freebsd with flexible iflib nic queues
67f06b6142
1) Make the driver "quiet" by sticking most boot messages behind bootverbose conditionals. This means that you won't see the sync and wide negotiation, but you will find out if they fail. 2) Add support to the 93cx6 serial eeprom code to read at an abitrary offset. This is needed so that we can access the second half of the eeprom on 3940 cards where the second channel's config is stored. 3) Add flags argument to ahcprobe(). This is used by the pci probe code to tell the generic driver that an adapter should be treated as a channel B device as well as notify it of the presence of external SCB SRAM. These are needed for some motherboard implementations of the aic7870 and for the 3940 controllers. 4) Print "Channel A"/"Channel B" instead of "Single Channel" for the two busses of the 3940. I received many reports of confusion about how the 3940 was probed since most people belived that only one ahc entry was needed. This will hopefully make it clearer. 5) Walk the SCBs to determine just how many their are if external SCB ram is detected. 6) Hard code that external SCB ram is present for the 3940 since it doesn't use the documented reporting facility for reporting the SRAM. :( 255 commands per channel are supported on the 3940. 7) Read the seeprom starting at addres 32 for the second channel of the 3940 so we get the right info for that channel. 8) Clean up printing of the "Disabling tagged queuing message". 9) Queue timeouts if they occur while we are handling a timeout. The code was totally unprotected in this scenario. Reviewed by: Timeout code reviewed by David Greenman <davidg> |
||
|---|---|---|
| bin | ||
| eBones | ||
| etc | ||
| games | ||
| gnu | ||
| include | ||
| lib | ||
| libexec | ||
| lkm | ||
| release | ||
| sbin | ||
| secure | ||
| share | ||
| sys | ||
| tools/regression/usr.bin/sed | ||
| usr.bin | ||
| usr.sbin | ||
| COPYRIGHT | ||
| CVS-INFO | ||
| HW.TROUBLE | ||
| Makefile | ||
| README | ||
| TODO | ||
-----------------------------------------
FreeBSD 2.0 --- ALPHA Release , ,
----------------------------------------- /( )`
\ \___ / |
Welcome to the ALPHA release of FreeBSD 2.0 - the /- _ `-/ '
first public snapshot of our new 4.4BSD Lite based (/\/ \ \ /\
operating system environment. This install proce- / / | ` \
dure is also at the ALPHA stage, and contains only O O ) / |
the minimum functionality required by an `-^--'`< '
*EXPERIENCED* person to install the system. (_.) _ ) /
It is our hope, of course, that the feedback `.___/` /
provided from this snapshot will `-----' /
greatly assist us in making the release <----. __ / __ \
of 2.0 much more user friendly. Your <----|====O)))==) \) /====
comments and criticisms are very <----' `--' `.__,' \
valuable to us, so please don't hesitate | |
in contacting us! Full details on where and \ / /\
how to provide feedback are given below. ______( (_ / \______/
,' ,-----' |
This install procedure is ALPHA code, and `--{__________)
may very possibly *DESTROY* the contents of your
ENTIRE DISK! Please do not proceed with this installation
unless you've adequately backed up your data first!
If any errors occur during this installation, you can see them
by toggling over to the alternate screen - type ALT-F2 to switch
over, ALT-F1 to switch back to the install screen. The debugging
output on the second screen may be very valuable to us in understanding
your bug report, so please be sure to take note of it when reporting
any failures in the installation! Thanks!
Menus and scrolling output windows may be traversed with the arrow
and Page Up/Page Down keys. To suspend the installation at any point,
hit ESC twice. Hitting TAB will move the focus to different controls.
If you've ever dealt with a DOS installation, you'll know how to deal
with this.
For a more complete description of what's new in this release, please
see the release notes.
For more documentation on this system, it is recommended that you purchase
the 4.4BSD Document Set from O'Reilly Associates and the USENIX Association.
ISBN 1-56592-082-1 We have no connection with O'Reilly, we're just
satisfied customers!
Have fun, and please let us know of any problems you encounter with
this release!
Comments should be sent to:
hackers@FreeBSD.org
Bug reports should be sent using the `send-pr' utility, if you
were able to get the system installed, otherwise to:
bugs@FreeBSD.org
And general questions to:
questions@FreeBSD.org
Please have patience if your questions are not answered right away -
this is an especially busy time for us, and our volunteer resources
are often strained to the limit (if not somewhat past!).
Thanks!
The FreeBSD Project