bcd46c600a
is currently conditional on both the GEOM and GEOM_GPT options to
avoid getting GPT by default and having the MBR and GPT classes
clash.
The correct behaviour of the MBR class would be to back-off (reject)
a MBR if it's a Protective MBR (a MBR with a single partition of type
0xEE that spans the whole disk (as far as the MBR is concerned).
The correct behaviour if the GPT class would be to back-off (reject)
a GPT if there's a MBR that's not a Protective MBR.
At this stage it's inconvenient to destroy a good MBR when working
with GPTs that it's more convenient to have the MBR class back-off
when it detects the GPT signature on disk and have the GPT class
ignore the MBR.
In sys/gpt.h UUIDs (GUIDs) for the following FreeBSD partitions
have been defined:
GPT_ENT_TYPE_FREEBSD
FreeBSD slice with disklabel. This is the equivalent of
the well-known FreeBSD MBR partition type.
GPT_ENT_TYPE_FREEBSD_{SWAP|UFS|UFS2|VINUM}
FreeBSD partitions in the context of disklabel. This is
speculating on the idea to use the GPT to hold partitions
instead if slices and removing the fixed (and low) limits
we have on the number of partitions.
This commit lacks a GPT image for the regression suite.
534 lines
14 KiB
Plaintext
534 lines
14 KiB
Plaintext
# $FreeBSD$
|
|
#
|
|
# On the handling of kernel options
|
|
#
|
|
# All kernel options should be listed in NOTES, with suitable
|
|
# descriptions. Negative options (options that make some code not
|
|
# compile) should be commented out; LINT (generated from NOTES) should
|
|
# compile as much code as possible. Try to structure option-using
|
|
# code so that a single option only switch code on, or only switch
|
|
# code off, to make it possible to have a full compile-test. If
|
|
# necessary, you can check for COMPILING_LINT to get maximum code
|
|
# coverage.
|
|
#
|
|
# All new options shall also be listed in either "conf/options" or
|
|
# "conf/options.<machine>". Options that affect a single source-file
|
|
# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
|
|
# that affect multiple files should either go in "opt_global.h" if
|
|
# this is a kernel-wide option (used just about everywhere), or in
|
|
# "opt_<option-name-in-lower-case>.h" if it affect only some files.
|
|
# Note that the effect of listing only an option without a
|
|
# header-file-name in conf/options (and cousins) is that the last
|
|
# convention is followed.
|
|
#
|
|
# This handling scheme is not yet fully implemented.
|
|
#
|
|
#
|
|
# Format of this file:
|
|
# Option name filename
|
|
#
|
|
# If filename is missing, the default is
|
|
# opt_<name-of-option-in-lower-case>.h
|
|
|
|
# Adaptec Array Controller driver options
|
|
AAC_COMPAT_LINUX opt_aac.h # Enable the linux ioctl interface
|
|
|
|
AAC_DEBUG opt_aac.h # Debugging levels:
