freebsd-nq/sys/dev/usb/umodem.c
Shunsuke Akiyama 86aa13bdbf Fix duplicate sc_dying usage.
All drivers which depend on ucom interfaces should use only one
sc_dying.
2003-03-09 11:19:18 +00:00

792 lines
21 KiB
C

/* $NetBSD: umodem.c,v 1.45 2002/09/23 05:51:23 simonb Exp $ */
/* $FreeBSD$ */
/*-
* Copyright (c) 2003, M. Warner Losh <imp@freebsd.org>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (lennart@augustsson.net) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Comm Class spec: http://www.usb.org/developers/data/devclass/usbcdc10.pdf
* http://www.usb.org/developers/data/devclass/usbcdc11.pdf
*/
/*
* TODO:
* - Add error recovery in various places; the big problem is what
* to do in a callback if there is an error.
* - Implement a Call Device for modems without multiplexed commands.
*
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/ioccom.h>
#include <sys/conf.h>
#include <sys/tty.h>
#include <sys/file.h>
#include <sys/select.h>
#include <sys/sysctl.h>
#include <sys/proc.h>
#include <sys/vnode.h>
#include <sys/bus.h>
#include <sys/poll.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbcdc.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include <dev/usb/usbdevs.h>
#include <dev/usb/usb_quirks.h>
#include <dev/usb/usbdevs.h>
#include <dev/usb/ucomvar.h>
#ifdef USB_DEBUG
int umodemdebug = 0;
SYSCTL_NODE(_hw_usb, OID_AUTO, umodem, CTLFLAG_RW, 0, "USB umodem");
SYSCTL_INT(_hw_usb_umodem, OID_AUTO, debug, CTLFLAG_RW,
&umodemdebug, 0, "umodem debug level");
#define DPRINTFN(n, x) if (umodemdebug > (n)) logprintf x
#else
#define DPRINTFN(n, x)
#endif
#define DPRINTF(x) DPRINTFN(0, x)
/*
* These are the maximum number of bytes transferred per frame.
* If some really high speed devices should use this driver they
* may need to be increased, but this is good enough for normal modems.
*/
#define UMODEMIBUFSIZE 64
#define UMODEMOBUFSIZE 256
#define UMODEM_MODVER 1 /* module version */
struct umodem_softc {
struct ucom_softc sc_ucom;
USBBASEDEVICE sc_dev; /* base device */
usbd_device_handle sc_udev; /* USB device */
int sc_ctl_iface_no;
usbd_interface_handle sc_ctl_iface; /* control interface */
int sc_data_iface_no;
usbd_interface_handle sc_data_iface; /* data interface */
int sc_cm_cap; /* CM capabilities */
int sc_acm_cap; /* ACM capabilities */
int sc_cm_over_data;
usb_cdc_line_state_t sc_line_state; /* current line state */
u_char sc_dtr; /* current DTR state */
u_char sc_rts; /* current RTS state */
u_char sc_opening; /* lock during open */
int sc_ctl_notify; /* Notification endpoint */
usbd_pipe_handle sc_notify_pipe; /* Notification pipe */
usb_cdc_notification_t sc_notify_buf; /* Notification structure */
u_char sc_lsr; /* Local status register */
u_char sc_msr; /* Modem status register */
};
Static void *umodem_get_desc(usbd_device_handle dev, int type, int subtype);
Static usbd_status umodem_set_comm_feature(struct umodem_softc *sc,
int feature, int state);
Static usbd_status umodem_set_line_coding(struct umodem_softc *sc,
usb_cdc_line_state_t *state);
Static void umodem_get_caps(usbd_device_handle, int *, int *);
Static void umodem_get_status(void *, int portno, u_char *lsr, u_char *msr);
Static void umodem_set(void *, int, int, int);
Static void umodem_dtr(struct umodem_softc *, int);
Static void umodem_rts(struct umodem_softc *, int);
Static void umodem_break(struct umodem_softc *, int);
Static void umodem_set_line_state(struct umodem_softc *);
