7c219eac8f
wdreg.h: Delete wd_ctlr macro. PC98 version of wd.c treats it as a variable. GENERIC98: Delete ep0 entry. Current ep driver write I/O port 0x100. This clobbers ICW of i8259, because upper 8bits of address line is not masked on mother board. if_fe.c: Merge from revision 1.18 of sys/i386/isa/if_fe.c. pc98.c: Globalize dmapageport, because SCSI driver use this variable. wd82371.c: Yet another merge. These are 2.2 candidates. Submitted by: The FreeBSD(98) Development Team
219 lines
8.5 KiB
C
219 lines
8.5 KiB
C
/*-
|
|
* Copyright (c) 1991 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* William Jolitz.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from: @(#)wdreg.h 7.1 (Berkeley) 5/9/91
|
|
* $Id: wdreg.h,v 1.13 1996/11/02 10:37:08 asami Exp $
|
|
*/
|
|
|
|
/*
|
|
* modified for PC9801 by F.Ukai
|
|
* Kyoto University Microcomputer Club (KMC)
|
|
*/
|
|
|
|
/*
|
|
* Disk Controller register definitions.
|
|
*/
|
|
#ifdef PC98
|
|
#define wd_data 0x0 /* data register (R/W - 16 bits) */
|
|
#define wd_error 0x2 /* error register (R) */
|
|
#define wd_precomp wd_error /* write precompensation (W) */
|
|
#define wd_features wd_error /* features register (W) */
|
|
#define wd_seccnt 0x4 /* sector count (R/W) */
|
|
#define wd_sector 0x6 /* first sector number (R/W) */
|
|
#define wd_cyl_lo 0x8 /* cylinder address, low byte (R/W) */
|
|
#define wd_cyl_hi 0xa /* cylinder address, high byte (R/W)*/
|
|
#define wd_sdh 0xc /* sector size/drive/head (R/W)*/
|
|
#define wd_command 0xe /* command register (W) */
|
|
#define wd_status wd_command /* immediate status (R) */
|
|
|
|
#define wd_altsts_nec 0x10c /*alternate fixed disk status(via 1015) (R)*/
|
|
#define wd_ctlr_nec 0x10c /*fixed disk controller control(via 1015) (W)*/
|
|
#define wd_altsts_epson 0x3 /*alternate fixed disk status(via 1015) (R)*/
|
|
#define wd_ctlr_epson 0x3 /*fixed disk controller control(via 1015) (W)*/
|
|
#define wd_altsts wd_alsts_nec
|
|
|
|
#define WDCTL_4BIT 0x8 /* use four head bits (wd1003) */
|
|
#define WDCTL_RST 0x4 /* reset the controller */
|
|
#define WDCTL_IDS 0x2 /* disable controller interrupts */
|
|
#define wd_digin 0x10e /* disk controller input(via 1015) (R)*/
|
|
#else /* IBM-PC */
|
|
#define wd_data 0x0 /* data register (R/W - 16 bits) */
|
|
#define wd_error 0x1 /* error register (R) */
|
|
#define wd_precomp wd_error /* write precompensation (W) */
|
|
#define wd_features wd_error /* features register (W) */
|
|
#define wd_seccnt 0x2 /* sector count (R/W) */
|
|
#define wd_sector 0x3 /* first sector number (R/W) */
|
|
#define wd_cyl_lo 0x4 /* cylinder address, low byte (R/W) */
|
|
#define wd_cyl_hi 0x5 /* cylinder address, high byte (R/W)*/
|
|
#define wd_sdh 0x6 /* sector size/drive/head (R/W)*/
|
|
#define wd_command 0x7 /* command register (W) */
|
|
#define wd_status wd_command /* immediate status (R) */
|
|
|
|
#define wd_altsts 0x206 /*alternate fixed disk status(via 1015) (R)*/
|
|
#define wd_ctlr 0x206 /*fixed disk controller control(via 1015) (W)*/
|
|
#define WDCTL_4BIT 0x8 /* use four head bits (wd1003) */
|
|
#define WDCTL_RST 0x4 /* reset the controller */
|
|
#define WDCTL_IDS 0x2 /* disable controller interrupts */
|
|
#define wd_digin 0x207 /* disk controller input(via 1015) (R)*/
|
|
#endif /* PC98 */
|
|
|
|
/*
|
|
* Status Bits.
|
|
*/
|
|
#define WDCS_BUSY 0x80 /* Controller busy bit. */
|
|
#define WDCS_READY 0x40 /* Selected drive is ready */
|
|
#define WDCS_WRTFLT 0x20 /* Write fault */
|
|
#define WDCS_SEEKCMPLT 0x10 /* Seek complete */
|
|
#define WDCS_DRQ 0x08 /* Data request bit. */
|
|
#define WDCS_ECCCOR 0x04 /* ECC correction made in data */
|
|
#define WDCS_INDEX 0x02 /* Index pulse from selected drive */
|
|
#define WDCS_ERR 0x01 /* Error detect bit. */
|
|
|
|
#define WDCS_BITS "\020\010busy\007rdy\006wrtflt\005seekdone\004drq\003ecc_cor\002index\001err"
|
|
#define WDERR_ABORT 0x04
|
|
|
|
#define WDERR_BITS "\020\010badblk\007uncorr\006id_crc\005no_id\003abort\002tr000\001no_dam"
|
|
|
|
/*
|
|
* Commands for Disk Controller.