|
|
# 0 - quiet, only emit warnings
|
|
# 1 - noisy, emit major function
|
|
# points and things done
|
|
# 2 - extremely noisy, emit trace
|
|
# items in loops, etc.
|
|
|
|
# Adaptec aic7xxx SCSI controller options
|
|
AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory
|
|
# mapped I/O
|
|
|
|
AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable
|
|
# targetmode operations.
|
|
|
|
AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our
|
|
# configuration prom.
|
|
|
|
AHC_DEBUG_SEQUENCER opt_aic7xxx.h # Enable diagnostic sequencer code
|
|
|
|
ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory
|
|
# mapped I/O
|
|
|
|
# Miscellaneous options.
|
|
GEOM opt_geom.h
|
|
GEOM_GPT opt_geom.h # Add support for GUID Partition
|
|
# Tables (GPTs).
|
|
ADAPTIVE_MUTEXES
|
|
COMPAT_43 opt_compat.h
|
|
COMPAT_SUNOS opt_compat.h
|
|
COMPILING_LINT opt_global.h
|
|
CY_PCI_FASTINTR
|
|
DDB
|
|
DDB_NOKLDSYM opt_ddb.h
|
|
DDB_UNATTENDED opt_ddb.h
|
|
GDB_REMOTE_CHAT opt_ddb.h
|
|
NODEVFS opt_devfs.h
|
|
HW_WDOG
|
|
KTRACE
|
|
LIBICONV
|
|
MD_ROOT opt_md.h
|
|
MD_ROOT_SIZE opt_md.h
|
|
NTIMECOUNTER opt_ntp.h
|
|
NSWAPDEV opt_swap.h
|
|
PPS_SYNC opt_ntp.h
|
|
QUOTA
|
|
SPX_HACK
|
|
SUIDDIR opt_suiddir.h
|
|
SYSVMSG opt_sysvipc.h
|
|
SYSVSEM opt_sysvipc.h
|
|
SYSVSHM opt_sysvipc.h
|
|
SHMALL opt_sysvipc.h
|
|
SHMMAX opt_sysvipc.h
|
|
SHMMAXPGS opt_sysvipc.h
|
|
SHMMIN opt_sysvipc.h
|
|
SHMMNI opt_sysvipc.h
|
|
SHMSEG opt_sysvipc.h
|
|
SEMMAP opt_sysvipc.h
|
|
SEMMNI opt_sysvipc.h
|
|
SEMMNS opt_sysvipc.h
|
|
SEMMNU opt_sysvipc.h
|
|
SEMMSL opt_sysvipc.h
|
|
SEMOPM opt_sysvipc.h
|
|
SEMUME opt_sysvipc.h
|
|
MSGMNB opt_sysvipc.h
|
|
MSGMNI opt_sysvipc.h
|
|
MSGSEG opt_sysvipc.h
|
|
MSGSSZ opt_sysvipc.h
|
|
MSGTQL opt_sysvipc.h
|
|
VFS_AIO
|
|
|
|
# POSIX kernel options
|
|
P1003_1B opt_posix.h
|
|
_KPOSIX_PRIORITY_SCHEDULING opt_posix.h
|
|
_KPOSIX_VERSION opt_posix.h
|
|
|
|
# TrustedBSD and POSIX.1e Kernel Options
|
|
CAPABILITIES opt_cap.h
|
|
|
|
# Do we want the config file compiled into the kernel?
|
|
INCLUDE_CONFIG_FILE opt_config.h
|
|
|
|
# Options for static filesystems. These should only be used at config
|
|
# time, since the corresponding lkms cannot work if there are any static
|
|
# dependencies. Unusability is enforced by hiding the defines for the
|
|
# options in a never-included header.
|
|
CD9660 opt_dontuse.h
|
|
CODA opt_dontuse.h
|
|
EXT2FS opt_dontuse.h
|
|
