6c56727456
return through doreti to handle ast's. This is necessary for the clock interrupts to work properly. - Change the clock interrupts on the x86 to be fast instead of threaded. This is needed because both hardclock() and statclock() need to run in the context of the current process, not in a separate thread context. - Kill the prevproc hack as it is no longer needed. - We really need Giant when we call psignal(), but we don't want to block during the clock interrupt. Instead, use two p_flag's in the proc struct to mark the current process as having a pending SIGVTALRM or a SIGPROF and let them be delivered during ast() when hardclock() has finished running. - Remove CLKF_BASEPRI, which was #ifdef'd out on the x86 anyways. It was broken on the x86 if it was turned on since cpl is gone. It's only use was to bogusly run softclock() directly during hardclock() rather than scheduling an SWI. - Remove the COM_LOCK simplelock and replace it with a clock_lock spin mutex. Since the spin mutex already handles disabling/restoring interrupts appropriately, this also lets us axe all the *_intr() fu. - Back out the hacks in the APIC_IO x86 cpu_initclocks() code to use temporary fast interrupts for the APIC trial. - Add two new process flags P_ALRMPEND and P_PROFPEND to mark the pending signals in hardclock() that are to be delivered in ast(). Submitted by: jakeb (making statclock safe in a fast interrupt) Submitted by: cp (concept of delaying signals until ast())
184 lines
5.5 KiB
ArmAsm
184 lines
5.5 KiB
ArmAsm
/*
|
|
* from: vector.s, 386BSD 0.1 unknown origin
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* modified for PC98 by Kakefuda
|
|
*/
|
|
|
|
#ifdef PC98
|
|
#define ICU_IMR_OFFSET 2 /* IO_ICU{1,2} + 2 */
|
|
#else
|
|
#define ICU_IMR_OFFSET 1 /* IO_ICU{1,2} + 1 */
|
|
#endif
|
|
|
|
#define ICU_EOI 0x20 /* XXX - define elsewhere */
|
|
|
|
#define IRQ_BIT(irq_num) (1 << ((irq_num) % 8))
|
|
#define IRQ_BYTE(irq_num) ((irq_num) >> 3)
|
|
|
|
#ifdef AUTO_EOI_1
|
|
#define ENABLE_ICU1 /* use auto-EOI to reduce i/o */
|
|
#define OUTB_ICU1
|
|
#else
|
|
#define ENABLE_ICU1 \
|
|
movb $ICU_EOI,%al ; /* as soon as possible send EOI ... */ \
|
|
OUTB_ICU1 /* ... to clear in service bit */
|
|
#define OUTB_ICU1 \
|
|
outb %al,$IO_ICU1
|
|
#endif
|
|
|
|
#ifdef AUTO_EOI_2
|
|
/*
|
|
* The data sheet says no auto-EOI on slave, but it sometimes works.
|
|
*/
|
|
#define ENABLE_ICU1_AND_2 ENABLE_ICU1
|
|
#else
|
|
#define ENABLE_ICU1_AND_2 \
|
|
movb $ICU_EOI,%al ; /* as above */ \
|
|
outb %al,$IO_ICU2 ; /* but do second icu first ... */ \
|
|
OUTB_ICU1 /* ... then first icu (if !AUTO_EOI_1) */
|
|
#endif
|
|
|
|
/*
|
|
* Macros for interrupt interrupt entry, call to handler, and exit.
|
|
*/
|
|
|
|
#define FAST_INTR(irq_num, vec_name, enable_icus) \
|
|
.text ; \
|
|
SUPERALIGN_TEXT ; \
|
|
IDTVEC(vec_name) ; \
|
|
pushl $0 ; /* dummy error code */ \
|
|
pushl $0 ; /* dummy trap type */ \
|
|
pushal ; \
|
|
pushl %ds ; \
|
|
pushl %es ; \
|
|
pushl %fs ; \
|
|
mov $KDSEL,%ax ; \
|
|
mov %ax,%ds ; \
|
|
mov %ax,%es ; \
|
|
mov %ax,%fs ; \
|
|
FAKE_MCOUNT((12+ACTUALLY_PUSHED)*4(%esp)) ; \
|
|
incb _intr_nesting_level ; \
|
|
pushl _intr_unit + (irq_num) * 4 ; \
|
|
call *_intr_handler + (irq_num) * 4 ; /* do the work ASAP */ \
|
|
enable_icus ; /* (re)enable ASAP (helps edge trigger?) */ \
|
|
addl $4,%esp ; \
|
|
incl _cnt+V_INTR ; /* book-keeping can wait */ \
|
|
movl _intr_countp + (irq_num) * 4,%eax ; \
|
|
incl (%eax) ; \
|
|
MEXITCOUNT ; \
|
|
jmp doreti_next
|
|
|
|
#if 0
|
|
; \
|
|
ALIGN_TEXT ; \
|
|
2: ; \
|
|
cmpb $3,_intr_nesting_level ; /* is there enough stack? */ \
|
|
jae 1b ; /* no, return */ \
|
|
movl _cpl,%eax ; \
|
|
/* XXX next line is probably unnecessary now. */ \
|
|
movl $HWI_MASK|SWI_MASK,_cpl ; /* limit nesting ... */ \
|
|
incb _intr_nesting_level ; /* ... really limit it ... */ \
|
|
sti ; /* ... to do this as early as possible */ \
|
|
MAYBE_POPL_ES ; /* discard most of thin frame ... */ \
|
|
popl %fs ; \
|
|
popl %ecx ; /* ... original %ds ... */ \
|
|
popl %edx ; \
|
|
xchgl %eax,4(%esp) ; /* orig %eax; save cpl */ \
|
|
pushal ; /* build fat frame (grrr) ... */ \
|
|
pushl %ecx ; /* ... actually %ds ... */ \
|
|
pushl %es ; \
|
|
pushl %fs ; \
|
|
mov $KDSEL,%ax ; \
|
|
mov %ax,%es ; \
|
|
mov %ax,%fs ; \
|
|
movl (3+8+0)*4(%esp),%ecx ; /* ... %ecx from thin frame ... */ \
|
|
movl %ecx,(3+6)*4(%esp) ; /* ... to fat frame ... */ \
|
|
movl (3+8+1)*4(%esp),%eax ; /* ... cpl from thin frame */ \
|
|
subl $4,%esp ; /* junk for unit number */ \
|
|
MEXITCOUNT ; \
|
|
jmp _doreti
|
|
#endif
|
|
|
|
/*
|
|
* Slow, threaded interrupts.
