freebsd-nq/sys/dev/usb/wlan/if_runvar.h

/*	$OpenBSD: if_runvar.h,v 1.3 2009/03/26 20:17:27 damien Exp $	*/

/*-
 * Copyright (c) 2008,2009 Damien Bergamini <damien.bergamini@free.fr>
 * ported to FreeBSD by Akinori Furukoshi <moonlightakkiy@yahoo.ca>
 * USB Consulting, Hans Petter Selasky <hselasky@freebsd.org>
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 * $FreeBSD$
 */

#ifndef _IF_RUNVAR_H_
#define	_IF_RUNVAR_H_

#define RUN_MAX_RXSZ			\
	MIN(4096, MJUMPAGESIZE)
#if 0
	(sizeof (uint32_t) +		\
	 sizeof (struct rt2860_rxwi) +	\
	 sizeof (uint16_t) +		\
	 MCLBYTES +			\
	 sizeof (struct rt2870_rxd))
#endif
/* NB: "11" is the maximum number of padding bytes needed for Tx */
#define RUN_MAX_TXSZ			\
	(sizeof (struct rt2870_txd) +	\
	 sizeof (struct rt2860_rxwi) +	\
	 MCLBYTES + 11)

#define RUN_TX_TIMEOUT	5000	/* ms */

/* Tx ring count was 8/endpoint, now 32 for all 4 (or 6) endpoints. */
#define RUN_TX_RING_COUNT	32
#define RUN_RX_RING_COUNT	1

#define RT2870_WCID_MAX		253
#define RUN_AID2WCID(aid)	((aid) & 0xff)

struct run_rx_radiotap_header {
	struct ieee80211_radiotap_header wr_ihdr;
	uint8_t		wr_flags;
	uint8_t		wr_rate;
	uint16_t	wr_chan_freq;
	uint16_t	wr_chan_flags;
	uint8_t		wr_dbm_antsignal;
	uint8_t		wr_antenna;
	uint8_t		wr_antsignal;
} __packed;

#define RUN_RX_RADIOTAP_PRESENT				\
	(1 << IEEE80211_RADIOTAP_FLAGS |		\
	 1 << IEEE80211_RADIOTAP_RATE |			\
	 1 << IEEE80211_RADIOTAP_CHANNEL |		\
	 1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL |	\
	 1 << IEEE80211_RADIOTAP_ANTENNA |		\
	 1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL)

struct run_tx_radiotap_header {
	struct ieee80211_radiotap_header wt_ihdr;
	uint8_t		wt_flags;
	uint8_t		wt_rate;
	uint16_t	wt_chan_freq;
	uint16_t	wt_chan_flags;
	uint8_t		wt_hwqueue;
} __packed;

#define IEEE80211_RADIOTAP_HWQUEUE 15

#define RUN_TX_RADIOTAP_PRESENT				\
	(1 << IEEE80211_RADIOTAP_FLAGS |		\
	 1 << IEEE80211_RADIOTAP_RATE |			\
	 1 << IEEE80211_RADIOTAP_CHANNEL |		\
	 1 << IEEE80211_RADIOTAP_HWQUEUE)

struct run_softc;

struct run_tx_data {
	STAILQ_ENTRY(run_tx_data)	next;
	struct run_softc	*sc;
	struct mbuf		*m;
	struct ieee80211_node	*ni;
	uint32_t align[0];	/* dummy field */
	uint8_t	desc[sizeof(struct rt2870_txd) +
		     sizeof(struct rt2860_txwi)];
	int			ridx;
	uint8_t			mcs;
};
STAILQ_HEAD(run_tx_data_head, run_tx_data);

struct run_node {
	struct ieee80211_node	ni;
	uint8_t			ridx[IEEE80211_RATE_MAXSIZE];
	uint8_t			ctl_ridx[IEEE80211_RATE_MAXSIZE];
};

struct run_vap {
	struct ieee80211vap             vap;
	struct ieee80211_beacon_offsets bo;
	struct usb_callout              ratectl_ch;
	struct task                     ratectl_task;
	uint8_t				ratectl_run;
#define RUN_RATECTL_ON	1
#define RUN_RATECTL_OFF	0

	int                             (*newstate)(struct ieee80211vap *,
                                            enum ieee80211_state, int);
};
#define RUN_VAP(vap)    ((struct run_vap *)(vap))