Static int umodem_param(void *, int, struct termios *);
Static int umodem_ioctl(void *, int, u_long, caddr_t, int, usb_proc_ptr );
Static int umodem_open(void *, int portno);
Static void umodem_close(void *, int portno);
Static void umodem_intr(usbd_xfer_handle, usbd_private_handle, usbd_status);
Static struct ucom_callback umodem_callback = {
umodem_get_status,
umodem_set,
umodem_param,
umodem_ioctl,
umodem_open,
umodem_close,
NULL,
NULL,
};
Static device_probe_t umodem_match;
Static device_attach_t umodem_attach;
Static device_detach_t umodem_detach;
Static device_method_t umodem_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, umodem_match),
DEVMETHOD(device_attach, umodem_attach),
DEVMETHOD(device_detach, umodem_detach),
{ 0, 0 }
};
Static driver_t umodem_driver = {
"ucom",
umodem_methods,
sizeof (struct umodem_softc)
};
DRIVER_MODULE(umodem, uhub, umodem_driver, ucom_devclass, usbd_driver_load, 0);
MODULE_DEPEND(umodem, usb, 1, 1, 1);
MODULE_DEPEND(umodem, ucom, UCOM_MINVER, UCOM_PREFVER, UCOM_MAXVER);
MODULE_VERSION(umodem, UMODEM_MODVER);
USB_MATCH(umodem)
{
USB_MATCH_START(umodem, uaa);
usb_interface_descriptor_t *id;
int cm, acm;
if (uaa->iface == NULL)
return (UMATCH_NONE);
id = usbd_get_interface_descriptor(uaa->iface);
if (id == NULL ||
id->bInterfaceClass != UICLASS_CDC ||
id->bInterfaceSubClass != UISUBCLASS_ABSTRACT_CONTROL_MODEL ||
id->bInterfaceProtocol != UIPROTO_CDC_AT)
return (UMATCH_NONE);
umodem_get_caps(uaa->device, &cm, &acm);
if (!(cm & USB_CDC_CM_DOES_CM) ||
!(cm & USB_CDC_CM_OVER_DATA) ||
!(acm & USB_CDC_ACM_HAS_LINE))
return (UMATCH_NONE);
return (UMATCH_IFACECLASS_IFACESUBCLASS_IFACEPROTO);
}
USB_ATTACH(umodem)
{
USB_ATTACH_START(umodem, sc, uaa);
usbd_device_handle dev = uaa->device;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
usb_cdc_cm_descriptor_t *cmd;
char *devinfo = NULL;
const char *devname;
usbd_status err;
int data_ifcno;
int i;
struct ucom_softc *ucom;
devinfo = malloc(1024, M_USBDEV, M_WAITOK);
usbd_devinfo(dev, 0, devinfo);
ucom = &sc->sc_ucom;
ucom->sc_dev = self;
sc->sc_dev = self;
device_set_desc_copy(self, devinfo);
ucom->sc_udev = dev;
ucom->sc_iface = uaa->iface;
/*USB_ATTACH_SETUP; */
sc->sc_udev = dev;
sc->sc_ctl_iface = uaa->iface;
devname = USBDEVNAME(sc->sc_dev);
/* XXX ? use something else ? XXX */
id = usbd_get_interface_descriptor(sc->sc_ctl_iface);
printf("%s: %s, iclass %d/%d\n", devname, devinfo,
id->bInterfaceClass, id->bInterfaceSubClass);
sc->sc_ctl_iface_no = id->bInterfaceNumber;
umodem_get_caps(dev, &sc->sc_cm_cap, &sc->sc_acm_cap);
/* Get the data interface no. */
cmd = umodem_get_desc(dev, UDESC_CS_INTERFACE, UDESCSUB_CDC_CM);
if (cmd == NULL) {
printf("%s: no CM descriptor\n", devname);
goto bad;
}
sc->sc_data_iface_no = data_ifcno = cmd->bDataInterface;
printf("%s: data interface %d, has %sCM over data, has %sbreak\n",
devname, data_ifcno,
sc->sc_cm_cap & USB_CDC_CM_OVER_DATA ? "" : "no ",
sc->sc_acm_cap & USB_CDC_ACM_HAS_BREAK ? "" : "no ");
/* Get the data interface too. */
for (i = 0; i < uaa->nifaces; i++) {
if (uaa->ifaces[i] != NULL) {
id = usbd_get_interface_descriptor(uaa->ifaces[i]);
if (id != NULL && id->bInterfaceNumber == data_ifcno) {
sc->sc_data_iface = uaa->ifaces[i];
uaa->ifaces[i] = NULL;
}
}
}
if (sc->sc_data_iface == NULL) {
printf("%s: no data interface\n", devname);
goto bad;
}
ucom->sc_iface = sc->sc_data_iface;
/*
* Find the bulk endpoints.
