Adrian Chadd 1844ff169f * Reduce the PCU lock overhead a little by only re-acquiring it if we ...

actually do have to reinitialise the RX side of things after an RX
  descriptor EOL error.

* Revert a change of mine from quite a while ago - don't shortcut the
  RX initialisation path.  There's a RX FIFO bug in the earlier chips
  (I'm not sure when it was fixed in this series, but it's fixed
  with the AR9380 and later) which causes the same RX descriptor to
  be written to over and over.  This causes the descriptor to be
  marked as "done", and this ends up causing the whole RX path to
  go very strange.  This should fixed the "kickpcu; handled X packets"
  message spam where "X" is consistently small.

2013-02-16 19:11:57 +00:00

..

ath_dfs/null

Add a method to explicitly disable radar reporting if required.

2013-01-02 01:36:10 +00:00

ath_hal

The encryption type field needs to be preserved for each descriptor

2013-02-09 02:42:01 +00:00

ath_rate

I've had some feedback that CCK rates are more reliable than MCS 0

2012-10-31 06:35:50 +00:00

ah_osdep.c

Fix the HAL debugging to only use one bit to mark a message as unmaskable.

2012-07-01 02:34:32 +00:00

ah_osdep.h

Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.

2012-08-05 10:12:27 +00:00

if_ath_ahb.c

Create a new TX lock specifically for queuing frames.

2013-02-07 07:50:16 +00:00

if_ath_alq.c

Extend the timestamp to be a timeval, rather than ticks.

2013-02-11 02:48:49 +00:00

if_ath_alq.h

Extend the timestamp to be a timeval, rather than ticks.

2013-02-11 02:48:49 +00:00

if_ath_beacon.c

Add a quick work-around if ath_beacon_config() to not die if it's called

2013-01-17 16:26:40 +00:00

if_ath_beacon.h

Extend the beacon code slightly to support AP mode beaconing for the

2012-08-11 23:26:19 +00:00

if_ath_debug.c

TX EDMA debugging fixes:

2012-11-05 07:08:45 +00:00

if_ath_debug.h

Add a debug method to dump the EDMA TX status descriptor contents out.

2012-11-03 04:53:44 +00:00

if_ath_keycache.c

Don't allocate or program a key for the AR5210.

2012-11-19 23:54:05 +00:00

if_ath_keycache.h

Add a 'vap' to ath_keyset().

2011-11-08 19:25:52 +00:00

if_ath_led.c

Bring over the initial 802.11n bluetooth coexistence support code.

2012-06-26 22:16:53 +00:00

if_ath_led.h

Refactor out the software LED config code into a common function, called

2011-12-26 05:46:22 +00:00

if_ath_misc.h

Pull out the if_transmit() work and revert back to ath_start().

2013-02-13 05:32:19 +00:00

if_ath_pci.c

Create a new TX lock specifically for queuing frames.

2013-02-07 07:50:16 +00:00

if_ath_rx_edma.c

Mechanically substitute flags from historic mbuf allocator with

2012-12-04 09:32:43 +00:00

if_ath_rx_edma.h

Begin abstracting out the RX path in preparation for RX EDMA support.

2012-07-03 06:59:12 +00:00

if_ath_rx.c

* Reduce the PCU lock overhead a little by only re-acquiring it if we

2013-02-16 19:11:57 +00:00

if_ath_rx.h

Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code.

2012-07-10 00:02:19 +00:00

if_ath_spectral.c

Fix format size.

2013-01-08 22:42:15 +00:00

if_ath_spectral.h

Add a new (skeleton) spectral mode manager module.

2013-01-02 03:59:02 +00:00

if_ath_sysctl.c

Implement frame (data) transmission using if_transmit(), rather than

2013-01-15 18:01:23 +00:00

if_ath_sysctl.h

Break out most of the HAL related tweaks into a per-HAL instance,

2011-06-23 02:38:36 +00:00

if_ath_tdma.c

Pull out the debugging code from the critical path and make sure it

2012-11-28 01:55:22 +00:00

if_ath_tdma.h

Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.

2012-05-20 02:49:42 +00:00

if_ath_tsf.h

Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].

2012-05-20 02:05:10 +00:00

if_ath_tx_edma.c

Methodize the process of adding the software TX queue to the taskqueue.

2013-02-07 02:15:25 +00:00

if_ath_tx_edma.h

Begin separating out the TX DMA setup in preparation for TX EDMA support.

2012-07-23 03:52:18 +00:00

if_ath_tx_ht.c

Fix a corner case that I noticed with the AR5416 (and it's currently

2013-02-08 09:07:03 +00:00

if_ath_tx_ht.h

Introduce TX aggregation and software TX queue management

2011-11-08 22:43:13 +00:00

if_ath_tx.c

Pull out the if_transmit() work and revert back to ath_start().

2013-02-13 05:32:19 +00:00

if_ath_tx.h

ALQ logging enhancements:

2012-11-16 19:57:16 +00:00

if_ath.c

Pull out the if_transmit() work and revert back to ath_start().

2013-02-13 05:32:19 +00:00

if_athdfs.h

Add a method to explicitly disable radar reporting if required.

2013-01-02 01:36:10 +00:00

if_athioctl.h

Add support for triggering spectral scan upon a channel reset/change.

2013-01-08 22:15:13 +00:00

if_athrate.h

Create an ioctl API for fetching the current rate control information.

2012-07-20 01:27:20 +00:00

if_athvar.h

Pull out the if_transmit() work and revert back to ath_start().

2013-02-13 05:32:19 +00:00