this License \(lqor any
later version\(rq applies to it, you have the option of following the terms and
conditions either of that specified version or of any later version that has
been published (not as a draft) by the Free Software Foundation. If the Document
does not specify a version number of this License, you may choose any version
ever published (not as a draft) by the Free Software Foundation.
.El
.Pp
.Em  ADDENDUM: How to use this License for your documents
.Pp
To use this License in a document you have written, include a copy of the
License in the document and put the following copyright and license notices
just after the title page:
.Pp
.Bd -literal -offset indent

  Copyright (C)  year  your name.
  Permission is granted to copy, distribute and/or modify this document
  under the terms of the GNU Free Documentation License, Version 1.2
  or any later version published by the Free Software Foundation;
  with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
  Texts.  A copy of the license is included in the section entitled \(lqGNU
  Free Documentation License\(rq.

.Ed
.Pp
If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, replace
the \(lqwith...Texts.\(rq line with this:
.Pp
.Bd -literal -offset indent

    with the Invariant Sections being list their titles, with
    the Front-Cover Texts being list, and with the Back-Cover Texts
    being list.

.Ed
.Pp
If you have Invariant Sections without Cover Texts, or some other combination
of the three, merge those two alternatives to suit the situation.
.Pp
If your document contains nontrivial examples of program code, we recommend
releasing these examples in parallel under your choice of free software license,
such as the GNU General Public License, to permit their use in free software.
.Pp
.Sh  Translations of This Manual
Nishio Futoshi of the GNUjdoc project has prepared a Japanese translation
of this manual. Its most recent version can be found at
.Lk http://openlab.ring.gr.jp/gnujdoc/cvsweb/cvsweb.cgi/gnujdoc/ .
.Pp
.Sh  Index