* Iterate over all endpoints in the data interface and take note.
*/
ucom->sc_bulkin_no = ucom->sc_bulkout_no = -1;
id = usbd_get_interface_descriptor(sc->sc_data_iface);
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_data_iface, i);
if (ed == NULL) {
printf("%s: no endpoint descriptor for %d\n", devname,
i);
goto bad;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
ucom->sc_bulkin_no = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
ucom->sc_bulkout_no = ed->bEndpointAddress;
}
}
if (ucom->sc_bulkin_no == -1) {
printf("%s: Could not find data bulk in\n", devname);
goto bad;
}
if (ucom->sc_bulkout_no == -1) {
printf("%s: Could not find data bulk out\n", devname);
goto bad;
}
if (usbd_get_quirks(sc->sc_udev)->uq_flags & UQ_ASSUME_CM_OVER_DATA) {
DPRINTF(("Quirk says to assume CM over data\n"));
sc->sc_cm_over_data = 1;
} else {
if (sc->sc_cm_cap & USB_CDC_CM_OVER_DATA) {
if (sc->sc_acm_cap & USB_CDC_ACM_HAS_FEATURE)
err = umodem_set_comm_feature(sc,
UCDC_ABSTRACT_STATE, UCDC_DATA_MULTIPLEXED);
else
err = 0;
if (err) {
printf("%s: could not set data multiplex mode\n",
devname);
goto bad;
}
sc->sc_cm_over_data = 1;
}
}
/*
* The standard allows for notification messages (to indicate things
* like a modem hangup) to come in via an interrupt endpoint
* off of the control interface. Iterate over the endpoints on
* the control interface and see if there are any interrupt
* endpoints; if there are, then register it.
