c37904e8ba
and start teaching subsystems about it. The Atheros MIPS platforms don't guarantee any kind of FIFO consistency with interrupts in hardware. So software needs to do a flush when it receives an interrupt and before it calls the interrupt handler. There are new ones for the QCA934x and QCA955x, so do a few things: * Get rid of the individual ones (for ethernet and IP2); * Create a mux and enum listing all the variations on DDR flushes; * replace the uses of IP2 with the relevant one (which will typically be "PCI" here); * call the USB DDR flush before calling the real USB interrupt handlers; * call the ethernet one upon receiving an interrupt that's for us, rather than never calling it during operation. Tested: * QCA9558 (TP-Link archer c7 v2) * AR9331 (Carambola 2) TODO: * PCI, USB, ethernet, etc need to do a double-check to see if the interrupt was truely for them before doing the DDR. For now I prefer "correct" over "fast".
227 lines
6.3 KiB
C
227 lines
6.3 KiB
C
/*-
|
|
* Copyright (c) 2009, Oleksandr Tymoshenko <gonzo@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice unmodified, this list of conditions, and the following
|
|
* disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/condvar.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
|
|
#include <dev/usb/usb_core.h>
|
|
#include <dev/usb/usb_busdma.h>
|
|
#include <dev/usb/usb_process.h>
|
|
#include <dev/usb/usb_util.h>
|
|
|
|
#include <dev/usb/usb_controller.h>
|
|
#include <dev/usb/usb_bus.h>
|
|
#include <dev/usb/controller/ohci.h>
|
|
#include <dev/usb/controller/ohcireg.h>
|
|
|
|
#include <mips/atheros/ar71xxreg.h> /* for stuff in ar71xx_cpudef.h */
|
|
#include <mips/atheros/ar71xx_cpudef.h>
|
|
|
|
static int ar71xx_ohci_attach(device_t dev);
|
|
static int ar71xx_ohci_detach(device_t dev);
|
|
static int ar71xx_ohci_probe(device_t dev);
|
|
|
|
struct ar71xx_ohci_softc
|
|
{
|
|
struct ohci_softc sc_ohci;
|
|
};
|
|
|
|
static int
|
|
ar71xx_ohci_probe(device_t dev)
|
|
{
|
|
device_set_desc(dev, "AR71XX integrated OHCI controller");
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
static void
|
|
ar71xx_ohci_intr(void *arg)
|
|
{
|
|
|
|
/* XXX TODO: should really see if this was our interrupt.. */
|
|
ar71xx_device_flush_ddr(AR71XX_CPU_DDR_FLUSH_USB);
|
|
ohci_interrupt(arg);
|
|
}
|
|
|
|
|
|
static int
|
|
ar71xx_ohci_attach(device_t dev)
|
|
{
|
|
struct ar71xx_ohci_softc *sc = device_get_softc(dev);
|
|
int err;
|
|
int rid;
|
|
|
|
/* initialise some bus fields */
|
|
sc->sc_ohci.sc_bus.parent = dev;
|
|
sc->sc_ohci.sc_bus.devices = sc->sc_ohci.sc_devices;
|
|
sc->sc_ohci.sc_bus.devices_max = OHCI_MAX_DEVICES;
|
|
sc->sc_ohci.sc_bus.dma_bits = 32;
|
|
|
|
/* get all DMA memory */
|
|
if (usb_bus_mem_alloc_all(&sc->sc_ohci.sc_bus,
|
|
USB_GET_DMA_TAG(dev), &ohci_iterate_hw_softc)) {
|
|
return (ENOMEM);
|
|
}
|
|
|
|
sc->sc_ohci.sc_dev = dev;
|
|
|
|
rid = 0;
|
|
sc->sc_ohci.sc_io_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
|
|
RF_ACTIVE);
|
|
if (sc->sc_ohci.sc_io_res == NULL) {
|
|
err = ENOMEM;
|
|
goto error;
|
|
}
|
|
sc->sc_ohci.sc_io_tag = rman_get_bustag(sc->sc_ohci.sc_io_res);
|
|
sc->sc_ohci.sc_io_hdl = rman_get_bushandle(sc->sc_ohci.sc_io_res);
|
|
sc->sc_ohci.sc_io_size = rman_get_size(sc->sc_ohci.sc_io_res);