FDESCFS opt_dontuse.h
|
|
LINPROCFS opt_dontuse.h
|
|
MSDOSFS opt_dontuse.h
|
|
NULLFS opt_dontuse.h
|
|
NWFS opt_dontuse.h
|
|
PORTALFS opt_dontuse.h
|
|
PROCFS opt_dontuse.h
|
|
PSEUDOFS opt_dontuse.h
|
|
UMAPFS opt_dontuse.h
|
|
NTFS opt_dontuse.h
|
|
HPFS opt_dontuse.h
|
|
UNIONFS opt_dontuse.h
|
|
UDF opt_dontuse.h
|
|
|
|
# Broken - ffs_snapshot() dependency from ufs_lookup() :-(
|
|
FFS opt_ffs_broken_fixme.h
|
|
|
|
# These static filesystems has one slightly bogus static dependency in
|
|
# sys/i386/i386/autoconf.c. If any of these filesystems are
|
|
# statically compiled into the kernel, code for mounting them as root
|
|
# filesystems will be enabled - but look below.
|
|
NFSCLIENT opt_nfs.h
|
|
NFSSERVER opt_nfs.h
|
|
|
|
# If you are following the conditions in the copyright,
|
|
# you can enable soft-updates which will speed up a lot of thigs
|
|
# and make the system safer from crashes at the same time.
|
|
# otherwise a STUB module will be compiled in.
|
|
SOFTUPDATES opt_ffs.h
|
|
|
|
# Enabling this option turns on support for Access Control Lists in UFS,
|
|
# which can be used to support high security configurations. Depends on
|
|
# UFS_EXTATTR.
|
|
UFS_ACL opt_ufs.h
|
|
|
|
# Enabling this option turns on support for extended attributes in UFS-based
|
|
# filesystems, which can be used to support high security configurations
|
|
# as well as new filesystem features.
|
|
UFS_EXTATTR opt_ufs.h
|
|
UFS_EXTATTR_AUTOSTART opt_ufs.h
|
|
|
|
# Enable fast hash lookups for large directories on UFS-based filesystems.
|
|
UFS_DIRHASH opt_ufs.h
|
|
|
|
# The above static dependencies are planned removed, with a
|
|
# <filesystem>_ROOT option to control if it usable as root. This list
|
|
# allows these options to be present in config files already (though
|
|
# they won't make any difference yet).
|
|
NFS_ROOT opt_nfsroot.h
|
|
|
|
# Options used only in subr_param.c.
|
|
HZ opt_param.h
|
|
MAXFILES opt_param.h
|
|
NBUF opt_param.h
|
|
NMBCLUSTERS opt_param.h
|
|
NSFBUFS opt_param.h
|
|
VM_BCACHE_SIZE_MAX opt_param.h
|
|
VM_SWZONE_SIZE_MAX opt_param.h
|
|
MAXUSERS
|
|
DFLDSIZ opt_param.h
|
|
MAXDSIZ opt_param.h
|
|
MAXSSIZ opt_param.h
|
|
|
|
# Generic SCSI options.
|
|
CAM_MAX_HIGHPOWER opt_cam.h
|
|
CAMDEBUG opt_cam.h
|
|
CAM_DEBUG_DELAY opt_cam.h
|
|
CAM_DEBUG_BUS opt_cam.h
|
|
CAM_DEBUG_TARGET opt_cam.h
|
|
CAM_DEBUG_LUN opt_cam.h
|
|
CAM_DEBUG_FLAGS opt_cam.h
|
|