*/
sc->sc_ctl_notify = -1;
sc->sc_notify_pipe = NULL;
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_ctl_iface, i);
if (ed == NULL)
continue;
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
(ed->bmAttributes & UE_XFERTYPE) == UE_INTERRUPT) {
printf("%s: status change notification available\n",
devname);
sc->sc_ctl_notify = ed->bEndpointAddress;
}
}
sc->sc_dtr = -1;
ucom->sc_parent = sc;
ucom->sc_portno = UCOM_UNK_PORTNO;
/* bulkin, bulkout set above */
ucom->sc_ibufsize = UMODEMIBUFSIZE;
ucom->sc_obufsize = UMODEMOBUFSIZE;
ucom->sc_ibufsizepad = UMODEMIBUFSIZE;
ucom->sc_opkthdrlen = 0;
ucom->sc_callback = &umodem_callback;
ucom_attach(&sc->sc_ucom);
free(devinfo, M_USBDEV);
USB_ATTACH_SUCCESS_RETURN;
bad:
ucom->sc_dying = 1;
free(devinfo, M_USBDEV);
USB_ATTACH_ERROR_RETURN;
}
Static int
umodem_open(void *addr, int portno)
{
struct umodem_softc *sc = addr;
int err;
DPRINTF(("umodem_open: sc=%p\n", sc));
if (sc->sc_ctl_notify != -1 && sc->sc_notify_pipe == NULL) {
err = usbd_open_pipe_intr(sc->sc_ctl_iface, sc->sc_ctl_notify,
USBD_SHORT_XFER_OK, &sc->sc_notify_pipe, sc,
&sc->sc_notify_buf, sizeof(sc->sc_notify_buf),
umodem_intr, USBD_DEFAULT_INTERVAL);
if (err) {
DPRINTF(("Failed to establish notify pipe: %s\n",
usbd_errstr(err)));
return EIO;
}
}
return 0;
}
Static void
umodem_close(void *addr, int portno)
{
struct umodem_softc *sc = addr;
int err;
DPRINTF(("umodem_close: sc=%p\n", sc));
if (sc->sc_notify_pipe != NULL) {
err = usbd_abort_pipe(sc->sc_notify_pipe);
if (err)
printf("%s: abort notify pipe failed: %s\n",
USBDEVNAME(sc->sc_dev), usbd_errstr(err));
err = usbd_close_pipe(sc->sc_notify_pipe);
if (err)
printf("%s: close notify pipe failed: %s\n",
USBDEVNAME(sc->sc_dev), usbd_errstr(err));
sc->sc_notify_pipe = NULL;
}
}
Static void
umodem_intr(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
{
struct umodem_softc *sc = priv;
u_char mstatus;
if (sc->sc_ucom.sc_dying)
return;
if (status != USBD_NORMAL_COMPLETION) {
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
return;
printf("%s: abnormal status: %s\n", USBDEVNAME(sc->sc_dev),
usbd_errstr(status));
return;
}
if (sc->sc_notify_buf.bmRequestType != UCDC_NOTIFICATION) {
DPRINTF(("%s: unknown message type (%02x) on notify pipe\n",
USBDEVNAME(sc->sc_dev),
sc->sc_notify_buf.bmRequestType));
return;
}
switch (sc->sc_notify_buf.bNotification) {
case UCDC_N_SERIAL_STATE:
/*
* Set the serial state in ucom driver based on
* the bits from the notify message
*/
if (UGETW(sc->sc_notify_buf.wLength) != 2) {
printf("%s: Invalid notification length! (%d)\n",
USBDEVNAME(sc->sc_dev),
UGETW(sc->sc_notify_buf.wLength));
break;
}
DPRINTF(("%s: notify bytes = %02x%02x\n",
USBDEVNAME(sc->sc_dev),
sc->sc_notify_buf.data[0],
sc->sc_notify_buf.data[1]));
/* Currently, lsr is always zero. */
sc->sc_lsr = sc->sc_msr = 0;
mstatus = sc->sc_notify_buf.data[0];
if (ISSET(mstatus, UCDC_N_SERIAL_RI))
sc->sc_msr |= UMSR_RI;
if (ISSET(mstatus, UCDC_N_SERIAL_DSR))