|
|
|
|
rid = 0;
|
|
sc->sc_ohci.sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
|
|
RF_ACTIVE);
|
|
if (sc->sc_ohci.sc_irq_res == NULL) {
|
|
err = ENOMEM;
|
|
goto error;
|
|
}
|
|
sc->sc_ohci.sc_bus.bdev = device_add_child(dev, "usbus", -1);
|
|
if (sc->sc_ohci.sc_bus.bdev == NULL) {
|
|
err = ENOMEM;
|
|
goto error;
|
|
}
|
|
device_set_ivars(sc->sc_ohci.sc_bus.bdev, &sc->sc_ohci.sc_bus);
|
|
|
|
err = bus_setup_intr(dev, sc->sc_ohci.sc_irq_res,
|
|
INTR_TYPE_BIO | INTR_MPSAFE, NULL,
|
|
ar71xx_ohci_intr, sc, &sc->sc_ohci.sc_intr_hdl);
|
|
if (err) {
|
|
err = ENXIO;
|
|
goto error;
|
|
}
|
|
|
|
strlcpy(sc->sc_ohci.sc_vendor, "Atheros", sizeof(sc->sc_ohci.sc_vendor));
|
|
|
|
bus_space_write_4(sc->sc_ohci.sc_io_tag, sc->sc_ohci.sc_io_hdl, OHCI_CONTROL, 0);
|
|
|
|
err = ohci_init(&sc->sc_ohci);
|
|
if (!err)
|
|
err = device_probe_and_attach(sc->sc_ohci.sc_bus.bdev);
|
|
|
|
if (err)
|
|
goto error;
|
|
return (0);
|
|
|
|
error:
|
|
if (err) {
|
|
ar71xx_ohci_detach(dev);
|
|
return (err);
|
|
}
|
|
return (err);
|
|
}
|
|
|
|
static int
|
|
ar71xx_ohci_detach(device_t dev)
|
|
{
|
|
struct ar71xx_ohci_softc *sc = device_get_softc(dev);
|
|
device_t bdev;
|
|
|
|
if (sc->sc_ohci.sc_bus.bdev) {
|
|
bdev = sc->sc_ohci.sc_bus.bdev;
|
|
device_detach(bdev);
|
|
device_delete_child(dev, bdev);
|
|
}
|
|
/* during module unload there are lots of children leftover */
|
|
device_delete_children(dev);
|
|
|
|
/*
|
|
* Put the controller into reset, then disable clocks and do
|
|
* the MI tear down. We have to disable the clocks/hardware
|
|
* after we do the rest of the teardown. We also disable the
|
|
* clocks in the opposite order we acquire them, but that
|
|
* doesn't seem to be absolutely necessary. We free up the
|
|
* clocks after we disable them, so the system could, in
|
|
* theory, reuse them.
|
|
*/
|
|
bus_space_write_4(sc->sc_ohci.sc_io_tag, sc->sc_ohci.sc_io_hdl,
|
|
OHCI_CONTROL, 0);
|
|
|
|
if (sc->sc_ohci.sc_intr_hdl) {
|
|
bus_teardown_intr(dev, sc->sc_ohci.sc_irq_res, sc->sc_ohci.sc_intr_hdl);
|
|
sc->sc_ohci.sc_intr_hdl = NULL;
|
|
}
|
|
|
|
if (sc->sc_ohci.sc_irq_res && sc->sc_ohci.sc_intr_hdl) {
|
|
/*
|
|
* only call ohci_detach() after ohci_init()
|
|
*/
|
|
ohci_detach(&sc->sc_ohci);
|
|
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sc_ohci.sc_irq_res);
|
|
sc->sc_ohci.sc_irq_res = NULL;
|
|
}
|
|
if (sc->sc_ohci.sc_io_res) {
|
|
bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_ohci.sc_io_res);
|
|
sc->sc_ohci.sc_io_res = NULL;
|
|
sc->sc_ohci.sc_io_tag = 0;
|
|
sc->sc_ohci.sc_io_hdl = 0;
|
|
}
|
|
usb_bus_mem_free_all(&sc->sc_ohci.sc_bus, &ohci_iterate_hw_softc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static device_method_t ohci_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, ar71xx_ohci_probe),
|
|
DEVMETHOD(device_attach, ar71xx_ohci_attach),
|
|
DEVMETHOD(device_detach, ar71xx_ohci_detach),
|
|
DEVMETHOD(device_suspend, bus_generic_suspend),
|
|
DEVMETHOD(device_resume, bus_generic_resume),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t ohci_driver = {
|
|
.name = "ohci",
|
|
.methods = ohci_methods,
|
|
.size = sizeof(struct ar71xx_ohci_softc),
|
|
};
|
|
|
|
static devclass_t ohci_devclass;
|
|
|
|
DRIVER_MODULE(ohci, apb, ohci_driver, ohci_devclass, 0, 0);
|