CAM_NEW_TRAN_CODE opt_cam.h
|
|
SCSI_DELAY opt_scsi.h
|
|
SCSI_NO_SENSE_STRINGS opt_scsi.h
|
|
SCSI_NO_OP_STRINGS opt_scsi.h
|
|
|
|
|
|
|
|
# Options used only in cam/scsi/scsi_cd.c
|
|
CHANGER_MIN_BUSY_SECONDS opt_cd.h
|
|
CHANGER_MAX_BUSY_SECONDS opt_cd.h
|
|
|
|
# Options used only in cam/scsi/scsi_sa.c.
|
|
SA_IO_TIMEOUT opt_sa.h
|
|
SA_SPACE_TIMEOUT opt_sa.h
|
|
SA_REWIND_TIMEOUT opt_sa.h
|
|
SA_ERASE_TIMEOUT opt_sa.h
|
|
SA_1FM_AT_EOD opt_sa.h
|
|
|
|
# Options used only in cam/scsi/scsi_pt.c
|
|
SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
|
|
|
|
# Options used only in cam/scsi/scsi_ses.c
|
|
SES_ENABLE_PASSTHROUGH opt_ses.h
|
|
|
|
# Options used in dev/sym/ (Symbios SCSI driver).
|
|
SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
|
|
# Allows the ncr to take precedence
|
|
# 1 (1<<0) -> 810a, 860
|
|
# 2 (1<<1) -> 825a, 875, 885, 895
|
|
# 4 (1<<2) -> 895a, 896, 1510d
|
|
SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
|
|
# disabled:0 (default), enabled:1
|
|
SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
|
|
# disabled:0, enabled:1 (default)
|
|
SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
|
|
# default:8, range:[1..64]
|
|
|
|
# Options used only in pci/ncr.c
|
|
SCSI_NCR_DEBUG opt_ncr.h
|
|
SCSI_NCR_MAX_SYNC opt_ncr.h
|
|
SCSI_NCR_MAX_WIDE opt_ncr.h
|
|
SCSI_NCR_MYADDR opt_ncr.h
|
|
|
|
# Options used only in dev/isp/*
|
|
ISP_TARGET_MODE opt_isp.h
|
|
ISP_FW_CRASH_DUMP opt_isp.h
|
|
|
|
# Options used in the 'ata' ATA/ATAPI driver
|
|
ACD_DEBUG opt_ata.h
|
|
AST_DEBUG opt_ata.h
|
|
ATAPI_DEBUG opt_ata.h
|
|
ATA_DEBUG opt_ata.h
|
|
ATA_STATIC_ID opt_ata.h
|
|
DEV_ATADISK opt_ata.h
|
|
DEV_ATAPICD opt_ata.h
|
|
DEV_ATAPIST opt_ata.h
|
|
DEV_ATAPIFD opt_ata.h
|
|
|
|
# Net stuff.
|
|
ACCEPT_FILTER_DATA
|
|
ACCEPT_FILTER_HTTP
|
|
BOOTP opt_bootp.h
|
|
BOOTP_COMPAT opt_bootp.h
|
|
BOOTP_NFSROOT opt_bootp.h
|
|
BOOTP_NFSV3 opt_bootp.h
|
|
BOOTP_WIRED_TO opt_bootp.h
|
|
BRIDGE opt_bdg.h
|
|
ETHER_II opt_ef.h
|
|
ETHER_8023 opt_ef.h
|
|
ETHER_8022 opt_ef.h
|
|
ETHER_SNAP opt_ef.h
|
|
MROUTING opt_mrouting.h
|
|
INET opt_inet.h
|
|
SOMAXCONN opt_inet.h
|
|
INET6 opt_inet6.h
|
|
IPSEC opt_ipsec.h
|
|
IPSEC_ESP opt_ipsec.h
|
|
IPSEC_DEBUG opt_ipsec.h
|
|
IPDIVERT
|
|
DUMMYNET opt_ipdn.h
|
|
IPFILTER opt_ipfilter.h
|
|
IPFILTER_LOG opt_ipfilter.h
|
|
IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
|
|
PFIL_HOOKS opt_pfil_hooks.h
|
|
IPFIREWALL opt_ipfw.h