sc->sc_msr |= UMSR_DSR;
if (ISSET(mstatus, UCDC_N_SERIAL_DCD))
sc->sc_msr |= UMSR_DCD;
ucom_status_change(&sc->sc_ucom);
break;
default:
DPRINTF(("%s: unknown notify message: %02x\n",
USBDEVNAME(sc->sc_dev),
sc->sc_notify_buf.bNotification));
break;
}
}
void
umodem_get_caps(usbd_device_handle dev, int *cm, int *acm)
{
usb_cdc_cm_descriptor_t *cmd;
usb_cdc_acm_descriptor_t *cad;
*cm = *acm = 0;
cmd = umodem_get_desc(dev, UDESC_CS_INTERFACE, UDESCSUB_CDC_CM);
if (cmd == NULL) {
DPRINTF(("umodem_get_desc: no CM desc\n"));
return;
}
*cm = cmd->bmCapabilities;
cad = umodem_get_desc(dev, UDESC_CS_INTERFACE, UDESCSUB_CDC_ACM);
if (cad == NULL) {
DPRINTF(("umodem_get_desc: no ACM desc\n"));
return;
}
*acm = cad->bmCapabilities;
}
void
umodem_get_status(void *addr, int portno, u_char *lsr, u_char *msr)
{
struct umodem_softc *sc = addr;
DPRINTF(("umodem_get_status:\n"));
if (lsr != NULL)
*lsr = sc->sc_lsr;
if (msr != NULL)
*msr = sc->sc_msr;
}
int
umodem_param(void *addr, int portno, struct termios *t)
{
struct umodem_softc *sc = addr;
usbd_status err;
usb_cdc_line_state_t ls;
DPRINTF(("umodem_param: sc=%p\n", sc));
USETDW(ls.dwDTERate, t->c_ospeed);
if (ISSET(t->c_cflag, CSTOPB))
ls.bCharFormat = UCDC_STOP_BIT_2;
else
ls.bCharFormat = UCDC_STOP_BIT_1;
if (ISSET(t->c_cflag, PARENB)) {
if (ISSET(t->c_cflag, PARODD))
ls.bParityType = UCDC_PARITY_ODD;
else
ls.bParityType = UCDC_PARITY_EVEN;
} else
ls.bParityType = UCDC_PARITY_NONE;
switch (ISSET(t->c_cflag, CSIZE)) {
case CS5:
ls.bDataBits = 5;
break;
case CS6:
ls.bDataBits = 6;
break;
case CS7:
ls.bDataBits = 7;
break;
case CS8:
ls.bDataBits = 8;
break;
}
err = umodem_set_line_coding(sc, &ls);
if (err) {
DPRINTF(("umodem_param: err=%s\n", usbd_errstr(err)));
return (ENOTTY);
}
return (0);
}
int
umodem_ioctl(void *addr, int portno, u_long cmd, caddr_t data, int flag,
usb_proc_ptr p)
{
struct umodem_softc *sc = addr;
int error = 0;
if (sc->sc_ucom.sc_dying)
return (EIO);
DPRINTF(("umodemioctl: cmd=0x%08lx\n", cmd));
switch (cmd) {
case USB_GET_CM_OVER_DATA:
*(int *)data = sc->sc_cm_over_data;
break;
case USB_SET_CM_OVER_DATA:
if (*(int *)data != sc->sc_cm_over_data) {
/* XXX change it */
}
break;
default:
DPRINTF(("umodemioctl: unknown\n"));
error = ENOTTY;
break;
}
return (error);
}
void
umodem_dtr(struct umodem_softc *sc, int onoff)
{
DPRINTF(("umodem_modem: onoff=%d\n", onoff));
if (sc->sc_dtr == onoff)
return;
sc->sc_dtr = onoff;
umodem_set_line_state(sc);
}
void
umodem_rts(struct umodem_softc *sc, int onoff)
{
DPRINTF(("umodem_modem: onoff=%d\n", onoff));
if (sc->sc_rts == onoff)
return;
sc->sc_rts = onoff;
umodem_set_line_state(sc);
}
void
umodem_set_line_state(struct umodem_softc *sc)
{
usb_device_request_t req;
int ls;
ls = (sc->sc_dtr ? UCDC_LINE_DTR : 0) |
(sc->sc_rts ? UCDC_LINE_RTS : 0);
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
USETW(req.wValue, ls);
USETW(req.wIndex, sc->sc_ctl_iface_no);
USETW(req.wLength, 0);
(void)usbd_do_request(sc->sc_udev, &req, 0);
