freebsd-nq/usr.sbin/syslogd/syslog.conf.5

.\" Copyright (c) 1990, 1991, 1993
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 4. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"     @(#)syslog.conf.5	8.1 (Berkeley) 6/9/93
.\" $FreeBSD$
.\"
.Dd September 12, 2012
.Dt SYSLOG.CONF 5
.Os
.Sh NAME
.Nm syslog.conf
.Nd
.Xr syslogd 8
configuration file
.Sh DESCRIPTION
The
.Nm
file is the configuration file for the
.Xr syslogd 8
program.
It consists of
blocks of lines separated by
.Em program
and
.Em hostname
specifications (separations appear alone on their lines),
with each line containing two fields: the
.Em selector
field which specifies the types of messages and priorities to which the
line applies, and an
.Em action
field which specifies the action to be taken if a message
.Xr syslogd 8
receives matches the selection criteria.
The
.Em selector
field is separated from the
.Em action
field by one or more tab characters or spaces.
.Pp
Note that if you use spaces as separators, your
.Nm
might be incompatible with other Unices or Unix-like systems.
This functionality was added for ease of configuration
(e.g.\& it is possible to cut-and-paste into
.Nm ) ,
and to avoid possible mistakes.
This change however preserves
backwards compatibility with the old style of
.Nm
(i.e., tab characters only).
.Pp
The
.Em selectors
are encoded as a
.Em facility ,
a period
.Pq Dq \&. ,
an optional set of comparison flags
.Pq Oo \&! Oc Op <=> ,
and a
.Em level ,
with no intervening white-space.
Both the
.Em facility
and the
.Em level
are case insensitive.
.Pp
The
.Em facility
describes the part of the system generating the message, and is one of
the following keywords:
.Cm auth , authpriv , console , cron , daemon , ftp , kern , lpr ,
.Cm mail , mark , news , ntp , security , syslog , user , uucp ,
and
.Cm local0
through
.Cm local7 .
These keywords (with the exception of mark) correspond to
similar
.Dq Dv LOG_
values specified to the
.Xr openlog 3
and
.Xr syslog 3
library routines.
.Pp
The
.Em comparison flags
may be used to specify exactly what is logged.
The default comparison is
.Dq =>
(or, if you prefer,
.Dq >= ) ,
which means that messages from the specified
.Em facility
list, and of a priority
level equal to or greater than
.Em level
will be logged.
Comparison flags beginning with
.Dq Li \&!
will have their logical sense inverted.
Thus
.Dq !=info
means all levels except info and
.Dq !notice
has the same meaning as
.Dq <notice .
.Pp
The
.Em level
describes the severity of the message, and is a keyword from the
following ordered list (higher to lower):
.Cm emerg , crit , alert , err , warning , notice , info
and
.Cm debug .
These keywords correspond to
similar
.Dq Dv LOG_
values specified to the
.Xr syslog 3
library routine.
.Pp
Each block of lines is separated from the previous block by a
.Em program
or
.Em hostname
specification.
A block will only log messages corresponding to the most recent
.Em program
and
.Em hostname
specifications given.
Thus, with a block which selects
.Ql ppp
as the
.Em program ,
directly followed by a block that selects messages from the
.Em hostname
.Ql dialhost ,
the second block will only log messages
from the
.Xr ppp 8
program on dialhost.
.Pp
A
.Em program
specification is a line beginning with
.Ql #!prog
or
.Ql !prog
(the former is for compatibility with the previous syslogd, if one is sharing
.Nm
files, for example)
and the following blocks will be associated with calls to
.Xr syslog 3
from that specific program.
A
.Em program
specification for
.Ql foo
will also match any message logged by the kernel with the prefix
.Ql "foo: " .
The
.Ql #!+prog
or
.Ql !+prog
specification works just like the previous one,
and the
.Ql #!-prog
or
.Ql !-prog
specification will match any message but the ones from that
program.
Multiple programs may be listed, separated by commas:
.Ql !prog1,prog2
matches messages from either program, while
.Ql !-prog1,prog2
matches all messages but those from
.Ql prog1
or
.Ql prog2 .
.Pp
A
.Em hostname
specification of the form
.Ql #+hostname
or
.Ql +hostname
means the following blocks will be applied to messages
received from the specified hostname.
Alternatively, the
.Em hostname
specification
.Ql #-hostname
or
.Ql -hostname
causes the following blocks to be applied to messages
from any host but the one specified.
If the hostname is given as
.Ql @ ,
the local hostname will be used.
As for program specifications, multiple comma-separated
values may be specified for hostname specifications.
.Pp
A
.Em program
or
.Em hostname
specification may be reset by giving the program or hostname as
.Ql * .
.Pp
See
.Xr syslog 3
for further descriptions of both the
.Em facility
and
.Em level
keywords and their significance.
It is preferred that selections be made on
.Em facility
rather than
.Em program ,
since the latter can easily vary in a networked environment.
In some cases,
though, an appropriate
.Em facility
simply does not exist.
.Pp
If a received message matches the specified
.Em facility
and is of the specified
.Em level
.Em (or a higher level) ,
and the first word in the message after the date matches the
.Em program ,
the action specified in the
.Em action
field will be taken.
.Pp
Multiple
.Em selectors
may be specified for a single
.Em action
by separating them with semicolon
.Pq Dq \&;
characters.
It is important to note, however, that each
.Em selector
can modify the ones preceding it.
.Pp
Multiple
.Em facilities
may be specified for a single
.Em level
by separating them with comma
.Pq Dq \&,
characters.
.Pp
An asterisk
.Pq Dq *
can be used to specify all
.Em facilities ,
all
.Em levels ,
or all
.Em programs .
.Pp
The special
.Em facility
.Dq mark
receives a message at priority
.Dq info
every 20 minutes
(see
.Xr syslogd 8 ) .
This is not enabled by a
.Em facility
field containing an asterisk.
.Pp
The special
.Em level
.Dq none
disables a particular
.Em facility .
.Pp
The
.Em action
field of each line specifies the action to be taken when the
.Em selector
field selects a message.
There are five forms:
.Bl -bullet
.It
A pathname (beginning with a leading slash).
Selected messages are appended to the file.
.Pp
To ensure that kernel messages are written to disk promptly,
.Nm
calls
.Xr fsync 2
after writing messages from the kernel.
Other messages are not synced explicitly.
You may prefix a pathname with the minus sign,
.Dq - ,
to forego syncing the specified file after every kernel message.
Note that you might lose information if the system crashes
immediately following a write attempt.
Nevertheless, using the
.Dq -
option may improve performance,
especially if the kernel is logging many messages.
.It
A hostname (preceded by an at
.Pq Dq @
sign).
Selected messages are forwarded to the
.Xr syslogd 8
program on the named host.
If a port number is added after a colon
.Pq Ql :\&
then that port will be used as the destination port
rather than the usual syslog port.
IPv6 addresses can be used
by surrounding the address portion with
square brackets
.Po
.Ql [\&
and
.Ql ]\&
.Pc .
.It
A comma separated list of users.
Selected messages are written to those users
if they are logged in.
.It
An asterisk.
Selected messages are written to all logged-in users.
.It
A vertical bar
.Pq Dq \&| ,
followed by a command to pipe the selected
messages to.
The command is passed to
.Xr sh 1
for evaluation, so usual shell metacharacters or input/output
redirection can occur.
(Note however that redirecting
.Xr stdio 3
buffered output from the invoked command can cause additional delays,
or even lost output data in case a logging subprocess exited with a
signal.)
The command itself runs with
.Em stdout
and
.Em stderr
redirected to
.Pa /dev/null .
Upon receipt of a
.Dv SIGHUP ,
.Xr syslogd 8
will close the pipe to the process.
If the process did not exit
voluntarily, it will be sent a
.Dv SIGTERM
signal after a grace period of up to 60 seconds.
.Pp
The command will only be started once data arrives that should be piped
to it.
If it exited later, it will be restarted as necessary.
So if it
is desired that the subprocess should get exactly one line of input only
(which can be very resource-consuming if there are a lot of messages
flowing quickly), this can be achieved by exiting after just one line of
input.
If necessary, a script wrapper can be written to this effect.
.Pp
Unless the command is a full pipeline, it is probably useful to
start the command with
.Em exec
so that the invoking shell process does not wait for the command to
complete.
Warning: the process is started under the UID invoking
.Xr syslogd 8 ,
normally the superuser.
.El
.Pp
Blank lines and lines whose first non-blank character is a hash
.Pq Dq #
character are ignored.
If
.Ql #
is placed in the middle of the line, the
.Ql #
character and the rest of the line after it is ignored.
To prevent special meaning, the
.Ql #
character may be escaped with
.Ql \e ;
in this case preceding
.Ql \e
is removed and
.Ql #
is treated as an ordinary character.
.Sh IMPLEMENTATION NOTES
The
.Dq kern
facility is usually reserved for messages
generated by the local kernel.
Other messages logged with facility
.Dq kern
are usually translated to facility
.Dq user .
This translation can be disabled;
see
.Xr syslogd 8
for details.
.Sh FILES
.Bl -tag -width /etc/syslog.conf -compact
.It Pa /etc/syslog.conf
.Xr syslogd 8
configuration file
.El
.Sh EXAMPLES
A configuration file might appear as follows:
.Bd -literal
# Log all kernel messages, authentication messages of
# level notice or higher, and anything of level err or
# higher to the console.
# Don't log private authentication messages!
*.err;kern.*;auth.notice;authpriv.none;mail.crit	/dev/console