|
|
*/
|
|
#define WDCC_RESTORE 0x10 /* disk restore code -- resets cntlr */
|
|
|
|
#define WDCC_READ 0x20 /* disk read code */
|
|
#define WDCC_WRITE 0x30 /* disk write code */
|
|
#define WDCC__LONG 0x02 /* modifier -- access ecc bytes */
|
|
#define WDCC__NORETRY 0x01 /* modifier -- no retrys */
|
|
|
|
#define WDCC_FORMAT 0x50 /* disk format code */
|
|
#define WDCC_DIAGNOSE 0x90 /* controller diagnostic */
|
|
#define WDCC_IDC 0x91 /* initialize drive command */
|
|
#define WDCC_READ_MULTI 0xC4 /* read multiple */
|
|
#define WDCC_WRITE_MULTI 0xC5 /* write multiple */
|
|
#define WDCC_SET_MULTI 0xC6 /* set multiple count */
|
|
|
|
|
|
#define WDCC_EXTDCMD 0xE0 /* send extended command */
|
|
#define WDCC_READP 0xEC /* read parameters from controller */
|
|
#define WDCC_FEATURES 0xEF /* features control */
|
|
|
|
#define WDFEA_RCACHE 0xAA /* read cache enable */
|
|
#define WDFEA_WCACHE 0x02 /* write cache enable */
|
|
|
|
#define WD_STEP 0 /* winchester- default 35us step */
|
|
|
|
#define WDSD_IBM 0xa0 /* forced to 512 byte sector, ecc */
|
|
|
|
#ifdef KERNEL
|
|
/*
|
|
* read parameters command returns this:
|
|
*/
|
|
struct wdparams {
|
|
/* drive info */
|
|
short wdp_config; /* general configuration bits */
|
|
short wdp_cylinders; /* number of cylinders */
|
|
short wdp_reserved;
|
|
short wdp_heads; /* number of heads */
|
|
short wdp_unfbytespertrk; /* number of unformatted bytes/track */
|
|
short wdp_unfbytes; /* number of unformatted bytes/sector */
|
|
short wdp_sectors; /* number of sectors per track */
|
|
short wdp_vendorunique[3];
|
|
/* controller info */
|
|
char wdp_serial[20]; /* serial number */
|
|
short wdp_buffertype; /* buffer type */
|
|
#define WDTYPE_SINGLEPORTSECTOR 1 /* single port, single sector buffer */
|
|
#define WDTYPE_DUALPORTMULTI 2 /* dual port, multiple sector buffer */
|
|
#define WDTYPE_DUALPORTMULTICACHE 3 /* above plus track cache */
|
|
short wdp_buffersize; /* buffer size, in 512-byte units */
|
|
short wdp_necc; /* ecc bytes appended */
|
|
char wdp_rev[8]; /* firmware revision */
|
|
char wdp_model[40]; /* model name */
|
|
short wdp_nsecperint; /* sectors per interrupt */
|
|
short wdp_usedmovsd; /* can use double word read/write? */
|
|
};
|
|
|
|
/*
|
|
* wd driver entry points
|
|
*/
|
|
#ifdef B_FORMAT
|
|
int wdformat(struct buf *bp);
|
|
#endif
|
|
|
|
/*
|
|
* IDE DMA support.
|
|
* This is based on what is needed for the IDE DMA function of the Intel
|
|
* Triton chipset; hopefully it's general enough to be used for other
|
|
* chipsets as well.
|
|
*
|
|
* To use this:
|
|
* For each drive which you might want to do DMA on, call wdd_candma()
|
|
* to get a cookie. If it returns a null pointer, then the drive
|
|
* can't do DMA.
|
|
*
|
|
* Set up the transfer be calling wdd_dmaprep(). The cookie is what
|
|
* you got before; vaddr is the virtual address of the buffer to be
|
|
* written; len is the length of the buffer; and direction is either
|
|
* B_READ or B_WRITE.
|
|
*
|
|
* Send a read/write DMA command to the drive.
|
|
*
|
|
* Call wdd_dmastart().
|
|
*
|
|
* Wait for an interrupt. Multi-sector transfers will only interrupt
|
|
* at the end of the transfer.
|
|
*
|
|
* Call wdd_dmadone(). It will return the status as defined by the
|
|
* WDDS_* constants below.
|
|
*/
|
|
struct wddma {
|
|
void *(*wdd_candma) /* returns a cookie if can do DMA */
|
|
__P((int ctlr, int drive));
|
|
int (*wdd_dmaprep) /* prepare DMA hardware */
|
|
__P((void *cookie, char *vaddr, u_long len, int direction));
|
|
void (*wdd_dmastart) /* begin DMA transfer */
|
|
__P((void *cookie));
|
|
int (*wdd_dmadone) /* DMA transfer completed */
|
|
__P((void *cookie));
|
|
int (*wdd_dmastatus) /* return status of DMA */
|
|
__P((void *cookie));
|
|
};
|
|
|
|
#define WDDS_ACTIVE 0x0001
|
|
#define WDDS_ERROR 0x0002
|
|
#define WDDS_INTERRUPT 0x0004
|
|
|
|
extern struct wddma wddma;
|
|
|
|
#endif /* KERNEL */
|