}
void
umodem_break(struct umodem_softc *sc, int onoff)
{
usb_device_request_t req;
DPRINTF(("umodem_break: onoff=%d\n", onoff));
if (!(sc->sc_acm_cap & USB_CDC_ACM_HAS_BREAK))
return;
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
req.bRequest = UCDC_SEND_BREAK;
USETW(req.wValue, onoff ? UCDC_BREAK_ON : UCDC_BREAK_OFF);
USETW(req.wIndex, sc->sc_ctl_iface_no);
USETW(req.wLength, 0);
(void)usbd_do_request(sc->sc_udev, &req, 0);
}
void
umodem_set(void *addr, int portno, int reg, int onoff)
{
struct umodem_softc *sc = addr;
switch (reg) {
case UCOM_SET_DTR:
umodem_dtr(sc, onoff);
break;
case UCOM_SET_RTS:
umodem_rts(sc, onoff);
break;
case UCOM_SET_BREAK:
umodem_break(sc, onoff);
break;
default:
break;
}
}
usbd_status
umodem_set_line_coding(struct umodem_softc *sc, usb_cdc_line_state_t *state)
{
usb_device_request_t req;
usbd_status err;
DPRINTF(("umodem_set_line_coding: rate=%d fmt=%d parity=%d bits=%d\n",
UGETDW(state->dwDTERate), state->bCharFormat,
state->bParityType, state->bDataBits));
if (memcmp(state, &sc->sc_line_state, UCDC_LINE_STATE_LENGTH) == 0) {
DPRINTF(("umodem_set_line_coding: already set\n"));
return (USBD_NORMAL_COMPLETION);
}
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
req.bRequest = UCDC_SET_LINE_CODING;
USETW(req.wValue, 0);
USETW(req.wIndex, sc->sc_ctl_iface_no);
USETW(req.wLength, UCDC_LINE_STATE_LENGTH);
err = usbd_do_request(sc->sc_udev, &req, state);
if (err) {
DPRINTF(("umodem_set_line_coding: failed, err=%s\n",
usbd_errstr(err)));
return (err);
}
sc->sc_line_state = *state;
return (USBD_NORMAL_COMPLETION);
}
void *
umodem_get_desc(usbd_device_handle dev, int type, int subtype)
{
usb_descriptor_t *desc;
usb_config_descriptor_t *cd = usbd_get_config_descriptor(dev);
uByte *p = (uByte *)cd;
uByte *end = p + UGETW(cd->wTotalLength);
while (p < end) {
desc = (usb_descriptor_t *)p;
if (desc->bDescriptorType == type &&
desc->bDescriptorSubtype == subtype)
return (desc);
p += desc->bLength;
}
return (0);
}
usbd_status
umodem_set_comm_feature(struct umodem_softc *sc, int feature, int state)
{
usb_device_request_t req;
usbd_status err;
usb_cdc_abstract_state_t ast;
DPRINTF(("umodem_set_comm_feature: feature=%d state=%d\n", feature,
state));
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
req.bRequest = UCDC_SET_COMM_FEATURE;
USETW(req.wValue, feature);
USETW(req.wIndex, sc->sc_ctl_iface_no);
USETW(req.wLength, UCDC_ABSTRACT_STATE_LENGTH);
USETW(ast.wState, state);
err = usbd_do_request(sc->sc_udev, &req, &ast);
if (err) {
DPRINTF(("umodem_set_comm_feature: feature=%d, err=%s\n",
feature, usbd_errstr(err)));
return (err);
}
return (USBD_NORMAL_COMPLETION);
}
USB_DETACH(umodem)
{
USB_DETACH_START(umodem, sc);
int rv = 0;
DPRINTF(("umodem_detach: sc=%p\n", sc));
if (sc->sc_notify_pipe != NULL) {
usbd_abort_pipe(sc->sc_notify_pipe);
usbd_close_pipe(sc->sc_notify_pipe);
sc->sc_notify_pipe = NULL;
}
sc->sc_ucom.sc_dying = 1;
rv = ucom_detach(&sc->sc_ucom);
return (rv);
}