|
|
IPFIREWALL_VERBOSE opt_ipfw.h
|
|
IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
|
|
IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
|
|
IPFIREWALL_FORWARD opt_ipfw.h
|
|
IPV6FIREWALL opt_ip6fw.h
|
|
IPV6FIREWALL_VERBOSE opt_ip6fw.h
|
|
IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h
|
|
IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h
|
|
IPSTEALTH
|
|
IPX opt_ipx.h
|
|
IPXIP opt_ipx.h
|
|
IPTUNNEL opt_ipx.h
|
|
LIBMCHAIN
|
|
NCP opt_ncp.h
|
|
NETATALK opt_atalk.h
|
|
PPP_BSDCOMP opt_ppp.h
|
|
PPP_DEFLATE opt_ppp.h
|
|
PPP_FILTER opt_ppp.h
|
|
RANDOM_IP_ID
|
|
SLIP_IFF_OPTS opt_slip.h
|
|
TCPDEBUG
|
|
TCP_DROP_SYNFIN opt_tcp_input.h
|
|
XBONEHACK
|
|
|
|
# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
|
|
# Each netgraph node type can be either be compiled into the kernel
|
|
# or loaded dynamically. To get the former, include the corresponding
|
|
# option below. Each type has its own man page, e.g. ng_async(4).
|
|
NETGRAPH
|
|
NETGRAPH_ASYNC opt_netgraph.h
|
|
NETGRAPH_BPF opt_netgraph.h
|
|
NETGRAPH_BRIDGE opt_netgraph.h
|
|
NETGRAPH_CISCO opt_netgraph.h
|
|
NETGRAPH_ECHO opt_netgraph.h
|
|
NETGRAPH_ETHER opt_netgraph.h
|
|
NETGRAPH_FRAME_RELAY opt_netgraph.h
|
|
NETGRAPH_GIF opt_netgraph.h
|
|
NETGRAPH_GIF_DEMUX opt_netgraph.h
|
|
NETGRAPH_HOLE opt_netgraph.h
|
|
NETGRAPH_IFACE opt_netgraph.h
|
|
NETGRAPH_IP_INPUT opt_netgraph.h
|
|
NETGRAPH_KSOCKET opt_netgraph.h
|
|
NETGRAPH_LMI opt_netgraph.h
|
|
# MPPC compression requires proprietary files (not included)
|
|
NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
|
|
NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
|
|
NETGRAPH_ONE2MANY opt_netgraph.h
|
|
NETGRAPH_PPP opt_netgraph.h
|
|
NETGRAPH_PPPOE opt_netgraph.h
|
|
NETGRAPH_PPTPGRE opt_netgraph.h
|
|
NETGRAPH_RFC1490 opt_netgraph.h
|
|
NETGRAPH_SOCKET opt_netgraph.h
|
|
NETGRAPH_SPLIT opt_netgraph.h
|
|
NETGRAPH_TEE opt_netgraph.h
|
|
NETGRAPH_TTY opt_netgraph.h
|
|
NETGRAPH_UI opt_netgraph.h
|
|
NETGRAPH_VJC opt_netgraph.h
|
|
|
|
# DRM options
|
|
DRM_LINUX opt_drm.h
|
|
DRM_DEBUG opt_drm.h
|
|
|
|
# ATM (HARP version)
|
|
ATM_CORE opt_atm.h
|
|
ATM_IP opt_atm.h
|
|
ATM_SIGPVC opt_atm.h
|
|
ATM_SPANS opt_atm.h
|
|
ATM_UNI opt_atm.h
|
|
|
|
# XXX Conflict: # of devices vs network protocol (Native ATM).
|
|
# This makes "atm.h" unusable.
|
|
NATM opt_natm.h
|
|
|
|
DPT_ALLOW_MEMIO opt_dpt.h # Allow PCI devices to use memory