|
|
*
|
|
* XXX Most of the parameters here are obsolete. Fix this when we're
|
|
* done.
|
|
* XXX we really shouldn't return via doreti if we just schedule the
|
|
* interrupt handler and don't run anything. We could just do an
|
|
* iret. FIXME.
|
|
*/
|
|
#define INTR(irq_num, vec_name, icu, enable_icus, reg, maybe_extra_ipending) \
|
|
.text ; \
|
|
SUPERALIGN_TEXT ; \
|
|
IDTVEC(vec_name) ; \
|
|
pushl $0 ; /* dummy error code */ \
|
|
pushl $0 ; /* dummy trap type */ \
|
|
pushal ; \
|
|
pushl %ds ; /* save our data and extra segments ... */ \
|
|
pushl %es ; \
|
|
pushl %fs ; \
|
|
mov $KDSEL,%ax ; /* load kernel ds, es and fs */ \
|
|
mov %ax,%ds ; \
|
|
mov %ax,%es ; \
|
|
mov %ax,%fs ; \
|
|
maybe_extra_ipending ; \
|
|
movb _imen + IRQ_BYTE(irq_num),%al ; \
|
|
orb $IRQ_BIT(irq_num),%al ; \
|
|
movb %al,_imen + IRQ_BYTE(irq_num) ; \
|
|
outb %al,$icu+ICU_IMR_OFFSET ; \
|
|
enable_icus ; \
|
|
incb _intr_nesting_level ; \
|
|
__CONCAT(Xresume,irq_num): ; \
|
|
FAKE_MCOUNT(13*4(%esp)) ; /* XXX late to avoid double count */ \
|
|
pushl $irq_num; /* pass the IRQ */ \
|
|
sti ; \
|
|
call _sched_ithd ; \
|
|
addl $4, %esp ; /* discard the parameter */ \
|
|
MEXITCOUNT ; \
|
|
/* We could usually avoid the following jmp by inlining some of */ \
|
|
/* _doreti, but it's probably better to use less cache. */ \
|
|
jmp doreti_next /* and catch up inside doreti */
|
|
|
|
MCOUNT_LABEL(bintr)
|
|
FAST_INTR(0,fastintr0, ENABLE_ICU1)
|
|
FAST_INTR(1,fastintr1, ENABLE_ICU1)
|
|
FAST_INTR(2,fastintr2, ENABLE_ICU1)
|
|
FAST_INTR(3,fastintr3, ENABLE_ICU1)
|
|
FAST_INTR(4,fastintr4, ENABLE_ICU1)
|
|
FAST_INTR(5,fastintr5, ENABLE_ICU1)
|
|
FAST_INTR(6,fastintr6, ENABLE_ICU1)
|
|
FAST_INTR(7,fastintr7, ENABLE_ICU1)
|
|
FAST_INTR(8,fastintr8, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(9,fastintr9, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(10,fastintr10, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(11,fastintr11, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(12,fastintr12, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(13,fastintr13, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(14,fastintr14, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(15,fastintr15, ENABLE_ICU1_AND_2)
|
|
|
|
#define CLKINTR_PENDING movl $1,CNAME(clkintr_pending)
|
|
/* Threaded interrupts */
|
|
INTR(0,intr0, IO_ICU1, ENABLE_ICU1, al, CLKINTR_PENDING)
|
|
INTR(1,intr1, IO_ICU1, ENABLE_ICU1, al,)
|
|
INTR(2,intr2, IO_ICU1, ENABLE_ICU1, al,)
|
|
INTR(3,intr3, IO_ICU1, ENABLE_ICU1, al,)
|
|
INTR(4,intr4, IO_ICU1, ENABLE_ICU1, al,)
|
|
INTR(5,intr5, IO_ICU1, ENABLE_ICU1, al,)
|
|
INTR(6,intr6, IO_ICU1, ENABLE_ICU1, al,)
|
|
INTR(7,intr7, IO_ICU1, ENABLE_ICU1, al,)
|
|
INTR(8,intr8, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
|
|
INTR(9,intr9, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
|
|
INTR(10,intr10, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
|
|
INTR(11,intr11, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
|
|
INTR(12,intr12, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
|
|
INTR(13,intr13, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
|
|
INTR(14,intr14, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
|
|
INTR(15,intr15, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
|
|
|
|
MCOUNT_LABEL(eintr)
|