/*
 * There are 7 bulk endpoints: 1 for RX
 * and 6 for TX (4 EDCAs + HCCA + Prio).
 * Update 03-14-2009:  some devices like the Planex GW-US300MiniS
 * seem to have only 4 TX bulk endpoints (Fukaumi Naoki).
 */
enum {
	RUN_BULK_TX_BE,		/* = WME_AC_BE */
	RUN_BULK_TX_BK,		/* = WME_AC_BK */
	RUN_BULK_TX_VI,		/* = WME_AC_VI */
	RUN_BULK_TX_VO,		/* = WME_AC_VO */
	RUN_BULK_TX_HCCA,
	RUN_BULK_TX_PRIO,
	RUN_BULK_RX,
	RUN_N_XFER,
};

#define	RUN_EP_QUEUES	RUN_BULK_RX

struct run_endpoint_queue {
	struct run_tx_data		tx_data[RUN_TX_RING_COUNT];
	struct run_tx_data_head		tx_qh;
	struct run_tx_data_head		tx_fh;
	uint32_t			tx_nfree;
};

struct run_softc {
	device_t			sc_dev;
	struct usb_device		*sc_udev;
	struct ifnet			*sc_ifp;
	struct run_vap			*sc_rvp;

	int				(*sc_srom_read)(struct run_softc *,
					    uint16_t, uint16_t *);

	uint16_t			mac_ver;
	uint16_t			mac_rev;
	uint8_t				rf_rev;
	uint8_t				freq;
	uint8_t				ntxchains;
	uint8_t				nrxchains;
	int				fixed_ridx;

	uint8_t				bbp25;
	uint8_t				bbp26;
	uint8_t				rf24_20mhz;
	uint8_t				rf24_40mhz;
	uint8_t				patch_dac;
	uint8_t				rfswitch;
	uint8_t				ext_2ghz_lna;
	uint8_t				ext_5ghz_lna;
	uint8_t				calib_2ghz;
	uint8_t				calib_5ghz;
	uint8_t				txmixgain_2ghz;
	uint8_t				txmixgain_5ghz;
	int8_t				txpow1[54];
	int8_t				txpow2[54];
	int8_t				rssi_2ghz[3];
	int8_t				rssi_5ghz[3];
	uint8_t				lna[4];

	struct {
		uint8_t	reg;
		uint8_t	val;
	}				bbp[8], rf[10];
	uint8_t				leds;
	uint16_t			led[3];
	uint32_t			txpow20mhz[5];
	uint32_t			txpow40mhz_2ghz[5];
	uint32_t			txpow40mhz_5ghz[5];

	uint8_t				sc_bssid[6];

	struct mtx			sc_mtx;

	struct run_endpoint_queue	sc_epq[RUN_EP_QUEUES];

	struct task			wme_task;
	struct task			usb_timeout_task;

	struct usb_xfer			*sc_xfer[RUN_N_XFER];

	struct mbuf			*rx_m;

	union {
		struct run_rx_radiotap_header th;
		uint8_t	pad[64];
	}				sc_rxtapu;
#define sc_rxtap	sc_rxtapu.th
	int				sc_rxtap_len;

	union {
		struct run_tx_radiotap_header th;
		uint8_t	pad[64];
	}				sc_txtapu;
#define sc_txtap	sc_txtapu.th
	int				sc_txtap_len;
};

#define RUN_LOCK(sc)		mtx_lock(&(sc)->sc_mtx)
#define RUN_UNLOCK(sc)		mtx_unlock(&(sc)->sc_mtx)
#define RUN_LOCK_ASSERT(sc, t)	mtx_assert(&(sc)->sc_mtx, t)

#endif	/* _IF_RUNVAR_H_ */