# Log anything (except mail) of level info or higher.
# Don't log private authentication messages!
*.info;mail.none;authpriv.none		/var/log/messages

# Log daemon messages at debug level only
daemon.=debug						/var/log/daemon.debug

# The authpriv file has restricted access.
authpriv.*						/var/log/secure

# Log all the mail messages in one place.
mail.*							/var/log/maillog

# Everybody gets emergency messages, plus log them on another
# machine.
*.emerg							*
*.emerg							@arpa.berkeley.edu

# Root and Eric get alert and higher messages.
*.alert							root,eric

# Save mail and news errors of level err and higher in a
# special file.
uucp,news.crit						/var/log/spoolerr

# Pipe all authentication messages to a filter.
auth.*					|exec /usr/local/sbin/authfilter

# Log all security messages to a separate file.
security.*						/var/log/security

# Log all writes to /dev/console to a separate file.
console.*						/var/log/console.log

# Save ftpd transactions along with mail and news
!ftpd
*.*							/var/log/spoolerr

# Log ipfw messages without syncing after every message.
!ipfw
*.*							-/var/log/ipfw
.Ed
.Sh SEE ALSO
.Xr syslog 3 ,
.Xr syslogd 8
.Sh BUGS
The effects of multiple
.Em selectors
are sometimes not intuitive.
For example
.Dq mail.crit,*.err
will select
.Dq mail
facility messages at the level of
.Dq err
or higher, not at the level of
.Dq crit
or higher.
.Pp
In networked environments, note that not all operating systems
implement the same set of facilities.
The facilities
authpriv, cron, ftp, and ntp that are known to this implementation
might be absent on the target system.
Even worse, DEC UNIX uses
facility number 10 (which is authpriv in this implementation) to
log events for their AdvFS file system.