Poul-Henning Kamp 7164022370 Make the ubsa(4) work with Huawei Exxx (tested with E169) 3G radio devices: ...

Kick the device into the right mode if it comes up as a flash-disk.

Set the buffers to a sensible 1024 bytes instead of a far too small
default.

Don't attempt to change speed, baud, parity and such, the device does
not understand it.

2008-09-25 12:00:56 +00:00

..

dsbr100io.h

…

ehci_pci.c

opt_bus.h isn't needed here. It is supposed to be for subr_bus.c only.

2008-08-30 16:23:04 +00:00

ehci.c

Fix compile

2008-08-18 10:39:59 +00:00

ehcireg.h

Add isochronous transfer support for USB 2.0

2008-08-18 04:49:58 +00:00

ehcivar.h

Add isochronous transfer support for USB 2.0

2008-08-18 04:49:58 +00:00

FILES

…

hid.c

Fix a typo: According to the hid spec, Global item #3

2008-08-18 17:05:59 +00:00

hid.h

…

if_aue.c

Replace callout_init(..., 1) with callout_init(..., CALLOUT_MPSAFE) for

2008-04-16 16:47:14 +00:00

if_auereg.h

…

if_axe.c

From the OpenBSD commit log :

2008-05-13 14:00:09 +00:00

if_axereg.h

Add private tx/rx buffer management to support large frame sizes

2007-11-10 16:23:38 +00:00

if_cdce.c

…

if_cdcereg.h

…

if_cue.c

…

if_cuereg.h

…

if_kue.c

…

if_kuereg.h

…

if_rue.c

…

if_ruereg.h

…

if_rum.c

Add the D-Link DWA-110

2008-08-19 01:44:56 +00:00

if_rumreg.h

…

if_rumvar.h

Multi-bss (aka vap) support for 802.11 devices.

2008-04-20 20:35:46 +00:00

if_udav.c

Add support for the Davicom DM9601.

2008-04-26 05:46:28 +00:00

if_udavreg.h

…

if_upgt.c

Add Conexant/Intersil PrismGT SoftMAC wireless USB driver - upgt(4).

2008-08-11 03:57:31 +00:00

if_upgtvar.h

Add Conexant/Intersil PrismGT SoftMAC wireless USB driver - upgt(4).

2008-08-11 03:57:31 +00:00

if_ural.c

Free the correct buffer list on failure.

2008-07-30 00:38:10 +00:00

if_uralreg.h

…

if_uralvar.h

Multi-bss (aka vap) support for 802.11 devices.

2008-04-20 20:35:46 +00:00

if_zyd.c

fix a another driver bug related with tsleep() during detaching that

2008-09-19 07:40:30 +00:00

if_zydfw.h

…

if_zydreg.h

rename flags and add a ZYD_FLAG_DETACHING flag to indicate we're

2008-09-10 03:40:51 +00:00

kue_fw.h

…

ohci_pci.c

opt_bus.h isn't needed here. It is supposed to be for subr_bus.c only.

2008-08-30 16:23:04 +00:00

ohci.c

Fix a benign typo that would give out an incorrect warning message.

2008-07-17 22:40:23 +00:00

ohcireg.h

…

ohcivar.h

…

rio500_usb.h

…

rt2573_ucode.h

…

sl811hs.c

…

sl811hsreg.h

…

sl811hsvar.h

…

slhci_pccard.c

…

uark.c

Allow arbitrary baud rates, not just the standard ones.

2008-01-26 04:30:48 +00:00

ubsa.c

Make the ubsa(4) work with Huawei Exxx (tested with E169) 3G radio devices:

2008-09-25 12:00:56 +00:00

ubser.c

…

ubser.h

…

uchcom.c

…

ucom.c

Keep track of the active buffer on output. For the moment, panic if

2008-09-05 20:49:45 +00:00

ucomvar.h

Keep track of the active buffer on output. For the moment, panic if

2008-09-05 20:49:45 +00:00

ucycom.c

…

udbp.c

…

udbp.h

…

ufm.c

…

ufoma.c

Recover handsfree port support.(Almost all changes are done on previous commit).

2008-09-14 16:49:51 +00:00

uftdi.c

Integrate the new MPSAFE TTY layer to the FreeBSD operating system.

2008-08-20 08:31:58 +00:00

uftdireg.h

Calculate baud rate divisor instead of allowing only a fixed set of

2008-01-25 02:41:44 +00:00

ugen.c

Don't include <sys/tty.h> in non-TTY drivers.

2008-07-24 09:54:10 +00:00

ugraphire_rdesc.h

…

uhci_pci.c

opt_bus.h is supposed to be for subr_bus.c only. There's no need for

2008-08-30 16:21:16 +00:00

uhci.c

…

uhcireg.h

…

uhcivar.h

…

uhid.c

Don't include <sys/tty.h> in non-TTY drivers.

2008-07-24 09:54:10 +00:00

uhub.c

…

uipaq.c

Make uipaq's ucom callbacks easier to read while I'm hear looking for

2008-08-31 03:39:59 +00:00

ukbd.c

Remove explicit calls to keyboard methods with their respective variants

2007-12-29 21:55:25 +00:00

ulpt.c

…

umass.c

Add support for the Alcor Card Reader (9361)

2008-08-21 20:37:38 +00:00

umct.c

…

umodem.c

All the other routines returned EIO from the param routine. Return it

2008-08-31 03:22:19 +00:00

ums.c

sc->sc_ibuf should be malloc'ed after quirks applied, as

2008-08-18 17:13:23 +00:00

uplcom.c

Kill dead code. This has been a 'todo' item for a long time and the

2008-08-31 03:08:26 +00:00

urio.c

…

usb_ethersubr.c

Remove NETISR_MPSAFE, which allows specific netisr handlers to be directly

2008-07-04 00:21:38 +00:00

usb_ethersubr.h

…

usb_if.m

…

usb_mem.c

…

usb_mem.h

…

usb_port.h

…

usb_quirks.c

Add support for the CyberPower CP1500AVRLCD.

2008-09-09 19:59:51 +00:00

usb_quirks.h

…

usb_subr.c

…

usb.c

Drop Giant before calling kproc_exit(), so we don't trigger assertion in

2008-05-20 12:34:30 +00:00

usb.h

Add isochronous transfer support for USB 2.0

2008-08-18 04:49:58 +00:00

usbcdc.h

…

usbdevs

Add a vendor ID for 3G Green Green Globe Co., Ltd, found in

2008-09-19 09:04:06 +00:00

usbdi_util.c

…

usbdi_util.h

…

usbdi.c

Correct cache handling for xfer requests marked URQ_REQUEST: many (if not

2008-03-20 16:04:13 +00:00

usbdi.h

add support for %b printing of request + xfer flags

2008-03-20 03:09:59 +00:00

usbdivar.h

add support for %b printing of request + xfer flags

2008-03-20 03:09:59 +00:00

usbhid.h

…

uscanner.c

Add USB ids for the Epson DX7400 / CX7300 multifunction scanner printer

2008-06-27 10:30:08 +00:00

uslcom.c

Oops, I accidently concatenated uslcom.[c4] multiple times before the

2008-03-05 14:18:29 +00:00

uvisor.c

Style nit: s/^ }/}/

2008-08-23 23:28:33 +00:00

uvscom.c

Kill dead code. This has been a 'todo' item for a long time and the

2008-08-31 03:08:26 +00:00

uxb360gp_rdesc.h

Change my email address to the one from the FreeBSD project.

2008-05-24 18:35:55 +00:00