|
|
# mapped I/O
|
|
# DPT driver debug flags
|
|
DPT_MEASURE_PERFORMANCE opt_dpt.h
|
|
DPT_HANDLE_TIMEOUTS opt_dpt.h
|
|
DPT_TIMEOUT_FACTOR opt_dpt.h
|
|
DPT_LOST_IRQ opt_dpt.h
|
|
DPT_RESET_HBA opt_dpt.h
|
|
|
|
# Adaptec ASR and DPT V/VI controller options
|
|
ASR_MEASURE_PERFORMANCE opt_asr.h
|
|
|
|
# Misc debug flags. Most of these should probably be replaced with
|
|
# 'DEBUG', and then let people recompile just the interesting modules
|
|
# with 'make CC="cc -DDEBUG"'.
|
|
CLUSTERDEBUG opt_debug_cluster.h
|
|
DEBUG_1284 opt_ppb_1284.h
|
|
VP0_DEBUG opt_vpo.h
|
|
LPT_DEBUG opt_lpt.h
|
|
PLIP_DEBUG opt_plip.h
|
|
LOCKF_DEBUG opt_debug_lockf.h
|
|
NPX_DEBUG opt_debug_npx.h
|
|
NETATALKDEBUG opt_atalk.h
|
|
SI_DEBUG opt_debug_si.h
|
|
|
|
# Fb options
|
|
FB_DEBUG opt_fb.h
|
|
FB_INSTALL_CDEV opt_fb.h
|
|
|
|
# ppbus related options
|
|
PERIPH_1284 opt_ppb_1284.h
|
|
DONTPROBE_1284 opt_ppb_1284.h
|
|
|
|
# smbus related options
|
|
ENABLE_ALART opt_intpm.h
|
|
|
|
# These cause changes all over the kernel
|
|
BLKDEV_IOSIZE opt_global.h
|
|
DEBUG opt_global.h
|
|
DEBUG_LOCKS opt_global.h
|
|
DEBUG_VFS_LOCKS opt_global.h
|
|
LOOKUP_SHARED opt_global.h
|
|
DIAGNOSTIC opt_global.h
|
|
ENABLE_VFS_IOOPT opt_global.h
|
|
INVARIANT_SUPPORT opt_global.h
|
|
INVARIANTS opt_global.h
|
|
REGRESSION opt_global.h
|
|
RESTARTABLE_PANICS opt_global.h
|
|
VFS_BIO_DEBUG opt_global.h
|
|
|
|
# These are VM related options
|
|
VM_KMEM_SIZE opt_vm.h
|
|
VM_KMEM_SIZE_SCALE opt_vm.h
|
|
VM_KMEM_SIZE_MAX opt_vm.h
|
|
NO_SWAPPING opt_vm.h
|
|
MALLOC_PROFILE opt_vm.h
|
|
PQ_NOOPT opt_vmpage.h
|
|
PQ_NORMALCACHE opt_vmpage.h
|
|
PQ_MEDIUMCACHE opt_vmpage.h
|
|
PQ_LARGECACHE opt_vmpage.h
|
|
PQ_HUGECACHE opt_vmpage.h
|
|
PQ_CACHESIZE opt_vmpage.h
|
|
|
|
# Standard SMP options
|
|
SMP opt_global.h
|
|
|
|
# Size of the kernel message buffer
|
|
MSGBUF_SIZE opt_msgbuf.h
|
|
|
|
# PCI related options
|
|
PCI_ENABLE_IO_MODES opt_pci.h
|
|
PCI_ALLOW_UNSUPPORTED_IO_RANGE opt_pci.h
|
|
|
|
# NFS options
|
|
NFS_MINATTRTIMO opt_nfs.h
|
|
NFS_MAXATTRTIMO opt_nfs.h
|
|
NFS_MINDIRATTRTIMO opt_nfs.h
|
|
NFS_MAXDIRATTRTIMO opt_nfs.h
|
|
NFS_GATHERDELAY opt_nfs.h
|
|
NFS_WDELAYHASHSIZ opt_nfs.h
|
|
NFS_DEBUG opt_nfs.h
|
|
|
|
# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
|
|
OVERRIDE_CARD opt_bktr.h
|
|
OVERRIDE_TUNER opt_bktr.h
|
|
OVERRIDE_DBX opt_bktr.h
|
|
OVERRIDE_MSP opt_bktr.h
|
|
BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
|
|
BROOKTREE_ALLOC_PAGES opt_bktr.h
|
|
BKTR_OVERRIDE_CARD opt_bktr.h
|
|
BKTR_OVERRIDE_TUNER opt_bktr.h
|
|
BKTR_OVERRIDE_DBX opt_bktr.h
|
|
BKTR_OVERRIDE_MSP opt_bktr.h
|
|
BKTR_SYSTEM_DEFAULT opt_bktr.h
|
|
BKTR_ALLOC_PAGES opt_bktr.h
|
|
BKTR_USE_PLL opt_bktr.h
|
|
BKTR_GPIO_ACCESS opt_bktr.h
|
|
BKTR_NO_MSP_RESET opt_bktr.h
|
|
BKTR_430_FX_MODE opt_bktr.h
|
|
BKTR_SIS_VIA_MODE opt_bktr.h
|
|
BKTR_USE_FREEBSD_SMBUS opt_bktr.h
|
|
|
|
# meteor opt_meteor.h
|
|
METEOR_ALLOC_PAGES opt_meteor.h
|
|
METEOR_TEST_VIDEO opt_meteor.h
|
|
METEOR_SYSTEM_DEFAULT opt_meteor.h
|
|
METEOR_DEALLOC_PAGES opt_meteor.h
|
|
METEOR_DEALLOC_ABOVE opt_meteor.h
|
|
|
|
# Various mi ISA bus flags
|
|
COM_ESP opt_sio.h
|
|
COM_MULTIPORT opt_sio.h
|
|
BREAK_TO_DEBUGGER opt_comconsole.h
|
|
ALT_BREAK_TO_DEBUGGER opt_comconsole.h
|
|
DEV_ISA opt_isa.h
|
|
|
|
# Include tweaks for running under the SimOS machine simulator.
|
|
SIMOS opt_simos.h
|
|
|
|
# options for bus/device framework
|
|
BUS_DEBUG opt_bus.h
|
|
|
|
# options for USB support
|
|
UHCI_DEBUG opt_usb.h
|
|
OHCI_DEBUG opt_usb.h
|
|
USB_DEBUG opt_usb.h
|
|
UGEN_DEBUG opt_usb.h
|
|
UHID_DEBUG opt_usb.h
|
|
UHUB_DEBUG opt_usb.h
|
|
UKBD_DEBUG opt_usb.h
|
|
ULPT_DEBUG opt_usb.h
|
|
UMASS_DEBUG opt_usb.h
|
|
UMS_DEBUG opt_usb.h
|
|
URIO_DEBUG opt_usb.h
|
|
UKBD_DFLT_KEYMAP opt_ukbd.h
|
|
|
|
# Vinum options
|
|
VINUMDEBUG opt_vinum.h
|
|
|
|
# Embedded system options
|
|
INIT_PATH opt_init_path.h
|
|
|
|
ROOTDEVNAME opt_rootdevname.h
|
|
|
|
FDC_DEBUG opt_fdc.h
|
|
PCFCLOCK_VERBOSE opt_pcfclock.h
|
|
PCFCLOCK_MAX_RETRIES opt_pcfclock.h
|
|
TDFX_LINUX opt_tdfx.h
|
|
|
|
KTR opt_global.h
|
|
KTR_MASK opt_ktr.h
|
|
KTR_CPUMASK opt_ktr.h
|
|
KTR_COMPILE opt_global.h
|
|
KTR_ENTRIES opt_global.h
|
|
KTR_VERBOSE opt_ktr.h
|
|
MUTEX_DEBUG opt_global.h
|
|
WITNESS opt_global.h
|
|
WITNESS_DDB opt_witness.h
|
|
WITNESS_SKIPSPIN opt_witness.h
|
|
|
|
# options for ACPI support
|
|
ACPI_DEBUG opt_acpi.h
|
|
ACPI_NO_SEMAPHORES opt_acpi.h
|
|
ACPI_MAX_THREADS opt_acpi.h
|
|
|
|
# options for DEVFS, see sys/fs/devfs/devfs.h
|
|
NDEVFSINO opt_devfs.h
|
|
NDEVFSOVERFLOW opt_devfs.h
|
|
|
|
# various 'device presence' options.
|
|
DEV_MCA opt_mca.h
|
|
DEV_BPF opt_bpf.h
|
|
|
|
# ed driver
|
|
ED_NO_MIIBUS opt_ed.h
|
|
|
|
# Polling device handling
|
|
DEVICE_POLLING opt_global.h
|
|
|
|
# Mutex profiling
|
|
MUTEX_PROFILING opt_global.h
|